Migrate data from a PolarDB for MySQL cluster to an AnalyticDB for PostgreSQL instance - Data Transmission Service

This topic describes how to migrate data from a PolarDB for MySQL cluster to an AnalyticDB for PostgreSQL instance by using Data Transmission Service (DTS).

Prerequisites

The destination AnalyticDB for PostgreSQL instance is created. For more information, see Create an AnalyticDB for PostgreSQL instance.
The available storage space of the destination AnalyticDB for PostgreSQL instance is larger than the total size of the data in the source PolarDB for MySQL cluster.

Limits

Note

During schema migration, DTS migrates foreign keys from the source database to the destination database.
During full data migration and incremental data migration, DTS temporarily disables the constraint check and cascade operations on foreign keys at the session level. If you perform the cascade and delete operations on the source database during data migration, data inconsistency may occur.


Category	Description
Limits on the source database	The server to which the source database belongs must have sufficient outbound bandwidth. Otherwise, the data migration speed decreases. The tables to be migrated must have PRIMARY KEY or UNIQUE constraints, and all fields must be unique. Otherwise, the destination database may contain duplicate data records. If you select tables as the objects to be migrated and you want to edit the tables, such as renaming tables or columns in the destination database, you can migrate up to 1,000 tables in a single data migration task. If you run a task to migrate more than 1,000 tables, a request error occurs. In this case, we recommend that you configure multiple tasks to migrate the tables or configure a task to migrate the entire database. If you need to migrate incremental data, the binary logging feature must be enabled and the loose_polar_log_bin parameter must be set to on. Otherwise, error messages are returned during the precheck and the data migration task cannot be started. For more information about how to enable the binary logging feature and set the loose_polar_log_bin parameter, see Enable binary logging and Modify parameters. Note If you enable the binary logging feature for a PolarDB for MySQL cluster, you are charged for the storage space that is occupied by binary logs. For an incremental data migration task, the binary logs of the source database must be retained for more than 24 hours. For a full data and incremental data migration task, the binary logs of the source database must be retained for at least seven days. Otherwise, DTS may fail to obtain the binary logs and the task may fail. In exceptional circumstances, data inconsistency or loss may occur. After full data migration is complete, you can set the retention period to more than 24 hours. Make sure that you set the retention period of binary logs in accordance with the preceding requirements. Otherwise, the Service Level Agreement (SLA) of DTS does not guarantee service reliability or performance. Limits on operations to be performed on the source database: During schema migration and full data migration, do not perform DDL operations to change the schemas of databases or tables. Otherwise, the data migration task fails. If you perform only full data migration, do not write data to the source database during data migration. Otherwise, data inconsistency may occur between the source and destination databases. To ensure data consistency, we recommend that you select Schema Migration, Full Data Migration, and Incremental Data Migration as the migration types.
Other limits	Read-only nodes of the source PolarDB for MySQL cluster cannot be migrated. During full data migration, DTS uses read and write resources of the source and destination databases. This may increase the loads on the database servers. Before you migrate data, evaluate the impact of data migration on the performance of the source and destination databases. We recommend that you migrate data during off-peak hours. DTS uses the `ROUND(COLUMN,PRECISION)` function to retrieve values from columns of the FLOAT or DOUBLE data type. If you do not specify a precision, DTS sets the precision for the FLOAT data type to 38 digits and the precision for the DOUBLE data type to 308 digits. You must check whether the precision settings meet your business requirements. DTS attempts to resume data migration tasks that failed within the last seven days. Before you switch workloads to the destination database, stop or release the data migration task. You can also execute the `REVOKE` statement to revoke the write permissions from the accounts used by DTS to access the destination database. Otherwise, the data in the source database overwrites the data in the destination database after a failed task is resumed.
Usage notes	DTS executes the CREATE DATABASE IF NOT EXISTS 'test' statement in the source database as scheduled to move forward the binary log file position. During full data migration, concurrent INSERT operations cause fragmentation in the tables of the destination database. After full data migration is complete, the size of used tablespace of the destination database is larger than that of the source database.

Billing


Migration type	Instance configuration fee	Internet traffic fee
Schema migration and full data migration	Free of charge.	Charged only when data is migrated from Alibaba Cloud over the Internet. For more information, see Billing overview.
Incremental data migration	Charged. For more information, see Billing overview.

Migration types

Schema migration
DTS migrates the schemas of objects from the source database to the destination database.
Full data migration
DTS migrates the historical data of objects from the source database to the destination database.
Incremental data migration
After full data migration is complete, DTS migrates incremental data from the source database to the destination database. Incremental data migration allows data to be migrated smoothly without interrupting the services of self-managed applications during data migration.

SQL operations that can be migrated during incremental data migration


Operation type	SQL statement
DML	INSERT, UPDATE, and DELETE
DDL	CREATE TABLE, ALTER TABLE, TRUNCATE TABLE, and DROP TABLE

Permissions required for database accounts


Database	Required permission	References
PolarDB for MySQL cluster	Read permissions on the objects to be migrated	Create a database account
AnalyticDB for PostgreSQL	Read and write permissions on the destination database to which source objects are migrated	Create a database account Note You can also enter an account that has the RDS_SUPERUSER permissions. For more information, see Manage users and permissions.

Procedure

Go to the Data Migration Tasks page.
1. Log on to the Data Management (DMS) console.
2. In the top navigation bar, click DTS.
3. In the left-side navigation pane, choose DTS (DTS) > Data Migration.
Note
- Operations may vary based on the mode and layout of the DMS console. For more information, see Simple mode and Configure the DMS console based on your business requirements.
- You can also go to the Data Migration Tasks page of the new DTS console.
From the drop-down list next to Data Migration Tasks, select the region in which the data migration instance resides.
Note If you use the new DTS console, you must select the region in which the data migration instance resides in the upper-left corner.

Click Create Task. On the page that appears, configure the source and destination databases.


Section	Parameter	Description
N/A	Task Name	The name of the task. DTS automatically generates a task name. We recommend that you specify an informative name to identify the task. You do not need to specify a unique task name.
Source Database	Select Instance	Select whether to use an existing instance. If you select an existing instance, DTS automatically applies the parameter settings of the instance. You do not need to configure the corresponding parameters again. If you do not use an existing instance, you must configure parameters for the source database.
	Database Type	The type of the source database. Select PolarDB for MySQL.
	Access Method	The access method of the source database. Select Alibaba Cloud Instance.
	Instance Region	The region in which the source PolarDB for MySQL cluster resides.
	Replicate Data Across Alibaba Cloud Accounts	Specifies whether to migrate data across Alibaba Cloud accounts. In this example, No is selected.
	PolarDB Cluster ID	The ID of the source PolarDB for MySQL cluster.
	Database Account	The database account of the source PolarDB for MySQL cluster. For more information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
	Database Password	The password of the database account.
Destination Database	Select Instance	Select whether to use an existing instance. If you select an existing instance, DTS automatically applies the parameter settings of the instance. You do not need to configure the corresponding parameters again. If you do not use an existing instance, you must configure parameters for the source database.
	Database Type	The type of the destination database. Select AnalyticDB for PostgreSQL.
	Access Method	The access method of the destination database. Select Alibaba Cloud Instance.
	Instance Region	The region in which the destination AnalyticDB for PostgreSQL instance resides.
	Instance ID	The ID of the destination AnalyticDB for PostgreSQL instance.
	Database Name	The name of the destination database in the AnalyticDB for PostgreSQL instance.
	Database Account	The database account of the destination AnalyticDB for PostgreSQL instance. For more information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
	Database Password	The password of the database account.

In the lower part of the page, click Test Connectivity and Proceed.
If the source or destination database is an Alibaba Cloud database instance, such as an ApsaraDB RDS for MySQL or ApsaraDB for MongoDB instance, DTS automatically adds the CIDR blocks of DTS servers to the whitelist of the instance. If the source or destination database is a self-managed database hosted on an Elastic Compute Service (ECS) instance, DTS automatically adds the CIDR blocks of DTS servers to the security group rules of the ECS instance, and you must make sure that the ECS instance can access the database. If the source or destination database is a self-managed database that is deployed in a data center or provided by a third-party cloud service provider, you must manually add the CIDR blocks of DTS servers to the whitelist of the database to allow DTS to access the database. For more information about the CIDR blocks of DTS servers, see Add the CIDR blocks of DTS servers to the security settings of on-premises databases.
Warning If the CIDR blocks of DTS servers are automatically or manually added to the whitelist of a database or an instance, or to the security group rules of an ECS instance, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhance the security of your username and password, limit the ports that are exposed, authenticate API calls, regularly check the whitelist or ECS security group rules and forbid unauthorized CIDR blocks, or connect the database to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.

Configure objects to migrate and advanced settings.


Parameter	Description
Migration Type	To perform only full data migration, select Schema Migration and Full Data Migration. To ensure service continuity during data migration, select Schema Migration, Full Data Migration, and Incremental Data Migration. Note If Incremental Data Migration is not selected, we recommend that you do not write data to the source instance during data migration. This ensures data consistency between the source and destination instances.
Processing Mode of Conflicting Tables	Precheck and Report Errors: checks whether the destination database contains tables that have the same names as tables in the source database. If the source and destination databases do not contain tables that have identical table names, the precheck is passed. Otherwise, an error is returned during the precheck and the data migration task cannot be started. Note You can use the object name mapping feature to rename the tables that are migrated to the destination database. If the source and destination databases contain identical table names and the tables in the destination database cannot be deleted or renamed, you can use this feature. For more information, see Map object names. Clear Destination Table: clears data from destination tables. Proceed with caution. Ignore Errors and Proceed: skips the precheck for identical table names in the source and destination databases. Warning If you select Ignore Errors and Proceed, data inconsistency may occur and your business may be exposed to potential risks. If the source and destination databases have the same schemas, and a data record has the same primary key value as an existing data record in the destination database: During full data migration, DTS does not migrate the data record to the destination database. The existing data record in the destination database is retained. During incremental data migration, DTS migrates the data record to the destination database. The existing data record in the destination database is overwritten. If the source and destination databases have different schemas, data may fail to be initialized. In this case, only some columns are migrated or the data migration task fails.
DDL and DML Operations to Be Synchronized	The SQL operations to be migrated during incremental data migration at the instance level. For more information, see the SQL operations that can be migrated during incremental data migration section of this topic. Note To select the SQL operations performed on a specific database or table, perform the following steps: In the Selected Objects section, right-click an object. In the dialog box that appears, select the SQL operations that you want to migrate.
Capitalization of Object Names in Destination Instance	The capitalization of database names, table names, and column names in the destination instance. By default, DTS default policy is selected. You can select other options to make sure that the capitalization of object names is consistent with the default capitalization of object names in the source or destination database. For more information, see Specify the capitalization of object names in the destination instance.
Source Objects	Select one or more objects from the Source Objects section. Click the icon and add the objects to the Selected Objects section. Note You can select columns, tables, or schemas as the objects to be migrated. If you select tables or columns as the objects to be migrated, DTS does not migrate other objects, such as views, triggers, or stored procedures, to the destination database.
Selected Objects	To rename an object that you want to migrate to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object. To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time. Note If you use the object name mapping feature to rename an object, other objects that are dependent on the object may fail to be migrated. To specify WHERE conditions to filter data, right-click an object in the Selected Objects section. In the dialog box that appears, specify the conditions. For more information, see Use SQL conditions to filter data. To select the SQL operations performed on a specific database or table, right-click an object in the Selected Objects section. In the dialog box that appears, select the SQL operations that you want to migrate. For more information about the SQL operations that can be migrated, see the SQL operations that can be migrated during incremental data migration section of this topic.

Click Next: Advanced Settings to configure advanced settings.


Parameter	Description
Copy the temporary table of the Online DDL tool that is generated in the source table to the destination database	If you use Data Management (DMS) or the gh-ost tool to perform online DDL operations on the source database, you can specify whether to migrate the temporary tables generated by online DDL operations. Valid values: Important You cannot use tools such as pt-online-schema-change to perform online DDL operations on the source database. Otherwise, the DTS task fails. Yes: DTS migrates the data of temporary tables generated by online DDL operations. Note If online DDL operations generate a large amount of data, the data migration task may take an extended period of time to complete. No, Adapt to DMS Online DDL: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL operations that are performed by using DMS are migrated. Note If you select this option, the tables in the destination database may be locked. No, Adapt to gh-ost: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL operations that are performed by using the gh-ost tool are migrated. You can use the default or custom regular expressions to filter out the shadow tables of the gh-ost tool and tables that are not required. Note If you select this option, the tables in the destination database may be locked.
Set Alerts	Specifies whether to set alerts for the data migration task. If the task fails or the migration latency exceeds the threshold, the alert contacts will receive notifications. Valid values: No: does not set alerts. Yes: sets alerts. If you select Yes, you must also set the alert threshold and alert contacts. For more information, see Configure monitoring and alerting when you create a DTS task.
Retry Time for Failed Connections	The retry time range for failed connections. If the source or destination database fails to be connected after the data migration task is started, DTS immediately retries a connection within the time range. Valid values: 10 to 1440. Unit: minutes. Default value: 720. We recommend that you set the parameter to a value greater than 30. If DTS reconnects to the source and destination databases within the specified time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Note If you set different retry time ranges for multiple data migration tasks that have the same source or destination database, the shortest retry time range that is set takes precedence. When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time range based on your business requirements. You can also release the DTS instance at your earliest opportunity after the source and destination instances are released.
Configure ETL	Specifies whether to configure the extract, transform, and load (ETL) feature. For more information, see What is ETL?. Valid values: Yes: configures the ETL feature. You can enter data processing statements in the code editor. For more information, see Configure ETL in a data migration or data synchronization task. No: does not configure the ETL feature.
Whether to delete SQL operations on heartbeat tables of forward and reverse tasks	Specifies whether to write SQL operations on heartbeat tables to the source database while the DTS instance is running. Yes: does not write SQL operations on heartbeat tables. In this case, a latency of the DTS instance may be displayed. No: writes SQL operations on heartbeat tables. In this case, specific features such as physical backup and cloning of the source database may be affected.

In the lower part of the page, click Next: Configure Database and Table Fields. On the page that appears, set the primary key columns and distribution key columns of the tables that you want to migrate to the destination AnalyticDB for PostgreSQL instance.
Note The page appears only if Schema Migration is selected for the Migration Type parameter. For more information about primary key columns and distribution key columns, see Manage tables and Define table distribution.
In the lower part of the page, click Next: Save Task Settings and Precheck.
Note
- Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.
- If the task fails to pass the precheck, click View Details next to each failed item. After you troubleshoot the issues based on the causes, run a precheck again.
- If an alert is triggered for an item during the precheck:
  If an alert item cannot be ignored, click View Details next to the failed item and troubleshoot the issues. Then, run a precheck again.
  If an alert item can be ignored, click Confirm Alert Details. In the View Details dialog box, click Ignore. In the message that appears, click OK. Then, click Precheck Again to run a precheck again. If you ignore the alert item, data inconsistency may occur, and your business may be exposed to potential risks.
Wait until the Success Rate value becomes 100%. Then, click Next: Purchase Instance.

On the Purchase Instance page, specify the Instance Class parameter for the data migration instance. The following table describes the parameter.


Section	Parameter	Description
Parameters	Instance Class	DTS provides several instance classes that vary in the migration speed. You can select an instance class based on your business scenario. For more information, see Specifications of data migration instances.

Read and select the check box to agree to Data Transmission Service (Pay-as-you-go) Service Terms.
Click Buy and Start to start the data migration task. You can view the progress of the task in the task list.