AssociateEipAddressBatch - - Alibaba Cloud Dokümantasyon Merkezi

Birden fazla esnek IP adresını (EIP) aynı bölgedeki bir bulut hizmeti örneğiyle toplu olarak ilişkilendirir.

Operation description

AssociateEipAddressBatch, birden fazla EIP'yi bir bulut hizmeti örneğiyle toplu olarak ilişkilendirir. Bu işlem, yalnızca EIP'lerin aynı bölgedeki bir İnternet NAT ağ geçidi örneğine veya ikincil ağ arabirimi denetleyicisi (NIC) örneğine toplu olarak eklenmesini destekler. Bir EIP'yi diğer bulut hizmeti örnekleriyle ilişkilendirmek için AssociateEipAddress API'sini çağırın.
AssociateEipAddressBatch eşzamansız bir işlemdir. Bu işlemi çağırdıktan sonra sistem bir istek kimliği döndürür, ancak EIP örnekleri henüz bulut hizmeti örneğine eklenmemiştir. Ekleme görevi arka planda çalışmaya devam eder. Bir EIP örneğinin durumunu sorgulamak için DescribeEipAddresses API'sini çağırabilirsiniz:
- EIP örneği Associating durumundaysa, EIP örneği ekleniyor demektir. Bu durumda yalnızca sorgulama işlemleri gerçekleştirebilirsiniz.
- EIP örneği InUse durumundaysa, EIP örneği eklenmiş demektir.
AssociateEipAddressBatch, aynı EIP örneğinin bulut hizmeti örnekleriyle eşzamanlı olarak eklenmesini desteklemez.

Try it now

Try this API in OpenAPI Explorer, no manual signing needed. Successful calls auto-generate SDK code matching your parameters. Download it with built-in credential security for local usage.

Test

RAM authorization

The table below describes the authorization required to call this API. You can define it in a Resource Access Management (RAM) policy. The table's columns are detailed below:

Action: The actions can be used in the Action element of RAM permission policy statements to grant permissions to perform the operation.
API: The API that you can call to perform the action.
Access level: The predefined level of access granted for each API. Valid values: create, list, get, update, and delete.
Resource type: The type of the resource that supports authorization to perform the action. It indicates if the action supports resource-level permission. The specified resource must be compatible with the action. Otherwise, the policy will be ineffective.
- For APIs with resource-level permissions, required resource types are marked with an asterisk (*). Specify the corresponding Alibaba Cloud Resource Name (ARN) in the Resource element of the policy.
- For APIs without resource-level permissions, it is shown as All Resources. Use an asterisk (*) in the Resource element of the policy.
Condition key: The condition keys defined by the service. The key allows for granular control, applying to either actions alone or actions associated with specific resources. In addition to service-specific condition keys, Alibaba Cloud provides a set of common condition keys applicable across all RAM-supported services.
Dependent action: The dependent actions required to run the action. To complete the action, the RAM user or the RAM role must have the permissions to perform all dependent actions.

Action

Access level

Resource type

Condition key

Dependent action

vpc:AssociateEipAddressBatch

update

*Address

acs:vpc:{#regionId}:{#accountId}:eip/{#AllocationId}

Instance

acs:vpc:{#regionId}:{#accountId}:instance/{#InstanceId}

NatGateway

acs:vpc:{#regionId}:{#accountId}:natgateway/{#NatGatewayId}

None

Request parameters

Parameter	Type	Required	Description	Example
RegionId	string	Yes	Bulut hizmeti örneğiyle ilişkilendirilecek EIP'lerin bölge kimliği. Bölge kimliğini sorgulamak için DescribeRegions API'sini çağırabilirsiniz.	cn-hangzhou
BindedInstanceId	string	Yes	EIP'lerin ekleneceği bulut hizmeti örneğinin kimliği. Bir İnternet NAT ağ geçidi örneğinin veya ikincil ağ arabirimi denetleyicisi (NIC) örneğinin örnek kimliğini belirtebilirsiniz.	ngw-hp3akk9irtd69jad****
BindedInstanceType	string	Yes	EIP'lerin ekleneceği örneğin türü. Geçerli değerler: Nat: İnternet NAT ağ geçidi. NetworkInterface: İkincil ağ arabirimi denetleyicisi (NIC).	Nat
Mode	string	No	İlişkilendirme modu. Değeri, çoklu EIP'den ENI'ye modunu belirten MULTI_BINDED olarak ayarlayın. Bu parametre yalnızca InstanceType değeri NetworkInterface olarak ayarlandığında gereklidir.	MULTI_BINDED
InstanceIds	array	Yes	Bulut hizmeti örneğiyle ilişkilendirilecek EIP'lerin listesi. En az 1 EIP belirtmeniz gerekir ve en fazla 50 EIP belirtebilirsiniz.
	string	No	Bulut hizmeti örneğiyle ilişkilendirilecek EIP örneğinin kimliği. En az 1 EIP örnek kimliği belirtmeniz gerekir ve en fazla 50 EIP örnek kimliği belirtebilirsiniz.	eip-2zeerraiwb7ujsxdc****
ClientToken	string	No	İsteğin idempotent olmasını sağlamak için kullanılan istemci belirteci. Belirteci oluşturmak için istemciyi kullanabilirsiniz, ancak belirtecin farklı istekler arasında benzersiz olduğundan emin olmanız gerekir. Belirteç yalnızca ASCII karakterleri içerebilir. Not Bu parametreyi belirtmezseniz, sistem otomatik olarak API isteğinin RequestId değerini ClientToken olarak kullanır. RequestId her API isteği için farklı olabilir.	02fb3da4-130e-11e9-8e44-0016e04115b

Response elements

Element	Type	Description	Example
	object	Yanıt parametreleri.
RequestId	string	İstek kimliği.	54B48E3D-DF70-471B-AA93-08E683A1B45

Examples

Success response

JSON format

{
  "RequestId": "54B48E3D-DF70-471B-AA93-08E683A1B45"
}

Error codes

HTTP status code	Error code	Error message	Description
400	InvalidAssociation.Duplicated	Specified instance already is associated.
400	OperationDenied	Specified instance is not in VPC.
400	InvalidParameter.Mismatch	Specified elastic IP address and ECS instance are not in the same region.
400	IncorrectEipStatus	Current elastic IP status does not support this operation
400	IncorrectInstanceStatus	Current instance status does not support this operation.
400	InvalidInstanceType.ValueNotSupported	The specified value of InstanceType is not supported.
400	IncorrectHaVipStatus	HaVip can be operated by this action only when it's status is Available or InUse.	The operation supports only HAVIPs in the Available or InUse state.
400	InvalidParameter	The specified parameter is not valid.
400	Forbidden	The eip instance owener error	The EIP does not belong to your account. Check whether you have the permissions to perform the operation on the EIP.
400	TaskConflict	The eip operate too frequent, TaskConflict.	Operations are too frequent and tasks conflict with each other.
400	InvalidBindingStatus	The eip binding status invalid.
400	BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP	The instance may have portMap or already bind eip.	The ECS instance already has a port forwarding rule (DNAT). Delete the corresponding port forwarding rule before performing the operation.
400	EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP	instance already bind natpublicip,cannot bind eip.
400	BIND_INSTANCE_OWENER_ERROR	Cannot operate the eip.
400	NATGATEWAY_FINANCIALLOCKED	The NatGateway has expire, cannot do bind operation.
400	InvalidParameter.InstanceTypeNotSupport	The specified instance type is not support.
400	QuotaExceeded.NumberOfTrafficEip	The number of traffic eip on natgw exceed limitation.
400	QuotaExceeded.NumberOfEip	Binded eip Quota exceed on this NatGw.	The number of EIPs associated with the NAT gateway exceeds the upper limit.
400	InvalidEipBandwidth.OutOfMaxValue	The Eip Bandwidth is invalid.
400	Forbidden.EipCanNotBindGatgw	Eip can not bind on natgw.
400	InvalidAction.Denied	Action is denied due to unfinished Eip configuration modification.	The EIP configurations are not complete and the operation is denied.
400	InstanceType.NotSupport	The instance type is invalid.
400	InvalidParams.NotFound	instance not found
400	BindInstance.NotSupported	bind instance type %s is not supported.
400	Forbidden.InstanceBandwidthNotZero	Eip can not bind with instance when it's bandwidth is not zero.
400	INSTANCE_TYPE_NOT_SUPPORT	The instance type is invalid.
400	ServerRegion.Invalid	Eip bind remote server region invalid.
400	Eni.Attached	The eni should be detached from ecs when associating with direct eip.	If the ENI is associated with an EIP in cut-through mode, you must disassociate the ENI from the ECS instance.
400	Invalid.DirectEip.BindType	The direct eip can be only associated with eni.
400	Invalid.Function.NotSupported	Multi-IP function is under test, the region or uid is not supported.
400	InvalidStatus.EniStatusNotSupport	%s
400	InvalidParameter.EniInstanceId	%s
400	%s	%s
400	EipBatchBind.TypeNotSupport	eip batch bind type not support
400	OperationFailed.RegionNotMatch	The specified eip is not in this region
400	InvalidEIPStatus.BizDisabled	The EIP has been locked.	The error message returned because the EIP is locked.
400	Forbidden.FinancialLocked	The ip business status is invalid.	The error message returned because the instance has overdue payments.
400	OperationDenied.Unauthorized	The operation is not allowed because the user is not in the whitelist.	The operation is not allowed because you are not in the whitelist.
400	OperationDenied.UnsupportedEipBindMode	The operation is not supported for the NAT gateway due to its EIP binding mode.	The operation is not supported by the EIP binding mode of the NAT gateway.
400	OperationDenied.Ipv4GatewayExist	The operation is not allowed because of Ipv4GatewayExist.
404	InvalidAllocationId.NotFound	Specified allocation ID is not found.
404	InvalidInstanId.NotFound	Specified instance does not exist.
404	Forbidden.RegionNotFound	Specified instance is not found during access authentication.	The error message returned because the region is not supported.
404	OperationDenied.VpcIpv4GatewayEnabled	The operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway.	IPv4 gateways are enabled for the VPC where the NAT gateway resides and the operation is denied.

See Error Codes for a complete list.

Release notes

See Release Notes for a complete list.