Data Transmission Service (DTS) supports one-way data synchronization between Redis clusters. This feature is applicable to scenarios such as data migration, active geo-redundancy, and geo-disaster recovery. This topic describes how to configure one-way data synchronization from a self-managed Redis cluster to an ApsaraDB for Redis cluster instance.

You can also follow the procedure to configure data synchronization from an ApsaraDB for Redis cluster instance to a self-managed Redis cluster. However, you must configure parameters for the source and destination instances based on the actual scenarios.

Warning After you configure a data synchronization task, do not change the architecture type of the source or destination database. For example, if you change the master-replica architecture to the cluster architecture, data synchronization fails. For more information about the architecture types, see https://www.alibabacloud.com/help/zh/doc-detail/86132.htm.

Prerequisites

  • The database version of the self-managed Redis cluster is 2.8, 3.0, 3.2, 4.0, or 5.0.
    Note The database version of the destination ApsaraDB for Redis cluster instance can be 2.8, 4.0, or 5.0. The version of the destination database must be the same as or later than the version of the source database. If you synchronize data between different versions of Redis databases, make sure that the versions of the source and destination databases are compatible. You can create a pay-as-you-go ApsaraDB for Redis cluster instance to verify database compatibility. After verification, you can release the instance or change the billing method to subscription.
  • The available storage space of the destination ApsaraDB for Redis cluster instance is larger than the total size of the data in the source Redis database.
  • All nodes of the source Redis cluster support the PSYNC command and share the same password.

Precautions

  • DTS uses the resources of the source and destination instances during initial full data synchronization. This may increase the loads of the database servers. If you migrate a large amount of data or if the server specifications cannot meet your requirements, database services may become unavailable. Before you synchronize data, evaluate the impact of data synchronization on the performance of the source and destination instances. We recommend that you synchronize data during off-peak hours.
  • To ensure the stability of data synchronization, we recommend that you increase the value of the repl-backlog-size parameter in the redis.conf file.
  • To ensure the synchronization quality, DTS adds the following key to the source Redis database: DTS_REDIS_TIMESTAMP_HEARTBEAT. This key is used to record the time when data is synchronized to ApsaraDB for Redis.
  • We recommend that you do not run the FLUSHDB or FLUSHALL command in the source Redis cluster. Otherwise, data may become inconsistent between the source and destination databases.
  • If the data eviction policy (maxmemory-policy) of the destination instance is not set to noeviction, data inconsistency may occur between the source and destination instances. For more information about data eviction policies, see How does ApsaraDB for Redis evict data by default?
  • If an expiration policy is enabled for some keys in the source database, these keys may not be deleted in a timely manner after they expired. Therefore, the number of keys in the destination database may be less than that in the source database. You can run the info command to view the number of keys in the destination database.
    Note The number of keys that do not have an expiration policy or have not expired is the same in the source and destination databases.
  • During data synchronization, if the number of shards in the self-managed Redis database is increased or decreased, or if the specifications of the database are changed (for example, the memory capacity is scaled up), you must reconfigure the task. To ensure data consistency, we recommend that you clear the data that has been synchronized to the destination Redis database before you reconfigure the task.
  • During data synchronization, if the endpoint of the self-managed Redis database is changed, you must submit a ticket to update the change. Otherwise, the append-only files (AOF) of the self-managed Redis database may be reset. In this case, you must reconfigure the task.
  • Limits on synchronizing a standalone ApsaraDB for Redis instance to an ApsaraDB for Redis cluster instance: Each command can be run only on a single slot in an ApsaraDB for Redis cluster instance. If you perform operations on multiple keys in the source database and the keys belong to different slots, an error occurs.
    CROSSSLOT Keys in request don't hash to the same slot
    We recommend that you perform operations on only one key during data synchronization. Otherwise, the synchronization task will be interrupted.

Supported synchronization topologies

  • One-way one-to-one synchronization
  • One-way one-to-many synchronization
  • One-way cascade synchronization

For more information, see Synchronization topologies.

SQL operations that can be synchronized

  • APPEND
  • BITOP, BLPOP, BRPOP, and BRPOPLPUSH
  • DECR, DECRBY, and DEL
  • EVAL, EVALSHA, EXEC, EXPIRE, and EXPIREAT
  • GEOADD and GETSET
  • HDEL, HINCRBY, HINCRBYFLOAT, HMSET, HSET, and HSETNX
  • INCR, INCRBY, and INCRBYFLOAT
  • LINSERT, LPOP, LPUSH, LPUSHX, LREM, LSET, and LTRIM
  • MOVE, MSET, MSETNX, and MULTI
  • PERSIST, PEXPIRE, PEXPIREAT, PFADD, PFMERGE, and PSETEX
  • RENAME, RENAMENX, RESTORE, RPOP, RPOPLPUSH, RPUSH, and RPUSHX
  • SADD, SDIFFSTORE, SELECT, SET, SETBIT, SETEX, SETNX, SETRANGE, SINTERSTORE, SMOVE, SPOP, SREM, and SUNIONSTORE
  • ZADD, ZINCRBY, ZINTERSTORE, ZREM, ZREMRANGEBYLEX, ZUNIONSTORE, ZREMRANGEBYRANK, and ZREMRANGEBYSCORE
  • SWAPDB and UNLINK (supported only if the engine version of the source instance is 4.0)
Note
  • PUBLISH operations cannot be synchronized.
  • If you run the EVAL or EVALSHA command to call Lua scripts, DTS cannot identify whether these Lua scripts are executed on the destination instance. This is because the destination instance does not explicitly return the execution results of Lua scripts during incremental data synchronization.
  • When DTS runs the SYNC or PSYNC command to transfer data of the LIST type, DTS does not clear the existing data in the destination instance. As a result, the destination instance may contain duplicate data records.

Procedure

  1. Purchase a data synchronization instance.
    Note On the buy page, set both Source Instance and Destination Instance to Redis.
  2. Log on to the DTS console.
  3. In the left-side navigation pane, click Data Synchronization.
  4. At the top of the Synchronization Tasks page, select the region where the destination instance resides.
  5. Find the data synchronization instance and click Configure Synchronization Channel in the Actions column.
  6. Configure the source and destination instances.
    Section Parameter Description
    N/A Synchronization Task Name DTS automatically generates a task name. We recommend that you specify an informative name for easy identification. You do not need to use a unique task name.
    Source Instance Details Instance Type Select User-Created Database in ECS Instance. You can select User-Created Database in ECS Instance or User-Created Database Connected Over Express Connect, VPN Gateway, or Smart Access Gateway based on the type of the source database.

    The procedure in this topic uses User-Created Database in ECS Instance as an example. You can also follow the procedure to configure data synchronization tasks for other types of self-managed Redis databases.

    Instance Region The source region that you selected on the buy page. You cannot change the value of this parameter.
    ECS Instance ID Select the ID of the Elastic Compute Service (ECS) instance where a master node in the self-managed Redis cluster resides.
    Database Type The value of this parameter is set to Redis.
    Instance Mode Select Cluster.
    Port Number Enter the service port number of a master node in the self-managed Redis cluster. In this example, enter 7000.
    Database Password Enter the password that is used to log on to the self-managed Redis database.
    Note This parameter is optional and can be left blank if no database password is set.
    Destination Instance Details Instance Type Select Redis Instance.
    Instance Region The destination region that you selected on the buy page. You cannot change the value of this parameter.
    Instance ID Select the ID of the destination ApsaraDB for Redis cluster instance.
    Database Password Enter the database password of the destination ApsaraDB for Redis cluster instance.
    Note The database password is in the <user>:<password> format. For example, if the username of a custom account is admin and the password is Rp829dlwa, the database password is admin:Rp829dlwa.
  7. In the lower-right corner of the page, click Set Whitelist and Next.
    Note DTS adds the CIDR blocks of DTS servers to the inbound rule of the source ECS instance and the whitelist of the destination ApsaraDB for Redis cluster instance. This ensures that DTS servers can connect to the source and destination instances.
  8. Select the processing mode of conflicting tables and the objects to synchronize. Select the processing mode and objects to synchronize
    Setting Description
    Select the processing mode of conflicting tables
    • Pre-check and Intercept: checks whether the destination instance is empty. If the destination instance is empty, the precheck is passed. If the instance is not empty, an error is returned during the precheck and the data synchronization task cannot be started.
    • Ignore: skips the check for empty destination instances.
      Warning If you select Ignore, data records in the source instance overwrite the data records that have the same keys in the destination instance. Proceed with caution.
    Select the objects to synchronize
    • Select one or more databases from the Available section and click the icon to add the databases to the Selected section.
    • You can select only databases as objects to synchronize. Keys cannot be selected as objects to synchronize.
    Rename Databases and Tables In this scenario, you cannot rename objects.
    Replicate Temporary Tables When DMS Performs DDL Operations
    If you use Data Management (DMS) to perform online DDL operations on the source database, you can specify whether to synchronize temporary tables generated by online DDL operations.
    • Yes: DTS synchronizes the data of temporary tables generated by online DDL operations.
      Note If online DDL operations generate a large amount of data, the data synchronization task may be delayed.
    • No: DTS does not synchronize the data of temporary tables generated by online DDL operations. Only the original DDL data of the source database is synchronized.
      Note If you select No, the tables in the destination database may be locked.
    Retry Time for Failed Connections
    By default, if DTS fails to connect to the source or destination database, DTS retries within the next 720 minutes (12 hours). You can specify the retry time based on your needs. If DTS reconnects to the source and destination databases within the specified time, DTS resumes the data synchronization task. Otherwise, the data synchronization task fails.
    Note When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time based on your business needs. You can also release the DTS instance at your earliest opportunity after the source and destination instances are released.
  9. In the lower-right corner of the page, click Next.
  10. Select initial synchronization types. The value is set to Include full data + incremental data and cannot be changed. Select initial synchronization types
    Note
    • DTS synchronizes historical data from the source instance to the destination instance. Then, DTS synchronizes incremental data.
    • If a version-related error message is displayed, you must upgrade the source instance to a specified version. For more information about how to upgrade the version, see Upgrade the major version and Update the minor version.
  11. In the lower-right corner of the page, click Precheck.
    Note
    • Before you can start the data synchronization task, DTS performs a precheck. You can start the data synchronization task only after the task passes the precheck.
    • If the task fails to pass the precheck, you can click the Info icon icon next to each failed item to view details.
      • You can troubleshoot the issues based on the causes and run a precheck again.
      • If you do not need to troubleshoot the issues, you can ignore failed items and run a precheck again.
  12. Close the Precheck dialog box after the The precheck is passed. message is displayed in the Precheck dialog box. Then, the data synchronization task starts.
  13. Wait until initial synchronization is complete and the data synchronization task enters the Synchronizing state. State of the data synchronization task
    Note You can view the state of the data synchronization task on the Synchronization Tasks page.