An SAG-100WM device supports Wi-Fi connections. This enables your mobile terminals to connect private networks to Alibaba Cloud more conveniently. This topic describes how to enable wireless connections for an SAG-100WM device in the Smart Access Gateway (SAG) console.

Prerequisites

An SAG-100WM device is used.

Procedure

  1. Log on to the Smart Access Gateway console.
  2. Choose one of the following methods to open the Device Management tab.
    • Click the ID of the target SAG instance. On the instance details page that appears, click Device Management.
    • Find the target SAG instance. In the Actions column, choose The More icon > Device Management.
  3. On the Device Management tab, click Manage LAN Ports.
  4. In the LAN-Wireless section, click Edit.
  5. On the WiFi Settings page that appears, set the following parameters to enable Wi-Fi connections.
    Parameter Description
    SSID The name of the LAN.

    The SSID must be 1 to 31 characters in length, and can contain digits and letters.
    SSID Broadcast You must enable SSID broadcast before other wireless devices can receive the Wi-Fi signals.
    Channel The Wi-Fi channel. Valid values: 0 to 11.
    Bandwidth An SAG-100WM device supports the following channel bandwidth:
    • Automatic.
    • 20MHz.
    • 40MHz.
    WiFi Security
    • If this switch is on, you can specify a password to allow specific users to connect to your network over Wi-Fi.
    • If this switch is off, no password is required. Any user can connect to your network over Wi-Fi.
    Authentication Type An SAG-100WM device supports the following two authentication types. We recommend that you select WPA2-PSK, which is more secure.
    • WPA-PSK.
    • WPA2-PSK.
    Encryption Algorithm An SAG-100WM device supports the following encryption algorithms:
    • Automatic: the automatic encryption algorithm.
    • TKIP: Temporal Key Integrity Protocol.
    • AES: Advanced Encryption Standard.
    Password Specify the password to allow specific users to connect to the Wi-Fi.

    The password must be 8 to 32 characters in length, and can contain digits and letters.
    Confirm Password Enter the specified password again to confirm it.
  6. Click OK.