Realtime Compute for Apache Flink:OSS connector

Limits

• General limits

  • Only Realtime Compute for Apache Flink that uses VVR 4.0.14 or later can read data from or write data to OSS.

  • You can use Realtime Compute for Apache Flink to read data from or write data to only OSS buckets within your Alibaba Cloud account.

• Limits only on result tables

  • Data in row-oriented storage formats, such as AVRO, CSV, JSON, and RAW, cannot be written to OSS. For more information, see FLINK-30635.

  • Only Realtime Compute for Apache Flink that uses VVR 6.0.6 or later can write data to OSS-HDFS. For more information, see Write data to OSS-HDFS.

Syntax

CREATE TABLE OssTable (
  column_name1 INT,
  column_name2 STRING,
  ...
  datetime STRING,
  `hour` STRING
) PARTITIONED BY (datetime, `hour`) WITH (
  'connector' = 'filesystem',
  'path' = 'oss://<bucket>/path',
  'format' = '...'
);

Metadata columns

CREATE TABLE MyUserTableWithFilepath (
  column_name1 INT,
  column_name2 STRING,
  `file.path` STRING NOT NULL METADATA
) WITH (
  'connector' = 'filesystem',
  'path' = 'oss://<bucket>/path',
  'format' = 'json'
)

Parameters in the WITH clause

• Common parameters

  Parameter	Description	Data type	Required	Default value	Remarks
  connector	The type of the table.	STRING	Yes	No default value	Set the value to filesystem.
  path	The path of the file system.	STRING	Yes	No default value	The path is in the Uniform Resource Identifier (URI) format. Example: oss://my_bucket/my_path. Note After you configure this parameter in Realtime Compute for Apache Flink that uses VVR 8.0.6 or later, you must configure authentication information of OSS buckets to read data from or write data to the specified path of the file system. For more information, see Configure authentication information of OSS buckets.
  format	The format of the file.	STRING	Yes	No default value	Valid values: csv json avro parquet orc raw

• Parameters only for source tables

  Parameter	Description	Data type	Required	Default value	Remarks
  source.monitor-interval	The interval at which the source table monitors the generation of new files. The value of this parameter must be greater than 0.	DURATION	No	No default value	If you do not configure this parameter, the specified path is scanned only once. In this case, the data source is bounded. Each file is uniquely identified by the path of the file. Each time a new file is detected, the file is processed. The processed files are stored in the state during the lifecycle of the data source. Therefore, the state of the data source is saved when checkpoints and savepoints are generated. If you set this parameter to a small value, new files can be quickly detected but the file system or OSS is frequently traversed.

• Parameters only for result tables

  Parameter	Description	Data type	Required	Default value	Remarks
  partition.default-name	The name of the partition when the value of the partition field is null or an empty string.	STRING	No	_DEFAULT_PARTITION__	N/A.
  sink.rolling-policy.file-size	The maximum size of a file before the file is rolled.	MemorySize	No	128 MB	The data that is written to the specified directory is split and saved in PART files. Each subtask in which a sink operator of a partition receives the data of the partition generates at least one PART file. Files are rolled based on the rolling policy that is configured. If the current PART file that is in the in-progress state is to be closed, a new PART file is generated. A PART file is rolled based on the size of the file and the maximum period of time for which the specified file can be open.
  sink.rolling-policy.rollover-interval	The maximum period of time for which a PART file is open before the file is rolled.	DURATION	No	30min	The check frequency is specified by the sink.rolling-policy.check-interval parameter.
  sink.rolling-policy.check-interval	The interval at which Realtime Compute for Apache Flink checks whether a file needs to be rolled based on the rolling policy.	DURATION	No	1min	This parameter specifies whether the specified file needs to be rolled based on the value of the sink.rolling-policy.rollover-interval parameter.
  compaction.file-size	The size of the destination file into which temporary files are merged.	MemorySize	No	128 MB	The default value is the same as the value of the sink.rolling-policy.file-size parameter.
  sink.partition-commit.trigger	The type of the partition commit trigger.	STRING	No	process-time	Realtime Compute for Apache Flink provides the following types of partition commit triggers that can be used to write data to a partitioned table: process-time: This partition commit trigger is used based on the partition creation time and the current system time and does not require a partition time extractor or a watermark generator. If the current system time passes the sum of the partition creation time and the time specified by the sink.partition-commit.delay parameter, the process-time trigger immediately commits a partition. This trigger is suitable for general purposes but does not ensure accuracy. For example, if a data delay or a failure occurs, this trigger may commit a partition earlier than expected. partition-time: This partition commit trigger is used based on the extracted partition creation time and requires a watermark generator. If you want to use this trigger for a deployment, make sure that the deployment supports watermark generation and data is partitioned by time such as hour or day. If the time specified by the watermark passes the sum of the partition creation time and the time specified by the sink.partition-commit.delay parameter, the partition-time trigger immediately commits a partition.
  sink.partition-commit.delay	The maximum delay that is allowed before a partition can be committed. The partition is not committed until the delay time is reached.	DURATION	No	0s	If data is partitioned by day, you need to set this parameter to 1 d. If data is partitioned by hour, you need to set this parameter to 1 h.
  sink.partition-commit.watermark-time-zone	The time zone that is used when a watermark of the LONG data type is converted into a watermark of the TIMESTAMP data type. After the conversion, Realtime Compute for Apache Flink compares the watermark of the TIMESTAMP data type with the partition creation time to determine whether the partition needs to be committed.	STRING	No	UTC	This parameter takes effect only when the sink.partition-commit.trigger parameter is set to partition-time. The configuration of the sink.partition-commit.watermark-time-zone parameter has an impact on partition commitment. For example, if you specify ROWTIME for a TIMESTAMP_LTZ column in the source table and do not configure this parameter, the partition may be committed several hours later than the expected time. The default value UTC indicates that a watermark is defined on a TIMESTAMP column or no watermark is defined. If a watermark is defined on a TIMESTAMP_LTZ column, the time zone of the watermark must be the session time zone. The valid value for this parameter can be a full name of a time zone such as 'America/Los_Angeles' or a custom time zone such as 'GMT-08:00'.
  partition.time-extractor.kind	The time extractor that extracts time from a partition field.	STRING	No	default	Valid values: default: By default, you can configure the timestamp pattern or formatter. This is the default value. custom: The extractor class must be specified.
  partition.time-extractor.class	The extractor class that implements the PartitionTimeExtractor interface.	STRING	No	No default value	N/A.
  partition.time-extractor.timestamp-pattern	The default construction method that allows you to use partition fields to obtain a valid timestamp pattern.	STRING	No	No default value	By default, the first field is extracted in the yyyy-MM-dd hh:mm:ss format. If you want to extract the timestamp of a partition from the dt partition field, you can set this parameter to $dt. If you want to extract the timestamp of a partition from multiple partition fields, such as year, month, day, and hour, you can set this parameter to $year-$month-$day $hour:00:00. If you want to extract the timestamp of a partition from the dt and hour partition fields, you can set this parameter to $dt $hour:00:00.
  partition.time-extractor.timestamp-formatter	The formatter that is used to convert a partition timestamp string value into a timestamp. The partition timestamp string value is specified by the partition.time-extractor.timestamp-pattern parameter.	STRING	No	yyyy-MM-dd HH:mm:ss	For example, if you want to extract the timestamp of a partition from multiple partition fields, such as year, month, and day, you can set the partition.time-extractor.timestamp-pattern parameter to $year$month$day and the partition.time-extractor.timestamp-formatter parameter to yyyyMMdd. The default value of this parameter is yyyy-MM-dd HH:mm:ss. The timestamp formatter specified by this parameter is compatible with DateTimeFormatter of Java.
  sink.partition-commit.policy.kind	The type of the partition commit policy.	STRING	No	No default value	The partition commit policy allows Realtime Compute for Apache Flink to notify a downstream application that data writing to a partition is complete and data can be read from the partition. Valid values: success-file: The _success file is added to the specified directory. custom: A commit policy is created based on the specified class. You can specify multiple commit policies at the same time.
  sink.partition-commit.policy.class	The partition commit policy class that implements the PartitionCommitPolicy interface.	STRING	No	No default value	This class is available only when the sink.partition-commit.policy.kind parameter is set to custom.
  sink.partition-commit.success-file.name	The name of the file that is used if the sink.partition-commit.policy.kind parameter is set to success-file.	STRING	No	_SUCCESS	N/A.
  sink.parallelism	The degree of parallelism for writing files to the file system.	INTEGER	No	No default value	By default, the value of the sink.parallelism parameter is the same as the degree of parallelism of the upstream chained operators. If the value of the sink.parallelism parameter is different from the degree of parallelism of the upstream chained operators, the operator that writes files uses the value of this parameter. If file merging is enabled, the operator that merges files also uses the value of this parameter. Note The value must be greater than 0. Otherwise, an error occurs.

Configure authentication information of OSS buckets

After you specify the path of a file system, you must configure authentication information of OSS buckets. This way, you can read data from and write data to the specified path of the file system. To configure authentication information of OSS buckets, perform the following steps: Log on to the development console of Realtime Compute for Apache Flink. On the Configuration tab of the Deployments page, click Edit in the upper-right corner of the Parameters section and add the following configurations to the Other Configuration field:

fs.oss.bucket.<bucketName>.accessKeyId: xxxx
fs.oss.bucket.<bucketName>.accessKeySecret: xxxx

The following table describes the parameters in the preceding configurations.

Write data to OSS-HDFS

fs.oss.jindo.buckets: xxx
fs.oss.jindo.accessKeyId: xxx
fs.oss.jindo.accessKeySecret: xxx

Sample code

• Sample code for a source table

  CREATE TEMPORARY TABLE fs_table_source (
    `id` INT,
    `name` VARCHAR
  ) WITH (
    'connector'='filesystem',
    'path'='oss://<bucket>/path',
    'format'='parquet'
  );
  
  CREATE TEMPORARY TABLE blackhole_sink(
    `id` INT,
    `name` VARCHAR
  ) with (
    'connector' = 'blackhole'
  );
  
  INSERT INTO blackhole_sink SELECT * FROM fs_table_source ;

• Sample code for a result table

  • Write data to a partitioned table

    CREATE TABLE datagen_source (
      user_id STRING,
      order_amount DOUBLE,
      ts BIGINT, -- Use the time in milliseconds.
      ts_ltz AS TO_TIMESTAMP_LTZ(ts, 3),
      WATERMARK FOR ts_ltz AS ts_ltz - INTERVAL '5' SECOND -- Specify a watermark in a TIMESTAMP_LTZ column.
    ) WITH (
      'connector' = 'datagen'
    );
    
    
    CREATE TEMPORARY TABLE fs_table_sink (
      user_id STRING,
      order_amount DOUBLE,
      dt STRING,
      `hour` STRING
    ) PARTITIONED BY (dt, `hour`) WITH (
      'connector'='filesystem',
      'path'='oss://<bucket>/path',
      'format'='parquet',
      'partition.time-extractor.timestamp-pattern'='$dt $hour:00:00',
      'sink.partition-commit.delay'='1 h',
      'sink.partition-commit.trigger'='partition-time',
      'sink.partition-commit.watermark-time-zone'='Asia/Shanghai', -- The time zone is 'Asia/Shanghai'.
      'sink.partition-commit.policy.kind'='success-file'
    );
    
    
    -- Execute the following streaming SQL statement to insert data into a file system table.
    INSERT INTO fs_table_sink 
    SELECT 
      user_id, 
      order_amount, 
      DATE_FORMAT(ts_ltz, 'yyyy-MM-dd'),
      DATE_FORMAT(ts_ltz, 'HH') 
    FROM datagen_source;

  • Write data to a non-partitioned table

    CREATE TABLE datagen_source (
      user_id STRING,
      order_amount DOUBLE
    ) WITH (
      'connector' = 'datagen'
    );
    
    CREATE TEMPORARY TABLE fs_table_sink (
      user_id STRING,
      order_amount DOUBLE
    ) WITH (
      'connector'='filesystem',
      'path'='oss://<bucket>/path',
      'format'='parquet'
    );
    
    INSERT INTO fs_table_sink SELECT * FROM datagen_source;

DataStream API

The following sample code shows how to use the DataStream API to write data to OSS or OSS-HDFS.

String outputPath = "oss://<bucket>/path"
final StreamingFileSink<Row> sink =
                StreamingFileSink.forRowFormat(
                                new Path(outputPath),
                                (Encoder<Row>)
                                        (element, stream) -> {
                                            out.println(element.toString());
                                        })
                        .withRollingPolicy(OnCheckpointRollingPolicy.build())
                        .build();

outputStream.addSink(sink);

If you want to write data to OSS-HDFS, run the preceding code and perform the following steps: Log on to the development console of Realtime Compute for Apache Flink. On the Configuration tab of the Deployments page, click Edit in the upper-right corner of the Parameters section and add the configurations related to OSS-HDFS to the Other Configuration field. For more information, see Write data to OSS-HDFS.

References

• For more information about the connectors that are supported by Realtime Compute for Apache Flink, see Supported connectors.

• For more information about how to use the Tablestore connector, see Tablestore connector.

• For more information about how to use the Apache Paimon connector, see Apache Paimon connector.