Container Service for Kubernetes:Accelerate Jobs

Limits

This feature is mutually exclusive with the elastic scheduling feature of ACK. For more information about the elastic scheduling feature of ACK, see Enable the virtual node-based pod scheduling policy for an ACK cluster.

Deploy the control plane components of Fluid

1. Deploy the control plane components of Fluid.

   1. Log on to the ACK console. In the left-side navigation pane, click Clusters.

   2. On the Clusters page, click the name of the cluster that you want to manage and choose Applications > Helm in the left-side navigation pane.

   3. On the Helm page, click Deploy.

   4. On the Basic Information wizard page, configure the parameters and click Next.

      The following table describes some parameters that are displayed.

      Parameter	Description
      Source	Select Marketplace.
      Chart	Find and click ack-fluid.

      Note

      The default release name for the ack-fluid chart is ack-fluid. The default namespace for the ack-fluid chart is fluid-system. Click Next. If the actual release name and namespace for the ack-fluid chart are different from the default release name and default namespace, the Confirm message appears. Click Yes to use the default release name and default namespace.

   5. On the Parameters wizard page, click OK.

2. Run the following command to check whether Fluid is deployed:

   kubectl get pod -n fluid-system

   Expected output:

   NAME                                  READY   STATUS    RESTARTS   AGE
   dataset-controller-d99998f79-dgkmh    1/1     Running   0          2m48s
   fluid-webhook-55c6d9d497-dmrzb        1/1     Running   0          2m49s

   The output indicates that Fluid is deployed. The following content describes the control plane components of Fluid:

   • Dataset Controller: manages the lifecycle of the Dataset objects that are referenced by Fluid. Dataset objects are custom resource (CR) objects.

   • Fluid Webhook: performs sidecar injection on pods that need to access data. This makes data access transparent to users in serverless scenarios.

   Note

   In addition to the preceding components, the control plane of Fluid also includes controllers that are used to manage the lifecycle of cache runtimes, such as the JindoFS runtime, JuiceFS runtime, and Alluxio runtime. The controllers corresponding to a cache runtime are deployed only after the cache runtime is used.

Examples of accelerating data access in an ACK Serverless cluster

Step 1: Upload the test dataset to the OSS bucket

1. Create a test dataset of 2 GB in size. In this example, the test dataset is used.

2. Upload the test dataset to the OSS bucket that you created.

   You can use the ossutil tool provided by OSS to upload data. For more information, see Install ossutil.

Step 2: Create a Dataset object and a Runtime object

1. Run the following command to create a Secret that stores the credentials used to access the OSS bucket.

   kubectl create secret generic oss-access-key \
     --from-literal=fs.oss.accessKeyId=<access_key_id> \
     --from-literal=fs.oss.accessKeySecret=<access_key_secret>

2. Create a file named dataset.yaml and copy the following content to the file. The file is used to create a Dataset object and a Runtime object.

   In this topic, the JindoRuntime is used to interface with JindoFS.

   apiVersion: data.fluid.io/v1alpha1
   kind: Dataset
   metadata:
     name: demo-dataset
   spec:
     mounts:
       - mountPoint: oss://<bucket_name>/<bucket_path>
         name: demo
         path: /
         options:
           fs.oss.endpoint: oss-<region>.aliyuncs.com # The endpoint of the OSS bucket. 
         encryptOptions:
           - name: fs.oss.accessKeyId
             valueFrom:
               secretKeyRef:
                 name: oss-access-key
                 key: fs.oss.accessKeyId
           - name: fs.oss.accessKeySecret
             valueFrom:
               secretKeyRef:
                 name: oss-access-key
                 key: fs.oss.accessKeySecret
   ---
   apiVersion: data.fluid.io/v1alpha1
   kind: JindoRuntime
   metadata:
     name: demo-dataset
   spec:
     # The number of worker pods to be created in the JindoFS cluster. 
     replicas: 2
     worker:
       podMetadata:
         annotations:
           # Disable the virtual node-based pod scheduling policy. 
           alibabacloud.com/burst-resource: eci_only
           # The type of instance that is used to run the worker pods. 
           k8s.aliyun.com/eci-use-specs: <eci_instance_spec>
           # Use an image cache to accelerate pod creation. 
           k8s.aliyun.com/eci-image-cache: "true"
     tieredstore:
       levels:
         # Specify 10 GiB of memory as the cache for each worker pod. 
         - mediumtype: MEM
           volumeType: emptyDir
           path: /dev/shm
           quota: 10Gi
           high: "0.99"
           low: "0.99"

   The following table describes some parameters that are displayed.

   Parameter	Description
   mountPoint	The path to which the UFS is mounted. The format of the path is oss://<oss_bucket>/<bucket_dir>. Do not include endpoint information in the path. If you use only one mount point, you can set path to /.
   options	Information about the endpoint of the OSS bucket. You can specify a public or internal endpoint.
   fs.oss.endpoint	The public or internal endpoint of the OSS bucket. You can specify the internal endpoint of the bucket to enhance data security. However, if you specify the internal endpoint, make sure that your cluster is deployed in the region where OSS is activated. For example, if your OSS bucket is created in the China (Hangzhou) region, the public endpoint of the bucket is oss-cn-hangzhou.aliyuncs.com and the internal endpoint is oss-cn-hangzhou-internal.aliyuncs.com.
   fs.oss.accessKeyId	The AccessKey ID that is used to access the bucket.
   fs.oss.accessKeySecret	The AccessKey secret that is used to access the bucket.
   replicas	The number of worker pods that are created by the JindoRuntime. This parameter determines the maximum cache size that can be provided by the distributed cache runtime.
   worker.podMetadata.annotations	You can specify an instance type and an image cache.
   tieredstore.levels	You can use the quota field to specify the maximum size of the cache used by each worker pod.
   tieredstore.levels.mediumtype	The cache type. This parameter specifies the type of cache that is used. Valid values: HDD, SSD, and MEM.
   tieredstore.levels.path	The path of the cache. You can specify only one path.
   tieredstore.levels.quota	The maximum cache size. For example, a value of 100 Gi indicates that the maximum cache size is 100 GiB.
   tieredstore.levels.high	The upper limit of the storage.
   tieredstore.levels.low	The lower limit of the storage.

3. Run the following commands to create a Dataset object and a JindoRuntime object:

   kubectl create -f dataset.yaml

4. Run the following command to check whether the Dataset object is created.

   It requires 1 to 2 minutes to create the Dataset object and the JindoRuntime object. After the objects are created, you can query information about the cache system and cached data.

   kubectl get dataset demo-dataset

   Expected output:

   NAME           UFS TOTAL SIZE   CACHED   CACHE CAPACITY   CACHED PERCENTAGE   PHASE   AGE
   demo-dataset   1.16GiB          0.00B    20.00GiB         0.0%                Bound   2m58s

   The output shows information about the Dataset object that you created in Fluid. The following table describes the parameters in the output.

   Parameter	Description
   UFS TOTAL SIZE	The size of the dataset that is uploaded to OSS.
   CACHED	The size of the cached data.
   CACHE CAPACITY	The total cache size.
   CACHED PERCENTAGE	The percentage of the cached data in the dataset.
   PHASE	The status of the Dataset object. If the value is Bound, the Dataset object is created.

(Optional) Step 3: Preheat data

Prefetching can efficiently accelerate first-time data access. We recommend that you use this feature if this is the first time you retrieve data.

1. Create a file named dataload.yaml based on the following content:

   apiVersion: data.fluid.io/v1alpha1
   kind: DataLoad
   metadata:
     name: data-warmup
   spec:
     dataset:
       name: demo-dataset
       namespace: default
     loadMetadata: true

2. Run the following command to create a DataLoad object:

   kubectl create -f dataload.yaml

   Expected output:

   NAME          DATASET        PHASE      AGE   DURATION
   data-warmup   demo-dataset   Complete   99s   58s

   The output shows that the duration of data prefetching is 58 seconds.

Step 4: Create a Job to test data access acceleration

You can create applications to test whether data access is accelerated by JindoFS, or submit machine learning Jobs to use relevant features. This section describes how to use a Job to access the data stored in OSS.

1. Create a file named job.yaml and copy the following content to the file:

   apiVersion: batch/v1
   kind: Job
   metadata:
     name: demo-app
   spec:
     template:
       metadata:
         labels:
           alibabacloud.com/fluid-sidecar-target: eci
         annotations:
           # Disable the virtual node-based pod scheduling policy. 
           alibabacloud.com/burst-resource: eci_only
           # Select an instance type for pods. 
           k8s.aliyun.com/eci-use-specs: ecs.g7.4xlarge
       spec:
         containers:
           - name: demo
             image: debian:buster
             args:
               - -c
               - du -sh /data && time cp -r /data/ /tmp
             command:
               - /bin/bash
             volumeMounts:
               - mountPath: /data
                 name: demo
         restartPolicy: Never
         volumes:
           - name: demo
             persistentVolumeClaim:
               claimName: demo-dataset
     backoffLimit: 4

2. Run the following command to create a Job:

   kubectl create -f job.yaml

3. Run the following command to query the boot log of the pod created by the Job:

   kubectl logs demo-app-jwktf -c demo

   Expected output:

   1.2G    /data
   
   real    0m0.992s
   user    0m0.004s
   sys     0m0.674s

   The real field in the output shows that it took 0.992 seconds (0m0.992s) to replicate the file.

Step 5: Clear data

After you test data access acceleration, clear the relevant data at the earliest opportunity.

1. Run the following command to delete the pods of the Job:

   kubectl delete job demo-app

2. Run the following command to delete the Dataset object and the components corresponding to the caching runtime.

   kubectl delete dataset demo-dataset

   Important

   It requires about 1 minute to delete the components. Before you perform the following step, make sure that the components are deleted.

3. Run the following command to delete the control plane components of Fluid:

   kubectl get deployments.apps -n fluid-system | awk 'NR>1 {print $1}' | xargs kubectl scale deployments -n fluid-system --replicas=0

   To enable data access acceleration again, you must run the following command to create the control plane components of Fluid before you create a Dataset object and a Runtime object:

   kubectl scale -n fluid-system deployment dataset-controller --replicas=1
   kubectl scale -n fluid-system deployment fluid-webhook --replicas=1