Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | The specified instance does not exist. | diagnosis |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | The specified billing cycle is invalid. | diagnosis |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | The specified billing type is unavailable. | diagnosis |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | The route table attributes cannot be modified because the table name format is invalid. | diagnosis |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | An internal service call failed. Try again later. | diagnosis |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | The specified Name is invalid. | diagnosis |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | The access device is not allowed to directly enable a physical port. | diagnosis |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | The specified access point does not exist or you do not have the permission to view it. | diagnosis |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | The account balance is insufficient to purchase a VPN. | diagnosis |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | The available balance of the account is insufficient. | diagnosis |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | The account balance is insufficient. | diagnosis |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | The AliUid is not allowed to directly enable a physical port. | diagnosis |
| AllocateIpFailed | Alloc bandwidthPackage ips failed | An error occurred while allocating a public IP address for the EIP bandwidth plan. | diagnosis | |
| 400 | AnotherJobTesting | There is another job which is testing. | Only one fault drill task can be performed at a time for the same user in the same region. | diagnosis |
| ARREARAGE | The specified account has overdue payments. | diagnosis | ||
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | The IpVersion of the EIP instance does not match that of the Internet Shared Bandwidth instance. | diagnosis |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | The DHCP options set instance ID does not match the VPC. Check whether the association between the DHCP options set and the VPC is correct. | diagnosis |
| AUTH.RAM_AUTH_FAILED | An error occurred while verifying the RAM account identity. | diagnosis | ||
| 400 | AvailableZoneNotExist | Available zone not exist. | The zone does not exist. | diagnosis |
| BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | The specified bandwidth plan is locked due to overdue payments. | diagnosis | |
| BandwidthPackage.QuotaExceeded | The number of EIP bandwidth plans exceeds the upper limit. | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | An EIP in hybrid cloud mode cannot be added to a low-bandwidth bandwidth package. | diagnosis |
| BandwidthPackageId.InvalidBizStatus | The EIP bandwidth plan is locked due to overdue payments. | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | The specified bandwidth package is financially locked. IP addresses cannot be added. | diagnosis |
| BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | The operation on the EIP bandwidth plan conflicts with another operation. | diagnosis | |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | The specified bindable instance already has bandwidth. | diagnosis |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | The ECS instance already has port forwarding rules (DNAT). Delete the corresponding port forwarding rules before performing this operation. | diagnosis |
| BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | You are unauthorized to manage the specified EIP. | diagnosis | |
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | The tag and resource group cannot both be empty. | diagnosis |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | The GatewayRouteTableId and Ipv4GatewayRouteTableId parameters cannot both be empty. We recommend that you use GatewayRouteTableId. | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | The Ipv6InstanceId and Ipv6InternetBandwidthId parameters cannot both be empty. | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | The Ipv6AddressId and Ipv6InternetBandwidthId parameters cannot both be empty. | diagnosis |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | The account does not have a payment method configured or the reserved amount is insufficient. | diagnosis |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | The network mask length of the client IP pool must be greater than or equal to 16 and less than or equal to 29. | diagnosis |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | The specified client CIDR block is unavailable. | diagnosis |
| COMMODITY.INVALID_COMPONENT | The specified instance component is invalid. Check the specified instance component. | diagnosis | ||
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | The sales module parameters do not meet the constraint check requirements. | diagnosis |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | The specified VSwitchCidrReservationMask conflicts with VSwitchCidrReservationCidr. Modify the parameters based on the metric description in the API documentation and retry. | diagnosis |
| CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | The number of HAVIPs in the VPC has reached the upper limit. | diagnosis | |
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | The HaVip quota for the instance has been exceeded. | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | The number of route entries pointing to this HaVip instance has reached the upper limit. | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | The number of routes pointing to HaVip in the same route table exceeds the limit. | diagnosis |
| CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | The number of GA instances associated with a backend server instance reaches the upper limit. | diagnosis | |
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | The HaVip instance quota has been exceeded. | diagnosis |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | The number of destination routes to be created exceeds the quota limit. | diagnosis |
| CreateOrderFailed | The system failed to create the order. | diagnosis | ||
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | The number of policy-based routes exceeds the quota limit. | diagnosis |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | The number of SSL certificates to be created exceeds the quota limit. | diagnosis |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | The number of VPN connections exceeds the quota limit. | diagnosis |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | The number of VPN customer gateways to be created exceeds the quota. | diagnosis |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current CBN status does not support creating a vSwitch. | diagnosis |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | The credit limit is insufficient. Contact your channel partner to increase the credit limit. | diagnosis |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | The current VPN connection instance has been authorized to another account through CEN cross-account authorization. Remove the cross-account authorization before deleting it. | diagnosis |
| CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | The cross-BID connection is invalid. | diagnosis | |
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | Creating a VBR for users from other sites is not allowed. | diagnosis |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | A conflict exists between the current customer gateway and the route. | diagnosis |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | The customer gateway associated with the IPsec-VPN connection and the VPN gateway must not have the same gateway IP address. | diagnosis |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current CBN status does not support the operation to delete a vSwitch. | diagnosis |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | Resource deletion protection is enabled. | diagnosis |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | Resource deletion protection does not exist. | diagnosis |
| 400 | DeletionProtection.OwnerError | The resource owner error. | You are not the owner of this resource and cannot perform this operation. | diagnosis |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | Subscription resources are not supported. | diagnosis |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | The resource does not exist. | diagnosis |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | This resource type is not supported. | diagnosis |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | The vSwitch cannot be deleted because it still contains unreleased resources. | diagnosis |
| DependencyViolation | Some route entry status blocked this operation. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | diagnosis | |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource [%s] being operated on depends on [%s]. Delete the dependent resource before performing this operation. | diagnosis |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | The VPC cannot be deleted because it has a reverse access authorization relationship. | diagnosis |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource being operated on has dependencies. Dissociate the associated resources first. | diagnosis |
| DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | NAT service plans are associated with the NAT gateway. Disassociate the NAT service plans from the NAT gateway and try again. | diagnosis | |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | The VBR cannot be deleted because it depends on a BGP group. | diagnosis |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | The VBR cannot be deleted because it has BGP advertised CIDR block configurations. | diagnosis |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | A dependent BGP peer exists. | diagnosis |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | The vSwitch cannot be deleted because it is being used by a cloud service. Confirm the cloud service scenarios. | diagnosis |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | The VPC cannot be deleted because it contains EPS resources. | diagnosis |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | A dependency conflict exists because custom route tables are present. | diagnosis |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | The VPC cannot be deleted because it still has DHCP options set instances that have not been deleted. | diagnosis |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | diagnosis |
| DependencyViolation.EIPS | The specified NAT gateway is already associated with an EIP. | diagnosis | ||
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | The specified NAT gateway is already associated with an elastic IP address. Disassociate the elastic IP address from the NAT gateway first. | diagnosis |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | The vSwitch cannot be deleted because a NAT gateway exists. | diagnosis |
| DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | One or more specified public IP addresses are used by port forwarding rules. Delete the rules before you call this operation. | diagnosis | |
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | The Internet Shared Bandwidth instance has SNAT or DNAT entries that are not deleted. Delete the SNAT or DNAT entries before you perform this operation. | diagnosis |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | A fullnat configuration entry depends on this NAT IP address. The operation cannot be completed. | diagnosis |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | The VPC cannot be deleted because it contains endpoints. Delete the endpoints in the VPC before you delete a VPC. | diagnosis |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | diagnosis |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | The specified VPN gateway has GRE tunnels that are not deleted. | diagnosis |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | Cannot delete a vSwitch because it has associated high-availability virtual IP addresses (HaVips). | diagnosis |
| DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | The HAVIP is associated with an EIP and cannot be deleted. | diagnosis | |
| DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | The HAVIP serves as the next hop of a route entry and cannot be deleted. You must delete the route entry before you can delete the HAVIP. | diagnosis | |
| DependencyViolation.Instance | Specified object has dependent resources | The VPC is associated with a resource. | diagnosis | |
| 404 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | The VPC cannot be deleted because it still contains cloud service instances that are not deleted. | diagnosis |
| DependencyViolation.ip | The specified NAT gateway is already associated with an EIP. | diagnosis | ||
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | The resource has an assigned IP prefix. Delete the IP prefix and try again. | diagnosis |
| DependencyViolation.Ips | The specified EIP bandwidth plan is already associated. | diagnosis | ||
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | The resource cannot be deleted because it has dependent IPsec server resources. | diagnosis |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | The VPC cannot be deleted because it contains an IPv4 gateway. | diagnosis |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | diagnosis |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource [%s] depends on a reserved IPv6 CIDR block. Delete the dependent resource before you perform this operation. | diagnosis |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | The VPC cannot be deleted because it contains an IPv6 gateway. | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is depended on by other resources. The current operation is not allowed. | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | The specified IPv6 instance has IPv6 bandwidth enabled. Release the IPv6 bandwidth before you enable IPv6. | diagnosis |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | The vSwitch cannot be deleted because it has joined a multicast domain. | diagnosis |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | The VPC cannot be deleted because it contains a NAT gateway. Delete the NAT gateway in the VPC before you delete a VPC. | diagnosis |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | The operation cannot be performed because a dependent NAT IP address exists. | diagnosis |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | The operation cannot be performed because the NAT gateway has a dependent NAT CIDR block. | diagnosis |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | The specified object has a subordinate network ACL resource. | diagnosis |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | The vSwitch cannot be deleted because a network ACL exists. | diagnosis |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | The VBR cannot be deleted because an NQA instance exists. | diagnosis |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | Failed to delete a VPC because the VPC has a peer RouterInterface that is not deleted. | diagnosis |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | The prefix list cannot be deleted because it is still referenced. | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | Dependent resources exist. | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | The %s resource depends on %s. The operation cannot be completed. | diagnosis |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | A dependent protective rate-limiting rule exists. | diagnosis |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | The VPC cannot be deleted because it still contains custom routes that are not deleted. | diagnosis |
| DependencyViolation.RouteInterface | Specified object has dependent route interface . | The specified vSwitch is connected to a router interface and cannot be deleted. | diagnosis | |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The operation cannot be performed because the NAT gateway has dependent routes. | diagnosis |
| DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | The object is already associated with a router interface. | diagnosis | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | The router interface cannot be deleted because it is referenced by a route as the next hop. Delete the route that points to the router interface before you delete it. | diagnosis |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | The VBR is already referenced. | diagnosis |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | The vSwitch is associated with a route table and cannot be deleted. | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | Failed to delete a VPC because it still contains security groups that have not been deleted. Delete the security groups in the VPC first, and then delete the VPC. | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | Failed to delete a VPC because it still contains security groups that have not been deleted. Delete the security groups in the VPC first, and then delete the VPC. | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | Failed to delete a VPC because it still contains security groups [%s] that have not been deleted. Delete the security groups in the VPC first, and then delete the VPC. | diagnosis |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | The address [%s] under IPv6 gateway [%s] has Internet bandwidth enabled, which belongs to shared user [%s]. Delete it and try again. | diagnosis |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | The prefix list cannot be deleted because it has sharing relationships. | diagnosis |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | The vSwitch cannot be deleted because it is being used by an SNAT rule. | diagnosis |
| DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | One or more specified public IP addresses are used by SNAT entries. Delete the SNAT entries before you call this operation. | diagnosis | |
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | The Internet Shared Bandwidth instance has SNAT or DNAT entries that are not deleted. Delete the SNAT or DNAT entries before you perform this operation. | diagnosis |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | The specified VPN gateway has SSL VPN servers that have not been deleted. | diagnosis |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | A traffic mirror session still depends on the current resource. | diagnosis |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | The specified resource is depended on by other resources. The current operation is not allowed. | diagnosis |
| DependencyViolation.Tunnel | Specified object has dependent tunnel. | The VPC is associated with a tunnel. | diagnosis | |
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | The DHCP options set is attached to a VPC and cannot be deleted. | diagnosis |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | The NAT gateway has dependent endpoint services. This operation cannot be performed. | diagnosis |
| DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | The customer gateway has a VPN connection. Delete the VPN connection before you delete the customer gateway. | diagnosis | |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | The specified customer gateway has VPN connections that have not been deleted. | diagnosis |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | Failed to delete a VPC because it still contains vSwitches that have not been deleted. Delete the vSwitches in the VPC first, and then try to delete the VPC again. | diagnosis |
| 404 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The vSwitch has VSwitchCidrReservation in use and cannot be deleted. | diagnosis |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | The number of mappings for the destination IP port exceeds the quota. | diagnosis |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The DryRun validation passed. | diagnosis |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | The specified ClientToken is duplicated. | diagnosis |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | The specified IP addresses contain duplicates. Modify the parameters as described in the metric description and retry. | diagnosis |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | The specified SecondaryCidrBlock is duplicated. | diagnosis |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | The specified TagKey parameter is duplicated. | diagnosis |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | A duplicate route entry already exists. | diagnosis |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | The parameter is duplicated. | diagnosis |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | A duplicate cidrBlock was specified. | diagnosis |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | Failed to add a CIDR block to the address pool because the CIDR block and address mask cannot be specified at the same time. | diagnosis |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | The DNAT public port %s is already in use. | diagnosis |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | The InternalPort parameter is duplicated or already in use. | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | The local IP address is duplicated. | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | The interconnection IP address is duplicated. Change it and try again. | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | The parameter is duplicated. | diagnosis |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | The local IP address parameter contains duplicates. Change the local IP address and try again. | diagnosis |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | The local IP address parameter contains duplicates. Change the local IP address and try again. | diagnosis |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | The local IP address is duplicated. | diagnosis |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | The interconnection IP address is duplicated. Change it and try again. | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | The BGP neighbor IP address is duplicated. | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | The peer IP address is duplicated. | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | The parameter values contain duplicates. | diagnosis |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | The peer IP address parameter contains duplicates. Change the peer IP address and try again. | diagnosis |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | The peer IP address is duplicated. | diagnosis |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | The specified priority parameter conflicts with an existing priority value. | diagnosis |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | The traffic mirror source instance ID parameter contains duplicate values. | diagnosis |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | The trafficPath parameter contains duplicate values. | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | A shared Express Connect circuit that is bindded with a QoS policy does not allow the creation of cross-account Virtual Border Routers. Contact your account manager. | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | A dedicated Express Connect circuit that is bound with a QoS policy does not allow the creation of shared Express Connect circuits. Contact your account manager. | diagnosis |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | The device on which the Express Connect circuit resides does not support the QoS feature. | diagnosis |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | The current fault simulation task is being processed. Try again later. | diagnosis |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | A fault simulation task can contain a maximum of 16 resources. | diagnosis |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | A fault simulation task is already in progress for the current user. Complete the task and try again. | diagnosis |
| 400 | EcFailToGetAp | Fail to get access point details. | The corresponding access point information cannot be found. | diagnosis |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | The Express Connect peering connection authorization does not exist. | diagnosis |
| 400 | EcNotEnoughResource | Insufficient access point resources. | The access point has insufficient resources. | diagnosis |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | High-reliability Express Connect circuits are temporarily unavailable for purchase in this region. | diagnosis |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | In a single-VBR multi-Pconn scenario, all Pconns must be bound with QoS policies. | diagnosis |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | A dedicated Express Connect circuit that contains cross-account Virtual Border Routers cannot be bound with a QoS policy. | diagnosis |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | A dedicated Express Connect circuit that contains shared Express Connect circuits cannot be bound with a QoS policy. | diagnosis |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | The current QoS configuration conflicts with other configurations. Try again later. | diagnosis |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | A single QoS rule cannot contain both IPv4 and IPv6 address configurations. Additionally, if the existing configuration network type is IPv4, it cannot be changed to IPv6, and vice versa. Check and modify your configuration. | diagnosis |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | The current QoS policy is associated with an Express Connect circuit and cannot be directly deleted. Dissociate the policy first and retry. | diagnosis |
| EipOperation.TooFrequently | Associating EIPs with the EIP bandwidth plan too frequently. Try again later. | diagnosis | ||
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | The EIP is being added to the bandwidth plan too frequently. Try again later. | diagnosis |
| EIP_BIND_NATGATEWAY | The EIP is associated with a NAT gateway. | diagnosis | ||
| EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | The instance is already assigned a public IP address. | diagnosis | |
| EIP_NOT_SUPPORT_SNAT_POOL | The specified EIP cannot be added to the SNAT pool. | diagnosis | ||
| EIP_UNDERSTOCK | There are not enough eip in stock | The EIP inventory is insufficient. | diagnosis | |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | The same tunnel CIDR block exists in different IPsec tunnel BGP configurations. The tunnel CIDR block is %s. | diagnosis |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | A route with the prefix %s in the VPC route table is included in the IPsec server client CIDR block. | diagnosis |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | A policy-based route with the same prefix already exists. The prefix is %s. | diagnosis |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | The current region does not support enabling high availability. | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | A route with the same prefix already exists. The prefix is %s. | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | A route with the same prefix already exists. The prefix is %s. | diagnosis |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | A route with the prefix %s in the VPC route table is included in the SSL VPN client CIDR block. | diagnosis |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | The current VPN gateway type does not support enabling high availability. | diagnosis |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | Enabling high availability only supports IPsec-VPN or SSL-VPN. | diagnosis |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | When an ENI is associated with a pass-through EIP, the ENI must be disassociated from the ECS instance. | diagnosis |
| EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | The number of associated VBRs has reached the upper limit. | diagnosis | |
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | The parameters %s and %s are mutually exclusive. | diagnosis |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | The specified instance does not exist. | diagnosis |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | The specified billing period is invalid. | diagnosis |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | The specified billing type is invalid. | diagnosis |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | The new name of the route table is invalid. | diagnosis |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | Failed to call the internal service. Try again later. | diagnosis |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | The specified Name is invalid. | diagnosis |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | The access device is not allowed to use a physical port. | diagnosis |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | The input access point does not exist or does not have permission to view it. | diagnosis |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | The user's account balance for purchasing the VPN is insufficient. | diagnosis |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | The account does not have sufficient balance. | diagnosis |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | User attempted to create a new order.but user account balance is insufficient. | diagnosis |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | You are not allowed to use a physical port when you use an Alibaba Cloud UID. | diagnosis |
| AllocateIpFailed | Alloc bandwidthPackage ips failed | An error occurred while allocating a public IP address for the EIP bandwidth plan. | diagnosis | |
| 400 | AnotherJobTesting | There is another job which is testing. | The same user can only perform one fault drill task in the same region at the same time. | diagnosis |
| ARREARAGE | The specified account has overdue payments. | diagnosis | ||
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | The IpVersion of the EIP instance does not match that of the Internet Shared Bandwidth instance. | diagnosis |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | The ID of the DHCP options set does not match the VPC. Check whether the specified DHCP options set is associated with the VPC. | diagnosis |
| AUTH.RAM_AUTH_FAILED | An error occurred while verifying the RAM account identity. | diagnosis | ||
| 400 | AvailableZoneNotExist | Available zone not exist. | The zone does not exist. | diagnosis |
| BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | The specified bandwidth plan is locked due to overdue payments. | diagnosis | |
| BandwidthPackage.QuotaExceeded | The number of EIP bandwidth plans exceeds the upper limit. | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | You cannot associate an EIP in hybrid cloud mode with an EIP bandwidth plan that provides low bandwidth. | diagnosis |
| BandwidthPackageId.InvalidBizStatus | The EIP bandwidth plan is locked due to overdue payments. | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | diagnosis |
| BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | The operation on the EIP bandwidth plan conflicts with another operation. | diagnosis | |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | The specified bound instance already has bandwidth. | diagnosis |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | The ECS instance already has a port forwarding rule (DNAT). Delete the corresponding port forwarding rule before performing the operation. | diagnosis |
| BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | You are unauthorized to manage the specified EIP. | diagnosis | |
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | The tags and resource groups cannot be empty at the same time. | diagnosis |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | You cannot leave both Ipv6InstanceId and Ipv6InternetBandwidthId empty. | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | Input Ipv6AddressId and Ipv6InternetBandwidthId cannot be empty at the same time | diagnosis |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | The error message returned because your account does not have a payment method configured or does not have sufficient balance. | diagnosis |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | The subnet mask of the client IP pool must range from 16 to 29. | diagnosis |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | The client CIDR block is unavailable. | diagnosis |
| COMMODITY.INVALID_COMPONENT | The specified instance component is invalid. Check the specified instance component. | diagnosis | ||
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | The instance component is invalid. | diagnosis |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | The VSwitchCidrReservationMask value conflicts with the VSwitchCidrReservationCidr value. Adjust the values and try again. | diagnosis |
| CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | The number of HAVIPs in the VPC has reached the upper limit. | diagnosis | |
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | The number of HAVIPs has reached the upper limit. | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | The number of route entries that point to the HAVIP has reached the upper limit. | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | The number of routes that point to the HAVIP in a route table exceeds the upper limit. | diagnosis |
| CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | The number of GA instances associated with a backend server instance reaches the upper limit. | diagnosis | |
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | The number of HAVIPs has reached the upper limit. | diagnosis |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | The number of created destination routes exceeds the quota limit. | diagnosis |
| CreateOrderFailed | The system failed to create the order. | diagnosis | ||
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | The number of policy routes exceeds the quota limit. | diagnosis |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | Create the number of SSL certificates that exceed the quota limit. | diagnosis |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | The number of VPN connections exceeds the quota limit. | diagnosis |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | The number of created VPN customer gateways exceeds the quota. | diagnosis |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | You cannot create a vSwitch when the CEN instance is in the current state. | diagnosis |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | The quota is insufficient. Contact your partner to increase the quota. | diagnosis |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | the current vpn connection instance is cross-account authorized to the cen of another account. you need to cancel the cross-account authorization before deleting the instance. | diagnosis |
| CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | The cross-BID connection is invalid. | diagnosis | |
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | You are not allowed to create a VBR for another Alibaba Cloud account. | diagnosis |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | The customer gateway conflicts with the current routes. | diagnosis |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | The IP address of the customer gateway conflicts with the IP address of the VPN gateway. | diagnosis |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | You cannot delete the vSwitch when the CEN instance is in the current state. | diagnosis |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | Deletion protection is enabled. | diagnosis |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | Deletion protection is disabled. | diagnosis |
| 400 | DeletionProtection.OwnerError | The resource owner error. | The operation is not allowed because the resource does not belong to you. | diagnosis |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | Subscription resources are not supported. | diagnosis |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | The resource does not exist. | diagnosis |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | This type of resource is not supported. | diagnosis |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | Failed to delete the vSwitch because resources attached to the vSwitch are not released. | diagnosis |
| DependencyViolation | Some route entry status blocked this operation. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | diagnosis | |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | diagnosis |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | The VPC has a reverse access and cannot be deleted. | diagnosis |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The resource of the operation has dependencies. Please disassociate them first. | diagnosis |
| DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | NAT service plans are associated with the NAT gateway. Disassociate the NAT service plans from the NAT gateway and try again. | diagnosis | |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | The VBR is associated with a BGP group and cannot be deleted. | diagnosis |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | You cannot delete the VBR because the VBR has advertised BGP CIDR blocks. | diagnosis |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | A dependent BGP peer exists. | diagnosis |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | The error message returned because the vSwitch is being used by a cloud service and cannot be deleted. Check the use scenario of the cloud service. | diagnosis |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | The VPC cannot be deleted because it contains EPS resources. | diagnosis |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | A dependency conflict exists because custom route tables are present. | diagnosis |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | diagnosis |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | diagnosis |
| DependencyViolation.EIPS | The specified NAT gateway is already associated with an EIP. | diagnosis | ||
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | An EIP is associated with the NAT gateway. Disassociate the EIP from the NAT gateway first. | diagnosis |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | You cannot delete the vSwitch because a NAT gateway exists in the vSwitch. | diagnosis |
| DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | One or more specified public IP addresses are used by port forwarding rules. Delete the rules before you call this operation. | diagnosis | |
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | The NAT service plan is associated with SNAT or DNAT entries. Delete them and try again. | diagnosis |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | The operation failed because the FULLNAT entry depends on the NAT IP. | diagnosis |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | The VPC contains endpoints and cannot be deleted. Delete the endpoints in the VPC and then delete the VPC. | diagnosis |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | diagnosis |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | The error message returned because GRE tunnels are not deleted on the VPN gateway. | diagnosis |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | The vSwitch is associated with an HAVIP and the vSwitch cannot be deleted. | diagnosis |
| DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | The HAVIP is associated with an EIP and cannot be deleted. | diagnosis | |
| DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | The HAVIP serves as the next hop of a route entry and cannot be deleted. You must delete the route entry before you can delete the HAVIP. | diagnosis | |
| DependencyViolation.Instance | Specified object has dependent resources | The VPC is associated with a resource. | diagnosis | |
| 404 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | Instances exist in the VPC and the VPC cannot be deleted. | diagnosis |
| DependencyViolation.ip | The specified NAT gateway is already associated with an EIP. | diagnosis | ||
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | The error message returned because a prefix list is assigned to the resource. Delete the prefix list and try again. | diagnosis |
| DependencyViolation.Ips | The specified EIP bandwidth plan is already associated. | diagnosis | ||
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | The specified VPN gateway has IPsec-VPN servers that have not been deleted. | diagnosis |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | The VPC cannot be deleted because an IPv4 gateway exists in the VPC. | diagnosis |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | diagnosis |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | diagnosis |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | The VPC cannot be deleted because it contains an IPv6 gateway. | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | The specified resource is dependent on other resources and the current operation is not allowed. | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | The IPv6 bandwidth of the specified IPv6 instance has been enabled. Release the IPv6 bandwidth after the operation. | diagnosis |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | The vSwitch is added to a multicast domain and cannot be deleted. | diagnosis |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | NAT gateways exist in the VPC and the VPC cannot be deleted. Delete the NAT gateways and try again. | diagnosis |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with a NAT IP address. | diagnosis |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with a NAT CIDR block. | diagnosis |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | The specified object is associated with a network ACL. | diagnosis |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | You cannot delete the vSwitch because a network ACL exists in the vSwitch. | diagnosis |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | You cannot delete the VBR because nqa exists. | diagnosis |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | The VPC failed to be deleted because a peer router interface exists in the VPC. | diagnosis |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | The prefix list cannot be deleted because it is still referenced. | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | Dependent resources exist. | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | The %s resource depends on %s. | diagnosis |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | The QoS feature cannot be disabled for the NAT gateway because QoS rules are associated with the NAT gateway. | diagnosis |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | The resource is still referenced by route entries. | diagnosis |
| DependencyViolation.RouteInterface | Specified object has dependent route interface . | The specified vSwitch is connected to a router interface and cannot be deleted. | diagnosis | |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with a route entry. | diagnosis |
| DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | The object is already associated with a router interface. | diagnosis | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | The router interface is referenced as a next hop by a route entry and cannot be deleted. Delete the route entry before you can delete the router interface. | diagnosis |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | The VBR is already used. | diagnosis |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | You cannot delete the vSwitch because a route table is associated with the vSwitch. | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | Security groups exist in the VPC and the VPC cannot be deleted. Delete the security groups and try again. | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | Security groups exist in the VPC and the VPC cannot be deleted. Delete the security groups and try again. | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | Security group [%s] exists in the VPC and the VPC cannot be deleted. Delete the security groups and try again. | diagnosis |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | diagnosis |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | The prefix list cannot be deleted because it has sharing relationships. | diagnosis |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | You cannot delete a vSwitch when SNAT is used. | diagnosis |
| DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | One or more specified public IP addresses are used by SNAT entries. Delete the SNAT entries before you call this operation. | diagnosis | |
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | The NatIp or Ipv4Prefix is associated with an SNAT entry. The delete operation cannot proceed. Delete the dependent SNAT entry first and then try again. | diagnosis |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | The error message returned because SSL-VPN connections to the specified customer gateway are not deleted. | diagnosis |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | The traffic mirror session depends on the current resource. | diagnosis |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | The specified resource is dependent on other resources and the current operation is not allowed. | diagnosis |
| DependencyViolation.Tunnel | Specified object has dependent tunnel. | The VPC is associated with a tunnel. | diagnosis | |
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | The DHCP options set is associated with a VPC and cannot be deleted. | diagnosis |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | You cannot perform the operation because the NAT gateway is associated with an endpoint service. | diagnosis |
| DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | The customer gateway has a VPN connection. Delete the VPN connection before you delete the customer gateway. | diagnosis | |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | The error message returned because VPN connections to the specified customer gateway are not deleted. | diagnosis |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | vSwitches exist in the VPC and the VPC cannot be deleted. Delete the vSwitches and try again. | diagnosis |
| 404 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The error message returned because a CIDR block is reserved for the vSwitch and the vSwitch cannot be deleted. | diagnosis |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | The number of mappings for the destination IP port exceeds the quota. | diagnosis |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The request passed the dry run. | diagnosis |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | The specified ClientToken is duplicated. | diagnosis |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | The IP address is duplicate. See the API reference and specify a valid IP address. | diagnosis |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | The specified SecondaryCidrBlock is duplicated. | diagnosis |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | The error message returned because the specified tag key already exists. | diagnosis |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | Duplicate next hops are specified. | diagnosis |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | The parameter is set to a duplicate value. | diagnosis |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | The error message returned because a duplicate CIDR block is specified. | diagnosis |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | The system failed to add the CIDR block to the address pool because you cannot specify the CIDR block and the subnet mask at the same time. | diagnosis |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | The DNAT public network port has been used repeatedly. | diagnosis |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | Duplicate or occupied InternalPort parameter | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | The local IP address already exists. | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | The error message returned because a duplicate IP address is used for communication. Change the IP address and try again. | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | The parameter is duplicated. | diagnosis |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | The error message returned because you specified a duplicate local IP address. Change the local IP address and try again. | diagnosis |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | The error message returned because you specified a duplicate local IP address. Change the local IP address and try again. | diagnosis |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | The local IP address already exists. | diagnosis |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | The peer IP address already exists. | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | Duplicate IP addresses of BGP peers exist. | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | The peer IP address already exists. | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | Duplicate parameter value | diagnosis |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | The error message returned because you specified a duplicate peer IP address. Change the peer IP address and try again. | diagnosis |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | The peer IP address already exists. | diagnosis |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | The specified priority is the same as an existing one. | diagnosis |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | Duplicate values are set for TrafficMirrorSourceIds.N. | diagnosis |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | The value of TrafficPath.N is duplicate. | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | Shared physical lines bound with QoS policies do not allow cross-account virtual border routers to be created. Contact the business manager. | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | Exclusive physical lines bound with QoS policies are not allowed to create shared physical lines. Please contact the business manager. | diagnosis |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | The device where the physical connection is located does not support the QoS feature. | diagnosis |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | The current failover test job task is in operation, please try again later. | diagnosis |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | The failover test job can add up to 16 resources. | diagnosis |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | The current user already has a failover test job in progress. Please complete it and try again. | diagnosis |
| 400 | EcFailToGetAp | Fail to get access point details. | Unable to query the corresponding access point information. | diagnosis |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | The Express Connect circuit is not authorized. | diagnosis |
| 400 | EcNotEnoughResource | Insufficient access point resources. | Insufficient Access Point Resources | diagnosis |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | Highly reliable physical lines are temporarily not supported for sale in the local region. | diagnosis |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | In a single VBR and multiple Pconn scenarios, all Pconn must be bound to a QoS policy. | diagnosis |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | Exclusive physical connections that contain cross-account virtual border routers cannot bind QoS policies. | diagnosis |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | Exclusive physical lines that contain shared physical lines cannot be bound to QoS policies. | diagnosis |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | The current QoS configuration conflicts with other configurations. Please try again later. | diagnosis |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | Both IPv4 address configuration and IPv6 address configuration are not allowed in a QoS rule. If the original configuration network type is IPv4 and cannot be modified to IPv6 (or vice versa), please check and modify it. | diagnosis |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | Your current QoS policy has been associated with a physical connection and cannot be deleted directly. Please disassociate it and try again. | diagnosis |
| EipOperation.TooFrequently | Associating EIPs with the EIP bandwidth plan too frequently. Try again later. | diagnosis | ||
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | diagnosis |
| EIP_BIND_NATGATEWAY | The EIP is associated with a NAT gateway. | diagnosis | ||
| EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | The instance is already assigned a public IP address. | diagnosis | |
| EIP_NOT_SUPPORT_SNAT_POOL | The specified EIP cannot be added to the SNAT pool. | diagnosis | ||
| EIP_UNDERSTOCK | There are not enough eip in stock | The EIP inventory is insufficient. | diagnosis | |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | The same tunnel CIDR block exists in different IPsec tunnels that use BGP. The tunnel CIDR block is %s. | diagnosis |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | The prefix %s in the VPC route table falls within the CIDR block of the IPsec client. | diagnosis |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | Policy-based routes with the same prefix exist. The prefix is %s. | diagnosis |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | The region does not support high availability. | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | A route with the same prefix already exists: %s | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | There are routes with the same prefix, the prefix is %s. | diagnosis |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | The prefix %s in the VPC route table falls within the CIDR block of the SSL client. | diagnosis |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | The VPN gateway type does not support high availability. | diagnosis |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | Only IPsec-VPN or SSL-VPN supports high availability. | diagnosis |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | If the ENI is associated with an EIP in cut-through mode, you must disassociate the ENI from the ECS instance. | diagnosis |
| EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | The number of associated VBRs has reached the upper limit. | diagnosis | |
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | You cannot specify %s and %s at the same time. | diagnosis |
| 400 | ExclusiveParam.AccessModeValueAndAccessTunnelType | The specified param AccessModeValue and AccessTunnelType are mutually exclusive. | The specified AccessMode.ModeValue and AccessMode.TunnelType parameters conflict with each other. | diagnosis |
| 400 | ExclusiveParam.EnableIpv6AndCidrBlock | The param of EnableIpv6 and CidrBlock are mutually exclusive. | The EnableIpv6 and CidrBlock parameters are mutually exclusive. | diagnosis |
| 400 | ExclusiveParam.NextHopTypeAndNextHopId | The param of nextHopType and nextHopId are mutually exclusive. | The next hop type does not match the next hop instance. | diagnosis |
| 400 | ExclusiveParam.PrivateLinkEnabledAndAccessMode | The specified paramPrivateLinkEnabled and AccessMode are mutually exclusive. | The specified PrivateLinkEnabled and AccessMode parameters conflict with each other. | diagnosis |
| 400 | ExclusiveParam.PrivateLinkModeAndAccessMode | The specified param PrivateLinkMode and AccessMode are mutually exclusive. | The specified PrivateLinkMode and AccessMode parameters conflict with each other. | diagnosis |
| 400 | ExclusiveParam.ZoneAndIpAddress | The specified param Zone and IpAddress or InstanceId are mutually exclusive. | The specified Zone parameter conflicts with the IpAddress or InstanceId parameter. | diagnosis |
| 400 | ExclusiveParam.ZoneAndPublicIpAddressPoolId | The Zone and PublicIpAddressPoolId parameters are mutually exclusive. | The Zone and PublicIpAddressPoolId parameters cannot be specified at the same time. | diagnosis |
| Forbbiden | The eip instance owener error | The EIP does not belong to your account. Check whether you are authorized to perform the operation on the EIP. | diagnosis | |
| Forbbiden | The Router instance owener error | The router does not belong to your account. | diagnosis | |
| Forbbiden | Active custom route in vpc. | You must add a custom route entry to the VPC. | diagnosis | |
| Forbbiden | Specified RouteEntry cannot allowed delete by openApi. | You cannot call this operation to delete the specified route. | diagnosis | |
| 400 | Forbbiden | The router does not belong to your account. | The vRouter does not belong to your account. | diagnosis |
| 403 | Forbbiden | User not authorized to operate on the specified resource. | The user does not have permission to operate on the specified resource. | diagnosis |
| 400 | Forbbiden.InvaildOwner | Incorrect RouterInterface owner. | The vRouter does not belong to your account. | diagnosis |
| 400 | Forbbiden.InvaildOwner | The RouterInterface owener error | The vRouter owner information is incorrect. | diagnosis |
| Forbbiden.ModifyIdAndType | Opposite is VBR | The peer is a VBR. | diagnosis | |
| Forbbiden.SubUser | The specified action is not available for you. | You are not authorized to perform the operation. | diagnosis | |
| Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You are unauthorized to perform this operation on the specified resource. Acquire the required permissions and try again. | diagnosis | |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource. | The user does not have permission to operate on this resource. | diagnosis |
| Forbedden.NotSupportRAM | This action does not support accessed by RAM mode. | You cannot call this operation as a RAM user. | diagnosis | |
| 403 | Forbidden | User not authorized to operate on the specified resource. | You do not have permission to operate on the specified resource. Apply for the required permission and try again. | diagnosis |
| 403 | Forbidden | You do not have the permissions to manage the specified resource. Apply for the permissions and try again. | You do not have permission to manage the current resource. Apply for the required permission and try again. | diagnosis |
| 400 | Forbidden | The eip instance owener error | The EIP does not belong to the current caller. Check whether you have permission to call this EIP. | diagnosis |
| 400 | Forbidden | The eip instance owner error | The EIP does not belong to the current caller. Check whether you have permission to call this EIP. | diagnosis |
| 400 | Forbidden.AcceptRoleNotSupportPrePay | Acception side ri not support chargetype for prepaid. | The subscription billing method is not supported. | diagnosis |
| 400 | Forbidden.AllocateEipSegmentAddress | Authentication is failed for allocating eip segment address. | Failed to apply for contiguous EIPs. This service has been discontinued. Use the IP address pool service instead. | diagnosis |
| Forbidden.Already.Bounded | The specified instance already bounded | The specified instance is associated. | diagnosis | |
| Forbidden.AssociateToVBR | The physical connection still associate to VBR. | The physical connection has configured a virtual border router. | diagnosis | |
| Forbidden.BillsOutstanding | You cannot create more RouterInterface because you have bills outstanding. | You cannot create router interfaces. You have overdue payments. | diagnosis | |
| Forbidden.BillsOutstanding | You cannot use this action because you have bills outstanding. | You have uncompleted payments and cannot call this operation. | diagnosis | |
| Forbidden.ChargeTypeIsPrepaid | It's forbidden to release a prepaid EIP | You cannot release subscription EIPs. | diagnosis | |
| Forbidden.ChargeTypeIsPrepaid | It’s forbidden to change prepaid EIP’s bandwidth by API. It can be changed on Aliyun web console. | You cannot call an API operation to modify the bandwidth of a subscription EIP. You can modify the bandwidth in the console. | diagnosis | |
| Forbidden.CheckEntryRuleQuota | Route entry quota rule check error. | An error occurred when the system was checking the quota of route entries. | diagnosis | |
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to modify. | You are not allowed to modify CircuitCode. | diagnosis | |
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to specify the CircuitCode parameter. | You are not allowed to specify CircuitCode. | diagnosis | |
| 400 | Forbidden.Convert | User does not have permission to operate. | The user does not have permission to perform this operation. | diagnosis |
| 400 | Forbidden.CreatePublicIpAddressPool | Authentication is failed for creating public ip address pool. | You cannot create a PublicIpAddressPool at this time. Check whether your account is authorized to perform this operation. | diagnosis |
| 400 | Forbidden.CrossBorder | User not authorized to create cross border routerInterface. | The user does not have permission to create a cross-border router interface. | diagnosis |
| Forbidden.DescriptionNotAllowedByCaller | The caller is not allowed to specify the Description parameter. | You are not allowed to set Description. | diagnosis | |
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The specified private IP address does not fall within the CIDR block of the VPC. Enter a private IP address that falls within the CIDR block of the VPC. | diagnosis | |
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Destination Ip is Out of VPC CIDR. | The specified private IP address does not fall within the CIDR block of the VPC. Enter a private IP address that falls within the CIDR block of the VPC. | diagnosis | |
| 400 | Forbidden.DisableRoutePropagation | The operation of disable route propagation is forbidden. | Disabling route propagation for this route table is not allowed. | diagnosis |
| Forbidden.DiskNotFound | The specified Disk is not found | The disk does not exist. | diagnosis | |
| 400 | Forbidden.EipInBwp | The EIP has been associated with an EIP bandwidth plan. | EIPs in the contiguous EIP group have been added to an Internet Shared Bandwidth instance. The contiguous EIP group cannot be deleted. | diagnosis |
| Forbidden.EnableClassicLink | ClassicLink can be enabled for a VPC whose CIDR block is 172.16.0.0/12, 192.168.0.0/16, or 10.0.0.0/8. For more information, see Features and limits of ClassicLink. | diagnosis | ||
| Forbidden.ExternalIp.UsedInSnatTable | The specified ExternalIp is already used in SnatTable | The specified EIP is already used by an SNAT entry. Select a different EIP or delete the SNAT entry. | diagnosis | |
| 400 | Forbidden.FinancialLocked | The instance is locked due to outstanding payments. | The instance is locked due to overdue payment and cannot be operated. | diagnosis |
| 400 | Forbidden.FinancialLocked | The ip business status is invalid. | The instance is locked due to overdue payment and cannot be operated. | diagnosis |
| 400 | Forbidden.FinancialLocked | The router interface has been locked due to overdue payments. | The router interface is locked due to overdue payment and cannot be operated. | diagnosis |
| 400 | Forbidden.FinancialLocked | The router interface is locked due to overdue payments. | The router interface is locked because of outstanding bills. | diagnosis |
| 400 | Forbidden.FinancialLocked | RouterInterface can not be operated by this action when it's FinancialLocked. | This operation cannot be performed when the router interface has an overdue payment. | diagnosis |
| Forbidden.FinancileLocked | This RouterInterface is financiel locked because of bills outstanding. | The router interface is locked due to overdue payments. | diagnosis | |
| Forbidden.GlobalAccelerationInstanceChargeTypeIsPrepaid | You cannot release a subscription GA instance. | diagnosis | ||
| 400 | Forbidden.HaVip | No permissions to perform operations on HAVIPs. Please apply for privilege--vpc_privilege_allow_buy_havip_instance. | You do not have the permission to operate the HaVip. Apply for the permission in Quota Center. | diagnosis |
| Forbidden.ImageNotFound | The specified Image is not found | This image does not exist. | diagnosis | |
| Forbidden.InstanceNotFound | The specified Instance is not found | The instance does not exist. Check the instance ID. | diagnosis | |
| Forbidden.InternalIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | The private IP address does not fall within the CIDR block of the VPC. | diagnosis | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The snat ip can not be used. Because it has been used in dnat | This IP address is already used by a DNAT rule and cannot be used for SNAT. | diagnosis |
| 400 | Forbidden.IpHasBeenUsedInDnat | The SNAT entries cannot use this EIP. Because it is already used in DNAT entries (arbitrary port mapping). | This EIP cannot be used for an SNAT entry because it is already used in a DNAT entry with port mapping set to Any Port. | diagnosis |
| 400 | Forbidden.IpHasBeenUsedInSnat | The source ip can not be used. Because it has been used in snat. | This source IP address cannot be used because it is already used for SNAT. | diagnosis |
| Forbidden.IpUsedInForwardTable | The specified SnatIp already used in forward table | The specified EIP is already used by a DNAT entry. Select another EIP or delete the DNAT rule that uses the specified EIP. | diagnosis | |
| Forbidden.LocalGatewayIpNotAllowedByCaller | The caller is not allowed to specify the LocalGatewayIp parameter. | You are not allowed to specify LocalGatewayIp. | diagnosis | |
| 403 | Forbidden.ModifyEipBondType | Authentication is failed for modify EIP bond type. | Modifying the EIP bindng type is not allowed. | diagnosis |
| 400 | Forbidden.MultiDirectEip | No permission to bind multi direct eip. | You do not have the permission to bindmultiple pass-through EIPs. | diagnosis |
| Forbidden.MultiVlanRi | Multiple vlan router interfaces are found. | Multiple VLAN router interfaces exist. | diagnosis | |
| Forbidden.NameNotAllowedByCaller | The caller is not allowed to specify the Name parameter. | You do not have the permissions to set the Name parameter. | diagnosis | |
| 400 | Forbidden.NatPayBySpec | Pay-by-specification NAT is no longer supported. Newly purchased pay-as-you-go NAT gateways only support the pay-by-CU metering method. | NAT gateways billed by specification are no longer available for purchase. Select a NAT gateway billed by CU. | diagnosis |
| 400 | Forbidden.NoPermission | User does not have permission to operate. | You do not have the operation permission. | diagnosis |
| Forbidden.NoRiFound | No vlan router interfaces are found. | No VLAN router interface is available. | diagnosis | |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | The system tag is invalid. | diagnosis |
| Forbidden.NotAllowedInState | The request does not allow in this state. | The operation cannot be performed when the Express Connect circuit in the current state. | diagnosis | |
| 400 | Forbidden.NotInAllowDeleteStatus | Only physical connection in the Cancelled, Rejected, Terminated, Allocated, or AllocationFailed states can be deleted. | Only Express Connect circuits in the Canceled, Rejected, Terminated, Allocated, or Allocation Failed state can be deleted. | diagnosis |
| Forbidden.NotInRouterInterfaceCreateWhitelist | Not in router interface create whitelist. | You are not included in the whitelist to create router interfaces. | diagnosis | |
| 400 | Forbidden.NotSameAccessDevice | Vbr and physicalConnection are not on the same accessDevice. | The Virtual Border Router and the Express Connect circuit are not on the same access device. | diagnosis |
| Forbidden.OnlyOneConnection | Cannot connect concurrently between same routers | You cannot initiate a connection on the same router. | diagnosis | |
| Forbidden.OnlyOneConnection | The Specified routers have a connection already | The router is already connected to a router interface. | diagnosis | |
| 400 | Forbidden.OpenPublicIpAddressPool | Authentication is failed for opening public ip address pool. Please apply for permission at the quota center. | Failed to activate the IP address pool service. Apply for the permission in Quota Center. | diagnosis |
| 400 | Forbidden.OperateCustomRouteTable | The operation is forbidden because publish route entry in custom route table. | The operation is forbidden because publishing route entries from a custom route table is not allowed. | diagnosis |
| 400 | Forbidden.OperateManagedFlowLog | Authentication is failed for operate managed flowlog. | Authentication failed when operating the managed flow log. | diagnosis |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | Operations on shared resources are not allowed. | diagnosis |
| 403 | Forbidden.OperationDeleteNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | This user is not allowed to delete this Virtual Border Router. | diagnosis |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | You are not allowed to delete the VBR. | diagnosis | |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | You are not allowed to disable the VBR. | diagnosis | |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | You are not allowed to restore the VBR. | diagnosis | |
| 403 | Forbidden.OperationRecoverNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | This user is not allowed to recover this Virtual Border Router. | diagnosis |
| 403 | Forbidden.OperationTerminateNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | This user is not allowed to terminate this Virtual Border Router. | diagnosis |
| 400 | Forbidden.OwnerAliUid | RAM account or Partner account is forbidden to be OwnerAliUid. | The VbrOwnerId cannot be a Resource Access Management (RAM) users or partner account. It is not allowed as the VBR owner account. | diagnosis |
| Forbidden.PeerGatewayIpNotAllowedByCaller | The caller is not allowed to specify the PeerGatewayIp parameter. | You do not have permissions to set the PeerGatewayIp parameter. | diagnosis | |
| Forbidden.PeeringSubnetMaskNotAllowedByCaller | The caller is not allowed to specify the PeeringSubnetMask parameter. | You are not allowed to specify PeeringSubnetMask. | diagnosis | |
| 400 | Forbidden.PhysicalConnection | Authentication is failed for PhysicalConnectionId | You do not have the permission to operate on the specified PhysicalConnectionId. | diagnosis |
| 400 | Forbidden.PhysicalConnection | Only the parent physical connect account is allowed to update these parameters. | Only the physical port account that owns the shared port is allowed to modify these parameters. | diagnosis |
| 400 | Forbidden.PhysicalConnection | Only parent physical connection account is allowed to modify the virtual physical connection. | Only the physical port that owns the shared port is allowed to perform modifications. | diagnosis |
| Forbidden.RAM | User not authorized to operate on the specified resource | The RAM user is unauthorized to perform the operation. | diagnosis | |
| 400 | Forbidden.RAM | The user is not authorized to operate on the specified resource, or the API operation does not support RAM. | RAM authentication failed. | diagnosis |
| Forbidden.RegionNotFound | Specified region is not found during access authentication. | The specified region does not exist. Check whether the specified region ID is valid. | diagnosis | |
| 404 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | The current region is not supported. | diagnosis |
| Forbidden.RiskControl | This operation is forbidden by Aliyun RiskControl system. | The operation is forbidden by the risk control system. | diagnosis | |
| Forbidden.SecurityGroupNotFound | The specified SecurityGroup is not found | The security group does not exist. | diagnosis | |
| Forbidden.SnapshotNotFound | The specified Snapshot is not found | The snapshot does not exist. | diagnosis | |
| Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach it?s limit. | The number of SNAT entries has reached the upper limit. | diagnosis | |
| 400 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach its limit. | The number of SNAT entries has reached the quota limit. | diagnosis |
| Forbidden.SourceVSwitchId.Duplicated | The specified SourceCIDRis duplicated. | An SNAT entry is already created for the specified vSwitch. | diagnosis | |
| 400 | Forbidden.SourceVSwitchId.IncludeHaVip | There is some HaVips under specified VSwitch | The vSwitch has associated high-availability virtual IP addresses. | diagnosis |
| 403 | Forbidden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | You do not have permission to operate on this resource. Apply for the required permission and try again. | diagnosis |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | The tag resource is duplicated. | diagnosis |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | You do not have the permission to operate on TagKeys. | diagnosis |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | This request is not allowed to operate on the specified tag key. | diagnosis |
| 400 | Forbidden.TransitRouterAttachmentExist | The operation is not allowed because transit router attachment still exists. | You cannot delete a VPC because a transit router connection still exists. | diagnosis |
| Forbidden.UnassociateMaster | Unassociating a master instance is not allowed unless the parameter Force is True. | You cannot disassociate the HAVIP from a primary instance when Force is set to False. | diagnosis | |
| Forbidden.VbrAttached | cannot terminate physical connection when virtual border routers are still attached. | Failed to disable the Express Connect circuit because the Express Connect circuit is associated with a VBR. | diagnosis | |
| Forbidden.VBRExists | physical connection owner's vbr still exists. | The VBR of the Express Connect circuit still exists. | diagnosis | |
| Forbidden.VBRExists | vbr owner's vbr still exists. | The VBR still exists. | diagnosis | |
| 400 | Forbidden.VBRExists | The vbr still exists. | The port cannot be deleted because the Virtual Border Router still exists. | diagnosis |
| 400 | Forbidden.VbrNotAllowModifySiteLink | Can not modify virtualBorderRouter site link, please request authority. | The cross-region connection of the border router cannot be modified. Apply for the required permission. | diagnosis |
| Forbidden.VlanIdNotAllowedByCaller | The caller is not allowed to specify the VlanId. | You are not allowed to specify the VLAN ID. | diagnosis | |
| 400 | Forbidden.VpcNotFound | Specified VPC can not found. | The specified VPC does not exist. Check whether the VPC is correct. | diagnosis |
| 400 | Forbidden.VpconnAliUid | Vpconn UID is forbidden to belong to a RAM account or partner account. | The shared port UID cannot be a Resource Access Management (RAM) users or partner account. | diagnosis |
| 400 | Forbidden.VRouterNotFound | specified virtual switch is not found during access authentication. | The specified virtual switch was not found during access authentication. | diagnosis |
| ForbiddenAction | The user dose not supported this action. | You are not authorized to perform this operation. | diagnosis | |
| 400 | ForbiddenAction | The user does not supported this action. | The user permission is not supported. | diagnosis |
| 400 | ForbiddenAction | The user does not support this action. | You do not have the required permissions. | diagnosis |
| ForbiddenRelease | Forbidden to release a prepaid instance within validity period | You cannot release a subscription VPN gateway within the subscription duration. | diagnosis | |
| FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAY | The Specified CIDR must be in vpc CIDR. | The specified CIDR block must be a subset of the VPC CIDR block. | diagnosis | |
| Forbindden | The specified Instance already bind eip | The ECS instance is associated with an EIP. Disassociate the EIP from the ECS instance before you create forwarding rules. | diagnosis | |
| ForwardEntry.Duplicated | The specified ExternalIp | The IP address already exists. Enter a new IP address. | diagnosis | |
| 400 | FrequentPurchase.EIP | The EIP is purchased too frequently. | Frequent purchase and release of EIPs has been detected on your account. New purchases are temporarily unavailable. | diagnosis |
| FUWU_BIZ_COMMODITY_VERIFY_FAIL | 你购买的模块非法 | The module that you purchased is invalid. | diagnosis | |
| 403 | GetNetworkInterfaceInfoError | Failed to obtain information of secondary ENIs. | Failed to query the information of the secondary network interface controllers (NICs). | diagnosis |
| 400 | HaveConnectionBetweenRouters | Have connection between routers | A connection has already been created between the two routers. | diagnosis |
| 400 | IAbs.InvalidStatus.ValueNotSupported | status is not supported. | The status parameter is invalid. | diagnosis |
| 400 | Idempotence.Processing | Idempotence request is processing. | The request is being processed by an idempotent operation. | diagnosis |
| IdempotentParameterMismatch | Request uses a client token in a previous request but is not identical to that request. | The client token used in the request is invalid. | diagnosis | |
| 400 | IellgalParameter.OwnerAccount | The specified parameter OwnerAccount is not valid. | The specified OwnerAccount parameter is invalid. | diagnosis |
| 400 | IllegalParam.%s | The param of %s is illegal. | The specified parameter is invalid. | diagnosis |
| 400 | IllegalParam.AccessModeValue | The request parameter AccessMode.ModeValue is illegal. | The AccessMode.ModeValue request parameter is invalid. | diagnosis |
| 400 | IllegalParam.AccessTunnelType | The request parameter AccessMode.TunnelType is illegal. | The AccessMode.TunnelType request parameter is invalid. | diagnosis |
| 400 | IllegalParam.Action | The specified Action is invalid. | The action parameter is invalid. | diagnosis |
| 400 | IllegalParam.AddressPoolType | The specified addressPoolType is invalid. | The specified address pool type is invalid. | diagnosis |
| 400 | IllegalParam.AddressType | The specified AddressType is illegal. | The specified AddressType parameter is invalid. | diagnosis |
| 400 | IllegalParam.AggregationInterval | The param of aggregationInterval is illegal. | The sampling interval parameter is invalid. | diagnosis |
| 400 | IllegalParam.AnyPortNotZero | Any port port must be zero. | The parameter is invalid. When the DNAT forwarding protocol is set to Any, the source port and destination port must be 0. | diagnosis |
| 400 | IllegalParam.Asn | The specified Asn is invalid. | The specified ASN does not comply with the specification. | diagnosis |
| 400 | IllegalParam.AssociatedInstanceId | The parameter of AssociatedInstanceId is illegal. | The AssociatedInstanceId parameter is invalid. | diagnosis |
| 400 | IllegalParam.AssociatedPhysicalConnections | The specified AssociatedPhysicalConnections is illegal. | The specified AssociatedPhysicalConnections parameter is invalid. | diagnosis |
| 400 | IllegalParam.AttachmentId | The attachment is invalid. | The Attachment parameter is invalid. | diagnosis |
| 400 | IllegalParam.AuthMethod | One authentication method (Psk or IDaaS) should be specified at least. | At least one authentication method (Psk or IDaaS) must be specified. | diagnosis |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | The specified bandwidth value is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | The param of Bandwidth [%s] is illegal. | The specified bandwidth value is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | Illegal Param of Bandwidth. | The Bandwidth parameter is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | The param of bandwidth is illegal. | The Bandwidth parameter is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | [%s] | The bandwidth value [%s] of the Express Connect circuit is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | Invalid Bandwidth. | The bandwidth value of the Express Connect circuit is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | The param of %s is illegal. | The specified Bandwidth parameter is invalid. Modify the parameter based on the metric description in the API reference and retry. | diagnosis |
| 400 | IllegalParam.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is invalid. | diagnosis |
| 400 | IllegalParam.BgpGroupLocalAsn | VBR BgpGroup localAsn must same with ECR asn. | The LocalAsn of the Virtual Border Router must be the same as the ASN of the ECR. | diagnosis |
| 400 | IllegalParam.BgpGroupLocalAsn | Vbr bgp group local asn must same with ecr asn. | The Alibaba Cloud-side BGP AS number of the BGP group must be the same as the AS number of the ECR. | diagnosis |
| 400 | IllegalParam.ChargeType | The param of %s is illegal. | The ChargeType you entered is invalid. Modify the parameter based on the metric description in the API reference and retry. | diagnosis |
| 400 | IllegalParam.ChargeType | The parameter of ChargeType is illegal. | The ChargeType parameter is invalid. | diagnosis |
| 400 | IllegalParam.CidrBlock | The param of (%s) is illegal. | The CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock is illegal. | The CidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.CidrBlock | The param of cidrBlock is illegal. | The cidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | The CidrBlock is invalid. | diagnosis |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock (%s) is illegal. | The CidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.CidrBlockMask | The param of CidrBlock Mask [%s] is illegal. | The CidrBlock mask is invalid. | diagnosis |
| 400 | IllegalParam.CidrMask | The input CIDR mask is illegal. | The specified CIDR block mask is invalid. | diagnosis |
| 400 | IllegalParam.CidrName | The param of cidrName is illegal. | The specified cidrName is invalid. | diagnosis |
| 400 | IllegalParam.ClientIpPool | The specified ClientIpPool (%s) is invalid. | The client CIDR block (%s) is invalid. | diagnosis |
| 400 | IllegalParam.ClientToken | Token verify failed because client token length too long. | The ClientToken parameter is invalid. | diagnosis |
| 400 | IllegalParam.CompanyLocalizedName | [%s] | The company localized name [%s] is invalid. | diagnosis |
| 400 | IllegalParam.CompanyLocalizedName | Invalid CompanyLocalizedName. | The company localized name is invalid. | diagnosis |
| 400 | IllegalParam.CompanyName | [%s] | The company name [%s] is invalid. | diagnosis |
| 400 | IllegalParam.CompanyName | Invalid CompanyName. | The company name is invalid. | diagnosis |
| 400 | IllegalParam.CrossBorderBandwidth | CrossBorder bandwidth error. | The cross-region bandwidth package is invalid. | diagnosis |
| 400 | IllegalParam.Day | The specified parameter day is illegal. | The specified Day parameter is invalid. | diagnosis |
| 400 | IllegalParam.Description | The param of Description [%s] is illegal. | The Description parameter is invalid. Enter a valid value based on the request parameter requirements. | diagnosis |
| 400 | IllegalParam.Description | The parameter of Description is illegal. | The Description parameter is invalid. | diagnosis |
| 400 | IllegalParam.DestCidrBlock | The destCidrBlock is invalid. | The specified destination address is invalid. | diagnosis |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock is illegal. | The DestinationCidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.DestinationCidrIp | Param DestinationCidrIp illegal. | Invalid parameter: destination CIDR block. | diagnosis |
| 400 | IllegalParam.DetectMultiplier | The specified DetectMultiplier is not in proper range. | The DetectMultiplier parameter is not within the valid range. | diagnosis |
| 400 | IllegalParam.DhcpOptionsSetDescription | The specified DhcpOptionsSetDescription is invalid. | The specified DhcpOptionsSetDescription parameter is invalid. Check whether the parameter is correct. | diagnosis |
| 400 | IllegalParam.DhcpOptionsSetName | The specified DhcpOptionsSetName is invalid. | The specified DhcpOptionsSetName parameter is invalid. Check whether the parameter is correct. | diagnosis |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName parameter is invalid. Check whether the parameter is correct. | diagnosis |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | The specified DomainName is invalid. | diagnosis |
| 400 | IllegalParam.DomainNameServers | The specified DomainNameServers is invalid. | The specified DomainNameServers parameter is invalid. Check whether the parameter is correct. | diagnosis |
| 400 | IllegalParam.EgressAclEntryId | The specified EgressAclEntryId is invalid. | The outbound ACL rule ID is invalid. | diagnosis |
| 400 | IllegalParam.EnableBgp | VPN connection must enable BGP when VPN gateway has enabled BGP. | When BGP is enabled on the VPN gateway, BGP must also be enabled on the VPN connection. | diagnosis |
| 400 | IllegalParam.EnableIpv6 | EnableIpv6 cannot be false when Ipv6CidrBlock is specified. | EnableIpv6 cannot be set to False when Ipv6CidrBlock is specified. | diagnosis |
| 400 | IllegalParam.EnableIpv6 | The parameter of EnableIpv6 is illegal. | The EnableIpv6 parameter is invalid. | diagnosis |
| 400 | IllegalParam.Filter.Key | The filter parameter Key is invalid. | The filter parameter Key is invalid. | diagnosis |
| 400 | IllegalParam.Filter.Value | The filter parameter Value is illegal. | The filter parameter Value is invalid. | diagnosis |
| 400 | IllegalParam.FilterKey.ResourceType | Filter parameters do not support entering only ResourceId or ResourceName without entering ResourceType. | The filter parameters do not support specifying only ResourceId or ResourceName without specifying ResourceType. | diagnosis |
| 400 | IllegalParam.GatewayType | The param of %s is illegal. | The specified GatewayType is invalid. | diagnosis |
| 400 | IllegalParam.HcSourceIp | The specified healthCheck Ip is not valid. | The health check IP address is invalid. | diagnosis |
| 400 | IllegalParam.HealthcheckIp | Healthcheck ip cannot equal with instance ip. | The health check IP address cannot be the same as the instance IP address. | diagnosis |
| 400 | IllegalParam.IDaaSApplicationId | The specified IDaaS application Id is not illegal, the application instance needs to be created based on the dedicated SSL VPN template. | The specified IDaaS application instance ID is invalid. The application instance must be created based on the dedicated SSL VPN template. | diagnosis |
| 400 | IllegalParam.IngressAclEntryId | The specified IngressAclEntryId is invalid. | The inbound ACL rule ID is invalid. | diagnosis |
| 404 | IllegalParam.instanceId | The param of InstanceId is illegal. | The VBR failover group instance parameter is invalid. | diagnosis |
| 400 | IllegalParam.InstanceType | The specified instance type is invalid. Only ECS instances and network interface are allowed. | The bound instance type is not allowed. | diagnosis |
| 400 | IllegalParam.InstanceType | The parameter of InstanceType is illegal. | The InstanceType parameter is invalid. | diagnosis |
| 400 | IllegalParam.InternetChargeType | The param of %s is illegal. | The specified InternetChargeType is invalid. Refer to the API documentation parameter description and retry. | diagnosis |
| 400 | IllegalParam.IpAddress | The specified IP address (%s) is illegal. | The IP address is invalid. | diagnosis |
| 400 | IllegalParam.IpAddress | The specified IpAddress (%s) is illegal. | The IpAddress parameter is invalid. | diagnosis |
| 400 | IllegalParam.IpAddress | The param of %s is illegal. | The specified IP address format is invalid. Refer to the API documentation parameter description and retry. | diagnosis |
| 400 | IllegalParam.IpAddress | The specified IpAddress is illegal. | The specified IpAddress is invalid. | diagnosis |
| 400 | IllegalParam.IpamPool | The specified IPAM pool cannot be empty. | The IPAM Pool cannot be empty. | diagnosis |
| 400 | IllegalParam.Ipv4CidrMask | The specified Ipv4CidrMask is illegal. | The specified Ipv4CidrMask is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6Address | IllegalParam.Ipv6Address %s | The IPv6 address is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6Address | The param of %s is illegal. | The specified IPv6 address is invalid. Check whether your input is correct. | diagnosis |
| 400 | IllegalParam.Ipv6AddressId | IllegalParam.Ipv6AddressId %s | The IPv6 instance ID is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6Cidr | The specified Ipv6CidrBlock is invalid. | The specified Ipv6CidrBlock is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6CidrBlock | The param of %s is illegal. | The IPv6 CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6CidrBlock | The parameter of Ipv6CidrBlock is illegal. | The Ipv6CidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6CidrType | The parameter of IPv6CidrType is illegal. | The IPv6CidrType parameter is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6Isp | The specified Ipv6Isp is illegal. | The specified Ipv6Isp parameter is invalid. | diagnosis |
| 400 | IllegalParam.Ipv6Prefix | The param of Ipv6Prefix is illegal. | The specified Ipv6Prefix parameter is invalid. | diagnosis |
| 400 | IllegalParam.ipVersion | The IP version does not match. | The IP version does not match. | diagnosis |
| 400 | IllegalParam.ipVersion | The param of ipVersion is illegal | The IP version in the parameter is invalid. | diagnosis |
| 400 | IllegalParam.IpVersion | Param IpVersion illegal. | Invalid parameter: IpVersion. | diagnosis |
| 400 | IllegalParam.IpVersion | The param of IPV6 is illegal. | The IpVersion parameter is invalid. Check the parameter and try again. | diagnosis |
| 400 | IllegalParam.IpVersion | The parameter of IpVersion is illegal. | The IpVersion parameter is invalid. | diagnosis |
| 400 | IllegalParam.Isp | The param of %s is illegal. | The EIP cannot be allocated because the ISP parameter is invalid. | diagnosis |
| 400 | IllegalParam.Isp | The param of Isp [%s] is illegal. | The Isp parameter is invalid. Enter a valid value as specified in the request parameters. | diagnosis |
| 400 | IllegalParam.JobDuration | The specified parameter JobDuration is illegal. | The specified task duration is invalid. | diagnosis |
| 400 | IllegalParam.JobId | The specified parameter JobId is illegal. | The specified fault drill task ID is invalid. | diagnosis |
| 400 | IllegalParam.JobType | The specified parameter JobType is illegal. | The specified task type is invalid. | diagnosis |
| 400 | IllegalParam.LeaseTime | LeaseTime [%s] is illegal. | The specified LeaseTime parameter is invalid. | diagnosis |
| 400 | IllegalParam.LineSPContactInfo | LineSPContactInfo is illegal. | The O&M contact information for the ISP line is invalid. | diagnosis |
| 400 | IllegalParam.LineType | [%s] | The Express Connect circuit type [%s] is invalid. | diagnosis |
| 400 | IllegalParam.LineType | Invalid LineType. | The Express Connect circuit type is invalid. | diagnosis |
| 400 | IllegalParam.LocalAsn | The specified LocalAsn is invalid. | The local autonomous system number is invalid. | diagnosis |
| 400 | IllegalParam.LocalAsn | The param of LocalAsn is illegal | The LocalAsn parameter is invalid. | diagnosis |
| 400 | IllegalParam.LocalBgpIp | The specified LocalBgpIp is invalid. | The local BGP address is invalid. | diagnosis |
| 400 | IllegalParam.LocalGatewayIpAndMask | The LocalGatewayIpAndMask value is invalid. | The local gateway IP address and mask are invalid. Correct them and try again. | diagnosis |
| 400 | IllegalParam.LocalSubnet | The specified "LocalSubnet" (%s) is invalid. | The local CIDR block (%s) is invalid. | diagnosis |
| 400 | IllegalParam.LogProjectOrLogStore | The ProjectName and LogStoreName parameters are invalid and must be passed in at the same time or not passed at the same time. | The ProjectName and LogStoreName parameters are invalid. You must specify both parameters or leave both unspecified. | diagnosis |
| 400 | IllegalParam.MaxResults | MaxResults is invalid. | The MaxResults parameter is invalid. | diagnosis |
| 400 | IllegalParam.MinRxInterval | The specified MinRxInterval is not in proper range. | The specified MinRxInterval is not within the valid range. | diagnosis |
| 400 | IllegalParam.MinTxInterval | The specified MinTxInterval is not in proper range. | The specified MinTxInterval is not within the valid range. | diagnosis |
| 400 | IllegalParam.Mode | The specified value of the parameter Mode is invalid. | The value of the Mode parameter is invalid. | diagnosis |
| 400 | IllegalParam.Mode | The specified Mode is invalid. | The input parameter Mode is invalid. | diagnosis |
| 400 | IllegalParam.Mode | The parameter of Mode is illegal. | The parameter Mode is invalid. | diagnosis |
| 400 | IllegalParam.Name | The param of Name [%s] is illegal. | The parameter Name is invalid. Enter a valid value as specified in the request parameter requirements. | diagnosis |
| 400 | IllegalParam.NatIpPort | The param of NatIpPort is illegal. | The NatIpPort parameter is invalid. | diagnosis |
| 400 | IllegalParam.NetworkInterfaceId | The param of NetworkInterfaceId is illegal. | The NetworkInterfaceId parameter is invalid. | diagnosis |
| 400 | IllegalParam.NetworkType | The specified NetworkType (%s) is invalid. | The network type is invalid. | diagnosis |
| 400 | IllegalParam.NetworkType | IllegalParam.NetworkType %s | The NetworkType is invalid. | diagnosis |
| 400 | IllegalParam.NetworkType | The param of %s is illegal. | The NetworkType you entered is invalid. Check whether your input is correct. | diagnosis |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | The parameter NextToken is invalid. | diagnosis |
| 400 | IllegalParam.NextTokenExpired | The specified NextToken is invalid. | The parameter NextToken is invalid. | diagnosis |
| 400 | IllegalParam.NextTokenExpired | The parameter of NextTokenExpired is illegal. | The parameter NextTokenExpired is invalid. | diagnosis |
| 400 | IllegalParam.NoNameAuthentication | Aliyun account has not passed the real name authentication and do not meet the purchase conditions. | You have not completed real-name verification and do not meet the purchase requirements. Log on to the Account Center to complete real-name verification. | diagnosis |
| 400 | IllegalParam.OrderKey | The specified OrderKey is invalid. | The parameter OrderKey is invalid. | diagnosis |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | diagnosis |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | The OrderMode parameter is invalid. | diagnosis |
| 400 | IllegalParam.OrderType | The specified OrderType is invalid. | The parameter OrderType is invalid. | diagnosis |
| 400 | IllegalParam.OwnerAliUid | The specified AliUid is invalid. | The user ID is an invalid parameter. | diagnosis |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The VbrOwnerId parameter is invalid. | diagnosis |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | The Alibaba Cloud user ID of the resource owner is invalid. | diagnosis |
| 400 | IllegalParam.PeerAsn | The param of PeerAsn is illegal | The PeerAsn parameter is invalid. | diagnosis |
| 400 | IllegalParam.PeeringIpv6SubnetMask | The PeeringIpv6SubnetMask value is invalid. | The mask is invalid. Correct it and try again. | diagnosis |
| 400 | IllegalParam.peerIpAddress | The param of peerIpAddress is illegal | The peerIpAddress parameter is invalid. | diagnosis |
| 400 | IllegalParam.PeerIpAddress | The param of PeerIpAddress is illegal. | The peer IP address is invalid. | diagnosis |
| 400 | IllegalParam.PeerLocation | [%s] | The geographic location [%s] of the Express Connect circuit is invalid. | diagnosis |
| 400 | IllegalParam.PeerLocation | Invalid PeerLocation. | The geographic location of the Express Connect circuit is invalid. | diagnosis |
| 400 | IllegalParam.PmCertificateNo | The specified PmCertificateNo (%s) is illegal. | The PmCertificateNo parameter is invalid. | diagnosis |
| 400 | IllegalParam.PmCertificateNo | [%s] | The ID number [%s] of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmCertificateNo | Invalid PmCertificateNo. | The ID number of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmCertificateType | [%s] | The ID type [%s] of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmCertificateType | Invalid PmCertificateType. | The ID type of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmContactInfo | [%s] | The contact information [%s] of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmContactInfo | Invalid PmContactInfo. | The contact information of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmGender | [%s] | The gender [%s] of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmGender | Invalid PmGender. | The gender of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmName | [%s] | The name [%s] of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.PmName | Invalid PmName. | The name of the construction engineer is invalid. | diagnosis |
| 400 | IllegalParam.Policy | Param Policy illegal. | Invalid parameter: Policy. | diagnosis |
| 400 | IllegalParam.PortRange | The specified port range is invalid. | The port range parameter is invalid. | diagnosis |
| 400 | IllegalParam.Priority | The specified Priority is invalid. | The priority parameter is invalid. | diagnosis |
| 400 | IllegalParam.Priority | The specified Priority is illegal or the same as other mirroring sessions. | The specified Priority is invalid or is the same as that of another traffic mirror session. | diagnosis |
| 400 | IllegalParam.PrivateIpAddress | The specified PrivateIpAddress is illegal. | The specified PrivateIpAddress is invalid. Check the parameter constraints and try again after making corrections. | diagnosis |
| 400 | IllegalParam.ProductType | The specified ProductType is illegal. | The ProductType parameter is invalid. | diagnosis |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | The protocol parameter is invalid. | diagnosis |
| 400 | IllegalParam.Protocol | Param Protocol illegal. | Invalid parameter: Protocol. | diagnosis |
| 400 | IllegalParam.RegionId | The specified regionId is illegal. | The regionId is invalid. | diagnosis |
| 400 | IllegalParam.RemoteSubnet | The specified "RemoteSubnet" (%s) is invalid. | The peer CIDR block (%s) is invalid. | diagnosis |
| 400 | IllegalParam.ReservedCidrMask | IllegalParam.ReservedCidrMask | The ReservedCidrMask parameter is invalid. Enter a valid value based on the request parameter constraints. | diagnosis |
| 400 | IllegalParam.ResourceGroupId | Invalid ResourceGroupld value. | The specified resource group is invalid or does not exist. | diagnosis |
| 400 | IllegalParam.ResourceId | The input parameter resource ID is invalid. | The specified resource ID parameter is invalid. | diagnosis |
| 400 | IllegalParam.ResourceOwnerId | The param of resource owner ID is illegal. | The resource owner ID parameter is invalid. | diagnosis |
| 400 | IllegalParam.ResourceType | Invalid Resource Type value. | The specified ResourceType is not supported or is invalid. | diagnosis |
| 400 | IllegalParam.ResourceType | Invalid %s value. | The specified ResourceType parameter is invalid. | diagnosis |
| 400 | IllegalParam.Role | The specified Role is invalid. | The Role parameter is invalid. | diagnosis |
| 400 | IllegalParam.RouteDest | The specified RouteDest is invalid | The destination address is invalid. | diagnosis |
| 400 | IllegalParam.RouteEntryCidrDuplicate | The specified CIDR block already exists. | A duplicate route CIDR block exists. | diagnosis |
| 400 | IllegalParam.RouteEntryName | The param of %s is illegal. | The specified route name is invalid. | diagnosis |
| 400 | IllegalParam.RouteEntryType | The specified RouteEntryType is invalid. | The specified route entry type is invalid. | diagnosis |
| 400 | IllegalParam.RouteEntryType | The parameter of RouteEntryType is illegal. | The RouteEntryType parameter is invalid. | diagnosis |
| 400 | IllegalParam.RouteLimit | The operation is failed because of bgp group max route entry num quota exceed. | The number of route entries that each BGP peer in the BGP group can receive exceeds the quota. | diagnosis |
| 400 | IllegalParam.SecondaryCidrBlock | SecondaryCidrBlock is illegal. | The secondary CIDR block parameter is invalid. | diagnosis |
| 400 | IllegalParam.SecondaryCidrBlock | The parameter of SecondaryCidrBlock is illegal. | The SecondaryCidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.SecondaryCidrMask | The specified Secondary CIDR Mask is illegal. | The specified SecondaryCidrMask is invalid. | diagnosis |
| 400 | IllegalParam.SecurityProtectionTypes | The param of securityProtectionTypes is illegal. | The specified SecurityProtectionTypes parameter is invalid. | diagnosis |
| 400 | IllegalParam.ServiceLocation | The param of serviceLocation is illegal. | The ServiceLocation parameter is invalid. | diagnosis |
| 400 | IllegalParam.ServiceProvider | The parameter of ServiceProvider is illegal. | The ServiceProvider parameter is invalid. | diagnosis |
| 400 | IllegalParam.SessionLogDeliveryDestination | The specified Delivery Destination is illegal. | The session log delivery destination parameter (SessionLogDeliveryDestination) has an invalid format. | diagnosis |
| 400 | IllegalParam.SessionLogDeliveryType | The specified Delivery Type is illegal. | The session log log delivery destination type parameter SessionLogDeliveryType does not meet the requirements. | diagnosis |
| 400 | IllegalParam.ShareType | The specified parameter ShareType is illegal. | The ShareType parameter is invalid. | diagnosis |
| 400 | IllegalParam.Si | [%s] | The Express Connect circuit construction company [%s] is invalid. | diagnosis |
| 400 | IllegalParam.Si | Invalid Si. | The Express Connect circuit construction company is invalid. | diagnosis |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock is illegal. | The SourceCidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.SourceCidrIp | Param SourceCidrIp is illegal. | Invalid parameter: source CIDR block. | diagnosis |
| 400 | IllegalParam.Spec | The parameter Spec is illegal. | The Spec is invalid. | diagnosis |
| 400 | IllegalParam.Spec | The param of Spec is illegal. | The Spec is invalid. | diagnosis |
| 400 | IllegalParam.Spec | The param of ExpectSpec is illegal | The ExpectSpec parameter is invalid. | diagnosis |
| 400 | IllegalParam.Spec | The spec is illegal. | The spec is invalid. | diagnosis |
| 400 | IllegalParam.Spec | The parameter of UserCidr is illegal. | The Spec parameter is invalid. | diagnosis |
| 400 | IllegalParam.TargetType | The parameter of TargetType is illegal. | The TargetType parameter is invalid. | diagnosis |
| 400 | IllegalParam.TrafficMirrorRuleId | The specified traffic mirror rule instance ID is invalid. | The traffic mirroring filter rule instance ID parameter is invalid. | diagnosis |
| 400 | IllegalParam.TrafficPath | The param of trafficPath is illegal. | The specified trafficPath parameter is invalid. | diagnosis |
| 400 | IllegalParam.TunnelCidr | The specified TunnelCidr is invalid. | The TunnelCidr parameter is invalid. | diagnosis |
| 400 | IllegalParam.TunnelId | The specified TunnelId is invalid. | The TunnelId parameter is invalid. | diagnosis |
| 400 | IllegalParam.Type | The parameter of Type is illegal. | The Type parameter is invalid. | diagnosis |
| 400 | IllegalParam.UnsupportedAccessPoint | The access point type does not support the creation of a highly reliable physical connection. | The access point type does not support creating high-availability Express Connect circuits. | diagnosis |
| 400 | IllegalParam.UserCidr | UserCidr is not a valid or strict address. | The UserCidr parameter is invalid. | diagnosis |
| 400 | IllegalParam.UserCidr | The parameter of UserCidr is illegal. | The UserCidr parameter is invalid. | diagnosis |
| 400 | IllegalParam.VlanId | The parameter VlanId is illegal. | The VlanId parameter is invalid. | diagnosis |
| 400 | IllegalParam.VlanId | The param of VlanId is illegal. | The VlanId parameter is invalid. | diagnosis |
| 400 | IllegalParam.VlanId | vlan id has been used in physical connection | The VlanId is already in use. | diagnosis |
| 400 | IllegalParam.VpcIpv6CidrBlock | The parameter of VpcIPv6CidrBlock is illegal. | The VpcIPv6CidrBlock parameter is invalid. | diagnosis |
| 400 | IllegalParam.VpconnAliUid | The specified VpconnAliUid is not illegal. | The AliUid of the Vpconn is invalid. | diagnosis |
| 400 | IllegalParam.VpconnAliUid | The specified AliUid of Vpconn is illegal. | The AliUid parameter of the Vpconn is invalid. | diagnosis |
| 400 | IllegalParam.VRouterType | The VRouterType is not supported. | The VRouterType parameter is invalid. | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The param of VSwitchCidrReservationMask is illegal. | The VSwitchCidrReservationMask parameter is invalid. Modify the parameter based on the metric description in the API reference and retry. | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | The specified VSwitchCidrReservationMask must be greater than the vSwitch mask + 2. | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask by 1. | The specified VSwitchCidrReservationMask must be greater than the vSwitch mask + 1. | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be at least 2 bits greater than the vSwitch mask. | The specified VSwitchCidrReservationMask must be at least 2 greater than the vSwitch mask. | diagnosis |
| 400 | IllegalParam.Zone | The specified zone is invalid. | The Zone parameter is invalid. | diagnosis |
| 400 | IllegalParam.ZoneId | The parameter of ZoneId is illegal. | The ZoneId parameter is invalid. | diagnosis |
| 400 | IllegalParam.Zones | The values of Zones [%s] are invalid. | The Zones parameter is invalid. | diagnosis |
| 400 | IllegalParamException.LocalGatewayIpAndMask | The param of LocalGatewayIpAndMask is illegal. | The LocalGatewayIpAndMask parameter is invalid. | diagnosis |
| 400 | IllegalParamFormat | IllegalParamFormat | The parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat | The param of %s is illegal. | The specified parameter is invalid. | diagnosis |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | The parameter mode is invalid. | diagnosis |
| 400 | IllegalParamFormat.Description | The specified description is invalid. | The description parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified destination CIDR block is invalid. | The destination CIDR block format is invalid. | diagnosis |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified dst CIDR block is invalid. | The destination CIDR block parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat.DstPortRange | The specified format of destination port range is invalid. | The destination port range parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat.Name | The specified Name is invalid. | The name parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat.NatIp | The param format of %s[%s] is illegal. | The NatIp format is invalid. | diagnosis |
| 400 | IllegalParamFormat.NatIpCidr | The param format of NatIpCidr is illegal. | The NatIpCidr parameter is invalid. | diagnosis |
| 400 | IllegalParamFormat.OutIp | The param format of OutIp is illegal. | The OutIp parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat.ReservedCidr | IllegalParamFormat.ReservedCidr | The CIDR block format is invalid. | diagnosis |
| 400 | IllegalParamFormat.SrcCidrBlock | The format of the specified source CIDR block is invalid. | The source CIDR block parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat.SrcPortRange | The format of the specified source port range is invalid. | The source port range parameter format is invalid. | diagnosis |
| 400 | IllegalParamFormat.VSwitchCidrReservationCidr | The param format of VSwitchCidrReservationCidr is illegal. | The VSwitchCidrReservationCidr parameter format is invalid. | diagnosis |
| 400 | IllegalParamSize.AssociatedInstanceId | The param size of AssociatedInstanceId is illegal. | The length of the AssociatedInstanceId parameter is invalid. | diagnosis |
| 400 | IllegalParamSize.EgressRules | The number of egress rules is invalid. | The number of outbound traffic mirror filter rules is invalid. | diagnosis |
| 400 | IllegalParamSize.IngressRules | The specified number of ingress rules is invalid. | The number of inbound traffic mirror filter rules is invalid. | diagnosis |
| 400 | IllegalParamSize.Rules | The specified size of rules is invalid. | The number of traffic mirroring filter rule parameters is invalid. | diagnosis |
| 400 | IllegalParamSize.Zones | An invalid number of zones is specified. | The size of the Zones array is invalid. | diagnosis |
| 400 | IllegealParam.NextHopType | The parameter NewNextHopType is illegal. | The next hop type of the route entry is invalid. | diagnosis |
| IncorrcetRouteEntryStatus | Some route entry status blocked this operation. | One or more routes in the route table are in the Pending or Modifying state. | diagnosis | |
| 400 | IncorrectBusinessStatus.FlowLog | The business status of flowLog is incorrect. | The current service status does not support creating a flow log instance. | diagnosis |
| 400 | IncorrectBusinessStatus.PconnIdList | The business status of PconnIdList is incorrect. | The Express Connect circuit has an overdue payment. This operation cannot be performed. | diagnosis |
| 400 | IncorrectBusinessStatus.PublicIpAddressPool | The business status of publicIpAddressPool is incorrect. | The current service status does not support creating an IPAM pool instance. | diagnosis |
| 400 | IncorrectBusinessStatus.ResourceId | The specified resource business status is invalid. | The specified resource has an overdue payment. | diagnosis |
| 400 | IncorrectBusinessStatus.TrafficMirror | The business status of traffic mirror is incorrect. | The business status of traffic mirroring is incorrect. | diagnosis |
| 404 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | ClassicLink is already enabled for this VPC. You do not need to enable ClassicLink again. | diagnosis |
| IncorrectEipStatus | Current elastic IP status does not support this operation | The status of the EIP does not support the operation. | diagnosis | |
| IncorrectEipStatus | Current elastic IP status does not support this operation. | You cannot perform the operation when the specified EIP is in the current state. | diagnosis | |
| IncorrectGlobalAccelerationInstanceIdStatus | Current GlobalAccelerationInstance status does not support this operation. | The GA instance in this state does not support this operation. | diagnosis | |
| IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is InUse. | The operation can be performed only when the HAVIP is in the InUse state. | diagnosis | |
| 400 | IncorrectHaVipStatus | This operation is denied because satus of the specified HaVip is neither Available nor InUse. | The operation cannot be performed because the HaVip is in the Available or InUse state. | diagnosis |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it’s status is Available or InUse. | This operation can be performed only when the HaVip is in the Available or InUse state. | diagnosis |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when its status is Available or InUse. | This operation can be performed on the HaVip only when the HaVip is in the Available or InUse state. | diagnosis |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is Available or InUse. | The operation is allowed only when the HaVip instance is in the Available or InUse state. | diagnosis |
| IncorrectInstanceStatus | The current status of instance does not support this operation. | This operation cannot be performed while the instance is in the current state. | diagnosis | |
| IncorrectInstanceStatus | The current status of the resource does not support this operation. | The specified resource is in a state that does not support the operation. | diagnosis | |
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it’s status is Running or Stopped. | The operation can be performed only when the ECS instance is in the Running or Stopped state. | diagnosis | |
| IncorrectInstanceStatus | Current instance status does not support this operation. | This operation cannot be performed while the instance is in the current state. | diagnosis | |
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it's status is Running or Stopped. | You can do this operation only when the ECS instance is running or stopped. | diagnosis | |
| IncorrectOppositeInterfaceInfo | Cannot connect on the same router | You are not allowed to connect to the same router. | diagnosis | |
| IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId is wrong. Maybe the RouterInterface or Router does not exist | Based on the configuration of OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId, the value of OppositeRouterInterface is invalid. The router or router interface may not exist. | diagnosis | |
| 400 | IncorrectOppositeInterfaceInfo | The peer router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId is incorrect. The router interface or router may not exist, the parameters may not match, or the router interface is not the accepter. | diagnosis |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId is incorrect. | diagnosis |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | The peer router interface information specified by OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId is incorrect. | diagnosis |
| IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId must be all set. | You must set the following parameters: OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeRouterOwnerId. | diagnosis | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId are all required. | The parameters OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId must all be specified. | diagnosis |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId must be all set. | The parameters OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId must all be specified. | diagnosis |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Active. | This operation can be performed only when the router interface is in the Active state. | diagnosis |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Idle. | This operation can be performed only when the router interface is in the Idle state. | diagnosis |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Inactive. | This operation can be performed on the router interface only when it is in the Inactive state. | diagnosis |
| IncorrectRole.NotInitiatingSide | The specified RouterInterface is not InitiatingSide. | The specified router interface is not an initiator. Select an initiator router interface. | diagnosis | |
| IncorrectRouteEntryStatus | Vpc NotStable route entry. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | diagnosis | |
| IncorrectRouteEntryStatus | The vpc has NotStable routeEntry status. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | diagnosis | |
| IncorrectRouteEntryStatus | VBR has NotStable route entry. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | diagnosis | |
| IncorrectRouteEntryStatus | Specified routeEntry status error. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | diagnosis | |
| IncorrectRouteEntryStatus | Some route entry status blocked this operation. | The operation is not supported because the route table contains routes in the Pending or Modifying state. | diagnosis | |
| 404 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | The current status of the route table does not support the delete operation. | diagnosis |
| 400 | IncorrectRouteTableStatus.RouteEntryExist | You cannot delete the specified route table because it still has custom route entry. | The specified route table cannot be deleted because it still contains custom route entries. | diagnosis |
| 400 | IncorrectRouteTableType | Route table can be deleted by this action only when it is type is custom. | The route table can be deleted only when its type is custom. | diagnosis |
| IncorrectStatus | RouterInterface can be operated by this action only when the status is Active | The operation can be performed only when the the router interface is in the Active state. | diagnosis | |
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Inactive. | The operation can be performed only when the router interface is in the Inactive state. | diagnosis | |
| IncorrectStatus | RouterInterface can be operated by this action only when it’s status is Idle. | The operation can be performed only when the router interface is in the Idle state. | diagnosis | |
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Active. | The operation can be performed only when the the router interface is in the Active state. | diagnosis | |
| 400 | IncorrectStatus | HaVip can be deleted only when it is status is Available. | The high-availability virtual IP address (HaVip) cannot be deleted. The HaVip can be deleted only when it is in the Available state. | diagnosis |
| IncorrectStatus | This openeration would be allowed only when status of this RouterInterface is Idle/Inactive. | You cannot perform the operation. You can perform the operation only when the router interface is in the Idle or Inactive state. | diagnosis | |
| IncorrectStatus | Vswtich status not stable. | The VSwitch is in the status of Pending or Modifying. Please try again later. | diagnosis | |
| 400 | IncorrectStatus | HaVip can be deleted only when status is Available or InUse. | The high-availability virtual IP address (HaVip) cannot be deleted because its current state does not support this operation. | diagnosis |
| 400 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active,idle or inactive. | This operation can be performed on the router interface only when it is in the Active, Idle, or Inactive state. | diagnosis |
| 400 | IncorrectStatus.%s | %s [%s] status is invalid. | The state of the specified instance is invalid. | diagnosis |
| 400 | IncorrectStatus.BgpPeer | Invalid BgpPeer status cannot operate. | The operation cannot be performed because the BgpPeer is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.BondRiConnection | The BondRi state is unstable. Check the instance state and try again. | The BondRi is in a transitional state. Confirm the instance status and retry. | diagnosis |
| 400 | IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | The current state of the Cloud Enterprise Network (CEN) instance is incorrect. | diagnosis |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | The operation failed because the VPC has not reached a stable state in the CEN instance. | diagnosis |
| 400 | IncorrectStatus.CenStatus | Cen status must not be middle status. | Check the state of the Cloud Enterprise Network (CEN) instance. | diagnosis |
| 400 | IncorrectStatus.CidrReservation | The status of the CIDR reservation is incorrect. | The current state of the reserved CIDR block does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.DhcpOptionsSet | The DhcpOptionsSet status does not support this operation. | The DHCP options set is in a transitional state. Wait until the instance status reaches a stable state and try again. | diagnosis |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the EgressOnlyRlue is incorrect. | The specified EgressOnlyRule cannot be deleted in its current state. | diagnosis |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the specified IPv6EgressOnlyRule is incorrect. | The specified IPv6EgressOnlyRule is in a transitional state. | diagnosis |
| 400 | IncorrectStatus.Eip | An EIP status error occurred. | The state of the elastic IP address (EIP) is incorrect. | diagnosis |
| 400 | IncorrectStatus.EipAddress | The status of the EIP is incorrect. | The state of the elastic IP address (EIP) is incorrect. | diagnosis |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | The flow log cannot be stopped because it is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.ForwardEntry | The status of %s [%s] is incorrect. | The DNAT entry instance cannot be deleted because the instance status is invalid. | diagnosis |
| 400 | IncorrectStatus.FullNatEntry | The status of %s [%s] is incorrect. | The current state of the FullNatEntry is incorrect. | diagnosis |
| 400 | IncorrectStatus.GatewayRouteTable | The status of %s [%s] is incorrect. | The specified gateway route table is in a transitional state. Try again later. | diagnosis |
| 400 | IncorrectStatus.InstanceStatusInvalid | The specified Instance does not exist in our records. | The state of the instance is invalid. | diagnosis |
| 400 | IncorrectStatus.Ip | The status of ip is incorrect. | The state of the IP address is incorrect. | diagnosis |
| 500 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | The IPv4 gateway is in a transitional state. | diagnosis |
| 400 | IncorrectStatus.Ipv4Gateway | The status of %s [%s] is incorrect. | The specified IPv4 gateway is in a transitional state. Try again later. | diagnosis |
| 400 | IncorrectStatus.Ipv6Address | The IPv6 address of the specified next hop is being assigned or deleted. | The IPv6 address of the specified next hop is being created or deleted. | diagnosis |
| 400 | IncorrectStatus.Ipv6Gateway | The status of %s [%s] is incorrect. | The specified IPv6 gateway is in a transitional state. Try again later. | diagnosis |
| 400 | IncorrectStatus.Ipv6Instance | The status of %s [%s] is incorrect. | The specified IPv6 instance is in a transitional state. Try again later. | diagnosis |
| 400 | IncorrectStatus.Ipv6InternetBandwidth | The status of the IPv6InternetBandwidth is incorrect. | The current state of the IPv6 Internet bandwidth does not support creating an IPv6 egress-only rule. | diagnosis |
| 400 | IncorrectStatus.NatGateway | The status of NAT gateway is incorrect. | The state of the NAT gateway is incorrect. | diagnosis |
| 400 | IncorrectStatus.NatGateway | The status of natgateway is incorrect. | The state of the NAT gateway is incorrect. | diagnosis |
| 400 | IncorrectStatus.NatGateway | %The status of %s [%s] is incorrect. | The state of the NAT gateway is incorrect. | diagnosis |
| 400 | IncorrectStatus.NatGateway | The NatGateway instance is being deleted and needs to wait until the process is complete. | The NAT gateway is being deleted. Wait until the deletion is complete. | diagnosis |
| 400 | IncorrectStatus.NatGateway | The status of the specified NatGateway is incorrect. | The specified NAT gateway is in a transitional state. | diagnosis |
| 400 | IncorrectStatus.NATGW | The status of the specified NAT gateway is abnormal. | The NAT gateway is in an abnormal state. | diagnosis |
| 400 | IncorrectStatus.NATGW | NATGW status is invalid. | The state of the NAT gateway is incorrect. | diagnosis |
| 400 | IncorrectStatus.NatIp | The status of %s [%s] is incorrect. | The current state of the NAT IP address is incorrect. | diagnosis |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The elastic network interface (ENI) is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | The current state of the network interface does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.NextHop | The status of %s [%s] is incorrect. | The specified next hop resource is in a transient state. | diagnosis |
| 400 | IncorrectStatus.null | RouterInterface status is null. | The RI state is empty. | diagnosis |
| 400 | IncorrectStatus.OnlyForInit | Only the init status failover test job can be started. | Only fault drill tasks in the pending state can be modified or started. | diagnosis |
| 400 | IncorrectStatus.OnlyForInitOrStopped | Only failover test job in the status of init or stopped can be deleted. | Only fault drill tasks in the pending or completed state can be deleted. | diagnosis |
| 400 | IncorrectStatus.OnlyForTesting | Only the failover test job in the testing state can be stopped. | Only fault drill tasks in the running state can be stopped. | diagnosis |
| 400 | IncorrectStatus.PconnIdList | The status of PconnIdList is incorrect. | The current state of the Express Connect circuit is abnormal. This operation cannot be performed. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in the Allocated state. | The Express Connect circuit is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of PhysicalConnection is incorrect. | The PhysicalConnection is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s is incorrect. | The PhysicalConnection is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of [%s] is incorrect. | The PhysicalConnection is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in Allocated state. | The specified PhysicalConnectionId is not in the Allocated state. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status (%s) does not support this operation. | The instance status is incorrect. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | [%s] | The Express Connect circuit [%] is in an abnormal state. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | Invalid physical connection status. | The Express Connect circuit is in an abnormal state. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnectionLOA | [%s] | The construction state [%s] of the Express Connect circuit is abnormal. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnectionLOA | Invalid Express Connect circuit LOA status. | The construction state of the Express Connect circuit is abnormal. | diagnosis |
| 400 | IncorrectStatus.PrefixList | The status of prefixList is incorrect. | The prefix list is in a transient state and cannot be operated on. | diagnosis |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of %s [%s] is incorrect. | The EIP cannot be allocated because the IP address pool is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of PublicIpAddressPool is incorrect. | The address pool instance is not in a stable state. EIP allocation is not allowed. | diagnosis |
| 400 | IncorrectStatus.Qos | The status of QoS is incorrect. | The current QoS policy is in an abnormal state and cannot be operated on. Try again later. | diagnosis |
| 400 | IncorrectStatus.ResourceId | The specified resource status is invalid. | The resource corresponding to the specified resource ID is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.RouteEntry | The status of %s [%s] is incorrect. | The route entry is in a transient state. | diagnosis |
| 400 | IncorrectStatus.RouteEntryPublishStatus | Route entry publish status is incorrect. | The route publish status of the route entry is incorrect. | diagnosis |
| 400 | IncorrectStatus.RoutePropagationStatus | Route table propagation status not stable. Please wait and try again. | The route table propagation status has not reached a stable state. Try again later. | diagnosis |
| 400 | IncorrectStatus.RouterEntry | The status of %s [%s] is incorrect. | The current state of the RouterEntry is incorrect. | diagnosis |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because status of this RouterInterface is not correct. | The instance cannot be deleted in its current state. Wait until the state changes and try again. | diagnosis |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because the status of this RouterInterface is not correct. | The instance cannot be deleted in its current state. Wait until the state changes and try again. | diagnosis |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | The router interface is in an abnormal state. | diagnosis |
| 404 | IncorrectStatus.RouteTable | The status of the specified route table is incorrect. | The specified route table is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.RouteTable | The route table is in an invalid state. | The specified route table is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.RouteTableStatus | The status of the specified RouteTable is incorrect. | The specified route table is not in a stable state. | diagnosis |
| 400 | IncorrectStatus.SnatEntry | The Specified SnatEntry is not stable status, can not operation | The specified SNAT entries are not in a stable state and cannot be operated. | diagnosis |
| 400 | IncorrectStatus.SystemPrefixList | This is not allowed to operate system prefixList. | Operations on the system prefix list are not allowed. | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorFilter | The status of traffic mirror filter is incorrect. | The traffic mirror filter is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorRule | The status of traffic mirror rule is incorrect. | The traffic mirroring filter rule is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorSession | The status of traffic mirror session is incorrect. | The traffic mirror session is in an incorrect state. | diagnosis |
| 400 | IncorrectStatus.VBR | The status of VBR is incorrect. | The VBR status is invalid. | diagnosis |
| 400 | IncorrectStatus.VbrId | The status of %s is incorrect. | The VBR instance status is invalid. | diagnosis |
| 400 | IncorrectStatus.VirtualPhysicalConnection | The status of PhysicalConnection [%s] is incorrect. | The status of the shared Express Connect circuit [%s] is invalid. | diagnosis |
| 400 | IncorrectStatus.Vpc | The status of %s [%s] is incorrect. | The current instance status is not in a stable state. | diagnosis |
| 400 | IncorrectStatus.Vpc | Vpc status is invalid. | The VPC is not in a stable state. | diagnosis |
| 400 | IncorrectStatus.Vpc | Vpc incorrect status. | The VPC is not in a stable state. | diagnosis |
| 400 | IncorrectStatus.Vpc | The status of the specified VPC is incorrect. | The specified VPC is not in a stable state. | diagnosis |
| 400 | IncorrectStatus.VpcDhcpOptionsSet | The dhcpOptionsSet status of VPC does not support this operation. | The operation is not allowed because the DHCP options set associated with the current VPC is in a transitional state. | diagnosis |
| 400 | IncorrectStatus.VpcDhcpStatus | The DhcpOptionsSet status of vpc does not support this operation. | The instance status of the DHCP options set in the current VPC does not support the operation to delete a VPC. | diagnosis |
| 400 | IncorrectStatus.VpcDnsHostnameStatus | The DnsHostname status of vpc does not support this operation. | The current VPC private domain name status does not support this operation. | diagnosis |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | The status of %s [%s] is invalid. | diagnosis |
| 400 | IncorrectStatus.VpcRouteEntry | The status of the specified routeEntry is invalid. | The VPC route entry status is invalid. | diagnosis |
| 400 | IncorrectStatus.VSWITCH | The status of the specified VSwitch is invalid. | The virtual switch status is abnormal. | diagnosis |
| 400 | IncorrectStatus.Vswitch | The status of %s [%s] is incorrect. | The specified vSwitch is not in a stable state. | diagnosis |
| 400 | IncorrectStatus.VSwitch | The specified vSwitch status is invalid. | The virtual switch status is abnormal. | diagnosis |
| IncorrectVpcStatus | Current VPC status does not support this operation. | This operation cannot be performed when the VPC is in the current state. | diagnosis | |
| 404 | IncorrectVSwitchId | Specified vSwtich instance is not found during access authentication. | The specified virtual switch (vSwitch) instance was not found during permission verification. | diagnosis |
| IncorrectVSwitchStatus | VSwitch Creation simultaneously is not supported. | The system failed to create the vSwitch and one or more vSwitches that belong to the VPC are in the Creating state. | diagnosis | |
| 400 | IncorrectVSwitchStatus | Some virtual switch is modifying within the same VPC. | Multiple virtual switches in the same VPC are in the Modifying state. Try again later. | diagnosis |
| 400 | IncorrectVSwitchStatus | The current virtual switch status does not support this operation. | The vSwitch is in the Pending state and cannot be deleted. | diagnosis |
| IncorretForwardEntryStatus | Some Forward entry status blocked this operation.. | The operation is not supported because one or more DNAT entries in the DNAT table are in the Pending or Modifying state. | diagnosis | |
| IncorretForwardEntryStatus | The Specified forwardEntry is not stable status | The status of the DNAT entry is unstable. | diagnosis | |
| IncorretForwardEntryStatus | The Specified forwardEntry is not exist | The specified DNAT entry does not exist. | diagnosis | |
| IncorretRouteEntryStatus | You cannot create a route because vSwitches in the VPC are in the Adding, Modifying, or Deleting state. | diagnosis | ||
| IncorretSnatEntryStatus | Some Snat entry status blocked this operation.. | One or more SNAT entries in the SNAT table are in the Pending or Modifying state. | diagnosis | |
| IncorretSnatEntryStatus | The Specified SnatEntry is not stable status | The SNAT entry is in an unstable state. | diagnosis | |
| IncorretVSwitchStatus | The system failed to create vSwitches because some vSwitches are in the Pending state. | diagnosis | ||
| 400 | InnerError | Internal system error. | An internal system error occurred. | diagnosis |
| 404 | Instance.NotExist | The instance not exist. | The instance does not exist. | diagnosis |
| 400 | INSTANCE.STATUS.NOT.ALLOW | Instance status not allow | The instance status does not allow this operation. | diagnosis |
| 400 | Instance.StatusError | The status of instance error. | The instance status is invalid. | diagnosis |
| 400 | InstanceExist.NatgwScheduledMigration | The scheduled migration information of the NAT gateway already exists. | The scheduled migration information for the NAT gateway already exists. | diagnosis |
| 400 | InstanceNotExist.NatGatewayId | The NAT gateway instance is not exist. | The NAT gateway instance does not exist. | diagnosis |
| 400 | InstanceNotExist.NATGWSchedule | The scheduled migration information of the NAT gateway does not exist. | The scheduled migration information for the NAT gateway does not exist. | diagnosis |
| 404 | InstanceNotExists | Instance not exists. | The instance to be deleted does not exist. | diagnosis |
| INSTANCE_HAS_INACTIVE_CHANGE | The system is processing changes. | diagnosis | ||
| InsufficientBalance | Your account does not have enough balance. | Your account balance is insufficient. Top up your account and try again. | diagnosis | |
| InsufficientBalance.Eip | Your account does not have enough balance. | Your account balance is insufficient. Top up your account and try again. | diagnosis | |
| InsufficientEipCapacity | Insufficient EIP capacity to fulfill your request. | The EIP quota is insufficient. | diagnosis | |
| INSUFFICIENT_BALANCE | The account balance is insufficient. | diagnosis | ||
| InternalError | The request processing has failed due to some unknown error | An unknown error occurred. | diagnosis | |
| 400 | InternalError | The request processing has failed due to some unknown error. | The request processing failed due to an unknown error. | diagnosis |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. | diagnosis |
| 500 | InternalError | Internal system error. | An internal system error occurred. | diagnosis |
| 400 | INVAID.VBR.STATUS | VBR status must be active | The VBR status is invalid. | diagnosis |
| 400 | Invalid.Grant | Can not grant to other owner cen. | The VBR cannot be granted cross-account authorization to another CEN. | diagnosis |
| Invalid.natgwNotExist | The specified natgateway not exist. | The specified NAT gateway does not exist. | diagnosis | |
| 400 | Invalid.Status | The device or interface status invalid, or has been used.. | The Status parameter is invalid. | diagnosis |
| 400 | InvalidAccessKeyId.NotFound | Specified access key is not found. | The specified access key was not found. | diagnosis |
| InvalidAccessPoint.NotExist | The accessPoint not exit | The access point does not exist. | diagnosis | |
| InvalidAccessPoint.NotMatch | The accessPoint id is not matched | The specified ID of the access point is invalid. | diagnosis | |
| InvalidAccessPoint.ValueNotAllowed | The non-vbr router interface cannot have access point configured. | You cannot configure access points for the router interface of a vRouter. | diagnosis | |
| InvalidAccessPoint.ValueNotAllowed | The non-vbr opposite router interface cannot have opposite access point configured. | You cannot configure access points for the router interface of a non-VBR router. | diagnosis | |
| 400 | InvalidAccessPointId.NotEnabled | Invalid access point status. | The current access point does not have sufficient resources to support access. Contact your account manager. | diagnosis |
| InvalidAccessPointId.NotFound | The AccessPointId provided does not exist in our records. | AccessPointId is set to an invalid value. | diagnosis | |
| 400 | InvalidAccount.NotFound | The account is invalid. | The operation failed because an invalid caller account was used. | diagnosis |
| 400 | InvalidAction.Denied | Action is denied due to unfinished Eip configuration modification. | The operation was rejected because the EIP configuration modification has not been completed. | diagnosis |
| 400 | InvalidAliuid | Invalid Aliuid. | The Aliuid is invalid. | diagnosis |
| InvalidAllocationId.NotFound | Specified allocation id is not found. | The error message returned because the specified EIP does not exist. Check whether the value of the parameter is valid. | diagnosis | |
| InvalidAllocationId.NotFound | Specified allocation ID is not found.. | The specified EIP does not exist. Check whether the value of the parameter is valid. | diagnosis | |
| 404 | InvalidAllocationId.NotFound | Specified allocation ID is not found | The specified public IP address does not exist. Check whether the parameter you specified is correct. | diagnosis |
| InvalidAssociation.Duplicated | Specified instance already is associated. | An EIP or a GA instance is already associated with the specified instance. You must disassociate the EIP or GA instance from the specified instance before you can perform the operation. | diagnosis | |
| 400 | InvalidAttachment.NotFound | The attachment is not found. | The attachment does not exist. | diagnosis |
| 400 | InvalidAuthkey.Malformed | The specified BGP authentication key (%s) is malformed. | The BGP authentication key is invalid. | diagnosis |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | No resources are available in the current zone. | diagnosis |
| InvalidBackendServerId.NotFound | The specified BackendServerId is not found. | The backend server instance does not exist. | diagnosis | |
| InvalidBackendServerId.NotInVPC | The specified BackendServerId is not in VPC. | BackendServerId is not a VPC ID. | diagnosis | |
| InvalidBackendServerRegionId.EqualRegionId | The specified BackendServerRegionId can not be the same as RegionId. | You cannot specify the same value for BackendServerRegionId and RegionId. | diagnosis | |
| InvalidBackendServerRegionId.Mismatch | The specified BackendServerRegionId is not in the GlobalAccelerationInstance’s ServiceLocation. | The region specified by the BackendServerRegionId parameter does not belong to the service regions of the GA instance. | diagnosis | |
| InvalidBackendServerRegionId.NotFound | The specified BackendServerRegionId is not found. | The specified backend server region ID does not exist. | diagnosis | |
| InvalidBackendServerType.NotFound | The specified BackendServerType is not supported. | The specified backend server type is not supported. | diagnosis | |
| InvalidBandwidth | invalid physical connection banwidth. | The specified maximum bandwidth of the Express Connect circuit is invalid. | diagnosis | |
| 400 | InvalidBandwidth.NotEnough | bandwdith not enough. | The bandwidth package is insufficient. | diagnosis |
| 400 | InvalidBandwidth.NotEnough | Bandwidth not enough. | The bandwidth of the bandwidth plan is insufficient. | diagnosis |
| InvalidBandwidth.ValueNotSupported | The specified value of Bandwidth not supported. | The specified maximum bandwidth value is invalid. | diagnosis | |
| 400 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackageId does not exist in our records. | The specified bandwidth package ID does not exist. | diagnosis |
| 404 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackage resourceId does not exist in our records. | The specified Internet Shared Bandwidth instance does not exist. | diagnosis |
| 400 | InvalidBandwidthPackageIdNumber.NotSupported | The number of BandwidthPackageIds exceeds the limit. | The number of Internet Shared Bandwidth instances exceeds the quota limit. | diagnosis |
| InvalidBgpAuthkey.Malformed | Specified Bgp Group authkey is not valid. | The authentication key of the BGP group is invalid. | diagnosis | |
| InvalidBgpDescription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | diagnosis | |
| InvalidBgpDiscription.Malformed | Specified Bgp Group description is not valid. | The description of the BGP group is invalid. | diagnosis | |
| InvalidBgpGroup | bgp group not exists | The BGP group does not exist. | diagnosis | |
| 400 | InvalidBgpGroup.LocalAsn | VBR already attached to ECR, please delete it from ECR. | The Virtual Border Router is already associated with an Express Connect Router (ECR). You cannot modify the local AS number. To modify it, disassociate the ECR first. | diagnosis |
| 400 | InvalidBgpGroup.LocalAsnInvalid | The specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025. | The specified BgpGroup LocalAsn is invalid. Only values from 64512 to 65534 or from 420000000 to 429496729 are supported. | diagnosis |
| InvalidBgpName.Malformed | Specified Bgp Group name is not valid. | The name of the BGP group is invalid. | diagnosis | |
| InvalidBindingStatus | The eip binding status invalid. | The EIP is in an invalid state. | diagnosis | |
| InvalidChargeType.ValueNotSupported | The specified ChargeType is not supported. | The specified billing method is not supported. Specify a supported billing method. | diagnosis | |
| 400 | InvalidCidrBlock | Specified CIDR block is not valid. | Possible causes: 1. You are not in the whitelist for the 10.0.0.0/8 route CIDR block and cannot use this CIDR block. 2. The destination CIDR block of the custom route entry cannot be a subset of the CIDR block of any vSwitch in the same VPC. 3. Because 100.64.0.0/10 is a cloud service address, you cannot add this CIDR block to point to an on-premises data center. 4. In addition to 100.64.0.0/10, specific route CIDR blocks such as 100.64.0.0/11 and 100.96.0.0/11 cannot be used for on-premises data centers. | diagnosis |
| InvalidCidrBlock | Specified CIDR block is already exists. | The vSwitch CIDR block overlaps with another vSwitch CIDR block or with the destination CIDR block of a custom route entry. Try a different CIDR block that is not in use. | diagnosis | |
| InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | This CIDR block already exists in the routing table. | diagnosis | |
| InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | The format of the CIDR block is invalid. | diagnosis | |
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other subnets. | The vSwitch CIDR block overlaps with another vSwitch CIDR block or with the destination CIDR block of a custom route entry. Try a different CIDR block that is not in use. | diagnosis | |
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other entry. | The specified CIDR block overlaps the CIDR block of another VPC or a custom routing destination. Select a CIDR block that is not used. | diagnosis | |
| InvalidCircuitCode.Malformed | The specified CircuitCode is not valid. | CircuitCode is set to an invalid value. | diagnosis | |
| InvalidCircuitCode.Malformed | circuitCode is illegal. | The error message returned because CircuitCode is set to an invalid value. | diagnosis | |
| 400 | InvalidCirdrBlock.MaskLength | Specified CIDR block is not valid . | The CIDR block format is incorrect. | diagnosis |
| 400 | InvalidClientIpPool.Conflict | The specified client IP pool conflicts with other resources in the same VPC. | The client CIDR block conflicts with other resources in the VPC. | diagnosis |
| 400 | InvalidCommodity.NotFound | Commodity is not exist. | The commodity does not exist. | diagnosis |
| 404 | InvalidCustomerGatewayInstanceId.NotFound | The specified customer gateway instance id does not exist. | The specified customer gateway instance does not exist. Check whether the customer gateway instance ID is correct. | diagnosis |
| InvalidDescription | The description is not valid | The format of the description is invalid. | diagnosis | |
| 400 | InvalidDescription.Malformed | The Description is illeagl. | The specified resource description format is invalid. The description must be 2 to 256 characters in length and cannot start with http:// or https://. | diagnosis |
| InvalidDescription.Malformed | The specifid ‘Description’ is not valid. | The format of the description is invalid. | diagnosis | |
| InvalidDescription.Malformed | The specifid "Description" is not valid. | The source description can be 2 to 256 characters in length. It cannot start with http:// and https://. | diagnosis | |
| 400 | InvalidDescription.Malformed | The specifid ?Description? is not valid. | The specified resource description format is invalid. The description must be 2 to 256 characters in length and cannot start with http:// or https://. | diagnosis |
| 400 | InvalidDescription.Malformed | The Description is illegal. | The specified resource description format is invalid. The description must be 2 to 256 characters in length and cannot start with http:// or https://. | diagnosis |
| 400 | InvalidDescription.Malformed | The specifid Description is not valid. | The value of the Description parameter is invalid. | diagnosis |
| 400 | InvalidDescription.Malformed | The specified Description is wrongly formed. | The Description parameter is invalid. | diagnosis |
| 400 | InvalidDescription.Malformed | The specified Description is not valid. | The value of the Description parameter is invalid. | diagnosis |
| 400 | InvalidDescription.Malformed | The specified "Description" is not valid. | The description must be 2 to 256 characters in length and cannot start with http:// or https://. | diagnosis |
| 404 | InvalidDeviceName.NotFound | DeviceName is not found. | The specified device does not exist. | diagnosis |
| 400 | InvalidDhcpOptionsSetId.NotFound | The specified dhcpOptionsSetId does not exist. | The DHCP options set instance does not exist. Check whether the parameter is correct. | diagnosis |
| 400 | InvalidDomainNameServers.Malformed | The specified format of DomainNameServers is invalid. | The format of the specified DomainNameServers parameter is incorrect. Check whether the parameter is correct. | diagnosis |
| 400 | InvalidEIPStatus.BizDisabled | The EIP has been locked. | The EIP instance is locked. | diagnosis |
| InvalidEndTime.Malformed | Specified end time is malformed. | EndTime is set to an invalid value. | diagnosis | |
| InvalidEndTime.Malformed | The specified parameter "EndTime" is not valid. | EndTime is set to an invalid value. | diagnosis | |
| 400 | InvalidEniType.SlaveEni | The eni type cannot be slave eni. | The network interface type cannot be a secondary network interface. | diagnosis |
| InvalidEntryRuleQuota.NotFound | Route entry quota rule not exists. | The quota rules of route entries do not exist. | diagnosis | |
| InvalidExternalIp.Malformed | The specified ExternalIp is not a valid IP address. | The specified EIP is invalid. | diagnosis | |
| InvalidExternalIp.NotFound | Specified External Ip address does not found on the VRouter | The specified EIP does not exist. | diagnosis | |
| InvalidExternalPort.Malformed | The specified ExternalPort is not a valid port. | The specified public port is invalid. | diagnosis | |
| InvalidFilterKey.NotFound | The specified filter key is invalid. | diagnosis | ||
| 404 | InvalidFilterKey.ValueNotSupported | Specified filter key is not supported: Filter.X.key | The key of the filter is not supported: Filter.X.key. | diagnosis |
| InvalidFilterValue | The specified filter value is invalid. | diagnosis | ||
| InvalidForwardEntryId.NotFound | Specified forward entry ID does not exist | The specified DNAT entry does not exist. | diagnosis | |
| InvalidForwardTableId.NotFound | Specified forward table does not exist. | The specified DNAT table does not exist. Check the parameter and try again. | diagnosis | |
| InvalidForwardTableId.NotFound | Specified forwardTableId does not exist | The specified DNAT table does not exist. Check the parameter and try again. | diagnosis | |
| InvalidGlobalAccelerationInstanceDescription.Malformed | The specified Description is not valid. | The description format is invalid. | diagnosis | |
| InvalidGlobalAccelerationInstanceId.NotFound | The specified GlobalAccelerationInstanceId is not found. | The GA instance does not exist. | diagnosis | |
| InvalidGlobalAccelerationInstanceName.Malformed | The specified Name is not valid. | The name format is invalid. | diagnosis | |
| InvalidHaVip.NotFound | The specified HaVip does not exist. | This HAVIP does not exist. | diagnosis | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified region. | The specified HaVip is not in the specified region. Check whether the selected region is correct. | diagnosis |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified VPC. | The specified HaVip does not exist in the VPC. | diagnosis |
| 400 | InvalidIAssociatedInstanceType.ValueNotSupported | The specified value of AssociatedInstanceType is not supported. | The value of AssociatedInstanceType is invalid. Check whether this parameter is correct. | diagnosis |
| 404 | InvalidIDaaSApplicationId.NotFound | The specified IDaaS application Id does not exist. | The specified IDaaS application instance ID does not exist. | diagnosis |
| 404 | InvalidIDaaSInstanceId.NotFound | The specified IDaaS instance ID does not exist. | The specified IDaaS instance ID does not exist. | diagnosis |
| InvalidIdempotenceParameter.Mismatch | The specified parameters are different from before. | This client token is different from the previous one. | diagnosis | |
| 400 | InvalidInstance.NotBelong | The instance to be associated with does not belong to your account. | The bindable instance does not belong to your account. | diagnosis |
| 400 | InvalidInstance.NotExist | The bound instance does not exist. | The bindable instance does not exist. | diagnosis |
| 404 | InvalidInstance.NotFound | The specified Instance does not exist in the specified region. | The specified instance does not exist in the current region. | diagnosis |
| InvalidInstance.StatusError | The router instance owener error. | The instance is in an invalid state. | diagnosis | |
| 400 | InvalidInstance.StatusError | The router instance status error. | The instance status is invalid. | diagnosis |
| 400 | InvalidInstanceId | vswitch does not exist. | The vSwitch instance does not exist. | diagnosis |
| 400 | InvalidInstanceId | Instance does not exist. | The instance does not exist. | diagnosis |
| 400 | InvalidInstanceId | VPC does not exists. | The VPC-connected instance does not exist. | diagnosis |
| 400 | InvalidInstanceId | NetworkInterface does not exist. | The ENI instance does not exist. | diagnosis |
| InvalidInstanceId.NotFound | The specified Instance does not exist in the specified region. | The instance does not exist in the region. | diagnosis | |
| InvalidInstanceId.NotFound | Specified instance does not exist. | The instance does not exist. Check the instance ID. | diagnosis | |
| InvalidInstanceId.NotFound | The InstanceId provided does not exist in our records. | The ECS instance does not exist in the VPC. | diagnosis | |
| 400 | InvalidInstanceId.NotFound | The InstanceId is not found. | The instance specified by InstanceId cannot be found. | diagnosis |
| 400 | InvalidInstanceId.NotFound | The InstanceId provided does not exist. | The specified instance does not exist. | diagnosis |
| 400 | InvalidInstanceId.NotFound | InstanceId not found. | The InstanceId parameter is invalid. | diagnosis |
| 400 | InvalidInstanceId.NotFound | [%s] | The Express Connect circuit instance [%s] does not exist. | diagnosis |
| 400 | InvalidInstanceId.NotFound | InstanceId is not found. | The Express Connect circuit instance ID does not exist. | diagnosis |
| 400 | InvalidInstanceId.NotFound | The specified instance id does not exist. | The specified instance ID does not exist. | diagnosis |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | The instance ID cannot be found. | diagnosis |
| InvalidInstanceOwner.Error | The router instance owener error. | The VRouter does belong to your account. | diagnosis | |
| 400 | InvalidInstanceOwner.Error | The router instance owner error. | The instance owner is invalid. | diagnosis |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | The instance type cannot be found. | diagnosis |
| InvalidInstanceType.ValueNotSupported | The specified value of InstanceType is not supported. | InstanceType is set to an invalid value. | diagnosis | |
| InvalidInstanId.NotFound | Specified instance does not exist. | The specified instance does not exist. | diagnosis | |
| InvalidInternalIp.Malformed | The specified InternalIp is not a valid IP address. | The specified destination private IP address is invalid. | diagnosis | |
| InvalidInternalPort.Malformed | The specified InternalPort is not a valid port. | The specified private port is invalid. | diagnosis | |
| InvalidIp.Malformed | The specified ip address is not valid. | The specified private IP address is invalid. | diagnosis | |
| InvalidIP.Malformed | Ip malformed. | The format of the IP address is invalid. | diagnosis | |
| InvalidIp.NotInNatgw | The specified Ip not belong to natgateway. | The specified EIP is not associated with the NAT gateway. | diagnosis | |
| 400 | InvalidIp.NotSameSubnet | Local gateway ip and peer gateway ip are not in the same subnet. | The local gateway IP address and the peer gateway IP address are not in the same subnet. | diagnosis |
| 400 | InvalidIpAddress.AlreadyExist | Specified IpAddress is already exist. | The IP address already exists. The same IP address cannot be used more than once by the same user in the same region. | diagnosis |
| 400 | InvalidIPAddress.AlreadyInUse | The specified IPAddress is already used by other resource. | The specified IP address is already in use by another resource. | diagnosis |
| InvalidIPAddress.AlreadyUsed | The specified IPAddress is already used by other resource. | The specified IP address is in use. | diagnosis | |
| 400 | InvalidIPAddress.Malformed | The specified IPAddress is not a valid or strict address. | The specified IP address is invalid. | diagnosis |
| InvalidIPAddress.NotAvailable | The specified IPAddress is not available because it is a system reserved IPAddress. | The specified IP address is reserved by the system and cannot be used. | diagnosis | |
| InvalidIPAddress.OutOfRange | The specified IPAddress is out of VSwitch CIDR. | The private IP address does not fall within the vSwitch CIDR block. | diagnosis | |
| 400 | InvalidIPAddress.OutOfVswCIDR | The specified IPAddress is out of VSwitch CIDR. | The specified IP address is outside the CIDR block of the virtual switch (vSwitch). | diagnosis |
| InvalidIpAddress.WrongFormat | Specified IpAddress is invalid. | The specified IP address is invalid. | diagnosis | |
| InvalidIpCount.ValueNotSupported | The specified value of IpCount not supported. | IpCount is set to an invalid value. | diagnosis | |
| InvalidIpCount.ValueNotSupported | Can not remove all ips of the bandwidthPackage. | You cannot remove all IP addresses from the bandwidth plan. | diagnosis | |
| InvalidIpInstanceId.NotFound | The specified EIP does not exist. | diagnosis | ||
| 400 | InvalidIpInstanceId.NotFound | The specified Eip InstanceId does not exist in our records. | The specified EIP instance does not exist. | diagnosis |
| 400 | InvalidIpv6AddressId.NotFound | The specified resource of %s is not found. | The specified Ipv6InstanceId does not exist. Check whether your input is correct. | diagnosis |
| 400 | InvalidIpv6CidrBlock.Malformed | Param Ipv6CidrBlock is malformed. | The specified IPv6 CIDR block is invalid. | diagnosis |
| 400 | InvalidIpv6CidrBlock.NotFound | The specified IPv6CidrBlock was not found. | The specified IPv6CidrBlock was not found. | diagnosis |
| 400 | InvalidIpv6Gateway.NotFound | The specified IPv6 gateway was not found. | The specified IPv6 gateway was not found. | diagnosis |
| 400 | InvalidIpv6GatewayId.NotFound | The specified IPv6GatewayId was not found. | The specified IPv6GatewayId was not found. | diagnosis |
| 400 | InvalidIpv6Instance.NotFound | The specified resource of InvalidIpv6Instance is not found. | The specified Ipv6Instance resource was not found. | diagnosis |
| 404 | InvalidIpv6Instance.NotFound | The specified Ipv6AddressId or Ipv6InternetBandwidthId is not found. | The specified Ipv6AddressId or Ipv6InternetBandwidthId does not exist. | diagnosis |
| 400 | InvalidIpv6Instance.NotFound | The specified IPv6Instance was not found. | The specified IPv6 instance was not found. | diagnosis |
| 400 | InvalidIpv6ULACidrBlock.Malformed | The specified IPv6ULACidrBlock is malformed. | The format of the specified IPv6ULACidrBlock is invalid. | diagnosis |
| InvalidLineOperator.Malformd | The LineOperator provided was invalid. | The value of the LineOperator parameter is invalid. | diagnosis | |
| 400 | InvalidLoadBalancerId.NotFound | The specified resource of load balancer is not found. | The specified SLB instance does not exist. | diagnosis |
| 400 | InvalidLoadBalancerId.NotFound | LoadBalancerId does not exist. | The specified load balancing ID does not exist. | diagnosis |
| 400 | InvalidLocalBgpIp.Malformed | The specified LocalBgpIp is malformed. | The specified local BGP IP address is invalid. | diagnosis |
| InvalidLocalGatewayIp.Malformed | The specified LocalGatewayIp is not valid. | The IP address of the local gateway is invalid. | diagnosis | |
| InvalidLockReason.NotFound | The specified LockReason is not found | The reason why the instance is locked is unknown. | diagnosis | |
| InvalidName | The name is not valid | The name format is invalid. | diagnosis | |
| InvalidName.Malformd | The attribute name is illeagl. | Invalid name format. | diagnosis | |
| 400 | InvalidName.Malformd | The attribute name is illegal. | The attribute name is invalid. | diagnosis |
| InvalidName.Malformed | The specified ‘Name’ is not valid. | The name format is invalid. | diagnosis | |
| InvalidName.Malformed | The specified "Name" is not valid. | The name format is invalid. | diagnosis | |
| InvalidName.Malformed | The specified ?Name? is not valid. | The error message returned because the name format is invalid. | diagnosis | |
| 400 | InvalidName.Malformed | The attribute name is illegal. | The name format is invalid. | diagnosis |
| 400 | InvalidName.Malformed | The specified Name is not valid. | The value of the Name parameter is invalid. | diagnosis |
| InvalidNatGatewayDescription.MalFormed | NatGateway description is not valid. | The gateway description is invalid. | diagnosis | |
| InvalidNatGatewayId.NotFound | The NatGatewayId not exist. | The value of the NatGatewayId parameter is invalid. | diagnosis | |
| InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist in our records. | The value of the NatGatewayId parameter is invalid. | diagnosis | |
| InvalidNatGatewayName.MalFormed | NatGateway name is not valid. | The gateway name is invalid. | diagnosis | |
| 400 | InvalidNetworkAcl.NotFound | The special Network Acl is not found. | The specified network ACL was not found. | diagnosis |
| 400 | InvalidNetworkInterface.NotFound | The network interface is not found on the attachment. | The elastic network interface controller (NIC) on the attachment does not exist. | diagnosis |
| 400 | InvalidNetworkInterface.NotFound | The specified network interface does not exist. | The next hop instance ID for the specified ENI type does not exist. | diagnosis |
| 400 | InvalidNetworkInterfaceId.NotFound | The network interface is not found. | The ENI does not exist. | diagnosis |
| InvalidNextHop | Specified nexthop and nexthop list cannot both null. | The next hop and next hop list cannot be empty at the same time. | diagnosis | |
| InvalidNexthop | The Specified nexthop illage. | The next hop ID does not exist. | diagnosis | |
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | A pass-through ENI cannot be used as a next hop. | diagnosis |
| InvalidNextHop.NotFound | Specified next hop does not exist. | The specified next hop does not exist. | diagnosis | |
| 400 | InvalidNextHop.NotFound | The specified NextHop does not exist. | The next hop specified in the route does not exist. | diagnosis |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | The service type of the ENI used as the route next hop is invalid. | diagnosis |
| 400 | InvalidNexthop.zhuhao | The specified nexthop is illegal. | The next hop that the route points to is invalid. | diagnosis |
| InvalidNextHopId.NotFound | Specified next hop does not exist. | The next hop does not exist. | diagnosis | |
| 400 | InvalidNextHopList.Size | Has more than one nexthop. | The route has multiple next hops. | diagnosis |
| 400 | InvalidNexthopListSize | nexthop size is illegal. Must be between 2 and 4. | You must specify 2 to 4 router interfaces as next hops. | diagnosis |
| InvalidNextHopType | Specified parameter "NextHopType" is not valid | The specified next hop type is invalid. | diagnosis | |
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | The NextHopType parameter is invalid. | diagnosis |
| InvalidNexthopTypeAndList.BothNotNull | both nexthopType and nextHopList are not null. | You cannot leave both NextHopType and NextHopList empty. | diagnosis | |
| InvalidNexthopTypeAndList.BothNull | both nexthopType and nextHopList are null. | NextHopType and NextHopList are not specified. | diagnosis | |
| 400 | InvalidNicOrVm.NotFound | Bind nic or vm not exist. | The specified ENI or VM to bindwith does not exist. | diagnosis |
| 400 | Invalidnull.NotFound | %s [%s] is not found. | The specified resource instance does not exist. | diagnosis |
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state | The status of the VBR interface does not support this operation. | diagnosis | |
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state. | The specified VBR is in an invalid state. Check the status of the VBR. | diagnosis | |
| 400 | InvalidOperation.OrderOpened | You have already open the service. Go to the console to start using it. | The outbound traffic service has already been activated. Use it in the console. | diagnosis |
| InvalidOperation.RouterInterfaceNotDeleted | The specified VirutalBorderRouter still has routerInterface. | The VBR is associated with a router interface. | diagnosis | |
| 400 | InvalidOpposite.NotFound | The opposite does not exist. | The peer does not exist. | diagnosis |
| 400 | InvalidOpposite.NotFound | The opposite does not exit. | The peer does not exist. | diagnosis |
| InvalidOppositeRegionId.NotFound | The oppositeRegionId provided does not exist in our records. | The peer region does not exist. | diagnosis | |
| InvalidOppositeRouterType | nexthop list cannot only contain router interface whose opposite router interface is on vbr. | The specified next hop is invalid. The peer router of the router interface that you specify as the next hop must be a VBR. | diagnosis | |
| 400 | InvalidOppositeRouterType.ValueNotSupported | The specified OppositeRouterType is not valid. | The value of the OppositeRouterType parameter is invalid. | diagnosis |
| InvalidParam | The Ecmp routerEntry with router interfaces local vgw vip not match. | The Ecmp routerEntry with router interfaces local vgw vip not match. | diagnosis | |
| 400 | InvalidParam | The routerEntry input param is illegal. | The input parameters for modifying the route are invalid. | diagnosis |
| 400 | InvalidParam.AvailableZoneId | The specified AvailableZoneId did not retrieve the corresponding cluster IP address. | No cluster IP address was obtained for the specified AvailableZoneId. | diagnosis |
| 400 | InvalidParam.CloudInstanceType | invalid cloud instance type | The cloud service type is invalid. | diagnosis |
| InvalidParam.ModifyRouterInterface | Modify routerinterface param invalide | A parameter that you set to modify the router interface is invalid. | diagnosis | |
| 400 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalid | The parameters for editing the router interface are invalid. | diagnosis |
| InvalidParam.NotFound | Parameter must not be null | A required parameter is not specified. | diagnosis | |
| 400 | InvalidParam.NotFound | Parameter must not be null,uid, bid,regionNo, remoteRegionNo, routerId or accessPointId | The parameter cannot be null. | diagnosis |
| 400 | InvalidParam.NotFound | Parameters such as uid, bid, regionNo, remoteRegionNo or routerId cannot be null. | The uid, bid, regionNo, remoteRegionNo, and routerId parameters cannot be empty. | diagnosis |
| InvalidParam.NotNull | The parameter must not be null. | A required parameter is not specified. | diagnosis | |
| 400 | InvalidParam.NotNull | SnatTableId and natGatewayId can not both be null | SnatTableId and natGatewayId cannot both be empty. | diagnosis |
| 400 | InvalidParam.NotNull | FullnatTableId and natGatewayId can not both be null | FullnatTableId and natGateway cannot both be empty. | diagnosis |
| 400 | InvalidParam.NotNull | ForwardTableId and natGatewayId can not both be null | ForwardTableId and natGatewayId cannot both be empty. | diagnosis |
| 400 | InvalidParameter | The parameter is invalid. | The parameter is invalid. | diagnosis |
| InvalidParameter | Specified CIDR block is not valid | The specified CIDR block is invalid. | diagnosis | |
| InvalidParameter | Specified CIDR block is not valid in VPC. | The CIDR block does not fall within the VPC CIDR block. | diagnosis | |
| InvalidParameter | Specified value of "Bandwidth" is not supported. | The specified bandwidth value is invalid. | diagnosis | |
| InvalidParameter | Specified UserCidr Subnet mask is not valid . | The subnet mask of the user CIDR block is invalid. | diagnosis | |
| InvalidParameter | Specified UserCidr invalid format. | The format of the user CIDR block is invalid. | diagnosis | |
| InvalidParameter | The specified parameter is not valid. | The parameter is set to an invalid value. | diagnosis | |
| InvalidParameter | Specified value of "Period" is not valid | Period is set to an invalid value. | diagnosis | |
| InvalidParameter | The specified parameter is not valid | The parameter is set to an invalid value. | diagnosis | |
| 400 | InvalidParameter | Specified value of InternetChargeType is not valid. | The value of the InternetChargeType parameter is invalid. | diagnosis |
| InvalidParameter | Specified value of "Bandwidth" is not valid. | The specified bandwidth value is invalid. | diagnosis | |
| InvalidParameter.Bandwidth | The specified bandwidth value is invalid. | diagnosis | ||
| InvalidParameter.BandwidthPackage.n.ISP.ValueNotSupport | The specified ISP of BandwidthPackage is not valid. | The specified ISP of the EIP bandwidth plan is invalid. | diagnosis | |
| 400 | InvalidParameter.BgpConfig | The specified BgpConfig is invalid. | The specified BGP configuration is invalid. | diagnosis |
| InvalidParameter.Description.Malformed | The specified Description is not valid. | The specified description is invalid. | diagnosis | |
| 400 | InvalidParameter.EniInstanceId | The specified EniInstanceId is invalid. | The specified EniInstanceId is invalid. | diagnosis |
| InvalidParameter.Mismatch | Specified elastic IP address and ECS instance are not in the same region. | The EIP and ECS instance do not belong to the same region. | diagnosis | |
| InvalidParameter.Name.Malformed | The specified Name is not valid. | The specified name format is invalid. Enter the name in the valid format. | diagnosis | |
| 400 | InvalidParameter.RegionId | The EIP must be the same as the region of the bound instance. | The EIP and the associated instance must be in the same region. | diagnosis |
| InvalidParameter.Spec.ValueNotSupported | The specified Spec is not valid. | The specification is invalid. | diagnosis | |
| 400 | InvalidParameter.TagKey | The specified parameter TagKey is invalid. | The specified TagKey parameter is invalid. | diagnosis |
| 400 | InvalidParameter.TagValue | The specified parameter TagValue is invalid. | The specified TagValue parameter is invalid. | diagnosis |
| 400 | InvalidParameter.TooMany | monitor parameter too many data required. | Multiple invalid parameters exist. | diagnosis |
| 400 | InvalidParameter.VpnConnectionName | The specified vpn connection name is invalid. | The specified VPN connection name is invalid. | diagnosis |
| 400 | InvalidParams.AlreadyExists | bgp network already exists | The Border Gateway Protocol (BGP) networks already exists. | diagnosis |
| InvalidParams.NotFound | instance not found | The specified instance does not exist. | diagnosis | |
| 400 | InvalidParams.NotFound | vpc instance not found | The VPC does not exist. Check whether the specified VPC is correct. | diagnosis |
| InvalidParams.NotNull | parameter must not null. | A required parameter is not specified. | diagnosis | |
| InvalidParams.NotNull | invalid peer asn cannot equals aliyun asn:45104 | The AS number cannot be the same as the AS number on the Alibaba Cloud side. | diagnosis | |
| 400 | InvalidParams.NotNull | The parameter must not be null, name or description or icmpReplyEnabled | The name, description, and ICMP echo reply enable parameters cannot all be empty. | diagnosis |
| 400 | InvalidParams.NotNull | params must not null. | The parameter cannot be empty. | diagnosis |
| InvalidParams.PeerIpAddressInUse | peer ip address in use | The peer IP address is in use. | diagnosis | |
| 400 | InvalidParams.PeerIpAddressInUse | peer ip address in use ,cannot create bgp peer. | The peer IP address is in use. The BGP peer cannot be created. | diagnosis |
| InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif | The VBR must have at least one subinterface to create a BGP. | diagnosis | |
| 400 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif ,point out peerIpAddress. | Specify the PeerIpAddress. | diagnosis |
| InvalidPeerAsn.Malformed | invalid peer asn cannot equals aliyun asn:45104 | The AS number cannot be the same as the AS number on the Alibaba Cloud side. | diagnosis | |
| InvalidPeerGatewayIp.Malformed | The specified PeerGatewayIp is not valid. | PeerGatewayIp is set to an invalid value. | diagnosis | |
| 400 | InvalidPeeringSubnetMask.Malformed | The specified PeeringSubnetMask is not valid. | The specified PeeringSubnetMask is invalid. Check whether this parameter is correct. | diagnosis |
| InvalidPeerIpAddress | multi pconn peer ip can not be null. | The IP addresses of multiple Express Connect circuits cannot be empty. | diagnosis | |
| InvalidPeerLocation.Malformd | The PeerLocation provided was invalid. | PeerLocation is set to an invalid value. | diagnosis | |
| InvalidPeriod.ValueNotSupported | The specified parameter "Period" is not valid. | Period is set to an invalid value. | diagnosis | |
| 400 | InvalidPhoneNum.Malformed | The parameter PhoneNum is invalid. | The PhoneNum parameter is invalid. | diagnosis |
| 400 | InvalidPhysicalConnectionBandwidth.Malformed | Specified PhysicalConnection Bandwidth is not valid. | The bandwidth value bound to the Express Connect circuit is invalid. | diagnosis |
| InvalidPhysicalConnectionBusinessStatus | invalid physical connection business status. | The Express Connect circuit is in an invalid state. | diagnosis | |
| 400 | InvalidPhysicalConnectionChargeType.Malformed | Specified Physical Connection ChargeType is not valid. | The InstanceChargeType parameter is invalid. | diagnosis |
| InvalidPhysicalConnectionId.NotEnabled | The specified PhysicalConnectionId is not in Enabled state. | The Express Connect circuit is in an invalid state. Check the Express Connect circuit and try again. | diagnosis | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId is not found. | The specified Express Connect circuit ID does not exist. | diagnosis |
| InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId does not belong to user. | The specified physical connection does not belong to your account. | diagnosis | |
| InvalidPhysicalConnectionId.NotFound | The PhysicalConnectionId provided does not exist in our records. | The Express Connect circuit does not exist. | diagnosis | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found. | No Express Connect circuit was found for the specified circuit ID. | diagnosis |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found | The PhysicalConnectionId parameter is invalid. | diagnosis |
| InvalidPhysicalConnectionId.NotMatched | instance id not matched. | The instance ID does not match. | diagnosis | |
| 400 | InvalidPhysicalConnectionOperator.Malformed | Specified PhysicalConnection Operator is not valid. | The operation on the Express Connect circuit is invalid. | diagnosis |
| 400 | InvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | diagnosis |
| 400 | InvalidPhysicalConnectionPortType.Malformed | Specified PhysicalConnection PortType is not valid. | The port type of the Express Connect circuit is invalid. | diagnosis |
| 400 | InvalidPolicy.WrongFormat | Invalid input policy format. | The input policy information format is incorrect. | diagnosis |
| InvalidPortType.Malformd | The PortType provided was invalid. | The specified port type is invalid. | diagnosis | |
| 400 | InvalidPortType.NotFound | Specified port type is not found. | The specified port type is out of stock. | diagnosis |
| 404 | InvalidPortType.NotFound | There are no resources with the portType. | The specified port type does not exist. | diagnosis |
| 400 | InvalidPrice.NotFound | Pricing plan result not found. | The Price parameter is invalid. | diagnosis |
| InvalidProtocal.ValueNotSupported | The specified IpProtocol does not support. | The specified protocol is not supported. | diagnosis | |
| InvalidRedundantPhysicalConnection | redundant physical connection doesn't belong to current user. | The specified redundant Express Connect circuit does not belong to your Alibaba Cloud account. | diagnosis | |
| InvalidRedundantPhysicalConnectionId.NotFound | The RedundantPhysicalConnectionId does not found. | The specified redundant Express Connect circuit does not exist. | diagnosis | |
| InvalidRedundantPhysicalConnectionStatus | invalid redundant physical connection status. | The redundant Express Connect circuit is in an invalid state. | diagnosis | |
| InvalidRegion.NotSupport | The specified region does not support. | The specified region does not support. | diagnosis | |
| InvalidRegionId.NotFound | The specified region not found. | RegionId is set to an invalid value. Check whether the service is available in the specified region and try again. | diagnosis | |
| InvalidRegionId.NotFound | Specified value of "regionId" is not supported. | RegionId is set to an invalid value. Check whether the service is available in the specified region and try again. | diagnosis | |
| 404 | InvalidRegionId.NotFound | The specified RegionId is not found. | The specified RegionId does not exist. Check whether the product is available in this region. | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist in our records. | The specified RegionId does not exist. | diagnosis |
| InvalidRegionId.NotFound | The parameter wrong | The parameter value is invalid. | diagnosis | |
| InvalidRegionId.NotFound | The specified region ID is invalid. | diagnosis | ||
| 404 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | The specified RegionId does not exist. Check whether this parameter is correct. | diagnosis |
| 404 | InvalidRegionId.NotFound | The specified RegionId does not exist. | The specified region does not exist. Check whether this parameter is correct. | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified region is not found. | The specified region does not exist. | diagnosis |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in ec region list. | The provided regionId is invalid. Check the value. | diagnosis |
| 404 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | The parameter is invalid. | diagnosis |
| 404 | InvalidRegionId.NotFound | The specified region is not found during access authentication. | The specified region was not found during access authentication. | diagnosis |
| 404 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | The specified RegionId does not exist. | diagnosis |
| InvalidRegionId.NotSupport | The RegionId provided does not support in our records. | The specified region ID is invalid. | diagnosis | |
| InvalidRegionPair.NotReachable | The specified OppositeRegion is not reachable by ExpressConnect from that region specified by "RegionId" | The specified region ID is invalid. | diagnosis | |
| invalidRemovedIpAddresses.NotFound | Some of the specified value of RemovedIpAddress not found in specified BandwidthPackage. | An EIP in the EIP list is not associated with the EIP bandwidth plan. Check the EIP list. | diagnosis | |
| InvalidRemovedIpAddresses.NotFound | Some of remove ip is not natPublicIp. | One or more public IP addresses to be removed are not associated with the NAT gateway. | diagnosis | |
| 400 | InvalidReservationTime.Malformed | The parameter ReservationTime is invalid. | The ReservationTime parameter is invalid. | diagnosis |
| 400 | InvalidResource.BindingExist | The binding instance has been binded. | The instance to be associated is already in the associated state. | diagnosis |
| 400 | InvalidResourceGroupId | The specified ResourceGroupId does not exist. | The resource group ID does not exist. | diagnosis |
| 400 | InvalidResourceId.NotFound | This resourceId already has flowlog instance existed. | A flow log instance already exists for the specified resource. | diagnosis |
| 404 | InvalidResourceId.NotFound | The specified ResourceId does not exist. | The specified resource ID does not exist. | diagnosis |
| InvalidRole.ValueNotSupported | The specified Role is not valid. | The specified role is invalid. | diagnosis | |
| InvalidRouteEntry | Specified routeEntry not exist. | The specified route entry does not exist. | diagnosis | |
| InvalidRouteEntry.Duplicate | The route entry already exist. | The specified route entry already exists. | diagnosis | |
| InvalidRouteEntry.NotFound | Route entry not exists. | The route entry does not exist. | diagnosis | |
| 400 | InvalidRouteEntry.NotFound | The specified route entry does not exist. | The specified route entry does not exist. | diagnosis |
| 400 | InvalidRouteEntryId.NotFound | The specified routeEntry does not exist. | The specified route entry does not exist. | diagnosis |
| 400 | InvalidRouteEntryId.NotFound | Specified RouteEntryId does not exist. | The specified route entry was not found. | diagnosis |
| 404 | InvalidRouteEntryId.NotFound | The specified resource of is not found. | The specified route entry does not exist. | diagnosis |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | The modification failed because the specified route entry name is invalid. | diagnosis |
| 400 | InvalidRouteEntrySize | The Specified routerEntry size not legal. | Equal-cost multi-path (ECMP) routing requires 2 to 4 router interfaces as the next hops. | diagnosis |
| 404 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | The router interface cannot be attached to CEN. | diagnosis |
| InvalidRouterId.NotFound | The specified RouterId does not exist in our recored. | The specified router ID does not exist. | diagnosis | |
| 400 | InvalidRouterId.NotFound | Param is not valid,this user does not have this router or aliuid bid regionNo and routerId must have something wrong. | The RouterId parameter is invalid. | diagnosis |
| InvalidRouterInterface | invalid router interface. | The specified router interface does not exist. | diagnosis | |
| InvalidRouterInterfaceChargeType.Malformed | The prepaid routerinterface can not delete. | You cannot delete a subscription router interface. | diagnosis | |
| 400 | InvalidRouterInterfaceChargeType.Malformed | Specified RouterInterface ChargeType is not valid. | The specified RouterInterface ChargeType is invalid. | diagnosis |
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our records. | The specified router interface does not exist. | diagnosis | |
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our record. | The specified router interface does not exist. | diagnosis | |
| 400 | InvalidRouterInterfaceId.NotFound | The specified RouterInterface does not exist in our record. | The specified RouterInterface instance does not exist. | diagnosis |
| 400 | InvalidRouterInterfaceSpec.Malformed | Specified RouterInterface spec is not valid. | The specified RouterInterface Spec is invalid. | diagnosis |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | The specified next hop does not exist in the VBR route table. | diagnosis |
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid. | The router type is invalid. | diagnosis | |
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid | The router type is invalid. | diagnosis | |
| 400 | InvalidRouteTable.NotFound | The specified routetable does not exist. | The route table instance does not exist. | diagnosis |
| 400 | InvalidRouteTable.NotFound | The specified RouteTable was not found. | The specified route table was not found. | diagnosis |
| InvalidRouteTableId.NotFound | Specified route table does not exist. | The specified route table does not exist. | diagnosis | |
| 400 | InvalidSecondaryCidrBlock.NotFound | SecondaryCidrBlock [%s] is not found. | The secondary CIDR block to be deleted cannot be found. | diagnosis |
| 400 | InvalidSecondaryCidrBlock.NotFound | The specified SecondaryCidrBlock was not found. | The specified secondary CIDR block is not found. | diagnosis |
| InvalidServiceLocation.Mismatch | The specified ServiceLocation does not match the region. | The specified service region does not match the current region. | diagnosis | |
| InvalidServiceLocation.ValueNotSupported | The specified ServiceLocation is not supported. | The specified service region is not supported. | diagnosis | |
| InvalidSnatEntryId.NotFound | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. Check whether the SNAT entry is valid. | diagnosis | |
| InvalidSnatEntryId.NotFound | Specified Snat entry ID does not exist | The specified SNAT entry does not exist. Check whether the SNAT entry is valid. | diagnosis | |
| InvalidSnatIp.Malformed | The specified SnatIp is not a valid IP address. | The specified EIP is invalid. | diagnosis | |
| InvalidSnatIp.NotFound | Specified SnatIp does not found on the NAT Gateway | The public IP address does not exist in the NAT gateway. | diagnosis | |
| InvalidSnatTableId.NotFound | Specified SNAT table does not exist. | The specified SNAT table does not exist. | diagnosis | |
| InvalidSpec.ValudNotSupported | The specified Spec is not supported. | The specification does not support this operation. Change the specification and try again. | diagnosis | |
| 400 | InvalidSpec.ValueNotSupported | The specified Spec is not supported. | The router interface specification is invalid. | diagnosis |
| 400 | InvalidSslVpnServerCertId.NotFound | The parameter is incorrect. The corresponding SSL VPN server certificate cannot be found. | The parameter is incorrect. The certificate of the corresponding SSL-VPN server is not found. | diagnosis |
| InvalidStartTime.Malformed | The specified parameter "StartTime" is not valid. | The start time is invalid. | diagnosis | |
| InvalidStartTime.Malformed | Specified start time is malformed. | The start time is invalid. | diagnosis | |
| InvalidStartTime.TooEarly | The specified parameter "StartTime" is too early. | The start time is invalid. | diagnosis | |
| InvalidStatus | invalid physical connection status. | The Express Connect circuit is in an invalid state. | diagnosis | |
| 400 | InvalidStatus | RouterInterface can be operated by this action only when the status is Active,Idle or Inactive. | This operation is allowed only when the router interface is in the Active, Idle, or Inactive state. | diagnosis |
| InvalidStatus.CannotOperate | invalid status cannot operate | You cannot perform the operation when the specified resource is in the current state. | diagnosis | |
| 400 | InvalidStatus.EcsStatusNotSupport | The special instance status Pending is not support operate | The instance is in the Suspended state and does not support this operation. | diagnosis |
| 400 | InvalidStatus.EniStatusNotSupport | The status of the specified Eni does not support the operation. | The ENI status does not support this operation. | diagnosis |
| 400 | InvalidStatus.NatGateway | nat gateway status is incorrect. | The NAT gateway is in an invalid state. | diagnosis |
| 400 | InvalidStatus.NotAllow | Bind instance status invalid | The instance status of the instance to attach is invalid. | diagnosis |
| InvalidStatus.NotAllowed | The virtual border has been associated by physicalConnection. | The VBR is associated with an Express Connect circuit. | diagnosis | |
| InvalidStatus.NotAllowed | Invalid virtual border router status. | The current VBR status does not support this operation. | diagnosis | |
| 400 | InvalidStatus.SnatOrDnat | Operation failed because snat or dnat in unstable status. | Failed to disassociate the EIP because the SNAT or DNAT entry is in a non-stable state. | diagnosis |
| InvalidStatus.StatusNotEnabled | The physical connection status is invalid. | The status of the Express Connect circuit does not support this operation. Check the status of the Express Connect circuit. | diagnosis | |
| 400 | InvalidStatus.vbrAttatchToEcr | Invalid virtual border router ecr status. | The VBR is associated with an ECR. Disassociate the VBR from the ECR first. | diagnosis |
| 400 | InvalidTagKey | The tag keys are not valid. | The tag index is invalid. | diagnosis |
| 400 | InvalidTagKey.Malformed | The specified tag key is invalid. | The tag key is invalid. Specify a valid tag key and try again. | diagnosis |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | The resource scope is invalid. | diagnosis |
| 400 | InvalidTagValue | The tag values are not valid. | The tag value is invalid. | diagnosis |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | The current transit router does not support this operation. Upgrade the transit router and try again. | diagnosis |
| 400 | InvalidTunnelCidr.Malformed | The specified TunnelCidr is malformed. | The specified tunnel CIDR block is invalid. | diagnosis |
| InvalidType.Malformd | The Type provided was invalid. | Type is set to an invalid value. | diagnosis | |
| InvalidUserCidr.Malformed | Specified UserCird status is wrong | UserCidr is set to an invalid value. | diagnosis | |
| 400 | InvalidUserCidr.Malformed | Specified UserCidr overlapping in of 100.64.0.0/10. | The UserCidr overlaps with 100.64.0.0/10. | diagnosis |
| InvalidUserCidr.Quota | Specified UserCidr number is greater than 3. | The number of user CIDR blocks that you specify has reached the upper limit. | diagnosis | |
| 400 | InvalidUserCidr.Quota | The number of user CIDR blocks that you specify has reached the quota limit. | The number of specified user CIDR block parameters has reached the quota limit. | diagnosis |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter is not found. | The VBR does not exist. Check the VBR ID. | diagnosis | |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter or PhysicalConnection does not exist in our records. | The VBR or the Express Connect circuit does not exist. | diagnosis | |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter does not exist in our records. | The VBR does not exist. Check the VBR ID. | diagnosis | |
| InvalidVbrNetwork | vbr netowrk not exists | The VBR does not exist. Check the VBR ID. | diagnosis | |
| InvalidVbrOwnerId.NotFound | The specified VbrOwnerId is not valid. | VbrOwnerId is set to an invalid value. | diagnosis | |
| InvalidVBRStatus | invalid virtual border router status. | The VBR is in an invalid state. | diagnosis | |
| InvalidVlanId.Malformed | The specified VlanId is not valid. | VlanId is set to an invalid value. | diagnosis | |
| InvalidVlanId.Used | The specified VlanId has been used. | The VLAN ID is in use. | diagnosis | |
| InvalidVPC.NotFound | vpc not exists. | The VPC does not exist. Check whether the specified VPC is valid. | diagnosis | |
| 400 | InvalidVpc.NotFound | The specified VPC is not found. | The specified VPC does not exist. | diagnosis |
| 400 | InvalidVpc.NotFound | The specified VPC was not found. | The specified VPC-connected instance was not found. | diagnosis |
| InvalidVpcDiscription.Malformed | Specified VPC description is not valid. | The format of the VPC description is invalid. | diagnosis | |
| 404 | InvalidVpcId.NotFound | Specified value of VpcId is not found in our record. | The VPC does not exist. Check whether the specified VPC is correct. | diagnosis |
| InvalidVpcId.NotFound | Specified VPC does not exist. | The specified VPC does not exist. | diagnosis | |
| 400 | InvalidVpcId.NotFound | %s [%s] is not found. | The specified VpcId instance does not exist. | diagnosis |
| 400 | InvalidVpcId.NotFound | The specified VPC was not found. | The specified VPC-connected instance was not found. | diagnosis |
| 400 | InvalidVpcIdNumber.NotSupported | The number of vpcIds exceeds the limit. | The number of VPC IDs exceeds the limit. | diagnosis |
| InvalidVpcName.Malformed | Specified VPC name is not valid. | The format of the VPC name is invalid. Enter a valid VPC name and try again. | diagnosis | |
| InvalidVPCStatus | vpc incorrect status. | The VPC is in an invalid state. | diagnosis | |
| InvalidVpnConnection.AlreadyExists | Vpn connection already exists. | Vpn connection already exists. | diagnosis | |
| 404 | InvalidVpnConnectionInstanceId.NotFound | The specified vpn connection instance id does not exist. | The specified VPN connection does not exist. Check whether the VPN connection ID is correct. | diagnosis |
| 400 | InvalidVpnGatewayInstanceId.NotFound | The specified vpn gateway instance id does not exist. | The specified VPN gateway does not exist. Check whether the VPN gateway is correct. | diagnosis |
| 400 | InvalidVpnInstanceId.NotFound | The specified VPN was not found. | The specified VPN instance was not found. | diagnosis |
| 404 | InvalidVpnInternetIp.NotFound | The specified VPN IP does not exist. | The VPN gateway IP address does not exist. | diagnosis |
| 400 | InvalidVpnRouteEntry.NotFound | The specified route entry does not exist. | The specified route entry does not exist. | diagnosis |
| InvalidVRouter.NotFound | vRouter not exists. | The specified vRouter does not exist. Check whether the specified vRouter is valid. | diagnosis | |
| 400 | InvalidVRouterDescription.Malformed | Specified virtual router description is not valid. | The vRouter description is invalid. | diagnosis |
| InvalidVRouterDiscription.Malformed | Specified virtual router description is not valid. | The description format of the specified vRouter is invalid. | diagnosis | |
| InvalidVRouterId.NotFound | Specified virtual router does not exist. | The specified vRouter does not exist. Check whether the specified vRouter is valid. | diagnosis | |
| InvalidVRouterName.Malformed | Specified virtual router name is not valid. | The name format of the specified vRouter is invalid. | diagnosis | |
| 400 | InvalidVSwitch.NotFound | The specified vSwitch is not found. | The specified vSwitch does not exist. | diagnosis |
| InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The vSwitch description is invalid. | diagnosis | |
| 400 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | The format of the vSwitch description is invalid. | diagnosis |
| 400 | InvalidVSwitchId.FirstVswitchIpNotEnough | The ip of vswitch1 not enough. | The available IP address count in the primary vSwitch is insufficient. The primary vSwitch does not have enough active IP addresses. | diagnosis |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The available zone of vswitch1 not supported. | The zone of the primary vSwitch is not supported. | diagnosis |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The zone of vSwitch does not support creating a ha-tunnel VPN. | The zone of the virtual switch does not support dual-tunnel VPN. Use a different virtual switch. | diagnosis |
| InvalidVSwitchId.NotFound | The specified virtual switch does not exists. | The vSwitch does not exist. | diagnosis | |
| InvalidVSwitchId.NotFound | The specified virtual switch not found. | The vSwitch does not exist. | diagnosis | |
| InvalidVSwitchId.NotFound | VSwitch not exist. | The error message returned because the specified vSwitch does not exist. Check whether the specified vSwitch ID is valid. | diagnosis | |
| InvalidVSwitchId.NotFound | The specified VSwitch does not exist in the specified region. | The vSwitch does not exist in the specified region. | diagnosis | |
| 400 | InvalidVSwitchId.SecondVswitchIpNotEnough | The ip of vswitch2 not enough. | The number of available IP addresses in the secondary vSwitch is insufficient. | diagnosis |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The available zone of vswitch2 not supported. | The zone of the secondary vSwitch is not supported. | diagnosis |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | when creating a vpn gateway for this region, you cannot enter the second vswitch id. | A second vSwitch ID cannot be specified when you create a VPN gateway in this region. | diagnosis |
| 400 | InvalidVSwitchId.VswitchIdShouldDifferent | The VSwitch ids should be different. | The primary zone and secondary zone cannot be the same. | diagnosis |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | Two vSwitches should belong to different Availability Zones. | The two vSwitches specified for creating a dual-tunnel VPN gateway must belong to different zones. | diagnosis |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | the available zone of vswitch1 and vswitch2 should be different. | The two zones specified for creating a dual-tunnel VPN gateway must be different. | diagnosis |
| 400 | InvalidVSwitchName.Malformed | Specified virtual switch name is not valid. | The vSwitch name format is invalid. Verify the vSwitch name format. | diagnosis |
| 400 | InvalidZoneId.DisasterZoneNotSupport | the disaster available zone not support. | The zone for dual-tunnel disaster recovery is not supported. | diagnosis |
| 400 | InvalidZoneId.FirstZoneNotSupport | the first available zone not support. | The first zone specified is unavailable. | diagnosis |
| InvalidZoneId.NotFound | Specified value of ZoneId is not exists. | The specified zone does not exist. | diagnosis | |
| InvalidZoneId.NotFound | Specified zone does not exist. | The zone ID is invalid. | diagnosis | |
| InvalidZoneId.NotFound | Can not find ZoneId for allocated ip. | The zone of the specified IP address is invalid. | diagnosis | |
| INVALID_COMPONENT | This instance type is unavailable for this account. | diagnosis | ||
| INVALID_PARAMETER | The parameter invalid. | A parameter is set to an invalid value. | diagnosis | |
| 400 | INVALID_VPC_ID | The Specified VpcId not match. | The VPC does not exist. Check whether the specified VPC is correct. | diagnosis |
| INVALID_WEIGHT_PARAM | Specified value of weight invalid | The specified weight is invalid. | diagnosis | |
| 400 | InvokeError | instance quota rule invoke error. | Failed to retrieve rule data. Try again later. | diagnosis |
| 400 | Ip.Allocated | The reserve ip has been allocated. | The reserved IP address has already been allocated. | diagnosis |
| 400 | IpConflict | Client IP pool conflict with other SSL VPN server in the same VPC. | The client IP pool conflicts with another SSL VPN server in the same VPC. | diagnosis |
| 400 | IpConflict | Client IP pool conflict with local IP range. | The client IP pool conflicts with the local IP range. | diagnosis |
| IpInstanceId.AlreadyInBandwidthPackage | The EIP is already associated with the EIP bandwidth plan. | diagnosis | ||
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId is already added to the bandwidth package. | The specified EIP has already been added to a bandwidth plan. | diagnosis |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId already in bandwidthPackage. | The specified EIP already exists in the Internet Shared Bandwidth instance. | diagnosis |
| 400 | IpInstanceId.AlreadyOutsideBandwidthPackage | The eip instance is already outside bandwidth package. | The specified EIP is not in the bandwidth plan. | diagnosis |
| IpInstanceId.BizStatusInvalid | The specified EIP is disabled. | diagnosis | ||
| 400 | IpInstanceId.BizStatusInvalid | The specified EIP BizStatus is incorrect. | The business status of the specified EIP is invalid. | diagnosis |
| IpInstanceId.ChargeType.NotSupport | The EIP uses the subscription billing method. | diagnosis | ||
| 400 | IpInstanceId.ChargeType.NotSupport | You cannot add subscription EIP instance to the bandwidth package. | A subscription EIP cannot be added to a bandwidth plan. | diagnosis |
| 400 | IpInstanceId.InvalidIpInternetChargeType | You cannot add the hybrid cloud EIP to a pay by traffic bandwidth package. | An EIP in hybrid cloud mode cannot be added to a pay-by-data-transfer bandwidth plan. | diagnosis |
| IpInstanceId.NotBandwidthPackage | The EIP is not associated with an EIP bandwidth plan. | diagnosis | ||
| IpInstanceId.QuotaExceeded | The number of EIPs associated with the EIP bandwidth plan exceeds the upper limit. | diagnosis | ||
| 400 | IpInstanceId.QuotaExceeded | The maximum number of EIP that you can add to the bandwidth package is exceeded. | The maximum number of EIPs that can be added to the bandwidth plan has been reached. | diagnosis |
| LastTokenProcessing | The last token request is processing. | A token request is being processed. Try again later. | diagnosis | |
| LimitationExceed.InterfaceNumberOnRouter | Total number of RouterInterfaces on a Router exceeded. | The number of router interfaces reaches the quota. | diagnosis | |
| LinkRole.NotSupport | This linkrole is not supported | This link is not supported. | diagnosis | |
| 404 | MaintenanceEvent.EventNotExist | Maintenance event is not exist. | The O&M event does not exist. | diagnosis |
| 400 | MaintenanceEvent.ExecuteTimeShouldBeforeLatestTime | The specified execution time of event must be before the latest execution time. | The specified execution time of the O&M event must be earlier than the latest execution time. | diagnosis |
| MCMS_VBR_EMPTY | Specified region have no vbr. | No VBR exists in the region. Select another region and try again. | diagnosis | |
| MCMS_VPC_EMPTY | Specified region have no vpc. | No VPC exists in the region. Specify another region and try again. | diagnosis | |
| 400 | Mismatch.%sAnd%s | The %s and %s are mismatched. | The parameters do not match. Check the parameters. | diagnosis |
| 400 | Mismatch.CbwpZoneAndCloudBoxEipZone | The CbwpZone and EipZone are mismatched. | The zones of the CloudBox Internet Shared Bandwidth instance and the EIP do not match. | diagnosis |
| 400 | Mismatch.CloudBoxCbwpZoneAndEipZone | The CbwpZone and EipZone are mismatched. | The zones of the CloudBox Internet Shared Bandwidth instance and the EIP do not match. | diagnosis |
| 400 | Mismatch.EipSecurityProtectionTypeAndPoolSecurityProtectionType | The EipSecurityProtectionType and PoolSecurityProtectionType are mismatched. | The security protection type of the EIP does not match the security protection type of the address pool. | diagnosis |
| 400 | Mismatch.EniIdAndRouteTableId | The operation is not allowed because eni and route table not in same vpc. | The operation failed because the specified network interface controller (NIC) and the route table do not belong to the same VPC. | diagnosis |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | The specified high-availability virtual IP address and the route table do not belong to the same VPC. | diagnosis |
| 400 | Mismatch.IpAndBandwidthPackage | The IP does not match the bandwidth package and is not in the specified bandwidth package. | The IP address does not match the bandwidth package. The IP address is not in the specified bandwidth package. | diagnosis |
| 400 | Mismatch.IpAndIsp | The specified IP address does not match the ISP. | Failed to request the specified IP address. The ISP and IP parameters do not match. | diagnosis |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | The operation failed because the specified IPv4 gateway and the route table do not belong to the same VPC. | diagnosis |
| 400 | Mismatch.Ipv6AddressAndIpv6Gateway | The %s and %s are mismatched. | The specified Ipv6Address and Ipv6Gateway are not in the same VPC. | diagnosis |
| 400 | Mismatch.IpVersionAndIpamPoolIpVersion | The input IpVersion is inconsistent with the IpVersion of the input IPAM pool. | The IpVersion of the input does not match the IpVersion of the specified address pool. | diagnosis |
| 400 | Mismatch.NatIpAndNatIpCidr | The %s and %s are mismatched. | %s and %s do not match. | diagnosis |
| 400 | Mismatch.NetworkAclAndVSwitch | The specified network ACL and vSwitch are not matched. | The specified network ACL and the vSwitch are not associated. | diagnosis |
| 400 | Mismatch.ResourceRegionAndServiceRegion | The region where the resource is located is inconsistent with the region where the service is called. | The region of the resource does not match the region of the called service. | diagnosis |
| 400 | Mismatch.VSwitchAndPrivateIpAddress | The vswitch and privateIpAddress are mismatched. | The specified private IP address does not match the vSwitch. | diagnosis |
| 400 | MissingParam | MissingParameter %s | A required parameter is missing. | diagnosis |
| 400 | MissingParam | Miss mandatory parameter. | A required parameter is missing. | diagnosis |
| 400 | MissingParam.%s | The param of %s is missing. | A required parameter is missing. | diagnosis |
| 400 | MissingParam.Action | You must specify Action. | The Action parameter is not specified. | diagnosis |
| 400 | MissingParam.AliUid | You must specify AliUid. | The AliUid parameter is missing. | diagnosis |
| 400 | MissingParam.AliUid | AliUid is missing. | The AliUid parameter is missing. | diagnosis |
| 400 | MissingParam.aliUid | The param of aliUid is missing. | The aliUid parameter is missing. | diagnosis |
| 400 | MissingParam.AssociatedInstanceId | The param of AssociatedInstanceId is missing when AssociatedInstanceType is specified. | The AssociatedInstanceId parameter is missing. | diagnosis |
| 400 | MissingParam.Bandwidth | You must specify Bandwidth. | The Bandwidth parameter is missing. | diagnosis |
| 400 | MissingParam.Bandwidth | Missing param of Bandwidth. | The Bandwidth parameter is missing. | diagnosis |
| 400 | MissingParam.bid | The param of bid is missing. | The bid parameter is missing. | diagnosis |
| 400 | MissingParam.BindInstanceId | The param of BindInstanceId is missing. | The BindInstanceId parameter is missing. | diagnosis |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask is not specified. | Failed to add a CIDR block to the address pool because the CIDR block or mask parameter is missing. | diagnosis |
| 400 | MissingParam.CidrOrCidrMask | The CIDR or CIDR Mask must be input. | Specify Cidr or CidrMask when creating a resource from an IPAM pool. | diagnosis |
| 400 | MissingParam.CidrReservationMaskOrCidrReservationCidr | Either VSwitchCidrReservationMask or VSwitchCidrReservationCidr should be specified. | VSwitchCidrReservationMask and VSwitchCidrReservationCidr cannot both be empty. Specify one of them and try again. | diagnosis |
| 400 | MissingParam.ConstructionTime | The parameter ConstructionTime is mandatory. | The planned construction time is required. | diagnosis |
| 400 | MissingParam.context | The param of context is missing. | The context parameter is missing. | diagnosis |
| 400 | MissingParam.CustomerGatewayAsn | Asn of customer gateway is mandatory when BGP is enabled. | The autonomous system number of the customer gateway cannot be empty when BGP is enabled. | diagnosis |
| 400 | MissingParam.Description | You must specify Description. | The description of the instance is required. | diagnosis |
| 400 | MissingParam.DstCidrBlock | You must specify destination CIDR block. | The destination CIDR block is not specified. | diagnosis |
| 400 | MissingParam.EnableIpv6 | The input parameter EnableIpv6 that is mandatory for processing this request is not supplied. | The EnableIpv6 parameter is missing. | diagnosis |
| 400 | MissingParam.EnableIpv6 | The param of EnableIpv6 is missing. | The EnableIpv6 parameter is missing. | diagnosis |
| 400 | MissingParam.FilterId | You must specify filter instance ID. | The filter instance ID parameter is not specified. | diagnosis |
| 400 | MissingParam.FullnatTableIdOrNatGatewayId | FullnatTableId and natGatewayId can not both be null | FullnatTableId and natGatewayId cannot both be empty. | diagnosis |
| 400 | MissingParam.IDaaSApplicationId | The input parameter IDaaSApplicationId is mandatory when enable multi-factor authentication. | Specify the IDaaSApplicationId parameter when two-factor authentication is enabled. | diagnosis |
| 400 | MissingParam.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | The IDaaS instance ID is required when two-factor authentication is enabled. | diagnosis |
| 400 | MissingParam.IDaaSRegionId | The input parameter IDaaSRegionId is mandatory when enable multi-factor authentication. | Specify the IDaaSRegionId parameter when two-factor authentication is enabled. | diagnosis |
| 400 | MissingParam.InstanceId | You must specify InstanceId. | Missing param of InstanceId. | diagnosis |
| 400 | MissingParam.InstanceId | Missing param of InstanceId. | The InstanceId parameter is missing. | diagnosis |
| 400 | MissingParam.InstanceId | The parameter InstanceId is mandatory. | The Express Connect circuit instance ID is required. | diagnosis |
| 400 | MissingParam.InstanceId | The param of InstanceId can't be null or empty. | The InstanceId parameter cannot be empty. | diagnosis |
| 400 | MissingParam.Ipv6CidrBlock | The parameter Ipv6CidrBlock is mandatory. | The required parameter Ipv6CidrBlock is missing. | diagnosis |
| 400 | MissingParam.Ipv6InstanceId | The param of Ipv6InstanceId is missing. | The Ipv6InstanceId parameter is not specified. | diagnosis |
| 400 | MissingParam.IpVersion | The parameter IpVersion is missing. | The IpVersion parameter is missing. | diagnosis |
| 400 | MissingParam.Name | You must specify Name. | The instance name is missing. | diagnosis |
| 400 | MissingParam.NatGatewayId | You must specify NatGatewayId. | The NatGatewayId parameter is required. | diagnosis |
| 400 | MissingParam.NetworkInterfaceId | The input parameter NetworkInterfaceId that is mandatory for processing this request is not supplied. | The NetworkInterfaceId parameter is required when you create an SNAT rule for a NAT gateway that has PrivateLink enabled. | diagnosis |
| 400 | MissingParam.NewNextHopId | The parameter NewNextHopId is mandatory. | The next hop instance ID of the route to be modified is missing. | diagnosis |
| 400 | MissingParam.NewNextHopType | The parameter NewNextHopType is mandatory. | The next hop instance type of the route to be modified is missing. | diagnosis |
| 400 | MissingParam.ParameterMustNotNull | %s, %s. | A required parameter is missing. | diagnosis |
| 400 | MissingParam.PeerIpAddress | The param of PeerIpAddress is missing. | The peer IP address parameter is missing. | diagnosis |
| 400 | MissingParam.PhysicalConnectionId | You must specify PhysicalConnectionId. | The PhysicalConnectionId parameter is missing. | diagnosis |
| 400 | MissingParam.PhysicalConnectionId | PhysicalConnectionId is missing. | The PhysicalConnectionId parameter is missing. | diagnosis |
| 400 | MissingParam.PMInfo | The parameter PMInfo is mandatory. | The construction engineer information is required. | diagnosis |
| 400 | MissingParam.Priority | You must specify Priority. | The priority parameter is not specified. | diagnosis |
| 400 | MissingParam.Protocol | You must specify Protocol. | The protocol parameter is not specified. | diagnosis |
| 400 | MissingParam.PublicIpAddressPoolId | The parameter PublicIpAddressPoolId is missing. | The PublicIpAddressPoolId parameter is missing. | diagnosis |
| 400 | MissingParam.RegionNo | You must specify RegionNo. | The RegionNo parameter is missing. | diagnosis |
| 400 | MissingParam.RegionNo | RegionNo is missing. | The RegionNo parameter is missing. | diagnosis |
| 400 | MissingParam.RemoteId | The remote ID is mandatory when creating national standard VPN connection. | The remote ID is required when you create a ShangMi (SM) VPN connection. | diagnosis |
| 400 | MissingParam.ReservedCidrOrReservedCidrMask | MissingParam.ReservedCidrOrReservedCidrMask | Either ReservedCidr or ReservedCidrMask must be specified. | diagnosis |
| 400 | MissingParam.Resource | Missing parameter Resource. | The Resource parameter is missing. | diagnosis |
| 400 | MissingParam.ResourceType | The param of ResourceType is missing. | The ResourceType parameter is missing. | diagnosis |
| 400 | MissingParam.RouteEntries | The parameter RouteEntries is missing. | The RouteEntries parameter is missing. | diagnosis |
| 400 | MissingParam.RouteEntryId | The param of %s is missing. | A required parameter is missing. | diagnosis |
| 400 | MissingParam.RouteEntryIdOrRouteTableDstCidr | The request is missing required parameters. You must provide either the RouteEntryId or the combination of RouteTableId and DestinationCidrBlock to proceed. Please ensure that one of these parameter sets is included in your request. | A required parameter is missing. You must provide RouteEntryId, or provide both RouteTableId and DestinationCidrBlock. | diagnosis |
| 400 | MissingParam.RuleId | You must specify rule instance ID. | The traffic mirroring filter rule instance ID parameter is not specified. | diagnosis |
| 400 | MissingParam.Rules | You must specify rule instance ID. | The traffic mirroring filter rule instance ID is not specified. | diagnosis |
| 400 | MissingParam.ScheduledMigrationParam | You must specify the parameters that are required for the scheduled migration. | A required parameter for the scheduled migration of the NAT gateway is missing. | diagnosis |
| 400 | MissingParam.SecondaryCidrBlockOrIpv6CidrBlock | Either SecondaryCidrBlock or Ipv6CidrBlock must be specified. | The required parameter secondary CIDR block or IPv6 CIDR block is missing. | diagnosis |
| 400 | MissingParam.SecondaryCidrMask | The parameter SecondaryCidrMask must be input. | The SecondaryCidrMask parameter is required. | diagnosis |
| 400 | MissingParam.SecondaryCidrOrIpv6Cidr | Either the SecondaryCidrBlock or the Ipv6CidrBlock parameter is required, but both cannot be entered simultaneously. | When you add a secondary CIDR block to a VPC without using an IPAM pool, you must specify either SecondaryCidrBlock or Ipv6CidrBlock, but not both. | diagnosis |
| 400 | MissingParam.SnatIp | The input parameter SnatIp that is mandatory for processing this request is not supplied. | The SnatIp parameter is required when you create an SNAT rule for an Internet NAT gateway or VPC NAT gateway. | diagnosis |
| 400 | MissingParam.SourceInstanceIds | You must specify source instance ID. | The traffic mirror source instance ID parameter is not specified. | diagnosis |
| 400 | MissingParam.Spec | The param of Spec is missing. | The Spec parameter is missing. | diagnosis |
| 400 | MissingParam.SrcCidrBlock | You must specify source CIDR block. | The source CIDR block is not specified. | diagnosis |
| 400 | MissingParam.Tags | You must specify the Tags parameter. | The Tags parameter is missing. | diagnosis |
| 400 | MissingParam.Tags | The Tags parameter is required. | The Tags parameter is required. | diagnosis |
| 400 | MissingParam.TimePoint | You must specify TimePoint. | The TimePoint parameter is required. | diagnosis |
| 400 | MissingParam.TrafficAnalyzerIdOrLogProjectOrLogStore | TrafficAnalyzerId and ProjectName and LogStoreName parameters are not passed in. | Neither TrafficAnalyzerId nor the ProjectName and LogStoreName parameters are specified. | diagnosis |
| 400 | MissingParam.TrafficMirrorRules | You must specify traffic mirror rules. | The traffic mirroring filter rule is not specified. | diagnosis |
| 400 | MissingParam.VbrHaIdOrVbrId | Missing parameter VBR switch group instance ID or VBR instance ID. | The VBR failover group instance ID or VBR instance ID is missing. | diagnosis |
| 400 | MissingParam.VbrId | You must specify VbrId. | The vbrId parameter is missing. | diagnosis |
| 400 | MissingParam.VpcId | You must specify VpcId. | The required parameter VpcId is missing. | diagnosis |
| 400 | MissingParam.vpcId | The parameter vpcId is mandatory. | The parameter is missing. The vpcId parameter is required. | diagnosis |
| 400 | MissingParam.VSwitchId | The parameter VSwitchId is missing. | The VSwitchId parameter is missing. | diagnosis |
| 400 | MissingParam.Zones | The Zones parameter is required. | The Zones parameter is required. | diagnosis |
| MissingParameter | Missing mandatory parameter | Required parameters are not specified. Check whether you have specified all required parameters before you call this operation. | diagnosis | |
| MissingParameter | Either nexthopId or nextHopList should be specified | nexthopId or nextHopList is not specified. | diagnosis | |
| MissingParameter | The input parameter is mandatory for processing this request is not supplied. | Some required parameters are not specified. Specify all required parameters and try again. | diagnosis | |
| MissingParameter | The input parameter 'PhysicalConnectionId' that is mandatory for processing this request is not supplied. | PhysicalConnectionId is not specified. | diagnosis | |
| MissingParameter | The input parameter 'VlanId' that is mandatory for processing this request is not supplied. | VlanId is not specified. | diagnosis | |
| MissingParameter | The input parameter 'LocalGatewayIp' that is mandatory for processing this request is not supplied. | LocalGatewayIp is not specified. | diagnosis | |
| MissingParameter | The input parameter 'PeerGatewayIp' that is mandatory for processing this request is not supplied. | PeerGatewayIp is not specified. | diagnosis | |
| MissingParameter | The input parameter 'PeeringSubnetMask' that is mandatory for processing this request is not supplied. | PeeringSubnetMask is not specified. | diagnosis | |
| MissingParameter | LocalGatewayIp | LocalGatewayIp is not specified. | diagnosis | |
| MissingParameter | Miss mandatory parameter. | Some required parameters are not specified. Specify all required parameters and try again. | diagnosis | |
| MissingParameter | Some required parameters are not specified. Specify all required parameters and try again. | diagnosis | ||
| MissingParameter | The input parameter OwnerId | Some required parameters are not specified. | diagnosis | |
| 400 | MissingParameter | LocalGatewayIp, peerGatewayIp and peeringSubnetMask must not be null. | The parameters are missing. LocalGatewayIp, peerGatewayIp, and peeringSubnetMask cannot be empty. | diagnosis |
| 400 | MissingParameter.bandwidth | portType and bandWidth cannot be null at the same time. | The port type and bandwidth value cannot both be empty. | diagnosis |
| MissingParameter.BandwidthPackage | only support one BandwidthPackage be created with NatGateway. | You must specify an EIP bandwidth plan. | diagnosis | |
| 400 | MissingParameter.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | The IDaaSInstanceId parameter must be specified when two-factor authentication is enabled. | diagnosis |
| 400 | MissingParameter.TagKey | The input parameter TagKey that is mandatory for processing this request is not supplied. | The TagKey parameter is missing. | diagnosis |
| 400 | MissingParameter.TagValue | The input parameter TagValue that is mandatory for processing this request is not supplied. | The TagValue parameter is missing. | diagnosis |
| 400 | MissingParameter.TunnelCidr | The parameter TunnelCidr is mandatory when BGP is enabled. | The tunnel CIDR block parameter is required when BGP is enabled. | diagnosis |
| 400 | MissingParameter.TunnelOptionsSpecification | The required parameters are missing when creating a tunnel for dual-tunnel VPN. | Required parameters are missing when creating tunnels for a dual-tunnel VPN connection. | diagnosis |
| 400 | ModifyIkeV1WithMultiRoutes.Invalid | Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol. | Failed to modify the VPN connection parameters. Multi-network configuration is not supported when the IKEv1 protocol is used. | diagnosis |
| 400 | MultiplePconnSingleVbrNotSupportShutdown | Vbr for single vbr and multiple pconn scenarios does not support failover test job. | Fault simulation is not supported for a Virtual Border Router (VBR) with multiple Express Connect circuits. | diagnosis |
| NATGATEWAY_FINANCIALLOCKED | The specified NAT gateway has expired. | diagnosis | ||
| NATGW_MODIFY_SPEC_SAME | The specified Spec is same with now. | The specified gateway size is the same as the current one. | diagnosis | |
| 400 | NATGW_NOT_EXIST | The specified NAT gateway does not exist. | The Internet NAT gateway does not exist. | diagnosis |
| 400 | NetworkAclExistBinding | The Network Acl has bindings. | The network ACL has associated resources. | diagnosis |
| 400 | NetworkStatus.Modifying | The special Network Acl is in modifying. | The specified network ACL is being modified. | diagnosis |
| NOCARD | No payment card is associated. | diagnosis | ||
| 400 | NoPermission.CreateServiceLinkedRole | You are not authorized to create service linked role. | You do not have the permission to create a service-linked role. | diagnosis |
| 400 | NotFound.BandwidthPackage | BandwidthPackage is not exist. | The specified bandwidth package does not exist. | diagnosis |
| 405 | NotSupportLinkrole | The router interface is not a VLAN interface for connection. | The router interface is a user-side interface and cannot be activated. | diagnosis |
| 400 | NotSupportLinkrole | This RouterInterface is not a vlan interface for connection. | The router interface is not a virtual network interface used for connections. | diagnosis |
| 400 | NotSupportVpnConnectionParameter.IpsecAuthAlg | The specified vpn connection ipsec Auth Alg is not support. | The authentication algorithm specified in the IPsec-VPN connection is not supported. | diagnosis |
| 400 | NotSupportVpnConnectionParameter.IpsecPfs | The specified vpn connection ipsec Ipsec Pfs is not support. | The PFS parameter specified in the IPsec-VPN connection is not supported. | diagnosis |
| NOT_ALLOW_USE_SOURCECIDR | The User not in nat_scope_unlimited white list. Cannot use SourceCidr param. | The private IP address does not fall within the VPC CIDR block. | diagnosis | |
| NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | diagnosis | ||
| 400 | nsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not support to enable security protection. | VPC NAT gateways do not support enabling security protection. | diagnosis |
| 400 | nvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | The Period parameter is invalid. | diagnosis |
| 409 | OperationConflict | Request was denied due to conflict with a previos request. | A request conflict occurred. Try again later. | diagnosis |
| 409 | OperationConflict | The operation against this instance is too frequent, please try again later. | Operations on this instance are too frequent. Try again later. | diagnosis |
| 409 | OperationConflict | Request was denied due to conflict with a previous request. | A request conflict occurred. Try again later. | diagnosis |
| OperationDenied | Eip of default vpc not allow this operation | The operation is not supported by EIPs in a default VPC. | diagnosis | |
| OperationDenied | The operation is not supported in this status. | The status of the VPC is invalid and the operation cannot be performed. | diagnosis | |
| OperationDenied | The snapshot creation for the specified disk is not finished yet. | The snapshot of the specified disk is being created. | diagnosis | |
| OperationDenied | Specified operation is denied as route entry type is system. | The specified route is a system route. | diagnosis | |
| OperationDenied | Specified instance is not in VPC. | The specified instance does not exist in the VPC. | diagnosis | |
| OperationDenied | The user cannot allow to create natgw | You are not allowed to delete system routes. | diagnosis | |
| 400 | OperationDenied.AccountTypeRestricted | The operation is denied because your account type is not supported. | Your account type does not support this transaction. | diagnosis |
| 400 | OperationDenied.AllTrafficPathOfManagedExist | The resource you specified has created a flow log instance that collects the traffic of all scenarios. You cannot create a flow log instance that collects only some scenarios. | A flow log instance that collects traffic for all scenarios already exists for the specified resource. You cannot create another flow log instance that collects traffic for only some scenarios. | diagnosis |
| 400 | OperationDenied.AlreadyNewest | The operation is denied because the firmware version of the VPN gateway is already the latest. | The firmware version of the current VPN gateway is already the latest and cannot be upgraded again. | diagnosis |
| 400 | OperationDenied.AssociateGatewayRouteTable | The operation is not allowed because gateway route tables cannot be bound to a vSwitch. | A vSwitch cannot be associated with a gateway route table. | diagnosis |
| 400 | OperationDenied.AvailableCidrInsufficient | The operation is not allowed because available CIDR is insufficient. | The operation is rejected because available CIDR block resources are insufficient. | diagnosis |
| 400 | OperationDenied.BetweenFinanceUserAndNormalUser | Creating VPC connection between financial user and non-financial user is not allowed. | VPC peering connections cannot be created between Alibaba Finance Cloud accounts and regular accounts. | diagnosis |
| 400 | OperationDenied.CenAttached | The operation is not allowed because the VPC is attached to CEN. | The operation is prohibited because the VPC is associated with a Cloud Enterprise Network (CEN) instance. | diagnosis |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | Creating a route that points to this type of CEN in the route table is not supported. | diagnosis |
| 400 | OperationDenied.CidrInExcludeCidrs | The operation is not allowed because the input CIDR is within the illegal CIDRs. | The operation is rejected because the specified CIDR block is within an invalid CIDR block range. | diagnosis |
| 400 | OperationDenied.CidrUnavailableInPool | The operation is not allowed because the CIDR is unavailable in the IPAM pool. | The operation is rejected because the CIDR block is not available in the IPAM pool. | diagnosis |
| 400 | OperationDenied.ClassicSLB | The operation is not allowed because of ClassicSLB. | The operation does not support Classic Load Balancer (CLB) instances that use the traditional load balancing mode. | diagnosis |
| 400 | OperationDenied.CloudBoxResourceExist | The operation is not allowed because there are resources related to the cloud box in VPC. | The operation is prohibited because the VPC contains CloudBox-related resources. | diagnosis |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | The operation is prohibited because only custom route tables can add route entries with the next hop pointing to a CloudBox-type VBR. | diagnosis |
| 400 | OperationDenied.CloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop to the cloud box VBR. | The operation is not allowed because the route table contains route entries with the next hop pointing to a CloudBox VBR. | diagnosis |
| 400 | OperationDenied.CloudBoxVSwitch | The operation is not allowed because the vswitch is a cloud box type. | The operation is prohibited because the vSwitch is of the CloudBox type. | diagnosis |
| 400 | OperationDenied.CloudBoxVSwitchExist | The operation is not allowed because a cloud box type vSwitch exists in VPC. | The operation is prohibited because the VPC contains CloudBox-type vSwitches. | diagnosis |
| 400 | OperationDenied.CloudBoxZone | The operation is not allowed because the zone is a cloud box type. | The operation is prohibited because the zone is of the CloudBox type. | diagnosis |
| 400 | OperationDenied.CreateEcmpForPublishedRouteEntry | Operation denied because of can not create EcmpRouteEntry for published RouteEntry. | A publish route entry does not support creating active/standby routes or load balancing routes. | diagnosis |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact you CBM. | You do not have the permission to create shared Express Connect circuits. Contact your account manager. | diagnosis |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact your CBM. | You do not have the permission to create shared Express Connect circuits. Contact your account manager. | diagnosis |
| 400 | OperationDenied.DeleteGatewayEndpointRoute | The operation is not allowed to delete route entry pointing gateway endpoint.. | Routes pointing to a gateway endpoint cannot be manually deleted. | diagnosis |
| 400 | OperationDenied.DeleteManagedRouteEntry | The operation is not allowed because of route entry is managed. | Routes managed by cloud services cannot be deleted. | diagnosis |
| 400 | OperationDenied.DeleteShareResource | This is not allowed to delete shared prefixList. | A shared prefix list cannot be deleted. | diagnosis |
| 400 | OperationDenied.DirectEipExist | The operation is not allowed because of existing directEip. | The operation is not allowed because the VPC contains pass-through EIPs or enhanced NAT gateways. | diagnosis |
| 400 | OperationDenied.DnatEntryStatusInvalid | The NAT gateway has DNAT entry in invalid status. | The DNAT entry configured on the NAT gateway is in an invalid state. | diagnosis |
| 400 | OperationDenied.DuplicateRole | The network interface must not be the source and the target of traffic mirror sessions at the same time. | A network interface controller (NIC) cannot be used as both the traffic mirror source and traffic mirror destination of a traffic mirror session at the same time. | diagnosis |
| 400 | OperationDenied.EcsNotSupportTrafficMirror | The ECS instance does not support traffic mirroring. | The ECS instance does not support the traffic mirroring feature. | diagnosis |
| 400 | OperationDenied.EipBondTypeIsAlreadyNAT | The EIP bond type is already NAT type. | The EIP bindng type is already NAT type. | diagnosis |
| 400 | OperationDenied.EipStatusInvalid | The NAT gateway has EIP in invalid status. | The status of the EIP bound to the NAT gateway is invalid. | diagnosis |
| 400 | OperationDenied.ExistDirectEip | The operation is not allowed because of existing direct eip. | You cannot create an IPv4 gateway because a direct-bindng EIP exists. | diagnosis |
| 400 | OperationDenied.ExistPublicIpv6IpInVpc | Operation denied because IPV6 public ip exists in VPC. | The operation failed because a public IPv6 address exists in the VPC. | diagnosis |
| 400 | OperationDenied.ExistRouteTable1.0 | A route table with a lower version exists in the VPC. Please submit a ticket for processing. | A legacy route table exists in the VPC. Submit a ticket to resolve this issue. | diagnosis |
| 400 | OperationDenied.ExistRouteTableV1 | The operation is not allowed because of existing RouteTable1.0. | The operation was rejected because a route table 1.0 exists. | diagnosis |
| 400 | OperationDenied.FlowLogDeliverFailed | The operation is not allowed due to an invalid delivery address. | The flow log delivery address is invalid. The flow log cannot be activated. | diagnosis |
| 400 | OperationDenied.FreeNetworkInterface | The network interface is not attached to any ECS instance. | The specified ENI is not associated with any ECS instance. | diagnosis |
| 400 | OperationDenied.GatewayAlreadyAssociated | The operation is not allowed because of the specified resource %s is already associated. | The operation is not allowed because the specified IPv4 gateway is in the bindng state. | diagnosis |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The gateway and the route table are not in the same VPC. | The gateway and the route table do not belong to the same VPC. Association is not allowed. | diagnosis |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The operation is not allowed because of GatewayAndTableNotInOneVpc. | The specified gateway route table and gateway instance do not belong to the same VPC. Check whether your input is correct. | diagnosis |
| 400 | OperationDenied.GatewayAssociated | You cannot delete the specified route table because it still associates with gateway. | The specified route table cannot be deleted because it is associated with a gateway. | diagnosis |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | The gateway route table does not support creating route entries that point to this instance type. | diagnosis |
| 400 | OperationDenied.IllegalNewNextHopType | When modifying the next hop of a route of the local type, a new next hop type that is not supported is passed in. | An unsupported next hop type was specified when modifying the next hop of a local route. | diagnosis |
| 400 | OperationDenied.IngressRoutingNotSupportAnycast | The operation is not allowed because ingress routing not support anycast. | The operation failed because an Anycast elastic IP address exists in the specified VPC. | diagnosis |
| 400 | OperationDenied.InstanceAttachCen | Operation denied because instance association CEN. | The operation failed because the instance is associated with CEN. | diagnosis |
| 400 | OperationDenied.InvalidInstanceDeliverScope | When modifying the delivery purpose of the FlowLog instance or starting and stopping NIS traffic analysis, you specify the type of delivery that is not allowed. | An unsupported delivery type was specified when modifying the delivery destination of a flow log instance or enabling/disabling NIS Traffic Analyzer. | diagnosis |
| 400 | OperationDenied.InvalidSourceBondEniType | The traffic mirroring source does not support the entered bond ENI type. | The traffic mirror source does not support the specified managed elastic network interface controller (NIC) type. | diagnosis |
| 400 | OperationDenied.InvalidTargetBondEniType | The traffic mirroring target does not support the entered bond ENI type. | The traffic mirror destination does not support the specified managed elastic network interface controller (NIC) type. | diagnosis |
| 400 | OperationDenied.IpamPoolNotInRegion | The operation is not allowed because the IPAM pool not in specific region does not support creating VPC or associating CIDR for VPC. | The operation was rejected because you cannot create a VPC or add a secondary CIDR block to a VPC from an IPAM pool that does not have a region attribute. | diagnosis |
| 400 | OperationDenied.IpBelongToOtherUser | The operation is not allowed because of ip belong to other user. | The request failed. The IP address belongs to another user. | diagnosis |
| 500 | OperationDenied.Ipv4GatewayExist | The operation is not allowed because of Ipv4GatewayExist. | The EIP bindng operation failed because an IPv4 gateway exists in this VPC. | diagnosis |
| 400 | OperationDenied.Ipv4GatewayNotActive | The operation is not allowed because of ipv4Gateway [%s] is not active. | The operation is not allowed because the specified IPv4 gateway is not activated. | diagnosis |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | Creating IPv6 routes on a custom route table is not allowed. | diagnosis |
| 400 | OperationDenied.ISPNotSupportDdosEnhanced | The operation is not allowed because of DdosEnhanced is not supported by current isp. | The current ISP does not support creating enhanced security protection address pools. | diagnosis |
| 400 | OperationDenied.L2EipBindIpAddress | Operation is denied because this region does not support L2 EIP binding to IP address. | This region does not support L2 EIP bindng to IP addresses. | diagnosis |
| 400 | OperationDenied.LOAForVirtualPhysicalConnection | The operation is not allowed because of LOAForVirtualPhysicalConnection. | Construction is not allowed for shared Express Connect circuits. | diagnosis |
| 400 | OperationDenied.LOAStatusNotAllowComplete | The operation is not allowed because of LOAStatusNotAllowComplete. | The LOA status of the port does not allow construction completion or circuit O&M. | diagnosis |
| 400 | OperationDenied.LocalEntryCanOnlyModifyNextHop | Only the nextHop parameter can be modified for a local route entry. | Only the next hop attribute of a local route can be modified. | diagnosis |
| 400 | OperationDenied.LocalRouteEntryBoundToVSwitch | The VSwitch to which the local route you modified belongs is bound to the current routing table. You are not allowed to modify its next hop. | The vSwitch to which the local route belongs is associated with the current route table. Modifying its next hop is prohibited. | diagnosis |
| 400 | OperationDenied.LocalRouteEntryInSystemRouteTable | The Local Route Entry In System Route Table Can Not Be Modify. | Modifying local routes in the system route table is prohibited. | diagnosis |
| 400 | OperationDenied.LocalRouteEntryModified | The next hop of a local route is modified. | The next hop of a local route has been modified. | diagnosis |
| 400 | OperationDenied.LocalRouteEntryModified | When you modify the next hop of a Local route in a custom routing table, the destination CIDR block of the Local route is exactly the same as the Cidr of a VSwitch bound to the routing table. | When modifying the next hop of a local route in a custom route table, the destination CIDR block of the local route is the same as the CIDR block of a vSwitch associated with the route table. | diagnosis |
| 400 | OperationDenied.MaskOfCidrIsNotAllowed | The input mask or mask of the input CIDR is not allowed. | The specified mask or the mask of the CIDR block is not within the allowed range. | diagnosis |
| 400 | OperationDenied.MissingAsn | The autonomous system number of the customer gateway is mandatory when BGP authentication key is specified. | When a BGP authentication key is specified for the customer gateway, the autonomous system number must also be specified. | diagnosis |
| 400 | OperationDenied.ModifyDefaultDhcpOptionsSet | The default DHCP options set is not allowed to be modified. | The default DHCP options set cannot be modified. | diagnosis |
| 400 | OperationDenied.ModifyManagedRouteEntry | The operation is not allowed because of route entry is managed. | The managed route cannot be modified. | diagnosis |
| 400 | OperationDenied.NatGatewayStatusInvalid | The NAT gateway status is invalid. | The status of the NAT gateway is invalid. | diagnosis |
| 400 | OperationDenied.NatgwExist | The operation is not allowed because the NAT gateway exists in VPC. | The specified operation is prohibited because a NAT gateway exists in the VPC. | diagnosis |
| 400 | OperationDenied.NeedPconnOwner | The operation is denied. | The deletion failed. The user who owns the physical port must perform the deletion. | diagnosis |
| 400 | OperationDenied.NeedVpconnOwner | The operation is denied. | The deletion failed. The user who owns the shared port must perform the deletion. | diagnosis |
| 400 | OperationDenied.NewNextHopNotSupportPublish | New nexthop is not supported for published route entry. | The route entry has been published to other components. The specified next hop type does not support route advertisement. | diagnosis |
| 400 | OperationDenied.NextHopExist | The operation is not allowed because the nexthop already exists. | The next hop of the target route entry that you want to modify already exists. | diagnosis |
| 400 | OperationDenied.NextHopNotChanged | The operation is not allowed because of NextHopNotChanged. | The specified operation is prohibited because the next hop has not changed. | diagnosis |
| 400 | OperationDenied.NextHopTypeNonsupport | The operation is not allowed because of nextHopType is nonsupport. | The specified resource type is not supported as a next hop. | diagnosis |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | Creating a route with this next hop type is not allowed. | diagnosis |
| 400 | OperationDenied.NisTrafficAnalyzerAggregationIntervalMismatch | The sampling interval of the FlowLog is greater than the sampling interval of the NIS Traffic Analyzer. | The sampling interval of the flow log is greater than the sampling interval of the NIS Traffic Analyzer. | diagnosis |
| 400 | OperationDenied.NisTrafficAnalyzerNotActive | The specified NIS Traffic Analyzer is not enabled. | The specified NIS Traffic Analyzer is not in the enabled status. | diagnosis |
| 400 | OperationDenied.NisTrafficAnalyzerNotFound | The specified NIS Traffic Analyzer does not exist. | The specified NIS Traffic Analyzer does not exist. | diagnosis |
| 400 | OperationDenied.NoAvailablePrivateIp | The operation is failed because of vSwitch has not availalbe private ip | Insufficient available private IP addresses in the current vSwitch. | diagnosis |
| 400 | OperationDenied.NoEnoughAvailablePrivateIps | The available private Ip number is not enough in your subnet. | Insufficient available private IP addresses in the subnet. | diagnosis |
| 400 | OperationDenied.NormalNatExist | The operation is not allowed because of existing normalNat. | The operation is not allowed because a standard NAT gateway exists in the VPC. | diagnosis |
| 400 | OperationDenied.NotAttachCen | The operation is not allowed because the instance is not attached to a CEN instance. | The instance is not attached to a CEN instance. The operation is prohibited. | diagnosis |
| 400 | OperationDenied.NotOpenDdosOriginProtectService | The operation is not allowed because of you do not open Ddos Origin Protection Service | Failed to create an EIP with Anti-DDoS (Enhanced) enabled because the Anti-DDoS Origin service has not been purchased. | diagnosis |
| 400 | OperationDenied.OperateSharedResource | The operation is not allowed because of the PublicIpAddressPool is a shared resource. | The public IP address pool instance is a shared resource and cannot be modified. | diagnosis |
| 400 | OperationDenied.OperateShareResource | The operation is not allowed because of OperateShareResource. | The operation failed because the operation involves a shared resource. | diagnosis |
| 400 | OperationDenied.OtherCloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop that points to a VBR other than this cloud box. | The specified operation is not allowed because the route table contains a route entry whose next hop points to a VBR that is not in the current CloudBox. | diagnosis |
| 400 | OperationDenied.OtherSubnetCreating | The operation is not allowed because a subnet is being created. | The specified operation is prohibited because another virtual subnet is being created. | diagnosis |
| 400 | OperationDenied.OtherSubnetProcessing | other subnet is processing. | The current vSwitch cannot be deleted because another subnet is being operated on. | diagnosis |
| 400 | OperationDenied.PconnNotAllowRecover | Exclusive physical connection does not allow recovery. | This operation cannot be performed on the current resource. Contact on-duty personnel for assistance. | diagnosis |
| 400 | OperationDenied.PconnTrafficNotEnable | Operation is not allowed because the outbound data transfer fees is not enabled. | The outbound cloud traffic fee is not enabled. The operation is prohibited. | diagnosis |
| 400 | OperationDenied.PrePaidInstance | The operation is not allowed because prepaid instance is no longer supported. | Subscription instances are no longer available for purchase. | diagnosis |
| 400 | OperationDenied.PrivateLinkNotEnabled | The NAT gateway is not enable for private link. | The NAT gateway does not have private connectivity enabled. | diagnosis |
| 400 | OperationDenied.QueryCdt95Instance | The operation is not allowed because of QueryCdt95Instance. | Querying Internet Shared Bandwidth instances that are connected to Cloud Data Transfer is not supported. | diagnosis |
| 400 | OperationDenied.RemoveCountExceedExistCount | The operation is not allowed because of remove-count exceed exist-count. | The number of CIDR blocks to delete exceeds the number owned by the prefix list. | diagnosis |
| 400 | OperationDenied.RequestRegionInvalid | The operation is not allowed because the request is not invoked in the region of the IPAM pool. | The operation is rejected because the request was not called in the region where the address pool resides. | diagnosis |
| 400 | OperationDenied.RouteEntryExist | The operation is not allowed because of existing routeEntry point to ipv4Gateway. | The IPv4 gateway cannot be deleted because routes pointing to the IPv4 gateway exist. | diagnosis |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | The specified operation is prohibited because the router interfaces are in different zones. | diagnosis |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | RouterInterface does not support IPv6. | diagnosis |
| 400 | OperationDenied.RouterInterfaceIpv6NotEnabled | Routerinterface does not support IPv6. | RouterInterface does not support IPv6. | diagnosis |
| 400 | OperationDenied.RouterInterfaceToDifferentVpc | The operation is not allowed because the router interface is connected to different VPCs. | The specified operation is prohibited because the router interfaces point to different VPCs. | diagnosis |
| 400 | OperationDenied.RouteTableAssociateNotCloudBoxVSwitch | The operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added. | The specified operation is prohibited because the route table is associated with a non-CloudBox vSwitch and cannot add a route entry pointing to a CloudBox VBR. | diagnosis |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of routeTableType is incorrect. | The operation is not allowed because the route table type is incorrect. | diagnosis |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of %s. | The specified gateway route table instance is not a border gateway route table. Check whether your input is correct. | diagnosis |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | Creating route entries is not allowed for the specified route table type. | diagnosis |
| 400 | OperationDenied.SlbNotInVpc | The specified SLB is not in any VPC. | The specified SLB instance does not belong to any VPC. | diagnosis |
| 400 | OperationDenied.SnatEntryStatusInvalid | The NAT gateway has SNAT entry in invalid status. | The SNAT entry configured on the NAT gateway is in an invalid state. | diagnosis |
| 400 | OperationDenied.SubnetRouteV1Exist | The operation is not allowed because of existing subnetRouteV1. | The operation is not allowed because the subnet routes in the VPC do not meet the specifications. | diagnosis |
| 400 | OperationDenied.SwitchToSystemRouteTable | The associated route tables cannot be directly changed to system route tables. | The associated route table cannot be directly switched to a system route table. | diagnosis |
| 400 | OperationDenied.SystemPrefixList | The status of traffic mirror filter is incorrect. | Operations on operating system prefix lists are not allowed. | diagnosis |
| 400 | OperationDenied.SystemPrefixList | The operation is not allowed because of SystemPrefixList. | Operations on operating system prefix lists are not allowed. | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportBondEni | Operation denied because of target type can not be Bond Network Interface. | Bond elastic network interfaces (ENIs) are not supported as traffic mirror destinations. | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportGatewayLoadBalancerEndpoint | Operation denied because of target type can not be GatewayLoadBalancerEndpoint. | Gateway Load Balancer (GWLB) endpoints are not supported as a traffic mirror destination. | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportSourceType | The traffic mirroring target does not support the type of the traffic mirroring source. | The traffic mirror destination does not support the specified traffic mirror source type. | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportTrafficMirrorFullPacket | The traffic mirror session target type does not support the feature of mirroring source full packet. | The destination type of the current traffic mirror session does not support the full packet mirroring feature. | diagnosis |
| 400 | OperationDenied.TerminateVirtualPhysicalConnection | The operation is not allowed because of TerminateVirtualPhysicalConnection. | The operation is not allowed because the VirtualPhysicalConnection does not have the required permissions or has an overdue payment. | diagnosis |
| OperationDenied.TooManyDataQueried | Specified operation is denied as too many data to return. | The number of data entries to be returned has reached the upper limit. | diagnosis | |
| 400 | OperationDenied.TrafficMirrorSessionSourceFullPacketNotSupport | The traffic mirror session does not support the feature of mirroring source full packet. | Traffic mirroring does not currently support the full packet mirroring feature. TrafficMirrorSourceTruncateMode can only be set to 0, which is the default mode. | diagnosis |
| 400 | OperationDenied.TrAttachmentIpv6Disabled | The operation is not allowed because tr attachment Ipv6 is disabled. | The TR attachment does not have IPv6 enabled. | diagnosis |
| 400 | OperationDenied.Unauthorized | The operation is not allowed because the user is not in the whitelist. | The operation is not allowed because the user is not in the whitelist. | diagnosis |
| 400 | OperationDenied.UneffectiveChargeOrderExisted | The current operation is not allowed because there is an uneffective change order in your account. | The operation is not allowed because your account has a pending specification change order that has not taken effect. | diagnosis |
| 400 | OperationDenied.UnexpectedRouteTable | Operation is denied because only system route table supports publishing route entries. | The operation is denied because only system route tables support routing publication. | diagnosis |
| 400 | OperationDenied.UnsupportedEipBindMode | The operation is not supported for the NAT gateway due to its EIP binding mode. | The EIP bindng type of this NAT gateway does not support this operation. | diagnosis |
| 400 | OperationDenied.UnsupportedTargetType | Traffic mirror target must be SLB if traffic mirror sources contain nat gateway network interface. | When the traffic mirror source contains a NAT gateway network interface controller (NIC), the traffic mirror destination must be of the SLB type. | diagnosis |
| 400 | OperationDenied.UnsupportedTargetType | The operation is not allowed because the target type is not supported. | The operation is denied because the route publish target type is not currently supported. | diagnosis |
| 400 | OperationDenied.UpdateGatewayRouteEntry | The operation is not allowed because of need switch to local first. | Failed to modify the gateway route entry. The next hop must first be changed to a local route before a custom next hop can be specified. | diagnosis |
| 400 | OperationDenied.UseGatewayRouteEntryQueryInterface | Use listGatewayRouteTableEntries to describe gateway route entries. | To query route entries in a gateway route table, use the listGatewayRouteTableEntries operation. | diagnosis |
| 400 | OperationDenied.VBRAssociateVPconn | The operation is not allowed because of VBRAssociateVPconn. | The Virtual Border Router (VBR) is not allowed to be associated with a Vpconn. | diagnosis |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | The operation cannot be performed because the Virtual Border Router is loading or unloading an Express Connect Router (ECR). Try again later. | diagnosis |
| 400 | OperationDenied.VbrIdle | The operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state. | The operation is denied because the next hop of the route entry to be added is a router interface (RI) whose peer is a VBR type and cannot be in an idle state. | diagnosis |
| 400 | OperationDenied.VbrMisMatchCloudBox | The operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added. | The operation is denied because the route table is associated with a CloudBox vSwitch and cannot add route entries pointing to other CloudBox VBRs. | diagnosis |
| 400 | OperationDenied.VpcExistIpv4Gateway | An IPv4 gateway already exists in the VPC. | An IPv4 gateway cannot be created because the VPC already has an IPv4 gateway. | diagnosis |
| 404 | OperationDenied.VpcIpv4GatewayEnabled | The operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway. | The operation is not allowed because the VPC of the NAT gateway already has an IPv4 gateway enabled. | diagnosis |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | The operation is denied because the VPC does not have IPv6 enabled. | diagnosis |
| 400 | OperationDenied.VPconn | The operation is not allowed because of VPconn. | The Vpconn type does not support this operation. | diagnosis |
| 400 | OperationDenied.VPconn | Vpconn is forbidden to create vbr for another account. | Shared Express Connect circuits are not allowed to create VBRs for other accounts. | diagnosis |
| 400 | OperationDenied.VpconnVBRAssociatePconn | The operation is not allowed because of VpconnVBRAssociatePconn. | The operation failed because the VBR of a Vpconn is not allowed to be associated with a Pconn. | diagnosis |
| 400 | OperationDenied.VpcPeerExist | The operation is not allowed because the VPC peer exists. | The operation is denied because the VPC has peering connections. | diagnosis |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because the VpcPeer exists. | The operation is denied because VPC peering connections exist in the VPC. | diagnosis |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because of VpcPeerExists. | The operation is denied because VPC peering connection instances exist in the VPC. | diagnosis |
| 400 | OperationDenied.VpnConfiguring | The associated VPN gateway is being configured. You cannot update the attributes of the customer gateway. | The associated VPN gateway is being configured. The customer gateway configuration cannot be modified. | diagnosis |
| 400 | OperationDenied.VpnExist | The operation is not allowed because of existing vpn. | An IPv4 gateway cannot be created because the VPC already has a VPN gateway. | diagnosis |
| 400 | OperationDenied.VpnFinancialLocked | The associated VPN gateway is financially locked. You cannot update the attributes of the customer gateway. | The associated VPN gateway has a financial lock. The customer gateway configuration cannot be modified. | diagnosis |
| 404 | OperationFailed.AccessDeviceDisabled | Access device is disabled and can not create vbr. | The access device is disabled. A VBR cannot be created. | diagnosis |
| 500 | OperationFailed.AccessTunnelId | AccessTunnelId param do operation failed. | The VPC NAT gateway failed to generate a tunnel ID. Try again later. | diagnosis |
| 400 | OperationFailed.ActiveNetworkInterfaceNotFound | No active network interface is found on the attachment. | No available network interface controllers (NICs) exist on the attachment. | diagnosis |
| 400 | OperationFailed.AddIpTaskInProcessing | Operation failed because add ip to common bandwidth task in processing. | An EIP is being added to the Internet Shared Bandwidth instance. Deletion is not allowed. | diagnosis |
| 400 | OperationFailed.AddressAlreadyAllocated | The operation is failed because of AddressAlreadyAllocated. | The specified address has already been allocated. | diagnosis |
| 400 | OperationFailed.AddressNotInVSwitchCidr | The operation is failed because of %s. | The specified IP address is not within the CIDR block of the vSwitch. Modify the parameter as described in the metric description of the API documentation and retry. | diagnosis |
| 400 | OperationFailed.AddVpcRoute | It is failed to add VPC route after this operation. | Failed to add a VPC route after this operation. | diagnosis |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc_flowlog_public has no group cloud product label, and users within the group are not allowed to purchase. | The vpc_flowlog_public product does not have the internal cloud migration tag and cannot be purchased by internal users. | diagnosis |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc trafficmirror public has no group cloud product label, and users within the group are not allowed to purchase. | The vpc_trafficmirror_public product does not have the internal cloud migration tag and cannot be purchased by internal users. | diagnosis |
| 400 | OperationFailed.AllocateEipSegment | Operation failed because eip segment is out of stock. | The inventory of contiguous EIPs is insufficient. | diagnosis |
| 400 | OperationFailed.AllocateNatIpPortFailed | NatIpPort allocation failed. | Failed to allocate the frontend port. | diagnosis |
| 400 | OperationFailed.AllocateUnfamiliarIp | The operation failed because only IP addresses used within the last seven days can be allocated. | The specified EIP request only allows you to request an IP address that was used within the last 7 days. | diagnosis |
| 400 | OperationFailed.AlreadyUsedIpContained | The specified VSwitchCidrReservationCidr cannot contain already used IP addresses. | The specified reserved CIDR block cannot contain IP addresses that are already in use. | diagnosis |
| 400 | OperationFailed.AnotherAssociationExist | The VPN gateway has associated with %s. | The current VPN instance is already associated with a certificate of the same type. | diagnosis |
| 400 | OperationFailed.AnyPortConfig | Operation failed because any port correspondence any protocol | The operation failed. A conflict exists with other entries because any port or any protocol type is specified. | diagnosis |
| 400 | OperationFailed.AssociationExist | The association already exists. | The operation failed because the current resource is being associated. | diagnosis |
| 400 | OperationFailed.AssociationExist | Operation failed because the existence of an association. | The operation failed because an association exists. | diagnosis |
| 400 | OperationFailed.AttachmentExist | The current VPC is already attached to a DHCP options set. | The current VPC is already attached to a DHCP options set instance. You cannot attach another instance. | diagnosis |
| 400 | OperationFailed.AttachmentNotExist | The current VPC is not attahced to a DHCP options set. | The current VPC is not attached to a DHCP options set instance. The replacement operation is not allowed. | diagnosis |
| 400 | OperationFailed.BandwidthExceedLimit | The operation is forbidden because of BandwidthExceedLimit. | The operation is prohibited because the specified bandwidth exceeds the upper limit. | diagnosis |
| 400 | OperationFailed.BandwidthOrVlanIdEmpty | The specified VBR bandwidth or VlanId is empty. | The bandwidth or VLAN ID of the selected Virtual Border Router (VBR) is empty. | diagnosis |
| 400 | OperationFailed.BandwidthPackageNotEmpty | Eip bandwidth package not empty. | The Internet Shared Bandwidth instance cannot be deleted because it still contains EIPs. | diagnosis |
| 500 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | Your basic information is incomplete. Complete the information first. | diagnosis |
| 400 | OperationFailed.BasicInfoUncompleted | You have not completed your basic personal information, please complete the information and try again. | Your personal basic information is incomplete. Complete sign-up and try again. | diagnosis |
| 400 | OperationFailed.BgpGroupLocalAsnMustSameEachOther | VBR bgpGroup local asn must same each other. | The BGP group AS numbers of VBRs in the failover group must be consistent with each other. | diagnosis |
| 400 | OperationFailed.BgpPeerConflictWithECR | The BGP neighbor created by the previous VBR conflicts with the ECR configuration. | The BGP neighbor already created on the current VBR conflicts with the ECR configuration. Delete the BGP configuration and try again. | diagnosis |
| 400 | OperationFailed.BondingVpnNotSupportBGP | The architecture does not support BGP capabilities (single tunnel bonding architecture VPN gateway). | The architecture does not support BGP capabilities (single-tunnel bonding architecture VPN gateway). | diagnosis |
| 400 | OperationFailed.CannotConnectOtherOwnerInstance | Can not connect with other owner VPC or CEN. | Failed to associate the current resource with a VPC or CEN instance of another account. Verify that you have the required permissions and try again. | diagnosis |
| 400 | OperationFailed.CanNotUseEipInDnat | Operation failed because the EIP cannot be used to create a forward entry. | The operation failed. The EIP cannot be used for DNAT creation. | diagnosis |
| 400 | OperationFailed.CenLevelNotSupport | When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP. | BGP cannot be enabled on the VPN gateway when the VPC to which the VPN gateway belongs has joined a Cloud Enterprise Network (CEN) instance with route synchronization enabled. | diagnosis |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | The routing CIDR block has a route conflict with an existing prefix list route. | diagnosis |
| 400 | OperationFailed.CidrCountExceedMaxCount | The operation is failed because of cidrCountExceedMaxCount. | The number of CIDR blocks specified exceeds the maximum allowed value of cidrMaxCount. | diagnosis |
| 400 | OperationFailed.CidrInUse | Operation failed because cidr is in use. | The CIDR block is currently in use. | diagnosis |
| 400 | OperationFailed.CidrInUse | The operation failed because the CIDR block is already in use. | The operation failed. The CIDR block is currently in use. | diagnosis |
| 400 | OperationFailed.CidrNotEnoughInVSwitch | No enough cidr to allocate in this vswitch. | The specified vSwitch does not have sufficient CIDR blocks to allocate a CidrReservation. | diagnosis |
| 400 | OperationFailed.ClearAuthKeyForbidden | The specific auth key is not empty. | The specified key is not empty and cannot be cleared. | diagnosis |
| 400 | OperationFailed.CommodityCodeInvalid | Invalid CommodityCode. | The commodity code is invalid. Modify it and try again. | diagnosis |
| 400 | OperationFailed.ConfigSessionLog | Failed to configure the NAT session log delivery rule. | Failed to configure the NAT session log delivery rule. | diagnosis |
| 500 | OperationFailed.ConfigSessionLog | Failed to configure session log due to a temporary failure of the server. | Failed to configure session logs due to an internal service error. | diagnosis |
| 400 | OperationFailed.ConflictWithEntry | The CidrBlock is conflict with routeEntry. | The operation failed. The new CIDR block has a route conflict with an existing routing entry. | diagnosis |
| 400 | OperationFailed.ContainForbiddenLabel | There is a label that prohibits ordering, please contact your distributor for processing. | An order-blocking tag exists. Contact your reseller to resolve this issue. | diagnosis |
| 400 | OperationFailed.CreateNatIpCidrInVpcCidrBlock | NAT CIDR blocks cannot be created in VPC CIDR blocks. | The operation failed because the NatIpCidr was created within the VPC CIDR block. | diagnosis |
| 400 | OperationFailed.CreateNatIpCidrNotInUserCidr | The operation is failed because of Creating NatIpCidr not in UserCidr. | The operation failed because the NatIpCidr is not within the UserCidr. | diagnosis |
| 400 | OperationFailed.CreditPayInsufficientBalance | Your account does not have enough balance. | Your account balance is less than 0. Top up your account and try again. | diagnosis |
| 400 | OperationFailed.DefaultNatIp | The operation is failed because of default NatIP can not be deleted. | The operation failed because the default NatIP cannot be deleted. | diagnosis |
| 400 | OperationFailed.DefaultNatIpCidr | The operation is failed because of default NatIPCidr can not be deleted. | The operation failed because the default NatIPCidr cannot be deleted. | diagnosis |
| 400 | OperationFailed.DefaultVpcExist | A default VPC already exists in the region. | The operation failed because the default VPC already exists. | diagnosis |
| 400 | OperationFailed.DefaultVpcNotExist | Operation failed because the default VPC does not exist. | The operation failed because the default VPC does not exist. | diagnosis |
| 400 | OperationFailed.DefaultVSwitchExist | A default vSwitch already exists in the zone. | A default vSwitch already exists in the current zone. | diagnosis |
| 400 | OperationFailed.DescribeCenRoute | An error occurred while querying the CEN route entry. | An error occurred while querying CEN routes. | diagnosis |
| 400 | OperationFailed.DistibuteLock | The resource is locked and cannot be operated. | The resource is locked and operations are not allowed. | diagnosis |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | The operation is locked by another request. | diagnosis |
| 400 | OperationFailed.DnatInMiddleStatus | Operation failed because the status of the DNAT entry associated with the NAT gateway is abnormal. | The operation failed because the DNAT rule status of the NAT gateway is abnormal. | diagnosis |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than 64 | The number of port range mappings for a single IP address in a DNAT entry must be less than 64. | diagnosis |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than limit | The number of port range mappings for a single IP address in a DNAT entry exceeds the limit. | diagnosis |
| 400 | OperationFailed.DnatPortRangeLimit | The maximum number of port ranges that can be specified is exceeded. | The number of port ranges exceeds the limit. | diagnosis |
| 400 | OperationFailed.DnatQuotaExceed | Operation failed because the maximum number of forward entry is exceeded. | The operation failed because the number of DNAT entries is too large. | diagnosis |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | Operation failed because the opposite type of the router interface is invalid for ECMP configuration. | The operation failed because the peer type of the router interface is invalid for ECMP. | diagnosis |
| 400 | OperationFailed.EcsMetricNotEnabled | The feature is not enabled for enhanced NAT gateway. | This feature is not enabled for the enhanced NAT gateway. | diagnosis |
| 500 | OperationFailed.EcsMigrating | The operation is failed because of ECS is migrating. | The bindng operation failed because the ECS instance is being migrated. | diagnosis |
| 400 | OperationFailed.EcsNetworkInterfaceQuotaNotSatisfy | ECS network interface quota is not satisfy. | The network interface controller (NIC) quota of the ECS instance does not meet the requirements. | diagnosis |
| 500 | OperationFailed.EipBindModeConflict | Eips can not bind Eni with NAT mode and MULTI_BINDED mode at the same time. | An EIP cannot be associated with an ENI in both NAT mode and multi-EIP to ENI mode. | diagnosis |
| 400 | OperationFailed.EipBoundOnInstance | The operation is failed because of eip is bounded on instance. | The instance cannot be deleted because an EIP is associated with it. | diagnosis |
| 400 | OperationFailed.EipInMiddleStatus | Operation failed because the status of EIP associated with the specified NAT gateway is abnormal. | The operation failed because the status of the EIP associated with this NAT gateway is abnormal. | diagnosis |
| 400 | OperationFailed.EipStatusInvalid | Operation failed because eip instance status invalid. | The operation failed because the EIP instance status is invalid. | diagnosis |
| 400 | OperationFailed.Endpoint | Operation failed because the RegionId is unavailable in this endpoint. | The region does not belong to the service registration endpoint management. | diagnosis |
| 500 | OperationFailed.EnhancedCheckInventory | The NAT gateway in the current zone is not in service, or the resource inventory is insufficient. | The NAT gateway service is not available in the current zone, or the underlying resources are insufficient. | diagnosis |
| 400 | OperationFailed.EnhancedInventoryNotEnough | The enhanced NAT gateway inventory is insufficient in the specified zone. | The inventory of enhanced NAT gateways in the current zone is insufficient. | diagnosis |
| 400 | OperationFailed.EnhancedQuotaExceed | Operation failed because the maximum number of enhanced NAT gateways in the same VPC is exceeded. | The operation failed because the number of enhanced NAT gateways in the current VPC exceeds the limit. | diagnosis |
| 400 | OperationFailed.EnhancedQuotaExceed | Enhanced nat gateway per vpc quota is exceeded | The quota for creating enhanced NAT gateways in the current VPC has been exceeded. | diagnosis |
| 400 | OperationFailed.EnhancedRegion | Operation failed because enhanced NAT gateways are not available for sale in the specified region. | The operation failed because the enhanced NAT gateway is not available for sale in the current region. | diagnosis |
| 400 | OperationFailed.EnhancedUserIsUnAuthorized | Operation failed because the user is not authorized to create an enhanced NAT gateway. | The operation failed because the user is not authorized to create enhanced NAT gateways. | diagnosis |
| 400 | OperationFailed.EniTypeNotSupport | Operation failed because the ENI type is not supported. | The type of the secondary ENI does not support this operation. | diagnosis |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | You have reached the maximum purchase limit. | diagnosis |
| 400 | OperationFailed.ExistIPv6Used | The operation is failed because of some ipv6 in the ipv6 prefix is already in use. | The operation failed because an IPv6 address in the IPv6 prefix is already in use. | diagnosis |
| 400 | OperationFailed.FailToGetStatus | The operation is failed because of FailToGetStatus. | Failed to retrieve the status of the Express Connect resource. Verify the resource information and try again. | diagnosis |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | The operation failed. Only custom route entries support filtering by route entry ID or route entry name. | diagnosis |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | The operation failed. Only custom route entries support filtering by route entry ID or route entry name. | diagnosis |
| 400 | OperationFailed.FinancialLocked | The operation is forbidden because of financialLocked. | The operation failed due to an overdue payment. | diagnosis |
| 400 | OperationFailed.ForwardEntryNotAllowSrcIpEqualDstIp | The source IP of forward entry is not allowed to equal destination IP. | The public IP address in a DNAT entry cannot be the same as the private IP address. | diagnosis |
| 500 | OperationFailed.GetEniInfo | The back-end service failed to query the NIC information. | The backend service failed to query ENI information. | diagnosis |
| 400 | OperationFailed.GetNfvServiceList | The operation is failed because of get nfv serviceList failed. | The operation is not allowed because the NFV service list failed to be retrieved. | diagnosis |
| 400 | OperationFailed.HavipBoundPortmap | Operation failed because Havip instance already bound portmap. | The operation failed because the HaVip instance is already associated with a port mapping. | diagnosis |
| 400 | OperationFailed.HcForInvalidRiType | Healthchecksourceip and healthchecktargetip is only valid for vr ri that is connected to vbr. | The health check IP address is invalid. | diagnosis |
| 400 | OperationFailed.InformationIncomplete | Your information is incomplete. | The input information is incomplete. | diagnosis |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | The specified instance does not exist in the current VPC. | diagnosis |
| 400 | OperationFailed.InstanceNotExist | The ECS instance does not exist, or is not a VPC VM. | Failed to associate the EIP with the ECS instance because the ECS instance does not exist or is not a VPC instance. | diagnosis |
| 400 | OperationFailed.InstanceStatusNotAllowed | The current status of the resource does not support this operation. | The current status of the resource does not support this operation. | diagnosis |
| 400 | OperationFailed.InternalError | The request processing has failed due to some unknown error. | An unknown error occurred. Retry the operation. If the error persists, submit a ticket. | diagnosis |
| 400 | OperationFailed.InternetBandwidthAlreadyExisted | The operation is failed because of %s. | The specified IPv6 instance already has Internet bandwidth enabled. Do not enable it again. | diagnosis |
| 400 | OperationFailed.InternetBandwidthNonExist | The operation is forbidden because of InternetBandwidthNonExist. | The operation is prohibited because the specified bandwidth instance does not exist. | diagnosis |
| 400 | OperationFailed.InternetBandwidthUnstable | The operation is forbidden because of InternetBandwidthUnstable. | The operation is prohibited because the bandwidth instance is in a transient state. | diagnosis |
| 400 | OperationFailed.InvalidCidrBlock | Operation failed because the specified network block is invalid. | The CIDR block is invalid. | diagnosis |
| 400 | OperationFailed.InvalidEcGrant | The VBR have no grant to create EC. | The Virtual Border Router (VBR) instance is not authorized by the VPC instance. Authorize the VBR and try again. | diagnosis |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because Ecmp routeEntry has more than one ri entry and can only support one non-ri entry. | Failed to create the route entry because Equal-Cost Multipath Routing (ECMP) routes support only one non-RI type as the next hop. | diagnosis |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because the specified nexthopType is invalid. | The operation failed because the next hop type is invalid. | diagnosis |
| 400 | OperationFailed.InvalidStatus | Route entry is not allowed to operate in current status. | The operation on this route entry is prohibited in the current state. | diagnosis |
| 400 | OperationFailed.IpIsLocked | The operation is failed because of ip is locked. | The request failed because the IP address is locked. | diagnosis |
| 400 | OperationFailed.IpPrefixConflict | The operation failed due to the IP prefix of the ENI. | The current operation conflicts with the IP prefix of the network interface controller (NIC). | diagnosis |
| 400 | OperationFailed.IpPrefixMustInVSwitchCidrReservation | The specified ip prefix must in reserved segment the VSwitch. | The specified prefix CIDR block must be within the reserved CIDR block for a vSwitch. | diagnosis |
| 400 | OperationFailed.IPsecServerExist | An IPsec server already exists in the VPN gateway. | An IPsec server already exists in the VPN gateway. | diagnosis |
| 400 | OperationFailed.Ipv4GatewayNotOpenedInVpc | The operation is failed because Ipv4Gateway is not opened in Vpc. | Failed to associate the EIP with the IP address because the IPv4 gateway is not enabled for this VPC. | diagnosis |
| 400 | OperationFailed.Ipv4GatewayUsedByEipBindIpAddress | Failed to delete the IPv4 gateway because the EIP associated with a private IP address requires the IPv4 gateway to implement outbound Internet access. | An EIP is associated with a private IP address for public network access. This feature depends on the IPv4 gateway. The IPv4 gateway cannot be deleted. | diagnosis |
| 400 | OperationFailed.Ipv6AddressAlreadyAllocated | The operation is failed because of Ipv6AddressAlreadyAllocated. | The specified address has already been allocated. | diagnosis |
| 400 | OperationFailed.IPv6AddressAlreadyAllocated | The operation is failed because of the ipv6 address specified was allocated. | The specified IPv6 address has already been assigned. | diagnosis |
| 400 | OperationFailed.Ipv6AlreadyEnabled | Operation failed because the IPv6 is enabled already. | The operation failed because IPv6 is already enabled. | diagnosis |
| 400 | OperationFailed.Ipv6BandwidthExceedLimit | Operation failed because the IPv6 bandwidth is beyond the limits of IPv6Gateway spec to modify. | The operation failed because the bandwidth of the IPv6 instance exceeds the maximum bandwidth limit of the target gateway specification. | diagnosis |
| 400 | OperationFailed.Ipv6CidrBlockExisted | Operation failed because the specified IPv6 CIDR block is used already. | The operation failed because the specified IPv6 CIDR block is already in use. | diagnosis |
| 400 | OperationFailed.Ipv6CidrBlockOverLapped | The input IPv6 CIDR block overlaps with the existing ones. | The specified IPv6 CIDR block overlaps with an existing CIDR block. | diagnosis |
| 400 | OperationFailed.Ipv6CidrBlockUsed | Operation failed because the specified IPv6 CIDR block is used already. | The operation failed because the specified IPv6 CIDR block is already in use. | diagnosis |
| 400 | OperationFailed.IPv6CidrNotReserved | The IPv6 CIDR block is not reserved. | The operation failed because the specified IPv6 CIDR block is not reserved. | diagnosis |
| 400 | OperationFailed.IPv6Disabled | Operation failed because IPv6 is not enabled for the vSwitch. | The operation failed because the IPv6 feature is not enabled. | diagnosis |
| 400 | OperationFailed.Ipv6EgressRuleExisted | An egress-only rule already exists for the IPv6 address. | An IPv6 egress-only rule already exists for this IPv6 instance. | diagnosis |
| 400 | OperationFailed.Ipv6Gateway | The operation is failed because of ipv6Gateway is in use. | The operation failed because the IPv6 gateway is still in use. | diagnosis |
| 400 | OperationFailed.Ipv6GatewayDisMatchIpv6Address | The operation is failed because of %s. | The specified IPv6 address and IPv6 gateway are not in the same VPC. Verify your input. | diagnosis |
| 400 | OperationFailed.Ipv6GatewayInUse | The IPv6 gateway is in use. | The VPC attributes cannot be modified because the IPv6 gateway is still in use. | diagnosis |
| 400 | OperationFailed.Ipv6GatewayNotExist | The operation is failed because of %s. | No IPv6 gateway instance exists in the VPC of the specified IPv6 address. Create an IPv6 gateway before performing this operation. | diagnosis |
| 400 | OperationFailed.Ipv6InstanceExist | Operation failed because vswitch has ipv6 instance. | IPv6 instances exist in the vSwitch. | diagnosis |
| 400 | OperationFailed.Ipv6RouteEntryUsing | VPC exist IPv6 Route Entry, cannot disable IPv6. | IPv6 routing entries exist in the VPC. Shutdown of IPv6 is prohibited. | diagnosis |
| 400 | OperationFailed.IpV6VSwitchInuse | Operation failed because some vswitch ipv6 is in use. | The IPv6 vSwitch is still in use. | diagnosis |
| 400 | OperationFailed.LastTokenProcessing | A token request is being processed. Try again later. | The previous token request is being processed. Try again later. | diagnosis |
| 400 | OperationFailed.LogDeliveryIsUnAuthorized | Operation failed because the user is not authorized to deliver NAT session log. | The operation failed because you have not authorized the NAT session log delivery permission. | diagnosis |
| 400 | OperationFailed.MissCertificate | The VPN gateway has not associated any certificates. | The VPN gateway is not associated with any certificate. | diagnosis |
| 400 | OperationFailed.MissCertificate | The VPN connecton has not associated any certificates. | The current VPN connection is not associated with any certificate. | diagnosis |
| 400 | OperationFailed.ModifyVpcDnsHostname | Operation failed because DnsHostName resource is in transient state, please try again later. | The DNS domain name resource is in a transient state. Try again later. | diagnosis |
| 400 | OperationFailed.NatArchitectrueNotMatch | The operation is not supported because the NAT instance architecture does not match. | The operation is not supported because the NAT instance architecture does not match. | diagnosis |
| 400 | OperationFailed.NatGatewayNotExist | The specified NatGateway does not exist. | The operation failed because the NAT gateway does not exist. | diagnosis |
| 400 | OperationFailed.NatGwBandwidthQuotaExceed | The total bandwidth of the EIP bound to the NAT gateway exceeds the quota. | The operation failed because the total bandwidth of EIPs associated with the NAT gateway exceeds the limit. | diagnosis |
| 400 | OperationFailed.NatGwBindWithBandwidthPackage | Operation failed because the NAT gateway is bound to bandwidth packages. | The operation failed because the NAT gateway instance is associated with a NAT service plan. | diagnosis |
| 400 | OperationFailed.NatGwRouteInMiddleStatus | Operation failed because the status of the route entry associated with the NAT gateway is abnormal. | The operation failed because the route entry associated with the NAT gateway is in an abnormal state. | diagnosis |
| 400 | OperationFailed.NatTypeInvalid | Only enhanced NAT gateway supports the operation. | Only enhanced NAT gateways support this operation. | diagnosis |
| 400 | OperationFailed.NatTypeNotEnhanced | Operation failed because the specified NAT gateway type is not enhanced. | The operation failed because the specified NAT gateway is not of the enhanced type. | diagnosis |
| 400 | OperationFailed.NoAvailableAmount | The available amount of your account is less than 0, please recharge before attempting to purchase. | Your account balance is less than 0. Top up your account and try again. | diagnosis |
| 400 | OperationFailed.NoAvailableResource | The Zone have no available resource. | No resources are available in the region. | diagnosis |
| 400 | OperationFailed.NoInternetBandwidth | Operation failed because the ipv6 instance has no internet bandwidth. | The operation is not supported because the IPv6 instance does not have Internet bandwidth. | diagnosis |
| 400 | OperationFailed.NoNameAuthentication | You have not passed the real name authentication and do not meet the purchase conditions. Please log in to the user center for real-name authentication. | You have not completed real-name verification and are not eligible to make purchases. Log on to the Account Center to complete real-name verification. | diagnosis |
| 400 | OperationFailed.NoPaymentMethod | No payment method is specified for your account. | No valid payment method exists in the account. | diagnosis |
| 400 | OperationFailed.NoPermission | You are not authorized to perform the operation. | You do not have the permission to perform this operation. | diagnosis |
| 400 | OperationFailed.NoRamPermission | Vpn Service has no permission to operate your IDaaS instances. | The VPN service does not have the permission to operate on your IDaaS instance. | diagnosis |
| 400 | OperationFailed.NormalInventoryNotEnough | Operation failed because the inventory of standard NAT gateway is insufficient. | The operation failed due to insufficient inventory of standard NAT gateways. | diagnosis |
| 500 | OperationFailed.NormalInventoryNotEnough | Standard NAT gateways are no longer offered. You can create enhanced NAT gateways and set the correct natType. | Standard NAT gateways are no longer supported. Create an enhanced NAT gateway and make sure the NatType parameter is correctly configured. | diagnosis |
| 400 | OperationFailed.NotConsistentWithVpconn | VBR bandwidth is not consistent with vpconn | The bandwidth value of the Virtual Border Router does not match the bandwidth value of the shared Express Connect circuits it belongs to. | diagnosis |
| 400 | OperationFailed.NotConsistentWithVpconn | The operation is failed because of NotConsistentWithVpconn. | Modifying the bandwidth specification of a Virtual Border Router created on a shared port is not supported. | diagnosis |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is failed because of association not exist. | The operation failed because the specified reference relationship does not exist in the prefix list. | diagnosis |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is not failed because of not exist this associate relation. | The operation to disassociate the route table from the gateway failed because no association exists. | diagnosis |
| 400 | OperationFailed.NotSupportBizType | The specified instance type does not support the operation. | The operation failed because the specified instance type does not support this operation. | diagnosis |
| 400 | OperationFailed.NotSupportIPV6 | The specified next hop does not support IPv6. | The specified next hop does not support IPv6. | diagnosis |
| 400 | OperationFailed.NotSupportIPv6 | Router interface not support IPv6. | The router interface does not support IPv6. | diagnosis |
| 400 | OperationFailed.OpenCdtServiceFirst | The operation is failed because of %s. | The specified billing type requires Cloud Data Transfer (CDT) to be activated. Activate CDT and try again. | diagnosis |
| 400 | OperationFailed.OperateShareResource | This is not allowed to operate shared prefixList. | You cannot operate on a shared prefix list. | diagnosis |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | The next hop instance of the route is in a maintenance-locked state and cannot be operated on. | diagnosis |
| 400 | OperationFailed.OperationLocked | Operation failed because OperationLocked. | The operation failed because the instance is already locked for maintenance. | diagnosis |
| 400 | OperationFailed.PconnAllocateVlan0 | Vlan 0 Vbr cannot share the physical connection with another Vbr. | VLAN 0 on the Express Connect circuit cannot coexist with other Virtual Border Routers. | diagnosis |
| 400 | OperationFailed.PconnExistVlan0Vbr | The physical connection has VLAN 0 VBR. You cannot create another VBR. | A VLAN 0 Virtual Border Router already exists on the Express Connect circuit. You cannot create other Virtual Border Routers. | diagnosis |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation is failed because of PconnTrafficNotEnable. | The operation failed because outbound traffic is not enabled. | diagnosis |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation failed because Outbound Data Transfer service is not activated. | The operation failed because the outbound cloud traffic service is not activated. | diagnosis |
| 400 | OperationFailed.PeerAsnCannotEqualsLocalAsn | Peer ASN is illegal, peer ASN cannot equals to local ASN. | When adding a BGP group, the peer autonomous system number cannot be the same as the local autonomous system number. Verify the parameters and try again. | diagnosis |
| 400 | OperationFailed.PhysicalConnectionFinancialLocked | Update failed, the physical connection is financial locked. | The shared port is in a financial lock state. You cannot modify the VLAN. | diagnosis |
| 400 | OperationFailed.PhysicalConnectionTerminated | Update failed, the physical connection is terminated. | The shared port is in a terminated state. You cannot modify the VLAN. | diagnosis |
| 400 | OperationFailed.PrivateIpAddressNotExist | The operation failed because the PrivateIpAddress is not found. | The specified private IP address does not exist. | diagnosis |
| 400 | OperationFailed.PrivateLinkMode | The NAT gateway is not support to change PrivateLinkMode. | The current NAT gateway does not support modifying PrivateLinkMode. | diagnosis |
| 500 | OperationFailed.QueryAccountInfo | Query account info failed when create order. | Failed to query account information when placing the order. | diagnosis |
| 400 | OperationFailed.QueryAttachmentInfo | Failed to query attachment information. | Failed to query the attachment information. | diagnosis |
| 400 | OperationFailed.QueryCenEntry | Operation is denied because getting CEN route entry has failed. | The query failed because Cloud Enterprise Network routes are temporarily unavailable. | diagnosis |
| 400 | OperationFailed.QueryCenIpv6Status | Failed to query the IPv6 status of the specified VPC in CEN. | Failed to query the IPv6 status of the VPC in the Cloud Enterprise Network (CEN) instance. | diagnosis |
| 400 | OperationFailed.QueryNetworkInterfaceInfo | Failed to query network interface information. | Failed to query network interface card information. | diagnosis |
| 400 | OperationFailed.QueryOrderError | Failed to query order, error calling trade application. | Failed to query the order. An error occurred when calling the trade application. | diagnosis |
| 400 | OperationFailed.QueryPrice | Query price failed when create order. | Failed to query the price when creating the order. | diagnosis |
| 500 | OperationFailed.QuerySpInfo | query resource by sp error | Failed to query the instance subscription information. | diagnosis |
| 400 | OperationFailed.QuotaExceedPerTimeWindow | The maximum number of scheduled migration within the specified time window is exceeded. | The operation failed because the number of reservations for this time window has reached the upper limit. | diagnosis |
| 400 | OperationFailed.QuotaNotEnough | Your quota is insufficient. Please contact your channel partner to increase your quota | Your current quota is insufficient. Contact your channel partner to increase the quota. | diagnosis |
| 400 | OperationFailed.QuotaNotEnough | Your current quota is insufficient, please contact your channel partner to increase the quota for you. | Your current quota is insufficient. Contact your channel partner to increase the quota. | diagnosis |
| 400 | OperationFailed.RegionDissolved | The operation failed because the region is dissolved. | Alibaba Cloud plans to optimize and adjust the current region. Cloud services in this region will cease operations. To ensure your business continuity and a smooth data migration, you cannot place new purchase orders at this time. Thank you for your understanding and support. | diagnosis |
| 400 | OperationFailed.RegionNotSupport | The specified region does not support the feature. | The current region does not support this feature. | diagnosis |
| 400 | OperationFailed.ReservedCidr | OperationFailed.ReservedCidr | The specified reserved CIDR block does not meet the reservation conditions. | diagnosis |
| 400 | OperationFailed.ResourceInBinding | The operation is failed because of the resource is in binding. | The operation failed because the resource is currently in a bindingstate. | diagnosis |
| 400 | OperationFailed.ResourceIsShared | The operation is failed because of PublicIpAddressPool is shared with other users. | The public IP address pool has been shared with other users and cannot be deleted. | diagnosis |
| 500 | OperationFailed.ResourceNotEnough | Insufficient resources. | The requested resources are insufficient. If you still need to apply, submit a ticket. | diagnosis |
| 400 | OperationFailed.ResourceNotEnough | The resources you have applied for are insufficient. | The requested resources are insufficient. If you still need to apply, submit a ticket. | diagnosis |
| 400 | OperationFailed.ResourceUidNotExist | The operation is failed because of the resource uid does not exist. | The operation failed because the resource UID does not exist. | diagnosis |
| 400 | OperationFailed.RiskControl | Risk control check failed. | A security risk was detected with your payment method. Continue verification through the link in the email or console message, and resubmit the order after verification. | diagnosis |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to another VPN on the same network block. | A route that points to another VPN gateway already exists on the same CIDR block in the VPC route table. | diagnosis |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to a non-RI and non-VPN next hop on the same network block. | A route that points to a resource other than a router interface or VPN gateway already exists on the same CIDR block in the VPC route table. | diagnosis |
| 404 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | The operation failed due to a conflict with an existing route. | diagnosis |
| 400 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the route to create conflicts with the client IP pool of the IPsec server. | The destination CIDR block of the route conflicts with the client CIDR block of the IPsec server. | diagnosis |
| 500 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the specified route conflicts with IPsec server. | The route configuration conflicts with the IPsec server. | diagnosis |
| 400 | OperationFailed.RouteEntryUnstable | The operation is failed because of route entry related to it is unstable, please try later. | The route entries associated with the instance are in a transient state. Try again later. | diagnosis |
| 400 | OperationFailed.SaleValidate | Validate sale condition with subArticle failed. | Failed to verify the sales conditions by using the sub-item. | diagnosis |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | Operation failed because the quota for active route entries in the scope has been exceeded. | The operation failed because the quota for active route entries has been exceeded. | diagnosis |
| 400 | OperationFailed.ScopeActiveRouteEntryType | Operation failed because the type of the active route entry is not supported. | The operation failed because this type of active route is not supported. | diagnosis |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | Operation failed because the quota for standby route entries in the scope has been exceeded. | The operation failed because the quota for standby route entries has been exceeded. | diagnosis |
| 404 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | This operation is not allowed on a managed instance. | diagnosis |
| 400 | OperationFailed.SnatInMiddleStatus | Operation failed because the status of the SNAT entry of the specified NAT gateway is abnormal. | The operation failed because the SNAT entry status of the specified NAT gateway is abnormal. | diagnosis |
| 400 | OperationFailed.SnatIpsTooMany | The maximum number of IP addresses is exceeded in the SNAT pool. | Too many IP addresses exist in the SNAT pool. | diagnosis |
| 400 | OperationFailed.SnatQuotaExceed | Operation failed because the maximum number of SNAT entry is exceeded. | The operation failed because there are too many SNAT entries. | diagnosis |
| 400 | OperationFailed.SslNotSupport | Enable ssl vpn with private networkType is unsupported. | A private VPN gateway does not support enabling the SSL feature. | diagnosis |
| 400 | OperationFailed.StaleBGPRoutes | BGP routes are still there and automatic route propagation cannot be disabled. | BGP routes still exist. Automatic propagation cannot be disabled. | diagnosis |
| 400 | OperationFailed.SyncOrderToSub | SyncOrderToSub error. | The operation failed. | diagnosis |
| 500 | OperationFailed.SyncTradeResource | Resource transaction information synchronization failed | Failed to synchronize the transaction information of the resource. | diagnosis |
| 400 | OperationFailed.SystemBusy | Operation failed because system is busy. | The system is busy. Try again later. | diagnosis |
| 400 | OperationFailed.SystemReservedIpContained | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | diagnosis |
| 400 | OperationFailed.TargetUserPconnTrafficNotEnable | The operation failed because of TargetUserPconnTrafficNotEnable. | The operation failed because the target user has not activated outbound cloud traffic. | diagnosis |
| 400 | OperationFailed.TokenInvalid | Create order failed, because the token is invalid | Failed to create the order because the token is invalid. | diagnosis |
| 400 | OperationFailed.UnpaidBillsExist | The account has unpaid bills. Please pay your overdue bill first. | This account has unpaid orders. | diagnosis |
| 400 | OperationFailed.UpgradeCdtServiceFirst | The operation is failed because of cdt is not upgraded. | The instance type you specified requires a Cloud Data Transfer (CDT) billing upgrade. Upgrade CDT and try again. | diagnosis |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | The VPC still has static routes pointing to the ECR. You cannot dissociate the ECR. | diagnosis |
| 400 | OperationFailed.VbrBandWidthMust0InVlan0Vbr | The operation is failed because of VbrBandWidthMust0InVlan0Vbr. | The operation failed. Bandwidth throttling configuration is not allowed. | diagnosis |
| 400 | OperationFailed.VbrBindedPconn | The operation failed because of VbrBindedPconn. | The operation failed because the VBR is bindded to a physical connection. | diagnosis |
| 400 | OperationFailed.VbrBindedPconn | The operation is failed because of VbrBindedPconn. | The VBR is bindded to a physical connection. | diagnosis |
| 400 | OperationFailed.VbrLocked | The VBR is locked. | The Virtual Border Router is locked. Try again later. | diagnosis |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The operation failed because of VirtualPhysicalConnectionExistVBR. | A VBR already exists for the VirtualPhysicalConnection. | diagnosis |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The virtual physical connect has already created another VBR. | A VBR has already been created for the shared Express Connect circuit. You cannot create another one. | diagnosis |
| 400 | OperationFailed.Vlan0VbrUnSharePconn | VLAN 0 VBR cannot share the physical connection with another VBR. | Another VLAN 0 VBR already exists on this Express Connect circuit. You cannot create a VLAN 0 VBR on this circuit. | diagnosis |
| OperationFailed.VlanIdAlreadyInUse | The specifed vlanId has been used. | The VLAN ID is in use. | diagnosis | |
| 400 | OperationFailed.VlanIdInUse | Operation failed because vlanId is in use. | The specified VLAN ID is already in use. | diagnosis |
| 400 | OperationFailed.VpcIpv6Disabled | Operation failed because the VPC has not enabled IPv6. | The operation is not supported because IPv6 is not enabled for the VPC. | diagnosis |
| 400 | OperationFailed.VpcNotExist | The specified VPC does not exist. | The specified VPC does not exist. | diagnosis |
| 400 | OperationFailed.VpcNotExist | The operation is failed because of vpc is not found. | The operation failed. The VPC was not found. | diagnosis |
| 400 | OperationFailed.Vpconn | The operation is failed because of Vpconn. | The operation on the VirtualPhysicalConnection is not allowed. | diagnosis |
| 400 | OperationFailed.VpconnAttached | Cannot terminate physical connection when vpconn are still attached. | Shared ports still exist. You cannot terminate this physical port. | diagnosis |
| 400 | OperationFailed.VPconnCreated | The operation failed because VPconn is already created. | The VirtualPhysicalConnection already exists. Do not create it again. | diagnosis |
| 400 | OperationFailed.VPconnCreated | The operation is failed because of VPconnCreated. | The VirtualPhysicalConnection cannot be created. | diagnosis |
| 400 | OperationFailed.VpcRoutePropagationDisable | The VPC system routing table does not enable the acceptance of propagated routes. | The VPC system route table does not have route propagation enabled. | diagnosis |
| 400 | OperationFailed.VpcRoutePublishEnabledInECR | VPC supports only one dynamic route learning source at most. Please remove the VPC from ECR. | A VPC supports only one dynamic route learning source. Remove the VPC from the ECR. | diagnosis |
| 400 | OperationFailed.VpcRoutePublishEnabledInTR | A VPC supports at most one dynamic route learning source. In the forwarding router, disable route synchronization for the VPC. | A VPC supports only one dynamic route learning source. Disable route synchronization for this VPC in the transit router. | diagnosis |
| 400 | OperationFailed.VpnConnectionExist | Auto propagate cannot be closed when VPN connections with BGP enabled exist. | Automatic propagation cannot be shutdown when VPN connections with BGP enabled exist. | diagnosis |
| 400 | OperationFailed.VRouterNotExist | Operation failed because the VRouter does not exist. | The operation failed because the vRouter does not exist. | diagnosis |
| 400 | OperationFailed.VswBindedAcl | The operation failed because a network ACL is associated with the specified VSwitch. | The operation failed because the specified vSwitch is associated with a network ACL. | diagnosis |
| 400 | OperationFailed.VswBindedRouteTable | The operation failed because a custom route table that contains subnet routes is associated with the specified VSwitch. | The operation failed because the vSwitch is associated with a subnet route table. | diagnosis |
| 400 | OperationFailed.VswHasAcl | Operation failed because the specified VSwitch is associated with a network ACL. | The operation failed because the specified vSwitch is associated with a network ACL. | diagnosis |
| 400 | OperationFailed.VswHasRouteTable | Operation failed because the specified VSwitch is associated with a route table. | The operation failed because the specified vSwitch is associated with a subnet route table. | diagnosis |
| 400 | OperationFailed.VSwitchCidrReservationCidr | The specified VSwitchCidrReservationCidr conflicts with existed cidr reservation or vswitch cidr. | The specified VSwitchCidrReservationCidr conflicts with an existing VSwitchCidrReservation CIDR block. | diagnosis |
| 400 | OperationFailed.VSwitchIpv6Disabled | The operation is failed because of %s. | IPv6 is not enabled for the specified vSwitch. Enable IPv6 before performing this operation. | diagnosis |
| 400 | OperationFailed.VSwitchNoAvailableIp | Operation failed because the number of available IP addresses of the specified VSwitch is insufficient. | The operation failed because the vSwitch does not have sufficient active IP addresses. | diagnosis |
| 400 | OperationFailed.VSwitchNotFound | The specified vSwitch does not exist. | The specified vSwitch was not found. | diagnosis |
| 400 | OperationFailed.VSwitchNotInVpc | The specified VSwitch and NAT gateway must be in the same VPC. | The vSwitch and the NAT gateway must belong to the same VPC. | diagnosis |
| 400 | OperationFailed.VSwitchStatusError | The vSwitch is creating . | The vSwitch is being created. | diagnosis |
| 400 | OperationFailed.VswNotBelongToVpc | Operation failed because the specified VSwitch is not bound to the same VPC with NAT gateway. | The operation failed because the vSwitch and the NAT gateway do not belong to the same VPC. | diagnosis |
| 400 | OperationFailed.VswNotExist | The specified VSwitch does not exist. | The specified vSwitch does not exist. | diagnosis |
| 400 | OperationFailed.ZoneIdInconsistent | Operation failed because the ZoneId is inconsistent. | The operation is not supported because the zone ID does not match. | diagnosis |
| 400 | OperationUnsupport | Operation is unsupport, not in vbr support custom local asn white list. | The operation is not supported. | diagnosis |
| 400 | OperationUnsupported.AccessDevice | The AccessDevice is not supported. | The operation does not support accessing the AccessDevice. | diagnosis |
| 400 | OperationUnsupported.action | This action is not support. | This operation is not supported. | diagnosis |
| 400 | OperationUnsupported.AdvancedFeature | Advanced features of the vpc is unsupported. | The specified advanced feature is not supported. | diagnosis |
| 400 | OperationUnsupported.AllocateCountTooMuch | %s is unsupported. | The number of allocated IP addresses exceeds the upper limit. Modify the parameters as described in the metric description and retry. | diagnosis |
| 400 | OperationUnsupported.BindMultipleType | You cannot bind HaVip to multiple instance types. | You cannot associate with an ECS instance and a network interface controller (NIC) at the same time. | diagnosis |
| 400 | OperationUnsupported.BindOnFreeNetworkInterface | The network interface must be attached to an ECS instance. | The ENI must be associated with an ECS instance. | diagnosis |
| 400 | OperationUnsupported.BindOnMultipleVswitch | The bound instance and HaVip must be on the same vSwitch. | The associated instance and the HaVip must be in the same vSwitch. | diagnosis |
| 400 | OperationUnsupported.BindOnSameEcs | You cannot bind two network interfaces on the same ECS instance. | You cannot associate two ENIs on the same ECS instance. | diagnosis |
| 400 | OperationUnsupported.BondingNetworkInterface | The specified traffic mirror source is bonding eni without slave. | The current operation does not support a bonding ENI without a slave. | diagnosis |
| 400 | OperationUnsupported.CenIpv6Enabled | The IPv6 feature is enabled in CEN. | The IPv6 feature is already enabled in CEN. | diagnosis |
| 400 | OperationUnsupported.CidrConflict | The specified CIDR block conflicts with an existing SNAT entry. | The specified CIDR block conflicts with an existing SNAT entry. | diagnosis |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | The destination IPv6 CIDR block specified in the route entry overlaps with the vSwitch CIDR block. | diagnosis |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment。 | The destination IPv6 address specified in the route is contained within the vSwitch CIDR block. | diagnosis |
| 400 | OperationUnsupported.DhcpLeaseTime | The DhcpOptionsSet of this region does not support custom LeaseTime. | The DHCP options set in this region does not support custom LeaseTime. | diagnosis |
| 400 | OperationUnsupported.DhcpOptionsSet | The DHCP options set feature in this region is not supported. | The DHCP options set feature is not supported in the current region. | diagnosis |
| 400 | OperationUnsupported.DisableIpv6 | The operation is unsupported because IPv6 is not enabled. | The current operation is not supported because the IPv6 feature is not enabled. | diagnosis |
| 400 | OperationUnsupported.EgressOnlyRuleOnFreeIpv6Instance | Creating ipv6 egress only rule on ipv6 instance that not associated with any resource is unsupported. | Creating an egress-only rule on an IPv6 instance that is not associated with a resource is not supported. | diagnosis |
| 400 | OperationUnsupported.EgressRuleInDefaultSpec | Egress-only rule is not supported. Please update the spec of IPv6 Gateway to Medium or Large. | The free edition IPv6 gateway does not support creating egress-only rules. Upgrade the IPv6 gateway to Enterprise Edition or Enhanced Enterprise Edition. | diagnosis |
| 400 | OperationUnsupported.EgressRuleVSwitch | The specified VSwitch is not supported to create egress-only rule. | The specified region does not support vSwitch-level egress-only rules. | diagnosis |
| 400 | OperationUnsupported.EipInBinding | Create snat entry with eip in associating status is unsupported. | An EIP that is being associated cannot be used to create an SNAT entry. | diagnosis |
| 400 | OperationUnsupported.EipNatBWPCheck | The EIP is not associated with a NAT service plan. | The current EIP does not belong to the NAT service plan. | diagnosis |
| 400 | OperationUnsupported.EipNatGWCheck | Operation is not supported because the relation check of EIP and NAT gateway has failed. | The operation is not supported because the EIP and NAT gateway association verification failed. | diagnosis |
| 400 | OperationUnsupported.EnableBgp | Current version of the VPN does not support enable BGP. | The current VPN version does not support enabling BGP. | diagnosis |
| 400 | OperationUnsupported.EnableBgp | Current region does not support enable BGP. | The current region does not support enabling BGP. | diagnosis |
| 400 | OperationUnsupported.EnhancedCURegion | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | The current region does not support CU-billed enhanced NAT gateways. | diagnosis |
| 400 | OperationUnsupported.EnhancedRegion | Enhanced NAT Gateway is not supported in this region. | The current region does not support enhanced NAT gateways. | diagnosis |
| 400 | OperationUnsupported.FinancialLocked | The operation is forbidden because of financialLocked. | The operation is prohibited due to a financial lock. | diagnosis |
| 400 | OperationUnsupported.ForwardEntry | Duplicated destination ip port is unsupported. | Duplicate destination IP ports are not supported. | diagnosis |
| 400 | OperationUnsupported.FreeIpv6Feature | Free IPv6 feature in this region is unsupported. | The current region does not support allocating unassociated IPv6 address instances. | diagnosis |
| 400 | OperationUnsupported.FreeIpv6PrefixFeature | Free IPv6 prefix feature in this region is unsupported. | The Ipv6Prefix feature is not supported in this region. | diagnosis |
| 400 | OperationUnsupported.FreePrivateIpv6 | This operation does not support free private IPv6 addresses. | Allocating unassociated private IPv6 addresses is not supported. | diagnosis |
| 400 | OperationUnsupported.HavipBindType | You cannot bind HAVIP to network interface in the specified region. | Your region does not support associating ENIs. | diagnosis |
| 400 | OperationUnsupported.IpNotInCbwp | The specified eip not exist in the commonBandwidthPackage. | The EIP does not exist in the NAT service plan. | diagnosis |
| 400 | OperationUnsupported.IpsecPfs | The specified IPsec Pfs is unsupported. | The specified IPsec PFS is not supported. | diagnosis |
| 400 | OperationUnsupported.IPsecServer | The current version of the VPN gateway does not support IPsec server. | The current VPN gateway version does not support the IPsec server. | diagnosis |
| 400 | OperationUnsupported.IpType | The EIP type does not support the operation. | This EIP type cannot be added. | diagnosis |
| 400 | OperationUnsupported.Ipv6CidrBlock | The specified IPv6 CIDR block is unsupported. | The specified IPv6CidrBlock is not supported. | diagnosis |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | The EcmpRouteEntry is not supported for IPv6. | IPv6 does not support ECMP routes. | diagnosis |
| 400 | OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterface | You cannot create IPv6 route entries on a primary network interface. | Creating an IPv6 route with the primary ENI as the next hop is not allowed. | diagnosis |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported in the region. | The current region does not support the IPv6 feature. | diagnosis |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported. | The current operation does not support the IPv6 feature. | diagnosis |
| 400 | OperationUnsupported.IPV6ForThisRegion | This Region do not support IPV6. | The region does not support IPv6. | diagnosis |
| 400 | OperationUnsupported.Ipv6ForVBR | IPv6 route entry is not supported for VirtualBorderRouter. | The Virtual Border Router does not support IPv6 routes. | diagnosis |
| 400 | OperationUnsupported.IPv6ULA | The ULA IPv6 CIDR type is unsupported. | The current operation does not support ULA addresses. | diagnosis |
| 400 | OperationUnsupported.ModifyBandwidth | You cannot modify the bandwidth of the VBR in sale. | The bandwidth of a Virtual Border Router (VBR) that is for sale cannot be changed to a different bandwidth. | diagnosis |
| 400 | OperationUnsupported.ModifyBandwidth | Modify Sale VirtualBorderRouter Bandwidth Unsupported. | The modified bandwidth parameter cannot be saved. | diagnosis |
| 400 | OperationUnsupported.MultipleIpv6Address | Operation unsupported because specific route next hop instance has multiple IPv6 address. | The operation is not supported because the specified route next hop instance is associated with multiple IPv6 addresses. | diagnosis |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | A next hop that is associated with multiple IPv6 addresses cannot be specified. | diagnosis |
| 400 | OperationUnsupported.NatConvert | The NAT gateway conversion function is not supported. | The NAT gateway type conversion feature is not supported. | diagnosis |
| 400 | OperationUnsupported.NATGWBONDINGENI | Operation is unsupported because the specified network interface is created with enhanced NAT gateway. | The operation failed because the associated ENI instance was created by an enhanced NAT gateway. | diagnosis |
| 400 | OperationUnsupported.NormalInventoryNotEnough | Operation is unsupported because the inventory of standard NAT gateway is insufficient. | The operation failed because the inventory of standard NAT gateways is insufficient. | diagnosis |
| 400 | OperationUnsupported.NotPConnOwner | Only the owner of the leased line can update the bandwidth. | Only the Express Connect circuit owner is allowed to update the bandwidth. | diagnosis |
| 400 | OperationUnsupported.OnlyOneIpv6GatewayInVpc | Operation is not supported because a VPC is only allowed to have one IPv6 gateway. | The operation is not supported because a VPC can have only one IPv6 gateway. | diagnosis |
| 400 | OperationUnsupported.OnlySupportNormalNetworkInterface | Next hop only supports binding normal network Interface. | The next hop supports only standard elastic network interface controllers (NICs). | diagnosis |
| 400 | OperationUnsupported.OnlyULA | The IPv6 CIDR type can only be ULA. | Only ULA-type IPv6 addresses are supported. | diagnosis |
| 404 | OperationUnsupported.PayByLcuNatModifySpec | The spec of payByLcu nat is unsupported to modify. | The specification of a NAT gateway that uses the pay-as-you-go billing method cannot be modified. | diagnosis |
| 400 | OperationUnsupported.PrePaid | %s is unsupported. | IPv6 Internet bandwidth does not support subscription billing. Refer to the metric description in the API documentation, modify the parameters, and retry. | diagnosis |
| 400 | OperationUnsupported.PrePaidPyByLcu | The operation failed because the subscription NAT gateway does not support the pay-by-LCU billing method. | Subscription NAT gateway instances do not support the PayByLcu billing method. | diagnosis |
| 400 | OperationUnsupported.PrivateGUA | This operation does not support private GUA addresses. | The current operation does not support private GUA addresses. | diagnosis |
| 400 | OperationUnsupported.PublishPrefixListRouteEntry | Publishing prefix list route entry is unsupported. | Publishing route prefix list routes is not supported. | diagnosis |
| 400 | OperationUnsupported.PublishSystemRouteEntry | Publishing system route entry is unsupported. | Publishing system routes is not supported. | diagnosis |
| 400 | OperationUnsupported.Qos | QoS is unsupported. | The current user is not allowed to create QoS rules. Contact your account manager. | diagnosis |
| 400 | OperationUnsupported.RegionAndServiceLocationNotMatch | Operation is not supported because the region and service location do not match. | The operation is not supported because the region and service area are not supported. | diagnosis |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroup is not supported in this region. | The resource group feature is not enabled. | diagnosis |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroupId in financial region is unsupported. | The operation is not supported. Resource group IDs are not supported in Finance Cloud. | diagnosis |
| 400 | OperationUnsupported.RouterInterfaceExist | Operation failed because the VPC has a router interface. | The operation failed because the VPC has existing router interfaces. | diagnosis |
| 400 | OperationUnsupported.ScopeInvalidRouteType | The specified route type is unsupported. | This route type is not supported. | diagnosis |
| 400 | OperationUnsupported.ServiceManaged | Operation of %s is forbidden because this instance belongs to Service manager. | The operation is not allowed. The instance belongs to a managed resource. | diagnosis |
| 400 | OperationUnsupported.SetDPD | Current version of the VPN does not support setting DPD. | The current VPN gateway version does not support the DPD feature. | diagnosis |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | You cannot set the bandwidth of VBR with multiple physical connections. | Setting bandwidth is not supported for VBRs with multiple physical connections. | diagnosis |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | Set Multi PhysicalConnection Bandwidth Unsupported. | Bandwidth for multiple physical connections is not supported. | diagnosis |
| 400 | OperationUnsupported.SetNatTraversal | Current version of the VPN does not support setting NAT traversal. | The current VPN gateway version does not support the NAT traversal feature. | diagnosis |
| 400 | OperationUnsupported.SkipConstruction | You are not authorized to skip the construction. | You do not have the permission to skip the construction step and proceed to payment. | diagnosis |
| 400 | OperationUnsupported.SkipConstruction | You can not skip construction. | The construction step cannot be skipped to proceed to the next step. | diagnosis |
| 400 | OperationUnsupported.SpecifyIpOnIpv6Entry | You cannot specify the private IP address when you create IPv6 route entries. | The private IP parameter cannot be specified when creating an IPv6 route. | diagnosis |
| 404 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | The system route table cannot be disassociated. | diagnosis |
| 400 | OperationUnsupported.ULA | %s is unsupported. | The current operation does not support ULA addresses. | diagnosis |
| 400 | OperationUnsupported.UnboundIpv6Feature | The region does not support creating IPv6 addresses that are not bound to any resources. | Creating an IPv6 address instance without an associated resource is not supported in this region. | diagnosis |
| 400 | OperationUnsupported.UnboundIpv6PrefixFeature | The region does not support creating IPv6 prefix that are not bound to any resources. | Creating an IPv6 prefix CIDR block without an associated resource is not supported in this region. | diagnosis |
| 400 | OperationUnsupported.UnsupportedNextHop | Unsupported nexthop type for route entry publish operation. | The next hop type of the route entry does not support publishing. | diagnosis |
| 400 | OperationUnsupported.VBRAttachedCen | Operation failed because the VBR is attached to CEN. | The operation failed because the VBR is already associated with a CEN instance. | diagnosis |
| 400 | OperationUnsupported.VBRAttachedECR | VBR already attached to ECR, please delete it from ECR. | The Virtual Border Router is already associated with an Express Connect Router (ECR). Remove the Virtual Border Router from the ECR and try again. | diagnosis |
| 400 | OperationUnsupported.VbrWithMultiPconn | The vbr %s has multiple pconn. | The VBR is associated with multiple physical connections. | diagnosis |
| 400 | OperationUnsupported.VirtualBorderRouterEnableIPv6 | The operation failed. The device or region does not support IPv6 functions. | The operation failed because the device or region does not support IPv6. | diagnosis |
| 400 | OperationUnsupported.VpcAttachedCen | Operation failed because the VPC is attached to CEN. | The operation failed because the VPC has been added to a Cloud Enterprise Network (CEN) instance. | diagnosis |
| 400 | OppositeRouterInterfaceIsDeleted | The opposite router interface is already deleted. | The router interface on the peer end has been deleted. | diagnosis |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. Ensure that you have subscribed to the service you are trying to use. | You are not authorized to use the requested flow log service. Make sure that you have subscribed to the service that you are trying to use. | diagnosis |
| 400 | OptInRequired.PublicIpAddressPool | You are not authorized to use the requested service of publicIpAddressPool. Ensure that you have subscribed to the service you are trying to use. | You are not authorized to use the requested IP address pool service. Make sure that you have subscribed to the service that you are trying to use. | diagnosis |
| 400 | OptInRequired.TrafficMirror | You need to subscribe to the traffic mirror service first. | The traffic mirroring service has not been activated. | diagnosis |
| ORDER.ACCOUNT_STATUS_ILLEGAL | The account status is invalid. | diagnosis | ||
| ORDER.ARREARAGE | The account balance is insufficient. | diagnosis | ||
| ORDER.BID_USER_ ORDER_FORBIDDEN | You cannot purchase preemptible instances with this account. | diagnosis | ||
| ORDER.INSTANCE_HAS_INACTIVE_CHANGE | Processing changes. | diagnosis | ||
| ORDER.INST_HAS_UNPAID_ORDER | The account has unpaid orders. | diagnosis | ||
| ORDER.INST_HAS_UNSETTLED_BILLS | The account has unpaid orders. | diagnosis | ||
| 400 | Order.NoRealNameAuthentication | Real-name verification has not been completed for the account. | You have not completed real-name verification. Go to the Account Center to complete real-name verification. | diagnosis |
| ORDER.NOT_ENOUGH_ACTIVITY_STOCK | The activity inventory is insufficient. | diagnosis | ||
| ORDER.NO_REAL_NAME_AUTHENTICATION | The account has not completed real-name verification. | diagnosis | ||
| ORDER.OPEND | The instance is enabled. | diagnosis | ||
| 400 | ORDER.OPENED | You have already open the service. Go to the console to start using it. | The outbound traffic service has already been activated. Use it in the console. | diagnosis |
| ORDER.ORDER_AMOUNT_ILLEGAL | The order amount is invalid. | diagnosis | ||
| ORDER.PERIOD_INVALID | The purchase cycle is invalid. | diagnosis | ||
| 400 | ORDER.QUANTITY_INVALID | User quota has exceeded the limit. | The number of EIPs that you currently hold has reached the upper limit. Go to Quota Center to increase the EIP quota. | diagnosis |
| ORDER.QUOTA_EXCEEDED | The number of instances that you purchased exceeds the upper limit. | diagnosis | ||
| ORDER.SYS_CONSTRAINT_INVALID | The order system has not passed constraint validation. | diagnosis | ||
| 400 | OrderError | Failed to create the order. | Failed to create the order. Try again later. | diagnosis |
| 400 | OrderError.EIP | Failed to place an order. | Failed to place the order. | diagnosis |
| 400 | OrderError.EIP | The account failed to create an order. | Failed to place the order. | diagnosis |
| 400 | OrderError.EIP | The Account failed to create order. | Failed to place the order. | diagnosis |
| OrderFailed | The system failed to create the order. | diagnosis | ||
| 400 | OrderFailed.ConcurrentOperate | Failed to create the order due to concurrent operations. | Failed to create the order due to a concurrent operation. | diagnosis |
| 400 | PARAMETER.FULLNAT.NATGATEWAYID.ERROR | natGatewayId is invalid | The parameter natGatewayId is invalid. | diagnosis |
| 400 | Parameter.Illegal | The parameter is illegal. | The parameter is invalid. | diagnosis |
| ParameterIllegal | ipCount | IpCount is set to an invalid value. | diagnosis | |
| 400 | ParameterIllegal.Name | ParameterIllegal.Name | The rule entry name is invalid. | diagnosis |
| 400 | ParameterInvalid | Invalid parameter. | The input parameter is invalid. | diagnosis |
| 400 | ParameterLengthIllegal.Name | ParameterLengthIllegal.Name | The length of the rule entry name is invalid. | diagnosis |
| ParameterMismatch.Role-Spec | The specified Spec and Role mismatch. | The router interface specification and role do not match. | diagnosis | |
| PARAMETER_MUST_NOT_NULL | The specified physical connection id or vbrId must not be null. | VbrId and PhysicalConnectionId are not specified. | diagnosis | |
| 400 | ParamExclusive.DisableIpv6AndIpv6CidrBlock | DisableIpv6 and Ipv6Cidr are mutually exclusive. | Operation conflict. You cannot modify Ipv6Cidr and disable the IPv6 feature at the same time. | diagnosis |
| 400 | ParamExclusive.IpInstanceIdAndBandwidthPackageId | IpInstanceId and BandwidthPackageId is mutually exclusive. | IpInstanceId and BandwidthPackageId are mutually exclusive. | diagnosis |
| 400 | ParamExclusive.Ipv6AddressIdAndIpv6InternetBandwidthId | Ipv6AddressId and Ipv6InternetBandwidthId is mutually exclusive. | The specified Ipv6AddressId and Ipv6InternetBandwidthId do not belong to the same instance. | diagnosis |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and RouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId and RouteTableIdOrDestCidrBlock are mutually exclusive. | diagnosis |
| 400 | ParamExclusive.SnatIpAndNetworkInterfaceId | SnatIp and NetworkInterfaceId is mutually exclusive when create a snat entry for nat. | When creating an SNAT rule for a NAT gateway instance, you cannot specify both the SnatIp parameter and the NetworkInterfaceId parameter. | diagnosis |
| 400 | ParamExclusive.VpnGatewayIdAndVpnConnectionId | VpnGatewayId and VpnConnectionId is mutually exclusive. | VpnGatewayId and VpnConnectionId are mutually exclusive. | diagnosis |
| ParamsInvalid | Invalid request parameters. | diagnosis | ||
| PAY.ACCOUNT_BOOK_NOT_EXIST | The specified account book does not exist. | diagnosis | ||
| PAY.AMOUNT_LIMIT_EXCEEDED | The amount exceeds the upper limit. | diagnosis | ||
| PAY.COUPON_NOT_EXIST | The coupon does not exist. | diagnosis | ||
| PAY.COUPON_NOT_MEET_CONSUMPTION_RULE | The specified coupon is invalid and cannot be used. | diagnosis | ||
| PAY.CURRENCY_INCONSISTENCY | The currency does not match. | diagnosis | ||
| PAY.CURRENCY_NOT_SUPPORTED | This account does not support the currency. | diagnosis | ||
| PAY.GET_PAY_URL_ERROR | An exception occurred while getting the top-up URL. | diagnosis | ||
| PAY.INSUFFICIENT_BALANCE | The account balance is insufficient. | diagnosis | ||
| 400 | PAY.INSUFFICIENT_BALANCE | The Account Balance is insufficient. | The account balance is insufficient. | diagnosis |
| 400 | PAY.INSUFFICIENT_BALANCE | Your account does not have enough balance. | The account balance is insufficient. | diagnosis |
| PAY.INVALID_AMOUNT | The payment amount is invalid. | diagnosis | ||
| PAY.INVALID_CREDIT_CARD | The specified credit card is invalid. | diagnosis | ||
| 400 | PAY.MAYI.WITHHOLDING.AGREEMENT.ILLEGAL | User withhoding argeement is illegal. | The fee is invalid. | diagnosis |
| PAY.NO_CREDIT_CARD | This account does not have a credit card added. | diagnosis | ||
| PAY.PAYMENT_PARAMETER_INVALID | The payment parameters are invalid. | diagnosis | ||
| PAY.PAY_ORDER_FAILED | The system failed to complete the payment. Try again later. | diagnosis | ||
| 400 | PAY.QueryParentRelationshipFailed | Lx failed to query the current user hosting relationship. | Failed to query the trusteeship relationship of the current user. | diagnosis |
| PAY.QUERY_QUOTA_BOOK_FAILED | The system failed to query the user quota. | diagnosis | ||
| PAY.REFUND_FAILED | An error occurred while refunding. | diagnosis | ||
| PAY.STORED_CARD_NOT_EXIST | The specified stored-value card does not exist. | diagnosis | ||
| PAY.TAX_CALC_FAILED | The system failed to calculate tax. | diagnosis | ||
| PAY.USER_DECLINED | The user refuses to pay. | diagnosis | ||
| PAY.WITHHOLDING_AGREEMENT_ILLEGAL | The tax withholding agreement is invalid. | diagnosis | ||
| 400 | PconnContailsMoreThanOneAcrossCountVbr | The specified physicalConnection contains more than one virtualBorderRouter which is across count. | Fault drills are not supported for an Express Connect circuit that contains more than one cross-account Virtual Border Router (VBR). | diagnosis |
| 400 | PconnContainsMoreThanOneVpconn | The specified physicalConnection contains more than one virtualPhysicalConnection. | Fault drills are not supported for an Express Connect circuit that contains more than one shared Express Connect circuit. | diagnosis |
| PHYSICAL_NOT_ALLOW_ASSOCIATE_VBR | The specified operation not allow. | The Express Connect circuit is associated with a VBR and the operation cannot be performed. | diagnosis | |
| 400 | PHYSICAL_NOT_ASSOCIATE_TO_VBR | The specified PhysicalConnection have not associate to the vbr. | No Virtual Border Router has been created for this Express Connect circuit. | diagnosis |
| PRICE.INQUIRY_FAILED | Pricing query failed. | diagnosis | ||
| PRICE.INVALID_INQUIRY_PARAMETER | The specified pricing query parameters are invalid. | diagnosis | ||
| PRICE.PRICING_PLAN_NOT_FOUND | The specified pricing scheme does not exist. | diagnosis | ||
| PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan is not matched. Submit a ticket. | diagnosis | ||
| 400 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan result is not found. | The product pricing plan was not found. | diagnosis |
| 400 | Price.SystemError | Price inquiry failed. | The price inquiry failed. Try again later. | diagnosis |
| PRICE.TAXING_ERROR | The system failed to calculate tax. | diagnosis | ||
| PRODUCT.INSTANCE_RELEASED | The instance is released. | diagnosis | ||
| PRODUCT.INSTANCE_TYPE_NOT_EXIST | The specified instance type does not exist. | diagnosis | ||
| PRODUCT.INSTANCE_TYPE_NOT_SUPPORTED | This instance type is unavailable for this account. | diagnosis | ||
| PRODUCT.INSUFFICIENT_STOCK | The operation failed because resources are insufficient. | diagnosis | ||
| PRODUCT.NOT_AVAILABLE_IZ | The specified zone is not supported. | diagnosis | ||
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | The specified project or Logstore does not exist. | diagnosis |
| PURCHASE.NO_VAILD_PURCHASE | The purchase is invalid. | diagnosis | ||
| PURCHASE.PURCHASE_QUERY_FAILED | The specified purchase record cannot be found. | diagnosis | ||
| 400 | PURCHASE.QUANTITY.LIMIT | Your purchase quantity exceeds the maximum limit. | The purchase quantity exceeds the maximum limit. | diagnosis |
| QUANTITY_INVALID | The number of instances exceeds the upper limit. | diagnosis | ||
| 400 | QueryVpnConnectionLog.NotFound | the connection log of the vpn connection is not found. | No connection logs were found for the specified VPN connection. | diagnosis |
| 400 | QuotaExceed.MultiBindedEip | The number of multi binded eip is over limit. | The number of EIPs that can be associated in multi-EIP to ENI mode exceeds the limit. | diagnosis |
| 400 | QuotaExceed.NetworkAclEntry | Network acl entry is over limit. | The number of network ACL rules entries exceeds the limit. | diagnosis |
| QuotaExceed.RouterInterface | Living RouterInterface quota exceeded. | The number of active router interfaces has reached the upper limit. | diagnosis | |
| QuotaExceeded | Route entry quota exceeded in this route table. | The number of route entries in the route table has reached the upper limit. | diagnosis | |
| 400 | QuotaExceeded | Forward entry quota exceeded in this route table. | The number of custom route entries in a single routing table cannot exceed 200. You can request a quota increase on the Quota Center page. | diagnosis |
| 400 | QuotaExceeded | Route entry quota exceeded in associated route table. | The maximum number of route entries in the prefix list exceeds the maximum number of route entries allowed by the associated route table. | diagnosis |
| 400 | QuotaExceeded | RiPerUser quota exceeded | The number of VPC peering connection router interfaces created by the current user has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.AttachVpcNumber | The maximum number of VPCs that can be attached to a DHCP options set is exceeded. | The number of VPCs that can be associated with a single DHCP options set instance has exceeded the quota. | diagnosis |
| QuotaExceeded.BandwidthPackageCountOnNatGateway | BandwidthPackage count limit on one NatGateway exceeded. | The number of NAT service plans has reached the upper limit. You can associate up to four NAT service plans with a NAT gateway. | diagnosis | |
| 400 | QuotaExceeded.BandwidthPackageIps | The specified ipCount exceeded quota. | The number of IP addresses exceeds the upper limit. You can request a quota increase on the Quota Center page. | diagnosis |
| 400 | QuotaExceeded.Bgp | bgp peer count per vbr quota exceed. | The number of BGP peers for the Virtual Border Router has reached the quota. | diagnosis |
| QuotaExceeded.Bgp | bgp group count per vbr quota exceed. | The number of BGP groups in the VBR has reached the upper limit. | diagnosis | |
| QuotaExceeded.BgpNetwork | bgp network count per vbr quota exceed. | The number of BGP networks in the VBR has reached the upper limit. | diagnosis | |
| 400 | QuotaExceeded.CidrReservationCount | The quota of VSwitchCidrReservation is exceeded. | The VSwitchCidrReservation quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.CidrReservationCount | QuotaExceeded.CidrReservationCount | The number of CidrReservations you created has exceeded the limit. | diagnosis |
| 400 | QuotaExceeded.CrossUserVBRPerUser | Cross virtual boarder router per user quota exceed. | The quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.DomainNameServers | The maximum number of domain name servers cannot exceed 4. | The number of configured DomainNameServers exceeds 4. | diagnosis |
| 400 | QuotaExceeded.Eip | Elastic IP address quota exceeded. | The number of elastic IP addresses (EIPs) exceeds the quota limit. If you need a higher quota, you can request an EIP quota increase or consider using a NAT gateway. | diagnosis |
| 400 | QuotaExceeded.EipNumForModifyEipBondType | The quota of %s is exceeded, binded: %s, quota: %s. | The number of EIPs allowed when modifying the EIP bindng type has been exceeded. | diagnosis |
| 400 | QuotaExceeded.FilterRelatedSession | The quota of the number of traffic mirror sessions related to one filter is exceeded. | The quota for the number of traffic mirror sessions associated with the traffic mirror filter has been exceeded. | diagnosis |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | The maximum number of flow log instances has been reached. | diagnosis |
| 400 | QuotaExceeded.ForwardEntrySessionManytoOne | The dnat session quota is exceed. | The many-to-one quota for DNAT sessions has been exceeded. | diagnosis |
| QuotaExceeded.freePconnPerAP | free physical connections count excceeded. | The quota on Express Connect circuits is exhausted. | diagnosis | |
| 400 | QuotaExceeded.FreePhysicalConnectionPerAccessPoint | Free physical connections count excceeded. | The quota for Express Connect circuits that the user can create has been exceeded. Contact the administrator to increase the quota and try again. | diagnosis |
| QuotaExceeded.freevbr | Free virtual boarder router quota exceed. | The number of VBRs exceeds the upper limit. | diagnosis | |
| 400 | QuotaExceeded.FullNatEntry | The quota of %s is exceeded, usage %s/%s. | The number of FullNatEntry entries in use has exceeded the quota. | diagnosis |
| 400 | QuotaExceeded.GatewayRouteTable | The quota of Gateway Route Table is exceeded. | The quota for creating gateway route tables per VPC has been reached. | diagnosis |
| QuotaExceeded.GlobalAccelerationInstance | The number of GA instances reaches the upper limit. | diagnosis | ||
| 400 | QuotaExceeded.GUAIpv6CidrBlock | GUAIpv6CidrBlock quota exceeded. | The GUAIpv6CidrBlock has reached the quota limit. | diagnosis |
| QuotaExceeded.HaVip | Living HaVip quota exceeded. | The number of active HAVIPs exceeds the upper limit. | diagnosis | |
| 400 | QuotaExceeded.IPv6CidrBlock | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | The number of IPv6 CIDR blocks in the VPC has exceeded the limit. | diagnosis |
| 400 | QuotaExceeded.Ipv6EgressRules | %s quota exceeded. | The Ipv6EgressRules quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.IPv6PrefixMask | The quota of specifed ipv6 prefix mask is exceeded. | The specified IPv6 prefix mask exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.NetworkInterfaceRelatedSession | The quota of the number of traffic mirror sessions related to one network interface is exceeded. | The number of traffic mirror sessions associated with a single network interface controller (NIC) exceeds the quota. | diagnosis |
| QuotaExceeded.Nqa | nqa count per vbr quota exceed. | The number of Network Quality Analyzers (NQAs) has reached the upper limit that is supported by the VBR. | diagnosis | |
| 400 | QuotaExceeded.NumberOfEip | Binded eip Quota exceed on this NatGw. | The number of EIPs that can be attached to this NAT gateway exceeds the quota limit. | diagnosis |
| 400 | QuotaExceeded.PBR | The policy-based routes has reached the upper limit. | The number of policy-based routes has reached the upper limit. | diagnosis |
| QuotaExceeded.pConnPerAP | Physical connection count per ap quota exceed. | The number of Express Connect circuits that are connected to the specified access point has reached the upper limit. | diagnosis | |
| 400 | QuotaExceeded.PhysicalConnectionPerAccessPoint | Physical connection count per ap quota exceed. | The number of Express Connect circuits that can be purchased for a single access point exceeds the quota. Contact the administrator to increase the quota. | diagnosis |
| 400 | QuotaExceeded.PolicyBasedRoute | The maximum number of policy-based routes is exceeded. Existing routes: %s. Routes to be created: %s. Maximum routes: %s. | The number of policy-based routes has reached the upper limit. The current number is %s, this operation will create %s, and the upper limit is %s. | diagnosis |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of PoolIpQuantity is exceeded. | The number of IP addresses in the IPAM pool exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.PrefixesCount | The quota of prefixes count is exceeded. | The number of prefixes exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixListMaxEntry count is exceeded. | The specified maximum entryCount exceeds the threshold. | diagnosis |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixList entry maxEntry count is exceeded. | The maximum number of route entries allowed for the prefix list exceeds the limit. | diagnosis |
| 400 | QuotaExceeded.PrefixListCount | The quota of prefixList count is exceeded. | The number of prefix lists that the user can create exceeds the threshold. | diagnosis |
| 400 | QuotaExceeded.PublicIpAddressPool | The quota of PublicIpAddressPool is exceeded. | The number of PublicIpAddressPools has reached the quota. Increase the quota before proceeding. | diagnosis |
| 400 | QuotaExceeded.Qos | The quota of QoS is exceeded. | The number of QoS policies for the current user exceeds the limit. Contact your account manager to resolve this issue. | diagnosis |
| 400 | QuotaExceeded.QosHighPriorityQueueCount | The quota of QosHighPriorityQueueCount is exceeded. | The number of high-priority queues in the QoS policy exceeds the specification. Contact your account manager to increase the quota. | diagnosis |
| 400 | QuotaExceeded.QosMediumPriorityQueueBandwidthPercent | The quota of QosMediumPriorityQueueBandwidthPercent is exceeded. | The total bandwidth percentage of normal-priority queues in the QoS policy exceeds the specification. | diagnosis |
| 400 | QuotaExceeded.QosMediumPriorityQueueCount | The quota of QosMediumPriorityQueueCount is exceeded. | The number of normal-priority queues in the QoS policy exceeds the specification. Contact your account manager to increase the quota. | diagnosis |
| 400 | QuotaExceeded.QosRuleCount | The quota of QosRuleCount is exceeded. | The number of QoS rules in the QoS queue exceeds the upper limit. Contact your account manager to increase the quota. | diagnosis |
| 400 | QuotaExceeded.RegionDhcpOptionsSet | The quota of dhcpOptionsSet in the region is exceeded. | The number of DHCP options set instances that a single user can create exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.ReservedCidrMask | QuotaExceeded.ReservedCidrMask | The specified ReservedCidrMask is invalid. Enter a valid value based on the request parameter requirements. | diagnosis |
| 400 | QuotaExceeded.RouteTable | VPC RouteTable quota exceeded. | The number of VPC route tables exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.SameAccountVBRPerPconn | Same account virtual boarder router per physicalConnection quota exceed. | The number of Virtual Border Routers exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.SessionNum | The quota of the number of traffic mirror sessions is exceeded. | The number of traffic mirror sessions exceeds the limit. | diagnosis |
| 400 | QuotaExceeded.SlbRelatedSession | The quota of the number of traffic mirror sessions related to one SLB is exceeded. | The number of traffic mirror sessions associated with a single SLB instance exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.SourceNumPerSession | The quota of the number of traffic mirror sources per session is exceeded. | The number of sources that can be associated with each traffic mirror session exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.SourceNumPerTarget | The maximum number of traffic mirror sources for a target is exceeded. | The number of traffic mirror sources associated with the traffic mirror destination exceeds the limit. | diagnosis |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | The quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.TrafficMirrorFilter | The maximum number of traffic image filters is exceeded. | The number of traffic mirror filters exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.TrafficMirrorRulesPerFilter | The quota of the number of traffic mirror rules per filter is exceeded. | The number of filter rules associated with a single traffic mirror filter exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.VBRBandwidth | The VBR bandwidth must not exceed the physical connection bandwidth. | The Virtual Border Router bandwidth exceeds the limit (Express Connect circuit bandwidth). | diagnosis |
| 400 | QuotaExceeded.VbrPerAccessDevice | Virtual boarder router per access device quota exceed. | The device quota has been exceeded. | diagnosis |
| QuotaExceeded.vbrPerpConn | Virtual boarder router per PhysicalConnection quota exceed. | The number of VBRs of each Express Connect circuit has reached the upper limit. Reduce the number of VBRs and try again. | diagnosis | |
| 400 | QuotaExceeded.VbrPerPconnPortSpec | Quota exceed for current port spec | The quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | The quota for virtual border router bandwidth is exceeded. | The VirtualBorderRouterBandwidth quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | Quota Exceeded of VirtualBorderRouterBandwidth | The VBR bandwidth quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.Vpc | VPC quota exceeded. | The number of VPCs under the account has reached the quota upper limit. | diagnosis |
| 400 | QuotaExceeded.VPCONN | The quota of VPCONN_COUNT_PER_PCONN is exceeded | The number of shared ports created on a single physical port exceeds the quota. | diagnosis |
| 400 | QuotaExceeded.VpnRouteEntry | The number of route entries to the VPN gateway in the VPC routing table has reached the quota limit. | The number of routing entries pointing to the VPN gateway in the VPC route table has reached the quota limit. | diagnosis |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | Failed to create the route entry because the number of VPN route entries exceeds the limit. | diagnosis |
| 400 | QuotaExceeded.VSwitch | Virtual switch quota exceeded. | The number of vSwitches has reached the quota upper limit. Reduce the number of vSwitches and try again. | diagnosis |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The quota of VSwitchCidrReservationMask is exceeded. | The VSwitchCidrReservationMask exceeds the quota. Modify the parameter based on the metric description in the API documentation and retry. | diagnosis |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The operation is failed because of %s. The mask of the reserved subnet cidr exceeds the current default mask of IP Prefix, %s/%s. | The operation failed due to the %s quota limit. The mask of the reserved CIDR block exceeds the default mask of the current IP prefix, %s/%s. | diagnosis |
| RealNameAuthenticationError | Your account has not passed the real-name authentication yet. | Your account has not completed real-name verification. Complete real-name verification and try again. | diagnosis | |
| 400 | ReferredByRouteEntry.RouterInterface | Router interface referred by route entry. | The router interface is referenced by a route entry. | diagnosis |
| ReserveIpFail | Reserve eip failed. | The system failed to reserve the specified EIP. | diagnosis | |
| 400 | Resource.PbrRouteQuotaFull | The quota of Policy-based route is full. | The policy route quota has been exceeded. | diagnosis |
| Resource.QuotaFull | The quota of resource is full | The resource quota is exhausted. | diagnosis | |
| 400 | Resource.QuotaFull | The resources you are operating have reached the upper limit of the quota. Please increase the quota or use other solutions to avoid it according to the VPN operation document. | The resource you are operating on has reached the quota limit. Refer to the VPN documentation to increase the quota or use an alternative solution. | diagnosis |
| 400 | ResourceAlreadyAssociated.GatewayRouteTable | The specified resource %s is already associated. | The specified gateway route table is already associated with a gateway instance of the same type. | diagnosis |
| 400 | ResourceAlreadyAssociated.Ipv4Gateway | The specified resource %s is already associated. | The specified IPv4 gateway is already associated. | diagnosis |
| 400 | ResourceAlreadyAssociated.PconnQos | The specified resource of PconnQos is already associated. | The Express Connect circuit is already associated with another QoS policy. | diagnosis |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | The operation failed because the prefix list route already exists. | diagnosis |
| 400 | ResourceAlreadyAssociated.RouteTable | The specified route table is already associated. | The specified route table is already associated. | diagnosis |
| 400 | ResourceAlreadyAssociated.TrafficMirrorSource | The specified traffic mirror source and session are already associated. | The specified traffic mirror source is already attached to the session. | diagnosis |
| 400 | ResourceAlreadyAssociated.Vbr | The specified Vbr is already added. | The specified VBR is already associated. | diagnosis |
| 400 | ResourceAlreadyExist.DefaultVSwitch | The specified resource default vswitch already exists. | The default vSwitch already exists. | diagnosis |
| 400 | ResourceAlreadyExist.FullNatEntry | The specified resource of %s is already exist. | The FULLNAT rule already exists. | diagnosis |
| 400 | ResourceAlreadyExist.NatIp | The specified resource of NatIp has already exist. | The configured NatIp already exists. | diagnosis |
| 400 | ResourceAlreadyExist.NatIpCidr | The configured NatIpCidr already exists, or the IP address is overlap. | The configured NatIpCidr already exists, or the IP address overlaps with an existing one. | diagnosis |
| 400 | ResourceAlreadyExist.NatQosEntry | The specified natGateway qosEntry already exists | The rate limiting rule already exists. | diagnosis |
| 400 | ResourceInConfiguring | The resource is being configured. | The resource is being modified. | diagnosis |
| 400 | ResourceInUse.Vbr | The specified resource of [%s] is in use. | The specified VBR is still in use. | diagnosis |
| ResourceNotAssociated | The HaVip and ECS instance are not associated. | The HAVIP is not bound to the ECS instance. | diagnosis | |
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | The operation failed because this VPC is not associated with the CEN instance. | diagnosis |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | The current resource is not associated with an Express Connect Router (ECR). Verify the association and try again. | diagnosis |
| 400 | ResourceNotAssociated.TargetInstance | The target instance is not associated with VPC. | The target instance for route advertisement is not associated with the VPC. | diagnosis |
| 400 | ResourceNotAssociated.TrafficMirrorSource | The specified traffic mirror source and session are not associated. | The specified traffic mirror source is not attached to the session. | diagnosis |
| 400 | ResourceNotAssociated.VBR | The specified resource of VBR is not associated. | The specified Virtual Border Router (VBR) is not associated with BondRI. Verify the association and try again. | diagnosis |
| ResourceNotAvailable | Resource you requested is not available in this region or zone. | You cannot create a vSwitch in the current region or zone. | diagnosis | |
| 400 | ResourceNotAvailable.NoZonesAvailable | The availability zones of the input region are not available. | The zone in the specified region is unavailable. | diagnosis |
| ResourceNotAvailable.Vpc | Resource you requested is not available in this region or zone. | The resource you requested is not available in this region or zone. | diagnosis | |
| 400 | ResourceNotEnough.Bandwidth | The specified resource of Bandwidth is not enough. | Insufficient bandwidth resources. | diagnosis |
| 400 | ResourceNotEnough.CidrBlock | Out of Resources: No matching CIDR block found. | Insufficient resources: no matching CIDR block was found. | diagnosis |
| 400 | ResourceNotEnough.CidrBlock | The specified resource is not enough. | The specified resource is insufficient. | diagnosis |
| 400 | ResourceNotEnough.CommonBandWidthPackage | The specified resource commonBandWidthPackage is not enough. | Insufficient Internet Shared Bandwidth resources. | diagnosis |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource of Ipv6Cidr is not enough. | Insufficient IPv6 address resources. | diagnosis |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource ipv6 cidr is not enough. | Insufficient resources for the specified IPv6 CIDR block. | diagnosis |
| 400 | ResourceNotEnough.NatIp | The specified resource of NatIp is not enough. | Insufficient IP addresses in the specified CIDR block. | diagnosis |
| 400 | ResourceNotEnough.SwitchAvailableIps | The available private Ip number is not enough in your subnet. | Insufficient available private IP addresses in the subnet. | diagnosis |
| 400 | ResourceNotFound | The specified resource %s is not found. | The specified resource does not exist. | diagnosis |
| 404 | ResourceNotFound.%s | The specified resource of %s is not found. | The specified resource does not exist. | diagnosis |
| 400 | ResourceNotFound.AccessPointId | The specified resource of access point id is not found. | The current access point information does not exist. Verify the information and try again. | diagnosis |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of [%s] is not found. | The BondRi Connection does not exist. | diagnosis |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of BondRI not found. | The specified BondRI instance does not exist. | diagnosis |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | The operation failed because the specified CEN resource does not exist. | diagnosis |
| 400 | ResourceNotFound.CidrBlock | The specified CIDR block is not found. | The CIDR block that you added does not exist. | diagnosis |
| 400 | ResourceNotFound.CidrReservation | The specified resource of %s is not found | The specified CidrReservation does not exist. Check whether the CidrReservation is available. | diagnosis |
| 404 | ResourceNotFound.CidrReservation | The specified resource of VSwitchCidrReservation is not found. | The specified VSwitchCidrReservation instance does not exist. | diagnosis |
| 400 | ResourceNotFound.CidrReservation | ResourceNotFound.CidrReservation | The specified VSwitchCidrReservation does not exist. Check whether the VSwitchCidrReservation is available. | diagnosis |
| 400 | ResourceNotFound.CidrReservation | reserve segment not exist. | The CIDR block does not exist. | diagnosis |
| 400 | ResourceNotFound.EcsInstance | The specified resource of ECS instance is not found. | The specified ECS instance does not exist. | diagnosis |
| 400 | ResourceNotFound.EipSegment | The specified resource of Eip Segment is not found. | The specified contiguous EIP group instance does not exist. | diagnosis |
| 404 | ResourceNotFound.ForwardEntry | The specified resource of %s is not found. | The specified %s resource cannot be found. | diagnosis |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of %s is not found. | The specified FullNatEntry cannot be found. | diagnosis |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of full nat entry is not found. | The specified full NAT entry cannot be found. | diagnosis |
| 404 | ResourceNotFound.FullNatTable | The NAT gateway has no full nat table. | The NAT gateway does not have a full NAT table. | diagnosis |
| 400 | ResourceNotFound.FullNatTableId | The specified resource of %s is not found. | The FullNat table does not exist. | diagnosis |
| 400 | ResourceNotFound.GatewayEndpoint | The specified resource gateway endpoint is not found. | The specified GatewayEndpoint does not exist. | diagnosis |
| 404 | ResourceNotFound.GatewayLoadBalancerEndpoint | GatewayLoadBalancerEndpoint instance not found. | The GatewayLoadBalancerEndpoint instance cannot be found. | diagnosis |
| 400 | ResourceNotFound.GatewayRouteTable | The specified resource GatewayRouteTable is not found. | The specified gateway route table cannot be found. | diagnosis |
| 400 | ResourceNotFound.Instance | The specified resource nextHop is not found. | The next hop instance does not exist. | diagnosis |
| 400 | ResourceNotFound.Instance | The specified binding resource is not found. | The bindable resource does not exist. | diagnosis |
| 400 | ResourceNotFound.Ip | The specified ip is not found. | The specified IP address cannot be found. | diagnosis |
| 404 | ResourceNotFound.IpamPool | The dependent IPAM pool is not found. | The dependent resource IPAM Pool does not exist. | diagnosis |
| 400 | ResourceNotFound.Ipv4Gateway | The specified resource ipv4Gateway is not found. | The specified IPv4 gateway cannot be found and cannot be deleted. | diagnosis |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | The specified IPv4 gateway instance does not exist. | diagnosis |
| 404 | ResourceNotFound.Ipv6Address | The specified resource of %s is not found. | The specified IPv6 address does not exist. Check whether your input is correct. | diagnosis |
| 404 | ResourceNotFound.Ipv6EgressOnlyRule | The specified resource of IPv6 Gateway Rule is not found. | The specified IPv6 egress-only rule instance does not exist. | diagnosis |
| 400 | ResourceNotFound.Ipv6Gateway | The specified resource of IPv6 Gateway is not found. | The specified IPv6 gateway instance does not exist. | diagnosis |
| 404 | ResourceNotFound.Ipv6InstanceId | The specified resource of %s is not found. | The specified IPv6 instance ID does not exist. Check whether your input is correct. | diagnosis |
| 404 | ResourceNotFound.NatGateway | The NatGateway instance not exist. | The NAT gateway does not exist. | diagnosis |
| 404 | ResourceNotFound.NatGateway | The specific NAT gateway is not found. | The specified NAT gateway does not exist. | diagnosis |
| 400 | ResourceNotFound.NatIp | The specified resource of %s is not found. | The NatIp resource cannot be found. | diagnosis |
| 400 | ResourceNotFound.NatIpCidr | The specified resource of %s is not found. | The specified %s resource cannot be found. | diagnosis |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | The specified network interface does not exist. | diagnosis |
| 400 | ResourceNotFound.NetworkInterface | The specified resource nextHop is not found. | The next hop elastic network interface (ENI) does not exist. | diagnosis |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of %s is not found. | The specified NetworkInterface %s does not exist. | diagnosis |
| 400 | ResourceNotFound.NetworkInterfaceId | The specified resource is not found. | The resource cannot be found. | diagnosis |
| 400 | ResourceNotFound.NextHop | The specified resource nextHop is not found. | The next hop instance does not exist. | diagnosis |
| 400 | ResourceNotFound.PhysicalConnection | The specified resource of %s is not found. | The Express Connect circuit does not exist. | diagnosis |
| 400 | ResourceNotFound.PhysicalConnectionId | PhysicalConnection is not found. | The PhysicalConnectionId cannot be found. | diagnosis |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified PhysicalConnectionId [%s] is not found. | The PhysicalConnectionId cannot be found. | diagnosis |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified resource of [%s] is not found. | The PhysicalConnection does not exist. | diagnosis |
| 400 | ResourceNotFound.PrefixList | The specified resource of prefixList is not found. | The specified prefix list does not exist. | diagnosis |
| 400 | ResourceNotFound.PrefixListRelation | The specified resource of prefixList relation is not found. | The PrefixList association does not exist. | diagnosis |
| 400 | ResourceNotFound.PublicIpAddressPool | The specified resource of PublicIpAddressPool [%s] is not found. | The specified public IP address pool instance does not exist. | diagnosis |
| 400 | ResourceNotFound.QosTableIdOrNatGatewayId | natGatewayId and qosTableId can not both be null | The natGatewayId and qosTableId cannot both be empty. | diagnosis |
| 400 | ResourceNotFound.RouteEntry | The specified resource routeEntry is not found. | The specified route entry does not exist. | diagnosis |
| 400 | ResourceNotFound.RouteTable | The specified resource gatewayRouteTable is not found. | The gateway route table does not exist. | diagnosis |
| 400 | ResourceNotFound.Slb | The specified resource of SLB is not found. | The specified SLB instance does not exist. | diagnosis |
| 404 | ResourceNotFound.SnatEntry | Specified SNAT entry does not exist. | The specified SNAT entry does not exist. | diagnosis |
| 400 | ResourceNotFound.TargetInstance | The specified target instance for traffic mirroring is not found. | The specified traffic mirror destination does not exist. | diagnosis |
| 400 | ResourceNotFound.TrafficMirrorFilter | The specified resource of traffic mirror filter is not found. | The specified traffic mirror filter does not exist. | diagnosis |
| 400 | ResourceNotFound.TrafficMirrorRule | The specified resource of traffic mirror rule is not found. | The specified traffic mirroring filter rule does not exist. | diagnosis |
| 400 | ResourceNotFound.TrafficMirrorSession | The specified resource of traffic mirror session is not found. | The specified traffic mirror session does not exist. | diagnosis |
| 400 | ResourceNotFound.VirtualBorderRouter | The specified resource of %s is not found. | The Virtual Border Router does not exist. | diagnosis |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | The specified VpcPeer cannot be found. | diagnosis |
| 400 | ResourceNotFound.VSwitch | The specified resource of VSwitch is not found. | The specified VSwitch instance does not exist. | diagnosis |
| 400 | ResourceNotFound.VSwitch | ResourceNotFound.VSwitch | The specified VSwitch does not exist. Check whether the VSwitch is available. | diagnosis |
| 404 | ResourceNotFound.VSwitch | The specified resource of %s is not found. | The specified vSwitch does not exist. Check whether your input is correct. | diagnosis |
| 400 | ResourceNotFound.VSwitch | The vSwitch where the specified networkinterface is located does not exist. | The vSwitch associated with the network interface controller (NIC) does not exist. | diagnosis |
| 404 | ResourceNotFound.VSwitchCidrReservation | The dependent vswitch cidr reservation is not found. | The dependent resource vSwitchCidrReservation does not exist. | diagnosis |
| 400 | ResourceNotInResourceGroup | The specified resource is not in the specified ResourceGroup. | The specified resource is not in the specified resource group. | diagnosis |
| 400 | ResourceQueryError | The specified resource is queried error. | An error occurred while querying the specified resource. | diagnosis |
| 400 | ResourceQuotaExceeded.NatQosEntry | The specified natGateway qosEntry quota exceed. | The number of rate limiting entries for this NAT gateway has reached the quota. | diagnosis |
| 400 | ResourceStatus.Error | The binding instance is in middle status. | The associated instance is in an intermediate state. | diagnosis |
| 400 | ResourceType.Unknown | Unknown ResourceType. | The resource type does not exist. | diagnosis |
| RISK.RISK_CONTROL_REJECTION | The account is disabled by the risk control system. | diagnosis | ||
| RI_CREATE_ONE_LIMIT_BY_SYNC | Create ri only one limit by sync. | You can create only one router interface at a time. | diagnosis | |
| 400 | RouteConflict | Route conflict exists in routing table. | A route conflict exists in the route table. | diagnosis |
| 400 | RouteConflict.AlreadyExist | Route conflict exists in routing table. | A route conflict exists in the route table. | diagnosis |
| RouterEntryConflict.Duplicated | A route entry already exists | The route already exists. | diagnosis | |
| 400 | RouterInterfaceReferredByRouteEntry | Router interface referred by route entry. | The route entry cannot be deleted because a route pointing to the router interface exists. | diagnosis |
| ROUTER_INTERFACE_REFERED_BY_ROUTEENTRY | The specified VlanInterface has been used by routeEntry. | The VLAN interface is being used by a route entry. | diagnosis | |
| 400 | RuleExist | The rule already exists. | The rule already exists. | diagnosis |
| 400 | SecurityGroup.NotExist | The specified security group is not exist. | The security group does not exist in this VPC. | diagnosis |
| 400 | SecurityGroupType.NotSupported | The specified security group type is not supported. | The security group is managed and cannot be used. | diagnosis |
| 400 | ServiceUnavailable | The request has failed due to a temporary failure of the server. | The request failed due to a temporary server failure. | diagnosis |
| 400 | SignatureNonceUsed | Specified signature nonce was used already. | The specified signature nonce has already been used. | diagnosis |
| 400 | SizeLimitExceeded.ResourceId | The maximum number of resource IDs is exceeded. | The number of resource group IDs has exceeded the limit. | diagnosis |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | The number of tags has exceeded the limit. | diagnosis |
| SNAT_IP_POOL_COUNT_TOO_MANY | The Snat pool ip too many. | The number of IP addresses has reached the upper limit supported by the SNAT IP address pool. | diagnosis | |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | The specified Simple Log Service (SLS) source project or Logstore does not exist. | diagnosis |
| 400 | SslVpnIDaaS2.NotSupport | Current version of the VPN does not support IDaaS2.0. | The current VPN instance version does not support IDaaS 2.0. | diagnosis |
| 400 | SslVpnServer.AddRouteError | Add route error whose destination is client IP pool, please check vpc route entry and relevant quota. | Failed to add the route to the client CIDR block. Check the VPC route entries and related quotas. | diagnosis |
| 400 | SslVpnServer.AlreadyExist | The SSL VPN server of specified vpn gateway already exists. | An SSL VPN server already exists for the specified VPN gateway. | diagnosis |
| 400 | SslVpnServerPort.Illegal | The server port is not in the range of [1-65535]. | The port number of the SSL VPN server must be in the range of [1-65535]. | diagnosis |
| 500 | SystemBusy | The system is busy. Please try again later. | The system is busy. Try again later. | diagnosis |
| 400 | SystemQuotaConstraint.Filter.Key | The number of keys in the filter parameter cannot exceed 5. | The number of keys in the filter parameters cannot exceed 5. | diagnosis |
| 400 | SystemQuotaConstraint.Filter.Value | The number of values in a key in the filter parameter cannot exceed 5. | The number of values for a single key in the filter parameters cannot exceed 5. | diagnosis |
| TaskConflict | The eip operate too frequent | EIP operations are too frequent. | diagnosis | |
| 400 | TaskConflict | The operation is too frequent. Please wait a moment and try again. | The operation is too frequent. Try again later. | diagnosis |
| 400 | TaskConflict | The operation is too frequent. Please try again later. | The operation is too frequent. Try again later. | diagnosis |
| 400 | TaskConflict | The eip operate too frequent, TaskConflict. | The operation is too frequent. A task conflict occurred. | diagnosis |
| 400 | TaskConflict | The operation is too frequent, TaskConflict. | The operation is too frequent. Try again later. | diagnosis |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | The operation is too frequent. Wait a moment and try again. | diagnosis |
| TaskConflict.AssociateGlobalAccelerationInstance | Operate too frequent. | The number of requests that you send exceeds the upper limit. | diagnosis | |
| Throttling | Request was denied due to request throttling. | The traffic volume exceeds the quota. To increase the quota, submit a ticket. | diagnosis | |
| 400 | Throttling.User | Request was denied due to user flow control. | The request was rejected due to client-side throttling. | diagnosis |
| 400 | Unauthorized | This api does not support sub user or role. | This API operation does not support RAM users or roles. | diagnosis |
| 400 | Unavailable.Ipv6Cidr | The specified resource ipv6 cidr is not available. | The specified IPv6 CIDR block is unavailable. | diagnosis |
| UnknownError | The request processing has failed due to some unknown error. | An unknown error occurred. Try again later. If the error persists, submit a ticket. | diagnosis | |
| 400 | UnsupportedFeature.AccessModeValue | The feature of AccessMode.ModeValue(%s) is not supported. | This operation is not supported for the AccessMode.ModeValue property of VPC NAT. | diagnosis |
| 400 | UnsupportedFeature.AllocateEipAddressWithZone | The feature of AllocateEipAddressWithZone is not supported. | Creating instances in the specified zone is not supported in the current region. | diagnosis |
| 400 | UnsupportedFeature.CloudBoxHaVip | The HAVIP feature is not supported in cloud box. | CloudBox does not support creating high-availability virtual IP addresses. | diagnosis |
| 400 | UnsupportedFeature.CloudBoxIpv6 | The IPv6 feature is not supported by cloud box. | CloudBox does not support creating IPv6 addresses. | diagnosis |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | Creating ECMP routes using prefix lists is not supported. | diagnosis |
| 400 | UnsupportedFeature.DhcpOptionsSet | The feature of dhcp options set is unsupported. | DHCP options set-related features do not take effect in the current region. | diagnosis |
| 400 | UnsupportedFeature.EipBindIpAddress | The feature of EipBindIpAddress is not supported. | Binding an EIP to an IP address is not supported. | diagnosis |
| 400 | UnsupportedFeature.EipBindPrefixIp | The feature of EipBindPrefixIp is not supported. | Binding an EIP to a PrefixIp is not supported in the current region. | diagnosis |
| 400 | UnsupportedFeature.EnableSessionLog | The feature of EnableSessionLog is not supported. | The current instance does not support enabling session logs of NAT gateways. | diagnosis |
| 400 | UnsupportedFeature.FwNatInMutilBindedEipBindType | The FW NAT in MUTIL_BINDED eip bind type is can not be created. | Creating an EIP with the binding type MUTIL_BINDED for the protection type is not supported. | diagnosis |
| 400 | UnsupportedFeature.Geneve | The feature of Geneve is not supported. | Creating a NAT gateway in Geneve mode is not supported. | diagnosis |
| 400 | UnsupportedFeature.IcmpReplyEnabled | The feature of IcmpReplyEnabled is not supported. | Modifying the ICMP echo reply feature is not supported. | diagnosis |
| 400 | UnsupportedFeature.IndirectConvertForFwNat | The security protection enabled NAT gateway is not support change EIP bond type. | An Internet NAT gateway with the protection feature enabled does not support modifying the EIP binding type. | diagnosis |
| 400 | UnsupportedFeature.IndirectConvertForVpcNat | The VPC NAT gateway is not support to change EIP bond type. | VPC NAT gateways do not support modifying the EIP binding type. | diagnosis |
| 400 | UnsupportedFeature.InternetChargeTypeOnFreeIpv6Address | The feature of %s is not supported. | The current IPv6 instance is in a detached state and does not support the specified billing type. Refer to the metric description in the API documentation, modify the parameters, and retry. | diagnosis |
| 400 | UnsupportedFeature.InternetChargeTypeOnStaticIsp | The feature of %s is not supported. | The current IPv6 instance is a single-ISP instance and does not support the specified billing type. Refer to the metric description in the API documentation, modify the parameters, and retry. | diagnosis |
| 400 | UnsupportedFeature.IPAM | VPCs cannot be created by using IPAM. | The attribute to create a VPC using IPAM is not supported. | diagnosis |
| 400 | UnsupportedFeature.Ipam | IPAM is not supported in this region. | The IPAM feature is not supported in this region. | diagnosis |
| 400 | UnsupportedFeature.Ipv4Gateway | The feature of ipv4Gateway is not supported for [%s]. | Failed to create the IPv4 gateway because the IPv4 gateway feature is not supported. | diagnosis |
| 400 | UnsupportedFeature.Ipv6GatewayRouteTable | The feature of %s is not supported. | The specified gateway route table does not support bindng to this gateway instance. | diagnosis |
| 400 | UnsupportedFeature.Ipv6Isp | The Ipv6Isp feature is not supported. | The specified Ipv6Isp feature is not supported. | diagnosis |
| 400 | UnsupportedFeature.IpVersion | The ipversion type is not supported. | The specified ipVersion is not supported. | diagnosis |
| 400 | UnsupportedFeature.Isp | The feature of Isp is not supported. | The specified ISP is not supported. | diagnosis |
| 400 | UnsupportedFeature.ModifyIpv6RouteEntryNextHop | The current region does not support the feature of modifying the IPv6 route next hop. | The operation failed because the current region does not support modifying the next hop of IPv6 routes. | diagnosis |
| 400 | UnsupportedFeature.ModifyRouteEntryNextHop | The current region does not support the function of modifying the route next hop. | The current region does not support modifying the next hop of routes. | diagnosis |
| 400 | UnsupportedFeature.MutilBindedTypeNatEnableFw | The NAT with Mutil-Binded Eip bind type is not support enable firewall. | NAT gateways that have EIPs associated in Multi-Bindied mode do not allow enabling the firewall. | diagnosis |
| 400 | UnsupportedFeature.NatBandWidthPackage | The feature of NatBandWidthPackage is not supported. | Creating NAT service plans is not supported. | diagnosis |
| 400 | UnsupportedFeature.NatQosEntry | The specified natGateway can not support the qos entry feature. | This NAT instance does not support the protective rate limiting feature. | diagnosis |
| 400 | UnsupportedFeature.NextHopType | The route type does not support modifying the next hop of the route. | The current route entry does not support modifying next hop information. | diagnosis |
| 400 | UnsupportedFeature.NextHopType | The operation is not allowed because the NextHopType of specified RouteEntry is modified from Local type. | The operation is not allowed because the next hop type of the route was modified from the Local type. | diagnosis |
| 400 | UnsupportedFeature.NormalNatModifyEipBindMode | The normal NAT gateway is not support to change EIP bond type. | Standard NAT gateways do not support modifying the EIP bindng type. | diagnosis |
| 400 | UnsupportedFeature.NormalTypeNatGateway | Normal nat gateways do not support modifying the next hop of the route. | Route entries that point to standard NAT gateways do not support modifying the next hop. | diagnosis |
| 400 | UnsupportedFeature.PrivateLinkMode | The feature of %s is not supported. | The reverse access feature is not supported. | diagnosis |
| 400 | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. | The specified ReservedType is not supported. | diagnosis |
| 400 | UnsupportedFeature.ReservedType | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. Enter a valid value based on the request parameter specifications. | diagnosis |
| 400 | UnsupportedFeature.RouterInterfaceIpv6 | The feature of ipv6 is not supported for the routerInterface. | The router interface does not support IPv6. | diagnosis |
| 400 | UnsupportedFeature.RouterTableType | The type of router table is not supported. | The specified route table type is not supported. | diagnosis |
| 400 | UnsupportedFeature.RouterType | The feature of route type is not supported. | The specified route table type is not supported. | diagnosis |
| 400 | UnsupportedFeature.UserDefinedTrafficPath | The feature of UserDefinedTrafficPath is not supported. | The custom flow log trafficPath feature is not supported for this user. | diagnosis |
| 400 | UnsupportedFeature.VpcAdvancedFeature | UnsupportedFeature.VpcAdvancedFeature | The VPC to which the specified vSwitch belongs does not support advanced features. Use a different vSwitch and try again. | diagnosis |
| 400 | UnsupportedFeature.VpcAdvancedFeature | The VPC does not support some advanced features. | The VPC does not support certain advanced features. Submit a ticket for assistance. | diagnosis |
| 400 | UnsupportedFeature.VpcDnsHostname | The feature of vpc dns hostname is unsupported. | The VPC private domain resolution feature is not effective in the current region. | diagnosis |
| 400 | UnsupportedFeature.VpcIpamIpv6 | The specified IPAM pool does not support the IPv6 feature. | The specified IPAM pool does not support IPv6. | diagnosis |
| 400 | UnsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not supported to enable security protection. | VPC NAT gateways do not support enabling security protection. | diagnosis |
| 400 | UnsupportedFeature.Vpconn | The feature of Vpconn is not supported. | The Vpconn type is not supported. | diagnosis |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | The peer of this router interface is a VPC. Creating IPv6 routes with this next hop type is not supported in this region. | diagnosis |
| 400 | UnsupportedFeature.VSwitchIpv6 | The ipv6 feature of switch is not supported. | The specified vSwitch does not have IPv6 enabled. | diagnosis |
| 400 | UnsupportedFeature.VSwitchIpv6 | UnsupportedFeature.VSwitchIpv6 | The specified vSwitch does not have IPv6 enabled. | diagnosis |
| UnsupportedParameter | A parameter is set to an invalid value. | diagnosis | ||
| 400 | UnsupportedRegion | The feature of prefixList entry is not supported in this region. | Operating prefix list routes is not supported in this region. | diagnosis |
| 400 | UnsupportedRegion | The feature is not supported in current region. | The current region does not support this feature. | diagnosis |
| 400 | UnsupportedRegion | The feature of ipv4Gateway is not supported in the region. | The region does not support IPv4 gateways. | diagnosis |
| 400 | UnsupportedRegion | UnsupportedRegion | The current region does not support this feature. | diagnosis |
| 400 | UnsupportedRegion.CloudBoxInternet | The region does not support cloud box public network. | The region does not support CloudBox public network. | diagnosis |
| 400 | UnsupportedRegion.PrefixListEntry | The feature of prefixList entry is not supported in this region. | The region does not support prefix list type routes. | diagnosis |
| 404 | UnsupportedZoneForFwNat | The zone is unsupported for FW NAT. | The zone does not support protection-enabled NAT gateways. | diagnosis |
| 400 | VBR.BANDWIDTH.EXCEED | VBR bandwidth exceed for this physical connection. | The bandwidth limit is exceeded. | diagnosis |
| 400 | VbrBandwidthExceed | VBR bandwidth exceed for this physical connection. | The bandwidth of the Virtual Border Router exceeds the threshold of the Express Connect circuit. | diagnosis |
| 400 | Vco.StatusNotSupport | The current VPN connection state does not support this operation. | The current instance status does not support this operation. | diagnosis |
| 400 | Vco.StatusNotSupport | The current VCO status does not support operations such as modification and deletion. | The current status of the VPN customer gateway (VCO) does not support modification or deletion operations. | diagnosis |
| 400 | VLAN.ID.HAS.BEEN.USED.IN.PHYSICAL.CONNECTION | vlan id has been used in physical connection | The VLAN ID is already in use. | diagnosis |
| 400 | VpconnNotAssociatedVbr | The specified vpconn is not associated with vbr. | The specified shared Express Connect circuit is not associated with a Virtual Border Router. | diagnosis |
| 400 | VpconnWithVlan0NotSupportShutdown | The specified virtualPhysicalConnection with vlan 0 does not support shutdown. | Fault simulation is not supported for shared Express Connect circuits with VLAN 0. | diagnosis |
| 400 | VpcRouteConflict | Route conflict exists in routing table. | A route conflict exists in the route table. | diagnosis |
| VpcStatusError | The Vpc is creating . | The VPC is being created. | diagnosis | |
| 400 | VpcSubnet.NotFound | Vpc subnet not exist. | The VPC subnet does not exist. | diagnosis |
| 400 | VpnConnection.Configuring | The specified service is configuring. | The service is being configured. Try again later. | diagnosis |
| 400 | VpnConnection.FinancialLocked | The specified service is financial locked. | The specified service is locked due to overdue payment. | diagnosis |
| 400 | VpnConnection.InvalidCreateTunnelOptions | The master and slave tunnels must be created at the same time. | The active tunnel and standby tunnel must be created at the same time. | diagnosis |
| 400 | VpnConnection.SameVpnAndCgwDifferentIkeConfigs | If the same VPN is not supported, different VPN connections are configured with different Ike configurations when the same customer gateway is used. | Under the same VPN gateway, different IPsec-VPN connections that use the same customer gateway cannot have different IKE configurations. | diagnosis |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs | IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration. | Multiple IPsec-VPN connections are associated with the same VPN gateway and customer gateway. The pre-shared key and IKE phase configuration parameters of the IPsec-VPN connections must be the same. | diagnosis |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap | Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap. | Multiple IPsec-VPN connections are associated with the same VPN gateway and customer gateway. The interesting traffic CIDR blocks of the IPsec-VPN connections cannot overlap. | diagnosis |
| VpnGateway.Configuring | The specified service is configuring. | The service is being configured. Try again later. | diagnosis | |
| 500 | VpnGateway.Configuring | The specified VPN gateway is being configured. | The VPN gateway is being configured. | diagnosis |
| VpnGateway.FinancialLocked | The specified service is financial locked. | The service is suspended due to overdue payments. Top up your account first. | diagnosis | |
| 400 | VpnGateway.IPsecServerAndVpnConnectionConflict | The IPSec connection and IPSec server cannot be configured on the same VPN gateway at the same time. | A VPN gateway does not support configuring both an IPsec server and an IPsec-VPN connection at the same time. | diagnosis |
| 400 | VpnGateway.IpsecVpnDisabled | The vpn gateway does not enable IPSec VPN. | The VPN gateway does not have the IPsec-VPN feature enabled. | diagnosis |
| 400 | VpnGateway.SslVpnDisabled | The VPN gateway has not enabled SSL VPN. | The VPN gateway does not have the SSL-VPN feature enabled. | diagnosis |
| 400 | VpnGateway.task.conflict | The VPN is in the configuration state, please wait a while before operating. | The VPN gateway is being configured. Try again later. | diagnosis |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting pbr route entry priority. | The current version of the VPN gateway does not support the policy route priority feature. | diagnosis |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting custom pbr route entry priority. | The current version of the VPN gateway does not support setting the priority of policy route entries. | diagnosis |
| 400 | VpnRouteEntry.AlreadyExists | The specified route entry is already exist. | The route already exists. | diagnosis |
| 400 | VpnRouteEntry.BackupRoute | Validate backup route entry failed. | The active/standby route entry validation failed. | diagnosis |
| 400 | VpnRouteEntry.Configuring | The specified route entry is configuring. | The specified route entry is being configured. | diagnosis |
| 400 | VpnRouteEntry.Conflict | The specified route entry has conflict. | A route entry conflict exists. | diagnosis |
| 400 | VpnRouteEntry.Conflict | The specified client IP pool conflicts with VPN connection or SSL server. | The specified client IP pool conflicts with a VPN connection or SSL server. | diagnosis |
| 400 | VpnRouteEntry.ConflictSSL | The specified route entry has conflict with SSL client. | The route entry conflicts with an SSL client. | diagnosis |
| 400 | VpnRouteEntry.InvalidWeight | Invalid route entry weight value. | The route weight value is invalid. | diagnosis |
| 400 | VpnRouteEntry.SamePriorityPbrRoutePrefixOverlap | The source CIDR and destination CIDR of Policy-based routes with the same priority cannot overlap. | The VPN gateway does not support multiple policy routes with the same priority that have overlapping source and destination CIDR blocks. | diagnosis |
| 400 | VpnRouteEntry.SrcDestConflict | The VPN gateway does not support Policy-based routing with the same source CIDR and destination CIDR. | A dual-tunnel VPN gateway does not support configuring policy routes with identical source and destination CIDR blocks. | diagnosis |
| 400 | VpnRouteEntry.SrcDestWeightConflict | The VPN gateway does not support Policy-based routing with the same source CIDR, destination CIDR and weight. | The VPN gateway does not support configuring policy routes with identical source CIDR block, destination CIDR block, and weight. | diagnosis |
| 400 | VpnTask.CONFLICT | Vpn task has conflict. | A VPN operation conflict exists. Try again later. | diagnosis |
| VpnUnderStock | There are not enough vpn gateways in stock | The VPN gateway inventory is insufficient. | diagnosis | |
| 404 | VRouterId.NotFound | The VRouter not found. | The specified vRouter instance was not found. | diagnosis |
| VswitchStatusError | The VSwitch is creating . | The operation is not supported when the vSwitch is being created. | diagnosis | |
| ZONE_NO_AVAILABLE_IP | The Zone have no available ip. | No IP address is available in the zone. | diagnosis | |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | An IPv6 address attached to a cloud service instance cannot have Internet bandwidth enabled. | diagnosis |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | The traffic mirroring service is already activated. Do not repeat this operation. | diagnosis |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Insufficient Ipv4Prefix resources. | diagnosis |
| 400 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The Ipv4Prefix resource does not exist. | diagnosis |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | The Ipv4Prefix does not match the reserved CIDR block for a vSwitch. | diagnosis |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | The NatIp parameter is invalid. | diagnosis |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | The Ipv4Prefix parameter is invalid. | diagnosis |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | The Ipv4Prefix has already been allocated. | diagnosis |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | The NatIp resource has already been allocated. | diagnosis |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | The DhcpOptionsSetId parameter is missing. | diagnosis |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | The route target group feature is not supported in the current region. | diagnosis |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | The specified resource %s does not exist. | diagnosis |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | The MinRxInterval parameter is missing. When configuring BFD packets, you must specify the send alert interval, accept alert interval, and detect multiplier parameters together. | diagnosis |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | The MinTxInterval parameter is missing. When configuring BFD packets, you must specify the send alert interval, accept alert interval, and detect multiplier parameters together. | diagnosis |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | The DetectMultiplier parameter is missing. When configuring BFD packets, you must specify the send alert interval, accept alert interval, and detect multiplier parameters together. | diagnosis |
| 400 | OperationFailed.ResourceNotEnough | Insufficient resources. | The requested resources are insufficient. If you still need to apply, submit a ticket. | diagnosis |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | The Ipv4Prefix resource does not exist. | diagnosis |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid. It must be a /28 CIDR block. | diagnosis |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | The NatIp belongs to an Ipv4Prefix and cannot be deleted individually. Delete the Ipv4Prefix instead. | diagnosis |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | The Ipv4Prefix parameter is invalid. It must be a /28 CIDR block. | diagnosis |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | The SnatEntry associated with NatIp or Ipv4Prefix cannot be deleted. Delete the dependent Snat and delete it again. | diagnosis |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | The Ipv4Prefix resource was not found. Check whether the Ipv4Prefix exists. | diagnosis |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | The Ipv4Prefix has already been created. Do not create it again. | diagnosis |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | Instances in a route target group cannot belong to the same zone. | diagnosis |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | Instances in a route target group must be of the same type. | diagnosis |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | The VPC of the route target group does not match the VPC of the configured instance. | diagnosis |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | You cannot update an enabled member in the route target group. | diagnosis |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | The operation is not allowed in the current status of the route target group. | diagnosis |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | You cannot update the instance type of a member in the route target group. | diagnosis |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | A resource associated with the VPC is undergoing a specification change, such as a Cloud Enterprise Network resource. Try again later. | diagnosis |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | A managed network interface controller (NIC) cannot be used as a traffic mirroring source. | diagnosis |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | The VPC route table entry does not exist. | diagnosis |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | The physical port cannot be deleted because a Virtual Border Router exists on it. | diagnosis |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | The deletion failed. The shared port or dedicated port owner must perform the deletion. | diagnosis |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | The operation is not allowed because the current physical port does not support advanced capabilities such as MPBGP and MPBGP-v6. | diagnosis |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | If the maximum number of entries in the prefix list is increased, it will exceed the maximum entry quota of the associated network ACL instance. | diagnosis |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | The IP version specified for the prefix list does not match the actual IP version of the prefix list. | diagnosis |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | The gateway does not support Ipv4Prefix. | diagnosis |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | The Ipv4Prefix quota has been exceeded. | diagnosis |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | The NatIp and Ipv4Prefix quota has been exceeded. | diagnosis |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | The RelationKey parameter is missing. | diagnosis |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | The specified zone is being decommissioned. You cannot create a vSwitch in a zone that is being decommissioned. | diagnosis |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | Member instances in a route target group cannot belong to the same zone. | diagnosis |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | You cannot update the instance type of a member in the route target group. | diagnosis |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | You cannot update enabled members in the route target group. | diagnosis |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | The network ACL is being associated with or disassociated from a vSwitch. | diagnosis |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | The specified zone is disabled. You cannot create a vSwitch in this zone. | diagnosis |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | You cannot update enabled members in the route target group. | diagnosis |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | You cannot perform a primary/secondary switchover because the disabled member is in an abnormal health check state. | diagnosis |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | The specified RegionId does not exist. Check whether this parameter is correct. | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified RegionId is not found. | The specified RegionId does not exist. Check whether the product is available in this region. | diagnosis |
| 400 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | ClassicLink is already enabled for the VPC. | diagnosis |
| 400 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | The VPC cannot be deleted because it still contains cloud service instances that are not deleted. | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist. | The specified region does not exist. Check whether this parameter is correct. | diagnosis |
| 400 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | The current status of the route table does not support the delete operation. | diagnosis |
| 400 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | The router interface cannot be attached to CEN. | diagnosis |
| 400 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | The parameter is invalid. | diagnosis |
| 400 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | The vSwitch has VSwitchCidrReservation in use and cannot be deleted. | diagnosis |
| 400 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | The current region is not supported. | diagnosis |
| 400 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | The system route table cannot be disassociated. | diagnosis |
| 400 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | The operation failed due to a route conflict with an existing routing entry. | diagnosis |
| 400 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | This operation is not allowed on a managed instance. | diagnosis |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | The maximum number of route target groups that can be created in the VPC has been reached. Increase the quota before you proceed. | diagnosis |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | Dual-stack flow log instances do not support the custom trafficPath feature. | diagnosis |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | The specified EIP allocation token has expired. | diagnosis |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | The VLAN of the specified VBR is 0, which does not support fault simulation. Use an Express Connect circuit for fault simulation. | diagnosis |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | The specified AccessIp and AccessDomain parameters conflict with each other. | diagnosis |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | The AccessDomain request parameter is invalid. | diagnosis |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | The error message returned because the IPsec VPN server on specified vpn gateway is not deleted. | diagnosis |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | The current VPN instance does not support policy-based routing. | diagnosis |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | Creating a VpnAttachment with large bandwidth is not supported. | diagnosis |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | The TunnelBandwidth parameter is invalid. | diagnosis |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | The DES and 3DES algorithms do not support multi-algorithm compatibility in IKE encryption algorithms or IPsec encryption algorithms. | diagnosis |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | The specified customer gateway has conflict with vpn gateway ip. | diagnosis |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | IKEv1 does not support configuring only the GCM-16 algorithm as the IKE encryption algorithm. | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | The current status of the Express Connect circuit does not support this operation. | diagnosis |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | The current Express Connect circuit does not support the MACSec feature. | diagnosis |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | The current Express Connect circuit supports MACSec, but does not support the selected encryption algorithm. | diagnosis |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | The operation is not allowed because a MACSec key is in a non-stable state. | diagnosis |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | A maximum of three MACSec key groups can be associated with a single Express Connect circuit. | diagnosis |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | The CKN to be disassociated does not exist. | diagnosis |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | The current Express Connect circuit supports MACSec, but does not support the selected encryption algorithm. | diagnosis |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | The operation is rejected because MACSec keys are still associated with the Express Connect circuit. | diagnosis |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | The current resource is still relied upon by the routing entry. | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | The status of the traffic mirror session destination is invalid. | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | The status of the traffic mirror session source is invalid. | diagnosis |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | The operation failed because the EIP is not associated with this NAT gateway. | diagnosis |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | The operation failed because the IP addresses in the SNAT rule IP address pool are added to multiple bandwidth packages. | diagnosis |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | The SNAT rule is in an intermediate state or has an abnormal status. Try again later. | diagnosis |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | The NatIp is in an intermediate state. Try again later. | diagnosis |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | The operation failed because the EIP is not associated with this NAT gateway. | diagnosis |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | The operation failed because the IP addresses in the SNAT rule IPAM pool are added to multiple NAT service plans. | diagnosis |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | The current region is temporarily not supported. | diagnosis |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | Failed to create the NAT gateway. | diagnosis |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | The route table status does not support this operation. Try again later. | diagnosis |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | The current zone does not support configuring FullNat rules in domain name format. | diagnosis |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | The current instance does not support configuring FullNat rules in domain name format. | diagnosis |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | An order error occurred because the basic parameter information is incomplete. | diagnosis |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | An order error occurred because the billing type parameter is unavailable. | diagnosis |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | The operation failed because the region does not support the pay-as-you-go billing method. | diagnosis |
| 400 | OperationUnsupported.User | The current user does not support this operation. | The current user does not support this operation. | diagnosis |
| 400 | Instance.NotFound | instance not found. | The instance does not exist or does not belong to the current user. | diagnosis |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | The operation failed because some IP addresses in the SNAT rule IP address pool are not added to an Internet Shared Bandwidth instance. | diagnosis |
| 400 | NatInstance.NotFound | Instance not found. | The instance does not exist or does not belong to the current user. | diagnosis |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | This operation does not support the region parameter. | diagnosis |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | Querying the current month's traffic data is not supported in the monthly 95th percentile billing mode. | diagnosis |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | The authorization policy format is invalid. | diagnosis |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | The resource has been locked by the system and cannot be operated on temporarily. | diagnosis |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | Parameter conflict. After an IPv4 CIDR block is specified, creating an IPv6 single-stack vSwitch is not supported. | diagnosis |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | The current user is not allowed to create a single-zone NAT gateway. | diagnosis |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | The VPC is associated with Express Connect Router (ECR) %s and cannot be deleted. | diagnosis |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | The advanced port capability is temporarily not supported. Verify and try again. | diagnosis |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | The VPC IPv4 gateway corresponding to the IP address associated with the EIP is not associated with any gateway route table. | diagnosis |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | The router ID associated with the router interface cannot be empty. Verify and try again. | diagnosis |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | The router interface is in an abnormal state. | diagnosis |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | The router type is invalid. | diagnosis |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | The specified VPN gateway has VPN connections that have not been deleted. | diagnosis |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | The mask of the Cidr parameter or the CidrMask parameter is less than the minimum network mask length in the IPAM pool compliance rule. | diagnosis |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | The mask of the Cidr parameter or the CidrMask parameter exceeds the maximum network mask length in the IPAM pool compliance rule. | diagnosis |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | The NAT gateway is referenced by a route target group. Disabling the ICMP echo reply feature is not allowed. | diagnosis |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | The current NAT gateway is referenced by a route target group. Delete the reference first. | diagnosis |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | The next hop of the IPv6 route does not have an IPv6 address. | diagnosis |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | Route target groups only support single-zone NAT gateways. | diagnosis |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | The NAT gateway in the route target group must have the ICMP echo reply feature enabled to ensure that ICMP probe packets can be responded to properly. | diagnosis |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | The specified region does not support NAT gateways as route target group members. | diagnosis |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | The specified NAT gateway resource was not found when creating or modifying the route target group. | diagnosis |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | The vSwitch information associated with the specified NAT gateway was not found. | diagnosis |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | The current operation does not support route target groups with NAT gateway type members. | diagnosis |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | The IP address does not exist. | diagnosis |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | The parameter EcrInstanceId is missing. | diagnosis |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | The parameter OwnerId is invalid. Verify that the parameter is correct and try again. | diagnosis |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | The deep pagination page-skipping frequency has triggered throttling. Reduce the frequency of deep pagination page-skipping, or use sequential pagination. | diagnosis |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | diagnosis |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | You must specify one of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr. | diagnosis |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber is supported only for the Prefix reservation type. | diagnosis |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | The active zone of the secondary zone vSwitch does not support creating dual-tunnel VPN connections. Use a different vSwitch. | diagnosis |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | The parameter DisasterRecoveryVSwitchId is missing. | diagnosis |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | The vSwitch does not exist in the specified region. | diagnosis |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | When BGP is enabled for the IPsec-VPN connection, an ASN must be configured on the customer gateway. | diagnosis |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | The specified policy-based route does not exist. | diagnosis |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | The operation is rejected because the expanded destination CIDR block overlaps with the existing CIDR block %s of the VPC. | diagnosis |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | The operation is rejected because the destination CIDR block does not overlap with the original CIDR block. CIDR block adjustment requires an overlap between the two. | diagnosis |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | A required parameter is missing. You must specify at least one of CidrBlock or SecondaryCidrBlock. | diagnosis |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | The operation is rejected because the reduced destination CIDR block does not cover the existing vSwitch CIDR block %s. | diagnosis |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | The operation is rejected because the destination CIDR block is the same as the original CIDR block. No modification is required. | diagnosis |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | The NewSecondaryCidrBlock parameter must be specified when modifying a secondary CIDR block. | diagnosis |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | The operation is rejected because the specified secondary CIDR block does not exist in the current VPC. | diagnosis |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | The parameters CidrBlock and SecondaryCidrBlock are mutually exclusive and cannot be specified at the same time. | diagnosis |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | Failed to create the Express Connect circuit. No access device matches the specified advanced device capabilities. | diagnosis |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | Failed to create the Express Connect circuit. No access device matches the specified optical module. | diagnosis |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | Failed to create the Express Connect circuit. No eligible access device was found after excluding redundant circuits. | diagnosis |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | CidrBlock is mutually exclusive with Ipv6Only. | CidrBlock or CidrMask cannot be specified in Ipv6Only mode. | diagnosis |
| 400 | Mismatch.ParamIpv6IspAndIpamPoolIpv6Isp | The specified IPv6 ISP %s does not match the IPAM pool's IPv6 ISP %s. | The specified IPv6 ISP %s does not match the IPv6 ISP %s of the IPAM pool. | diagnosis |
| 400 | OperationDenied.Ipv6CidrBlockAndMaskMutuallyExclusive | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. | Ipv6CidrBlock and Ipv6CidrMask cannot be specified at the same time. | diagnosis |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The operation is not allowed because of %s. | The specified IPv6 mask is invalid. Only %s is supported. | diagnosis |
| 400 | MissingParam.CidrBlockOrCidrMask | Either CidrBlock or CidrMask must be specified. | You must specify at least one of CidrBlock or CidrMask. | diagnosis |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Either Ipv6CidrBlock or Ipv6CidrMask must be specified. | You must specify at least one of Ipv6CidrBlock or Ipv6CidrMask. | diagnosis |
| 400 | OperationDenied.AvailableCidrInsufficient | No available CIDR block can be allocated from the VPC. | The VPC does not have available CIDR space for allocation. | diagnosis |
| 400 | OperationDenied.CidrBlockAndMaskMutuallyExclusive | CidrBlock and CidrMask are mutually exclusive. | CidrBlock and CidrMask cannot be specified at the same time. | diagnosis |
| 400 | OperationDenied.HasSecondaryZone | VSwitch has secondary zone can not operate IPv6. | IPv6 operations are not allowed when the vSwitch has a secondary zone configured. | diagnosis |
| 400 | OperationDenied.OriginalCidrNotFound | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | The specified original CIDR block is not a primary or secondary CIDR block of the VPC. | diagnosis |
| 400 | IncorrectBusinessStatus.PhysicalConnection | Invalid physical connection business status. | The current business status of the Express Connect circuit does not support this operation. | diagnosis |
| 400 | UnsupportedFeature.DownDelayTime | DownDelayTime is not supported for VirtualPhysicalConnection. | Shared Express Connect circuits do not support configuring status switchover delay commands. | diagnosis |
| 400 | InvalidParam.DownDelayTime | The DownDelayTime value is invalid. | The value of the state transition delay parameter is invalid. | diagnosis |
| 400 | UnsupportedFeature.LinkDelay.Device | The access device does not support LinkDelay configuration. | The access device does not support the LinkDelay feature. | diagnosis |
| 400 | UnsupportedFeature.LinkDelay | The feature of LinkDelay is not supported. | The state transition delay command is not currently supported. | diagnosis |
| 400 | UnsupportedFeature.LinkDelay.Region | LinkDelay feature is not enabled in region. | The state switch delay command attribute enabling status is not turned on in the current region. | diagnosis |
| 400 | Forbidden.MinimumHoldingPeriod | The EIP is within its minimum holding period. | A Local ISP resource can only be released 30 days after creation. To delete it, try again after 30 days. | diagnosis |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of %s is exceeded, usage %s/%s. | The IP address quota for the address pool has been exceeded. To increase the quota, submit a ticket or contact your account manager. | diagnosis |
| 400 | QuotaExceeded.EipQuota | The quota of %s is exceeded, usage %s/%s. | The EIP quota has been exceeded. To increase the quota, submit a ticket or contact your account manager. | diagnosis |
| 400 | EquivalentCuExceeds.Maximum | Equivalent CU %s exceeds maximum %s. | The equivalent CU count exceeds the maximum limit. | diagnosis |
| 400 | InvalidCu.ExceedMaximum | CU %s exceeds maximum %s. | The CU count exceeds the maximum limit. | diagnosis |
| 400 | InvalidCu.BelowMinimum | CU %s is below minimum %s. | The CU count is below the minimum limit. | diagnosis |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Ipv6CidrBlock or Ipv6CidrMask must be specified. | You must specify either Ipv6CidrBlock or Ipv6CidrMask. | diagnosis |
| 400 | ParamExclusive.CidrBlockAndCidrMask | CidrBlock and CidrMask are mutually exclusive. | The CidrBlock and CidrMask parameters are mutually exclusive. | diagnosis |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The specified Ipv6CidrMask is invalid, only %s is allowed. | The specified Ipv6CidrMask is invalid. Only %s is allowed. | diagnosis |
| 400 | OperationDenied.AvailableCidrInsufficient | Insufficient available CIDR blocks for allocation. This is either because the VPC has no remaining address space, or because the candidate CIDR contains destination networks of active non-system routes in the VPC. | Insufficient available CIDR blocks for allocation. The VPC address space may be exhausted, or the candidate CIDR blocks overlap with destination CIDR blocks of non-system routes that are effective in the VPC. | diagnosis |
| 400 | OperationDenied.VpcIpv6CidrBlockNotExist | The specified VpcIpv6CidrBlock does not exist in the VPC. | The specified VpcIpv6CidrBlock does not exist in the VPC. | diagnosis |
| 400 | IllegalParam.OriginalCidr | The specified OriginalCidr is not a valid IPv4 CIDR block. | The specified OriginalCidr is not a valid IPv4 CIDR block. | diagnosis |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask must be specified. | You must specify either CidrBlock or CidrMask. | diagnosis |
| 400 | Forbidden.OperateShareResource | The operation is forbidden because the resource is shared. | The operation is prohibited because the resource is a shared resource. | diagnosis |
| 400 | OperationDenied.HasSecondaryZone | The operation is not allowed because the VSwitch has a secondary zone. | The operation is not allowed because the vSwitch has a standby zone. | diagnosis |
| 400 | DependencyViolation.NATGW | Nat gateway exists in the VSwitch, so the VSwitch cannot be deleted. | The vSwitch cannot be deleted because it still contains NAT gateways that have not been deleted. Delete the NAT gateways associated with the vSwitch first. | diagnosis |
| 400 | IncorrectStatus.RouteTableStatus | Route table [%s] status [%s] is not stable. Please try again later. | The route table [%s] is in [%s] status and has not reached a stable state. Try again later. | diagnosis |
| 500 | ParamExclusive.SourceVSwitchIdAndsourceCIDR | Parameters sourceVSwitchId and sourceCIDR are conflicted. | The parameters sourceVSwitchId and sourceCIDR conflict with each other. You can specify only one of them. | diagnosis |
| 400 | OperationDenied.PrefixList | The prefix list is created by ECS and cannot be modified via VPC API. | The prefix list was created by ECS and cannot be modified through VPC API operations. | diagnosis |
| 400 | InvalidParam.RouterInstanceOrRouterId | The parameters routerInstanceId and routerId are mutually exclusive. Please use either routerInstanceId alone, or routerType with routerId. | The request contains conflicting parameters. You must provide either routerInstanceId alone, or both routerType and routerId together. Remove the conflicting parameter combination from the request. | diagnosis |