DescribeEciScalingConfigurationDetail - Auto Scaling - Alibaba Cloud Documentation Center

Memanggil API DescribeEciScalingConfigurationDetail untuk mengueri detail konfigurasi penskalaan grup penskalaan berdasarkan ID konfigurasi penskalaan (seperti ukuran penyimpanan sementara, jumlah alamat IPv6, dan bandwidth elastic IP address). Output dapat dalam format YAML.

Coba sekarang

Coba API ini di OpenAPI Explorer tanpa perlu penandatanganan manual. Panggilan yang berhasil akan secara otomatis menghasilkan contoh kode SDK sesuai dengan parameter Anda. Unduh kode tersebut dengan kredensial bawaan yang aman untuk penggunaan lokal.

Test

RAM authorization

Tabel berikut menjelaskan otorisasi yang diperlukan untuk memanggil API ini. Anda dapat menentukannya dalam kebijakan Resource Access Management (RAM). Kolom pada tabel dijelaskan sebagai berikut:

Action: Aksi yang dapat digunakan dalam elemen Action pada pernyataan kebijakan izin RAM untuk memberikan izin guna melakukan operasi tersebut.
API: API yang dapat Anda panggil untuk melakukan aksi tersebut.
Access level: Tingkat akses yang telah ditentukan untuk setiap API. Nilai yang valid: create, list, get, update, dan delete.
Resource type: Jenis resource yang mendukung otorisasi untuk melakukan aksi tersebut. Ini menunjukkan apakah aksi tersebut mendukung izin tingkat resource. Resource yang ditentukan harus kompatibel dengan aksi tersebut. Jika tidak, kebijakan tersebut tidak akan berlaku.
- Untuk API dengan izin tingkat resource, jenis resource yang diperlukan ditandai dengan tanda bintang (*). Tentukan Nama Sumber Daya Alibaba Cloud (ARN) yang sesuai dalam elemen Resource pada kebijakan.
- Untuk API tanpa izin tingkat resource, ditampilkan sebagai All Resources. Gunakan tanda bintang (*) dalam elemen Resource pada kebijakan.
Condition key: Kunci kondisi yang didefinisikan oleh layanan. Kunci ini memungkinkan kontrol granular, berlaku baik hanya untuk aksi maupun untuk aksi yang terkait dengan resource tertentu. Selain kunci kondisi spesifik layanan, Alibaba Cloud menyediakan serangkaian common condition keys yang berlaku di semua layanan yang didukung RAM.
Dependent action: Aksi dependen yang diperlukan untuk menjalankan aksi tersebut. Untuk menyelesaikan aksi tersebut, pengguna RAM atau role RAM harus memiliki izin untuk melakukan semua aksi dependen.

Action

Access level

Resource type

Condition key

Dependent action

ess:DescribeEciScalingConfigurationDetail

get

*ScalingGroup

acs:ess:{#regionId}:{#accountId}:scalinggroup/{#ScalingGroupId}

None

Parameter permintaan

Parameter	Type	Required	Description	Example
RegionId	string	Yes	ID wilayah grup penskalaan tempat aturan penskalaan berada.	cn-beijing
ScalingGroupId	string	No	ID grup penskalaan tempat konfigurasi penskalaan berada.	asg-bp1ffogfdauy0jw0****
ScalingConfigurationId	string	Yes	ID konfigurasi penskalaan dari grup penskalaan tipe ECI.	asc-bp1ffogfdauy0nu5****
OutputFormat	string	No	Format output. Saat ini, hanya YAML yang didukung. Valid values: YAML : YAML	yaml

Elemen respons

Element	Type	Description	Example
	object
RequestId	string	ID permintaan.	6EF9BFEE-FE07-4627-B8FB-14326FB9****
ScalingConfiguration	object	Detail konfigurasi penskalaan.
CreationTime	string	Waktu saat konfigurasi penskalaan dibuat.	2023-05-10T02:39:15Z
ScalingConfigurationName	string	Nama konfigurasi penskalaan.	scalingconfi****
SecurityGroupId	string	ID grup keamanan tempat instans ECI berada. Instans ECI dalam grup keamanan yang sama dapat saling mengakses.	sg-bp18kz60mefs****
ActiveDeadlineSeconds	integer	Periode validitas. Satuan: detik.	60
SpotStrategy	string	Kebijakan preemption instans. Nilai yang valid: NoSpot: instans pay-as-you-go. SpotWithPriceLimit: instans preemptible dengan batas harga maksimum. SpotAsPriceGo: instans preemptible di mana sistem secara otomatis menawar berdasarkan harga pasar saat ini.	NoSpot
AutoCreateEip	boolean	Menunjukkan apakah elastic IP address (EIP) secara otomatis dibuat dan diikat ke instans ECI.	true
ScalingGroupId	string	ID grup penskalaan.	asg-bp1frlu04fq4zv65b1bh
EphemeralStorage	integer	Ukuran penyimpanan sementara. Satuan: GiB.	20
Ipv6AddressCount	integer	Jumlah alamat IPv6.	1
Description	string	Catatan Parameter ini tidak tersedia untuk digunakan.	This is an example.
EipBandwidth	integer	Bandwidth elastic IP address (EIP). Nilai default: 5 Mbit/s.	5
ImageSnapshotId	string	ID cache image.	imc-2zebxkiifuyzzlhl****
Memory	number	Ukuran memori. Satuan: GiB. Menentukan CPU dan Memory secara bersamaan mendefinisikan rentang tipe instans. Misalnya, CPU=2 dan Memory=16 mendefinisikan semua tipe instans dengan 2 vCPU dan 16 GiB memori. Auto Scaling menentukan kumpulan tipe instans yang tersedia berdasarkan faktor seperti optimasi I/O dan zona, dan membuat instans dengan harga terendah dengan mengurutkan berdasarkan harga. Catatan Konfigurasi rentang ini hanya berlaku dalam mode optimasi biaya dan saat tidak ada tipe instans yang ditentukan dalam konfigurasi penskalaan.	4
RestartPolicy	string	Kebijakan restart grup container. Nilai yang valid: Never: tidak pernah restart. Always: selalu restart. OnFailure: restart saat terjadi kegagalan.	Always
SpotPriceLimit	number	Harga maksimum per jam untuk instans preemptible. Parameter ini hanya dikembalikan saat SpotStrategy diatur ke SpotWithPriceLimit.	0.025
IngressBandwidth	integer	Batas bandwidth masuk. Satuan: byte.	1024000
CpuOptionsThreadsPerCore	integer	Jumlah thread per core. Hanya beberapa tipe instans yang mendukung pengaturan kustom. Nilai 1 menunjukkan bahwa Hyper-Threading dinonaktifkan. Untuk informasi lebih lanjut, lihat Menyesuaikan opsi CPU.	2
TerminationGracePeriodSeconds	integer	Waktu buffer untuk program menangani operasi sebelum shutdown.	60
LoadBalancerWeight	integer	Bobot instans ECI sebagai server backend instans Server Load Balancer (SLB). Nilai yang valid: 1 hingga 100. Nilai default: 50.	50
DnsPolicy	string	Kebijakan DNS.	Default
HostName	string	Hostname.	hostname
EgressBandwidth	integer	Batas bandwidth keluar. Satuan: byte.	10485760
RegionId	string	ID wilayah grup penskalaan tempat aturan penskalaan berada.	cn-shanghai
RamRoleName	string	Nama peran RAM instans. ECI dan ECS berbagi peran RAM instans. Untuk informasi lebih lanjut, lihat Menggunakan peran RAM instans dengan memanggil operasi API.	ram:PassRole
Cpu	number	Jumlah vCPU pada tingkat instans. Satuan: core.	2.0
AutoMatchImageCache	boolean	Menunjukkan apakah cache image secara otomatis dicocokkan. Nilai default: false.	true
ResourceGroupId	string	ID grup sumber daya.	rg-acfmwozpmmksakq
ContainerGroupName	string	Nama instans grup container.	test
ScalingConfigurationId	string	ID konfigurasi penskalaan.	asc-2zec39vg84usxdocme6a
CpuOptionsCore	integer	Jumlah core CPU fisik. Hanya beberapa tipe instans yang mendukung pengaturan kustom.	2
SlsEnable	boolean	Menunjukkan apakah pengumpulan log pengguna diaktifkan. Nilai default: false.	false
Containers	array<object>	Daftar container yang termasuk dalam instans.
	array<object>	Daftar container yang termasuk dalam instans.
ReadinessProbeHttpGetPath	string	The path to which HTTP Get requests are sent when you use the HTTP requests to perform readiness probes.	/usr/local
ReadinessProbeSuccessThreshold	integer	The minimum number of consecutive successes before a failed readiness probe is considered successful. Default value: 1. Valid value: 1.	1
LivenessProbePeriodSeconds	integer	The interval at which liveness probes are performed. Unit: seconds. Default value: 10. Minimum value: 1.	5
LivenessProbeTcpSocketPort	integer	The port detected by TCP sockets when you use the TCP sockets to perform liveness probes.	80
LivenessProbeHttpGetScheme	string	The protocol type of HTTP GET requests when you use the HTTP requests to perform liveness probes. Valid values: HTTP HTTPS	HTTP
WorkingDir	string	The working directory in the container.	/usr/local/nginx
Tty	boolean	Specifies whether to enable the Interaction feature. Valid values: true false If the command is a /bin/bash command, the value of this parameter is true. Default value: false.	true
LivenessProbeHttpGetPort	integer	The port detected by HTTP Get requests when you use the HTTP requests to perform liveness probes.	8080
Gpu	integer	The number of GPUs.	2
ReadinessProbeInitialDelaySeconds	integer	The number of seconds that elapses from the startup of the container to the start time of a readiness probe.	5
Stdin	boolean	Indicates whether the container allocates buffer resources to standard input streams when the container is running. If this parameter is not specified, an end-of-file (EOF) error may occur when standard input streams in the container are read. Default value: false.	true
Memory	number	The memory size.	2.0
Name	string	The container name.	nginx
SecurityContextReadOnlyRootFilesystem	boolean	Indicates whether the root file system on which the container runs is read-only. Valid value: true.	true
LivenessProbeHttpGetPath	string	The path to which HTTP Get requests are sent when you use the HTTP requests to perform liveness probes.	/usr/nginx/
Image	string	The container image.	registry-vpc.aliyuncs.com/eci_open/alpine:3.5
ReadinessProbeTcpSocketPort	integer	The port detected by TCP sockets when you use the TCP sockets to perform readiness probes.	80
ReadinessProbeHttpGetScheme	string	The protocol type of HTTP GET requests when you use the HTTP requests to perform readiness probes. Valid values: HTTP HTTPS	HTTP
ReadinessProbeHttpGetPort	integer	The path to which HTTP Get requests are sent when you use the HTTP Get requests to perform readiness probes.	80
LivenessProbeSuccessThreshold	integer	The minimum number of consecutive successes before a failed liveness probe is considered successful. Default value: 1. Valid value: 1.	1
ReadinessProbeTimeoutSeconds	integer	The timeout period of a readiness probe. Default value: 1. Minimum value: 1. Unit: seconds.	5
SecurityContextRunAsUser	integer	The ID of the user that runs the entry point of the container process.	1000
LivenessProbeInitialDelaySeconds	integer	The number of seconds that elapses from the startup of the container to the start time of a liveness probe.	10
ReadinessProbePeriodSeconds	integer	The interval at which readiness probes are performed. Unit: seconds. Default value: 10. Minimum value: 1.	5
ImagePullPolicy	string	The image pulling policy.	Always
StdinOnce	boolean	Indicates whether standard input streams are disconnected after a client is disconnected. If Stdin is set to true, standard input streams remain connected among multiple sessions. If StdinOnce is set to true, standard input streams are connected after the container is started, and remain idle until a client is connected to receive data. After the client is disconnected, streams are also disconnected, and remain disconnected until the container restarts.	true
Cpu	number	The number of vCPUs that are allocated to the elastic container instance.	2
LivenessProbeTimeoutSeconds	integer	The timeout period of a liveness probe. Default value: 1. Minimum value: 1. Unit: seconds.	10
ReadinessProbeFailureThreshold	integer	The minimum number of consecutive failures before a successful readiness probe is considered failed. Default value: 3.	3
LivenessProbeFailureThreshold	integer	The minimum number of consecutive failures before a successful liveness probe is considered failed. Default value: 3.	3
Ports	array<object>	The exposed ports and protocols.
	object
Port	integer	The port number. Valid values: 1 to 65535.	8083
Protocol	string	The protocol type. Valid values: TCP UDP	TCP
VolumeMounts	array<object>	The volumes that are mounted to the container.
	object
ReadOnly	boolean	Indicates whether the volume is read-only. Default value: false.	true
SubPath	string	The subdirectory of the volume.	data2/
Name	string	The volume name.	default-volume1
MountPropagation	string	The mount propagation setting of the volume. Mount propagation enables volumes mounted on one container to be shared among other containers within the same pod or across distinct pods residing on the same node. Valid values: None: Subsequent mounts executed either on the volume itself or its subdirectories do not propagate to the already established volume mount. HostToCotainer: Subsequent mounts executed either on the volume itself or its subdirectories propagate to the already established volume mount. Bidirectional: This value is similar to HostToCotainer. Subsequent mounts executed either on the volume itself or its subdirectories propagate to the already established volume mount. In addition, any volume mounts executed on the container not only propagate back to the underlying host but also to all containers across every pod that uses the same volume. Default value: None.	None
MountPath	string	The directory in which the container mounts the volume. Catatan Data in this directory is overwritten by the data on the volume. Proceed with caution if you specify this parameter.	/pod/data
EnvironmentVars	array<object>	The environment variables.
	object
Key	string	The name of the environment variable.	PATH
Value	string	The value of the environment variable.	/usr/bin/
FieldRefFieldPath	string	Catatan This parameter is not available for use.	fieldPath
Commands	array	The container startup commands.
	string	The container startup command.	sleep
LivenessProbeExecCommands	array	The commands that are run in the container when you use a CLI to perform liveness probes.
	string	The command that is run in the container when you use a CLI to perform a liveness probe.	cat /tmp/healthy
Args	array	The arguments that are passed to the container startup commands.
	string	The argument that is passed to the container startup command.	100
ReadinessProbeExecCommands	array	The commands that are run in the container when you use a CLI to perform readiness probes.
	string	The command that is run in the container when you use a CLI to perform a readiness probe.	cat /tmp/healthy
SecurityContextCapabilityAdds	array	The permissions that are granted to the processes in the container. Valid values: NET_ADMIN and NET_RAW.
	string	The permission that is granted to the process in the container. Valid values: NET_ADMIN and NET_RAW.	NET_ADMIN
LifecyclePostStartHandlerHttpGetHost	string	The IP address of the host to the HTTP GET requests for configuring the postStart callback function are sent.	10.0.XX.XX
LifecyclePostStartHandlerHttpGetPort	integer	The port over which the HTTP GET requests for configuring the postStart callback function are sent.	80
LifecyclePostStartHandlerHttpGetPath	string	The path to the HTTP GET requests for configuring the postStart callback function are sent.	/healthyz
LifecyclePostStartHandlerHttpGetScheme	string	The protocol type of the HTTP Get requests that are used for configuring the postStart callback function.	HTTP
LifecyclePostStartHandlerExecs	array	The commands that are run by using a CLI for configuring the postStart callback function within the container.
	string	The command that is run by using a CLI for configuring the postStart callback function within the container.	["/bin/sh", "-c","echo Hello from the preStop handler > /usr/share/message"]
LifecyclePostStartHandlerTcpSocketHost	string	The IP address of the host detected by the TCP sockets that are used for configuring the postStart callback function.	10.0.XX.XX
LifecyclePostStartHandlerTcpSocketPort	integer	The port detected by the TCP sockets that are used for configuring the postStart callback function.	80
LifecyclePreStopHandlerHttpGetHost	string	The IP address of the host to which the HTTP GET requests for configuring the preStop callback function are sent.	10.0.XX.XX
LifecyclePreStopHandlerHttpGetPort	integer	The port over which the HTTP GET requests for configuring the preStop callback function are sent.	80
LifecyclePreStopHandlerHttpGetPath	string	The path to which the HTTP GET requests for configuring the preStop callback function are sent.	/healthyz
LifecyclePreStopHandlerHttpGetScheme	string	The protocol type of the HTTP Get requests that are used for configuring the preStop callback function.	HTTP
LifecyclePreStopHandlerExecs	array	The commands that are run by using a CLI for configuring the preStop callback function within the container.
	string	The command that is run by using a CLI for configuring the preStop callback function within the container.	["/bin/sh", "-c","echo Hello from the preStop handler > /usr/share/message"]
LifecyclePreStopHandlerTcpSocketHost	string	The IP address of the host detected by the TCP sockets that are used for configuring the preStop callback function.	10.0.XX.XX
LifecyclePreStopHandlerTcpSocketPort	integer	The port detected by the TCP sockets that are used for configuring the preStop callback function.	80
InitContainers	array<object>	Daftar init container.
	array<object>	Daftar init container.
SecurityContextReadOnlyRootFilesystem	boolean	Indicates whether the root file system on which the init container runs is read-only. Valid value: true.
ImagePullPolicy	string	The image pulling policy.	Always
WorkingDir	string	The working directory of the init container.	/www
Cpu	number	The number of vCPUs that are allocated to the init container.	0.5
Image	string	The image of the init container.	registry-vpc.cn-hongkong.aliyuncs.com/eci_open/nginx:alpine
Gpu	integer	The number of GPUs that are allocated to the init container.	1
SecurityContextRunAsUser	string	The ID of the user that runs the init container.	1000
Memory	number	The memory size of the init container.	1.0
Name	string	The name of the init container.	test-init
InitContainerEnvironmentVars	array<object>	The environment variables of the init container.
	object
Key	string	The name of the environment variable.	PATH
Value	string	The value of the environment variable.	/usr/local/bin
FieldRefFieldPath	string	Catatan This parameter is not available for use.	path
InitContainerPorts	array<object>	The ports of the init container.
	object
Port	integer	The port number. Valid values: 1 to 65535.	1024
Protocol	string	The protocol type. Valid values: TCP UDP	UDP
InitContainerVolumeMounts	array<object>	The volume mounts of the init container.
	object
ReadOnly	boolean	Indicates whether the mount directory is read-only. Default value: false.	false
SubPath	string	The subdirectory of the volume.	/usr/sub/
Name	string	The volume name.	test-empty
MountPropagation	string	The mount propagation setting of the volume. Mount propagation enables volumes mounted on one container to be shared among other containers within the same pod or across distinct pods residing on the same node. Valid values: None: Subsequent mounts executed either on the volume itself or its subdirectories do not propagate to the already established volume mount. HostToCotainer: Subsequent mounts executed either on the volume itself or its subdirectories propagate to the already established volume mount. Bidirectional: This value is similar to HostToCotainer. Subsequent mounts executed either on the volume itself or its subdirectories propagate to the already established volume mount. In addition, any volume mounts executed on the container not only propagate back to the underlying host but also to all containers across every pod that uses the same volume. Default value: None.	None
MountPath	string	The directory to which the init container mounts the volume. Catatan Data in this directory is overwritten by the data on the volume. Proceed with caution if you specify this parameter.	/usr/share/
SecurityContextCapabilityAdds	array	The permissions that are granted to the processes in the init container. Valid values: NET_ADMIN and NET_RAW.
	string	The permission that is granted to the process in the init container. Valid values: NET_ADMIN and NET_RAW. Catatan To use NET_RAW, you must submit a ticket.	NET_ADMIN
InitContainerCommands	array	The commands that are used to start the init container.
	string	The command that is used to start the init container.	sleep
InitContainerArgs	array	The arguments that are passed to the startup commands of the init container.
	string	The argument that is passed to the startup command of the init container.	10
Tags	array<object>	Pasangan kunci-nilai tag instans.
	object	Pasangan kunci-nilai tag instans.
Key	string	The tag key.	version
Value	string	The tag value.	3
Volumes	array<object>	Informasi volume.
	array<object>	Informasi volume.
Type	string	The volume type. Valid values: EmptyDirVolume NFSVolume ConfigFileVolume FlexVolume	EmptyDirVolume
DiskVolumeDiskId	string	The ID of the disk volume.	d-xx
DiskVolumeFsType	string	The system type of the disk volume.	xfs
EmptyDirVolumeMedium	string	The storage medium of the emptyDir volume. If you do not specify a storage medium for the emptyDir volume, the volume stores data in the file system of the node by default. We recommend that you set this parameter to memory. In this case, the emptyDir volume stores data in the specified memory.	memory
NFSVolumePath	string	The path to the Network File System (NFS) volume.	/share
DiskVolumeDiskSize	integer	The size of the disk volume. Unit: GiB.	15
NFSVolumeReadOnly	boolean	Indicates whether the NFS volume is read-only. Default value: false.	false
FlexVolumeFsType	string	The type of the mounted file system. The default value is determined by the script of FlexVolume.	ext4
ConfigFileVolumeDefaultMode	integer	The default permissions on the ConfigFile volume.	0644
FlexVolumeDriver	string	The name of the FlexVolume driver.	flexvolume
FlexVolumeOptions	string	The FlexVolume options.	{"volumeId":"d-2zehdahrwoa7srg****","performanceLevel": "PL2"}
NFSVolumeServer	string	The endpoint of the NFS server.	3f9cd4a596-naw76.cn-shanghai.nas.aliyuncs.com
Name	string	The volume name.	default-volume1
ConfigFileVolumeConfigFileToPaths	array<object>	The paths to the configuration files.
	object
Path	string	The path to the configuration file.	/usr/bin/
Mode	integer	The permissions on the ConfigFile volume.	0644
Content	string	The content of the configuration file.	bGl1bWk=
EmptyDirVolumeSizeLimit	string	The storage size of the emptyDir volume.	256Mi
HostPathVolumeType	string	The type of the HostPath volume.	Directory
HostPathVolumePath	string	The path to the HostPath volume on the host.	/pod/data
ImageRegistryCredentials	array<object>	Informasi registry image.
	object	Informasi registry image.
Password	string	The password of the image repository.	yourpaasword
Server	string	The domain name of the image repository.	registry-vpc.cn-shanghai.aliyuncs.com
UserName	string	The username of the image repository.	yourusername
DnsConfigOptions	array<object>	Opsi konfigurasi DNS.
	object	Opsi konfigurasi DNS.
Name	string	The variable name of the option.	name
Value	string	The variable value of the option.	value
HostAliases	array<object>	Pemetaan hostname kustom untuk container dalam instans.
	object	Pemetaan hostname kustom untuk container dalam instans.
Ip	string	The added IP address.	192.0.XX.XX
Hostnames	array	The added hostnames.
	string	The added hostname.	['hehe.com', 'haha.com']
SecurityContextSysCtls	array<object>	Informasi sistem dari konteks keamanan tempat instans berjalan.
	object	Nilai variabel dari konteks keamanan tempat instans berjalan.
Name	string	The system name of the security context in which the elastic container instance runs.	kernel.msgmax
Value	string	The variable value of the security context in which the elastic container instance runs.	65536
AcrRegistryInfos	array<object>	Informasi instans ACR Enterprise Edition.
	object	Informasi instans ACR Enterprise Edition.
InstanceId	string	The ID of the Container Registry Enterprise Edition instance.	cri-nwj395hgf6f3****
InstanceName	string	The name of the Container Registry Enterprise Edition instance.	acr-test
RegionId	string	The region ID of the Container Registry Enterprise Edition instance.	cn-hangzhou
Domains	array	The domain names of the Container Registry Enterprise Edition instance. By default, all domain names of the instance are displayed. Multiple domain names are separated by commas (,).
	string	The domain name of the Container Registry Enterprise Edition instance. By default, all domain names of the instance are displayed. Multiple domain names are separated by commas (,).	***-**-registry.cn-beijing.cr.aliyuncs.com
DnsConfigNameServers	array	Daftar alamat IP server DNS.
	string	Daftar alamat IP server DNS.	172.10..*
DnsConfigSearches	array	Daftar domain pencarian DNS.
	string	Daftar domain pencarian DNS.	svc.local.kubenetes
NtpServers	array	Server NTP.
	string	Server NTP.	ntp.cloud.aliyuncs.com
LifecycleState	string	Status konfigurasi penskalaan dalam grup penskalaan. Nilai yang valid: Active: konfigurasi penskalaan dalam status Active. Grup penskalaan menggunakan konfigurasi penskalaan aktif untuk membuat instans ECI secara otomatis. Inactive: konfigurasi penskalaan dalam status Inactive. Konfigurasi penskalaan dalam status Inactive ada di dalam grup penskalaan, tetapi grup penskalaan tidak menggunakannya untuk membuat instans ECI secara otomatis.	Active
CostOptimization	boolean	Menunjukkan apakah optimasi biaya diaktifkan. Nilai yang valid: true: diaktifkan. false: dinonaktifkan.	false
InstanceFamilyLevel	string	Tingkat keluarga instans, digunakan untuk memfilter rentang tipe instans yang memenuhi persyaratan. Parameter ini hanya berlaku saat `CostOptimization` diaktifkan. Nilai yang valid: EntryLevel: tipe instans bersama. Biaya lebih rendah tetapi tidak dapat menjamin performa komputasi yang stabil. Cocok untuk skenario dengan utilisasi CPU rendah. Untuk informasi lebih lanjut, lihat Keluarga instans bersama. EnterpriseLevel: tipe instans tingkat enterprise. Performa stabil dengan sumber daya khusus. Cocok untuk skenario dengan persyaratan stabilitas tinggi. Untuk informasi lebih lanjut, lihat Keluarga instans. CreditEntryLevel: tipe instans burstable. Menggunakan kredit CPU untuk memastikan performa komputasi. Cocok untuk skenario dengan utilisasi CPU yang biasanya rendah dan sesekali terjadi lonjakan. Untuk informasi lebih lanjut, lihat Ikhtisar instans burstable.	EnterpriseLevel
InstanceTypes	array	Tipe instans ECS yang ditentukan. Beberapa tipe didukung (hingga 5).
	string	Tipe instans ECS yang ditentukan. Anda dapat menentukan beberapa tipe (hingga 5). Untuk informasi lebih lanjut, lihat Membuat instans dengan tipe instans ECS yang ditentukan.	ecs.g6.large
DataCacheBucket	string	Bucket cache data.	default
DataCachePL	string	Tingkat performa cloud disk yang digunakan untuk cache data. Kami merekomendasikan Anda menggunakan cloud disk ESSD. Nilai yang valid untuk tingkat performa ESSD: PL0: IOPS baca/tulis acak maksimum 10.000 per disk. PL1: IOPS baca/tulis acak maksimum 50.000 per disk. PL2: IOPS baca/tulis acak maksimum 100.000 per disk. PL3: IOPS baca/tulis acak maksimum 1.000.000 per disk. Catatan Untuk informasi lebih lanjut tentang cloud disk ESSD, lihat Cloud disk ESSD.	PL1
DataCacheProvisionedIops	integer	IOPS baca/tulis yang disediakan dari cloud disk ESSD AutoPL saat cache data menggunakan cloud disk ESSD AutoPL. Nilai yang valid: 0 hingga min{50.000, 1.000 * kapasitas - performa dasar}, di mana performa dasar = min{1.800 + 50 * kapasitas, 50.000}. Catatan Untuk informasi lebih lanjut tentang cloud disk ESSD AutoPL, lihat Cloud disk ESSD AutoPL.	40000
DataCacheBurstingEnabled	boolean	Menunjukkan apakah burst (peningkatan performa) diaktifkan saat cache data menggunakan cloud disk ESSD AutoPL. Nilai yang valid: true: diaktifkan. false: dinonaktifkan. Nilai default: false. Catatan Untuk informasi lebih lanjut tentang cloud disk ESSD AutoPL, lihat Cloud disk ESSD AutoPL.	false
EipPublicIpAddressPoolId	string	ID pool alamat IP.	pippool-bp187arfugi543y1s****
EipCommonBandwidthPackage	string	Paket bandwidth bersama yang ada untuk diikat.	cbwp-bp1rxai1z4b1an454xl8m
EipISP	string	Tipe jalur EIP. Nilai yang valid: BGP (default): jalur BGP (multi-ISP). BGP_PRO: jalur premium BGP (multi-ISP).	BGP
ComputeCategory	array	Kategori komputasi. Jika diatur ke economy, ini menunjukkan kueri instans dengan spesifikasi ekonomis.
	string	Kategori komputasi yang ditentukan.	economy
Output	string	Konten output YAML dari konfigurasi penskalaan.	apiVersion: apps/v1 kind: Deployment metadata: name: nginx-deployment labels: app: nginx spec: replicas: 3 selector: matchLabels: app: nginx template: metadata: labels: app: nginx annotations: k8s.aliyun.com/eip-bandwidth: 10 k8s.aliyun.com/eci-with-eip: true spec: containers: - name: nginx image: nginx:1.14.2 ports: - containerPort: 80

Contoh

Respons sukses

JSONformat

{
  "RequestId": "6EF9BFEE-FE07-4627-B8FB-14326FB9****",
  "ScalingConfiguration": {
    "CreationTime": "2023-05-10T02:39:15Z",
    "ScalingConfigurationName": "scalingconfi****",
    "SecurityGroupId": "sg-bp18kz60mefs****",
    "ActiveDeadlineSeconds": 60,
    "SpotStrategy": "NoSpot",
    "AutoCreateEip": true,
    "ScalingGroupId": "asg-bp1frlu04fq4zv65b1bh",
    "EphemeralStorage": 20,
    "Ipv6AddressCount": 1,
    "Description": "This is an example.",
    "EipBandwidth": 5,
    "ImageSnapshotId": "imc-2zebxkiifuyzzlhl****",
    "Memory": 4,
    "RestartPolicy": "Always",
    "SpotPriceLimit": 0.025,
    "IngressBandwidth": 1024000,
    "CpuOptionsThreadsPerCore": 2,
    "TerminationGracePeriodSeconds": 60,
    "LoadBalancerWeight": 50,
    "DnsPolicy": "Default",
    "HostName": "hostname",
    "EgressBandwidth": 10485760,
    "RegionId": "cn-shanghai",
    "RamRoleName": "ram:PassRole\n",
    "Cpu": 2,
    "AutoMatchImageCache": true,
    "ResourceGroupId": "rg-acfmwozpmmksakq",
    "ContainerGroupName": "test",
    "ScalingConfigurationId": "asc-2zec39vg84usxdocme6a",
    "CpuOptionsCore": 2,
    "SlsEnable": false,
    "Containers": [
      {
        "ReadinessProbeHttpGetPath": "/usr/local",
        "ReadinessProbeSuccessThreshold": 1,
        "LivenessProbePeriodSeconds": 5,
        "LivenessProbeTcpSocketPort": 80,
        "LivenessProbeHttpGetScheme": "HTTP",
        "WorkingDir": "/usr/local/nginx",
        "Tty": true,
        "LivenessProbeHttpGetPort": 8080,
        "Gpu": 2,
        "ReadinessProbeInitialDelaySeconds": 5,
        "Stdin": true,
        "Memory": 2,
        "Name": "nginx",
        "SecurityContextReadOnlyRootFilesystem": true,
        "LivenessProbeHttpGetPath": "/usr/nginx/\n",
        "Image": "registry-vpc.aliyuncs.com/eci_open/alpine:3.5",
        "ReadinessProbeTcpSocketPort": 80,
        "ReadinessProbeHttpGetScheme": "HTTP",
        "ReadinessProbeHttpGetPort": 80,
        "LivenessProbeSuccessThreshold": 1,
        "ReadinessProbeTimeoutSeconds": 5,
        "SecurityContextRunAsUser": 1000,
        "LivenessProbeInitialDelaySeconds": 10,
        "ReadinessProbePeriodSeconds": 5,
        "ImagePullPolicy": "Always",
        "StdinOnce": true,
        "Cpu": 2,
        "LivenessProbeTimeoutSeconds": 10,
        "ReadinessProbeFailureThreshold": 3,
        "LivenessProbeFailureThreshold": 3,
        "Ports": [
          {
            "Port": 8083,
            "Protocol": "TCP"
          }
        ],
        "VolumeMounts": [
          {
            "ReadOnly": true,
            "SubPath": "data2/\n",
            "Name": "default-volume1",
            "MountPropagation": "None",
            "MountPath": "/pod/data"
          }
        ],
        "EnvironmentVars": [
          {
            "Key": "PATH",
            "Value": "/usr/bin/\n",
            "FieldRefFieldPath": "fieldPath"
          }
        ],
        "Commands": [
          "sleep"
        ],
        "LivenessProbeExecCommands": [
          "cat /tmp/healthy"
        ],
        "Args": [
          "100"
        ],
        "ReadinessProbeExecCommands": [
          "cat /tmp/healthy\n"
        ],
        "SecurityContextCapabilityAdds": [
          "NET_ADMIN"
        ],
        "LifecyclePostStartHandlerHttpGetHost": "10.0.XX.XX",
        "LifecyclePostStartHandlerHttpGetPort": 80,
        "LifecyclePostStartHandlerHttpGetPath": "/healthyz\n",
        "LifecyclePostStartHandlerHttpGetScheme": "HTTP",
        "LifecyclePostStartHandlerExecs": [
          "[\"/bin/sh\", \"-c\",\"echo Hello from the preStop handler > /usr/share/message\"]"
        ],
        "LifecyclePostStartHandlerTcpSocketHost": "10.0.XX.XX\n",
        "LifecyclePostStartHandlerTcpSocketPort": 80,
        "LifecyclePreStopHandlerHttpGetHost": "10.0.XX.XX\n",
        "LifecyclePreStopHandlerHttpGetPort": 80,
        "LifecyclePreStopHandlerHttpGetPath": "/healthyz",
        "LifecyclePreStopHandlerHttpGetScheme": "HTTP",
        "LifecyclePreStopHandlerExecs": [
          "[\"/bin/sh\", \"-c\",\"echo Hello from the preStop handler > /usr/share/message\"]"
        ],
        "LifecyclePreStopHandlerTcpSocketHost": "10.0.XX.XX",
        "LifecyclePreStopHandlerTcpSocketPort": 80
      }
    ],
    "InitContainers": [
      {
        "SecurityContextReadOnlyRootFilesystem": true,
        "ImagePullPolicy": "Always",
        "WorkingDir": "/www",
        "Cpu": 0.5,
        "Image": "registry-vpc.cn-hongkong.aliyuncs.com/eci_open/nginx:alpine",
        "Gpu": 1,
        "SecurityContextRunAsUser": "1000",
        "Memory": 1,
        "Name": "test-init\n",
        "InitContainerEnvironmentVars": [
          {
            "Key": "PATH",
            "Value": "/usr/local/bin\n",
            "FieldRefFieldPath": "path"
          }
        ],
        "InitContainerPorts": [
          {
            "Port": 1024,
            "Protocol": "UDP"
          }
        ],
        "InitContainerVolumeMounts": [
          {
            "ReadOnly": false,
            "SubPath": "/usr/sub/",
            "Name": "test-empty\n",
            "MountPropagation": "None",
            "MountPath": "/usr/share/\n"
          }
        ],
        "SecurityContextCapabilityAdds": [
          "NET_ADMIN"
        ],
        "InitContainerCommands": [
          "sleep"
        ],
        "InitContainerArgs": [
          "10"
        ]
      }
    ],
    "Tags": [
      {
        "Key": "version",
        "Value": "3"
      }
    ],
    "Volumes": [
      {
        "Type": "EmptyDirVolume",
        "DiskVolumeDiskId": "d-xx",
        "DiskVolumeFsType": "xfs",
        "EmptyDirVolumeMedium": "memory",
        "NFSVolumePath": "/share\n",
        "DiskVolumeDiskSize": 15,
        "NFSVolumeReadOnly": false,
        "FlexVolumeFsType": "ext4",
        "ConfigFileVolumeDefaultMode": 644,
        "FlexVolumeDriver": "flexvolume",
        "FlexVolumeOptions": "{\"volumeId\":\"d-2zehdahrwoa7srg****\",\"performanceLevel\": \"PL2\"}\n",
        "NFSVolumeServer": "3f9cd4a596-naw76.cn-shanghai.nas.aliyuncs.com\n",
        "Name": "default-volume1\n",
        "ConfigFileVolumeConfigFileToPaths": [
          {
            "Path": "/usr/bin/\n",
            "Mode": 644,
            "Content": "bGl1bWk=\n"
          }
        ],
        "EmptyDirVolumeSizeLimit": "256Mi",
        "HostPathVolumeType": "Directory",
        "HostPathVolumePath": "/pod/data\n"
      }
    ],
    "ImageRegistryCredentials": [
      {
        "Password": "yourpaasword",
        "Server": "registry-vpc.cn-shanghai.aliyuncs.com\n",
        "UserName": "yourusername"
      }
    ],
    "DnsConfigOptions": [
      {
        "Name": "name",
        "Value": "value"
      }
    ],
    "HostAliases": [
      {
        "Ip": "192.0.XX.XX\n",
        "Hostnames": [
          "['hehe.com', 'haha.com']\n"
        ]
      }
    ],
    "SecurityContextSysCtls": [
      {
        "Name": "kernel.msgmax\n",
        "Value": "65536"
      }
    ],
    "AcrRegistryInfos": [
      {
        "InstanceId": "cri-nwj395hgf6f3****\n",
        "InstanceName": "acr-test\n",
        "RegionId": "cn-hangzhou\n",
        "Domains": [
          "*****-****-registry.cn-beijing.cr.aliyuncs.com\n"
        ]
      }
    ],
    "DnsConfigNameServers": [
      "172.10.*.**\n"
    ],
    "DnsConfigSearches": [
      "svc.local.kubenetes\n"
    ],
    "NtpServers": [
      "ntp.cloud.aliyuncs.com\n"
    ],
    "LifecycleState": "Active",
    "CostOptimization": false,
    "InstanceFamilyLevel": "EnterpriseLevel",
    "InstanceTypes": [
      "ecs.g6.large\n"
    ],
    "DataCacheBucket": "default",
    "DataCachePL": "PL1\n",
    "DataCacheProvisionedIops": 40000,
    "DataCacheBurstingEnabled": false,
    "EipPublicIpAddressPoolId": "pippool-bp187arfugi543y1s****",
    "EipCommonBandwidthPackage": "cbwp-bp1rxai1z4b1an454xl8m",
    "EipISP": "BGP",
    "ComputeCategory": [
      "economy"
    ]
  },
  "Output": "apiVersion: apps/v1\nkind: Deployment\nmetadata:\n  name: nginx-deployment\n  labels:\n    app: nginx\n  spec:\n    replicas: 3\n    selector:\n       matchLabels:\n        app: nginx\n    template:\n      metadata:\n        labels:\n          app: nginx\n        annotations:\n          k8s.aliyun.com/eip-bandwidth: 10\n          k8s.aliyun.com/eci-with-eip: true\n        spec:\n          containers:\n          - name: nginx\n            image: nginx:1.14.2\n            ports:\n            - containerPort: 80"
}

Kode kesalahan

HTTP status code	Error code	Error message	Description
403	Forbidden.RiskControl	Forbidden.RiskControl

Lihat Error Codes untuk daftar lengkap.

Catatan rilis

Lihat Release Notes untuk daftar lengkap.