Mengkueri data pemantauan lalu lintas back-to-origin untuk satu atau beberapa domain yang dipercepat yang ditentukan. Data dikumpulkan setiap menit.
Deskripsi operasi
-
Each account can call this operation up to 10 times per second.
-
If you do not specify the StartTime or EndTime parameter, the request returns the data collected in the last hour by default. If you specify both the StartTime and EndTime parameters, the request returns the data collected within the specified time range.
Time granularity
The time granularity varies with the time range specified by the StartTime and EndTime parameters. The following table describes the time period within which historical data is available and the data delay.
| Time granularity | Maximum time range per query | Historical data available | Data delay |
| 1 minute | 1 hour | 7 days | 5 minutes |
| 5 minutes | 3 days | 93 days | 15 minutes |
| 1 hour | 31 days | 186 days | 4 hours |
Coba sekarang
Test
RAM authorization
|
Action |
Access level |
Resource type |
Condition key |
Dependent action |
|
cdn:DescribeDomainRealTimeSrcTrafficData |
none |
*Domain
|
None | None |
Parameter permintaan
|
Parameter |
Type |
Required |
Description |
Example |
| DomainName |
string |
Yes |
Nama domain yang dipercepat. Anda dapat menentukan hingga 100 nama domain dalam setiap panggilan. Pisahkan beberapa nama domain dengan koma (,). |
example.com |
| StartTime |
string |
No |
Awal rentang waktu yang akan dikueri. Tentukan waktu dalam standar ISO 8601 dengan format yyyy-MM-ddTHH:mm:ssZ. Waktu harus dalam UTC. |
2019-12-10T20:00:00Z |
| EndTime |
string |
No |
Akhir rentang waktu yang akan dikueri. Tentukan waktu dalam standar ISO 8601 dengan format yyyy-MM-ddTHH:mm:ssZ. Waktu harus dalam UTC. Catatan
Waktu akhir harus lebih lambat daripada waktu mulai. |
2019-12-10T20:01:00Z |
Elemen respons
|
Element |
Type |
Description |
Example |
|
object |
|||
| EndTime |
string |
The end of the time range for which the data was queried. |
2019-12-10T20:01:00Z |
| StartTime |
string |
The start of the time range for which the data was queried. |
2019-12-10T20:00:00Z |
| RequestId |
string |
The ID of the request. |
A666D44F-19D6-490E-97CF-1A64AB962C57 |
| DomainName |
string |
The accelerated domain name. |
example.com |
| DataInterval |
string |
The time interval between the data entries returned. Unit: seconds. Depending on the maximum time range per query, the value is 60 (1 minute), 300 (5 minutes), or 3600 (1 hour). For more information, see the "Time granularity" section in Usage notes. |
60 |
| RealTimeSrcTrafficDataPerInterval |
object |
||
| DataModule |
array<object> |
The amount of back-to-origin traffic returned at each interval. |
|
|
object |
|||
| Value |
string |
The amount of traffic. |
0 |
| TimeStamp |
string |
The timestamp of the data returned. |
2019-12-10T20:01:00Z |
Contoh
Respons sukses
JSONformat
{
"EndTime": "2019-12-10T20:01:00Z",
"StartTime": "2019-12-10T20:00:00Z",
"RequestId": "A666D44F-19D6-490E-97CF-1A64AB962C57",
"DomainName": "example.com",
"DataInterval": "60",
"RealTimeSrcTrafficDataPerInterval": {
"DataModule": [
{
"Value": "0",
"TimeStamp": "2019-12-10T20:01:00Z"
}
]
}
}
Respons error
JSONformat
{
"DomainName": "example.com",
"DataInterval": "60",
"RealTimeSrcTrafficDataPerInterval": {
"DataModule": [
{
"TimeStamp": "2015-12-10T20:00:00Z",
"Value": "0"
},
{
"TimeStamp": "2015-12-10T20:01:00Z",
"Value": "0"
}
]
},
"RequestId": "A666D44F-19D6-490E-97CF-1A64AB962C57",
"StartTime": "2015-12-10T20:00:00Z",
"EndTime": "2015-12-10T20:01:00Z"
}
Kode kesalahan
|
HTTP status code |
Error code |
Error message |
Description |
|---|---|---|---|
| 400 | MissingParameter | StartTime and EndTime can not be single. | |
| 400 | InvalidStartTime.Malformed | The specified value of parameter StartTime is malformed. | |
| 400 | InvalidEndTime.Malformed | The specified value of parameter EndTime is malformed. | |
| 400 | InvalidEndTime.Mismatch | Specified EndTime does not match the specified StartTime. | |
| 400 | InvalidStartTime.ValueNotSupported | The specified value of parameter StartTime is not supported. | |
| 400 | InvalidDomainName.Overlimit | Too many DomainNames are specified. | |
| 400 | InvalidInterval.Malformed | Specified Interval is malformed. |
Lihat Error Codes untuk daftar lengkap.
Catatan rilis
Lihat Release Notes untuk daftar lengkap.