All Products
Search
Document Center

ApsaraDB for MongoDB:Migrate data from an ApsaraDB for MongoDB standalone instance to another ApsaraDB for MongoDB instance

Last Updated:Oct 23, 2024

You can use Data Transmission Service (DTS) to migrate data from an ApsaraDB for MongoDB standalone instance to another MongoDB database of any available architecture.

Supported source and destination databases

Note

The access methods of the source and destination databases must be the same. For example, both the source and destination databases are ApsaraDB for MongoDB instances.

Source database (standalone architecture)

Destination database (any available architecture)

ApsaraDB for MongoDB

ApsaraDB for MongoDB

Self-managed database that is hosted on an Elastic Compute Service (ECS) instance

Self-managed database that is hosted on an ECS instance

Self-managed database that is connected over Express Connect, VPN Gateway, or Smart Access Gateway

Self-managed database that is connected over Express Connect, VPN Gateway, or Smart Access Gateway

Self-managed database with a public IP address

Self-managed database with a public IP address

This topic describes how to migrate data from an ApsaraDB for MongoDB standalone instance to another ApsaraDB for MongoDB instance that is deployed in any available architecture. You can also follow the procedure to configure data migration tasks for other types of MongoDB databases.

Prerequisites

  • The source ApsaraDB for MongoDB instance of the standalone architecture and the destination ApsaraDB for MongoDB instance are created. The destination ApsaraDB for MongoDB instance can be deployed in any available architecture. For more information, see Create a standalone instance, Create a replica set instance, and Create a sharded cluster instance.

    Note

    For more information about the supported database versions, see Overview of data migration scenarios.

  • The available storage space of the destination ApsaraDB for MongoDB instance is 10% larger than the total size of the data in the source ApsaraDB for MongoDB instance. This is a recommended prerequisite.

  • If the destination ApsaraDB for MongoDB instance is deployed in a sharded cluster architecture, you need to create databases and collections to be sharded in the destination ApsaraDB for MongoDB instance and configure sharding based on your business requirements. For more information, see Configure sharding to maximize the performance of shards.

    Note

    After you configure sharding for a cluster, the migrated data will be distributed among different shards. This maximizes the performance of the sharded cluster.

Usage notes

Category

Description

Limits on the source database

  • Bandwidth requirements: The server on which the source database is deployed must have sufficient outbound bandwidth. Otherwise, the data migration speed decreases.

  • The collections to be migrated must have PRIMARY KEY or UNIQUE constraints and all fields must be unique. Otherwise, the destination database may contain duplicate data records.

  • If you select collections as the objects to be migrated and you need to edit collections in the destination database, such as renaming collections, up to 1,000 collections can be migrated in a single data migration task. If you run a task to migrate more than 1,000 collections, a request error occurs. In this case, we recommend that you configure multiple tasks to migrate the collections in batches or configure a task to migrate the entire database.

  • Limits on operations to be performed on the source database:

    • During schema migration and full data migration, do not perform schema change on databases or collections. Otherwise, the data migration task fails.

    • Incremental data migration is not supported in this scenario. To ensure data consistency, we recommend that you do not write data to the source MongoDB database during full data migration.

  • You cannot migrate collections that contain time to live (TTL) indexes. If the database to be migrated contains TTL indexes, data inconsistency may occur between the source and destination databases due to inconsistent time zones and clocks of the source and destination databases.

Other limits

  • If the destination database is a sharded cluster database, take note of the following limits:

    • Orphaned documents must be deleted. Otherwise, the migration performance is compromised. During data migration, if a _id conflict exists in the documents of the source and destination databases, data inconsistency may occur, or the data migration task may fail.

    • Before you start the data migration task, you must add shard keys to the data to be migrated in the source database. If you cannot add shard keys to the data in the source database, you can migrate data from a MongoDB database without shard keys. For more information, see Migrate data from a MongoDB instance without a sharding key to a MongoDB sharded cluster instance.

    • During the data migration, if you execute the INSERT statement to insert data into the data to be migrated, the data to be migrated must contain shard keys. If you execute the UPDATE statement to modify the data to be migrated, you cannot modify shard keys.

  • Only schema migration and full data migration are supported in this scenario. You cannot use DTS to migrate incremental data from a standalone MongoDB database because the oplog feature is disabled for the database.

  • If a collection of the destination database has a unique index or the capped attribute of a collection of the destination database is true, the collection supports only single-thread data writing and does not support concurrent replay during incremental data migration. This may increase migration latency.

  • DTS cannot migrate data from the admin or local database.

  • Transaction information is not retained. When transactions are migrated to the destination database, the transactions are converted into a single record.

  • To ensure compatibility, the version of the destination MongoDB database must be the same as or later than the version of the source MongoDB database. If the version of the destination database is earlier than the version of the source database, database compatibility issues may occur.

  • Before you migrate data, evaluate the impact of data migration on the performance of the source and destination databases. We recommend that you migrate data during off-peak hours. During full data migration, DTS uses the read and write resources of the source and destination databases. This may increase the loads on the database servers.

  • During full data migration, concurrent INSERT operations cause fragmentation in the collections of the destination database. After full data migration is complete, the storage space for collections of the destination database is larger than that of the source database.

  • Make sure that the precision settings for columns of the FLOAT or DOUBLE data type meet your business requirements. DTS uses the ROUND(COLUMN,PRECISION) function to retrieve values from columns of the FLOAT or DOUBLE data type. If you do not specify a precision, DTS sets the precision for columns of the FLOAT data type to 38 digits and the precision for columns of the DOUBLE data type to 308 digits.

  • DTS attempts to resume data migration tasks that failed within the last seven days. Before you switch workloads to the destination database, you must stop or release the failed tasks. You can also execute the REVOKE statement to revoke the write permissions from the accounts that are used by DTS to access the destination database. Otherwise, the data in the source database overwrites the data in the destination database after a failed task is resumed.

  • The data is concurrently written to the destination database. Therefore, the storage space occupied in the destination database is 5% to 10% larger than the size of the data in the source database.

  • You must use the db.$table_name.aggregate([{ $count:"myCount"}]) syntax to query the return value of a count operation on the destination MongoDB database.

  • Make sure that the destination MongoDB database does not have the same primary key as the source database. The default primary key is _id. Otherwise, data may be lost. If the data in the destination database has the same primary key as that in the source database, clear the related data in the destination database without interrupting the services of DTS. For example, if the same primary key is _id, you can delete the data in the destination database that has the same _id as the source database.

Special cases

If the source database is a self-managed MongoDB database, we recommend that you do not perform a primary/secondary switchover on the source database when the data migration task is running. Otherwise, the task fails.

Billing

Migration type

Instance configuration fee

Internet traffic fee

Schema migration and full data migration

Free of charge.

Charged only when data is migrated from Alibaba Cloud over the Internet. For more information, see Billing overview.

Migration types

Migration type

Description

Schema migration

DTS migrates the schemas of objects from the source ApsaraDB for MongoDB instance to the destination ApsaraDB for MongoDB instance.

Note

DTS supports schema migration for databases, collections, and indexes.

Full data migration

DTS migrates full data of objects from the source ApsaraDB for MongoDB instance to the destination ApsaraDB for MongoDB instance.

Note

DTS supports full data migration for databases and collections.

Permissions required for database accounts

Database

Schema migration

Full data migration

Source ApsaraDB for MongoDB instance

Read permissions on the source database and the config database.

Destination ApsaraDB for MongoDB instance

dbAdminAnyDatabase permission, read and write permissions on the destination database, and read permissions on the local database

For more information about how to create a database account and grant permissions to the database account for an ApsaraDB for MongoDB instance, see Manage user permissions on MongoDB databases.

Procedure

  1. Go to the Data Migration Tasks page.

    1. Log on to the Data Management (DMS) console.

    2. In the top navigation bar, move the pointer over DTS.

    3. Choose DTS (DTS) > Data Migration.

    Note
  2. From the drop-down list on the right side of Data Migration Tasks, select the region in which your data migration instance resides.

    Note

    If you use the new DTS console, you must select the region in which the data migration instance resides in the upper-left corner.

  3. Click Create Task. On the Create Data Migration Task page, configure the source and destination databases. The following table describes the parameters.

    Warning

    After you configure the source and destination databases, we recommend that you read the Limits that are displayed in the upper part of the page. Otherwise, the task may fail or data inconsistency may occur.

    Section

    Parameter

    Description

    N/A

    Task Name

    The name of the task. DTS automatically generates a task name. We recommend that you specify an informative name to identify the task. You do not need to specify a unique task name.

    Source Database

    Select an existing DMS database instance

    The database instance that you want to use. You can choose whether to use an existing instance based on your business requirements.

    • If you select an existing instance, DTS automatically populates the parameters for the database.

    • If you do not select an existing instance, you must configure the following database information.

    Database Type

    The type of the source database. Select MongoDB.

    Access Method

    The access method of the source database. Select Alibaba Cloud Instance.

    Instance Region

    The region in which the source ApsaraDB for MongoDB instance resides.

    Architecture

    The architecture in which the source instance is deployed. Select Replica Set for an ApsaraDB for MongoDB standalone instance.

    • Replica Set: You can deploy multiple types of nodes on a replica set instance to achieve high availability and read/write splitting. For more information, see Replica set instances.

    • Sharded Cluster: A sharded cluster instance consists of three types of components: mongos, shard, and Configserver nodes. You can customize the configurations and number of mongos and shard nodes. For more information, see Sharded cluster instances.

    Instance ID

    The ID of the source ApsaraDB for MongoDB instance.

    Authentication Database

    The name of the authentication database to which the objects to be migrated in the source ApsaraDB for MongoDB instance belong. If you did not change the name before, the default value is admin.

    Database Account

    The database account of the source ApsaraDB for MongoDB instance. For information about the permissions that are required for the account, see Permissions required for database accounts.

    Database Password

    The password that is used to access the database instance.

    Destination Database

    Select an existing DMS database instance

    The database instance that you want to use. You can choose whether to use an existing instance based on your business requirements.

    • If you select an existing instance, DTS automatically populates the parameters for the database.

    • If you do not select an existing instance, you must configure the following database information.

    Database Type

    The type of the destination database. Select MongoDB.

    Access Method

    The access method of the destination database. Select Alibaba Cloud Instance.

    Instance Region

    The region in which the destination ApsaraDB for MongoDB instance resides.

    Architecture

    The architecture in which the destination instance is deployed. Select an architecture based on your business requirements. Valid values:

    • Replica Set: You can deploy multiple types of nodes on a replica set instance to achieve high availability and read/write splitting. For more information, see Replica set instances.

    • Sharded Cluster: A sharded cluster instance consists of three types of components: mongos, shard, and config server nodes. You can customize the configurations and number of mongos and shard nodes. For more information, see Sharded cluster instances.

    Instance ID

    The ID of the destination ApsaraDB for MongoDB instance.

    Authentication Database

    The name of the authentication database to which the objects to be migrated in the destination ApsaraDB for MongoDB instance belong. If you did not change the name before, the default value is admin.

    Database Account

    The database account of the destination ApsaraDB for MongoDB instance. For information about the permissions that are required for the account, see Permissions required for database accounts.

    Database Password

    The password that is used to access the database instance.

  4. In the lower part of the page, click Test Connectivity and Proceed.

    If the source or destination database is an Alibaba Cloud database instance, such as an ApsaraDB RDS for MySQL or ApsaraDB for MongoDB instance, DTS automatically adds the CIDR blocks of DTS servers to the IP address whitelist of the instance. If the source or destination database is a self-managed database hosted on an Elastic Compute Service (ECS) instance, DTS automatically adds the CIDR blocks of DTS servers to the security group rules of the ECS instance, and you must make sure that the ECS instance can access the database. If the self-managed database is hosted on multiple ECS instances, you must manually add the CIDR blocks of DTS servers to the security group rules of each ECS instance. If the source or destination database is a self-managed database that is deployed in a data center or provided by a third-party cloud service provider, you must manually add the CIDR blocks of DTS servers to the IP address whitelist of the database to allow DTS to access the database. For more information, see the CIDR blocks of DTS servers section of the Add the CIDR blocks of DTS servers topic.

    Warning

    If the public CIDR blocks of DTS servers are automatically or manually added to the whitelist of a database instance or to the security group rules of an ECS instance, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhancing the security of your username and password, limiting the ports that are exposed, authenticating API calls, regularly checking the whitelist or security group rules and forbidding unauthorized CIDR blocks, or connecting the database instance to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.

  5. Configure the objects to be migrated and advanced settings.

    Parameter

    Description

    Migration Types

    Select Schema Migration and Full Data Migration.

    Note

    In this scenario, DTS does not support incremental data migration. To ensure data consistency, we recommend that you do not write data to the source database during data migration.

    For more information, see Migration types.

    Processing Mode of Conflicting Tables

    • Precheck and Report Errors: checks whether the destination database contains collections that have the same names as collections in the source database. If the source and destination databases do not contain identical collection names, the precheck is passed. Otherwise, an error is returned during the precheck, and the data migration task cannot be started.
      Note You can use the object name mapping feature to rename the collections that are migrated to the destination database. You can use this feature if the source and destination databases contain identical collection names and the collections in the destination database cannot be deleted or renamed. For more information, see Map object names.
    • Ignore Errors and Proceed: skips the precheck for identical collection names in the source and destination databases.
      Warning If you select Ignore Errors and Proceed, data inconsistency may occur, and your business may be exposed to potential risks.
      • DTS does not migrate data records that have the same primary keys as data records in the destination database.
      • Data may fail to be initialized, only some columns are migrated, or the data migration task fails.

    Capitalization of Object Names in Destination Instance

    Specify the capitalization of database names and collection names in the destination instance. By default, DTS default policy is selected. You can select other options to make sure that the capitalization of object names is consistent with that of the source or destination database. For more information, see Specify the capitalization of object names in the destination instance.

    Source Objects

    Select one or more objects from the Available section. Click the Rightwards arrow icon and add the objects to the Selected section.

    Note

    You can select databases or collections as the objects to be migrated.

    Selected Objects

    • To rename an object that you want to migrate to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object.
    • To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time.
    Note
    • If you use the object name mapping feature to rename an object, other objects that are dependent on the object may fail to be migrated.

    • To specify WHERE conditions to filter data, right-click an object in the Selected Objects section. In the dialog box that appears, specify the conditions. For more information, see Specify filter conditions.

  6. Click Next: Advanced Settings to configure advanced settings.

    Parameter

    Description

    Monitoring and Alerting

    Specifies whether to configure alerting for the data migration task. If the task fails or the migration latency exceeds the specified threshold, the alert contacts receive notifications. Valid values:

    Retry Time for Failed Connections

    The retry time range for failed connections. If the source or destination database fails to be connected after the data migration task is started, DTS immediately retries a connection within the retry time range. Valid values: 10 to 1440. Unit: minutes. Default value: 720. We recommend that you set the parameter to a value greater than 30. If DTS is reconnected to the source and destination databases within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails.

    Note
    • If you specify different retry time ranges for multiple data migration tasks that share the same source or destination database, the value that is specified later takes precedence.

    • When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time range based on your business requirements. You can also release the DTS instance at the earliest opportunity after the source database and destination instance are released.

    Configure ETL

    Select Yes or No based on your business requirements. If you select Yes, you must enter domain-specific language (DSL) statements in the code editor. For more information, see Configure ETL in a data migration or synchronization task.

  7. In the lower part of the page, click Next: Save Task Settings and Precheck.

    You can move the pointer over Next: Save Task Settings and Precheck and click Preview OpenAPI parameters to view the parameters to be specified when you call the relevant API operation to configure the DTS task.

    Note
    • Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.

    • If the task fails to pass the precheck, click View Details next to each failed item. After you analyze the causes based on the check results, troubleshoot the issues. Then, run a precheck again.

    • If an alert is triggered for an item during the precheck:

      • If an alert item cannot be ignored, click View Details next to the failed item and troubleshoot the issues. Then, run a precheck again.

      • If the alert item can be ignored, click Confirm Alert Details. In the View Details dialog box, click Ignore. In the message that appears, click OK. Then, click Precheck Again to run a precheck again. If you ignore the alert item, data inconsistency may occur, and your business may be exposed to potential risks.

  8. Wait until Success Rate becomes 100%. Then, click Next: Purchase Instance.

  9. On the Purchase Instance page, configure the Instance Class parameter for the data migration instance. The following table describes the parameters.

    Section

    Parameter

    Description

    New Instance Class

    Resource Group

    The resource group to which the data migration instance belongs. Default value: default resource group. For more information, see What is Resource Management?

    Instance Class

    DTS provides instance classes that vary in the migration speed. You can select an instance class based on your business scenario. For more information, see Instance classes of data migration instances.

  10. Read and agree to Data Transmission Service (Pay-as-you-go) Service Terms by selecting the check box.

  11. Click Buy and Start. In the message that appears, click OK.

    You can view the progress of the task on the Data Migration page.