:Configure a data migration task by using the new DTS console

Usage notes

This topic provides a general procedure for configuring a data migration task. The procedure varies with the source and destination databases. For more information, see Overview of data migration scenarios.

Preparations

• If the source or destination database is a self-managed database, you must deploy the network environment for the database. For more information, see Preparation overview.

• Make sure that the source and destination instances are created and the database engine versions are supported by DTS. For more information about the supported database engine versions, see Overview of data migration scenarios.

Procedure

1. Go to the Data Migration Tasks page.
   1. Log on to the Data Management (DMS) console.
   2. In the top navigation bar, click DTS.
   3. In the left-side navigation pane, choose DTS (DTS) > Data Migration.
   Note

   • Operations may vary based on the mode and layout of the DMS console. For more information, see Simple mode and Customize the layout and style of the DMS console.
   • You can also go to the Data Migration Tasks page of the new DTS console.
2. From the drop-down list next to Data Migration Tasks, select the region in which the data migration instance resides.
   Note If you use the new DTS console, you must select the region in which the data migration instance resides in the upper-left corner.

3. Click Create Task. In the Create Task wizard, configure the source and destination databases.

   Configure the source and destination databases based on your business requirements. For more information, see the relevant topics listed in Overview of data migration scenarios.

   Warning

   After you configure the source and destination databases, we recommend that you read the limits that are displayed in the upper part of the page. Otherwise, the task may fail or data inconsistency may occur.

4. In the lower part of the page, click Test Connectivity and Proceed.

   If the source or destination database is an Alibaba Cloud database instance, such as an ApsaraDB RDS for MySQL or ApsaraDB for MongoDB instance, DTS automatically adds the CIDR blocks of DTS servers to the IP address whitelist of the instance. If the source or destination database is a self-managed database hosted on an Elastic Compute Service (ECS) instance, DTS automatically adds the CIDR blocks of DTS servers to the security group rules of the ECS instance, and you must make sure that the ECS instance can access the database. If the self-managed database is hosted on multiple ECS instances, you must manually add the CIDR blocks of DTS servers to the security group rules of each ECS instance. If the source or destination database is a self-managed database that is deployed in a data center or provided by a third-party cloud service provider, you must manually add the CIDR blocks of DTS servers to the IP address whitelist of the database to allow DTS to access the database. For more information, see the "CIDR blocks of DTS servers" section of the Add the CIDR blocks of DTS servers to the security settings of on-premises databases topic.

   Warning

   If the public CIDR blocks of DTS servers are automatically or manually added to the IP address whitelist of a database instance or to the security group rules of an ECS instance, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhancing the security of your account and password, limiting the ports that are exposed, authenticating API calls, regularly checking the IP address whitelist or ECS security group rules and forbidding unauthorized CIDR blocks, and connecting the database to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.

5. Configure the objects to be migrated and advanced settings.

   Note

   The parameter configurations described in the following table are for reference only. The parameters that are displayed in the console prevail.

   Parameter	Description
   Migration Types	Select the migration types based on your business requirements. The migration types must be supported by the database engine.
   Processing Mode of Conflicting Tables	Precheck and Report Errors: checks whether the destination database contains tables that have the same names as tables in the source database. If the source and destination databases do not contain tables that have identical table names, the precheck is passed. Otherwise, an error is returned during the precheck and the data migration task cannot be started. Note You can use the object name mapping feature to rename the tables that are migrated to the destination database. You can use this feature if the source and destination databases contain tables that have identical table names and the tables in the destination database cannot be deleted or renamed. For more information, see Map object names. Ignore Errors and Proceed: skips the precheck for identical table names in the source and destination databases. Warning If you select Ignore Errors and Proceed, data inconsistency may occur and your business may be exposed to the following potential risks: If the source and destination databases have the same schemas, DTS does not migrate data records that have the same primary key values as data records in the destination database. If the source and destination databases have different schemas, only specific columns are migrated or the data migration task fails. Proceed with caution.
   Capitalization of Object Names in Destination Instance	The capitalization of database names, table names, and column names in the destination instance. By default, DTS default policy is selected. You can select other options to make sure that the capitalization of object names is consistent with that in the source or destination database. For more information, see Specify the capitalization of object names in the destination instance.
   Source Objects	Select one or more objects from the Source Objects section and click the icon to add the objects to the Selected Objects section.
   Selected Objects	To rename an object that you want to migrate to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object. To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time. Note If you use the object name mapping feature to rename an object, other objects that depend on the object may fail to be migrated. To specify WHERE conditions to filter data, right-click a table in the Selected Objects section. In the dialog box that appears, specify the conditions. For more information, see Set filter conditions. To select the SQL operations that are performed on a specific database or table, right-click the object in the Selected Objects section. In the dialog box that appears, select the SQL operations that you want to incrementally migrate.

6. Click Next: Advanced Settings to configure advanced settings.

   Note

   The parameter configurations described in the following table are for reference only. The parameters that are displayed in the console prevail.

   • Data Verification Settings

     For more information about how to use the data verification feature, see Enable data verification.

   • Advanced Settings

     Parameter	Description
     Select the dedicated cluster used to schedule the task	By default, DTS schedules the data migration task to the shared cluster if you do not specify a dedicated cluster. You can also purchase and specify a dedicated cluster of the required specifications to run the data migration task. For more information, see What is a DTS dedicated cluster.
     Retry Time for Failed Connections	The retry time range for failed connections. If the source or destination database fails to be connected after the data migration task is started, DTS immediately retries a connection within the retry time range. Valid values: 10 to 1440. Unit: minutes. Default value: 720. We recommend that you set the parameter to a value greater than 30. If DTS is reconnected to the source and destination databases within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Note If you specify different retry time ranges for multiple data migration tasks that share the same source or destination database, the value that is specified later takes precedence. When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time range based on your business requirements. You can also release the DTS instance at your earliest opportunity after the source and destination instances are released.
     The wait time before a retry when other issues occur in the source and destination databases.	The retry time range for other issues. For example, if DDL or DML operations fail to be performed after the data migration task is started, DTS immediately retries the operations within the retry time range. Valid values: 1 to 1440. Unit: minutes. Default value: 10. We recommend that you set the parameter to a value greater than 10. If the failed operations are successfully performed within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Important The value of the The wait time before a retry when other issues occur in the source and destination databases parameter must be smaller than the value of the Retry Time for Failed Connections parameter.
     Enable Throttling for Full Data Migration	Specifies whether to enable throttling for full data migration. During full data migration, DTS uses the read and write resources of the source and destination databases. This may increase the loads of the database servers. You can enable throttling for full data migration based on your business requirements. To configure throttling, you must configure the Queries per second (QPS) to the source database, RPS of Full Data Migration, and Data migration speed for full migration (MB/s) parameters. This reduces the loads of the destination database server. Note This parameter is displayed only when Full Data Migration is selected as Migration Types.
     Enable Throttling for Incremental Data Migration	Specifies whether to enable throttling for incremental data migration. To configure throttling, you must configure the RPS of Incremental Data Migration and Data migration speed for incremental migration (MB/s) parameters. This reduces the loads of the destination database server. Note This parameter is displayed only when Incremental Data Migration is selected as Migration Types.
     Environment Tag	The environment tag that is used to identify the DTS instance. You can select an environment tag based on your business requirements. In this example, no environment tag is added.
     Configure ETL	Specifies whether to enable the extract, transform, and load (ETL) feature. For more information, see What is ETL? Valid values: Yes: configures the ETL feature. You can enter data processing statements in the code editor. For more information, see Configure ETL in a data migration or data synchronization task. No: does not configure the ETL feature.
     Monitoring and Alerting	Specifies whether to configure alerting for the data migration task. If the task fails or the migration latency exceeds the specified threshold, the alert contacts will receive notifications. Valid values: No: does not configure alerting. Yes: configures alerting. If you select Yes, you must also specify the alert threshold and alert contacts. For more information, see Configure monitoring and alerting.

7. In the lower part of the page, click Next: Save Task Settings and Precheck.

   You can move the pointer over Next: Save Task Settings and Precheck and click Preview OpenAPI parameters to view the parameters to be specified when you call the relevant API operation to configure the DTS task.

   Note

   • Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.

   • If the task fails to pass the precheck, click View Details next to each failed item. After you troubleshoot the issues based on the error message, you can run a precheck again.

   • If an alert is triggered for an item during the precheck:

     • If the alert item cannot be ignored, click View Details next to the failed item and troubleshoot the issues. Then, run a precheck again.

     • If the alert item can be ignored, click Confirm Alert Details. In the View Details dialog box, click Ignore. In the message that appears, click OK. Then, click Precheck Again to run a precheck again. If you ignore the alert item, data inconsistency may occur and your business may be exposed to potential risks.

8. Wait until the success rate becomes 100%. Then, click Next: Purchase Instance.

9. On the Purchase Instance page, configure the Instance Class parameter for the data migration instance. The following table describes the parameters.

   Section	Parameter	Description
   New Instance Class	Resource Group	The resource group to which the data migration instance belongs. Default value: default resource group. For more information, see What is Resource Management?
   	Instance Class	DTS provides instance classes that vary in the migration speed. You can select an instance class based on your business scenario. For more information, see Specifications of data migration instances.

10. Read and agree to Data Transmission Service (Pay-as-you-go) Service Terms by selecting the check box.

11. Click Buy and Start to start the data migration task. You can view the progress of the task in the task list.