ALIYUN::HBR::Vault - Create HBR Backup Vault - Resource Orchestration Service

Syntaxe

{
  "Type": "ALIYUN::HBR::Vault",
  "Properties": {
    "VaultType": String,
    "Description": String,
    "EncryptType": String,
    "ResourceGroupId": String,
    "KmsKeyId": String,
    "VaultName": String,
    "RedundancyType": String,
    "VaultStorageClass": String,
    "Tags": List
  }
}

Propriétés

Propriété	Type	Obligatoire	Modifiable	Description	Contrainte
VaultType	String	Oui	Non	Le type du coffre.	Valeurs valides : STANDARD : Coffre de sauvegarde standard. OTS_BACKUP : Coffre de sauvegarde Tablestore.
Description	String	Non	Oui	La description du coffre.	Jusqu'à 255 caractères.
EncryptType	String	Non	Non	La méthode de chiffrement des données source.	Valeurs valides : HBR_PRIVATE : Chiffrement natif HBR. KMS : Chiffrement avec une clé KMS personnalisée. S'applique uniquement lorsque VaultType est STANDARD ou OTS_BACKUP.
ResourceGroupId	String	Non	Oui	L'ID du groupe de ressources.	Aucune.
KmsKeyId	String	Non	Non	L'ID ou l'alias de la clé KMS.	Obligatoire si EncryptType est défini sur KMS.
VaultName	String	Oui	Oui	Le nom du coffre.	De 1 à 64 caractères.
RedundancyType	String	Non	Non	Le type de redondance des données.	Valeurs valides : LRS : Stockage localement redondant. HBR conserve des copies de chaque objet sur plusieurs appareils appartenant à différentes infrastructures au sein de la même zone, afin de garantir la durabilité et la disponibilité des données. ZRS : Stockage redondant inter-zones. HBR répartit les données sur trois zones au sein de la même région. En cas de défaillance d'une zone, les données stockées dans les deux autres zones restent accessibles.
VaultStorageClass	String	Non	Non	La classe de stockage du coffre.	Seule la valeur STANDARD (stockage standard) est prise en charge.
Tags	List	Non	Oui	Les tags associés au coffre.	Jusqu'à 20 tags.

Syntaxe des tags

"Tags": [
  {
    "Value": String,
    "Key": String
  }
]

Propriétés des tags

Propriété	Type	Obligatoire	Modifiable	Description	Contrainte
Value	String	Non	Non	La valeur du tag.	Jusqu'à 128 caractères. Ne doit pas contenir `http://` ni `https://`. Ne doit pas commencer par `aliyun` ou `acs:`.
Key	String	Oui	Non	La clé du tag.	De 1 à 128 caractères. Ne doit pas contenir http:// ni https://. Ne doit pas commencer par aliyun ou acs:.

Valeurs de retour

Fn::GetAtt

Description : La description du coffre.
ResourceGroupId : L'ID du groupe de ressources.
TrialInfo : Les informations relatives à l'essai gratuit.
ReplicationSourceRegionId : L'ID de la région du coffre source.
IndexUpdateTime : L'horodatage de la dernière mise à jour de l'index.
VaultId : L'ID du coffre.
Retention : La période de rétention du coffre.
Dedup : Indique si la déduplication est activée.
VaultStatusMessage : Le message d'état renvoyé lorsque le coffre est dans l'état ERROR.
BytesDone : La quantité de données sauvegardées, exprimée en octets.
ReplicationProgress : La progression de la synchronisation des données vers le coffre miroir.
PaymentType : La méthode de facturation du coffre.
BackupPlanStatistics : Les statistiques des plans de sauvegarde utilisant ce coffre.
Tags : Les tags associés au coffre.
VaultName : Le nom du coffre.
RedundancyType : Le type de redondance des données du coffre.
VaultStorageClass : La classe de stockage du coffre.
CreateTime : L'heure de création du coffre, sous forme d'horodatage UNIX en secondes.
StorageSize : L'espace de stockage utilisé par le coffre, exprimé en octets.
ReplicationSourceVaultId : L'ID du coffre source.
VaultType : Le type du coffre.
LatestReplicationTime : L'horodatage de la dernière sauvegarde distante réussie.
Replication : Indique s'il s'agit d'un coffre de sauvegarde distant.
IndexLevel : Le niveau d'indexation.
UpdatedTime : L'heure de mise à jour du coffre.
SourceTypes : Les types de sources de données.
IndexAvailable : Indique si les index sont disponibles.
SearchEnabled : Indique si la recherche dans les sauvegardes est activée.

Exemples

YAML format

ROSTemplateFormatVersion: '2015-09-01'
Parameters:
  VaultName:
    Description: The name of the backup vault. The name must be 1 to 64 characters
      in length.
    MaxLength: 64
    MinLength: 1
    Type: String
    Default: test-valut
Resources:
  ExtensionResource:
    Properties:
      VaultName:
        Ref: VaultName
      VaultType: STANDARD
    Type: ALIYUN::HBR::Vault
Outputs:
  BackupPlanStatistics:
    Description: The statistics of backup plans that use the backup vault.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - BackupPlanStatistics
  BytesDone:
    Description: 'The amount of data that is backed up. Unit: bytes.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - BytesDone
  CreateTime:
    Description: 'The time when the backup vault was created. This value is a UNIX
      timestamp. Unit: seconds.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - CreateTime
  Dedup:
    Description: Indicates whether the deduplication feature is enabled.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - Dedup
  Description:
    Description: The description of the backup vault.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - Description
  IndexAvailable:
    Description: Indicates whether indexes are available. Indexes are available when
      they are not being updated.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - IndexAvailable
  IndexLevel:
    Description: 'The index level.

      - **OFF**: No indexes are created.

      - **META**: Metadata indexes are created.

      - **ALL**: Full-text indexes are created.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - IndexLevel
  IndexUpdateTime:
    Description: The time when the index was updated.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - IndexUpdateTime
  LatestReplicationTime:
    Description: 'The time when the last remote backup was synchronized. This value
      is a UNIX timestamp. Unit: seconds.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - LatestReplicationTime
  PaymentType:
    Description: PaymentType.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - PaymentType
  RedundancyType:
    Description: 'The data redundancy type of the backup vault. Valid values:

      - **LRS**: Locally redundant storage (LRS) is enabled for the backup vault.
      HBR stores the copies of each object on multiple devices of different facilities
      in the same zone. This way, HBR ensures data durability and availability even
      if hardware failures occur.

      - **ZRS**: Zone-redundant storage (ZRS) is enabled for the backup vault. HBR
      uses the multi-zone mechanism to distribute data across three zones within the
      same region. If a zone fails, the data that is stored in the other two zones
      is still accessible.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - RedundancyType
  Replication:
    Description: 'Indicates whether the backup vault is a remote backup vault. Valid
      values:

      - **true**: The backup vault is a remote backup vault.

      - **false**: The backup vault is an on-premises backup vault.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - Replication
  ReplicationProgress:
    Description: The progress of data synchronization from the backup vault to the
      mirror vault.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - ReplicationProgress
  ReplicationSourceRegionId:
    Description: The ID of the region where the remote backup vault resides.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - ReplicationSourceRegionId
  ReplicationSourceVaultId:
    Description: The ID of the source vault that corresponds to the remote backup
      vault.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - ReplicationSourceVaultId
  ResourceGroupId:
    Description: The ID of the resource group.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - ResourceGroupId
  Retention:
    Description: 'The retention period of the backup vault. Unit: days.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - Retention
  SearchEnabled:
    Description: Indicates whether the backup search feature is enabled.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - SearchEnabled
  SourceTypes:
    Description: The information about the data source.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - SourceTypes
  StorageSize:
    Description: 'The usage of the backup vault. Unit: bytes.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - StorageSize
  Tags:
    Description: The tags of the backup vault.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - Tags
  TrialInfo:
    Description: The free trial information.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - TrialInfo
  UpdatedTime:
    Description: 'The time when the backup vault was updated. This value is a UNIX
      timestamp. Unit: seconds.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - UpdatedTime
  VaultId:
    Description: The ID of the backup vault.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - VaultId
  VaultName:
    Description: The name of the backup vault.
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - VaultName
  VaultStatusMessage:
    Description: 'The status message that is returned when the backup vault is in
      the ERROR state. This parameter is available only for remote backup vaults.
      Valid values:

      - **UNKNOWN_ERROR*: An unknown error occurs.

      - **SOURCE_VAULT_ALREADY_HAS_REPLICATION**: A mirror vault is configured for
      the source vault.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - VaultStatusMessage
  VaultStorageClass:
    Description: 'The storage type of the backup vault. Valid value: **STANDARD**,
      which indicates standard storage.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - VaultStorageClass
  VaultType:
    Description: 'The type of the backup vault. Valid value: **STANDARD**, which indicates
      a standard backup vault.'
    Value:
      Fn::GetAtt:
      - ExtensionResource
      - VaultType

JSON format

{
  "ROSTemplateFormatVersion": "2015-09-01",
  "Parameters": {
    "VaultName": {
      "Description": "The name of the backup vault. The name must be 1 to 64 characters in length.",
      "MaxLength": 64,
      "MinLength": 1,
      "Type": "String",
      "Default": "test-valut"
    }
  },
  "Resources": {
    "ExtensionResource": {
      "Properties": {
        "VaultName": {
          "Ref": "VaultName"
        },
        "VaultType": "STANDARD"
      },
      "Type": "ALIYUN::HBR::Vault"
    }
  },
  "Outputs": {
    "BackupPlanStatistics": {
      "Description": "The statistics of backup plans that use the backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "BackupPlanStatistics"
        ]
      }
    },
    "BytesDone": {
      "Description": "The amount of data that is backed up. Unit: bytes.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "BytesDone"
        ]
      }
    },
    "CreateTime": {
      "Description": "The time when the backup vault was created. This value is a UNIX timestamp. Unit: seconds.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "CreateTime"
        ]
      }
    },
    "Dedup": {
      "Description": "Indicates whether the deduplication feature is enabled.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "Dedup"
        ]
      }
    },
    "Description": {
      "Description": "The description of the backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "Description"
        ]
      }
    },
    "IndexAvailable": {
      "Description": "Indicates whether indexes are available. Indexes are available when they are not being updated.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "IndexAvailable"
        ]
      }
    },
    "IndexLevel": {
      "Description": "The index level.\n- **OFF**: No indexes are created.\n- **META**: Metadata indexes are created.\n- **ALL**: Full-text indexes are created.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "IndexLevel"
        ]
      }
    },
    "IndexUpdateTime": {
      "Description": "The time when the index was updated.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "IndexUpdateTime"
        ]
      }
    },
    "LatestReplicationTime": {
      "Description": "The time when the last remote backup was synchronized. This value is a UNIX timestamp. Unit: seconds.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "LatestReplicationTime"
        ]
      }
    },
    "PaymentType": {
      "Description": "PaymentType.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "PaymentType"
        ]
      }
    },
    "RedundancyType": {
      "Description": "The data redundancy type of the backup vault. Valid values:\n- **LRS**: Locally redundant storage (LRS) is enabled for the backup vault. HBR stores the copies of each object on multiple devices of different facilities in the same zone. This way, HBR ensures data durability and availability even if hardware failures occur.\n- **ZRS**: Zone-redundant storage (ZRS) is enabled for the backup vault. HBR uses the multi-zone mechanism to distribute data across three zones within the same region. If a zone fails, the data that is stored in the other two zones is still accessible.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "RedundancyType"
        ]
      }
    },
    "Replication": {
      "Description": "Indicates whether the backup vault is a remote backup vault. Valid values:\n- **true**: The backup vault is a remote backup vault.\n- **false**: The backup vault is an on-premises backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "Replication"
        ]
      }
    },
    "ReplicationProgress": {
      "Description": "The progress of data synchronization from the backup vault to the mirror vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "ReplicationProgress"
        ]
      }
    },
    "ReplicationSourceRegionId": {
      "Description": "The ID of the region where the remote backup vault resides.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "ReplicationSourceRegionId"
        ]
      }
    },
    "ReplicationSourceVaultId": {
      "Description": "The ID of the source vault that corresponds to the remote backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "ReplicationSourceVaultId"
        ]
      }
    },
    "ResourceGroupId": {
      "Description": "The ID of the resource group.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "ResourceGroupId"
        ]
      }
    },
    "Retention": {
      "Description": "The retention period of the backup vault. Unit: days.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "Retention"
        ]
      }
    },
    "SearchEnabled": {
      "Description": "Indicates whether the backup search feature is enabled.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "SearchEnabled"
        ]
      }
    },
    "SourceTypes": {
      "Description": "The information about the data source.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "SourceTypes"
        ]
      }
    },
    "StorageSize": {
      "Description": "The usage of the backup vault. Unit: bytes.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "StorageSize"
        ]
      }
    },
    "Tags": {
      "Description": "The tags of the backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "Tags"
        ]
      }
    },
    "TrialInfo": {
      "Description": "The free trial information.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "TrialInfo"
        ]
      }
    },
    "UpdatedTime": {
      "Description": "The time when the backup vault was updated. This value is a UNIX timestamp. Unit: seconds.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "UpdatedTime"
        ]
      }
    },
    "VaultId": {
      "Description": "The ID of the backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "VaultId"
        ]
      }
    },
    "VaultName": {
      "Description": "The name of the backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "VaultName"
        ]
      }
    },
    "VaultStatusMessage": {
      "Description": "The status message that is returned when the backup vault is in the ERROR state. This parameter is available only for remote backup vaults. Valid values:\n- **UNKNOWN_ERROR*: An unknown error occurs.\n- **SOURCE_VAULT_ALREADY_HAS_REPLICATION**: A mirror vault is configured for the source vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "VaultStatusMessage"
        ]
      }
    },
    "VaultStorageClass": {
      "Description": "The storage type of the backup vault. Valid value: **STANDARD**, which indicates standard storage.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "VaultStorageClass"
        ]
      }
    },
    "VaultType": {
      "Description": "The type of the backup vault. Valid value: **STANDARD**, which indicates a standard backup vault.",
      "Value": {
        "Fn::GetAtt": [
          "ExtensionResource",
          "VaultType"
        ]
      }
    }
  }
}