ACK Serverless, Dikey Pod Otomatik Ölçekleyici (VPA) kullanarak dikey pod otomatik ölçeklendirme özelliği sunar. VPA'yı bir ACK serverless cluster üzerinde dağıtıp yükledikten sonra, kaynak kullanımına göre pod'lar için kaynak sınırlarını otomatik olarak ayarlar. Bu sayede küme, yeterli kaynağa sahip düğümlerde pod'ları zamanlayabilir. VPA ayrıca orijinal konteyner tanımındaki kaynak talepleri ile sınırları arasındaki oranı korur. Bu konuda, dikey pod otomatik ölçeklendirmeyi uygulamak için bir YAML dosyasının nasıl kullanılacağı açıklanmaktadır.
Ön koşullar
Aşağıdaki ön koşulların karşılandığından emin olun:
1.12 veya sonraki bir sürüme sahip bir Kubernetes kümesi oluşturun. Daha fazla bilgi için bkz. ACK serverless cluster oluşturma.
Komut satırı arayüzünü kullanarak kümeye bağlanın. Daha fazla bilgi için bkz. Kümenin kubeconfig dosyasını alma ve kubectl kullanarak kümeye bağlanma.
Kümedeki mevcut tüm VPA dağıtımlarını kaldırın. Bu işlem, yeni VPA kurulumuyla çakışmaları ve VPA'nın kullanılamaz hale gelmesini önler.
Arka plan bilgileri
Dikey pod otomatik ölçeklendirme özelliği deneysel niteliktedir. Dikkatli kullanın.
Çalışan bir pod'un kaynak yapılandırmasını güncellemek, VPA'nın deneysel bir özelliğidir. Bu işlem pod'u yeniden oluşturup yeniden başlatır; pod farklı bir düğüme zamanlanabilir.
VPA, bir ReplicationController tarafından yönetilmeyen pod'ları tahsis etmez. Bu tür pod'lar için Auto modu, Initial moduna eşdeğerdir.
Şu anda VPA, CPU ve bellek ölçümlerini izleyen bir Yatay Pod Otomatik Ölçekleyici (HPA) ile aynı anda çalışamaz. Tek istisna, HPA'nın yalnızca diğer özel veya harici ölçümleri izlemesi durumudur.
VPA, kabul kontrolü için bir kabul web kancası (admission webhook) kullanır. Kümede başka kabul web kancaları varsa, bunların VPA web kancasıyla çakışmadığından emin olun. Kabul denetleyicilerinin yürütme sırası, API Sunucusu yapılandırma parametrelerinde tanımlanır.
VPA çoğu yetersiz bellek (OOM) olayını işler ancak tüm senaryolarda etkili olacağı garanti edilmez.
VPA'nın performansı büyük ölçekli kümelerde test edilmemiştir.
VPA tarafından değiştirilen kaynak talep değerleri, düğüm kaynak sınırları, kullanılabilir kaynaklar veya kaynak kotaları gibi kaynak sınırlarını aşabilir. Bu durum, pod'ların Pending durumuna geçmesine ve zamanlanamamasına neden olabilir. Bu sorunu çözmek için Cluster Autoscaler'ı kullanabilirsiniz.
Birden fazla VPA aynı pod'la eşleşirse tanımsız davranışlara yol açabilir.
Dikey Pod Otomatik Ölçekleyici'yi yükleme
-
Role Tabanlı Erişim Kontrolü (RBAC) izin dosyasını oluşturmak için aşağıdaki komutu çalıştırın.
kubectl apply -f rbac.yamlYAML dosyasını görüntülemek için genişletin
apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: system:metrics-reader rules: - apiGroups: - "metrics.k8s.io" resources: - pods verbs: - get - list --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: system:vpa-actor rules: - apiGroups: - "" resources: - pods - nodes - limitranges verbs: - get - list - watch - apiGroups: - "" resources: - events verbs: - get - list - watch - create - apiGroups: - "poc.autoscaling.k8s.io" resources: - verticalpodautoscalers verbs: - get - list - watch - patch - apiGroups: - "autoscaling.k8s.io" resources: - verticalpodautoscalers verbs: - get - list - watch - patch --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: system:vpa-checkpoint-actor rules: - apiGroups: - "poc.autoscaling.k8s.io" resources: - verticalpodautoscalercheckpoints verbs: - get - list - watch - create - patch - delete - apiGroups: - "autoscaling.k8s.io" resources: - verticalpodautoscalercheckpoints verbs: - get - list - watch - create - patch - delete - apiGroups: - "" resources: - namespaces verbs: - get - list --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: system:evictioner rules: - apiGroups: - "apps" - "extensions" resources: - replicasets verbs: - get - apiGroups: - "" resources: - pods/eviction verbs: - create --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: system:metrics-reader roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:metrics-reader subjects: - kind: ServiceAccount name: vpa-recommender namespace: kube-system --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: system:vpa-actor roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:vpa-actor subjects: - kind: ServiceAccount name: vpa-recommender namespace: kube-system - kind: ServiceAccount name: vpa-updater namespace: kube-system --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: system:vpa-checkpoint-actor roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:vpa-checkpoint-actor subjects: - kind: ServiceAccount name: vpa-recommender namespace: kube-system --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: system:vpa-target-reader rules: - apiGroups: - '*' resources: - '*/scale' verbs: - get - watch - apiGroups: - "" resources: - replicationcontrollers verbs: - get - list - watch - apiGroups: - apps resources: - daemonsets - deployments - replicasets - statefulsets verbs: - get - list - watch - apiGroups: - batch resources: - jobs - cronjobs verbs: - get - list - watch --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: system:vpa-target-reader-binding roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:vpa-target-reader subjects: - kind: ServiceAccount name: vpa-recommender namespace: kube-system - kind: ServiceAccount name: vpa-admission-controller namespace: kube-system - kind: ServiceAccount name: vpa-updater namespace: kube-system --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: system:vpa-evictioner-binding roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:evictioner subjects: - kind: ServiceAccount name: vpa-updater namespace: kube-system --- apiVersion: v1 kind: ServiceAccount metadata: name: vpa-admission-controller namespace: kube-system --- apiVersion: v1 kind: ServiceAccount metadata: name: vpa-recommender namespace: kube-system --- apiVersion: v1 kind: ServiceAccount metadata: name: vpa-updater namespace: kube-system --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: system:vpa-admission-controller rules: - apiGroups: - "" resources: - pods - configmaps - nodes - limitranges verbs: - get - list - watch - apiGroups: - "admissionregistration.k8s.io" resources: - mutatingwebhookconfigurations verbs: - create - delete - get - list - apiGroups: - "poc.autoscaling.k8s.io" resources: - verticalpodautoscalers verbs: - get - list - watch - apiGroups: - "autoscaling.k8s.io" resources: - verticalpodautoscalers verbs: - get - list - watch - apiGroups: - "coordination.k8s.io" resources: - leases verbs: - create - update - get - list - watch --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: system:vpa-admission-controller roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:vpa-admission-controller subjects: - kind: ServiceAccount name: vpa-admission-controller namespace: kube-system --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRole metadata: name: system:vpa-status-reader rules: - apiGroups: - "coordination.k8s.io" resources: - leases verbs: - get - list - watch --- apiVersion: rbac.authorization.k8s.io/v1 kind: ClusterRoleBinding metadata: name: system:vpa-status-reader-binding roleRef: apiGroup: rbac.authorization.k8s.io kind: ClusterRole name: system:vpa-status-reader subjects: - kind: ServiceAccount name: vpa-updater namespace: kube-system -
Dikey Pod Otomatik Ölçekleyici için CustomResourceDefinition (CRD) oluşturmak üzere aşağıdaki komutu çalıştırın.
CRD'ler Kubernetes'in yeteneklerini genişletir. Daha fazla bilgi için bkz. CustomResourceDefinitions ile Kubernetes API'sini genişletme.
kubectl apply -f crd.yaml1,22'den önceki küme sürümleri için crd.yaml tanımı
apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: verticalpodautoscalers.autoscaling.k8s.io annotations: "api-approved.kubernetes.io": "https://github.com/kubernetes/kubernetes/pull/63797" spec: group: autoscaling.k8s.io scope: Namespaced names: plural: verticalpodautoscalers singular: verticalpodautoscaler kind: VerticalPodAutoscaler shortNames: - vpa version: v1beta1 versions: - name: v1beta1 served: false storage: false - name: v1beta2 served: true storage: true - name: v1 served: true storage: false validation: # openAPIV3Schema is the schema for validating custom objects. openAPIV3Schema: type: object properties: spec: type: object required: [] properties: targetRef: type: object updatePolicy: type: object properties: updateMode: type: string resourcePolicy: type: object properties: containerPolicies: type: array items: type: object properties: containerName: type: string controlledValues: type: string enum: ["RequestsAndLimits", "RequestsOnly"] mode: type: string enum: ["Auto", "Off"] minAllowed: type: object maxAllowed: type: object controlledResources: type: array items: type: string enum: ["cpu", "memory"] --- apiVersion: apiextensions.k8s.io/v1beta1 kind: CustomResourceDefinition metadata: name: verticalpodautoscalercheckpoints.autoscaling.k8s.io annotations: "api-approved.kubernetes.io": "https://github.com/kubernetes/kubernetes/pull/63797" spec: group: autoscaling.k8s.io scope: Namespaced names: plural: verticalpodautoscalercheckpoints singular: verticalpodautoscalercheckpoint kind: VerticalPodAutoscalerCheckpoint shortNames: - vpacheckpoint version: v1beta1 versions: - name: v1beta1 served: false storage: false - name: v1beta2 served: true storage: true - name: v1 served: true storage: false1,22 ve sonraki küme sürümleri için crd.yaml tanımı
apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: annotations: api-approved.kubernetes.io: https://github.com/kubernetes/kubernetes/pull/63797 controller-gen.kubebuilder.io/version: v0.9.2 creationTimestamp: null name: verticalpodautoscalercheckpoints.autoscaling.k8s.io spec: group: autoscaling.k8s.io names: kind: VerticalPodAutoscalerCheckpoint listKind: VerticalPodAutoscalerCheckpointList plural: verticalpodautoscalercheckpoints shortNames: - vpacheckpoint singular: verticalpodautoscalercheckpoint scope: Namespaced versions: - name: v1 schema: openAPIV3Schema: description: VerticalPodAutoscalerCheckpoint is the checkpoint of the internal state of VPA that is used for recovery after recommender's restart. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: 'Specification of the checkpoint. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.' properties: containerName: description: Name of the checkpointed container. type: string vpaObjectName: description: Name of the VPA object that stored VerticalPodAutoscalerCheckpoint object. type: string type: object status: description: Data of the checkpoint. properties: cpuHistogram: description: Checkpoint of histogram for consumption of CPU. properties: bucketWeights: description: Map from bucket index to bucket weight. type: object x-kubernetes-preserve-unknown-fields: true referenceTimestamp: description: Reference timestamp for samples collected within this histogram. format: date-time nullable: true type: string totalWeight: description: Sum of samples to be used as denominator for weights from BucketWeights. type: number type: object firstSampleStart: description: Timestamp of the fist sample from the histograms. format: date-time nullable: true type: string lastSampleStart: description: Timestamp of the last sample from the histograms. format: date-time nullable: true type: string lastUpdateTime: description: The time when the status was last refreshed. format: date-time nullable: true type: string memoryHistogram: description: Checkpoint of histogram for consumption of memory. properties: bucketWeights: description: Map from bucket index to bucket weight. type: object x-kubernetes-preserve-unknown-fields: true referenceTimestamp: description: Reference timestamp for samples collected within this histogram. format: date-time nullable: true type: string totalWeight: description: Sum of samples to be used as denominator for weights from BucketWeights. type: number type: object totalSamplesCount: description: Total number of samples in the histograms. type: integer version: description: Version of the format of the stored data. type: string type: object type: object served: true storage: true - name: v1beta2 schema: openAPIV3Schema: description: VerticalPodAutoscalerCheckpoint is the checkpoint of the internal state of VPA that is used for recovery after recommender's restart. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: 'Specification of the checkpoint. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.' properties: containerName: description: Name of the checkpointed container. type: string vpaObjectName: description: Name of the VPA object that stored VerticalPodAutoscalerCheckpoint object. type: string type: object status: description: Data of the checkpoint. properties: cpuHistogram: description: Checkpoint of histogram for consumption of CPU. properties: bucketWeights: description: Map from bucket index to bucket weight. type: object x-kubernetes-preserve-unknown-fields: true referenceTimestamp: description: Reference timestamp for samples collected within this histogram. format: date-time nullable: true type: string totalWeight: description: Sum of samples to be used as denominator for weights from BucketWeights. type: number type: object firstSampleStart: description: Timestamp of the fist sample from the histograms. format: date-time nullable: true type: string lastSampleStart: description: Timestamp of the last sample from the histograms. format: date-time nullable: true type: string lastUpdateTime: description: The time when the status was last refreshed. format: date-time nullable: true type: string memoryHistogram: description: Checkpoint of histogram for consumption of memory. properties: bucketWeights: description: Map from bucket index to bucket weight. type: object x-kubernetes-preserve-unknown-fields: true referenceTimestamp: description: Reference timestamp for samples collected within this histogram. format: date-time nullable: true type: string totalWeight: description: Sum of samples to be used as denominator for weights from BucketWeights. type: number type: object totalSamplesCount: description: Total number of samples in the histograms. type: integer version: description: Version of the format of the stored data. type: string type: object type: object served: true storage: false --- apiVersion: apiextensions.k8s.io/v1 kind: CustomResourceDefinition metadata: annotations: api-approved.kubernetes.io: https://github.com/kubernetes/kubernetes/pull/63797 controller-gen.kubebuilder.io/version: v0.9.2 creationTimestamp: null name: verticalpodautoscalers.autoscaling.k8s.io spec: group: autoscaling.k8s.io names: kind: VerticalPodAutoscaler listKind: VerticalPodAutoscalerList plural: verticalpodautoscalers shortNames: - vpa singular: verticalpodautoscaler scope: Namespaced versions: - additionalPrinterColumns: - jsonPath: .spec.updatePolicy.updateMode name: Mode type: string - jsonPath: .status.recommendation.containerRecommendations[0].target.cpu name: CPU type: string - jsonPath: .status.recommendation.containerRecommendations[0].target.memory name: Mem type: string - jsonPath: .status.conditions[?(@.type=='RecommendationProvided')].status name: Provided type: string - jsonPath: .metadata.creationTimestamp name: Age type: date name: v1 schema: openAPIV3Schema: description: VerticalPodAutoscaler is the configuration for a vertical pod autoscaler, which automatically manages pod resources based on historical and real time resource utilization. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: 'Specification of the behavior of the autoscaler. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.' properties: recommenders: description: Recommender responsible for generating recommendation for this object. List should be empty (then the default recommender will generate the recommendation) or contain exactly one recommender. items: description: VerticalPodAutoscalerRecommenderSelector points to a specific Vertical Pod Autoscaler recommender. In the future it might pass parameters to the recommender. properties: name: description: Name of the recommender responsible for generating recommendation for this object. type: string required: - name type: object type: array resourcePolicy: description: Controls how the autoscaler computes recommended resources. The resource policy may be used to set constraints on the recommendations for individual containers. If not specified, the autoscaler computes recommended resources for all containers in the pod, without additional constraints. properties: containerPolicies: description: Per-container resource policies. items: description: ContainerResourcePolicy controls how autoscaler computes the recommended resources for a specific container. properties: containerName: description: Name of the container or DefaultContainerResourcePolicy, in which case the policy is used by the containers that don't have their own policy specified. type: string controlledResources: description: Specifies the type of recommendations that will be computed (and possibly applied) by VPA. If not specified, the default of [ResourceCPU, ResourceMemory] will be used. items: description: ResourceName is the name identifying various resources in a ResourceList. type: string type: array controlledValues: description: Specifies which resource values should be controlled. The default is "RequestsAndLimits". enum: - RequestsAndLimits - RequestsOnly type: string maxAllowed: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Specifies the maximum amount of resources that will be recommended for the container. The default is no maximum. type: object minAllowed: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Specifies the minimal amount of resources that will be recommended for the container. The default is no minimum. type: object mode: description: Whether autoscaler is enabled for the container. The default is "Auto". enum: - Auto - "Off" type: string type: object type: array type: object targetRef: description: TargetRef points to the controller managing the set of pods for the autoscaler to control - e.g. Deployment, StatefulSet. VerticalPodAutoscaler can be targeted at controller implementing scale subresource (the pod set is retrieved from the controller's ScaleStatus) or some well known controllers (e.g. for DaemonSet the pod set is read from the controller's spec). If VerticalPodAutoscaler cannot use specified target it will report ConfigUnsupported condition. Note that VerticalPodAutoscaler does not require full implementation of scale subresource - it will not use it to modify the replica count. The only thing retrieved is a label selector matching pods grouped by the target resource. properties: apiVersion: description: API version of the referent type: string kind: description: 'Kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds"' type: string name: description: 'Name of the referent; More info: http://kubernetes.io/docs/user-guide/identifiers#names' type: string required: - kind - name type: object x-kubernetes-map-type: atomic updatePolicy: description: Describes the rules on how changes are applied to the pods. If not specified, all fields in the `PodUpdatePolicy` are set to their default values. properties: minReplicas: description: Minimal number of replicas which need to be alive for Updater to attempt pod eviction (pending other checks like PDB). Only positive values are allowed. Overrides global '--min-replicas' flag. format: int32 type: integer updateMode: description: Controls when autoscaler applies changes to the pod resources. The default is 'Auto'. enum: - "Off" - Initial - Recreate - Auto type: string type: object required: - targetRef type: object status: description: Current information about the autoscaler. properties: conditions: description: Conditions is the set of conditions required for this autoscaler to scale its target, and indicates whether or not those conditions are met. items: description: VerticalPodAutoscalerCondition describes the state of a VerticalPodAutoscaler at a certain point. properties: lastTransitionTime: description: lastTransitionTime is the last time the condition transitioned from one status to another format: date-time type: string message: description: message is a human-readable explanation containing details about the transition type: string reason: description: reason is the reason for the condition's last transition. type: string status: description: status is the status of the condition (True, False, Unknown) type: string type: description: type describes the current condition type: string required: - status - type type: object type: array recommendation: description: The most recently computed amount of resources recommended by the autoscaler for the controlled pods. properties: containerRecommendations: description: Resources recommended by the autoscaler for each container. items: description: RecommendedContainerResources is the recommendation of resources computed by autoscaler for a specific container. Respects the container resource policy if present in the spec. In particular the recommendation is not produced for containers with `ContainerScalingMode` set to 'Off'. properties: containerName: description: Name of the container. type: string lowerBound: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Minimum recommended amount of resources. Observes ContainerResourcePolicy. This amount is not guaranteed to be sufficient for the application to operate in a stable way, however running with less resources is likely to have significant impact on performance/availability. type: object target: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Recommended amount of resources. Observes ContainerResourcePolicy. type: object uncappedTarget: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: The most recent recommended resources target computed by the autoscaler for the controlled pods, based only on actual resource usage, not taking into account the ContainerResourcePolicy. May differ from the Recommendation if the actual resource usage causes the target to violate the ContainerResourcePolicy (lower than MinAllowed or higher that MaxAllowed). Used only as status indication, will not affect actual resource assignment. type: object upperBound: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Maximum recommended amount of resources. Observes ContainerResourcePolicy. Any resources allocated beyond this value are likely wasted. This value may be larger than the maximum amount of application is actually capable of consuming. type: object required: - target type: object type: array type: object type: object required: - spec type: object served: true storage: true subresources: {} - deprecated: true deprecationWarning: autoscaling.k8s.io/v1beta2 API is deprecated name: v1beta2 schema: openAPIV3Schema: description: VerticalPodAutoscaler is the configuration for a vertical pod autoscaler, which automatically manages pod resources based on historical and real time resource utilization. properties: apiVersion: description: 'APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources' type: string kind: description: 'Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds' type: string metadata: type: object spec: description: 'Specification of the behavior of the autoscaler. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status.' properties: resourcePolicy: description: Controls how the autoscaler computes recommended resources. The resource policy may be used to set constraints on the recommendations for individual containers. If not specified, the autoscaler computes recommended resources for all containers in the pod, without additional constraints. properties: containerPolicies: description: Per-container resource policies. items: description: ContainerResourcePolicy controls how autoscaler computes the recommended resources for a specific container. properties: containerName: description: Name of the container or DefaultContainerResourcePolicy, in which case the policy is used by the containers that don't have their own policy specified. type: string maxAllowed: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Specifies the maximum amount of resources that will be recommended for the container. The default is no maximum. type: object minAllowed: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Specifies the minimal amount of resources that will be recommended for the container. The default is no minimum. type: object mode: description: Whether autoscaler is enabled for the container. The default is "Auto". enum: - Auto - "Off" type: string type: object type: array type: object targetRef: description: TargetRef points to the controller managing the set of pods for the autoscaler to control - e.g. Deployment, StatefulSet. VerticalPodAutoscaler can be targeted at controller implementing scale subresource (the pod set is retrieved from the controller's ScaleStatus) or some well known controllers (e.g. for DaemonSet the pod set is read from the controller's spec). If VerticalPodAutoscaler cannot use specified target it will report ConfigUnsupported condition. Note that VerticalPodAutoscaler does not require full implementation of scale subresource - it will not use it to modify the replica count. The only thing retrieved is a label selector matching pods grouped by the target resource. properties: apiVersion: description: API version of the referent type: string kind: description: 'Kind of the referent; More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds"' type: string name: description: 'Name of the referent; More info: http://kubernetes.io/docs/user-guide/identifiers#names' type: string required: - kind - name type: object x-kubernetes-map-type: atomic updatePolicy: description: Describes the rules on how changes are applied to the pods. If not specified, all fields in the `PodUpdatePolicy` are set to their default values. properties: updateMode: description: Controls when autoscaler applies changes to the pod resources. The default is 'Auto'. enum: - "Off" - Initial - Recreate - Auto type: string type: object required: - targetRef type: object status: description: Current information about the autoscaler. properties: conditions: description: Conditions is the set of conditions required for this autoscaler to scale its target, and indicates whether or not those conditions are met. items: description: VerticalPodAutoscalerCondition describes the state of a VerticalPodAutoscaler at a certain point. properties: lastTransitionTime: description: lastTransitionTime is the last time the condition transitioned from one status to another format: date-time type: string message: description: message is a human-readable explanation containing details about the transition type: string reason: description: reason is the reason for the condition's last transition. type: string status: description: status is the status of the condition (True, False, Unknown) type: string type: description: type describes the current condition type: string required: - status - type type: object type: array recommendation: description: The most recently computed amount of resources recommended by the autoscaler for the controlled pods. properties: containerRecommendations: description: Resources recommended by the autoscaler for each container. items: description: RecommendedContainerResources is the recommendation of resources computed by autoscaler for a specific container. Respects the container resource policy if present in the spec. In particular the recommendation is not produced for containers with `ContainerScalingMode` set to 'Off'. properties: containerName: description: Name of the container. type: string lowerBound: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Minimum recommended amount of resources. Observes ContainerResourcePolicy. This amount is not guaranteed to be sufficient for the application to operate in a stable way, however running with less resources is likely to have significant impact on performance/availability. type: object target: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Recommended amount of resources. Observes ContainerResourcePolicy. type: object uncappedTarget: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: The most recent recommended resources target computed by the autoscaler for the controlled pods, based only on actual resource usage, not taking into account the ContainerResourcePolicy. May differ from the Recommendation if the actual resource usage causes the target to violate the ContainerResourcePolicy (lower than MinAllowed or higher that MaxAllowed). Used only as status indication, will not affect actual resource assignment. type: object upperBound: additionalProperties: anyOf: - type: integer - type: string pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true description: Maximum recommended amount of resources. Observes ContainerResourcePolicy. Any resources allocated beyond this value are likely wasted. This value may be larger than the maximum amount of application is actually capable of consuming. type: object required: - target type: object type: array type: object type: object required: - spec type: object served: true storage: false -
Dikey Pod Otomatik Ölçekleyici bileşenlerini yükleyin.
Dikey Pod Otomatik Ölçekleyici bileşenleri admission-controller, recommender ve updater'dan oluşur.
Notadmission-controller bileşenini yüklemeden önce, web kancası için bir sertifika oluşturmak amacıyla bu betiği kullanın.
-
1,22'den önceki küme sürümleri için YAML tanımı
admission-controller bileşenini yükleme
apiVersion: apps/v1 kind: Deployment metadata: name: vpa-admission-controller namespace: kube-system spec: replicas: 1 selector: matchLabels: app: vpa-admission-controller template: metadata: labels: app: vpa-admission-controller spec: serviceAccountName: admin containers: - name: admission-controller image: registry.cn-hangzhou.aliyuncs.com/acs/vpa-admission-controller:0.7.0 imagePullPolicy: Always env: - name: NAMESPACE valueFrom: fieldRef: fieldPath: metadata.namespace volumeMounts: - name: tls-certs mountPath: "/etc/tls-certs" readOnly: true resources: limits: cpu: 200m memory: 500Mi requests: cpu: 50m memory: 200Mi ports: - containerPort: 8000 volumes: - name: tls-certs secret: secretName: vpa-tls-certs --- apiVersion: v1 kind: Service metadata: name: vpa-webhook namespace: kube-system spec: ports: - port: 443 targetPort: 8000 selector: app: vpa-admission-controllerrecommender bileşenini yükleme
apiVersion: apps/v1 kind: Deployment metadata: name: vpa-recommender namespace: kube-system spec: replicas: 1 selector: matchLabels: app: vpa-recommender template: metadata: labels: app: vpa-recommender spec: serviceAccountName: admin containers: - name: recommender image: registry.cn-hangzhou.aliyuncs.com/acs/vpa-recommender:0.7.0 imagePullPolicy: Always resources: limits: cpu: 200m memory: 1000Mi requests: cpu: 50m memory: 500Mi ports: - containerPort: 8080updater bileşenini yükleme
apiVersion: apps/v1 kind: Deployment metadata: name: vpa-updater namespace: kube-system spec: replicas: 1 selector: matchLabels: app: vpa-updater template: metadata: labels: app: vpa-updater spec: serviceAccountName: admin containers: - name: updater image: registry.cn-hangzhou.aliyuncs.com/acs/vpa-updater:0.7.0 imagePullPolicy: Always resources: limits: cpu: 200m memory: 1000Mi requests: cpu: 50m memory: 500Mi ports: - containerPort: 8080 -
1,22 ve sonraki küme sürümleri için YAML tanımı
admission-controller bileşenini yükleme
apiVersion: apps/v1 kind: Deployment metadata: name: vpa-admission-controller namespace: kube-system spec: replicas: 1 selector: matchLabels: app: vpa-admission-controller template: metadata: labels: app: vpa-admission-controller spec: serviceAccountName: vpa-admission-controller securityContext: runAsNonRoot: true runAsUser: 65534 # nobody containers: - name: admission-controller image: registry.cn-hangzhou.aliyuncs.com/acs/vpa-admission-controller:0.13.0 imagePullPolicy: Always env: - name: NAMESPACE valueFrom: fieldRef: fieldPath: metadata.namespace volumeMounts: - name: tls-certs mountPath: "/etc/tls-certs" readOnly: true resources: limits: cpu: 200m memory: 500Mi requests: cpu: 50m memory: 200Mi ports: - containerPort: 8000 - name: prometheus containerPort: 8944 volumes: - name: tls-certs secret: secretName: vpa-tls-certs --- apiVersion: v1 kind: Service metadata: name: vpa-webhook namespace: kube-system spec: ports: - port: 443 targetPort: 8000 selector: app: vpa-admission-controllerrecommender bileşenini yükleme
apiVersion: apps/v1 kind: Deployment metadata: name: vpa-recommender namespace: kube-system spec: replicas: 1 selector: matchLabels: app: vpa-recommender template: metadata: labels: app: vpa-recommender spec: serviceAccountName: vpa-recommender securityContext: runAsNonRoot: true runAsUser: 65534 # nobody containers: - name: recommender image: registry.cn-hangzhou.aliyuncs.com/acs/vpa-recommender:0.13.0 imagePullPolicy: Always resources: limits: cpu: 200m memory: 1000Mi requests: cpu: 50m memory: 500Mi ports: - name: prometheus containerPort: 8942updater bileşenini yükleme
apiVersion: apps/v1 kind: Deployment metadata: name: vpa-updater namespace: kube-system spec: replicas: 1 selector: matchLabels: app: vpa-updater template: metadata: labels: app: vpa-updater spec: serviceAccountName: vpa-updater securityContext: runAsNonRoot: true runAsUser: 65534 # nobody containers: - name: updater image: registry.cn-hangzhou.aliyuncs.com/acs/vpa-updater:0.13.0 imagePullPolicy: Always env: - name: NAMESPACE valueFrom: fieldRef: fieldPath: metadata.namespace resources: limits: cpu: 200m memory: 1000Mi requests: cpu: 50m memory: 500Mi ports: - name: prometheus containerPort: 8943
-
VPA kurulumunu doğrulama
-
nginx-deployment-basic adlı bir dağıtım ve nginx-deployment-basic-vpa adlı bir VPA kaynağı oluşturmak için aşağıdaki YAML tanımını kullanın.
YAML dosyasını görüntülemek için genişletin
apiVersion: apps/v1 kind: Deployment metadata: name: nginx-deployment-basic labels: app: nginx spec: replicas: 2 selector: matchLabels: app: nginx template: metadata: labels: app: nginx spec: containers: - name: nginx image: nginx:1.7.9 ports: - containerPort: 80 --- apiVersion: autoscaling.k8s.io/v1 kind: VerticalPodAutoscaler metadata: name: nginx-deployment-basic-vpa spec: targetRef: apiVersion: "apps/v1" kind: Deployment name: nginx-deployment-basic updatePolicy: updateMode: "Off"NotupdateMode parametresini Off olarak ayarlayın ve dağıtımdaki kaynak talepleri ile sınırlarını boş bırakın.
-
Dağıtım için önerilen CPU ve bellek kaynak talep değerlerini sorgulamak üzere aşağıdaki komutu çalıştırın.
NotKomutu çalıştırdıktan sonra, VPA'nın önerilen değerleri döndürmesi için yaklaşık iki dakika bekleyin.
kubectl describe vpa nginx-deployment-basic-vpaKomutu çalıştırdıktan sonra aşağıdaki önerilen değerler döndürülür.
Ayrıntıları görüntülemek için genişletin
Recommendation: Container Recommendations: Container Name: nginx Lower Bound: Cpu: 25m Memory: 262144k Target: Cpu: 25m Memory: 262144k Uncapped Target: Cpu: 25m Memory: 262144k Upper Bound: Cpu: 11601m Memory: 12128573170Önerilen değerleri kullanarak dağıtımın kaynak taleplerini yapılandırabilirsiniz. VPA, uygulamanın kaynak kullanımını sürekli olarak izler ve optimizasyon önerileri sunar.