Queries the monitoring data of back-to-origin traffic for one or more specified accelerated domains. The data is collected every minute.
Operation description
- You can call this operation up to 10 times per second per account.
- If you do not specify the StartTime or EndTime parameter, the request returns the data collected in the last hour by default. If you specify both the StartTime and EndTime parameters, the request returns the data collected within the specified time range.
Time granularity
The time granularity varies with the time range specified by the StartTime and EndTime parameters. The following table describes the time period within which historical data is available and the data delay.
Time granularity | Maximum time range per query | Historical data available | Data delay |
---|---|---|---|
1 minute | 1 hour | 7 days | 5 minutes |
5 minutes | 3 days | 93 days | 15 minutes |
1 hour | 31 days | 186 days | 4 hours |
Debugging
Authorization information
Request parameters
Parameter | Type | Required | Description | Example |
---|---|---|---|---|
DomainName | string | Yes | The accelerated domain name. You can specify up to 100 domain names in each call. Separate multiple domain names with commas (,). | example.com |
StartTime | string | No | The start of the time range to query. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. | 2019-12-10T20:00:00Z |
EndTime | string | No | The end of the time range to query. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. Note
The end time must be later than the start time.
| 2019-12-10T20:01:00Z |
Response parameters
Examples
Sample success responses
JSON
format
{
"EndTime": "2019-12-10T20:01:00Z",
"StartTime": "2019-12-10T20:00:00Z",
"RequestId": "A666D44F-19D6-490E-97CF-1A64AB962C57",
"DomainName": "example.com",
"DataInterval": "60",
"RealTimeSrcTrafficDataPerInterval": {
"DataModule": [
{
"Value": "0",
"TimeStamp": "2019-12-10T20:01:00Z"
}
]
}
}
Error codes
HTTP status code | Error code | Error message | Description |
---|---|---|---|
400 | MissingParameter | StartTime and EndTime can not be single. | You must specify both the start time and end time. |
400 | InvalidStartTime.Malformed | The specified value of parameter StartTime is malformed. | The specified start time is invalid. For more information, see the help documentation of this operation. |
400 | InvalidEndTime.Malformed | The specified value of parameter EndTime is malformed. | The specified EndTime parameter is invalid. |
400 | InvalidEndTime.Mismatch | Specified EndTime does not match the specified StartTime. | StartTime must be earlier than EndTime. |
400 | InvalidStartTime.ValueNotSupported | The specified value of parameter StartTime is not supported. | The start time is invalid. Set this parameter to another value and try again. |
400 | InvalidDomainName.Overlimit | Too many DomainNames are specified. | The number of specified domain names exceeds the limit of the operation. |
400 | InvalidInterval.Malformed | Specified Interval is malformed. | The format of the time granularity is invalid. |
For a list of error codes, visit the Service error codes.
Change history
Change time | Summary of changes | Operation |
---|---|---|
2023-06-13 | The Error code has changed | View Change Details |