All Products
Search
Document Center

Database Backup:Back up a self-managed database in a data center connected to Alibaba Cloud over Express Connect to OSS or DBS

Last Updated:Jan 13, 2023

Database Backup (DBS) allows you to back up self-managed databases in data centers that are connected to Alibaba Cloud over Express Connect to Object Storage Service (OSS) or DBS. This topic describes how to back up a self-managed MySQL database deployed in a data center that is connected to Alibaba Cloud over Express Connect to OSS or DBS.

Terms

Express Connect: an Alibaba Cloud service that helps you build private network communication channels between virtual private clouds (VPCs) or between VPCs and data centers. This service provides better flexibility for your network topology and enhances the performance and security of cross-network communication.

VPC: an Alibaba Cloud service that allows you to create private networks on Alibaba Cloud. VPCs are logically isolated from each other. You can create and manage your cloud service instances in VPCs, such as Elastic Compute Service (ECS) instances, ApsaraDB instances, and Server Load Balancer (SLB) instances.

VBR: a virtual border router (VBR) that is deployed between the customer-premises equipment (CPE) in a data center and a VPC. The VBR helps you exchange data between the VPC and data center. Similar to VPC routers, each VBR manages a route table. You can add routes to the route table of a VBR to control network traffic forwarding. For more information, see What is a VBR?

vRouter: a hub that connects vSwitches in a VPC, and a gateway that connects the VPC and other networks.

Prerequisites

  • A DBS backup schedule is created. For more information, see Purchase a backup schedule.

  • The data center in which a self-managed database is deployed is connected to a VPC on Alibaba Cloud by using an Express Connect circuit. For more information, see Connect a data center to a VPC by using an Express Connect circuit.

  • A static route is added on a machine in the data center to route traffic to a CIDR block of DBS servers. You can run the following command to add a static route: ip route CIDR block of DBS servers {IP address of a VBR at the Alibaba Cloud side}. For more information about the CIDR blocks of DBS servers, see the CIDR blocks of DBS servers section of this topic. Example:

    If the CIDR block of DBS servers is 100.104.52.0/24 and the IP address of the VBR at the Alibaba Cloud side is 10.100.0.1, run the following command to add a static route: ip route 100.104.52.0/24 10.100.0.1.

Configure a backup schedule

  1. Log on to the DBS console. In the left-side navigation pane, click Backup Schedules. In the upper-left corner of the Backup Schedules page, select the region in which your backup schedule resides.

  2. On the Backup Schedules page, find the backup schedule that you want to configure and click Configure Backup Schedule in the Actions column.

  3. In the Configure Backup Source and Destination step of the Configure Backup Schedule wizard, configure the parameters in the Backup Source Information and Backup Destination Information sections. In the lower-right corner of the page, click Next.

    Section

    Parameter

    Description

    N/A

    Schedule Name

    The name of the backup schedule. DBS automatically generates a backup schedule name. We recommend that you set a descriptive name that is easy to identify. Backup schedule names do not need to be unique.

    Backup Source Information

    Backup Mode

    The method that is used to back up data. By default, the backup method that you selected when you purchased the backup schedule is used. In this example, logical backups for a MySQL database are configured.

    Database Location

    The location of the database. Select Express Connect DB/VPN Gateway/Intelligent Gateway.

    Database Type

    The type of the database that you want to back up. By default, the database type that you selected when you purchased the backup schedule is used. In this example, this parameter is set to MySQL.

    Peer VPC

    The VPC to which the self-managed database is connected. Select a created VPC.

    Address

    The connection address of the self-managed database.

    Port Number

    The port number of the self-managed MySQL database. Default value: 3306.

    Database Account

    The username of the account that is used to connect to the self-managed database. The account must have specific permissions to back up the database. For more information, see Account permissions.

    Password

    The password of the account that is used to connect to the self-managed database.

    After you enter the username and password of the database account, click Test Connection next to the password to check whether the information about the database that you want to back up is valid. If the specified parameters are valid, the "Test Passed" message appears. If the "Test Failed" message appears, click Check next to Test Failed. Modify the information about the database that you want to back up based on the check results.

    Backup Destination Information

    Backup Storage Type

    The type of storage that is used to store the backup data. Valid values:

    • DBS Storage (recommended): Backup data is stored in DBS without requiring you to create storage space. You are charged based on the volume of your data that is stored in DBS. For more information about the billing method, see Storage fees.

      To reduce storage costs, we recommend that you use subscription storage plans. For more information, see Use storage plans.

    • OSS For User: You must create a bucket in OSS in advance. For more information, see Create buckets.

      Note

      In this example, DBS Storage (recommended) is selected. If you select OSS For User, you must configure the OSS Bucket Name parameter, and only the OSS Standard storage class is supported.

    Storage Encryption

    The method that is used to encrypt the stored data. Valid values:

    • Encrypted: recommended. DBS uses AES-256 to encrypt the stored data.

      The server-side encryption feature is used in OSS. When you upload an object to a bucket for which server-side encryption is enabled, OSS encrypts and stores the object. When you download the encrypted object from OSS, OSS decrypts the object and returns the decrypted object to you. For more information, see Server-side encryption.

    • Non-encrypted: The stored data is not encrypted.

  4. In the Edit Backup Objects step, find the database or table that you want to back up in the Available section. Click the right arrow to add the selected database or table to the Selected section. Then, click Next.

    Note
    • Logical Backup: DBS allows you to back up a single table, a single database, multiple databases, or an entire database instance. You can click Select All in the lower-left corner of the page to select all databases. The database objects that can be backed up vary based on the database type. For more information, see Database engines and features. By default, a backup schedule cannot be used to back up a database that is created after the backup schedule is created. To back up the database, you can add the database to the backup schedule when you configure the backup schedule. For more information, see Modify backup objects.

    • Physical Backup: You must back up an entire database instance.

  5. In the Configure Backup Time step, configure the parameters that are described in the following table and click Next.

    Parameter

    Description

    Full-scale Backup Frequency

    The frequency of the backup schedule. Valid values: Periodic Backup and Single Backup.

    Note

    In scenarios where incremental data needs to be restored, we recommend that you select Periodic Backup and perform a full backup at least once a week. Otherwise, a large number of binary logs must be replayed during restoration. This process is prone to errors and may result in a prolonged recovery time objective (RTO).

    Full Data Backup Recurrence

    This parameter is required if you set the Full-scale Backup Frequency parameter to Periodic Backup. You can select the days of the week on which DBS runs the backup schedule. Select at least one day of the week.

    Start At

    This parameter is required if you set the Full-scale Backup Frequency parameter to Periodic Backup. We recommend that you set a point in time within off-peak hours. Example: 01:00.

    Note

    If a previous full data backup is not complete at the start time of the next backup, DBS skips the next backup.

    Incremental Backup

    Specifies whether to enable incremental backup. If you enable incremental backup, make sure that the binary logging feature is enabled for the database that you want to back up.

    Note
    • By default, the binary logging feature is enabled for an ApsaraDB RDS for MySQL instance. If you use a self-managed database, you must manually enable the binary logging feature.

    • This parameter is displayed only if you set the Full-scale Backup Frequency parameter to Periodic Backup.

    Maximum Concurrent Threads for Full Data Backup

    The maximum number of concurrent threads that are available for a full backup. You can configure this parameter to adjust the backup speed. For example, you can reduce the number of backup threads to minimize impacts on the database.

    The maximum number of actual concurrent threads varies based on backup schedule specifications. For more information, see How do I change the maximum backup speed?

    Backup network speed limit

    The limit on the network bandwidth. Unit: Mbit/s. You can set the limit based on your business requirements. Default value: 0, which indicates that the network bandwidth is not limited.

    Note

    This parameter is displayed only if you set the Database Type parameter to MySQL.

  6. In the Edit Lifecycle step, configure the lifecycle for full backup data.

    Note

    If you set the Incremental Backup parameter to Enable in Step 5, you must configure the lifecycle for incremental backup data.

  7. After the configurations are complete, click Precheck in the lower-right corner of the page.

  8. If the Precheck Passed message appears, click Start Task.

    Note

    When the state of the backup schedule changes to Running, the backup schedule takes effect.

    After data is backed up, you can view the backup schedule or restore the backup data. For more information, see View a backup schedule and Restore a database.

CIDR blocks of DBS servers

In the preceding configurations, the CIDR block of DBS servers that is used resides in the region where the data center is connected to a VPC on Alibaba Cloud by using an Express Connect circuit. The following table describes the CIDR blocks of DBS servers that are supported in various regions for connections to VPCs over Express Connect.

Region

CIDR block of DBS servers

China (Hangzhou)

100.104.217.0/24

China (Beijing)

100.104.119.0/24

China (Qingdao)

100.104.183.0/24

China (Shanghai)

100.104.191.0/24

China (Shenzhen)

100.104.81.0/24

China (Chengdu)

100.104.133.128/26

China (Ulanqab)

100.104.76.192/26

China (Heyuan)

100.104.127.0/26

South Korea (Seoul)

100.104.150.192/26

Thailand (Bangkok)

100.104.119.128/26

India (Mumbai)

100.104.88.64/26

China (Hong Kong)

100.104.10.0/24

Singapore

100.104.10.0/24

Japan (Tokyo)

100.104.144.0/24

China (Hohhot)

100.104.40.0/24

China (Zhangjiakou)

100.104.48.0/24

US (Virginia)

100.104.220.0/24

US (Silicon Valley)

100.104.17.0/24

Australia (Sydney)

100.104.234.0/24

Germany (Frankfurt)

100.104.133.0/24

Malaysia (Kuala Lumpur)

100.104.10.0/24

Indonesia (Jakarta)

100.104.209.0/24