全部产品
Search
文档中心

对象存储 OSS:C拷贝文件

更新时间:Dec 20, 2023

本文介绍如何将源Bucket中的文件(Object)复制到同一地域下相同或不同目标Bucket中。

注意事项

  • 本文以华东1(杭州)外网Endpoint为例。如果您希望通过与OSS同地域的其他阿里云产品访问OSS,请使用内网Endpoint。关于OSS支持的Region与Endpoint的对应关系,请参见访问域名和数据中心

  • 本文以OSS域名新建OSSClient为例。如果您希望通过自定义域名、STS等方式新建OSSClient,请参见初始化

  • 针对不同文件大小,需选择CopyObject或者UploadPartCopy进行拷贝文件。关于拷贝时的文件大小限制说明,请参见CopyObject

通过CopyObject拷贝文件

说明
  • 拷贝文件时,您必须拥有源文件的读权限及目标Bucket的读写权限。

  • 不支持跨地域拷贝。例如不能将华东1(杭州)地域存储空间中的文件拷贝到华北1(青岛)地域。

以下代码用于通过CopyObject拷贝文件:

#include "oss_api.h"
#include "aos_http_io.h"
/* yourEndpoint填写Bucket所在地域对应的Endpoint。以华东1(杭州)为例,Endpoint填写为https://oss-cn-hangzhou.aliyuncs.com。*/
const char *endpoint = "yourEndpoint";
/* 填写源Bucket名称。*/
const char *source_bucket_name = "yourSourceBucketName";
/* 填写源Object的完整路径。Object完整路径中不能包含Bucket名称。*/
const char *source_object_name = "yourSourceObjectName";
/* 填写与源Bucket处于同一地域的目标Bucket名称。*/
const char *dest_bucket_name = "yourDestBucketName";
/* 填写目标Object的完整路径。Object完整路径中不能包含Bucket名称。*/
const char *dest_object_name = "yourDestObjectName";
void init_options(oss_request_options_t *options)
{
    options->config = oss_config_create(options->pool);
    /* 用char*类型的字符串初始化aos_string_t类型。*/
    aos_str_set(&options->config->endpoint, endpoint);
    /* 从环境变量中获取访问凭证。运行本代码示例之前,请确保已设置环境变量OSS_ACCESS_KEY_ID和OSS_ACCESS_KEY_SECRET。*/
    aos_str_set(&options->config->access_key_id, getenv("OSS_ACCESS_KEY_ID"));
    aos_str_set(&options->config->access_key_secret, getenv("OSS_ACCESS_KEY_SECRET"));
    /* 是否使用了CNAME。0表示不使用。*/
    options->config->is_cname = 0;
    /* 用于设置网络相关参数,比如超时时间等。*/
    options->ctl = aos_http_controller_create(options->pool, 0);
}
int main(int argc, char *argv[])
{
    /* 在程序入口调用aos_http_io_initialize方法来初始化网络、内存等全局资源。*/
    if (aos_http_io_initialize(NULL, 0) != AOSE_OK) {
        exit(1);
    }
    /* 用于内存管理的内存池(pool),等价于apr_pool_t。其实现代码在apr库中。*/
    aos_pool_t *pool;
    /* 重新创建一个内存池,第二个参数是NULL,表示没有继承其它内存池。*/
    aos_pool_create(&pool, NULL);
    /* 创建并初始化options,该参数包括endpoint、access_key_id、acces_key_secret、is_cname、curl等全局配置信息。*/
    oss_request_options_t *oss_client_options;
    /* 在内存池中分配内存给options。*/
    oss_client_options = oss_request_options_create(pool);
    /* 初始化Client的选项oss_client_options。*/
    init_options(oss_client_options);
    /* 初始化参数。*/
    aos_string_t source_bucket;
    aos_string_t source_object;
    aos_string_t dest_bucket;
    aos_string_t dest_object;
    aos_table_t *headers = NULL;
    aos_table_t *resp_headers = NULL; 
    aos_status_t *resp_status = NULL; 
    aos_str_set(&source_bucket, source_bucket_name);
    aos_str_set(&source_object, source_object_name);
    aos_str_set(&dest_bucket, dest_bucket_name);
    aos_str_set(&dest_object, dest_object_name);
    headers = aos_table_make(pool, 0);
    /* 拷贝文件。*/
    resp_status = oss_copy_object(oss_client_options, &source_bucket, &source_object, &dest_bucket, &dest_object, headers, &resp_headers);
    if (aos_status_is_ok(resp_status)) {
        printf("copy object succeeded\n");
    } else {
        printf("copy object failed\n");
    }
    /* 释放内存池,相当于释放了请求过程中各资源分配的内存。*/
    aos_pool_destroy(pool);
    /* 释放之前分配的全局资源。*/
    aos_http_io_deinitialize();
    return 0;
}

通过UploadPartCopy拷贝文件

以下代码用于通过UploadPartCopy分片拷贝文件:

#include "oss_api.h"
#include "aos_http_io.h"
#include <sys/stat.h>
/* yourEndpoint填写Bucket所在地域对应的Endpoint。以华东1(杭州)为例,Endpoint填写为https://oss-cn-hangzhou.aliyuncs.com。*/
const char *endpoint = "yourEndpoint";
/* 填写源Bucket名称。*/
const char *source_bucket_name = "yourSourceBucketName";
/* 填写源Object的完整路径。Object完整路径中不能包含Bucket名称。*/
const char *source_object_name = "yourSourceObjectName";
/* 填写与源Bucket处于同一地域的目标Bucket名称。*/
const char *dest_bucket_name = "yourDestBucketName";
/* 填写目标Object的完整路径。Object完整路径中不能包含Bucket名称。*/
const char *dest_object_name = "yourDestObjectName";
void init_options(oss_request_options_t* options)
 {
     options->config = oss_config_create(options->pool);
     /* 用char*类型的字符串初始化aos_string_t类型。*/
     aos_str_set(&options->config->endpoint, endpoint);
     /* 从环境变量中获取访问凭证。运行本代码示例之前,请确保已设置环境变量OSS_ACCESS_KEY_ID和OSS_ACCESS_KEY_SECRET。*/
    aos_str_set(&options->config->access_key_id, getenv("OSS_ACCESS_KEY_ID"));
    aos_str_set(&options->config->access_key_secret, getenv("OSS_ACCESS_KEY_SECRET"));
     /* 是否使用了CNAME。0表示不使用。*/
     options->config->is_cname = 0;
     /* 用于设置网络相关参数,比如超时时间等。*/
     options->ctl = aos_http_controller_create(options->pool, 0);
 }
 int main(int argc, char* argv[])
 {
     /* 在程序入口调用aos_http_io_initialize方法来初始化网络、内存等全局资源。*/
     if (aos_http_io_initialize(NULL, 0) != AOSE_OK) {
         exit(1);
     }
     /* 用于内存管理的内存池(pool),等价于apr_pool_t。其实现代码在apr库中。*/
     aos_pool_t* pool;
     /* 重新创建一个内存池,第二个参数是NULL,表示没有继承其它内存池。*/
     aos_pool_create(&pool, NULL);
     /* 创建并初始化options,该参数包括endpoint、access_key_id、acces_key_secret、is_cname、curl等全局配置信息。*/
     oss_request_options_t* oss_client_options;
     /* 在内存池中分配内存给options。*/
     oss_client_options = oss_request_options_create(pool);
     /* 初始化Client的选项oss_client_options。*/
     init_options(oss_client_options);
     /* 初始化参数。*/
     aos_string_t src_bucket;
     aos_string_t src_object;
     aos_string_t dest_bucket;
     aos_string_t dest_object;
     aos_string_t upload_id;
     aos_table_t* headers = NULL;
     aos_table_t* resp_headers = NULL;
     aos_status_t* resp_status = NULL;
     oss_list_upload_part_params_t* list_upload_part_params;
     oss_upload_part_copy_params_t* upload_part_copy_params1;
     oss_upload_part_copy_params_t* upload_part_copy_params2;
     oss_list_part_content_t* part_content;
     aos_list_t complete_part_list;
     oss_complete_part_content_t* complete_content;
     aos_table_t* list_part_resp_headers = NULL;
     aos_table_t* complete_resp_headers = NULL;
     int part1 = 1;
     int part2 = 2;
     int64_t range_start1 = 0;
     int64_t range_end1 = 6000000;//not less than 5MB
     int64_t range_start2 = 6000001;
     int64_t range_end2;
     int max_ret = 1000;
     int64_t content_length = 0;
     /* 获取源Object的大小。*/
     headers = aos_table_make(pool, 0);
     aos_str_set(&src_bucket, source_bucket_name);
     aos_str_set(&src_object, source_object_name);
     resp_status = oss_head_object(oss_client_options, &src_bucket, &src_object, headers, &resp_headers);
     if (aos_status_is_ok(resp_status)) {
         char *content_length_str = (char*)apr_table_get(resp_headers, OSS_CONTENT_LENGTH);
         if (content_length_str != NULL) {
             content_length = atoll(content_length_str);
         }
         printf("head object succeeded\n");
     }
     else {
         printf("head object failed\n");
     }
     /*  初始化分片。*/
     headers = aos_table_make(pool, 0);
     aos_str_set(&dest_bucket, dest_bucket_name);
     aos_str_set(&dest_object, dest_object_name);
     resp_status = oss_init_multipart_upload(oss_client_options, &dest_bucket, &dest_object, &upload_id, headers, &resp_headers);
     if (aos_status_is_ok(resp_status)) {
         printf("init multipart upload succeeded, upload_id is %s\n", upload_id.data);
     }
     else {
         printf("init multipart upload failed\n");
     }
     /* 拷贝第一个分片数据。*/
     upload_part_copy_params1 = oss_create_upload_part_copy_params(pool);
     aos_str_set(&upload_part_copy_params1->source_bucket, source_bucket_name);
     aos_str_set(&upload_part_copy_params1->source_object, source_object_name);
     aos_str_set(&upload_part_copy_params1->dest_bucket, dest_bucket_name);
     aos_str_set(&upload_part_copy_params1->dest_object, dest_object_name);
     aos_str_set(&upload_part_copy_params1->upload_id, upload_id.data);
     upload_part_copy_params1->part_num = part1;
     upload_part_copy_params1->range_start = range_start1;
     upload_part_copy_params1->range_end = range_end1;
     headers = aos_table_make(pool, 0);
     resp_status = oss_upload_part_copy(oss_client_options, upload_part_copy_params1, headers, &resp_headers);
     if (aos_status_is_ok(resp_status)) {
         printf("upload part 1 copy succeeded\n");
     }
     else {
         printf("upload part 1 copy failed\n");
     }
     /* 拷贝第二个分片数据。*/
     range_end2 = content_length - 1;
     upload_part_copy_params2 = oss_create_upload_part_copy_params(pool);
     aos_str_set(&upload_part_copy_params2->source_bucket, source_bucket_name);
     aos_str_set(&upload_part_copy_params2->source_object, source_object_name);
     aos_str_set(&upload_part_copy_params2->dest_bucket, dest_bucket_name);
     aos_str_set(&upload_part_copy_params2->dest_object, dest_object_name);
     aos_str_set(&upload_part_copy_params2->upload_id, upload_id.data);
     upload_part_copy_params2->part_num = part2;
     upload_part_copy_params2->range_start = range_start2;
     upload_part_copy_params2->range_end = range_end2;
     headers = aos_table_make(pool, 0);
     resp_status = oss_upload_part_copy(oss_client_options, upload_part_copy_params2, headers, &resp_headers);
     if (aos_status_is_ok(resp_status)) {
         printf("upload part 2 copy succeeded\n");
     }
     else {
         printf("upload part 2 copy failed\n");
     }
     /* 列出分片。*/
     headers = aos_table_make(pool, 0);
     list_upload_part_params = oss_create_list_upload_part_params(pool);
     list_upload_part_params->max_ret = max_ret;
     aos_list_init(&complete_part_list);
     resp_status = oss_list_upload_part(oss_client_options, &dest_bucket, &dest_object, &upload_id, list_upload_part_params, &list_part_resp_headers);
     aos_list_for_each_entry(oss_list_part_content_t, part_content, &list_upload_part_params->part_list, node) {
         complete_content = oss_create_complete_part_content(pool);
         aos_str_set(&complete_content->part_number, part_content->part_number.data);
         aos_str_set(&complete_content->etag, part_content->etag.data);
         aos_list_add_tail(&complete_content->node, &complete_part_list);
     }
     /* 完成分片拷贝。*/
     resp_status = oss_complete_multipart_upload(oss_client_options, &dest_bucket, &dest_object, &upload_id, &complete_part_list, headers, &complete_resp_headers);
     if (aos_status_is_ok(resp_status)) {
         printf("complete multipart upload succeeded\n");
     }
     else {
         printf("complete multipart upload failed\n");
     }
     /* 释放内存池,相当于释放了请求过程中各资源分配的内存。*/
     aos_pool_destroy(pool);
     /* 释放之前分配的全局资源。*/
     aos_http_io_deinitialize();
     return 0;
 }

相关文档

  • 拷贝小文件

    关于拷贝小文件的API接口说明,请参见CopyObject

  • 拷贝大文件

    关于拷贝大文件的API接口说明,请参见UploadPartCopy