Error codes
|
HTTP status code |
Error code |
Error message |
Description |
Action |
| 400 | AssociationExist.TrafficQos | The traffic qos with the specified attachment already exists. | The error message returned because the specified attachment is already associated with a QoS policy. | diagnosis |
| 400 | AssociationExist.TransitQosQueueExist | The qos queue with the specified TrafficQosPolicyId exists. | The error message returned because the QoS policy contains queues. You must delete the queues before you delete the QoS policy. | diagnosis |
| 400 | AssociationExist.TransitQosRuleExist | The rule with the specified TrafficMarkingPolicy already exists. | The error message returned because the traffic marking policy contains rules. You must delete the rules before you delete the traffic marking policy. | diagnosis |
| 400 | AssociationExist.TransitRouterTable | The specified association already exists. | The error message returned because the specified route table is already associated with an associated forwarding correlation. | diagnosis |
| 400 | AssociationExist.VSwitchIds | The association already exists. | The error message returned because the specified resource is already associated with the vSwitch. | diagnosis |
| 400 | AttrMismatching.CidrAddressFamily | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match AddressFamily. | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match AddressFamily. | diagnosis |
| 400 | AttrMismatching.CidrProtocol | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match Protocol. | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match Protocol. | diagnosis |
| 400 | AttrMismatching.SrcCidrDstCidr | Attribute SrcCidr of TrafficMarkRule does not match DstCidr. | Attribute SrcCidr of TrafficMarkRule does not match DstCidr. | diagnosis |
| 404 | Bid.NotFound | Not found Bid by specified AliUid. | The error message returned because the BID does not exist. | diagnosis |
| 404 | Bid.NotFound | Not found childInstance Bid by specified AliUid. | The error message returned because the BID does not exist. | diagnosis |
| 400 | BothEmpty.TagsAndResources | Both of Tags and ResourceIds is empty. | The error message returned because the Tags and ResourceIds parameters are not set. | diagnosis |
| 409 | Cloud service routes exist. | Operation is invalid because custom region-domain route entry exist | The error message returned because a cloud service route exists. | diagnosis |
| 400 | CloudRoute.Conflict | The Specified Cloud Route Conflicts. | The error message returned because the routes of the cloud services conflict with each other. | diagnosis |
| 400 | CloudRoute.Exist | The Specified Cloud Route already Exists | The error message returned because the cloud service route already exists. | diagnosis |
| 400 | CloudRoute.VpcNotAttached | The Specified Vpc instance is not attached to CEN. | The error message returned because the specified VPC is not associated with a CEN instance. | diagnosis |
| 400 | CloudRoute.VpcNotAttached | The specified Vpc instance has not been attached to CEN. | The VPC is not attached to a CEN instance. | diagnosis |
| DB.Error | db error | The error message returned because an error occurred in the database. | diagnosis | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The error message returned because the dry run request passed the precheck. | diagnosis |
| 400 | Duplicated.AddTrafficMatchRules | The parameter AddTrafficMatchRules are duplicated. | The error message returned because the AddTrafficMatchRules parameter specifies duplicate routes. | diagnosis |
| 400 | Duplicated.AddTrafficMatchRulesAndDeleteTrafficMatchRules | The same rule in AddTrafficMatchRules and DeleteTrafficMatchRules is not supported.. | The error message returned because the AddTrafficMatchRules and DeleteTrafficMatchRules cannot specify the same route. Delete duplicate routes and try again. | diagnosis |
| 400 | Duplicated.DeleteTrafficMatchRulese | The parameter DeleteTrafficMatchRules are duplicated. | The error message returned because the DeleteTrafficMatchRules parameter specifies duplicate routes. | diagnosis |
| 400 | Duplicated.Dscps | The parameter Dscps are duplicated. | The error message returned because the descriptions are duplicate. | diagnosis |
| 400 | Duplicated.MarkingDscp | The parameter MarkingDscp is duplicated. | The error message returned because the MarkingDscp parameter specifies duplicate descriptions. | diagnosis |
| 400 | Duplicated.Priority | The parameter Priority is duplicated. | The error message returned because duplicate priorities are specified. | diagnosis |
| 400 | Duplicated.TrafficMatchRules | The parameter TrafficMatchRules are duplicated. | The error message returned because the traffic match rules (TrafficMatchRules) are duplicate. | diagnosis |
| 400 | Duplicated.TrafficMatchRules | The parameter AddTrafficMatchRules are duplicated. | diagnosis | |
| 400 | Duplicated.ZoneMapping | The parameter ZoneMapping is duplicated. | The error message returned because the zone mapping contains duplicate routes. | diagnosis |
| 400 | DuplicatedParam.TagKey | The parameter TagKey is duplicated. | The error message returned because the TagKey parameter already exists. | diagnosis |
| 400 | EntityNotExist.Account | The role not exists: AliyunServiceRoleForCEN. | The error message returned because AliyunServiceRoleForCEN does not exist. | diagnosis |
| 400 | FilterKeyDuplicated.RouteFilter | The keys in RouteFilter are duplicated. | The error message returned because RouteFilter contains duplicate key values. | diagnosis |
| 400 | Flowlog.AlreayExist | This attachment already has existed flowlog instance. | The error message returned because the specified flow log already exists. You cannot create duplicate flow logs. | diagnosis |
| 400 | Forbbiden.AttachAcrossBidEcr | Attach cross bid ECR is unsupported. Please submit a ticket. | Attach cross bid ECR is unsupported. Please submit a ticket. | diagnosis |
| 400 | Forbbiden.AttachChildInstanceAcrossBid | VPCs that belong to another BID cannot be associated. You need to apply for cross-BID attaching. | The error message returned because you cannot associate with VPCs that belong to another BID. | diagnosis |
| 400 | Forbbiden.CloudBoxVSwitchExist | The operation is not allowed because of cloud box vswitch existed. | The error message returned because the specified vSwitch is associated with a CloudBox. You cannot associate with the vSwitch. | diagnosis |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | The error message returned because the RAM user does not have the required permissions. | diagnosis |
| 400 | Forbbiden.TransitRouterServiceNotOpen | The user has not open transit router service. | The error message returned because the transit router is disabled. Enable the transit router and try again. | diagnosis |
| 400 | Forbidden.AssociatedUnsupportedInterRegionTrafficQosPolicy | The transit router associated with the bandwidth plan has an inter-region traffic scheduling policy that allocates bandwidth based on absolute values. You must delete this policy before you can change the configurations. | The transit router associated with the bandwidth plan has an inter-region traffic scheduling policy that allocates bandwidth based on absolute values. You must delete this policy before you can change the configurations. | diagnosis |
| 403 | Forbidden.AttachChildInstance | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | diagnosis |
| 403 | Forbidden.CcnPublicNetworkOptimizationExist | Please disable CCN public network optimization and try again. | Please disable CCN public network optimization and try again. | diagnosis |
| 400 | Forbidden.CDTServiceExpired | The CDT service is out of service. | The cloud data transfer service has been suspended due for payment. Please renew the service and try again. | diagnosis |
| 400 | Forbidden.CenOwnerTransitRouterServiceExpired | The transit router service of the account to which the cen belongs has been suspended due to arrears. Please notify the other party to renew the service and try again. | The transit router service of the account to which the cen belongs has been suspended. Please notify the other party to renew the service and try again. | diagnosis |
| 400 | Forbidden.CenOwnerTransitRouterServiceNotOpen | The cen owner user has not opened transit router service. | The transit router service for the cen owner's account is not currently opened. Please inform them to open the transit router service and then try again. | diagnosis |
| 400 | Forbidden.CenRouteMapExist | The specified CEN route map ID already exists. | The specified CEN route map ID already exists. | diagnosis |
| 400 | Forbidden.NoMedAuthorized | Med operation is unauthorized. | Unable to operate on the specified Med routing policy. | diagnosis |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | The error message returned because you cannot configure system tags. | diagnosis |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | You cannot operate shared resources. | diagnosis |
| 400 | Forbidden.PrivatezoneRouteExisted | Operation Forbidden. There is a Privatezone Route associated with the instance, please dessociate it firstly. | The error message returned because the PrivateZone route already exists. Delete the route and relevant configurations and try again. | diagnosis |
| 400 | Forbidden.PrivatezoneServiceNotAuthorize | Privatezone service not to grant authorization. | The error message returned because PrivateZone does not have the required permissions. | diagnosis |
| 403 | Forbidden.Release | Forbidden to release a PREPAY bandwidth instance within validity period. | The error message returned because you cannot release subscription bandwidth plans before they expire. | diagnosis |
| 403 | Forbidden.ResourceGroup | The operation cannot be performed on the specified ResourceGroup. | The operation cannot be performed on the specified ResourceGroup. | diagnosis |
| 400 | Forbidden.ResourceOwnerTransitRouterServiceExpired | The transit router service of the account to which the resource belongs has been suspended due to arrears. Please notify the other party to renew the service and try again. | The transit router service of the account to which the resource belongs has been suspended. Please notify the other party to renew the service and try again. | diagnosis |
| 400 | Forbidden.ResourceOwnerTransitRouterServiceNotOpen | The resource owner user has not opened transit router service. | The transit router service for the resource owner's account is not currently opened. Please inform them to open the transit router service and then try again. | diagnosis |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | The error message returned because you cannot manage the specified tag key. | diagnosis |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | The error message returned because you cannot manage the specified tag key. | diagnosis |
| 400 | Forbidden.TransitRouterServiceExpired | The transit router service is out of service. | The transit router service has been suspended due for payment. Please renew the service and try again. | diagnosis |
| 400 | Forbidden.TypeInvalid | The specified ChildInstanceType or TransitRouterType is not supported by this operation. | The error message returned because the ChildInstanceType or TransitRouterType parameter does not support this operation. | diagnosis |
| 400 | Forbidden.VbrDeviceModel | Attach VBR on some access device models are forbidden. | The error message returned because the mode of the VBR does not support this operation. | diagnosis |
| 403 | Forbidden.VbrDeviceModel | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | The error message returned because the mode of the VBR does not support this operation. | diagnosis |
| 500 | GenerateUniqueInstanceId.Failed | Generate unique instance id failed. | The error message returned because the ID failed to be generated due to errors. Try again. | diagnosis |
| 404 | GeographicRegion.NotFound | The specified geographic region is not found. | The error message returned because the specified geographic region does not exist. | diagnosis |
| 400 | IdentityRegistrationStatusNotSupport | Real name registration of enterprises required. | Real name registration of enterprises required. | diagnosis |
| 400 | Illegal.Description | Description is illegal. | The error message returned because the description is invalid. | diagnosis |
| 400 | Illegal.Name | Name is illegal. | The error message returned because the name is invalid. | diagnosis |
| 400 | Illegal.SourceIpOrTargetIp | The specified source IP address or destination IP address is invalid. | The error message returned because the specified source or destination IP address is invalid. | diagnosis |
| 400 | Illegal.SourceIpOrTargetIp | Parameter SourceIp or TargetIp illegal | The error message returned because the SourceIp or TargetIp parameter is set to an invalid value. | diagnosis |
| 400 | Illegal.TrType | The TransitRouter type is illegal. | The error message returned because the specified type of transit router does not support this operation. | diagnosis |
| 400 | IllegalParam.AddOrRemoveZoneMappings | The specified AddZoneMappings or RemoveZoneMappings are illegal. | The error message returned because the AddZoneMappings or RemoveZoneMappings parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.AddressFamily | AddressFamily is illegal. | The AddressFamily value of the request parameter is invalid. Valid values are IPv4 or IPv6. | diagnosis |
| 400 | IllegalParam.AggregationRouteCidr | The aggregation route cidr is illegal. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.AssociateRouteTableId | The specified AssociateRouteTableId is illegal. | The error message returned because the specified route table ID (AssociateRouteTableId) is invalid. | diagnosis |
| 400 | IllegalParam.AttachmentBandwidthExceed | The entered bandwidth causes the total QoS guaranteed bandwidth to exceed the cross-region bandwidth allocation value. | The entered bandwidth causes the total QoS guaranteed bandwidth to exceed the cross-region bandwidth allocation value. | diagnosis |
| 400 | IllegalParam.AttachmentId | The specified AttachmentId is illegal. | The error message returned because the specified attachment ID is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | Bandwidth is illegal | The error message returned because the specified bandwidth value is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | Bandwidth is illegal. | The error message returned because the specified bandwidth plan ID is invalid. | diagnosis |
| 400 | IllegalParam.BandwidthGuaranteeMode | The input bandwidth guarantee type is not valid. | The input bandwidth guarantee type is not valid. | diagnosis |
| 400 | IllegalParam.BandwidthGuaranteeModeMismatch | The BandwidthGuaranteeMode does not match the Bandwidth or RemainBandwidthPercent. | The BandwidthGuaranteeMode does not match the Bandwidth or RemainBandwidthPercent. | diagnosis |
| 400 | IllegalParam.BandwidthLessThanQosPolicyBandwidth | The input bandwidth value is less than the sum of the Qos policy bandwidth. | The input bandwidth value is less than the sum of the Qos policy bandwidth. | diagnosis |
| 400 | IllegalParam.BandwidthPackageStatus | The status of the bandwidth package is incorrect. | The status of the bandwidth package is incorrect. | diagnosis |
| 400 | IllegalParam.BandwidthType | BandwidthType is illegal. | The error message returned because the specified bandwidth plan type is invalid. | diagnosis |
| 400 | IllegalParam.CenBandwidthPackageId | Parameter CenBandwidthPackageId is illegal. | The error message returned because the specified bandwidth plan ID (CenBandwidthPackageId) is invalid. | diagnosis |
| 400 | IllegalParam.CenId | The specified CenId is invalid. | The error message returned because the ID of the CEN instance is invalid. | diagnosis |
| 400 | IllegalParam.CenId | The specified CenId is illegal. | The error message returned because the specified CEN instance ID is invalid. | diagnosis |
| 400 | IllegalParam.CenIdOrRegionId | The specified CenId or RegionId is invalid. | The error message returned because the specified CEN instance ID or region ID is invalid. | diagnosis |
| 400 | IllegalParam.ChargeType | The specified ChargeType is illegal. | The error message returned because the specified billing method is invalid. | diagnosis |
| 400 | IllegalParam.Cidr | The specified cidr is invalid. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.Cidr | Cidr is illegal. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.DstCidr | DstCidr is illegal. | The error message returned because the specified destination CIDR block (DstCidr) is invalid. | diagnosis |
| 400 | IllegalParam.DstCidr | The specified DstCidr is invalid. | The error message returned because the specified destination CIDR block (DstCidr) is invalid. | diagnosis |
| 400 | IllegalParam.DstPortRange | The specified DstPortRange is illegal. | The specified DstPortRange is illegal. | diagnosis |
| 400 | IllegalParam.EffectiveBandwidthFilter | The input bandwidth filter value is not valid. | The input bandwidth filter value is not valid. | diagnosis |
| 400 | IllegalParam.GatewayZoneId | The GatewayZoneId specified in the parameter is illegal. | The GatewayZoneId specified in the parameter is illegal. | diagnosis |
| 400 | IllegalParam.GroupIpAddress | The specified GroupIpAddress is illegal. | The error message returned because the GroupIpAddress parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.Igmpv2Support | The specified Igmpv2Support is illegal. Valid values are [enable, disable]. | The parameter Igmpv2Support is invalid. Value range: enable, disable. | diagnosis |
| 400 | IllegalParam.Ipv6Support | Ipv6Support is illegal. Valid Values are [enable, disable]. | The Ipv6Support value of the request parameter is invalid. The valid value is enable or disable. | diagnosis |
| 400 | IllegalParam.LocalIp | The specified LocalIp is invalid. | The error message returned because the LocalIp parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.LongestPrefixMatchCidr | LongestPrefixMatchCidr is invalid. | The error message returned because LongestPrefixMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.MarkingDscp | MarkingDscp is illegal. | The error message returned because the MarkingDscp parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.MatchDscp | MarkingDscp is invalid. | MarkingDscp parameter is illegal. | diagnosis |
| 400 | IllegalParam.MaxResults | The parameter MaxResults is invalid. | diagnosis | |
| 400 | IllegalParam.MaxResults | The specified MaxResults is invalid. | diagnosis | |
| 400 | IllegalParam.MaxResults | The specified MaxResults is illegal. | MaxResults illegal. | diagnosis |
| 400 | IllegalParam.MinimumTransitRouterCapacity.DataProcessGBytes | The parameter DataProcessGBytes is illegal. | The parameter DataProcessGBytes is illegal. | diagnosis |
| 400 | IllegalParam.NetworkType | NetworkType is invalid. | diagnosis | |
| 400 | IllegalParam.NextHopType | The NextHopType is illegal. | The error message returned because the NextHopType parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | NextToken is invalid. | The error message returned because the NextToken parameter is set to an invalid parameter. | diagnosis |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | The parameter NextToken is invalid. | The error message returned because the NextToken parameter is set to an invalid value. Check the value and try again. | diagnosis |
| 400 | IllegalParam.NextToken | NextToken is illegal | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | NextToken is illegal. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | The nextToken is illegal. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | The specified NextToken is illegal. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.PageNumber | The specified PageNumber is illegal. | The request parameter PageNumber is invalid. The value must be greater than 0. | diagnosis |
| 400 | IllegalParam.PageSize | The specified PageSize is illegal. | Invalid request parameter PageSize. Value range is [1, 50]. | diagnosis |
| 400 | IllegalParam.PeerIp | The PeerIp in the parameter is invalid. | The PeerIp parameter in the parameter is invalid. | diagnosis |
| 400 | IllegalParam.PeerRegionId | PeerRegionId is illegal. | The error message returned because the specified peer region ID (PeerRegionId) is invalid. | diagnosis |
| 400 | IllegalParam.PeerTransitRouterId | PeerTransitRouterId is illegal. | The error message returned because the ID of the peer transit router is invalid. | diagnosis |
| 400 | IllegalParam.PeerTrMulticastDomainId | The specified PeerTrMulticastDomainId is illegal. | The error message returned because the PeerTrMulticastDomainId parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.PrefixExactMatchCidr | PrefixExactMatchCidr is invalid. | The error message returned because PrefixExactMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.Priority | Priority is illegal. | The error message returned because the specified priority is invalid. | diagnosis |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | The error message returned because the specified protocol is invalid. | diagnosis |
| 400 | IllegalParam.Protocol | Protocol is illegal. | The error message returned because the specified protocol is invalid. | diagnosis |
| 400 | IllegalParam.Region | The specified Region is invalid. | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | RegionId is illegal. | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | The Specified Parameter RegionId is illegal | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | The specified RegionId is illegal. | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | The Specified Parameter RegionId is illegal. | The region specified in the parameter is invalid. | diagnosis |
| 400 | IllegalParam.RegionIdOrTransitRouterId | The specified RegionId Or TransitRouterId is invalid. | The error message returned because the specified region ID (RegionId) or transit router ID (TransitRouterId) is invalid. | diagnosis |
| 400 | IllegalParam.RegionIdOrTransitRouterId | The specified TransitRouterId or RegionId is invalid. | The error message returned because the specified transit router ID or region is invalid. | diagnosis |
| 400 | IllegalParam.RemainBandwidthPercent | The specified RemainBandwidthPercent is invalid. | The error message returned because the RemainBandwidthPercent parameter is set to invalid value. | diagnosis |
| 400 | IllegalParam.ResourceGroupId | ResourceGroupId is illegal. | The error message returned because the specified resource group is invalid. | diagnosis |
| 400 | IllegalParam.ResourceId | ResourceId is illegal. | The error message returned because the specified resource ID (ResourceId) is invalid. | diagnosis |
| 400 | IllegalParam.ResourceType | ResourceType is invalid. | diagnosis | |
| 400 | IllegalParam.RouteTableId | The specified Route Table ID is invalid. | The routing table ID is invalid. | diagnosis |
| 400 | IllegalParam.ServiceMode | ServiceMode is illegal. | The error message returned because the specified service mode is invalid. | diagnosis |
| 400 | IllegalParam.ServiceMode | The specified ServiceMode is invalid. | The error message returned because the specified service mode is invalid. | diagnosis |
| 400 | IllegalParam.SrcCidr | The specified SrcCidr is invalid. | The error message returned because the specified source CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.SrcCidr | SrcCidr is illegal. | The error message returned because the specified source CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.SrcPortRange | The specified SrcPortRange is illegal. | diagnosis | |
| 400 | IllegalParam.SubnetOfMatchCidr | SubnetOfMatchCidr is invalid. | The error message returned because SubnetOfMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.SupernetOfMatchCidr | SupernetOfMatchCidr is invalid. | The error message returned because SupernetOfMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.SupportMulticast | Basic Transit router is not support multicast. | The error message returned because Basic Edition transit routers do not support multicast. | diagnosis |
| 400 | IllegalParam.TagKey | The tag keys are not valid. | The error message returned because the specified tag key is invalid. | diagnosis |
| 400 | IllegalParam.TagValue | The tag values are not valid. | The error message returned because the specified tag value is invalid. | diagnosis |
| 400 | IllegalParam.TextMatchCidr | The TextMatchCidr specified in the parameter is illegal. | The TextMatchCidr specified in the parameter is illegal. | diagnosis |
| 400 | IllegalParam.TrafficMarkingRuleIds | The specified TrafficMarkingRuleIds is invalid. | The error message returned because the TrafficMarkingRuleIds parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrafficMatchRuleDescription | TrafficMatchRuleDescription is illegal. | TrafficMatchRuleDescription is illegal. | diagnosis |
| 400 | IllegalParam.TrafficMatchRuleName | TrafficMatchRuleName is illegal. | TrafficMatchRuleName is illegal. | diagnosis |
| 400 | IllegalParam.TransitRegionMappings | The parameter TransitRegionMappings is illegal. | The parameter TransitRegionMappings is illegal. | diagnosis |
| 400 | IllegalParam.TransitRouterAttachmentId | TransitRouterAttachmentId is illegal. | The error message returned because the specified transit router is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterAttachments | TransitRouterAttachments is illegal. | The parameter TransitRouterAttachments is illegal. | diagnosis |
| 400 | IllegalParam.TransitRouterDestinationCidrBlock | TransitRouterDestinationCidrBlock is illegal. | The error message returned because the specified destination CIDR block for the transit router (TransitRouterDestinationCidrBlock) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterId | The specified TransitRouterId is invalid. | The error message returned because the specified transit router ID is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterId | The specified TransitRouterId is illegal. | The error message returned because the specified transit router ID is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterId | The parameter TransitRouterId or RegionId is invalid. | diagnosis | |
| 400 | IllegalParam.TransitRouterMulticastDomainId | The specified TransitRouterMulticastDomainId is illegal. | The error message returned because the specified multicast domain ID specified for the transit router (TransitRouterMulticastDomainId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRegionId | TransitRouterRegionId is illegal. | The error message returned because the specified transit router region ID (TransitRouterRegionId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryId | TransitRouterRouteEntryId is not found. | The error message returned because the route ID of the transit router (TransitRouterRouteEntryId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopAttachmentId | TransitRouterRouteEntryNextHopAttachmentId is invalid. | The error message returned because TransitRouterRouteEntryNextHopAttachmentId is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopResourceId | TransitRouterRouteEntryNextHopResourceId is invalid. | The error message returned because TransitRouterRouteEntryNextHopResourceId is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopResourceType | TransitRouterRouteEntryNextHopResourceType is invalid. | The error message returned because TransitRouterRouteEntryNextHopResourceType is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopType | TransitRouterRouteEntryNextHopType is invalid. | The error message returned because the TransitRouterRouteEntryNextHopType parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryOriginResourceId | TransitRouterRouteEntryOriginResourceId is invalid. | The error message returned because TransitRouterRouteEntryOriginResourceId is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryOriginResourceType | TransitRouterRouteEntryOriginResourceType is invalid. | The error message returned because TransitRouterRouteEntryOriginResourceType is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryStatus | TransitRouterRouteEntryStatus is invalid. | The error message returned because the status of the route on the transit router is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryStatus | TransitRouterRouteEntryStatus is illegal. | The error message returned because the status of the route on the transit router (TransitRouterRouteEntryStatus) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryType | TransitRouterRouteEntryType is invalid. | The error message returned because TransitRouterRouteEntryType is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRoutEntryDestinationCidrBlock | TransitRouterRoutEntryDestinationCidrBlock is invalid. | TransitRouterRoutEntryDestinationCidrBlock is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteTableId | TransitRouterRouteTableId is invalid. | The error message returned because specified route table ID of the transit router is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteTableId | The transitRouter route table id is illegal. | The error message returned because the route table ID of the transit router (TransitRouterRouteTableId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteTableId | TransitRouterRouteTableId is illegal. | The error message returned because the route table ID of the transit router (TransitRouterRouteTableId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterTableId | The specified TransitRouterTableId is invalid. | The error message returned because the TransitRouterTableId parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterTableId | The specified Route Table ID is invalid. | The Route Table ID is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterTableType | TransitRouterTableType is illegal. | The error message returned because the route type of the specified route table does not support this operation. | diagnosis |
| 400 | IllegalParam.TransitRouterTableType | When peer attachment is associated with a custom routeTable, the Transit Router in both regions must be enterprise. | The error message returned because both the local and peer transit routers must be of Enterprise Edition when you associate the inter-region connection with a route table. | diagnosis |
| 400 | IllegalParam.TransitRouteTableAggregationCidr | Invalid TransitRouteTableAggregationCidr. | The aggregated CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouteTableAggregationScope | TransitRouteTableAggregationScope is invalid, valid value is VPC. | TransitRouteTableAggregationScope is invalid, valid value is VPC. | diagnosis |
| 400 | IllegalParam.TransportType | The specified TransportType is invalid. | The error message returned because the TransportType parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrInstance | The specified TansiteRouterId is invalid. | The error message returned because the TansiteRouterId parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrInstance | The specified TransitRouter is invalid. | The error message returned because the TransitRouter parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrInstance | The specified TrInstance is illegal. | The error message returned because the specified transit router is invalid. | diagnosis |
| 400 | IllegalParam.TrInstance | The parameter TransitRouterId or RegionId is invalid. | diagnosis | |
| 400 | IllegalParam.VSwitchId | VSwitchId is illegal. | The error message returned because the specified vSwitch ID is invalid. | diagnosis |
| 400 | IllegalParam.VSwitchIds | The parameter VSwitchIds is illegal. | The parameter VSwitchIds is illegal. | diagnosis |
| 400 | IllegalParam.ZoneId | The specified ZoneId is illegal. | The error message returned because the specified zone is invalid. | diagnosis |
| 400 | IllegalParam.ZoneMappings | The Specified Parameter ZoneMappings is illegal | The error message returned because the specified zone mappings (ZoneMappings) is invalid. | diagnosis |
| 400 | IllegalParamLength.Tag | The specified length of Tag is invalid. | The error message returned because the length of the specified tag is invalid. Check the tag and try again. | diagnosis |
| 400 | IncorrectStatus.AggregationRoute | The aggregation route is not in a valid state for the operation. | The aggregation route is not in a valid state for the operation. | diagnosis |
| 400 | IncorrectStatus.Attachment | The resource is not in a valid state for the attachment operation. | The error message returned because the operation is not allowed when the network instance is being processed. Try again later. | diagnosis |
| 400 | IncorrectStatus.Attachment | The status of Attachment is incorrect. | The error message returned because the status of the attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.AttachmentId | The status of AttachmentId is incorrect. | The error message returned because the status of the attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.AttachmentOrRouteTable | The resource is not in a valid state for the operation. | The error message returned because this operation is not supported when the specified attachment or route table is in an unstable state. Try again later. | diagnosis |
| 400 | IncorrectStatus.Cen | The status of Cen is incorrect. | The error message returned because the status of the specified CEN instance does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.CenInstance | The status of CenInstance is incorrect. | The error message returned because the status of the CEN instance to which the transit router is connected does not support this operation. Wait until the CEN instance is in a stable state. | diagnosis |
| 400 | IncorrectStatus.ConnectPeerIds | Connect Peer statuses are incorrect. | Connect Peer statuses are incorrect. | diagnosis |
| 400 | IncorrectStatus.EcrResource | The ECR resource is not in a valid state for the attachment operation. | The ECR resource is not in a valid state for the attachment operation. | diagnosis |
| 400 | IncorrectStatus.flowlog | This action is not allowed in the current flow log status. | This action is not allowed in the current flow log status. | diagnosis |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | The error message returned because the status of the flow log does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.MulticastDomain | The status of MulticastDomain is incorrect. | The error message returned because the status of the specified multicast domain does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.MulticastDomainId | The status of MulticastDomainId is incorrect. | The error message returned because the status of the specified multicast domain does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.MulticastGroup | The status of MulticastGroup is incorrect. | The error message returned because the status of the specified multicast group does not support this operation. Try again later. | diagnosis |
| 400 | AssociationExist.TrafficQos | The traffic qos with the specified attachment already exists. | The error message returned because the specified attachment is already associated with a QoS policy. | diagnosis |
| 400 | AssociationExist.TransitQosQueueExist | The qos queue with the specified TrafficQosPolicyId exists. | The error message returned because the QoS policy contains queues. You must delete the queues before you delete the QoS policy. | diagnosis |
| 400 | AssociationExist.TransitQosRuleExist | The rule with the specified TrafficMarkingPolicy already exists. | The error message returned because the traffic marking policy contains rules. You must delete the rules before you delete the traffic marking policy. | diagnosis |
| 400 | AssociationExist.TransitRouterTable | The specified association already exists. | The error message returned because the specified route table is already associated with an associated forwarding correlation. | diagnosis |
| 400 | AssociationExist.VSwitchIds | The association already exists. | The error message returned because the specified resource is already associated with the vSwitch. | diagnosis |
| 400 | AttrMismatching.CidrAddressFamily | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match AddressFamily. | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match AddressFamily. | diagnosis |
| 400 | AttrMismatching.CidrProtocol | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match Protocol. | Attribute SrcCidr or DstCidr of TrafficMarkRule does not match Protocol. | diagnosis |
| 400 | AttrMismatching.SrcCidrDstCidr | Attribute SrcCidr of TrafficMarkRule does not match DstCidr. | Attribute SrcCidr of TrafficMarkRule does not match DstCidr. | diagnosis |
| 404 | Bid.NotFound | Not found Bid by specified AliUid. | The error message returned because the BID does not exist. | diagnosis |
| 404 | Bid.NotFound | Not found childInstance Bid by specified AliUid. | The error message returned because the BID does not exist. | diagnosis |
| 400 | BothEmpty.TagsAndResources | Both of Tags and ResourceIds is empty. | The error message returned because the Tags and ResourceIds parameters are not set. | diagnosis |
| 409 | Cloud service routes exist. | Operation is invalid because custom region-domain route entry exist | The error message returned because a cloud service route exists. | diagnosis |
| 400 | CloudRoute.Conflict | The Specified Cloud Route Conflicts. | The error message returned because the routes of the cloud services conflict with each other. | diagnosis |
| 400 | CloudRoute.Exist | The Specified Cloud Route already Exists | The error message returned because the cloud service route already exists. | diagnosis |
| 400 | CloudRoute.VpcNotAttached | The Specified Vpc instance is not attached to CEN. | The error message returned because the specified VPC is not associated with a CEN instance. | diagnosis |
| 400 | CloudRoute.VpcNotAttached | The specified Vpc instance has not been attached to CEN. | The VPC is not attached to a CEN instance. | diagnosis |
| DB.Error | db error | The error message returned because an error occurred in the database. | diagnosis | |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | The error message returned because the dry run request passed the precheck. | diagnosis |
| 400 | Duplicated.AddTrafficMatchRules | The parameter AddTrafficMatchRules are duplicated. | The error message returned because the AddTrafficMatchRules parameter specifies duplicate routes. | diagnosis |
| 400 | Duplicated.AddTrafficMatchRulesAndDeleteTrafficMatchRules | The same rule in AddTrafficMatchRules and DeleteTrafficMatchRules is not supported.. | The error message returned because the AddTrafficMatchRules and DeleteTrafficMatchRules cannot specify the same route. Delete duplicate routes and try again. | diagnosis |
| 400 | Duplicated.DeleteTrafficMatchRulese | The parameter DeleteTrafficMatchRules are duplicated. | The error message returned because the DeleteTrafficMatchRules parameter specifies duplicate routes. | diagnosis |
| 400 | Duplicated.Dscps | The parameter Dscps are duplicated. | The error message returned because the descriptions are duplicate. | diagnosis |
| 400 | Duplicated.MarkingDscp | The parameter MarkingDscp is duplicated. | The error message returned because the MarkingDscp parameter specifies duplicate descriptions. | diagnosis |
| 400 | Duplicated.Priority | The parameter Priority is duplicated. | The error message returned because duplicate priorities are specified. | diagnosis |
| 400 | Duplicated.TrafficMatchRules | The parameter TrafficMatchRules are duplicated. | The error message returned because the traffic match rules (TrafficMatchRules) are duplicate. | diagnosis |
| 400 | Duplicated.TrafficMatchRules | The parameter AddTrafficMatchRules are duplicated. | diagnosis | |
| 400 | Duplicated.ZoneMapping | The parameter ZoneMapping is duplicated. | The error message returned because the zone mapping contains duplicate routes. | diagnosis |
| 400 | DuplicatedParam.TagKey | The parameter TagKey is duplicated. | The error message returned because the TagKey parameter already exists. | diagnosis |
| 400 | EntityNotExist.Account | The role not exists: AliyunServiceRoleForCEN. | The error message returned because AliyunServiceRoleForCEN does not exist. | diagnosis |
| 400 | FilterKeyDuplicated.RouteFilter | The keys in RouteFilter are duplicated. | The error message returned because RouteFilter contains duplicate key values. | diagnosis |
| 400 | Flowlog.AlreayExist | This attachment already has existed flowlog instance. | The error message returned because the specified flow log already exists. You cannot create duplicate flow logs. | diagnosis |
| 400 | Forbbiden.AttachAcrossBidEcr | Attach cross bid ECR is unsupported. Please submit a ticket. | Attach cross bid ECR is unsupported. Please submit a ticket. | diagnosis |
| 400 | Forbbiden.AttachChildInstanceAcrossBid | VPCs that belong to another BID cannot be associated. You need to apply for cross-BID attaching. | The error message returned because you cannot associate with VPCs that belong to another BID. | diagnosis |
| 400 | Forbbiden.CloudBoxVSwitchExist | The operation is not allowed because of cloud box vswitch existed. | The error message returned because the specified vSwitch is associated with a CloudBox. You cannot associate with the vSwitch. | diagnosis |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | The error message returned because the RAM user does not have the required permissions. | diagnosis |
| 400 | Forbbiden.TransitRouterServiceNotOpen | The user has not open transit router service. | The error message returned because the transit router is disabled. Enable the transit router and try again. | diagnosis |
| 400 | Forbidden.AssociatedUnsupportedInterRegionTrafficQosPolicy | The transit router associated with the bandwidth plan has an inter-region traffic scheduling policy that allocates bandwidth based on absolute values. You must delete this policy before you can change the configurations. | The transit router associated with the bandwidth plan has an inter-region traffic scheduling policy that allocates bandwidth based on absolute values. You must delete this policy before you can change the configurations. | diagnosis |
| 403 | Forbidden.AttachChildInstance | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | diagnosis |
| 403 | Forbidden.CcnPublicNetworkOptimizationExist | Please disable CCN public network optimization and try again. | Please disable CCN public network optimization and try again. | diagnosis |
| 400 | Forbidden.CDTServiceExpired | The CDT service is out of service. | The cloud data transfer service has been suspended due for payment. Please renew the service and try again. | diagnosis |
| 400 | Forbidden.CenOwnerTransitRouterServiceExpired | The transit router service of the account to which the cen belongs has been suspended due to arrears. Please notify the other party to renew the service and try again. | The transit router service of the account to which the cen belongs has been suspended. Please notify the other party to renew the service and try again. | diagnosis |
| 400 | Forbidden.CenOwnerTransitRouterServiceNotOpen | The cen owner user has not opened transit router service. | The transit router service for the cen owner's account is not currently opened. Please inform them to open the transit router service and then try again. | diagnosis |
| 400 | Forbidden.CenRouteMapExist | The specified CEN route map ID already exists. | The specified CEN route map ID already exists. | diagnosis |
| 400 | Forbidden.NoMedAuthorized | Med operation is unauthorized. | Unable to operate on the specified Med routing policy. | diagnosis |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | The error message returned because you cannot configure system tags. | diagnosis |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | You cannot operate shared resources. | diagnosis |
| 400 | Forbidden.PrivatezoneRouteExisted | Operation Forbidden. There is a Privatezone Route associated with the instance, please dessociate it firstly. | The error message returned because the PrivateZone route already exists. Delete the route and relevant configurations and try again. | diagnosis |
| 400 | Forbidden.PrivatezoneServiceNotAuthorize | Privatezone service not to grant authorization. | The error message returned because PrivateZone does not have the required permissions. | diagnosis |
| 403 | Forbidden.Release | Forbidden to release a PREPAY bandwidth instance within validity period. | The error message returned because you cannot release subscription bandwidth plans before they expire. | diagnosis |
| 403 | Forbidden.ResourceGroup | The operation cannot be performed on the specified ResourceGroup. | The operation cannot be performed on the specified ResourceGroup. | diagnosis |
| 400 | Forbidden.ResourceOwnerTransitRouterServiceExpired | The transit router service of the account to which the resource belongs has been suspended due to arrears. Please notify the other party to renew the service and try again. | The transit router service of the account to which the resource belongs has been suspended. Please notify the other party to renew the service and try again. | diagnosis |
| 400 | Forbidden.ResourceOwnerTransitRouterServiceNotOpen | The resource owner user has not opened transit router service. | The transit router service for the resource owner's account is not currently opened. Please inform them to open the transit router service and then try again. | diagnosis |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | The error message returned because you cannot manage the specified tag key. | diagnosis |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | The error message returned because you cannot manage the specified tag key. | diagnosis |
| 400 | Forbidden.TransitRouterServiceExpired | The transit router service is out of service. | The transit router service has been suspended due for payment. Please renew the service and try again. | diagnosis |
| 400 | Forbidden.TypeInvalid | The specified ChildInstanceType or TransitRouterType is not supported by this operation. | The error message returned because the ChildInstanceType or TransitRouterType parameter does not support this operation. | diagnosis |
| 400 | Forbidden.VbrDeviceModel | Attach VBR on some access device models are forbidden. | The error message returned because the mode of the VBR does not support this operation. | diagnosis |
| 403 | Forbidden.VbrDeviceModel | The attached VBR on some access device models are not supported. Please submit a ticket to continue using this VBR on CEN. | The error message returned because the mode of the VBR does not support this operation. | diagnosis |
| 500 | GenerateUniqueInstanceId.Failed | Generate unique instance id failed. | The error message returned because the ID failed to be generated due to errors. Try again. | diagnosis |
| 404 | GeographicRegion.NotFound | The specified geographic region is not found. | The error message returned because the specified geographic region does not exist. | diagnosis |
| 400 | IdentityRegistrationStatusNotSupport | Real name registration of enterprises required. | Real name registration of enterprises required. | diagnosis |
| 400 | Illegal.Description | Description is illegal. | The error message returned because the description is invalid. | diagnosis |
| 400 | Illegal.Name | Name is illegal. | The error message returned because the name is invalid. | diagnosis |
| 400 | Illegal.SourceIpOrTargetIp | The specified source IP address or destination IP address is invalid. | The error message returned because the specified source or destination IP address is invalid. | diagnosis |
| 400 | Illegal.SourceIpOrTargetIp | Parameter SourceIp or TargetIp illegal | The error message returned because the SourceIp or TargetIp parameter is set to an invalid value. | diagnosis |
| 400 | Illegal.TrType | The TransitRouter type is illegal. | The error message returned because the specified type of transit router does not support this operation. | diagnosis |
| 400 | IllegalParam.AddOrRemoveZoneMappings | The specified AddZoneMappings or RemoveZoneMappings are illegal. | The error message returned because the AddZoneMappings or RemoveZoneMappings parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.AddressFamily | AddressFamily is illegal. | The AddressFamily value of the request parameter is invalid. Valid values are IPv4 or IPv6. | diagnosis |
| 400 | IllegalParam.AggregationRouteCidr | The aggregation route cidr is illegal. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.AssociateRouteTableId | The specified AssociateRouteTableId is illegal. | The error message returned because the specified route table ID (AssociateRouteTableId) is invalid. | diagnosis |
| 400 | IllegalParam.AttachmentBandwidthExceed | The entered bandwidth causes the total QoS guaranteed bandwidth to exceed the cross-region bandwidth allocation value. | The entered bandwidth causes the total QoS guaranteed bandwidth to exceed the cross-region bandwidth allocation value. | diagnosis |
| 400 | IllegalParam.AttachmentId | The specified AttachmentId is illegal. | The error message returned because the specified attachment ID is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | Bandwidth is illegal | The error message returned because the specified bandwidth value is invalid. | diagnosis |
| 400 | IllegalParam.Bandwidth | Bandwidth is illegal. | The error message returned because the specified bandwidth plan ID is invalid. | diagnosis |
| 400 | IllegalParam.BandwidthGuaranteeMode | The input bandwidth guarantee type is not valid. | The input bandwidth guarantee type is not valid. | diagnosis |
| 400 | IllegalParam.BandwidthGuaranteeModeMismatch | The BandwidthGuaranteeMode does not match the Bandwidth or RemainBandwidthPercent. | The BandwidthGuaranteeMode does not match the Bandwidth or RemainBandwidthPercent. | diagnosis |
| 400 | IllegalParam.BandwidthLessThanQosPolicyBandwidth | The input bandwidth value is less than the sum of the Qos policy bandwidth. | The input bandwidth value is less than the sum of the Qos policy bandwidth. | diagnosis |
| 400 | IllegalParam.BandwidthPackageStatus | The status of the bandwidth package is incorrect. | The status of the bandwidth package is incorrect. | diagnosis |
| 400 | IllegalParam.BandwidthType | BandwidthType is illegal. | The error message returned because the specified bandwidth plan type is invalid. | diagnosis |
| 400 | IllegalParam.CenBandwidthPackageId | Parameter CenBandwidthPackageId is illegal. | The error message returned because the specified bandwidth plan ID (CenBandwidthPackageId) is invalid. | diagnosis |
| 400 | IllegalParam.CenId | The specified CenId is invalid. | The error message returned because the ID of the CEN instance is invalid. | diagnosis |
| 400 | IllegalParam.CenId | The specified CenId is illegal. | The error message returned because the specified CEN instance ID is invalid. | diagnosis |
| 400 | IllegalParam.CenIdOrRegionId | The specified CenId or RegionId is invalid. | The error message returned because the specified CEN instance ID or region ID is invalid. | diagnosis |
| 400 | IllegalParam.ChargeType | The specified ChargeType is illegal. | The error message returned because the specified billing method is invalid. | diagnosis |
| 400 | IllegalParam.Cidr | The specified cidr is invalid. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.Cidr | Cidr is illegal. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.DstCidr | DstCidr is illegal. | The error message returned because the specified destination CIDR block (DstCidr) is invalid. | diagnosis |
| 400 | IllegalParam.DstCidr | The specified DstCidr is invalid. | The error message returned because the specified destination CIDR block (DstCidr) is invalid. | diagnosis |
| 400 | IllegalParam.DstPortRange | The specified DstPortRange is illegal. | The specified DstPortRange is illegal. | diagnosis |
| 400 | IllegalParam.EffectiveBandwidthFilter | The input bandwidth filter value is not valid. | The input bandwidth filter value is not valid. | diagnosis |
| 400 | IllegalParam.GatewayZoneId | The GatewayZoneId specified in the parameter is illegal. | The GatewayZoneId specified in the parameter is illegal. | diagnosis |
| 400 | IllegalParam.GroupIpAddress | The specified GroupIpAddress is illegal. | The error message returned because the GroupIpAddress parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.Igmpv2Support | The specified Igmpv2Support is illegal. Valid values are [enable, disable]. | The parameter Igmpv2Support is invalid. Value range: enable, disable. | diagnosis |
| 400 | IllegalParam.Ipv6Support | Ipv6Support is illegal. Valid Values are [enable, disable]. | The Ipv6Support value of the request parameter is invalid. The valid value is enable or disable. | diagnosis |
| 400 | IllegalParam.LocalIp | The specified LocalIp is invalid. | The error message returned because the LocalIp parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.LongestPrefixMatchCidr | LongestPrefixMatchCidr is invalid. | The error message returned because LongestPrefixMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.MarkingDscp | MarkingDscp is illegal. | The error message returned because the MarkingDscp parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.MatchDscp | MarkingDscp is invalid. | MarkingDscp parameter is illegal. | diagnosis |
| 400 | IllegalParam.MaxResults | The parameter MaxResults is invalid. | diagnosis | |
| 400 | IllegalParam.MaxResults | The specified MaxResults is invalid. | diagnosis | |
| 400 | IllegalParam.MaxResults | The specified MaxResults is illegal. | MaxResults illegal. | diagnosis |
| 400 | IllegalParam.MinimumTransitRouterCapacity.DataProcessGBytes | The parameter DataProcessGBytes is illegal. | The parameter DataProcessGBytes is illegal. | diagnosis |
| 400 | IllegalParam.NetworkType | NetworkType is invalid. | diagnosis | |
| 400 | IllegalParam.NextHopType | The NextHopType is illegal. | The error message returned because the NextHopType parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | NextToken is invalid. | The error message returned because the NextToken parameter is set to an invalid parameter. | diagnosis |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | The parameter NextToken is invalid. | The error message returned because the NextToken parameter is set to an invalid value. Check the value and try again. | diagnosis |
| 400 | IllegalParam.NextToken | NextToken is illegal | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | NextToken is illegal. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | The nextToken is illegal. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.NextToken | The specified NextToken is illegal. | The error message returned because the NextToken parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.PageNumber | The specified PageNumber is illegal. | The request parameter PageNumber is invalid. The value must be greater than 0. | diagnosis |
| 400 | IllegalParam.PageSize | The specified PageSize is illegal. | Invalid request parameter PageSize. Value range is [1, 50]. | diagnosis |
| 400 | IllegalParam.PeerIp | The PeerIp in the parameter is invalid. | The PeerIp parameter in the parameter is invalid. | diagnosis |
| 400 | IllegalParam.PeerRegionId | PeerRegionId is illegal. | The error message returned because the specified peer region ID (PeerRegionId) is invalid. | diagnosis |
| 400 | IllegalParam.PeerTransitRouterId | PeerTransitRouterId is illegal. | The error message returned because the ID of the peer transit router is invalid. | diagnosis |
| 400 | IllegalParam.PeerTrMulticastDomainId | The specified PeerTrMulticastDomainId is illegal. | The error message returned because the PeerTrMulticastDomainId parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.PrefixExactMatchCidr | PrefixExactMatchCidr is invalid. | The error message returned because PrefixExactMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.Priority | Priority is illegal. | The error message returned because the specified priority is invalid. | diagnosis |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | The error message returned because the specified protocol is invalid. | diagnosis |
| 400 | IllegalParam.Protocol | Protocol is illegal. | The error message returned because the specified protocol is invalid. | diagnosis |
| 400 | IllegalParam.Region | The specified Region is invalid. | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | RegionId is illegal. | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | The Specified Parameter RegionId is illegal | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | The specified RegionId is illegal. | The error message returned because the specified region is invalid. | diagnosis |
| 400 | IllegalParam.RegionId | The Specified Parameter RegionId is illegal. | The region specified in the parameter is invalid. | diagnosis |
| 400 | IllegalParam.RegionIdOrTransitRouterId | The specified RegionId Or TransitRouterId is invalid. | The error message returned because the specified region ID (RegionId) or transit router ID (TransitRouterId) is invalid. | diagnosis |
| 400 | IllegalParam.RegionIdOrTransitRouterId | The specified TransitRouterId or RegionId is invalid. | The error message returned because the specified transit router ID or region is invalid. | diagnosis |
| 400 | IllegalParam.RemainBandwidthPercent | The specified RemainBandwidthPercent is invalid. | The error message returned because the RemainBandwidthPercent parameter is set to invalid value. | diagnosis |
| 400 | IllegalParam.ResourceGroupId | ResourceGroupId is illegal. | The error message returned because the specified resource group is invalid. | diagnosis |
| 400 | IllegalParam.ResourceId | ResourceId is illegal. | The error message returned because the specified resource ID (ResourceId) is invalid. | diagnosis |
| 400 | IllegalParam.ResourceType | ResourceType is invalid. | diagnosis | |
| 400 | IllegalParam.RouteTableId | The specified Route Table ID is invalid. | The routing table ID is invalid. | diagnosis |
| 400 | IllegalParam.ServiceMode | ServiceMode is illegal. | The error message returned because the specified service mode is invalid. | diagnosis |
| 400 | IllegalParam.ServiceMode | The specified ServiceMode is invalid. | The error message returned because the specified service mode is invalid. | diagnosis |
| 400 | IllegalParam.SrcCidr | The specified SrcCidr is invalid. | The error message returned because the specified source CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.SrcCidr | SrcCidr is illegal. | The error message returned because the specified source CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.SrcPortRange | The specified SrcPortRange is illegal. | diagnosis | |
| 400 | IllegalParam.SubnetOfMatchCidr | SubnetOfMatchCidr is invalid. | The error message returned because SubnetOfMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.SupernetOfMatchCidr | SupernetOfMatchCidr is invalid. | The error message returned because SupernetOfMatchCidr is set to an invalid value. | diagnosis |
| 400 | IllegalParam.SupportMulticast | Basic Transit router is not support multicast. | The error message returned because Basic Edition transit routers do not support multicast. | diagnosis |
| 400 | IllegalParam.TagKey | The tag keys are not valid. | The error message returned because the specified tag key is invalid. | diagnosis |
| 400 | IllegalParam.TagValue | The tag values are not valid. | The error message returned because the specified tag value is invalid. | diagnosis |
| 400 | IllegalParam.TextMatchCidr | The TextMatchCidr specified in the parameter is illegal. | The TextMatchCidr specified in the parameter is illegal. | diagnosis |
| 400 | IllegalParam.TrafficMarkingRuleIds | The specified TrafficMarkingRuleIds is invalid. | The error message returned because the TrafficMarkingRuleIds parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrafficMatchRuleDescription | TrafficMatchRuleDescription is illegal. | TrafficMatchRuleDescription is illegal. | diagnosis |
| 400 | IllegalParam.TrafficMatchRuleName | TrafficMatchRuleName is illegal. | TrafficMatchRuleName is illegal. | diagnosis |
| 400 | IllegalParam.TransitRegionMappings | The parameter TransitRegionMappings is illegal. | The parameter TransitRegionMappings is illegal. | diagnosis |
| 400 | IllegalParam.TransitRouterAttachmentId | TransitRouterAttachmentId is illegal. | The error message returned because the specified transit router is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterAttachments | TransitRouterAttachments is illegal. | The parameter TransitRouterAttachments is illegal. | diagnosis |
| 400 | IllegalParam.TransitRouterDestinationCidrBlock | TransitRouterDestinationCidrBlock is illegal. | The error message returned because the specified destination CIDR block for the transit router (TransitRouterDestinationCidrBlock) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterId | The specified TransitRouterId is invalid. | The error message returned because the specified transit router ID is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterId | The specified TransitRouterId is illegal. | The error message returned because the specified transit router ID is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterId | The parameter TransitRouterId or RegionId is invalid. | diagnosis | |
| 400 | IllegalParam.TransitRouterMulticastDomainId | The specified TransitRouterMulticastDomainId is illegal. | The error message returned because the specified multicast domain ID specified for the transit router (TransitRouterMulticastDomainId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRegionId | TransitRouterRegionId is illegal. | The error message returned because the specified transit router region ID (TransitRouterRegionId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryId | TransitRouterRouteEntryId is not found. | The error message returned because the route ID of the transit router (TransitRouterRouteEntryId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopAttachmentId | TransitRouterRouteEntryNextHopAttachmentId is invalid. | The error message returned because TransitRouterRouteEntryNextHopAttachmentId is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopResourceId | TransitRouterRouteEntryNextHopResourceId is invalid. | The error message returned because TransitRouterRouteEntryNextHopResourceId is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopResourceType | TransitRouterRouteEntryNextHopResourceType is invalid. | The error message returned because TransitRouterRouteEntryNextHopResourceType is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryNextHopType | TransitRouterRouteEntryNextHopType is invalid. | The error message returned because the TransitRouterRouteEntryNextHopType parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryOriginResourceId | TransitRouterRouteEntryOriginResourceId is invalid. | The error message returned because TransitRouterRouteEntryOriginResourceId is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryOriginResourceType | TransitRouterRouteEntryOriginResourceType is invalid. | The error message returned because TransitRouterRouteEntryOriginResourceType is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryStatus | TransitRouterRouteEntryStatus is invalid. | The error message returned because the status of the route on the transit router is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryStatus | TransitRouterRouteEntryStatus is illegal. | The error message returned because the status of the route on the transit router (TransitRouterRouteEntryStatus) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteEntryType | TransitRouterRouteEntryType is invalid. | The error message returned because TransitRouterRouteEntryType is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterRoutEntryDestinationCidrBlock | TransitRouterRoutEntryDestinationCidrBlock is invalid. | TransitRouterRoutEntryDestinationCidrBlock is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteTableId | TransitRouterRouteTableId is invalid. | The error message returned because specified route table ID of the transit router is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteTableId | The transitRouter route table id is illegal. | The error message returned because the route table ID of the transit router (TransitRouterRouteTableId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterRouteTableId | TransitRouterRouteTableId is illegal. | The error message returned because the route table ID of the transit router (TransitRouterRouteTableId) is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterTableId | The specified TransitRouterTableId is invalid. | The error message returned because the TransitRouterTableId parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TransitRouterTableId | The specified Route Table ID is invalid. | The Route Table ID is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouterTableType | TransitRouterTableType is illegal. | The error message returned because the route type of the specified route table does not support this operation. | diagnosis |
| 400 | IllegalParam.TransitRouterTableType | When peer attachment is associated with a custom routeTable, the Transit Router in both regions must be enterprise. | The error message returned because both the local and peer transit routers must be of Enterprise Edition when you associate the inter-region connection with a route table. | diagnosis |
| 400 | IllegalParam.TransitRouteTableAggregationCidr | Invalid TransitRouteTableAggregationCidr. | The aggregated CIDR block is invalid. | diagnosis |
| 400 | IllegalParam.TransitRouteTableAggregationScope | TransitRouteTableAggregationScope is invalid, valid value is VPC. | TransitRouteTableAggregationScope is invalid, valid value is VPC. | diagnosis |
| 400 | IllegalParam.TransportType | The specified TransportType is invalid. | The error message returned because the TransportType parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrInstance | The specified TansiteRouterId is invalid. | The error message returned because the TansiteRouterId parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrInstance | The specified TransitRouter is invalid. | The error message returned because the TransitRouter parameter is set to an invalid value. | diagnosis |
| 400 | IllegalParam.TrInstance | The specified TrInstance is illegal. | The error message returned because the specified transit router is invalid. | diagnosis |
| 400 | IllegalParam.TrInstance | The parameter TransitRouterId or RegionId is invalid. | diagnosis | |
| 400 | IllegalParam.VSwitchId | VSwitchId is illegal. | The error message returned because the specified vSwitch ID is invalid. | diagnosis |
| 400 | IllegalParam.VSwitchIds | The parameter VSwitchIds is illegal. | The parameter VSwitchIds is illegal. | diagnosis |
| 400 | IllegalParam.ZoneId | The specified ZoneId is illegal. | The error message returned because the specified zone is invalid. | diagnosis |
| 400 | IllegalParam.ZoneMappings | The Specified Parameter ZoneMappings is illegal | The error message returned because the specified zone mappings (ZoneMappings) is invalid. | diagnosis |
| 400 | IllegalParamLength.Tag | The specified length of Tag is invalid. | The error message returned because the length of the specified tag is invalid. Check the tag and try again. | diagnosis |
| 400 | IncorrectStatus.AggregationRoute | The aggregation route is not in a valid state for the operation. | The aggregation route is not in a valid state for the operation. | diagnosis |
| 400 | IncorrectStatus.Attachment | The resource is not in a valid state for the attachment operation. | The error message returned because the operation is not allowed when the network instance is being processed. Try again later. | diagnosis |
| 400 | IncorrectStatus.Attachment | The status of Attachment is incorrect. | The error message returned because the status of the attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.AttachmentId | The status of AttachmentId is incorrect. | The error message returned because the status of the attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.AttachmentOrRouteTable | The resource is not in a valid state for the operation. | The error message returned because this operation is not supported when the specified attachment or route table is in an unstable state. Try again later. | diagnosis |
| 400 | IncorrectStatus.Cen | The status of Cen is incorrect. | The error message returned because the status of the specified CEN instance does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.CenInstance | The status of CenInstance is incorrect. | The error message returned because the status of the CEN instance to which the transit router is connected does not support this operation. Wait until the CEN instance is in a stable state. | diagnosis |
| 400 | IncorrectStatus.ConnectPeerIds | Connect Peer statuses are incorrect. | Connect Peer statuses are incorrect. | diagnosis |
| 400 | IncorrectStatus.EcrResource | The ECR resource is not in a valid state for the attachment operation. | The ECR resource is not in a valid state for the attachment operation. | diagnosis |
| 400 | IncorrectStatus.flowlog | This action is not allowed in the current flow log status. | This action is not allowed in the current flow log status. | diagnosis |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | The error message returned because the status of the flow log does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.MulticastDomain | The status of MulticastDomain is incorrect. | The error message returned because the status of the specified multicast domain does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.MulticastDomainId | The status of MulticastDomainId is incorrect. | The error message returned because the status of the specified multicast domain does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.MulticastGroup | The status of MulticastGroup is incorrect. | The error message returned because the status of the specified multicast group does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.PeerTrMulticastDomainId | The status of PeerTrMulticastDomainId is incorrect. | The error message returned because the specified multicast domain on the peer transit router (PeerTrMulticastDomain) does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.ResourceStatus | The resource is not in a valid state for the attachment operation. | The error message returned because this operation is not supported when the specified resource is in an unstable state. Try again later. | diagnosis |
| 400 | IncorrectStatus.RouteMap | Operation Failed. The specified route map is configuring, please try again later. | The error message returned because the status of the routing policy (routeMap) does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.RouteTable | RouteTable status is invalid. | The error message returned because the operation is not supported when the specified route table is in an unstable state. | diagnosis |
| 400 | IncorrectStatus.Status | RouteTableAssociation status is invalid. | The error message returned because the status of the transit router route table or the transit router attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.Status | The TransitRouterRouteTable or TransitRouterAttachment Status is illegal. | The error message returned because the status of the transit router route table or the transit router attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TrafficMarkingPolicy | The status of TrafficMarkingPolicy is incorrect. | The error message returned because the status of the traffic marking policy does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TrafficMarkingPolicy | TrafficMarkingPolicy status is invalid. | The error message returned because the status of the traffic marking policy does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TrafficQosPolicy | The status of TrafficQosPolicy is incorrect. | The error message returned because the status of the specified QoS policy does not support the operation. | diagnosis |
| 400 | IncorrectStatus.TransitRouter | The status of TransitRouter is incorrect. | The error message returned because the status of the transit router does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouter | The status of transitRouter is invalid. | The error message returned because the status of the transit router does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouter | TransitRouter status is invalid. | The error message returned because the status of the transit router does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouter | The resource is not in a valid state for the operation. | The CEN TR instance is not in a valid state for the operation. Please try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouterAttachment | The status of TransitRouterAttachment is incorrect. | The error message returned because the status of the transit router attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouterAttachment | TransitRouterAttachmentId status is invalid. | The error message returned because the status of the transit router attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouterAttachmentId | TransitRouterAttachmentId status is invalid. | The error message returned because the status of the transit router attachment does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouterAttachmentId | The resource is not in a valid state for the attachment operation. | The error message returned because the operation is not supported when the specified attachment is in an unstable state | diagnosis |
| 400 | IncorrectStatus.TransitRouterConnectPeer | The resource is not in a valid state for the operation. | The error message returned because this operation is not supported when the connect peer is in an unstable state. | diagnosis |
| 400 | IncorrectStatus.TransitRouterInstance | The status of TransitRouter is incorrect. | The error message returned because the transit router is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.TransitRouterRouteTable | TransitRouterRouteTable status is invalid. | The error message returned because the transit router is in an invalid state. | diagnosis |
| 400 | IncorrectStatus.TransitRouteTable | The status of transitRouter route table is invalid. | The error message returned because the status of the transit router route table does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouteTable | The transitRouter route table is not in a valid state for the operation. | The error message returned because the status of the transit router route table does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.TransitRouteTableAggregationCidr | Route table aggregation cidr status is invalid. | The error message returned because the status of The aggregate route does not support the operation. Please try again later. | diagnosis |
| 400 | IncorrectStatus.TrFlowlog | Flowlog status for specified TransitRouter is invalid for this operation. | Flowlog status for specified TransitRouter is invalid for this operation. | diagnosis |
| 400 | IncorrectStatus.VbrResource | The resource is not in a valid state for the attachment operation. | The error message returned because this operation is not supported when the specified VBR is in an unstable state. Wait until all operations related to the VBR are completed. | diagnosis |
| 400 | IncorrectStatus.Vpc | The resource is not in a valid state for the attachment operation. | The error message returned because the status of the VPC does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.Vpc | The resource is not in a valid state for the operation. | The error message returned because the status of the VPC does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.VpcOrVswitch | The Vpc Or Vswith is not in a valid state for the attachment operation. | The error message returned because the status of the VPC or vSwitch does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.VpcResource | The resource is not in a valid state for the attachment operation. | The error message returned because this operation is not supported when the specified VPC is in an unstable state. Wait until all operations related to the VPC are completed. | diagnosis |
| 400 | IncorrectStatus.VpcRouteEntry | The resource is not in a valid state for the attachment operation. | The error message returned because the status of the VPC route entry does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.VpcRouteTable | The VPC route table is not in a desired state. | The error message returned because the VPC route table is in an unstable state. Try again later. | diagnosis |
| 400 | IncorrectStatus.VpcSwitch | The resource is not in a valid state for the attachment operation. | The error message returned because the status of the vSwitch does not support this operation. Try again later. | diagnosis |
| 400 | IncorrectStatus.VpcSwitch | Operation is failed because some virtual switch is modifying within the same VPC. | The error message returned because the status of the vSwitch does not support this operation. Try again later. | diagnosis |
| 404 | Instance.NotExist | The instance is not exist. | The error message returned because the specified instance does not exist. | diagnosis |
| 400 | InstanceExist | The instance already exists. | The error message returned because the specified instance already exists. | diagnosis |
| 400 | InstanceExist.AddTrafficMatchRules | The instance already exists. | The error message returned because the specified instance already exists. | diagnosis |
| 400 | InstanceExist.AggregationRoute | This aggregation route is already created. | The error message returned because the aggregated route already exists. | diagnosis |
| 400 | InstanceExist.TrafficMatchRules | The instance already exists. | The error message returned because the specified traffic match rules (TrafficMatchRules) already exist. | diagnosis |
| 400 | InstanceExist.TransitRouterInstance | The instance already exists. | The error message returned because a transit router with the same ID already exists in the current region. Transit router IDs in the same region must be unique. | diagnosis |
| 400 | InstanceExist.TransitRouterRouteEntry | The instance TransitRouterRouteEntry already exists. | The error message returned because the route entry that you want to add already exists. | diagnosis |
| 400 | InstanceExist.TrUpgradeApplication | The instance already exists. | The error message returned because the upgrade application has already been submitted. | diagnosis |
| 400 | InstanceNotExist | The instance is not exist. | The error message returned because the specified instance does not exist. | diagnosis |
| 400 | InstanceNotExist.AggregationRoute | The aggregation route is not exist. | The error message returned because the aggregated route does not exist. | diagnosis |
| 400 | InstanceNotExist.AggregationRoute | This aggregation route is not exist. | The error message returned because the aggregated route does not exist. | diagnosis |
| 400 | InstanceNotExist.TransitRouter | The aggregation route is not exist. | The error message returned because the specified transit router does not exist. | diagnosis |
| 400 | InstanceNotExist.TransitRouter | The transitRouter is not exist. | The error message returned because the specified transit router does not exist. | diagnosis |
| 400 | InstanceNotExist.TransitRouterRouteTable | The transitRouter route table is not exist. | The error message returned because the specified transit router route table does not exist. | diagnosis |
| 400 | InstanceNotExist.TransitRouterRouteTable | The transitRouter route table is not found. | diagnosis | |
| 400 | InstanceNotExist.TransitRouteTable | The transitRouter route table is not exist. | The error message returned because the specified transit router route table does not exist. | diagnosis |
| 400 | InstanceNotExist.TrRouteTableAggregationCidr | The aggregation route does not exist. | The aggregation route does not exist. | diagnosis |
| 400 | InstanceReferenced.ByPrefixlist | The Specified instance is referenced by tr prefix list. | The error message returned because the instance is referenced by a prefix list. Disassociate the instance from the prefix list first. | diagnosis |
| 400 | InstanceReferenced.VbrRouteEntry | Operation is failed because there is at least one route entry which next hop is the specified attachment. | Operation is failed because there is at least one route entry which next hop is the specified attachment. | diagnosis |
| 400 | InstanceReferenced.VpcRouteEntry | The specified attachment is referenced by vpc route entry. | The error message returned because the next hop of a VPC route is the specified attachment. | diagnosis |
| 400 | InstanceStatusNotSupport | The status of instance not support the operation. | The error message returned because the operation is not supported while the instance is in the current state. | diagnosis |
| 400 | InsufficientIpAddr.vsw | Insufficient available IP addresses in the vSwitch. | The error message returned because the number of available IP addresses in the vSwitch is insufficient. | diagnosis |
| 404 | InvalidAttachmentId.NotFound | The specified AttachmentId is not found. | The error message returned because the specified network instance connection ID does not exist. | diagnosis |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | The error message returned because resources are insufficient in the specified region. | diagnosis |
| 400 | InvalidCenId.NotFound | CenId is not found. | The error message returned because the specified CEN instance does not exist. | diagnosis |
| 400 | InvalidCenId.NotFound | The specified CenId is not found. | The error message returned because the specified CEN instance ID does not exist. | diagnosis |
| 404 | InvalidChildInstanceId.NotFound | The specified ChildInstanceId is not found. | The specified child instance ID does not exist. | diagnosis |
| 400 | InvalidCidrBlock | The cidr block is invalid. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | InvalidCidrBlock | The transitRouteTableAggregationCidr is invalid. | diagnosis | |
| 400 | InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | The error message returned because the specified CIDR block already exists. | diagnosis |
| 400 | InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | InvalidCidrBlock.Malformed | The specified CIDR block is not valid. | The error message returned because the specified CIDR block is invalid. | diagnosis |
| 400 | InvalidConnectPeerIds.NotFound | The Connect Peer Ids are invalid. | The Connect Peer Ids are invalid. | diagnosis |
| 404 | InvalidDeleteTrafficMatchRules.NotFound | The specified DeleteTrafficMatchRules are not found. | The error message returned because the value of the DeleteTrafficMatchRules parameter does not exist. | diagnosis |
| InvalidDescription | The description is invalid. | The description is incorrect. | diagnosis | |
| 400 | InvalidDescription | Description is invalid. | The error message returned because the description is invalid. | diagnosis |
| 400 | InvalidDescription | The description is invalid | The error message returned because the description is invalid. | diagnosis |
| 400 | InvalidDestinationCidrBlock.NotFound | DestinationCidrBlock is not found. | The error message returned because the specified destination CIDR block does not exist. | diagnosis |
| 400 | InvalidFilterKey | The key in filter is invalid. | The key in filter is invalid. | diagnosis |
| 400 | InvalidFlowlogId.exist | A flow log instance already exists in the current region of the CEN. | A flow log instance already exists in the current region of the CEN. | diagnosis |
| 400 | InvalidFlowlogId.exist | This cenId already has flowlog instance existed. | The error message returned because the specified CEN instance is already associated with a flow log. | diagnosis |
| 400 | InvalidFlowlogId.NotFound | The specified flow log ID does not exist or does not match with the CEN ID. | The specified flow log ID does not exist or does not match the CEN ID. | diagnosis |
| 400 | InvalidFlowlogId.NotFound | The specified flowlog id does not exist or does not match the cen Id. | The error message returned because the specified flow log does not exist. | diagnosis |
| 404 | InvalidInstanceId.NotFound | InstanceId is not found. | The error message returned because the specified instance does not exist. | diagnosis |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | The error message returned because the specified instance does not exist. | diagnosis |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | The error message returned because the specified instance type does not exist. | diagnosis |
| 400 | InvalidIpAddress | The ip address is invalid. | The error message returned because the specified IP address is invalid. | diagnosis |
| 400 | InvalidMulticastDomain.NotFound | The specified MulticastDomain is not found. | The error message returned because the specified multicast domain does not exist. | diagnosis |
| 400 | InvalidMulticastDomainId.NotFound | The specified AttachmentId is not found. | The error message returned because the specified multicast domain does not exist. | diagnosis |
| 400 | InvalidMulticastDomainId.NotFound | The specified MulticastDomainId is not found. | The error message returned because the specified multicast domain does not exist. | diagnosis |
| InvalidName | The name is invalid. | The error message returned because the name is invalid. | diagnosis | |
| 400 | InvalidName | Name is invalid. | The error message returned because the specified name is invalid. | diagnosis |
| 400 | InvalidName | The name is invalid | The error message returned because the specified name is invalid. | diagnosis |
| 400 | InvalidOperation | Operation is invalid. | The error message returned because the operation is invalid. | diagnosis |
| 409 | InvalidOperation.AssociatedBwpBusinessStatus | The associated CEN bandwidth package is not in a valid business state for the operation. | The error message returned because the status of the specified bandwidth plan does not support this operation. | diagnosis |
| 409 | InvalidOperation.AssociatedBwpStatus | The associated CEN bandwidth package is not in a valid state for the operation. | The error message returned because the status of the specified bandwidth plan does not support this operation. | diagnosis |
| 400 | InvalidOperation.BandwidthLimitNotExist | Operation is invalid because a bandwidth limit not exist. | The error message returned because the specified bandwidth cap of the bandwidth plan does not exist. | diagnosis |
| 400 | InvalidOperation.BondVbrAssociated | Illegal operation due to associated BondVBR. | Illegal operation due to associated BondVBR. | diagnosis |
| 400 | InvalidOperation.BondVbrExist | The operation failed due to BondVbr exists. | The operation failed because the BondVbr exists. | diagnosis |
| 400 | InvalidOperation.BwpBusinessStatus | The CBN bandwidth package is not in a valid business state for the operation. | The error message returned because this operation is not supported when the specified bandwidth plan is in an unstable state. | diagnosis |
| 403 | InvalidOperation.BwpInstanceStatus | The CBN bandwidth package is not in a valid state for the operation. | The error message returned because the status of the specified bandwidth plan does not support this operation. | diagnosis |
| 400 | InvalidOperation.BwpNotAssociated | Operation is invalid because a bandwidth package corresponding to the geographic span is not associated. | The error message returned because this operation is not supported when no bandwidth plan is applied to the specified region. | diagnosis |
| 400 | InvalidOperation.CapacityDecreaseRequestLimitExceeded | The operation is invalid, because you've exceeded the daily capacity decrease limit for this reservation. | The operation is invalid, because you've exceeded the daily capacity decrease limit for this reservation. | diagnosis |
| 400 | InvalidOperation.CapacityUnitsLimitExceeded | You've exceeded the capacity units limit. | You've exceeded the capacity units limit. | diagnosis |
| 400 | InvalidOperation.CbnBondVbrGatewayRelExist | Operation is invalid because the BondVbr has already been associated with Gateway. | Operation is invalid because the BondVbr has already been associated with Gateway. | diagnosis |
| 400 | InvalidOperation.CbnBondVbrStatus | The bond VBR instance is not in an operational steady state. | The bound VBR instance is not in an operational steady state. | diagnosis |
| 409 | InvalidOperation.CenAlreadyAutoPubilshRouteToInstance | Operation is invalid because other cen has already auto published route to this instance. | The error message returned because this operation is not supported when one or more other CEN instance can advertise routes to the specified instance. | diagnosis |
| 409 | InvalidOperation.CenInstanceStatus | The CEN instance is not in a valid state for the operation. | The error message returned because the status of the CEN instance does not support this operation. | diagnosis |
| 400 | InvalidOperation.CenRouteMapExist | Operation is invalid because an route map config exist. | The error message returned because this operation is not supported when a routing policy exists. | diagnosis |
| 400 | InvalidOperation.CloudRouteNumberInvalid | Cloud route number is invalid | The error message returned because the number of cloud service routes is invalid. | diagnosis |
| 403 | InvalidOperation.CloudRouteStatusNotAllow | Operation is prohibited because status of cloud route is invalid. | The error message returned because the status of the specified cloud service does not support this operation. Try again later. | diagnosis |
| 400 | InvalidOperation.CustomRegionDomainRouteEntryExist | Operation is invalid because custom region-domain route entry exist. | Operation is invalid because custom region-domain route entry exist. | diagnosis |
| 400 | InvalidOperation.DeploymentSetIsEmpty | The operation is invalid, due to the deployment set is empty. | The operation is invalid, due to the deployment set is empty. | diagnosis |
| 400 | InvalidOperation.DeploymentSetNotExist | The operation is invalid, because the deployment set is not supported. | The operation is invalid, because the deployment set is not supported. | diagnosis |
| 400 | InvalidOperation.DeploymentSetNotShared | The operation is invalid, the deployment set is not shared. | The operation is invalid, the deployment set is not shared. | diagnosis |
| 400 | InvalidOperation.DeploymentSetsConflicts | The Operation is invalid, due to the zone of the deployment set must belong to the vpc attachment. | The Operation is invalid, due to the zone of the deployment set must belong to the vpc attachment. | diagnosis |
| 400 | InvalidOperation.DeploymentSetStrategyNotSupport | The operation is invalid, because the deployment set strategy is not supported. | The operation is invalid, because the deployment set strategy is not supported. | diagnosis |
| 400 | InvalidOperation.EnhanceProtectionLevel | Your request to enhance CBN protection level cannot be processed. Please contact customer support to continue this operation. | Your request to enhance CBN protection level cannot be processed. Please contact customer support to continue this operation. | diagnosis |
| 409 | InvalidOperation.Forbidden | Operation is invalid because no grant to attach child-instance across uid. | The error message returned because you do not have the required permissions. | diagnosis |
| 400 | InvalidOperation.InstanceNotSupportIPv6Route | IPv6 routing has not been enabled for the CEN instance. | IPv6 routing is disabled for CEN. | diagnosis |
| 400 | InvalidOperation.MedRouteMapActionMustPermit | Operation is invalid because the default med map result must be permit. | Operation is invalid because the default med map result must be permit. | diagnosis |
| 400 | InvalidOperation.MedRouteMapExist | Operation is invalid because the default med route map already exist. | The operation is invalid because there is already a med routeMap with the next hop destination for this Ecr instance. | diagnosis |
| 400 | InvalidOperation.MedRouteMapNotAllowedOtherAction | Operation is invalid because the default med not allowed other action. | the med policy does not allow to configure other policies. | diagnosis |
| 400 | InvalidOperation.MulticastDomainAssociationExist | Operation is invalid because multicast domain associations exist. | The error message returned because this operation is not supported when the multicast domain is associated with a resource. | diagnosis |
| 400 | InvalidOperation.MulticastDomainAssociationNotExist | Operation is invalid because multicast association domain association not exist. | The error message returned because this operation is not supported when the specified multicast domain is not associated with the specified resource. | diagnosis |
| 400 | InvalidOperation.MulticastDomainAssociationStatus | Operation is invalid, due to multicast domain association not Active. | The error message returned because the status of the specified multicast domain does not support this operation. Try again later. | diagnosis |
| 400 | InvalidOperation.MulticastDomainInGroup | Operation is invalid because multicast domain has registered as multicast group member. | The error message returned because the specified multicast domain is added to a multicast group as a multicast member. | diagnosis |
| 400 | InvalidOperation.MulticastDomainStatus | Operation is invalid, due to multicast domain not Active. | The error message returned because the status of the specified multicast domain does not support this operation. | diagnosis |
| 400 | InvalidOperation.MulticastGroupExist | Operation is invalid because multicast groups exist. | The error message returned because this operation is not supported when a multicast domain group exists. | diagnosis |
| 400 | InvalidOperation.NetworkInterfaceNotExist | Operation is invalid bacause network interface not exist. | The error message returned because the network instance does not exist. | diagnosis |
| 400 | InvalidOperation.NoEffictiveAction | No effective action be configured. | The error message returned because the specified action is invalid. | diagnosis |
| 400 | InvalidOperation.Notfoundroute | You cannot query the system routing information of the specified instance. | You cannot query the system routing information of the specified instance. | diagnosis |
| 400 | InvalidOperation.NotFoundRoute | The specified route does not exist. | The error message returned because the route does not exist. | diagnosis |
| 400 | InvalidOperation.NTRNetworkInterfaceNotSupport | Operation is invalid, due to ntr eni not support. | The error message returned because the ENI of the transit router cannot be added to the multicast group. | diagnosis |
| 400 | InvalidOperation.OnlyOneRegionSupportIpv6 | Peer Attachment is only allowed when both regions support IPv6 or do not support IPv6 at all. | Peer Attachment is only allowed when both regions support IPv6 or do not support IPv6 at all. | diagnosis |
| 400 | InvalidOperation.OrderParameterIllegal | The order parameters are abnormal, please check whether the order parameters are correct and whether they conflict with existing orders. | The order parameters are abnormal, please check whether the order parameters are correct and whether they conflict with existing orders. | diagnosis |
| 400 | InvalidOperation.OrderTypeMustMatchGrantCrossAccount | The OrderType must be the same as the OrderType in the grant cross-account record. | The OrderType must be the same as the OrderType in the grant cross-account record. | diagnosis |
| 400 | InvalidOperation.PeerMulticastDomainSource | Operation is invalid because peer multicast domain can not be group source. | The error message returned because you cannot specify a multicast domain in another region as the multicast source. | diagnosis |
| 400 | InvalidOperation.PrependAsPathWithInvalidSourceInstanceIds | When using PrependAsPath in the RegionIn direction, SourceInstanceIds must be local instance ids. | When using PrependAsPath in the RegionIn direction, SourceInstanceIds must be local instance ids. | diagnosis |
| 400 | InvalidOperation.PrependAsPathWithInvalidSourceRegionId | When using PrependAsPath in the RegionIn direction, SourceRegionId must be local region ID. | When using PrependAsPath in the RegionIn direction, SourceRegionId must be local region ID. | diagnosis |
| 400 | InvalidOperation.PriorRequestNotComplete | This operation is invalid because a prior request has not been completed. | This operation is invalid because a prior request has not been completed. | diagnosis |
| 409 | InvalidOperation.PrivatezoneRouteExisted | Privatezone routes already existed. | The error message returned because the PrivateZone route already exists. | diagnosis |
| 403 | InvalidOperation.PvtzNotAssociatedWithVpc | Privatezone not associated with the specified vpc. | The error message returned because PrivateZone is not associated with the specified VPC. | diagnosis |
| 400 | InvalidOperation.RegionNotSupport | The operation is not supported in this region. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | InvalidOperation.RegionNotSupport | The Operation is not Support in this region. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | InvalidOperation.SaleValidateFailed | Sales expression validation system error. | Sales expression validation system error. | diagnosis |
| 400 | InvalidOperation.TransitRouterNotExist | Operation is invalid because the transit router not exist. | The error message returned because the specified transit router does not exist. | diagnosis |
| 400 | InvalidOperation.TrCapacityReservationReservation | Operation is invalid, due to the lack of permission for transit router capacity reservation. | Operation is invalid, due to the lack of permission for transit router capacity reservation. | diagnosis |
| 400 | InvalidOperation.TrDeploymentSet | Operation is invalid, due to the lack of permission for transit router deployment. | Operation is invalid, due to the lack of permission for transit router deployment. | diagnosis |
| 400 | InvalidOperation.TrMultiDeploymentSets | The operation is invalid because the transit router does not support multiple deployment sets. | The operation is invalid because the transit router does not support multiple deployment sets. | diagnosis |
| 409 | InvalidOperation.UnmatchRouteInVpcRegion | Operation Failed.Unmatch route in vpc region. | The VPC routes do not match the match conditions. | diagnosis |
| 400 | InvalidOperation.UnsupportChargeType | The charge type is not supported by this operation. | The error message returned because the specified billing method does not support this operation. | diagnosis |
| 400 | InvalidOperation.UnsupportFilter | The specified FeatureFilter is not supported by this operation. | The error message returned because the specified filter is invalid. | diagnosis |
| 400 | InvalidOperation.UnsupportFilterValue | The specified FeatureFilter Value is not supported by this operation. | The error message returned because the specified filter value is invalid. | diagnosis |
| 400 | InvalidOperation.UnsupportnexthopType | The specified next hop type is not supported by this operation. | The specified next hop type is not supported by this operation. | diagnosis |
| 400 | InvalidOperation.UnsupportnexthopType | The nexthop type is unsupported | The error message returned because the next hop type does not support this operation. | diagnosis |
| 400 | InvalidOperation.UnsupportRouteTableType | The route table type is unsupported | The error message returned because the specified route table type does not support this operation. | diagnosis |
| 400 | InvalidOperation.UpgradeBwpBandwidth | The operation is invalid because the upgrade is equal or less than the original bandwidth. | The operation is invalid because the upgrade is equal or less than the original bandwidth. | diagnosis |
| 400 | InvalidOperation.VbrAttachedToEcr | VBR has alreay attached to ECR. | VBR has alreay attached to ECR. | diagnosis |
| InvalidOperation.VbrCenAttachmentStatus | The VBR instance to CEN attachment is not in a valid state for the operation. | The error message returned because the VBR attachment is being processed. Try again later. | diagnosis | |
| 400 | InvalidOperation.VbrExistInBondVbr | The operation is invalid because there are one or more VBRs in the BondVBR. | The operation is invalid because there are one or more VBRs in the BondVBR. | diagnosis |
| 400 | InvalidOperation.VpcAutoRoutesPublishInOtherCEN | The specified VPC already has its routes synchronized with another CEN instance. | The error message returned because this operation is not supported when route synchronization is enabled between the current VPC and another CEN instance. | diagnosis |
| 409 | InvalidOperation.VpcNotAttachedToCen | Vpc not attached to cen. | The error message returned because the specified VPC is not attached to a CEN instance. | diagnosis |
| 400 | InvalidOperation.VpnAssociated | The operation is not supported because the VPC is associated with VPN. | The error message returned because the specified VPC is associated with a VPN. | diagnosis |
| 400 | InvalidOperation.VpnNetworkTypeInvalid | The network type of child-instance is invalid. | The error message returned because the network type specified for the instance is invalid. | diagnosis |
| 400 | InvalidParam.DestinationInstanceIds | When using "PrependAsPath" in the "RegionOut", "DestinationInstanceIds" must be local region instances. | When using the PrependAsPath option in a RegionOut configuration, the DestinationInstanceIds target instance should be within the local domain. | diagnosis |
| 400 | InvalidParam.RouteFilter | The parameter RouteFilter is invalid. | The error message returned because the specified route filter is invalid. | diagnosis |
| 400 | InvalidParam.RoutFilterKey | The specified Key of RouteFilter is invalid. | The error message returned because the specified route filter key is invalid. | diagnosis |
| InvalidParameter | The parameter is invalid. | The error message returned because the parameter is set to an invalid value. | diagnosis | |
| InvalidParameter | The specified parameter "Filter" is invalid. | The specified Filter is invalid. | diagnosis | |
| InvalidParameter | The specified parameter "ResourceUid" is invalid. | The specified ResourceUid is invalid. | diagnosis | |
| InvalidParameter | The specified parameter "ChildInstanceOwnerUid" is invalid. | The specified ChildInstanceOwnerUid is invalid. | diagnosis | |
| InvalidParameter | The specified parameter "BandwidthLimit" is invalid. | The specified BandwidthLimit is invalid. | diagnosis | |
| InvalidParameter | The specified parameter "PageSize" is invalid. | The specified PageSize is invalid. | diagnosis | |
| InvalidParameter | The specified parameter "PageNumber" is invalid. | The specified PageNumber is invalid. | diagnosis | |
| 400 | InvalidParameter | Invalid parameter. | The error message returned because the parameter is set to an invalid value. | diagnosis |
| 400 | InvalidParameter.ApplianceModeSupport | The specified parameter ApplianceModeSupport is invalid. | The parameter ApplianceModeSupport entered is illegal. | diagnosis |
| 400 | InvalidParameter.BondVbrId | The parameter BondVbrId is invalid. | The error message returned because the BondVbrId parameter is set to an invalid value. | diagnosis |
| 400 | InvalidParameter.Day | The Parameter Day is invalid. | The error message returned because the specified date is invalid. | diagnosis |
| 400 | InvalidParameter.FlowLogId | The specified flowlog id does not exist or does not match the cen Id. | The error message returned because the specified flow log ID is invalid. | diagnosis |
| 400 | InvalidParameter.FlowLogVersion | Flowlog version is invalid. | The specified flowlog version is invalid. | diagnosis |
| 400 | InvalidParameter.Interval | Interval is invalid. | The specified interval is invalid. | diagnosis |
| 400 | InvalidParameter.Ipv6Support | The specified parameter Ipv6Support is invalid. | The parameter Ipv6Support entered is illegal. | diagnosis |
| 400 | InvalidParameter.LogFormatString | LogFormatString is invalid. | The specified log format is invalid. | diagnosis |
| 400 | InvalidParameter.LogStoreName | Specified LogStore name is invalid. | Logstore name is invalid. | diagnosis |
| 400 | InvalidParameter.LogStoreNameConflict | The parameter LogStoreName is conflict. | The parameter LogStoreName is conflict. | diagnosis |
| 400 | InvalidParameter.MaxResults | The specified MaxResults is invalid. | The error message returned because the MaxResults parameter is set to an invalid value. | diagnosis |
| 400 | InvalidParameter.MedRouteMapDestInstanceIds | Param DestInstanceIds must be ecr instance id. | The destination instance list of med routeMap must be ECR instance. | diagnosis |
| 400 | InvalidParameter.MedRouteMapDestInstanceType | Param DestChildInstanceTypes must be ecr. | The destination instance type of the med routeMap must be ECR. | diagnosis |
| 400 | InvalidParameter.OrderType | The specified parameter OrderType is invalid. | The specified parameter OrderType is invalid. | diagnosis |
| 400 | InvalidParameter.ProjectName | Project name is invalid or does not belong to specified region. | The Project name is illegal or does not belong to the specified region. | diagnosis |
| 400 | InvalidParameter.ProjectName | ProjectName is invalid. | Project name is invalid. | diagnosis |
| 400 | InvalidParameter.RegionId | The specified Region Id is invalid. | The error message returned because the specified region ID is invalid. | diagnosis |
| 400 | InvalidParameter.TagKeyOrAll | The specified parameter TagKey or All is invalid. | The specified parameter TagKey or All is invalid. | diagnosis |
| 400 | InvalidParameter.TransitRouteTableAggregationScope | TransitRouteTableAggregationScope is invalid. | The propagation scope of the aggregate route is illegal. | diagnosis |
| 400 | InvalidParameter.TransitRouteTableAggregationScopeList | TransitRouteTableAggregationScopeList is invalid. | TransitRouteTableAggregationScopeList is invalid. | diagnosis |
| 400 | InvalidParameterCombination.TransitRouter | Region ID is required if no TransitRouterId or CenId specified. | The error message returned because you must specify at least a region, a transit router ID, or a CEN instance ID. | diagnosis |
| 400 | InvalidParamSize.TrafficQosQueues | The queue size included in the traffic QoS policy exceeds the limit. | The queue size included in the traffic scheduling policy exceeds the limit. | diagnosis |
| 400 | InvalidPeerTransitRouterId.NotFound | The specified PeerTransitRouterId is not found. | The error message returned because the specified peer transit router ID (PeerTransitRouterId) does not exist. | diagnosis |
| 400 | InvalidPeerTrMulticastDomainId.NotFound | The specified PeerTrMulticastDomainId is not found. | The error message returned because the specified multicast domain on the peer transit does not exist. | diagnosis |
| 400 | InvalidRouteEntry.NotFound | Route entry not exists. | The error message returned because the route entry does not exist. | diagnosis |
| 404 | InvalidRouteTableId.NotFound | The specified RouteTableId is not found. | The specified route table ID does not exist. | diagnosis |
| 400 | InvalidStatus.HealthCheck | Can not modify, please delete health check config first. | You must delete the health check configurations before you can make the modifications. | diagnosis |
| 400 | InvalidStatus.Prefixlist | Prefixlist is not in a operate status. | The error message returned because the status of the specified prefix list does not support this operation. | diagnosis |
| 400 | InvalidStatus.PrefixlistAssociation | The prefix list association is not in a valid state for the operation. | The error message returned because the status of the specified prefix list does not support this operation. Try again later. | diagnosis |
| 400 | InvalidStatus.Resource | The status of the specified resource is invalid. The resource cannot be renewed. | The error message returned because the status of the specified resource is invalid. The resource cannot be renewed. | diagnosis |
| 400 | InvalidStatus.ResourceStatus | The resource is not in a valid state for the attachment operation. | The error message returned because the status of the specified resource does not support this operation. Try again later. | diagnosis |
| 400 | InvalidStatus.VpcAttachedFullModeCen | The VPC has been attached to another CEN instance whose protection level is FULL. | The error message returned because the specified VPC is already attached to a CEN instance whose protection level is FULL. The VPC cannot be attached to other CEN instances. | diagnosis |
| 400 | InvalidTagKey | The tag keys are not valid. | The error message returned because the specified tag key is invalid. | diagnosis |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | The error message returned because the specified tag scope is invalid. | diagnosis |
| 400 | InvalidTagValue | The tag values are not valid. | The error message returned because the specified tag value is invalid. | diagnosis |
| 400 | InvalidTrafficMarkingPolicyId.NotFound | The specified TrafficMarkingPolicyId is not found. | The error message returned because the specified traffic marking policy ID (TrafficMarkingPolicyId) does not exist. | diagnosis |
| 400 | InvalidTrafficMarkingPolicyId.NotFound | Operation is failed because traffic marking policy id is not found. | The error message returned because the specified traffic marking policy ID (TrafficMarkingPolicyId) does not exist. | diagnosis |
| 400 | InvalidTrafficMarkingPolicyId.NotFound | TrafficMarkingPolicyId is not found. | The error message returned because the specified traffic marking policy ID (TrafficMarkingPolicyId) does not exist. | diagnosis |
| 400 | InvalidTrafficMatchRuleId.NotFound | TrafficMatchRuleId is not found. | TrafficMatchRuleId is not found. | diagnosis |
| 404 | InvalidTrafficQosPolicyId.NotFound | The specified TrafficQosPolicyId is not found. | The error message returned because the specified QoS policy ID (TrafficQosPolicyId) does not exist. | diagnosis |
| 400 | InvalidTrafficQosQueueId.NotFound | The specified TrafficQosQueueId is not found. | The error message returned because the specified QoS policy queue (TrafficQosQueueId) does not exist. | diagnosis |
| 400 | InvalidTrafficQosQueueId.NotFound | The instance of TrafficQosQueueId is not found. | diagnosis | |
| 404 | InvalidTransitQosId.NotFound | The specified TrafficQosPolicyId is not found. | The error message returned because the TrafficQosPolicyId parameter is set to an invalid value. | diagnosis |
| 400 | InvalidTransitRouterAttachmentId.NotFound | TransitRouterAttachmentId is not found. | The error message returned because the ID of the network instance does not exist. | diagnosis |
| 400 | InvalidTransitRouterAttachmentId.NotFound | The TransitRouterAttachmentId is not found. | The error message returned because the specified transit router attachment ID (TransitRouterAttachmentId) does not exist. | diagnosis |
| 400 | InvalidTransitRouterId.NotFound | TransitRouterId is not found. | The error message returned because the ID of the transit router does not exist. | diagnosis |
| 400 | InvalidTransitRouterId.NotFound | The specified TransitRouterId is not found. | The error message returned because the specified transit router does not exist. | diagnosis |
| 400 | InvalidTransitRouterId.NotFound | The specified TransitRouterId is not found. | The error message returned because the specified transit router ID (TransitRouterId) does not exist. | diagnosis |
| 400 | InvalidTransitRouterId.NotFound | TransitRouterId is not found | The error message returned because the specified transit router ID (TransitRouterId) does not exist. | diagnosis |
| 400 | InvalidTransitRouterInstance.NotFound | The Transit Router instance is not found. | The Transit Router instance is not found. | diagnosis |
| 400 | InvalidTransitRouterInstanceId.NotFound | The specified TransitRouterInstanceId is not found. | The specified TransitRouterInstanceId is not found. | diagnosis |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | The error message returned because the specified transit router mode is not supported. | diagnosis |
| 400 | InvalidTransitRouterMulticastDomainId.NotFound | The specified TransitRouterMulticastDomainId is not found. | The error message returned because the specified ID of the multicast domain (TransitRouterMulticastDomainId) on the transit router does not exist. | diagnosis |
| 400 | InvalidTransitRouterRouteEntryId.NotFound | TransitRouterRouteEntryId is not found. | TransitRouterRouteEntryId is not found. | diagnosis |
| 400 | InvalidTransitRouterRouteEntryNextHopId.NotFound | TransitRouterRouteEntryNextHopId is not found | The error message returned because the specified ID of the next hop (TransitRouterRouteEntryNextHopId) specified for the transit router route entry does not exist. | diagnosis |
| 400 | InvalidTransitRouterRouteTableId.NotFound | TransitRouterRouteTableId is not found. | The error message returned because the specified route table ID of the transit router does not exist. | diagnosis |
| 404 | InvalidTrAttachmentId.NotFound | The specified AttachmentId is not found. | The error message returned because the specified attachment ID does not exist. | diagnosis |
| 400 | InvalidValue.PrefixlistCidr | Invalid cidr exist in the specified prefixlist. | The error message returned because the specified prefix list contains an invalid CIDR block. | diagnosis |
| 400 | InvalidVpcId.NotFound | The specified VpcId is not found. | The error message returned because the specified VPC ID (VpcId) is invalid. | diagnosis |
| 400 | InvalidVpcId.NotValid | The specified Vpc is invalid. | The specified vpcId is invalid. | diagnosis |
| 400 | InvalidVpnId.NotFound | The specified vpn connection instance id does not exist. | The specified vpn connection instance id does not exist. | diagnosis |
| 404 | InvalidVSwitchId.NotFound | The specified VSwitchId is not found. | The error message returned because the specified vSwitch ID does not exist. | diagnosis |
| 404 | InvalidVSwitchId.NotFound | VSwitch not exist. | The error message returned because the specified vSwitch ID (VSwitchId) does not exist. | diagnosis |
| 400 | InvalidVSwitchId.NotFound | VSwitchId is not found. | The error message returned because the specified vSwitch ID (VSwitchId) does not exist. | diagnosis |
| 400 | INVALID_OPERATION_RESOURCE_NOT_SUPPORT_APPLIANCE_MODE | Only VPC attachment support appliance mode. | Only VPC attachment support appliance mode. | diagnosis |
| 400 | Invid.Parameter | When using GatewayRegionId, SourceRegionId must not be null | The error message returned because the GatewayRegionId and SourceRegionId parameters must be set. | diagnosis |
| 400 | Invid.Parameter | DestinationInstanceId is invalid. | The error message returned because the specified destination instance ID (DestinationInstanceId) is invalid. | diagnosis |
| 400 | Invid.Parameter | GatewayRegionId is invalid | The error message returned because the gateway region ID (GatewayRegionId) is invalid. | diagnosis |
| 400 | Invid.Parameter | SourceInstanceId is invalid. | The error message returned because the specified source instance ID (SourceInstanceId) is invalid. | diagnosis |
| 400 | Invid.Parameter | TransitRouter not exist. | The error message returned because the specified transit router does not exist. | diagnosis |
| 400 | Invid.Parameter | When using GatewayRegionId, GatewayZoneId must not be null | The error message returned because the GatewayRegionId and GatewayZoneId parameters must be set. | diagnosis |
| 400 | Invid.Parameter | When using GatewayRegionId, SourceRegionId must not be the same with tr region id | The error message returned because the specified gateway region ID (GatewayRegionId) and source region ID (SourceRegionId) cannot be the same. | diagnosis |
| 409 | IpAddressExist | Specified IpAddress is already exist. | The error message returned because the specified IP address (IpAddress) already exists. | diagnosis |
| 400 | MissingParam | The parameter %s is missing. | A required parameter is not specified. | diagnosis |
| 400 | MissingParam.Bandwidth | The parameter Bandwidth is mandatory. | The error message returned because no bandwidth value is specified. You must specify a bandwidth value. | diagnosis |
| 400 | MissingParam.CbnBandwidthPackageId | More than one applicable CEN bandwidth package exists. | More than one applicable CEN bandwidth package exists. | diagnosis |
| 400 | MissingParam.CbnBandwidthPackageId | There are more than one suitable cen bandwidth package | The error message returned because the CbnBandwidthPackageId parameter is not set. | diagnosis |
| 400 | MissingParam.CenIdOrRegionId | Either CenId or RegionId must be specified. | The error message returned because the CenId or RegionId parameter is not set. | diagnosis |
| 400 | MissingParam.ChildInstanceRouteTableId | The parameter TransitRouterAttachmentId is Missing. | The error message returned because the ChildInstanceRouteTableId parameter is not set. | diagnosis |
| 400 | MissingParam.DeploymentSets | The parameter DeploymentSets is mandatory. | The parameter DeploymentSets is mandatory. | diagnosis |
| 400 | MissingParam.MinimumTransitRouterCapacityOrDeploymentSets | The input parameter MinimumTransitRouterCapacity or DeploymentSets that is mandatory for processing this request is not supplied. | The input parameter MinimumTransitRouterCapacity or DeploymentSets that is mandatory for processing this request is not supplied. | diagnosis |
| 400 | MissingParam.NetworkType | NetworkType is required. | diagnosis | |
| 400 | MissingParam.RegionId | The parameter RegionId is mandatory. | The parameter RegionId is mandatory, please check your parameter. | diagnosis |
| 400 | MissingParam.RemainBandwidthPercent | RemainBandwidthPercent is missing. | RemainBandwidthPercent is missing. | diagnosis |
| 400 | MissingParam.TrafficMatchRules | The parameter TrafficMatchRules is empty. | diagnosis | |
| 400 | MissingParam.TransitRegionMappings | TransitRegionMappings parameter is missing in the parameter. | TransitRegionMappings parameter is missing in the parameter. | diagnosis |
| 400 | MissingParam.TransitRouterAttachmentId | The parameter TransitRouterAttachmentId is Missing. | The error message returned because the TransitRouterAttachmentId parameter is not set. | diagnosis |
| 400 | MissingParam.TransitRouterAttachments | The parameter TransitRouterAttachments is mandatory. | The error message returned because you must set the TransitRouterAttachments parameter. | diagnosis |
| 400 | MissingParam.TransitRouterId | The parameter TransitrouterId is mandatory. | The error message returned because the TransitRouterId parameter is not set. | diagnosis |
| 400 | MissingParam.TransitRouterIdOrTrafficMarkingPolicyId | Either TransitRouterId or TrafficMarkingPolicyId must be specified. | The error message returned because the TransitRouterId or TrafficMarkingPolicyId parameter is not set. | diagnosis |
| 400 | MissingParam.TransitRouterIdOrTrafficQosPolicyId | Either TransitRouterId or TrafficQosPolicyId must be specified. | The error message returned because the TransitRouterId or TrafficQosPolicyId parameter is not set. | diagnosis |
| 400 | MissingParam.TransitRouterIdOrTransitRouterRouteTables | Either TransitRouterId or TransitRouterRouteTables must be specified. | The error message returned because you must set at least one of the TransitRouterId and TransitRouterRouteTables parameters. | diagnosis |
| 400 | MissingParam.TransitRouterRouteEntryNextHopId | The parameter TransitRouterRouteEntryNextHopId is mandatory | The error message returned because the TransitRouterRouteEntryNextHopId parameter is not set. | diagnosis |
| 400 | MissingParam.transitRouterRouteTableId | Missing the parameter transitRouter route table id. | The error message returned because the transitRouterRouteTableId parameter is not set. | diagnosis |
| 400 | MissingParam.TransitRouterRouteTableId | The parameter TransitRouterRouteTableId is mandatory. | The error message returned because the TransitRouterRouteTableId parameter is not set. | diagnosis |
| 400 | MissingParam.TransitRouteTableAggregationScope | The parameter TransitRouteTableAggregationScope is mandatory. | The parameter TransitRouteTableAggregationScope is mandatory. | diagnosis |
| 400 | MissingParam.VSwitchIds | The parameter VSwitchIds is mandatory. | The error message returned because the VSwitchIds parameter is not set. | diagnosis |
| MissingParameter | The input parameter "LocalRegionId" that is mandatory for processing this request is not supplied. | The error message returned because the LocalRegionId parameter is not set. | diagnosis | |
| MissingParameter | The input parameter "HealthCheckTargetIp" that is mandatory for processing this request is not supplied. | The error message returned because the HealthCheckTargetIp parameter is not set. | diagnosis | |
| MissingParameter | The input parameter "BandwidthLimit" that is mandatory for processing this request is not supplied. | The error message returned because the BandwidthLimit parameter is not set. | diagnosis | |
| MissingParameter | The input parameter "OppositeRegionId" that is mandatory for processing this request is not supplied. | The error message returned because OppositeRegionId parameter is not set. | diagnosis | |
| MissingParameter | The input parameter "GeographicRegionId" that is mandatory for processing this request is not supplied. | You must specify GeographicRegionId. | diagnosis | |
| MissingParameter | The input parameter "ResourceBid" that is mandatory for processing this request is not supplied. | You must specify ResourceBid. | diagnosis | |
| MissingParameter | The input parameter "VbrInstanceRegionId" that is mandatory for processing this request is not supplied. | You must specify VbrInstanceRegionId. | diagnosis | |
| MissingParameter | The input parameter "CenRegionId" that is mandatory for processing this request is not supplied. | You must specify CenRegionId. | diagnosis | |
| MissingParameter | The input parameter "HealthCheckSourceIp" that is mandatory for processing this request is not supplied. | You must specify HealthCheckSourceIp. | diagnosis | |
| MissingParameter | The input parameter "VbrInstanceId" that is mandatory for processing this request is not supplied. | You must specify VbrInstanceId. | diagnosis | |
| MissingParameter | The input parameter "Bandwidth" that is mandatory for processing this request is not supplied. | You must specify the parameter. | diagnosis | |
| MissingParameter | The input parameter "GeographicRegionBId" that is mandatory for processing this request is not supplied. | You must specify GeographicRegionBId. | diagnosis | |
| MissingParameter | The input parameter "CenBandwidthPackageId" that is mandatory for processing this request is not supplied. | You must specify CenBandwidthPackageId. | diagnosis | |
| MissingParameter | The input parameter "GeographicRegionAId" that is mandatory for processing this request is not supplied. | You must specify GeographicRegionAId. | diagnosis | |
| MissingParameter | The input parameter "ResourceUid" that is mandatory for processing this request is not supplied. | You must specify ResourceUid. | diagnosis | |
| MissingParameter | The input parameter "ChildInstanceRouteTableId" that is mandatory for processing this request is not supplied. | You must specify ChildInstanceRouteTableId. | diagnosis | |
| MissingParameter | The input parameter "ChildInstanceType" that is mandatory for processing this request is not supplied. | You must specify ChildInstanceType. | diagnosis | |
| MissingParameter | The input parameter "CenId" that is mandatory for processing this request is not supplied. | You must specify CenId. | diagnosis | |
| MissingParameter | The input parameter "ChildInstanceRegionId" that is mandatory for processing this request is not supplied. | You must specify ChildInstanceRegionId. | diagnosis | |
| MissingParameter | The input parameter "ChildInstanceId" that is mandatory for processing this request is not supplied. | You must specify ChildInstanceId. | diagnosis | |
| 400 | MissingParameter | Missing parameter. | The error message returned because one or more required parameters are not set. | diagnosis |
| 400 | MissingParameter.CenId | The parameter CenId is mandatory. | The parameter CenId is mandatory. | diagnosis |
| 400 | MissingParameter.InstanceId | The parameter InstanceId is mandatory. | The parameter InstanceId is mandatory. | diagnosis |
| 400 | MissingParameter.MinimumTransitRouterCapacity | The parameter MinimumTransitRouterCapacity is mandatory. | The parameter MinimumTransitRouterCapacity is mandatory. | diagnosis |
| 400 | MissingParameter.OrderType | The parameter OrderType is mandatory. | The parameter OrderType is mandatory. | diagnosis |
| 400 | MissingParameter.OwnerIdOrOwnerAccount | Either OwnerAccount or OwnerId must be specified. | Either OwnerAccount or OwnerId must be specified. | diagnosis |
| 400 | MissingParameter.OwnerIdOrOwnerAccount | The input parameter OwnerAccount or OwnerId that is mandatory for processing this request is not supplied | The error message returned because the OwnerId or OwnerAccount parameter is not set. | diagnosis |
| 400 | MissingParameter.RegionId | Missing RegionId parameter. | Missing RegionId parameter. | diagnosis |
| 400 | MissingParameter.ScopeListOrScope | The input parameter TransitRouteTableAggregationScopeList or TransitRouteTableAggregationScope that is mandatory for processing this request is not supplied. | The input parameter TransitRouteTableAggregationScopeList or TransitRouteTableAggregationScope that is mandatory for processing this request is not supplied. | diagnosis |
| 400 | MissingParameter.TagKey | TagKey must be specified. | The error message returned because you must set the TagKey parameter. | diagnosis |
| 400 | MissingParameter.TagValue | The specified parameter TagValue is missing | The error message returned because the TagValue parameter is not set. | diagnosis |
| 400 | MissingParameter.TrafficMarkingPolicyId | The parameter TrafficMarkingPolicyId is mandatory. | The parameter TrafficMarkingPolicyId is mandatory. | diagnosis |
| 400 | MissingParameter.TrafficMatchRuleId | The parameter TrafficMatchRuleId is mandatory. | The parameter TrafficMatchRuleId is mandatory. | diagnosis |
| 400 | MissingParameter.TransitRouterInstanceId | The parameter TransitRouterInstanceId is mandatory. | The parameter TransitRouterInstanceId is mandatory. | diagnosis |
| 400 | MultipleFound.PrefixlistAssociation | multiple same prefix association record found. | The error message returned because multiple configuration duplicates exist in the system. | diagnosis |
| 400 | NameDescriptionNull | The name or description is empty | The error message returned because the name or description must be specified. | diagnosis |
| 400 | NeedOpenProduct | The user has not activated the transit router service. | The error message returned because the transit router feature is not activated. | diagnosis |
| 400 | NoPermission.AliyunServiceRoleForCEN | You are not authorized to create the service linked role. Role Name: AliyunServiceRoleForCEN. Service Name: cen.aliyuncs.com. Make sure that the user has been granted the ram:CreateServiceLinkedRole permission. | The error message because you do not have the permissions to create the service-linked role whose role name is AliyunServiceRoleForCEN and service name is cen.aliyuncs.com. You must acquire the ram:CreateServiceLinkedRole permission before you can create the service-linked role. | diagnosis |
| 400 | NoPermission.AliyunServiceRoleForCEN | No permission to open AliyunServiceRole for CEN. | The error message returned because you do not have the required permissions. | diagnosis |
| 403 | NoPermission.AliyunServiceRoleForTRFlowLog | You are not authorized to create service linked role AliyunServiceRoleForTRFlowLog. | You are not authorized to create service linked role AliyunServiceRoleForTRFlowLog. | diagnosis |
| 400 | NoPermission.AliyunServiceRolePolicyForCEN | You are not authorized to create the service linked role. Role Name: AliyunServiceRolePolicyForCEN. Service Name: cen.aliyuncs.com. Make sure that the user has been granted the ram:CreateServiceLinkedRole permission. | The error message returned because you do not have the permissions to create the service-linked role whose role name is AliyunServiceRolePolicyForCEN and service name is cen.aliyuncs.com. You must acquire the ram:CreateServiceLinkedRole permission before you can create the service-linked role. | diagnosis |
| 400 | NotSupport.AttachmentRoute | Not support such attachment route. | This attachment route is not supported. | diagnosis |
| 400 | NotSupport.TrType | The basic tr type is not support for this operation. | The error message returned because this operation is not supported by Basic Edition transit routers. | diagnosis |
| 400 | Operation.Failed | Spec of the specified bandwidth package is not changed, please check again. | The error message returned because the specification of the bandwidth plan is not modified. | diagnosis |
| 400 | OperationDenied.AttachmentExist | Operation is not allowed because the specified instance has already been attached to CEN. | Operation is not allowed because the specified instance has already been attached to CEN. | diagnosis |
| 400 | OperationDenied.ECSPrefixList | Associate ECS PrefixList is not supported. | Associate ECS PrefixList is not supported. | diagnosis |
| 400 | OperationDenied.RouteEntryOnEni | Operation is failed because there is at least one route entry which next hop is the specified eni. | The error message returned because this operation is not supported when a route points to an ENI. | diagnosis |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because of RouteTableTypeNotPermitted. | The error message returned because this operation is not supported by the specified type of route table. | diagnosis |
| 400 | OperationDenied.SystemPrefixList | SystemPrefixList can not be operated. | The error message returned because this operation is not supported by the system prefix list. | diagnosis |
| 400 | OperationFailed.AggregationRouteExist | Operation is invalid because transit router aggregation route exists. | diagnosis | |
| 400 | OperationFailed.AggregationRouteExist | Operation failed because TransitRouterRouteAggregation exists. | Operation failed because TransitRouterRouteAggregation exists. | diagnosis |
| 400 | OperationFailed.AllocateCidrFailed | Operation failed because vpn allocate cidr failed. | The error message returned because the VPN failed to apply for a CIDR block. | diagnosis |
| 400 | OperationFailed.AllocateTrCidrBlock | Operation failed because allocate cidr failed. | The error message returned because the application for allocating CIDR blocks to the transit router failed. | diagnosis |
| 400 | OperationFailed.AttachmentReferencedVpcRouteEntryExisted | Operation is failed because there is at least one route entry which next hop is the specified attachment. | The error message returned because this operation is not supported when a route points to an attachment. | diagnosis |
| 400 | OperationFailed.BandwidthLimitExist | Operation is invalid because a bandwidth limit exist. | Please delete all cross region bandwidth limits associated with current TR and try again. | diagnosis |
| 400 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | The error message returned because your basic information is incomplete. Complete your basic information and try again. | diagnosis |
| 400 | OperationFailed.BasicTrNotSupport | Operation failed because the Basic TransitRouter does not support RouteTable | The error message returned because this operation is not supported by Basic Edition transit routers. | diagnosis |
| 400 | OperationFailed.CCNAttached | Can not delete transit router because CCN still attached. | The error message returned because the transit router cannot be deleted when it is connected to a CCN instance. | diagnosis |
| 400 | OperationFailed.CCNTrNotSupport | Operation failed because the CCN transit router does not support route table. | The error message returned because transit routers deployed in CCN regions do not allow you to create route tables. | diagnosis |
| 400 | OperationFailed.CenReferencedVpcRouteEntryExisted | Operation is failed because there is at least one route entry which next hop is the specified cen. | diagnosis | |
| 400 | OperationFailed.CidrBlockAllocated | Cidr blocks are allocated from the cidr, which should be released first. | The error message returned because the specified CIDR block is already occupied. Release the resources that occupy the CIDR block and try again. | diagnosis |
| 400 | OperationFailed.CidrConflict | Operation is invalid because the cidr conflict. | The error message returned because the specified CIDR block conflicts with another one. | diagnosis |
| 400 | OperationFailed.CidrNotExist | cidr is not exist. | The error message returned because the specified CIDR block does not exist. | diagnosis |
| 400 | OperationFailed.CloudRouteExist | Cloud service routes exist. | The error message returned because a cloud service route exists. Delete the route and try again. | diagnosis |
| 400 | OperationFailed.CloudRouteExist | Operation is invalid because cloud route exists. | diagnosis | |
| 400 | OperationFailed.ConcurrentOperation | The operation failed caused by concurrent operation. | The error message returned because the concurrent operations failed. Do not frequently perform this operation. Try again later. | diagnosis |
| 400 | OperationFailed.ConnectPeerExist | Operation is invalid because connect peer exists. | The error message returned because this operation is not supported when a connect peer exists. Delete the connect peer and try again. | diagnosis |
| 400 | OperationFailed.ContainsForbiddenLabel | You cannot place the order because orders are prohibited by a label. | You cannot place the order because orders are prohibited by a label. | diagnosis |
| 400 | OperationFailed.CreateRouteEntryWithCCNAttachment | Operation failed because routeEntry to CCN attachment is not supported. | The error message returned because you are not allowed to set the next hop to a CCN instance. | diagnosis |
| 400 | OperationFailed.CreateRouteEntryWithCCNAttachment | Operation failed because Create RouteEntry to CCN Attachment does not support. | The error message returned because routes that point to a CCN attachment are not supported. | diagnosis |
| 400 | OperationFailed.CreateRouteEntryWithConnectAttachment | Operation failed because Create RouteEntry to connect Attachment does not support. | You cannot create a route that points to a connect attachment. | diagnosis |
| 400 | OperationFailed.CreateRouteEntryWithSameDestinationCidrBlock | Operation failed because Create RouteEntry with same destination cidrblock does not support. | The error message returned because the destination CIDR block of each route entry in the route table must be unique. | diagnosis |
| 400 | OperationFailed.CreateTransitRouterConnectAttachment | Operation failed because transit router not support multicast. | The error message returned because the transit router does not support multicast and the connect attachment failed to be created. | diagnosis |
| 400 | OperationFailed.CreateTransitRouterRouteEntryWithVPCAttachment | The specified VPC Attachment has not enable IPv6. | The specified VPC Attachment has not enable IPv6. | diagnosis |
| 400 | OperationFailed.CreateTransitRouterRouteEntryWithVPNAttachment | Create RouteEntry to VPN Attachment does not support IPv6. | Create RouteEntry to VPN Attachment does not support IPv6. | diagnosis |
| 400 | OperationFailed.DeleteCenWithCustomRouteTable | Operation failed because you are not allowed to delete the CEN with the custom transit router route table. | The error message returned because you are not allowed to delete the CEN instance unless all custom route tables are deleted from the CEN instance. | diagnosis |
| 400 | OperationFailed.DeleteCenWithRouteEntry | Operation failed because you are not allowed to delete the CEN with the transit router route entry. | The error message returned because you are not allowed to delete the CEN instance unless all custom route entries are deleted from the CEN instance. | diagnosis |
| 400 | OperationFailed.DeleteRouteTableWithAssociation | Operation failed because you are not allowed to delete TransitRouterRouteTable with association | The error message returned because the route table cannot be deleted when it is associated with a forwarding correlation. Disassociate the route table from the forwarding correlation and try again. | diagnosis |
| 400 | OperationFailed.DeleteRouteTableWithPropagation | Operation failed because you are not allowed to delete transit router route table with propagation | The error message returned because the route table cannot be deleted when it is associated with a route leaning policy. Disassociate the route table from the route learning policy and try again. | diagnosis |
| 400 | OperationFailed.DeleteRouteTableWithRouteAggregation | Operation is invalid because delete route table with route aggregation. | The error message returned because the specified route table contains one or more aggregated routes. Delete the aggregated routes and try again. | diagnosis |
| 400 | OperationFailed.DeleteRouteTableWithRouteEntry | Operation failed because you are not allowed to delete transit touter route table with route entry | The error message returned because the route table cannot be deleted when it contains a route entry. Delete all route entries from the route table and try again. | diagnosis |
| 400 | OperationFailed.DeleteSystemRouteTable | Operation failed because You are not allowed to Delete System Transit Route Table. | The error message returned because system route tables cannot be deleted. | diagnosis |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteEntry exists | The error message returned because the specified transit router cannot be deleted unless all route entries are deleted from the transit router. | diagnosis |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable exists | The error message returned because the specified transit router cannot be deleted unless all custom route tables are disassociated from the transit router. | diagnosis |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable or TransitRouterRouteEntry or BandwidthTransitRegion exists. | The error message returned because this operation is not supported when a custom route or a custom route table exists, or bandwidth multiplexing is enabled. Delete the custom route table and route, disable bandwidth multiplexing, and then try again. | diagnosis |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable or TransitRouterRouteEntry exists. | The error message returned because this operation is not supported when a custom route table or route entry exists. Delete the custom route table and route entry and try again. | diagnosis |
| 400 | OperationFailed.DeleteTransitRouter | Operation failed because TransitRouterRouteTable or TransitRouterRouteEntry or BandwidthTransitRegion exists. | The error message returned because this operation is not supported when a custom route or a custom route table exists, or bandwidth multiplexing is enabled. Delete the custom route table and route, disable bandwidth multiplexing, and then try again. | diagnosis |
| 400 | OperationFailed.DeleteTransitRouterRouteEntry | Operation failed because this route entry is created automatically. | You cannot delete a route that is automatically created by the system. | diagnosis |
| 400 | OperationFailed.FlowLogExist | Flow log configurations exist. Delete the flow log configurations and retry the operation. | Flow log configurations exist. Delete the flow log configurations and retry the operation. | diagnosis |
| 400 | OperationFailed.FlowLogExistOrNisOpened | Operation failed because FlowLog exists or Nis opened. | The error message returned because this operation is not supported when a flow log exists or the NIS service is activated. | diagnosis |
| 400 | OperationFailed.GrantCrossAccountExist | Cross-account authorization already exists. | Cross-account authorization already exists. | diagnosis |
| 400 | OperationFailed.GrantCrossAccountNotExist | Cross-account authorization does not exist. | Cross-account authorization does not exist. | diagnosis |
| 400 | OperationFailed.InsufficientAvailableQuota | Operation failed due to the account quota is insufficient. | The available amount of the account is insufficient. | diagnosis |
| 400 | OperationFailed.InsufficientBalance | Your account does not have enough balance. | The error message returned because your Alibaba Cloud account has overdue payments. | diagnosis |
| 400 | OperationFailed.InterRegionCloudRouteEntryExist | Operation failed because inter region cloud route associated with specified attachment exist. | Inter region cloud route associated with specified attachment exist. | diagnosis |
| 400 | OperationFailed.InvalidChildInstanceType | Operation failed. Child instance type is invalid for this operation. | The specified type of child instance is invalid. | diagnosis |
| 400 | OperationFailed.InvalidChildInstanceType | Child instance type is invalid for this operation. | diagnosis | |
| 400 | OperationFailed.InvalidLogInfo | The entered log service information is invalid. Check whether the ProjectName and LogStoreName are correct, and whether Log Service has been activated. | The entered log service information is invalid. Check whether the ProjectName and LogStoreName are correct, and whether Log Service has been activated. | diagnosis |
| 400 | OperationFailed.InvalidOperation | The operation failed because it is not supported. | The operation failed because it is not supported. | diagnosis |
| 400 | OperationFailed.InvalidTransitRouter | Operation failed because the transit router is not supported. | Operation failed because the transit router is not supported. | diagnosis |
| 400 | OperationFailed.InvalidVpcStatus | The status of the specified VPC does not support this operation. | The error message returned because this operation is not supported when the VPC is in the current state. Try again later. | diagnosis |
| 400 | OperationFailed.IpAddressExhausted | No IP addresses are available for allocation. | The operation failed because no IP addresses can be allocated. | diagnosis |
| 400 | OperationFailed.MulticastDomainAssociationExist | The specified TransitRouterAttachment has configured MulticastDomainAssociation. Please remove the configuration first. | The error message returned because the specified transit router attachment (TransitRouterAttachment) is added to a multicast domain. Remove the attachment from the multicast domain and try again. | diagnosis |
| 400 | OperationFailed.MulticastDomainExist | Operation is invalid because multicast domain exists. | The error message returned because the transit router is associated with a multicast domain. Disassociate the transit router from the multicast domain before you delete the transit router. | diagnosis |
| 400 | OperationFailed.MulticastGroupExist | Operation is invalid because multicast group exists. | The error message returned because this operation is not supported when a multicast group exists. | diagnosis |
| 400 | OperationFailed.MulticastGroupExist | Operation is failed because connect peer exists in multicast groups. | The error message returned because the connect peer is in a multicast group. Remove the connect peer from the multicast group and try again. | diagnosis |
| 400 | OperationFailed.MulticastGroupExist | Operation is failed because attachment exists in multicast groups. | The error message returned because the specified attachment is in a multicast group. Remove the attachment from the multicast group and try again. | diagnosis |
| 400 | OperationFailed.NoAvailablePaymentMethod | No payment method is specified for your account. We recommend that you add a payment method. | The error message returned because no payment method is specified for your account. Specify a payment method and try again. | diagnosis |
| 400 | OperationFailed.NoRealNameAuthentication | No real-name authentication was applied. | No real-name authentication was performed. | diagnosis |
| 400 | OperationFailed.NotSupportForceDelete | Not support force delete attachment. | The error message returned because the specified resource cannot be forcefully deleted. | diagnosis |
| 400 | OperationFailed.NoVbrAttachedToCEN | Operation is invalid because no vbr attached to cen. | The error message returned because the operation is not supported when the specified CEN instance is not connected to a VBR. | diagnosis |
| 400 | OperationFailed.OperateShareResource | Operate share prefixlist failed. | The error message returned because the specified prefix list failed to be shared. | diagnosis |
| 400 | OperationFailed.OperationIsProcessing | The operation failed because another operation is being processed. | The error message returned because another operation is being performed. | diagnosis |
| 400 | OperationFailed.OrderIsProcessing | The operation failed because the order is being processed. | The error message returned because the order is being processed. | diagnosis |
| 400 | OperationFailed.PostPay95BwpNotAllowEnterpriseTr | Cbn with post pay 95 bandwidth package does not allow enterprise tr. | Cbn with post pay 95 bandwidth package does not allow enterprise tr. | diagnosis |
| 400 | OperationFailed.PrefixListAssociationExist | Operation is invalid because prefixList association exists. | diagnosis | |
| 400 | OperationFailed.PrefixListExist | Operation failed because PrefixList exists. | The error message returned because a prefix list exists. | diagnosis |
| 400 | OperationFailed.PrefixListExist | Operation is invalid because prefix list exists. | The error message returned because this operation is not supported when a prefix list exists. Delete the prefix list and try again. | diagnosis |
| 400 | OperationFailed.PurchaseQuantityLimit | You have exceeded the maximum quantity you can purchase. | The error message returned because the number of instances has reached the upper limit and you cannot purchase more. | diagnosis |
| 400 | OperationFailed.QuerryCommodityPrice | Failed to query the commodity price. | diagnosis | |
| 400 | OperationFailed.QuotaNotEnough | The quota is not enough. | The error message returned because the resource quota is exhausted and you cannot create more. | diagnosis |
| 400 | OperationFailed.RIInstanceExist | Operation is failed because RI exists. | The error message returned because this operation is not supported when an RI instance exists. | diagnosis |
| 400 | OperationFailed.Risk | The error message returned because a security risk with your payment method is detected. Click the URL in your email or internal message to verify your payment method and then place your order again. | The error message returned because a security risk with your payment method is detected. Click the URL in your email or internal message to verify your payment method and then place your order again. | diagnosis |
| 400 | OperationFailed.RouteConflict | Route conflict exists in routing table. | The error message returned because two or more routes in the route table conflict with each other. | diagnosis |
| 400 | OperationFailed.RouteEntryExist | Failed to delete the instance because a route table entry points to the instance. | Failed to delete the instance because one or more routes point to the instance. Delete the routes and try again. | diagnosis |
| 400 | OperationFailed.RouteTableAssociationExist | Operation failed because TransitRouterRouteTable exists | The error message returned because you cannot perform the operation when the connection is associated with a route table. | diagnosis |
| 400 | OperationFailed.RouteTableAssociationExist | Operation failed because TransitRouterRouteTable exists. | The error message returned because a transit router route table (TransitRouterRouteTable) exists. | diagnosis |
| 400 | OperationFailed.RouteTableAssociationExist | Operation failed because there is associated routing table. | The network connection deletion failed because there is an associated routing table. | diagnosis |
| 400 | OperationFailed.RouteTablePropagationExist | The specified TransitRouterAttachment has configured RouteTablePropagation. Please remove the configuration first. | The error message returned because you cannot perform the operation when a route learning correlation is configured for the network instance connection. Disassociate from the route learning correlation and try again. | diagnosis |
| 400 | OperationFailed.RouteTablePropagationExist | Operation failed because You are not allowed to delete TransitAttachment with TransitRouter RouteTable Associated. | The error message returned because the transit route attachment (TransitAttachment) is associated with a route table. Disassociate the attachment from the route table and try again. | diagnosis |
| 400 | OperationFailed.SetPostPay95BandwidthLimitError | Operation failed because set postpay 95 bandwidth limit error. | The error message returned because you failed to switch to the pay-by-95-percentile-bandwidth metering method. | diagnosis |
| 400 | OperationFailed.SourceIpUnSupported | The specified source IP address is unsupported. | The error message returned because the specified source IP address is not supported. Enter a valid IP address and try again. | diagnosis |
| 400 | OperationFailed.StatusNotSupport | The VBR or VPC instance to CBN attachment is not in a valid state for the operation. | The error message returned because the status of the VBR or VPC does not support this operation. Try again later. | diagnosis |
| 400 | OperationFailed.TaskConflict | The operation is too frequent, please wait a moment and try again. | The error message returned because this operation is performed at a high frequency. Try again later. | diagnosis |
| 400 | OperationFailed.TrafficMarkingPolicyExist | Operation is invalid because traffic marking policy exists. | The error message returned because the transit router is associated with a traffic marking policy. Disassociate the transit router from the traffic marking policy before you delete the transit router. | diagnosis |
| 400 | OperationFailed.TrafficMarkingPolicyExist | Operation is invalid because transit router traffic marking policy exists. | diagnosis | |
| 400 | OperationFailed.TrafficQosExist | Operation failed because TrafficQos exists | The error message returned because a QoS policy exists. Delete the QoS policy and try again. | diagnosis |
| 400 | OperationFailed.TrafficQosPolicyExist | Operation is invalid because traffic qos policy exists. | The error message returned because this operation is not supported when a QoS policy exists. Delete the QoS policy and try again. | diagnosis |
| 400 | OperationFailed.TransitRouterNotExist | Operation failed because transit router not exist. | The error message returned because the specified transit router does not exist. | diagnosis |
| 400 | OperationFailed.TransitRouterType | Operation failed because transit router type not support this operation. | The error message returned because this operation is not support by the specified type of transit router. | diagnosis |
| 400 | OperationFailed.TransitRouterType | The specified TransitRouterType does not support the operation. | The error message returned because this operation is not supported by the specified type of transit router. | diagnosis |
| 400 | OperationFailed.TransitRouterType | Operation failed because The Basic TransitRouter does not support this action. | The error message returned because this operation is not supported by Basic Edition transit routers. | diagnosis |
| 400 | OperationFailed.UpDownRadeConfigNoChange | The operation failed because the config not change. | The error message returned because the configurations are not modified. | diagnosis |
| 400 | OperationFailed.UseStoredCardFailed | Operation failed because use stored card failed. | The error message returned because you failed to complete the payment with the specified stored-value card. | diagnosis |
| 400 | OperationFailed.ValidateVbrInstanceFailedForLowLatencyCircuit | Operation failed when validate VBR instance for Low Latency Circuit. | Failed to verify the loaded VBR instance when creating a low latency link. | diagnosis |
| 400 | OperationFailed.VbrAttachedVbrHa | The operation is failed for VBR HA is configured for specified VBR instance. | The operation is failed for VBR HA is configured for specified VBR instance. | diagnosis |
| 400 | OperationFailed.VbrWithAllowPrefixes | Operation failed because allow prefixes referenced by vbr exists. | A route prefix on the VBR is assigned the Allow action, which causes the operation to fail. | diagnosis |
| 400 | OperationFailed.VpcNotAttachedToCen | Operation failed because vpc not attached to cen. | The error message returned because the specified VPC is not associated with a CEN instance. | diagnosis |
| 400 | OperationFailed.VSwitchIpv6CidrNotAllocated | The specified vswitch does not have IPv6 address allocated. | The specified vswitch does not have IPv6 address allocated. | diagnosis |
| 400 | OperationFailed.VSwitchNotFound | The specified vswitch not found. | The specified vswitch not found. | diagnosis |
| 400 | OperationInvalid.AttachmentReferencedIPv6RouteEntryExisted | Operation is failed because there is at least one route entry(IPv6) which next hop is the specified attachment. | Operation is failed because there is at least one route entry(IPv6) which next hop is the specified attachment. | diagnosis |
| 400 | OperationInvalid.AttachmentReferencedVpcIPv6RouteEntryExisted | The specified attachment is referenced by vpc route entry(IPv6). | The specified attachment is referenced by vpc route entry(IPv6). | diagnosis |
| 400 | OperationInvalid.EniReferencedIPv6RouteEntryExisted | Operation is failed because there is at least one route entry(IPv6) which next hop is network interface that the specified attachment referenced. | Operation is failed because there is at least one route entry(IPv6) which next hop is network interface that the specified attachment referenced. | diagnosis |
| 400 | OperationInvalid.IdentityRegistrationStatusNotSupport | Real name registration of enterprises required. | Since you have selected a certain region of "Mainland China" in the "Region" or "Opposite Region" , you must complete the enterprise real name registration before subscription. Please refer to the documentation on enterprise real name registration for details. | diagnosis |
| 400 | OperationInvalid.IncompatibleFlowlogExist | Operation is invalid because incompatible flowlog config exists. | There are incompatible Flowlog configurations, please delete and try again. | diagnosis |
| 400 | OperationInvalid.UserCanNotBuyCrossBorderBwp | According to the laws and regulations of the operator and mainland China, you are currently not eligible to purchase or renew a cross-border bandwidth package. Please contact online customer service or your business manager for consultation. | According to the laws and regulations of the operator and mainland China, you are currently not eligible to purchase or renew a cross-border bandwidth package. Please contact online customer service or your business manager for consultation. | diagnosis |
| 400 | OperationNotAllowed.DefaultLinkTypeOnlySupportGold | Operation is not allowed because this user can only set default link type to Gold. | This user can only set the default link type to Gold. | diagnosis |
| 400 | OperationNotAllowed.DefaultLinkTypeOnlySupportUnderlaySilver | This user can only set the default link type to UnderlaySilver. | This user can only set the default link type to UnderlaySilver. | diagnosis |
| 400 | OperationNotSupport.VpcAutoRoutesPublish | Auto publish vpc routes is not supported in this region. | The error message returned because automatic route advertising for VPCs is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.action | This action is not supported. | This action is not supported. | diagnosis |
| 400 | OperationUnsupported.action | This action is not support. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.AdvancedFeature | The specified VPC does not support this operation. | The error message returned because this operation is not supported by the VPC. | diagnosis |
| 400 | OperationUnsupported.Associate | The specified attachment or routeTable is not supported by this operation. | The error message returned because this operation is not supported by the specified attachment or route table. | diagnosis |
| 400 | OperationUnsupported.Attachment | The cross region connection contains an existing bandwidth. The operation is not supported. | The error message returned because bandwidth multiplexing is enabled for the inter-region connection. | diagnosis |
| 400 | OperationUnsupported.Attachment | Transit region connection does not support the operation. | Cross-region connection does not support the operation. | diagnosis |
| 400 | OperationUnsupported.AutoPublishRouteEnabled | Connect attachment not support AutoPublishRouteEnabled. | The error message returned because the connect attachment does not support route synchronization. | diagnosis |
| 400 | OperationUnsupported.BandwidthType | The specified BandwidthType does not support the operation. | The error message returned because this operation is not supported by the specified bandwidth type. | diagnosis |
| 400 | OperationUnsupported.CenFullLevel | CEN full level does not support TransitRouter | The error message returned because CEN instances of the Full type do not support Enterprise Edition transit routers. | diagnosis |
| 400 | OperationUnsupported.CenFullLevel | CEN full level does not support vpn bgp. | The error message returned because CEN instances in FULL mode do not support BGP for VPN gateways. | diagnosis |
| 400 | OperationUnsupported.CloudBoxVbrNotSupport | Cloud Box Vbr does not support. | The error message returned because the instance cannot be connected to a CloudBox. | diagnosis |
| 400 | OperationUnsupported.CloudBoxVpc | The specified CloudBoxVpc does not support the operation. | The error message returned because the CloudBox VPC does not support this operation. | diagnosis |
| 400 | OperationUnsupported.CloudBoxVswNotSupport | Cloud Box vsw does not support. | The error message returned because the instance cannot be connected to the CloudBox vSwitch. | diagnosis |
| 400 | OperationUnsupported.CloudDataTransferService | CCN region not support cloud data transfer service. | The error message returned because the Cloud Data Transfer (CDT) service is not supported in the region of the CCN instance. | diagnosis |
| 400 | OperationUnsupported.ConnectAttachment | This region not support connect attachment. | The error message returned because attachments are not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.CrossRegionNotSupport | Operation Failed. Host region Id is not equal to access region Id, VPC or VBR not support cross region privatezone service. | The host region ID is different from the service region ID. The VPC or VBR does not support PrivateZone across regions. | diagnosis |
| 400 | OperationUnsupported.CurrentCenNotSupportUpgradeToTr | Basic Edition TR with cross-region connections cannot be upgraded to Enterprise Edition TR for internal accounts. | Basic Edition TR with cross-region connections cannot be upgraded to Enterprise Edition TR for internal accounts. | diagnosis |
| 400 | OperationUnsupported.CurrentRegionOrAzNotSupportCenTr | Operation failed because current region or az not support transit router. | The error message returned because Enterprise Edition transit routers are not supported in the specified region and the upgrade failed. | diagnosis |
| 400 | OperationUnsupported.DisablePropagation | The specified attachment or routeTable is not supported by this operation. | The error message returned because this operation is not supported by the specified attachment or route table. | diagnosis |
| 400 | OperationUnsupported.dissociateRouteTable | The specified attachment or routeTable is not supported by this operation. | The error message returned because this operation is not supported by the specified attachment or route table. | diagnosis |
| 400 | OperationUnsupported.DstPortRange | Current TR version does not support setting destination port range. | Current TR version does not support setting destination port range. | diagnosis |
| 400 | OperationUnsupported.ECRAttachment | ECR Attachment is not supported. | ECR Attachment is not supported. | diagnosis |
| 400 | OperationUnsupported.EnablePropagation | The specified attachment or routeTable is not supported by this operation. | The error message returned because this operation is not supported by the specified attachment or route table. | diagnosis |
| 400 | OperationUnsupported.ExistsIgmpv2MemberOnEni | An igmpv2 multicast source or multicast member already exists on the ENI. | An igmpv2 multicast source or multicast member already exists on the ENI. | diagnosis |
| 400 | OperationUnsupported.Igmpv2Support | The current UID does not allow the creation of a igmpv2 multicast domain. Please submit a ticket. | The current UID does not allow the creation of a multicast domain of the igmpv2 type. Please submit a ticket. | diagnosis |
| 400 | OperationUnsupported.IPv6Cidr | The traffic marking policy for current TR type does not support IPv6 CIDR. | The flow classification rules in the flow marking policy of the basic version forwarding router do not support IPv6 network segments. | diagnosis |
| 400 | OperationUnsupported.ModifyDeploymentSets | The operation is invalid, because modifying the deployment set is not supported. | The operation is invalid, because modifying the deployment set is not supported. | diagnosis |
| 400 | OperationUnsupported.ModifyTransitRouteTableAggregation | ModifyTransitRouteTableAggregation is unsupported. | ModifyTransitRouteTableAggregation is unsupported. | diagnosis |
| 400 | OperationUnsupported.NotAllowedDeleteIgmpv2Member | You cannot delete a multicast source or multicast member of the igmpv2 type. | You cannot delete a multicast source or member of the igmpv2 type. | diagnosis |
| 400 | OperationUnsupported.NotAllowedDisableIgmpv2Support | The operation is not permitted because Igmpv2Support is not currently available to be disabled. | The operation is not permitted because Igmpv2Support is not currently available to be disabled. | diagnosis |
| 400 | OperationUnsupported.QosPolicyForLowLatencyLinkType | QoS Policy is not supported for Low Latency LinkType. | QoS Policy is not supported for Low Latency LinkType. | diagnosis |
| 400 | OperationUnsupported.RegionId | The specified Region ID does not support the operation. | The specified Region ID does not support the operation. | diagnosis |
| 400 | OperationUnsupported.RegionId | The specified region ID is not supported. | The specified region ID is not supported. | diagnosis |
| 400 | OperationUnsupported.RegionId | The specified Region is not supported. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.RegionId | The specified RegionId does not support the operation. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.ResourceExistInEcrRegion | Upgrade Transit Router in current ECR instance region is unsupported. | The ECR instance has sub-resources in the current region and cannot be added to the TR to be upgraded. | diagnosis |
| 400 | OperationUnsupported.RouteTablePropagationEnabled | Connect attachment not support RouteTablePropagationEnabled. | The error message returned because the connect attachment does not support route learning. | diagnosis |
| 400 | OperationUnsupported.ServiceMode | The specified TransitRouter does not support the operation. | The error message returned because the transit router mode does not support this operation. | diagnosis |
| 400 | OperationUnsupported.ServiceMode | The operation is not supported because of the wrong transitRouter service mode. | The error message returned because the transit router mode does not support this operation. | diagnosis |
| 400 | OperationUnsupported.ServiceMode | The specified ServiceMode does not support the operation. | The error message returned because the transit router mode does not support this operation. | diagnosis |
| 400 | OperationUnsupported.SrcPortRange | Current TR version does not support setting source port range. | Current TR version does not support setting source port range | diagnosis |
| 400 | OperationUnsupported.SupportMulticast | The multicast is not supported in the specified region. | The error message returned because multicast is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.Tag | The Tag is not supported in the specified region. | The error message returned because transit routers in the current region do not support tags. | diagnosis |
| 400 | OperationUnsupported.TrafficQosPolicyExist | Operation unsupported because traffic qos policy exists. | The error message returned because the specified QoS policy already exists. | diagnosis |
| 400 | OperationUnsupported.TransitAttachment | The specified TransitAttachment does not support the operation. | The error message returned because this operation is not supported by the specified transit router attachment (TransitAttachment). | diagnosis |
| 400 | OperationUnsupported.TransitRegionMappings | The specified TransitRegionMappings does not support the operation. | The specified TransitRegionMappings does not support the operation. | diagnosis |
| 400 | OperationUnsupported.TransitRegionMappings | When both OriginalRegionId are CCN regions, you must specify TransitRegionId. | When both OriginalRegionId are CCN regions, you must specify TransitRegionId. | diagnosis |
| 400 | OperationUnsupported.TransitRouterAttachment | The specified TransitRouterAttachment has configured TransitRegion. Please remove the configuration first. | The error message returned because bandwidth multiplexing is enabled. Disable bandwidth multiplexing and try again. | diagnosis |
| 400 | OperationUnsupported.TransitRouterCidr | Transit region does not support the operation. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.TransitRouterCidrList | The TransitRouterCidrList is not support in the specified Region. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.TransitRouterId | TransitRouterId is unsupported. | The error message returned because Basic Edition transit routers do not support the operation. | diagnosis |
| 400 | OperationUnsupported.TransitRouterStatus | The specified TransitRouterStatus does not support the operation. | The specified TransitRouterStatus does not support the operation. | diagnosis |
| 400 | OperationUnsupported.TransitRouterType | The specified TransitRouterType does not support the operation. | The error message returned because this operation is not supported by the specified type of transit router. | diagnosis |
| 400 | OperationUnsupported.TransitRouterType | The operation is not supported because of the wrong transitRouter type. | The error message returned because this operation is not supported by the specified type of transit router. | diagnosis |
| 400 | OperationUnsupported.VbrAttachment | This region not support vbr attachment. | The error message returned because VBR attachments are not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.VcoTunnelNotMatchZoneParam | The tunnel type of the entered Vco does not match the Zone parameter. | The tunnel type of the entered Vco does not match the Zone parameter. | diagnosis |
| 400 | OperationUnsupported.VpcRegion | The specified Region is not support for this operation. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | OperationUnsupported.VpcRoutePropagationSource | The operation on this VPC route propagation source is not supported. | The operation on this VPC route propagation source is not supported. | diagnosis |
| 400 | OperationUnsupported.VpnAttachment | The specified region does not support the operation. | The error message returned because this operation is not supported in the specified region. | diagnosis |
| 400 | Order.AccountStatusIllegal | Illegal account status for postpay service not opened for this account. | Illegal account status for postpay service not opened for this account. | diagnosis |
| 400 | Order.Opened | 您已开通本服务，请前往控制台使用。 | The error message returned because the service has been activated. You can log on to the console to manage it. | diagnosis |
| 400 | OverLappingExist.Cidr | The cidr overlapping exist. | The error message returned because CIDR overlapping is already enabled. | diagnosis |
| 400 | ParameterError | The parameter is error. | The error message returned because a parameter is invalid. | diagnosis |
| 400 | ParameterIllegal | The parameter is illegal. | The error message returned because a parameter is set to an invalid value. | diagnosis |
| 400 | ParameterIllegal.AccessRegionId | Parameter Access RegionId illegal. | The error message returned because the specified access region ID (AccessRegionId) is invalid. | diagnosis |
| 400 | ParameterIllegal.AccessRegionIdNoCCN | Parameter Access RegionId illegal. | The error message returned because the specified access region ID (AccessRegionId) is invalid. | diagnosis |
| 400 | ParameterIllegal.AccessRegionIdNoCCN | Parameter Access RegionId is illegal. | AccessRegionId is set to an invalid value. | diagnosis |
| 400 | ParameterIllegal.BandwidthPackage | The parameter of bandwidth packaged is illegal. | The error message returned because the specified bandwidth plan (BandwidthPackage) is invalid. | diagnosis |
| 400 | ParameterIllegal.BandwidthPackageDefaultLinkTypeOnlySupportGold | Cen bandwidthPackage only support Gold. | Cen bandwidthPackage only support Gold. | diagnosis |
| 400 | ParameterIllegal.BwpSpec | The parameter of bandwidth package specification is illegal. | The error message returned because the specified bandwidth plan specification is invalid. | diagnosis |
| 400 | ParameterIllegal.CdtDefaultLinkTypeOnlySupportGold | CDT only support Gold when both transitrouters for cross regional connections are not all enterprise version. | CDT only support Gold when both transitrouters for cross regional connections are not all enterprise version. | diagnosis |
| 400 | ParameterIllegal.CdtDefaultLinkTypeOnlySupportPlatinumOrGold | DataTransfer only support Platinum and Gold. | DataTransfer only support Platinum and Gold. | diagnosis |
| 400 | ParameterIllegal.CdtDefaultLinkTypeOnlySupportUnderlaySilver | CDT only support UnderlaySilver when both transitrouters for cross regional connections are not all enterprise version. | CDT only support UnderlaySilver when both transitrouters for cross regional connections are not all enterprise version. | diagnosis |
| 400 | ParameterIllegal.CloudRouteHost | Parameter Host is not valid. | The error message returned because the specified cloud route host (CloudRouteHost) is invalid. | diagnosis |
| 400 | ParameterIllegal.ClouteRouteCidrNotAllow | Parameter Host not in 100.64.0.0/10 | The error message returned because the specified cloud service CIDR block is invalid. | diagnosis |
| 400 | ParameterIllegal.ClouteRouteNotSupportIpv6 | Parameter Host not support IPv6 | The error message returned because the specified cloud service routes do not support IPv6. | diagnosis |
| 400 | ParameterIllegal.DefaultLinkTypeOnlySupportUnderlaySilver | Cen bandwidthPackage only support UnderlaySilver. | When the bandwidth allocation method is bandwidth package, the default link type supports only silver (UnderlaySilver) | diagnosis |
| 400 | ParameterIllegal.Host | Parameter Host does not support domain. | The error message returned because the specified host is invalid. | diagnosis |
| 400 | ParameterIllegal.Host | The Parameter Host does not support domain. | The Host parameter does not support domains. | diagnosis |
| 400 | ParameterIllegal.Ipv6CloudRouteCidrNotAllow | Parameter Host not in valid ipv6 cidr. | The error message returned because the specified cloud service routes do not support IPv6. | diagnosis |
| 404 | ParameterRegion | The specified region does not exist. | The error message returned because the specified region does not exist. | diagnosis |
| 400 | ParamExclusive.BandwidthTypeAndCenBandwidthPackageId | DataTransfer and CenBandwidthPackageId is mutually exclusive. | When the value of bandwidthType is DataTransfer, the CenBandwidthPackageId field cannot be set. | diagnosis |
| 400 | ParamExclusive.BasicAndMultiPrimary | Basic and MultiPrimary is mutually exclusive. | The error message returned because Basic Edition transit routers do not support the MultiPrimary mode. | diagnosis |
| 400 | ParamExclusive.BasicAndPrimaryStandby | Basic and PrimaryStandby is mutually exclusive. | The error message returned because Basic Edition transit routers do not support the PrimaryStandby mode. | diagnosis |
| 400 | ParamExclusive.NextHopTypeBlackHoleAndNextHopId | TransitRouterRouteEntryNextHopType(BlackHole) and TransitRouterRouteEntryNextHopId is mutually exclusive. | If you set Blackhole Route to Yes, do not specify a next hop. | diagnosis |
| 400 | ParamExclusive.ResetAndMinimumTransitRouterCapacity | ResetCapacityReservation and MinimumTransitRouterCapacity is mutually exclusive. | ResetCapacityReservation and MinimumTransitRouterCapacity is mutually exclusive. | diagnosis |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId must be mutually exclusive with either TransitRouterRouteTableId or DestCidrBlock. | The error message returned because the ID of the route in the route table of the transit router conflicts with the ID of the route table and the destination CIDR block. | diagnosis |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId must be mutually exclusive with either RouteTableId or DestCidrBlock. | The error message returned because the ID of the route conflicts with the ID of the route table and the destination CIDR block. | diagnosis |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and TransitRouterRouteTableIdOrDestCidrBlock is mutually exclusive. | The error message returned because the RouteEntryId, TransitRouterRouteTableId, or DestCidrBlock parameter conflicts with each other. | diagnosis |
| 400 | ParamExclusive.RouteEntryIdsAndStatus | TransitRouterRouteEntryIds and TransitRouterRouteEntryStatus are mutually exclusive. | The error message returned because the ID of the route configured for the transit router conflicts with the status of the route. | diagnosis |
| 400 | ParamExclusive.RouteEntryIdsAndStatus | TransitRouterRouteEntryIds and TransitRouterRouteEntryStatus is mutually exclusive. | The error message returned because the TransitRouterRouteEntryIds and TransitRouterRouteEntryStatus parameters conflict with each other. | diagnosis |
| 400 | ParamExclusive.ServiceModeAndSupportMulticast | ServiceMode and SupportMulticast is mutually exclusive. | The error message returned because transit routers in the current mode do not support multicast. | diagnosis |
| 400 | ParamExclusive.ServiceModeAndTransitRouterCidrList | ServiceMode and TransitRouterCidrList is mutually exclusive. | The error message returned because transit routers in the current mode do not support CIDR blocks. | diagnosis |
| 400 | ParamExclusive.TransitRouterRouteEntryTypeAndOtherParam | Other filter parameters cannot be specified when TransitRouterRouteEntryType is set to Static. | The error message returned because no other filter conditions can be specified when TransitRouterRouteEntryType is set to Static. | diagnosis |
| 400 | ParamExclusive.TransitRouterVPCAttachmentOptionsAndOptions | When creating or modifying a VPC attachment, the input parameter TransitRouterVPCAttachmentOptions and Options cannot be used at the same time. | When creating or modifying a VPC attachment, the input parameter TransitRouterVPCAttachmentOptions and Options cannot be used at the same time. | diagnosis |
| 400 | PayFor.AccountMoneyValidateError | 账号可用金额不足. | The error message returned because your Alibaba Cloud account does not have a sufficient balance. | diagnosis |
| 500 | PayFor.AccountMoneyValidateError | Your channel merchant quota is insufficient. Please contact the channel merchant. | Your channel partner does not have sufficient quotas. Contact your channel partner. | diagnosis |
| 400 | PayFor.CreditPayInsufficientBalance | 额度不足,请联系您的渠道合作伙伴提升额度。 | The error message returned because your Alibaba Cloud account does not have a sufficient balance. Contact your channel partner to top up your account balance. | diagnosis |
| 400 | ProjectExist | Project already exist, please try a different project name. | The log Project already exists, try a different Project name. | diagnosis |
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | The error message returned because the specified project or Logstore does not exist. | diagnosis |
| 400 | QuotaExceeded | The quota of resource is full. | The error message returned because the number of resources has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.AggregationRoute | The aggregation route count is over limit. | The error message returned because the number of aggregated routes has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.Bandwidth | Bandwidth quota exceeded. | Bandwidth quota exceeded. | diagnosis |
| 400 | QuotaExceeded.CenQuotaEcrAttachPerTransitRouter | The maximum number of ECR attachment per Transit Router is exceeded. | The maximum number of ECR attachment per Transit Router is exceeded. | diagnosis |
| 400 | QuotaExceeded.CenQuotaVbrAttachPerTransitRouter | The maximum number of VBR attachment per Transit Router is exceeded. | The error message returned because specified number of VBRs to be attache to the transit router exceeds the upper limit. You can submit a ticket to request a quota increase. | diagnosis |
| 400 | QuotaExceeded.CenQuotaVpcAttachPerTransitRouter | The maximum number of VPC attachment per Transit Router is exceeded. | The error message returned because the specified number of VPCs to be attache to the transit router exceeds the upper limit. | diagnosis |
| 400 | QuotaExceeded.CenQuotaVpnAttachPerTransitRouter | The maximum number of VPN attachment per Transit Router is exceeded. | The error message returned because specified number of VPN attachments to the transit router exceeds the upper limit. You can submit a ticket to request a quota increase. | diagnosis |
| 400 | QuotaExceeded.FlowlogCount | The maximum number of flow log instances is exceeded. | The maximum number of flow log instances is exceeded. | diagnosis |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | The error message returned because the number of flow logs has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.MulticastDomain | The MulticastDomain quota is exceeded. | The error message returned because the number of multicast domains has reached the upper limit. You cannot add more multicast domains. | diagnosis |
| 400 | QuotaExceeded.SourceAndMemberPerTransitRouter | The number of multicast group members and sources has exceed the maximum value that can be created. | The number of multicast group members and sources has exceed the maximum value that can be created. | diagnosis |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | The error message returned because the number of tags has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.TrafficMatchRule | The maximum number of TrafficMatchRule per Transit Router is exceeded. | The number of flow classification rules supported by each forwarding router instance exceeds the limit. You can submit a work order to increase the quota. | diagnosis |
| 400 | QuotaExceeded.TransitRouterConnectPeer | Transit Router connect peer quota exceeded. | Create Connect Peer quota exceeded. | diagnosis |
| 400 | QuotaExceeded.TransitRouterRoutEntry | The TransitRouterRoutEntry quota is exceeded. | The error message returned because the number of routes configured for the transit router has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.TransitRouterRoutEntry | TransitRouterRoutEntry quota exceeded. | The error message returned because the number of routes has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.TransitRouterRoutTable | TransitRouterRoutTable quota exceeded. | The error message returned because the number of route tables has reached the upper limit. | diagnosis |
| 400 | QuotaExceeded.VpcAutoRoutesPublishPerTransitRouter | The number of VPCs that have route synchronization enabled has reached the upper limit. | The error message returned because the number of VPCs that have route synchronization enabled has reached the upper limit. | diagnosis |
| 400 | QuotaFull.ChildInstanceRelatedCen | The childinstance has exceed the quota of the times that a childinstance can be attached as an attachment. | The error message returned because the number of CEN instances to which the instance is attached has reached the upper limit. You cannot attach the instance to more CEN instances. | diagnosis |
| 400 | QuotaFull.MulticastDomainPerVpc | The number of multicast domain that vpc associated has exceed the maximum value that can be associated. | The number of multicast domain that vpc associated has exceed the maximum value that can be associated. | diagnosis |
| 400 | QuotaFull.MulticastGroupPerDomain | The number of multicast group has exceed the maximum value that can be created. | The error message returned because the number of multicast groups in the multicast domain has reached the upper limit. | diagnosis |
| 400 | QuotaFull.MulticastMemberPerGroup | The number of multicast group member has exceed the maximum value that can be created. | The error message returned because the number of multicast members in the multicast group has reached the upper limit. | diagnosis |
| 400 | QuotaFull.MulticastPeerMemberPerGroup | The number of multicast group member peer domain has exceed the maximum value that can be created. | The error message returned because the number of multicast members from another region in the multicast group has reached the upper limit. | diagnosis |
| 400 | QuotaFull.MulticastSourcePerGroup | The number of multicast group source has exceed the maximum value that can be created. | The error message returned because the number of multicast sources in the multicast group has reached the upper limit. | diagnosis |
| 400 | QuotaFull.VswitchPerMulticastDomain | The number of vswitch associated with multicast domain has exceed the maximum value that can be created. | The error message returned because the number of vSwitches associated with the multicast domain has reached the upper limit. | diagnosis |
| 400 | QuotaReached.Route | The quota of the route table is not enough for the request prefix list. | The error message returned because the number of routes has reached the upper limit. | diagnosis |
| 404 | Region.NotFound | The region has not found | The error message returned because the specified region does not exist. | diagnosis |
| 400 | RegionNotSupport.Prefixlist | Prefixlist association are not supported in this region. | The error message returned because the feature is not supported in the specified region. | diagnosis |
| 400 | ResourceConflict.Route | Some of the prefixes of the prefix list are conflicted with exsited routes. | The error message returned because the specified prefix list conflicts with an existing route. | diagnosis |
| 400 | ResourceExisted.PrefixlistAssociation | The prefix list has been already associated with this route table. | The error message returned because the specified prefix list is already associated with a route table. | diagnosis |
| 400 | ResourceMismatch.Nexthop | The specified nexthop and nexthop type mismatched. | The error message returned because the specified next hop or next hop type is invalid. | diagnosis |
| 400 | ResourceNotFound | The resource does not found. | The resource does not found. | diagnosis |
| 400 | ResourceNotFound.Nexthop | The specified nexthop instance is not exsit. | The error message returned because the specified next hop does not exist. | diagnosis |
| 400 | ResourceNotFound.PrefixList | The specified prefixlist does not found. | The error message returned because the specified prefix list does not exist. | diagnosis |
| 400 | ResourceNotFound.PrefixlistAssociation | The prefix list is not associated with this route table. | The error message returned because the specified prefix list is not associated with a route table. | diagnosis |
| 400 | ResourceNotFound.PrefixlistCidrs | Can not find any cidr of specified prefix list. | The error message returned because the specified prefix list does not contain a CIDR block. | diagnosis |
| 400 | ResourceNotFound.TransitRouterAttachment | The specified TransitRouterAttachment does not found. | The error message returned because the specified transit router attachment (TransitRouterAttachment) does not exist. | diagnosis |
| 400 | ResourceNotSupport.CCN | CCN not support prefix list. | The error message returned because prefix lists are not supported by CCN instances. | diagnosis |
| 400 | ResourceNotSupport.Nexthop | The specified nexthop instance type is not support for the operation. | The error message returned because this operation is not supported by the specified next hop. | diagnosis |
| 400 | Risk.RiskControlRejection | 为保护您的账户安全，下单被中止，详情请联系客服。 | The error message returned because the order is suspended due to security concerns. Contact customer service for details. | diagnosis |
| 400 | RouteConflict | The specified route already exists. | The specified route already exists. | diagnosis |
| 400 | RouteConflict | The route has conflict with other route. | The error message returned because two or more routes conflict with each other. | diagnosis |
| 400 | RuleExist | The specified rule already exists. | The specified rule already exists. | diagnosis |
| 400 | RuleExist | The rule has already existed. | The rule already exists. | diagnosis |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | The maximum number of tags is exceeded. | diagnosis |
| 400 | SourceProjectNotExist | The specified source project or Logstore does not exist. | The specified source project or Logstore does not exist. | diagnosis |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | The error message returned because the specified source project or Logstore does not exist. | diagnosis |
| 400 | SystemBusy | The system is busy. Please try again later. | The error message returned because the system is unavailable. Try again later. | diagnosis |
| 400 | Throttling | Request was denied due to request throttling. | The error message returned because this operation is performed at a high frequency. Try again later. | diagnosis |
| 400 | Throttling.User | Request was denied due to user flow control. | The error message returned because traffic throttling is triggered. Try again later. | diagnosis |
| 400 | TransitRouterRouteEntryNextHopId.NotFound | TransitRouterRouteEntryNextHopId is not found. | The error message returned because the specified next hop ID of the transit router does not exist. | diagnosis |
| 400 | Unauthorized | The AccessKeyId is unauthorized. | The error message returned because you do not have the permissions to perform this operation. | diagnosis |