This topic describes how to track data changes from a Data Management (DMS) logical database by using Data Transmission Service (DTS).

Prerequisites

A DMS logical database is configured. For more information, see Logical database.
Note A DMS logical database is created based on the database shards of multiple PolarDB for MySQL clusters.

Limits

Category Description
Limits on the source database
  • The source tables must have PRIMARY KEY or UNIQUE constraints and all fields must be unique. Otherwise, part of the tracked data changes may be duplicate.
  • If you select tables as the objects to track, up to 500 tables can be tracked in a single change tracking task. If you run a task to track more than 500 tables, a request error occurs. In this case, we recommend that you split the tables and configure multiple tasks to track the tables, or configure a change tracking task for the entire database.
  • The following requirements for binary logs must be met:
    • The binary logging feature must be enabled. The value of the binlog_row_image parameter must be set to full.
    • The binary logs of the source database must be stored for more than 24 hours. Otherwise, DTS may fail to obtain the binary logs and the task may fail. In exceptional circumstances, data inconsistency or loss may occur. Make sure that you set the retention period of binary logs based on the preceding requirements. Otherwise, the Service Level Agreement (SLA) of DTS does not ensure service reliability or performance.
Other limits
  • You must make sure that the precision settings for columns of the FLOAT or DOUBLE data type meet your business requirements. DTS uses the ROUND(COLUMN,PRECISION) function to retrieve values from columns of the FLOAT or DOUBLE data type. If you do not specify a precision, DTS sets the precision for the FLOAT data type to 38 digits and the precision for the DOUBLE data type to 308 digits.
  • DTS does not track the DDL operations that are performed by using gh-ost or pt-online-schema-change. Therefore, the change tracking client may fail to write the consumed data to the destination tables due to schema conflicts.
  • An ApsaraDB RDS for MySQL instance is created. For more information, see Create an ApsaraDB RDS for MySQL instance.

Procedure

  1. Go to the Change Tracking page of the new DTS console.
  2. In the left-side navigation pane, click Change Tracking.
  3. On the Change Tracking page, select the region in which you want to create the change tracking task.
  4. Click Create Task. On the page that appears, configure the source database and the consumer network type.
    Warning After you select the source instance, we recommend that you read the limits displayed at the top of the page. This helps you create and run the change tracking task.
    Section Parameter Description
    N/A Task Name

    DTS automatically generates a task name. We recommend that you specify an informative name to identify the task. You do not need to use a unique task name.

    Source Database Select Template
    You can choose whether to use a database connection template.
    • If you use a connection template, DTS automatically applies the parameter settings of the source database.
      Note
      • You can modify the parameter settings of a connection template.
      • To edit the template name, you can click Edit Template Name at the bottom of the Source Database section.
      • The modified connection template will take effect the next time you select the connection template. The database instance that you have configured by using the template is not affected.
    • If you do not use a connection template, you must set parameters for the source database.
    Database Type Select DMS LogicDB.
    Access Method Select Alibaba Cloud Instance.
    Instance Region Select the region in which the DMS logical database resides.
    DMS LogicDB Select the name of the DMS logical database.
    Database Account Enter the username that is used to access the DMS logical database. The PolarDB for MySQL clusters that host the DMS physical databases must share the same username and password. Each cluster must have read permissions on the corresponding physical database. For more information, see Create a database account.
    Database Password

    Enter the password of the database account.

    Consumer Network Type
    • Classic
    • VPC
    Select the network type of the change tracking instance.
    Note
    • If your change tracking client is deployed on a local server, you can select Classic or VPC.
    • If your change tracking client is deployed on an ECS instance, we recommend that you select the network of the ECS instance. For example, if the ECS instance is deployed in a VPC, select VPC as the network type and specify the VPC and vSwitch parameters.
    • If you track data changes over internal networks, the network latency is minimal.
    • Classic

      If you select Classic, no other configurations are required. For more information, see Classic network.

    • VPC

      If you select VPC, you must specify the VPC and vSwitch parameters. For more information, see VPCs.

    Notice After a change tracking task is configured, you cannot change the network type. Data changes are tracked and consumed over the specified type of network.
  5. In the lower part of the page, click Test Connectivity and Proceed.
  6. Select objects for the task and configure advanced settings.
    • Basic Settings
      Parameter Description
      Data Change Types
      • Data Update

        DTS tracks data updates of the selected objects, including the INSERT, DELETE, and UPDATE operations.

      • Schema Update

        DTS tracks the create, delete, and modify operations that are performed on all object schemas of the source instance. You must use the change tracking client to filter the required data.

      Source Objects
      Select one or more objects from the Source Objects section and click the Rightwards arrow icon to move the objects to the Selected Objects section.
      Note You can select tables or databases as the objects for change tracking.
      • If you select a database as the object, DTS tracks data changes of all objects, including new objects in the database.
      • If you select a table as the object, DTS tracks only data changes of this table. In this case, if you want to track data changes of another table, you must add the table to the selected objects. For more information, see Modify the objects for change tracking.
    • Advanced Settings
      Parameter Description
      Set Alerts
      Specify whether to set alerts for the change tracking task. If the task fails or the latency exceeds the threshold, the alert contacts will receive notifications.
      • Select No if you do not want to set alerts.
      • Select Yes to set alerts. In this case, you must also set the alert threshold and alert contacts.
      Retry Time for Failed Connections
      Specify the retry time for failed connections. Valid values: 10 to 1440. Unit: minutes. Default value: 120. We recommend that you set the retry time to more than 30 minutes. If DTS reconnects to the source and destination databases within the specified time, DTS resumes the change tracking task. Otherwise, the change tracking task fails.
      Note
      • If multiple DTS instances have the same source or destination database, the lowest value takes effect. For example, the retry time is set to 30 minutes for Instance A and 60 minutes for Instance B, DTS retries failed connections at an interval of 30 minutes.
      • When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time based on your business needs. You can also release the DTS instance at your earliest opportunity after the source and destination instances are released.
      Configure ETL Select whether to configure the extract, transform, and load (ETL) feature. For more information about ETL, see What is ETL?. Valid values:
      • Yes: configures the ETL feature. You can enter data processing statements in the code editor.
      • No: does not configure the ETL feature.
  7. Click Next: Save Task Settings and Precheck in the lower part of the page.
    Note
    • Before you can start the change tracking task, DTS performs a precheck. You can start the change tracking task only after the task passes the precheck.
    • If the task fails to pass the precheck, you can click the Info icon icon next to each failed item to view details.
      • You can troubleshoot the issues based on the causes and run a precheck again.
      • If you do not need to troubleshoot the issues, you can ignore failed items and run a precheck again.
  8. Wait until the Success Rate becomes 100%. Then, click Next: Purchase Instance.
  9. On the Purchase Instance page, specify the billing method of the change tracking instance. The following table describes the parameters.
    Parameter Description
    Billing Method
    • Subscription: You can pay for your subscription when you create an instance. We recommend that you select the subscription billing method for long-term use because it is more cost-effective than the pay-as-you-go billing method. You can save more costs with longer subscription periods.
    • Pay-as-you-go: A pay-as-you-go instance is billed on an hourly basis. We recommend that you select the pay-as-you-go billing method for short-term use. If you no longer require your pay-as-you-go instance, you can release it to reduce costs.
    Billing Type of Change Tracking Instance

    If you select the subscription billing method, you can select only USD 120 per month for configuration fee (no data traffic fee) as the billing type of the change tracking instance.

    Subscription Length
    If you select the subscription billing method, set the subscription length and the number of instances that you want to create. The subscription length can be one to nine months or one to three years.
    Note This parameter is available only if you select the subscription billing method.
    Note When a client accesses the change tracking instance over the Internet, DTS charges Internet traffic fee.
  10. Read and select Data Transmission Service (Pay-as-you-go) Service Terms.
  11. Click Buy and Start to start the change tracking task. You can view the progress of the task in the task list.