公共錯誤碼
更新時間：
Copy as MD
錯誤碼
|
HTTP status code |
錯誤碼 |
錯誤資訊 |
描述 |
操作 |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | 指定的執行個體不存在。 | diagnosis |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | 指定的計費週期無效。 | diagnosis |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | 指定的計費類型不可用。 | diagnosis |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | 無法修改路由表屬性，表名格式無效。 | diagnosis |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | 呼叫內部服務失敗，請稍後重試。 | diagnosis |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | 傳入的 Name 無效。 | diagnosis |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | 接入設備不允許直接啟用實體連接埠。 | diagnosis |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | 輸入的接入點不存在或者沒有權限查看。 | diagnosis |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | 使用者購買 VPN 的帳戶餘額不足。 | diagnosis |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | 帳號可用金額不足。 | diagnosis |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | 帳號餘額不足。 | diagnosis |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | AliUid 不允許直接啟用實體連接埠。 | diagnosis |
| AllocateIpFailed | Alloc bandwidthPackage ips failed | 為共用頻寬包分配公網IP失敗。 | diagnosis | |
| 400 | AnotherJobTesting | There is another job which is testing. | 同一個使用者在同一個地域只能同時進行一個故障演練任務。 | diagnosis |
| ARREARAGE | 指定的帳號已欠費。 | diagnosis | ||
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | EIP 執行個體與共用頻寬的 IpVersion 不匹配。 | diagnosis |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | DHCP 選項集執行個體 ID 和 VPC 不匹配，請檢查 DHCP 和 VPC 的對應關係是否正確。 | diagnosis |
| AUTH.RAM_AUTH_FAILED | RAM帳號身份驗證失敗。 | diagnosis | ||
| 400 | AvailableZoneNotExist | Available zone not exist. | 可用區不存在。 | diagnosis |
| BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | 該頻寬包被欠費鎖定。 | diagnosis | |
| BandwidthPackage.QuotaExceeded | 頻寬包數量已超過限制。 | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | 混合雲端模式的 EIP 不能新增到低頻寬的頻寬包中。 | diagnosis |
| BandwidthPackageId.InvalidBizStatus | 指定的頻寬包已經被金融鎖定，不能添加ip。 | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | 指定的頻寬包已經被金融鎖定，不能新增 IP。 | diagnosis |
| BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | 共用頻寬包操作衝突。 | diagnosis | |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | 指定的繫結執行個體已經具有頻寬。 | diagnosis |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | ECS 執行個體已經存在連接埠轉發規則（DNAT），請刪除相應的連接埠轉發規則再進行操作。 | diagnosis |
| BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | 不能操作這個 EIP。 | diagnosis | |
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | 標籤和資源群組不能同時為空。 | diagnosis |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | 參數 GatewayRouteTableId 和 Ipv4GatewayRouteTableId 不能同時為空，建議您使用 GatewayRouteTableId。 | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | Ipv6InstanceId 和 Ipv6InternetBandwidthId 不能同時為空。 | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | 入參 Ipv6AddressId 和 Ipv6InternetBandwidthId 不能同時為空。 | diagnosis |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | 帳戶沒有設定支付方式或預留金額不足。 | diagnosis |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | 用戶端 IP 池的網路遮罩長度必須大於等於 16 且小於等於 29。 | diagnosis |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | 目前用戶端網段不可用。 | diagnosis |
| COMMODITY.INVALID_COMPONENT | 銷售模組參數不滿足約束檢查。 | diagnosis | ||
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | 銷售模組參數不滿足約束檢查。 | diagnosis |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | 指定的 VSwitchCidrReservationMask 和 VSwitchCidrReservationCidr 衝突，請根據 API 文件參數說明修改後重試。 | diagnosis |
| CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | 超過指定 VPC 的 HAVIP 配額。 | diagnosis | |
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | 超過執行個體的 HaVip 配額。 | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | 指向該 HaVip 執行個體的路由條目數量已達上限。 | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | 同路由表中指向 HaVip 的路由數超過限制。 | diagnosis |
| CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | 一個後端服務執行個體綁定的全球加速執行個體數量達到上限。 | diagnosis | |
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | 超過 HaVip 的執行個體配額。 | diagnosis |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | 建立目的路由數量超過配額限制。 | diagnosis |
| CreateOrderFailed | 訂單建立失敗。 | diagnosis | ||
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | 策略路由數量超過配額限制。 | diagnosis |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | 建立超過配額限制的 SSL 憑證數量。 | diagnosis |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | VPN 連線數量超過配額限制。 | diagnosis |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | 建立 VPN 使用者閘道數量超出配額。 | diagnosis |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 目前 CBN 的狀態不支援建立虛擬交換器（VSwitch）操作。 | diagnosis |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | 額度不足，請聯絡您的通路合作夥伴提升額度。 | diagnosis |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | 目前 VPN 連線執行個體被跨帳號授權到其他帳號的 CEN，刪除時需要先解除跨帳號授權。 | diagnosis |
| CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | 禁止為其他站點的使用者建立 VBR。 | diagnosis | |
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | 禁止為其他站點的使用者建立 VBR。 | diagnosis |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | 目前使用者閘道和路由存在衝突。 | diagnosis |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | IPSec 連線關聯的使用者閘道與 VPN 閘道不應該有相同的閘道 IP 位址。 | diagnosis |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 目前 CBN 狀態不支援刪除虛擬交換器（VSwitch）操作。 | diagnosis |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | 資源刪除保護已啟用。 | diagnosis |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | 資源刪除保護不存在。 | diagnosis |
| 400 | DeletionProtection.OwnerError | The resource owner error. | 您不是該資源的擁有者，無法操作。 | diagnosis |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | 不支援預付費資源。 | diagnosis |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | 資源不存在。 | diagnosis |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | 不支援該類型資源。 | diagnosis |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | 該交換器下還有資源未釋放，無法刪除。 | diagnosis |
| DependencyViolation | Some route entry status blocked this operation. | 無法執行該操作，目前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis | |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的資源[%s]依賴了[%s]，請先刪除依賴資源後再操作。 | diagnosis |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | 該 VPC 存在反向存取授權關係，無法刪除。 | diagnosis |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的資源存在依賴關係，請先解除關聯。 | diagnosis |
| DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | NAT 閘道上有尚未刪除的頻寬套餐，請刪除 NAT 閘道下的所有頻寬套餐後再重新操作。 | diagnosis | |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | VBR 已經依賴 BgpGroup，不能刪除。 | diagnosis |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | VBR 存在 BGP 宣告網段設定，不能刪除 VBR。 | diagnosis |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | 存在依賴的 BGP 對端。 | diagnosis |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | 目前交換器正被雲端服務使用無法刪除，請確認雲端服務使用場景。 | diagnosis |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | 該 VPC 存在雲端服務資源，無法刪除。 | diagnosis |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | 依賴衝突，存在自訂路由表。 | diagnosis |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | 目前 VPC 還存在未刪除的 DHCP 選項集執行個體，不允許刪除。 | diagnosis |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的資源被其他的資源依賴，不允許進行目前操作。 | diagnosis |
| DependencyViolation.EIPS | 指定的 NAT 閘道已綁定了彈性公網 IP，請先將其從 NAT 閘道解綁。 | diagnosis | ||
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | 指定的 NAT 閘道已綁定了彈性公網 IP，請先將其從 NAT 閘道解綁。 | diagnosis |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | 當 NAT 閘道存在時，無法刪除 VSwitch。 | diagnosis |
| DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis | |
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | 存在 Fullnat 設定條目依賴此 NAT IP，因此本操作不能完成。 | diagnosis |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | VPC 中還有終端節點，不能被刪除，請先刪除該 VPC 中的終端節點再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的資源被其他的資源依賴，不允許進行目前操作。 | diagnosis |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | 指定的 VPN 閘道上有 Gre 隧道未刪除。 | diagnosis |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | 無法刪除交換器，該交換器下有關聯的 HaVip。 | diagnosis |
| DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | 無法刪除 HAVIP，該 HAVIP 繫結了 EIP。 | diagnosis | |
| DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | 作為路由條目下一跳 HaVip 不能被刪除，請先刪除指向該 HaVip 的路由條目後再進行刪除。 | diagnosis | |
| DependencyViolation.Instance | Specified object has dependent resources | 目前 VPC 還存在未刪除的雲端產品執行個體，VPC 刪除失敗。 | diagnosis | |
| 404 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | 當前 VPC 還存在未刪除的雲端產品執行個體，VPC 刪除失敗。 | diagnosis |
| DependencyViolation.ip | 指定的 NAT 閘道已繫結了一個彈性公網 IP。 | diagnosis | ||
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | 該資源已分配 IpPrefix，請刪除 IpPrefix 後重試。 | diagnosis |
| DependencyViolation.Ips | 指定的共用頻寬包已繫結。 | diagnosis | ||
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | 該資源無法被刪除，因為該資源下有 IPsec 服務端依賴。 | diagnosis |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | 該 VPC 下存在 IPv4 閘道，無法刪除。 | diagnosis |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的資源被其他的資源依賴，不允許進行目前操作。 | diagnosis |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的資源[%s]依賴了 IPv6 預留網段，請先刪除依賴資源後再操作。 | diagnosis |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | 該 VPC 存在 IPv6 閘道，無法刪除。 | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的資源被其他的資源依賴，不允許進行目前操作。 | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | 指定的 IPv6 執行個體已開通 IPv6 頻寬，請釋放 IPv6 頻寬後再操作。 | diagnosis |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | VSwitch 加入了組播域，無法刪除。 | diagnosis |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | VPC 中還有 NAT 閘道，不能被刪除，請先刪除該 VPC 中的 NAT 閘道再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | 有依賴的 NAT IP，所以此操作不能進行。 | diagnosis |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT 有依賴的 NAT IP CIDR，所以此操作不能進行。 | diagnosis |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | 指定的物件具有從屬資源網路 ACL。 | diagnosis |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | 當存在網路 ACL 時，無法刪除 VSwitch。 | diagnosis |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | NQA 存在，無法刪除 VBR。 | diagnosis |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | 該 VPC 存在對端 RouterInterface 未刪除，刪除 VPC 失敗。 | diagnosis |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | 由於 PrefixList 還存在引用關係，所以無法刪除 PrefixList。 | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | 存在依賴資源。 | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | %s 資源依賴於 %s，因此本操作不能完成。 | diagnosis |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | 有依賴的保護性限速規則。 | diagnosis |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | 當前 VPC 還存在未刪除的自訂路由規則，VPC 刪除失敗。 | diagnosis |
| DependencyViolation.RouteInterface | Specified object has dependent route interface . | 指定的虛擬交換器連接了路由器介面，無法刪除。 | diagnosis | |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT 有依賴的路由條目，所以此操作不能進行。 | diagnosis |
| DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | 該物件有關聯的路由器介面。 | diagnosis | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | 路由器介面被某個路由條目引用（將當做下一跳目標）時，不能刪除，請先刪除指向該路由器介面的路由條目後再進行刪除。 | diagnosis |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | VBR 已經被引用。 | diagnosis |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | VSwitch 已繫結路由表，不允許刪除。 | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | 當前 VPC 還存在未刪除的安全性群組，VPC 刪除失敗，請先刪除該 VPC 下的安全性群組後再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | 當前 VPC 還存在未刪除的安全性群組，VPC 刪除失敗，請先刪除該 VPC 下的安全性群組後再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | 當前 VPC 還存在未刪除的安全性群組[%s]，VPC 刪除失敗，請先刪除該 VPC 下的安全性群組後再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | 此 IPv6 閘道[%s]下的位址[%s]開通了公網頻寬，來自於共享使用者[%s]，請刪除後重試。 | diagnosis |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | 由於 PrefixList 存在共享關係，所以無法刪除 PrefixList。 | diagnosis |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | 當 SNAT 使用時，無法刪除 VSwitch。 | diagnosis |
| DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis | |
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | 指定的 VPN 閘道上有 SSL VPN 服務端未刪除。 | diagnosis |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | 存在流量鏡像會話仍依賴於當前資源。 | diagnosis |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | 您指定的資源被其他的資源依賴，不允許進行當前操作。 | diagnosis |
| DependencyViolation.Tunnel | Specified object has dependent tunnel. | 該物件有關聯的隧道。 | diagnosis | |
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | DHCP 選項集已繫結 VPC，不允許刪除。 | diagnosis |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT 有依賴的終端節點服務，所以此操作不能進行。 | diagnosis |
| DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | 指定的使用者閘道上有 VPN 連線未刪除。 | diagnosis | |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | 指定的使用者閘道上有 VPN 連線未刪除。 | diagnosis |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | 當前 VPC 還存在未刪除的交換機，VPC 刪除失敗，刪除 VPC 下的交換機後再嘗試刪除 VPC。 | diagnosis |
| 404 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | 該 VSwitch 存在 VSwitchCidrReservation 使用中，不允許刪除。 | diagnosis |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | 目標 IP 連接埠被映射數超過配額。 | diagnosis |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | DryRun 校驗通過。 | diagnosis |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | 指定的 ClientToken 存在重複。 | diagnosis |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | 指定的 IP 位址存在重複 IP，請按 API 文件參數說明修改後再重試。 | diagnosis |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | 指定的 SecondaryCidrBlock 存在重複。 | diagnosis |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | 指定的參數 TagKey 重複。 | diagnosis |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | 下一個重複的路由條目。 | diagnosis |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | 參數重複。 | diagnosis |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | 傳入了重複的 cidrBlock。 | diagnosis |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | 給位址池新增位址段失敗，因為位址段和位址遮罩不能同時輸入。 | diagnosis |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | DNAT 公網連接埠 %s 已被重複佔用。 | diagnosis |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | InternalPort 參數重複或已被佔用。 | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | 本端 IP 重複。 | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | 互聯 IP 重複，請更換後重試。 | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | 參數重複。 | diagnosis |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | 本端 IP 位址參數有重複，請更換本端 IP 後重試。 | diagnosis |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | 本端 IP 位址參數有重複，請更換本端 IP 後重試。 | diagnosis |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | 本端 IP 位址重複。 | diagnosis |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | 互聯 IP 位址重複，請更換後重試。 | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | BGP 鄰居 IP 位址重複。 | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | 對端 IP 位址重複。 | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | 參數值存在重複。 | diagnosis |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | 對端 IP 位址參數有重複，請更換對端 IP 後重試。 | diagnosis |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | 對端 IP 位址重複。 | diagnosis |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | 指定的優先順序參數與已有的優先順序重複。 | diagnosis |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | 流量鏡像來源執行個體 ID 參數中包含重複值。 | diagnosis |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | 傳入的 trafficPath 參數中存在重複的數值。 | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | 繫結了 Qos 策略的共用實體專線不允許建立跨帳號虛擬邊界路由器，請聯繫商務經理。 | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | 繫結了 Qos 策略的獨享實體專線不允許建立共用實體專線，請聯繫商務經理。 | diagnosis |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | 實體專線所在的裝置不支援 Qos 特性。 | diagnosis |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | 目前的故障演練任務正在操作中，請稍後重試。 | diagnosis |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | 故障演練任務最多可以新增 16 個資源。 | diagnosis |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | 目前使用者已經存在一個正在進行的故障演練任務，請完成後再重試。 | diagnosis |
| 400 | EcFailToGetAp | Fail to get access point details. | 無法查詢到對應接入點資訊。 | diagnosis |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | 此高速通道授權關係不存在。 | diagnosis |
| 400 | EcNotEnoughResource | Insufficient access point resources. | 接入點資源不足。 | diagnosis |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | 高可靠實體專線在本區域暫時不支援售賣。 | diagnosis |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | 單 VBR 多 Pconn 場景，必須將所有的 Pconn 都繫結 QoS 策略。 | diagnosis |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | 包含跨帳號虛擬邊界路由器的獨享實體專線不允許繫結 Qos 策略。 | diagnosis |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | 包含共用實體專線的獨享實體專線不允許繫結 Qos 策略。 | diagnosis |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | 目前 Qos 設定與其他設定衝突，請稍後再試。 | diagnosis |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | 不允許一條 QoS 規則內同時存在 IPv4 位址設定和 IPv6 位址設定，與此同時若原有的設定網路類型為 IPv4 不允許修改為 IPv6（反之亦然），請您檢查後修改。 | diagnosis |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | 您目前的 Qos 策略已關聯了實體專線，無法直接刪除，請先解除關聯後再次重試。 | diagnosis |
| EipOperation.TooFrequently | 該 EIP 加入頻寬包過於頻繁，請稍後重試。 | diagnosis | ||
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | 該 EIP 加入頻寬包過於頻繁，請稍後重試。 | diagnosis |
| EIP_BIND_NATGATEWAY | 指定的 EIP 已繫結了 NAT 閘道。 | diagnosis | ||
| EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | 該執行個體已有公網 IP。 | diagnosis | |
| EIP_NOT_SUPPORT_SNAT_POOL | 指定的 EIP 不可加入 SNAT 池中。 | diagnosis | ||
| EIP_UNDERSTOCK | There are not enough eip in stock | 庫存的 EIP 數量不足。 | diagnosis | |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | 不同 IPsec 隧道 BGP 中存在相同的隧道 CIDR。隧道 CIDR 是 %s。 | diagnosis |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | VPC 路由表中存在路由的前綴 %s 被包含在 IPsec Server 用戶端 CIDR 中。 | diagnosis |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | 存在相同前綴的策略路由，前綴為 %s。 | diagnosis |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | 目前區域不支援開啟高可用。 | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | 存在相同前綴的路由，前綴為 %s。 | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | 存在相同前綴的路由，前綴為 %s。 | diagnosis |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | VPC 路由表中存在路由的前綴 %s 被包含在 SSL VPN 用戶端 CIDR 中。 | diagnosis |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | 目前 VPN 閘道類型不支援開啟高可用。 | diagnosis |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | 開啟高可用，只支援 IPsec VPN 或者 SSL VPN。 | diagnosis |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | 當 ENI 繫結直通 EIP 時，需要 ENI 與 ECS 解除繫結。 | diagnosis |
| EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | 關聯的邊界路由器達到配額上限。 | diagnosis | |
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | 參數 %s 和 %s 相互排斥。 | diagnosis |
| 400 | Abs.InstanceNotExist | The specified instance does not exist. | 指定的執行個體不存在。 | diagnosis |
| 400 | Abs.InvalidBillingPeriod | The specified billing period is invalid. | 指定的計費週期無效。 | diagnosis |
| 400 | Abs.InvalidBillingType | The specified billing type is invalid. | 指定的計費類型不可用。 | diagnosis |
| 400 | Abs.InvaliTableName.Malformed | Table name format is invalid. | 無法修改路由表屬性，表名格式無效。 | diagnosis |
| 500 | Abs.Vpc.InnerServiceFailed | Call inner service failed. | 呼叫內部服務失敗，請稍後重試。 | diagnosis |
| 400 | Abs.Vpc.InvalidName.Malformed | The specified Name is not valid. | 傳入的Name無效。 | diagnosis |
| 400 | ACCESS.DEVICE.NOT.ALLOW.WITHOUT.SP | Access device not allow direct enable physical connection | 接入設備不允許直接啟用實體連接埠。 | diagnosis |
| 400 | AccessPoint.NotFound | The input access point does not exist or does not have permission to view it. | 輸入的接入點不存在或者沒有權限查看。 | diagnosis |
| 400 | AccountBalanceForVpn.NotFull | The user's account balance for purchasing the VPN is insufficient. | 使用者購買VPN的帳戶餘額不足。 | diagnosis |
| 400 | AccountMoneyValidateError | The available amount of the account is insufficient. | 帳號可用金額不足。 | diagnosis |
| 400 | ACCOUNT_BALANCE_EXCEEDED | User attempted to create a new order.but user account balance is insufficient. | 帳號餘額不足。 | diagnosis |
| 400 | ALIUID.NOT.ALLOW.WITHOUT.SP | AliUid not allow direct enable physical connection | AliUid不允許直接啟用實體連接埠。 | diagnosis |
| AllocateIpFailed | Alloc bandwidthPackage ips failed | 為共用頻寬包分配公網IP失敗。 | diagnosis | |
| 400 | AnotherJobTesting | There is another job which is testing. | 同一個使用者在同一個地域只能同時進行一個故障演練任務。 | diagnosis |
| ARREARAGE | 指定的帳號已欠費。 | diagnosis | ||
| 400 | AttrMismatching.BandwidthPackageIpVersion | The IpVersion of the IpInstance does not match the IpVersion of the BandwidthPackage. | Eip執行個體與共用頻寬的IpVersion不匹配。 | diagnosis |
| 400 | AttrMismatching.VpcDhcpOptionsSetId | The dhcpOptionsSetId does not match the VPC. | DHCP選項集執行個體ID和VPC不匹配，請檢查DHCP和VPC的對應關係是否正確。 | diagnosis |
| AUTH.RAM_AUTH_FAILED | RAM帳號身份驗證失敗。 | diagnosis | ||
| 400 | AvailableZoneNotExist | Available zone not exist. | 可用區不存在。 | diagnosis |
| BandwidthPackage.FinancialLocked | The specified BandwidthPackage has been Financail Lock. | 該頻寬包被欠費鎖定。 | diagnosis | |
| BandwidthPackage.QuotaExceeded | 頻寬包數量已超過限制。 | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBandwidth | You cannot add the hybrid cloud EIP to the bandwidth package. The bandwidth of the bandwidth package is lower than the EIP bandwidth. | 混合雲端模式的eip不能添加到低頻寬的頻寬包中。 | diagnosis |
| BandwidthPackageId.InvalidBizStatus | 指定的頻寬包已經被金融鎖定，不能添加ip。 | diagnosis | ||
| 400 | BandwidthPackageId.InvalidBizStatus | The specified bandwidth package has an outstanding balance and has been locked. You cannot add any IP address. | 指定的頻寬包已經被金融鎖定，不能添加ip。 | diagnosis |
| BandwidthPackageOperation.conflict | BandwidthPackage operation conflict | 共用頻寬包操作衝突。 | diagnosis | |
| 400 | BindInstanceHasBandwidth | The specified bind instance has bandwidth. | 指定的綁定執行個體已經具有頻寬。 | diagnosis |
| 400 | BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIP | The instance may have portMap or already bind eip. | ECS 執行個體已經存在連接埠轉發規則(DNAT)，請刪除相應的連接埠轉發規則再進行操作。 | diagnosis |
| BIND_INSTANCE_OWENER_ERROR | Cannot operate the eip. | 不能操作這個 EIP。 | diagnosis | |
| 400 | BothEmpty.TagsAndResources | The specified Tags and ResourcesIds are not allow to both empty. | 標籤和資源群組不能同時為空。 | diagnosis |
| 400 | BothEmptyParam.GatewayRouteTableIdAndIpv4GatewayRouteTableId | The parameter GatewayRouteTableId and Ipv4GatewayRouteTableId cannot be empty at the same time. We recommend that you use GatewayRouteTableId. | 參數 GatewayRouteTableId 和 Ipv4GatewayRouteTableId 不能同時為空，建議您使用 GatewayRouteTableId。 | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either %s or %s should be specified. | 入參 Ipv6AddressId 和 Ipv6InternetBandwidthId 不能同時為空。 | diagnosis |
| 400 | BothEmptyParam.Ipv6AddressIdAndIpv6InternetBandwidthId | Either Ipv6AddressId or Ipv6InternetBandwidthId should be specified. | 入參 Ipv6AddressId 和 Ipv6InternetBandwidthId 不能同時為空。 | diagnosis |
| 400 | CashBookInsufficient | No payment method is specified for your account or prepayment balance is insufficient. | 帳戶沒有設定支付方式或預留金額不足。 | diagnosis |
| 400 | ClientIpPool.NetmaskInvalid | The netmask length of client IP pool must be greater than or equal to 16 and less than or equal to 29. | 用戶端 IP 池的網路遮罩長度必須大於等於 16 且小於等於 29。 | diagnosis |
| 400 | ClientIpPool.SubnetInvalid | The specified client IP pool cannot be used. | 目前用戶端網段不可用。 | diagnosis |
| COMMODITY.INVALID_COMPONENT | 銷售模組參數不滿足約束檢查。 | diagnosis | ||
| 400 | COMMODITY.INVALID_COMPONENT | The instance component is invalid. | 銷售模組參數不滿足約束檢查。 | diagnosis |
| 400 | Conflict.CidrReservationMaskAndCidrReservationCidr | The specified VSwitchCidrReservationMask and VSwitchCidrReservationCidr is conflict. | 指定的 VSwitchCidrReservationMask 和 VSwitchCidrReservationCidr 衝突，請根據 API 文件參數說明修改後重試。 | diagnosis |
| CountLimitExceed.HaVipInVpc | Specified Vpc exceeds the quota of max number of ha-vip count. | 超過指定 VPC 的 HAVIP 配額。 | diagnosis | |
| 400 | CountLimitExceed.HaVipOnInstance | The amount of HaVip associated with the specified Instance reach its limits. | 超過執行個體的 HaVip 配額。 | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | There can be 5 route entry to HaVip at most in one route table. | 同路由表中指向 HaVip 的路由數超過限制。 | diagnosis |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | 同路由表中指向 HaVip 的路由數超過限制。 | diagnosis |
| CountLimitExceeded.AssociatedGlobalAccelerationInstanceOnBackendServer | The count of GlobalAccelerationInstances can be associated on one BackendServer has reach the limit . | 一個後端服務執行個體綁定的全球加速執行個體數量達到上限。 | diagnosis | |
| 400 | CountLimitExceeded.HaVipOnECSInstance | The amount of Instance associated with the specified HaVip reach its limits. | 超過 HaVip 的執行個體配額。 | diagnosis |
| 400 | CreateDbrRoutesQuotaFull.QuotaFull | The number of created destination routes exceeds the quota limit. | 建立目的路由數量超過配額限制。 | diagnosis |
| CreateOrderFailed | 訂單建立失敗。 | diagnosis | ||
| 400 | CreatePbrRoutesQuotaFull.QuotaFull | The number of policy routes exceeds the quota limit. | 策略路由數量超過配額限制。 | diagnosis |
| 400 | CreateSslCertsQuotaFull.QuotaFull | Create the number of SSL certificates that exceed the quota limit. | 建立超過配額限制的 SSL 憑證數量。 | diagnosis |
| 400 | CreateVpnConnectionsQuotaFull.QuotaFull | The number of VPN connections exceeds the quota limit. | VPN 連線數量超過配額限制。 | diagnosis |
| 400 | CreateVpnUserGatewayQuotaFull.QuotaFull | The number of created VPN customer gateways exceeds the quota. | 建立 VPN 使用者閘道數量超出配額。 | diagnosis |
| 400 | CreateVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 目前 CBN 的狀態不支援建立虛擬交換器（VSwitch）操作。 | diagnosis |
| 400 | CreditPayInsufficientBalance | The balance is insufficient, please contact your channel partner to increase the balance | 額度不足，請聯絡您的通路合作夥伴提升額度。 | diagnosis |
| 400 | CrossAccountAuthorizedVco.NotAllowDelete | Current vpn connection is cross account authorized to cen, should delete cross account authorization first. | 目前 VPN 連線執行個體被跨帳號授權到其他帳號的 CEN，刪除時需要先解除跨帳號授權。 | diagnosis |
| CROSS_BID.FORBIDDEN | Connect RouterInterface across bid is illegal | 禁止為其他站點的使用者建立 VBR。 | diagnosis | |
| 404 | CROSS_BID.FORBIDDEN | Create VBR across bid is illegal | 禁止為其他站點的使用者建立 VBR。 | diagnosis |
| 400 | CustomerGateway.ConflictRouteEntry | The specified customer gateway has conflict with route entry. | 目前使用者閘道和路由存在衝突。 | diagnosis |
| 400 | CustomerGateway.ConflictVpnIp | The customer gateway associated with the IPSec connection should not have the same IP address as the VPN gateway. | 使用者閘道的 IP 與 VPN 閘道 IP 衝突。 | diagnosis |
| 400 | DeleteVSwitch.IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | 目前 CBN 狀態不支援刪除虛擬交換器（VSwitch）操作。 | diagnosis |
| 400 | DeletionProtection.AlreadyEnabled | The resource deletion protection is already enabled. | 資源刪除保護已啟用。 | diagnosis |
| 404 | DeletionProtection.NotExist | The resource deletion protection is not found | 資源刪除保護不存在。 | diagnosis |
| 400 | DeletionProtection.OwnerError | The resource owner error. | 您不是該資源的擁有者，無法操作。 | diagnosis |
| 400 | DeletionProtection.PrePaidNotSupport | The prepaid resource is not support. | 不支援預付費資源。 | diagnosis |
| 400 | DeletionProtection.ResourceNotExist | The resource is not exist. | 資源不存在。 | diagnosis |
| 400 | DeletionProtection.TypeNotSupport | The resource is not support. | 不支援該類型資源。 | diagnosis |
| 400 | DependencyViolation | Resources deployed in the vSwitch have not been deleted. | 無法執行該操作，目前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis |
| DependencyViolation | Some route entry status blocked this operation. | 無法執行該操作，目前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis | |
| 400 | DependencyViolation.%s | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的資源[%s]依賴了[%s]，請先刪除依賴資源後再操作。 | diagnosis |
| 400 | DependencyViolation.AppAccess | Specified object has dependent resources app access. | 該 VPC 存在反向存取授權關係，無法刪除。 | diagnosis |
| 400 | DependencyViolation.Association | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的資源存在依賴關係，請先解除關聯。 | diagnosis |
| DependencyViolation.BandwidthPackages | There are BandwidthPackages on specified NatGateway not deleted. | NAT 閘道上有尚未刪除的頻寬套餐，請刪除 NAT 閘道下的所有頻寬套餐後再重新操作。 | diagnosis | |
| 400 | DependencyViolation.BgpGroup | bgp group exists, cannot delete vbr. | VBR 已經依賴 BgpGroup，不能刪除。 | diagnosis |
| 400 | DependencyViolation.BgpNetwork | bgp network exists, cannot delete vbr. | VBR 存在 BGP 宣告網段設定，不能刪除 VBR。 | diagnosis |
| 404 | DependencyViolation.BgpPeer | Specified object has dependent resources bgp peer. | 存在依賴的 BGP 對端。 | diagnosis |
| 400 | DependencyViolation.CloudService | VSwitch cannot be deleted when uesd by cloud service. | 目前交換器正被雲端服務使用無法刪除，請確認雲端服務使用場景。 | diagnosis |
| 400 | DependencyViolation.CloudServiceResource | The VPC contains CloudServiceResource and cannot be deleted. | 該 VPC 存在雲端服務資源，無法刪除。 | diagnosis |
| 400 | DependencyViolation.CustomRouteTable | CustomRouteTable already exists. | 依賴衝突，存在自訂路由表。 | diagnosis |
| 400 | DependencyViolation.DhcpOptionsSet | The VPC cannot be deleted when it is associated with dhcpOptionsSet. | 目前 VPC 還存在未刪除的 DHCP 選項集執行個體，不允許刪除。 | diagnosis |
| 400 | DependencyViolation.EgressRules | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的資源被其他的資源依賴，不允許進行目前操作。 | diagnosis |
| DependencyViolation.EIPS | 指定的 NAT 閘道已綁定了彈性公網 IP，請先將其從 NAT 閘道解綁。 | diagnosis | ||
| 400 | DependencyViolation.EIPS | There are Eips on specified NatGateway, please unbind it first. | 指定的 NAT 閘道已綁定了彈性公網 IP，請先將其從 NAT 閘道解綁。 | diagnosis |
| 400 | DependencyViolation.EnhancedNatgw | VSwitch cannot be deleted when natgw exist. | 當 NAT 閘道存在時，無法刪除 VSwitch。 | diagnosis |
| DependencyViolation.ForwardEntry | The ip has been used by ForwardEntry. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis | |
| 400 | DependencyViolation.ForwardEntry | The specified BandwidthPackageId has dependent resource. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis |
| 400 | DependencyViolation.FullNatEntry | The fullnat entry depends on this nat ip,so the operation cannot be completed. | 存在 Fullnat 設定條目依賴此 NAT IP，因此本操作不能完成。 | diagnosis |
| 400 | DependencyViolation.GatewayEndpoint | The VPC contains endpoints and cannot be deleted. | VPC 中還有終端節點，不能被刪除，請先刪除該 VPC 中的終端節點再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.GatewayRouteTableRelation | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的資源被其他的資源依賴，不允許進行目前操作。 | diagnosis |
| 400 | DependencyViolation.GreTunnel | There is Gre tunnel on specified vpn gateway not deleted. | 指定的 VPN 閘道上有 Gre 隧道未刪除。 | diagnosis |
| 400 | DependencyViolation.HaVip | VSwitch cannot be deleted when there are some HaVip dependent with it. | 無法刪除交換器，該交換器下有關聯的 HaVip。 | diagnosis |
| DependencyViolation.HaVipAssociatedWithEIP | HaVip cannot be deleted when it is associated with EIP. | 無法刪除 HAVIP，該 HAVIP 繫結了 EIP。 | diagnosis | |
| DependencyViolation.HaVipReferedByRouteEntry | HaVip cannot be deleted when it is refered by a route table entry as next hop. | 作為路由條目下一跳 HaVip 不能被刪除，請先刪除指向該 HaVip 的路由條目後再進行刪除。 | diagnosis | |
| DependencyViolation.Instance | Specified object has dependent resources | 目前 VPC 還存在未刪除的雲端產品執行個體，VPC 刪除失敗。 | diagnosis | |
| 404 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | 目前 VPC 還存在未刪除的雲端產品執行個體，VPC 刪除失敗。 | diagnosis |
| DependencyViolation.ip | 指定的 NAT 閘道已繫結了一個彈性公網 IP。 | diagnosis | ||
| 400 | DependencyViolation.IpPrefix | DependencyViolation.IpPrefix | 該資源已分配 IpPrefix，請刪除 IpPrefix 後重試。 | diagnosis |
| DependencyViolation.Ips | 指定的共用頻寬包已繫結。 | diagnosis | ||
| 400 | DependencyViolation.IpsecServer | the resource cannot be deleted because the resource has an ipsec server dependency. | 指定的 VPN 閘道上有 Ipsec VPN 服務端未刪除。 | diagnosis |
| 400 | DependencyViolation.Ipv4Gateway | The VPC cannot be deleted when it has ipv4Gateway. | 該 VPC 下存在 IPv4 閘道，無法刪除。 | diagnosis |
| 400 | DependencyViolation.Ipv6Address | The specified resource of %s depends on %s, so the operation cannot be completed. | 您指定的資源被其他的資源依賴，不允許進行目前操作。 | diagnosis |
| 400 | DependencyViolation.IPv6CidrReservation | The specified resource of [%s] depends on [%s], so the operation cannot be completed. | 操作的資源[%s]依賴了 IPv6 預留網段，請先刪除依賴資源後再操作。 | diagnosis |
| 400 | DependencyViolation.Ipv6Gateway | The VPC contains IPv6Gateway and cannot be deleted. | 該 VPC 存在 IPv6 閘道，無法刪除。 | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified resource of %s depends on %s, so the operation cannot be completed. | 指定的 IPv6 執行個體已開通 IPv6 頻寬，請釋放 IPv6 頻寬後再操作。 | diagnosis |
| 400 | DependencyViolation.Ipv6InternetBandwidth | The specified ipv6 instance already exist ipv6 internet bandwidth, so the operation cannot be completed. | 指定的 IPv6 執行個體已開通 IPv6 頻寬，請釋放 IPv6 頻寬後再操作。 | diagnosis |
| 400 | DependencyViolation.MulticastDomain | VSwitch cannot be deleted when associated with multicast domain. | VSwitch 加入了組播域，無法刪除。 | diagnosis |
| 400 | DependencyViolation.NatGateway | Specified object has dependent resources NatGateway. | VPC 中還有 NAT 閘道，不能被刪除，請先刪除該 VPC 中的 NAT 閘道再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.NatIp | The specified resource of %s depends on %s, so the operation cannot be completed. | 有依賴的 NAT IP，所以此操作不能進行。 | diagnosis |
| 400 | DependencyViolation.NatIpCidr | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT 有依賴的 NAT IP CIDR，所以此操作不能進行。 | diagnosis |
| 400 | DependencyViolation.NetworkAcl | Specified object has dependent resources network acl. | 當存在網路 ACL 時，無法刪除 VSwitch。 | diagnosis |
| 400 | DependencyViolation.NetworkAcl | VSwitch cannot be deleted when network acl exist. | 當存在網路 ACL 時，無法刪除 VSwitch。 | diagnosis |
| 400 | DependencyViolation.Nqa | nqa exists, cannot delete vbr. | NQA 存在，無法刪除 VBR。 | diagnosis |
| 400 | DependencyViolation.OppositeRouterInterface | Failed to delete the VPC because it has peer router interfaces. | 該 VPC 存在對端 RouterInterface 未刪除，刪除 VPC 失敗。 | diagnosis |
| 400 | DependencyViolation.PrefixListRelation | The specified resource of prefixList depends on prefixList relation, so the operation cannot be completed. | 由於 PrefixList 還存在引用關係，所以無法刪除 PrefixList。 | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | Dependent resources exist. | %s 資源依賴於 %s，因此本操作不能完成。 | diagnosis |
| 400 | DependencyViolation.PrivateLinkMode | The specified resource of %s depends on %s, so the operation cannot be completed. | %s 資源依賴於 %s，因此本操作不能完成。 | diagnosis |
| 400 | DependencyViolation.QosTable | DependencyViolation.QosTable | 有依賴的保護性限速規則。 | diagnosis |
| 400 | DependencyViolation.RouteEntry | Specified object has dependent resources | 目前資源仍被路由條目所依賴。 | diagnosis |
| DependencyViolation.RouteInterface | Specified object has dependent route interface . | 指定的虛擬交換器連接了路由器介面，無法刪除。 | diagnosis | |
| 400 | DependencyViolation.RouterEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT 有依賴的路由條目，所以此操作不能進行。 | diagnosis |
| DependencyViolation.RouterInterface | Specified object has dependent resources RouterInterface. | 該物件有關聯的路由器介面。 | diagnosis | |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | RouterInterface cannot be deleted when it is refered by a route table entry as next hop. | VBR 已經被引用。 | diagnosis |
| 400 | DependencyViolation.RouterInterfaceReferedByRouteEntry | The specified VirutalBorderRouter is refered by routeEntry. | VBR 已經被引用。 | diagnosis |
| 400 | DependencyViolation.RouteTable | VSwitch cannot be deleted when associated with route table. | VSwitch 已繫結路由表，不允許刪除。 | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources | 當前 VPC 還存在未刪除的安全性群組[%s]，VPC 刪除失敗，請先刪除該 VPC 下的安全性群組後再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Specified object has dependent resources SecurityGroup. | 當前 VPC 還存在未刪除的安全性群組[%s]，VPC 刪除失敗，請先刪除該 VPC 下的安全性群組後再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.SecurityGroup | Security group [%s] exists in the VPC, so the VPC cannot be deleted. | 當前 VPC 還存在未刪除的安全性群組[%s]，VPC 刪除失敗，請先刪除該 VPC 下的安全性群組後再刪除 VPC。 | diagnosis |
| 400 | DependencyViolation.SharedIpv6InternetBandwidth | The IPv6 gateway [%s] has IPv6 address [%s] that enabled internet from share user [%s], please delete it and try again later. | 此 IPv6 閘道[%s]下的位址[%s]開通了公網頻寬，來自於共享使用者[%s]，請刪除後重試。 | diagnosis |
| 400 | DependencyViolation.ShareResource | The specified resource of prefixList depends on share resource, so the operation cannot be completed. | 由於 PrefixList 存在共享關係，所以無法刪除 PrefixList。 | diagnosis |
| 400 | DependencyViolation.SNAT | The vswitch cannot be deleted when used by snat. | 當 SNAT 使用時，無法刪除 VSwitch。 | diagnosis |
| DependencyViolation.SnatEntry | The ip has been used by SnatEntry. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis | |
| 400 | DependencyViolation.SnatEntry | The specified BandwidthPackageId has dependent resource. | NatIp 或 Ipv4Prefix 存在關聯的 SnatEntry，刪除操作無法繼續，請刪除依賴的 Snat 後再重新刪除。 | diagnosis |
| 400 | DependencyViolation.SslVpnServer | There is SSL VPN server on specified vpn gateway not deleted. | 指定的 VPN 閘道上有 SSL VPN 服務端未刪除。 | diagnosis |
| 400 | DependencyViolation.TrafficMirrorSession | Some traffic mirror sessions depend on the specified resource. | 存在流量鏡像會話仍依賴於當前資源。 | diagnosis |
| 400 | DependencyViolation.TransitRouter | Specified object has attached to Transit Router. | 您指定的資源被其他的資源依賴，不允許進行當前操作。 | diagnosis |
| DependencyViolation.Tunnel | Specified object has dependent tunnel. | 該物件有關聯的隧道。 | diagnosis | |
| 400 | DependencyViolation.VpcAttachment | DhcpOptionsSet cannot be deleted when it is attached to VPC. | DHCP 選項集已繫結 VPC，不允許刪除。 | diagnosis |
| 400 | DependencyViolation.VpcEndpointService | The specified resource of %s depends on %s, so the operation cannot be completed. | NAT 有依賴的終端節點服務，所以此操作不能進行。 | diagnosis |
| DependencyViolation.VpnConnection | There are VpnConnections on specified CustomerGateway not deleted. | 指定的使用者閘道上有 VPN 連線未刪除。 | diagnosis | |
| 400 | DependencyViolation.VpnConnection | There are vpn connections on specified customer gateway not deleted. | 指定的使用者閘道上有 VPN 連線未刪除。 | diagnosis |
| 400 | DependencyViolation.VSwitch | Specified object has dependent resources | 當前 VPC 還存在未刪除的交換機，VPC 刪除失敗，刪除 VPC 下的交換機後再嘗試刪除 VPC。 | diagnosis |
| 404 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | 該 VSwitch 存在 VSwitchCidrReservation 使用中，不允許刪除。 | diagnosis |
| 400 | Dnat.MultiSource.QuotaExceeded | The destination port can not be mapped more. Because the destination port map count has exceeded quota | 目標 IP 連接埠被映射數超過配額。 | diagnosis |
| 400 | DryRunOperation | Request validation has been passed with DryRun flag set. | DryRun 校驗通過。 | diagnosis |
| 400 | Duplicated.ClientToken | The param of ClientToken is duplicated. | 指定的 ClientToken 存在重複。 | diagnosis |
| 400 | Duplicated.IpAddress | IP [%s] is duplicated. | 指定的 IP 位址存在重複 IP，請按 API 文件參數說明修改後再重試。 | diagnosis |
| 400 | Duplicated.SecondaryCidrBlock | The param of SecondaryCidrBlock is duplicated. | 指定的 SecondaryCidrBlock 存在重複。 | diagnosis |
| 400 | Duplicated.TagKey | The specified parameter TagKey is duplicated. | 指定的參數 TagKey 重複。 | diagnosis |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | 下一個重複的路由條目。 | diagnosis |
| 400 | DuplicatedParam.%s | The param of %s is duplicated. | 參數重複。 | diagnosis |
| 400 | DuplicatedParam.CidrBlock | The param of cidrBlock is duplicated. | 傳入了重複的 cidrBlock。 | diagnosis |
| 400 | DuplicatedParam.CidrBlockAndCidrMask | CidrBlock and CidrMask cannot be specified at the same time. | 給位址池新增位址段失敗，因為位址段和位址遮罩不能同時輸入。 | diagnosis |
| 400 | DuplicatedParam.ExternalPort | The param of %s is duplicated. | DNAT 公網連接埠 %s 已被重複佔用。 | diagnosis |
| 400 | DuplicatedParam.InternalPort | The param of %s is duplicated. | InternalPort 參數重複或已被佔用。 | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | Duplicated LocalGatewayIp values. | 參數重複。 | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The LocalGatewayIp values are duplicated. | 參數重複。 | diagnosis |
| 400 | DuplicatedParam.LocalGatewayIp | The param is duplicated. | 參數重複。 | diagnosis |
| 400 | DuplicatedParam.LocalIpAddress | The LocalIpAddress already exists. | 本端 IP 位址參數有重複，請更換本端 IP 後重試。 | diagnosis |
| 400 | DuplicatedParam.LocalIpv6Address | The LocalIpv6Address already exists. | 本端 IP 位址參數有重複，請更換本端 IP 後重試。 | diagnosis |
| 400 | DuplicatedParam.LocalIpv6GatewayIp | Duplicated LocalIpv6GatewayIp values. | 本端 IP 位址重複。 | diagnosis |
| 400 | DuplicatedParam.PeerGatewayIp | Duplicated PeerGatewayIp values. | 互聯 IP 位址重複，請更換後重試。 | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param of PeerIpAddress is duplicated. | 參數值存在重複。 | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | Duplicated peer IP addresses. | 參數值存在重複。 | diagnosis |
| 400 | DuplicatedParam.PeerIpAddress | The param is duplicated. | 參數值存在重複。 | diagnosis |
| 400 | DuplicatedParam.PeerIpv6Address | The PeerIpv6Address already exists. | 對端 IP 位址參數有重複，請更換對端 IP 後重試。 | diagnosis |
| 400 | DuplicatedParam.PeerIpv6GatewayIp | Duplicated PeerIpv6GatewayIp values. | 對端 IP 位址重複。 | diagnosis |
| 400 | DuplicatedParam.Priority | The specified priority conflicts with the existing priority. | 指定的優先順序參數與已有的優先順序重複。 | diagnosis |
| 400 | DuplicatedParam.SourceInstanceIds | The parameter of source instance IDs contains duplicate values. | 流量鏡像來源執行個體 ID 參數中包含重複值。 | diagnosis |
| 400 | DuplicatedParam.TrafficPath | The param of trafficPath is duplicated. | 傳入的 trafficPath 參數中存在重複的數值。 | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateCrossAccountVbr | The specified Pconn associated with Qos is not allowed to create cross account VBR.Please contact the business manager. | 繫結了 Qos 策略的共用實體專線不允許建立跨帳號虛擬邊界路由器，請聯繫商務經理。 | diagnosis |
| 400 | EcAssociatedQoSPconnNotAllowCreateVpconn | The specified Pconn associated with Qos is not allowed to create Vpconn.Please contact the business manager. | 繫結了 Qos 策略的獨享實體專線不允許建立共用實體專線，請聯繫商務經理。 | diagnosis |
| 400 | EcDeviceNotSupportQoS | The specified Pconn is on the device which is not supported QoS. | 實體專線所在的裝置不支援 Qos 特性。 | diagnosis |
| 400 | EcFailoverTestJobConflict | The current failover test job task is in operation, please try again later. | 目前的故障演練任務正在操作中，請稍後重試。 | diagnosis |
| 400 | EcFailoverTestJobExceedMaxResourceNum | The input resource number is exceeded the quota of 16. | 故障演練任務最多可以新增 16 個資源。 | diagnosis |
| 400 | EcFailoverTestJobResourceInAnotherProcessingJob | There is another processing failover test job. | 目前使用者已經存在一個正在進行的故障演練任務，請完成後再重試。 | diagnosis |
| 400 | EcFailToGetAp | Fail to get access point details. | 無法查詢到對應接入點資訊。 | diagnosis |
| 404 | EcGrantRelation.NotExist | The ec grant relation not exist. | 此高速通道授權關係不存在。 | diagnosis |
| 400 | EcNotEnoughResource | Insufficient access point resources. | 接入點資源不足。 | diagnosis |
| 400 | EcNotSupportRegion | High reliable physical connection is not support in this region. | 高可靠實體專線在本區域暫時不支援售賣。 | diagnosis |
| 400 | EcPconnVbrMustContainsAll | In the single VBR with multiple Pconn scene, all Pconn must be associated with the same Qos. | 單 VBR 多 Pconn 場景，必須將所有的 Pconn 都繫結 QoS 策略。 | diagnosis |
| 400 | EcPconnWithCrossAccountVbrNotAllowAssociateQoS | The specified Pconn with cross account VBR is not allowed to associate with Qos. | 包含跨帳號虛擬邊界路由器的獨享實體專線不允許繫結 Qos 策略。 | diagnosis |
| 400 | EcPconnWithVpconnNotAllowAssociateQoS | The specified Pconn with Vpconn is not allowed to associate with Qos. | 包含共用實體專線的獨享實體專線不允許繫結 Qos 策略。 | diagnosis |
| 400 | EcQoSConflict | The specified QoS is conflict with other QoS. | 目前 Qos 設定與其他設定衝突，請稍後再試。 | diagnosis |
| 400 | EcQosRuleNotAllowV4AndV6 | QoS rules do not allow IPv4 and IPv6 addresses to be mixed and updated. | 不允許一條 QoS 規則內同時存在 IPv4 位址設定和 IPv6 位址設定，與此同時若原有的設定網路類型為 IPv4 不允許修改為 IPv6（反之亦然），請您檢查後修改。 | diagnosis |
| 400 | EcQoSWithPconnNotSupportDelete | The Qos policy associated with Pconn cannot be deleted. Please disassociate it first. | 您目前的 Qos 策略已關聯了實體專線，無法直接刪除，請先解除關聯後再次重試。 | diagnosis |
| EipOperation.TooFrequently | 該 EIP 加入頻寬包過於頻繁，請稍後重試。 | diagnosis | ||
| 400 | EipOperation.TooFrequently | The operation of adding EIP to the bandwidth package is too frequent. Please try again later. | 該 EIP 加入頻寬包過於頻繁，請稍後重試。 | diagnosis |
| EIP_BIND_NATGATEWAY | 指定的 EIP 已繫結了 NAT 閘道。 | diagnosis | ||
| EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IP | instance already bind natpublicip | 該執行個體已有公網 IP。 | diagnosis | |
| EIP_NOT_SUPPORT_SNAT_POOL | 指定的 EIP 不可加入 SNAT 池中。 | diagnosis | ||
| EIP_UNDERSTOCK | There are not enough eip in stock | 庫存的 EIP 數量不足。 | diagnosis | |
| 400 | EnableHaCheck.IpsecConnectionBgpTunnelCidrConflict | There are same bgp tunnel cidr in different connections. The cidr is %s. | 不同 IPsec 隧道 BGP 中存在相同的隧道 CIDR。隧道 CIDR 是 %s。 | diagnosis |
| 400 | EnableHaCheck.IpsecServerCidrContainsVpcRouteDest | Ipsec server client cidr contains vpc route prefix. The vpc route prefix is %s. | VPC 路由表中存在路由的前綴 %s 被包含在 IPsec Server 用戶端 CIDR 中。 | diagnosis |
| 400 | EnableHaCheck.PolicyBasedRoutePrefixConflict | There are policy based routes with the same prefix. The prefix is %s. | 存在相同前綴的策略路由，前綴為 %s。 | diagnosis |
| 400 | EnableHaCheck.RegionNotSupported | Enabling HA Vpn is not supported in the specified region. | 目前區域不支援開啟高可用。 | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix. The prefix is %s. | 存在相同前綴的路由，前綴為 %s。 | diagnosis |
| 400 | EnableHaCheck.RoutePrefixConflict | There are routes with the same prefix, the prefix is %s. | 存在相同前綴的路由，前綴為 %s。 | diagnosis |
| 400 | EnableHaCheck.SslVpnServerClientCidrContainsVpcRouteDest | Ssl vpn client cidr contains vpc route prefix. The vpc route prefix is %s. | VPC 路由表中存在路由的前綴 %s 被包含在 SSL VPN 用戶端 CIDR 中。 | diagnosis |
| 400 | EnableHaCheck.TypeInvalid | The specified gateway type invalid. | 目前 VPN 閘道類型不支援開啟高可用。 | diagnosis |
| 400 | EnableHaCheck.VpnTypeNotSupported | Enabling HA Vpn Only Support Ipsec Vpn or Ssl Vpn. | 開啟高可用，只支援 IPsec VPN 或者 SSL VPN。 | diagnosis |
| 400 | Eni.Attached | The eni should be detached from ecs when associating with direct eip. | 當 ENI 繫結直通 EIP 時，需要 ENI 與 ECS 解除繫結。 | diagnosis |
| EXCEED_ASSOCIATE_MAX_NUM | assocaite virtual boarder num too many. | 關聯的邊界路由器達到配額上限。 | diagnosis | |
| 400 | ExclusiveParam.%sAnd%s | The param of %s and %s are mutually exclusive. | 參數 %s 和 %s 相互排斥。 | diagnosis |
| 400 | ExclusiveParam.AccessModeValueAndAccessTunnelType | The specified param AccessModeValue and AccessTunnelType are mutually exclusive. | 指定的入參 AccessMode.ModeValue 和 AccessMode.TunnelType 存在衝突。 | diagnosis |
| 400 | ExclusiveParam.EnableIpv6AndCidrBlock | The param of EnableIpv6 and CidrBlock are mutually exclusive. | 參數 EnableIpv6 和 CidrBlock 互斥。 | diagnosis |
| 400 | ExclusiveParam.NextHopTypeAndNextHopId | The param of nextHopType and nextHopId are mutually exclusive. | 下一跳類型和下一跳執行個體不匹配。 | diagnosis |
| 400 | ExclusiveParam.PrivateLinkEnabledAndAccessMode | The specified paramPrivateLinkEnabled and AccessMode are mutually exclusive. | 指定的入參 PrivateLinkEnabled 和 AccessMode 存在衝突。 | diagnosis |
| 400 | ExclusiveParam.PrivateLinkModeAndAccessMode | The specified param PrivateLinkMode and AccessMode are mutually exclusive. | 指定的入參 PrivateLinkMode 和 AccessMode 存在衝突。 | diagnosis |
| 400 | ExclusiveParam.ZoneAndIpAddress | The specified param Zone and IpAddress or InstanceId are mutually exclusive. | 指定的入參 Zone 和 IpAddress 或 InstanceId 存在衝突。 | diagnosis |
| 400 | ExclusiveParam.ZoneAndPublicIpAddressPoolId | The Zone and PublicIpAddressPoolId parameters are mutually exclusive. | 不允許同時傳入參數 Zone 和 PublicIpAddressPoolId。 | diagnosis |
| Forbbiden | The eip instance owener error | 使用者沒有權限操作指定的資源。 | diagnosis | |
| Forbbiden | The Router instance owener error | 使用者沒有權限操作指定的資源。 | diagnosis | |
| Forbbiden | Active custom route in vpc. | 使用者沒有權限操作指定的資源。 | diagnosis | |
| Forbbiden | Specified RouteEntry cannot allowed delete by openApi. | 使用者沒有權限操作指定的資源。 | diagnosis | |
| 400 | Forbbiden | The router does not belong to your account. | 該路由器不屬於您的帳號。 | diagnosis |
| 403 | Forbbiden | User not authorized to operate on the specified resource. | 使用者沒有權限操作指定的資源。 | diagnosis |
| 400 | Forbbiden.InvaildOwner | Incorrect RouterInterface owner. | 該路由器不屬於您的帳號。 | diagnosis |
| 400 | Forbbiden.InvaildOwner | The RouterInterface owener error | 路由器擁有者資訊錯誤。 | diagnosis |
| Forbbiden.ModifyIdAndType | Opposite is VBR | 對端是邊界路由器。 | diagnosis | |
| Forbbiden.SubUser | The specified action is not available for you. | 使用者無權限操作此資源。 | diagnosis | |
| Forbbiden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | 使用者無權限操作此資源。 | diagnosis | |
| 403 | Forbbiden.SubUser | User not authorized to operate on the specified resource. | 使用者無權限操作此資源。 | diagnosis |
| Forbedden.NotSupportRAM | This action does not support accessed by RAM mode. | RAM 使用者不支援此操作。 | diagnosis | |
| 403 | Forbidden | User not authorized to operate on the specified resource. | 您沒有權限操作指定資源，請申請權限後再操作。 | diagnosis |
| 403 | Forbidden | You do not have the permissions to manage the specified resource. Apply for the permissions and try again. | 您沒有當前資源管理權限，請申請權限後重試。 | diagnosis |
| 400 | Forbidden | The eip instance owener error | EIP 不屬於當前呼叫者，請您檢查該 EIP 是否可被您呼叫。 | diagnosis |
| 400 | Forbidden | The eip instance owner error | EIP 不屬於當前呼叫者，請您檢查該 EIP 是否可被您呼叫。 | diagnosis |
| 400 | Forbidden.AcceptRoleNotSupportPrePay | Acception side ri not support chargetype for prepaid. | 不支援預付費的費用類型。 | diagnosis |
| 400 | Forbidden.AllocateEipSegmentAddress | Authentication is failed for allocating eip segment address. | 申請連續 EIP 失敗，該服務已下線，請使用 IP 位址池服務。 | diagnosis |
| Forbidden.Already.Bounded | The specified instance already bounded | 執行個體已經被綁定，請不要重複綁定。 | diagnosis | |
| Forbidden.AssociateToVBR | The physical connection still associate to VBR. | 該實體專線已經關聯了邊界路由器。 | diagnosis | |
| Forbidden.BillsOutstanding | You cannot create more RouterInterface because you have bills outstanding. | 無法執行該操作，您有未結算的帳單。 | diagnosis | |
| Forbidden.BillsOutstanding | You cannot use this action because you have bills outstanding. | 無法執行該操作，您有未結算的帳單。 | diagnosis | |
| Forbidden.ChargeTypeIsPrepaid | It's forbidden to release a prepaid EIP | 不允許使用 API 變更預付費 EIP 執行個體的頻寬。您可以透過控制台進行變配。 | diagnosis | |
| Forbidden.ChargeTypeIsPrepaid | It’s forbidden to change prepaid EIP’s bandwidth by API. It can be changed on Aliyun web console. | 不允許使用 API 變更預付費 EIP 執行個體的頻寬。您可以透過控制台進行變配。 | diagnosis | |
| Forbidden.CheckEntryRuleQuota | Route entry quota rule check error. | 檢查路由條目配額時發生了錯誤。 | diagnosis | |
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to modify. | 不允許指定 CircuitCode 參數。 | diagnosis | |
| Forbidden.CircuitCodeNotAllowedByCaller | The caller is not allowed to specify the CircuitCode parameter. | 不允許指定 CircuitCode 參數。 | diagnosis | |
| 400 | Forbidden.Convert | User does not have permission to operate. | 該使用者沒有權限操作。 | diagnosis |
| 400 | Forbidden.CreatePublicIpAddressPool | Authentication is failed for creating public ip address pool. | 您暫時無法建立 PublicIpAddressPool，請檢查帳號是否已授權該操作。 | diagnosis |
| 400 | Forbidden.CrossBorder | User not authorized to create cross border routerInterface. | 使用者無權建立跨境 routerInterface。 | diagnosis |
| Forbidden.DescriptionNotAllowedByCaller | The caller is not allowed to specify the Description parameter. | 不允許指定 Description 參數。 | diagnosis | |
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | 該私網 IP 不在 VPC 的網段範圍內，請您填寫在 VPC 的網段範圍內的私網 IP。 | diagnosis | |
| Forbidden.DestnationIpOutOfVpcCIDR | The specified Destination Ip is Out of VPC CIDR. | 該私網 IP 不在 VPC 的網段範圍內，請您填寫在 VPC 的網段範圍內的私網 IP。 | diagnosis | |
| 400 | Forbidden.DisableRoutePropagation | The operation of disable route propagation is forbidden. | 關閉該路由表的路由傳播不被允許。 | diagnosis |
| Forbidden.DiskNotFound | The specified Disk is not found | 該磁碟不存在。 | diagnosis | |
| 400 | Forbidden.EipInBwp | The EIP has been associated with an EIP bandwidth plan. | 連續 EIP 組中的 EIP 加入共享頻寬，不允許刪除連續 EIP 組。 | diagnosis |
| Forbidden.EnableClassicLink | 僅網段為 172.16.0.0/12、192.168.0.0/16、10.0.0.0/8 的 VPC 能夠開啟 ClassicLink，更多資訊請參考 ClassicLink 功能介紹和使用限制。 | diagnosis | ||
| Forbidden.ExternalIp.UsedInSnatTable | The specified ExternalIp is already used in SnatTable | 該公網 IP 已經被 SNAT 使用，請更換其他公網 IP 或將目前公網 IP 的 SNAT 規則刪除。 | diagnosis | |
| 400 | Forbidden.FinancialLocked | The instance is locked due to outstanding payments. | 該執行個體已欠費鎖定，無法操作。 | diagnosis |
| 400 | Forbidden.FinancialLocked | The ip business status is invalid. | 該執行個體已欠費鎖定，無法操作。 | diagnosis |
| 400 | Forbidden.FinancialLocked | The router interface has been locked due to overdue payments. | 路由器介面由於欠費被鎖定，無法操作。 | diagnosis |
| 400 | Forbidden.FinancialLocked | The router interface is locked due to overdue payments. | 由於未清帳單，此路由器介面已被鎖定。 | diagnosis |
| 400 | Forbidden.FinancialLocked | RouterInterface can not be operated by this action when it's FinancialLocked. | 當路由介面欠費時，無法進行此操作。 | diagnosis |
| Forbidden.FinancileLocked | This RouterInterface is financiel locked because of bills outstanding. | 該路由器介面已欠費鎖定，因為您有未結算的帳單。 | diagnosis | |
| Forbidden.GlobalAccelerationInstanceChargeTypeIsPrepaid | 預付費的全球加速執行個體無法釋放。 | diagnosis | ||
| 400 | Forbidden.HaVip | No permissions to perform operations on HAVIPs. Please apply for privilege--vpc_privilege_allow_buy_havip_instance. | 操作 HaVip 沒有權限，請到配額中心申請權限。 | diagnosis |
| Forbidden.ImageNotFound | The specified Image is not found | 該映像不存在。 | diagnosis | |
| Forbidden.InstanceNotFound | The specified Instance is not found | 該執行個體不存在，請您檢查填寫的執行個體是否正確。 | diagnosis | |
| Forbidden.InternalIpOutOfVpcCIDR | The specified Internal Ip is Out of VPC CIDR. | 該私網 IP 不在 VPC 的網段範圍內。 | diagnosis | |
| 400 | Forbidden.IpHasBeenUsedInDnat | The snat ip can not be used. Because it has been used in dnat | 此 IP 已經被 DNAT 使用，不能用於 SNAT。 | diagnosis |
| 400 | Forbidden.IpHasBeenUsedInDnat | The SNAT entries cannot use this EIP. Because it is already used in DNAT entries (arbitrary port mapping). | SNAT 條目不能使用此 EIP。因為已經在 DNAT 條目(任意連接埠映射)中被使用。 | diagnosis |
| 400 | Forbidden.IpHasBeenUsedInSnat | The source ip can not be used. Because it has been used in snat. | 此來源 IP 不能被使用，因為已經用於 SNAT。 | diagnosis |
| Forbidden.IpUsedInForwardTable | The specified SnatIp already used in forward table | 該公網 IP 已經被 DNAT 使用，請更換其他公網 IP 位址或將目前公網 IP 的 DNAT 規則刪除。 | diagnosis | |
| Forbidden.LocalGatewayIpNotAllowedByCaller | The caller is not allowed to specify the LocalGatewayIp parameter. | 不允許指定 LocalGatewayIp 參數。 | diagnosis | |
| 403 | Forbidden.ModifyEipBondType | Authentication is failed for modify EIP bond type. | 不允許修改 EIP 繫結類型。 | diagnosis |
| 400 | Forbidden.MultiDirectEip | No permission to bind multi direct eip. | 沒有權限繫結多直通 eip。 | diagnosis |
| Forbidden.MultiVlanRi | Multiple vlan router interfaces are found. | 存在多個 VLAN 路由器介面。 | diagnosis | |
| Forbidden.NameNotAllowedByCaller | The caller is not allowed to specify the Name parameter. | 不允許指定 Name 參數。 | diagnosis | |
| 400 | Forbidden.NatPayBySpec | Pay-by-specification NAT is no longer supported. Newly purchased pay-as-you-go NAT gateways only support the pay-by-CU metering method. | 按規格計費的 NAT 閘道已經不再進行售賣，請選擇按 CU 使用量計費的 NAT 閘道。 | diagnosis |
| 400 | Forbidden.NoPermission | User does not have permission to operate. | 使用者沒有操作權限。 | diagnosis |
| Forbidden.NoRiFound | No vlan router interfaces are found. | 沒有可用的 VLAN 路由器介面。 | diagnosis | |
| 400 | Forbidden.NotAllowedCategary | The System tag is not valid | 系統 tag 無效。 | diagnosis |
| Forbidden.NotAllowedInState | The request does not allow in this state. | 該狀態無法執行請求。 | diagnosis | |
| 400 | Forbidden.NotInAllowDeleteStatus | Only physical connection in the Cancelled, Rejected, Terminated, Allocated, or AllocationFailed states can be deleted. | 只有處於已取消、已拒絕、已終止、已分配、分配失敗狀態的實體專線才可以被刪除。 | diagnosis |
| Forbidden.NotInRouterInterfaceCreateWhitelist | Not in router interface create whitelist. | 不在路由器介面的白名單中。 [errors | diagnosis | |
| 400 | Forbidden.NotSameAccessDevice | Vbr and physicalConnection are not on the same accessDevice. | Vbr和實體連線不在同一存取裝置上。 | diagnosis |
| Forbidden.OnlyOneConnection | Cannot connect concurrently between same routers | 該路由器已有路由器介面連線。 | diagnosis | |
| Forbidden.OnlyOneConnection | The Specified routers have a connection already | 該路由器已有路由器介面連線。 | diagnosis | |
| 400 | Forbidden.OpenPublicIpAddressPool | Authentication is failed for opening public ip address pool. Please apply for permission at the quota center. | 開通IP位址池服務失敗，請到配額中心申請權限。 | diagnosis |
| 400 | Forbidden.OperateCustomRouteTable | The operation is forbidden because publish route entry in custom route table. | 操作被禁止，因為不允許發佈自訂路由表中的路由條目。 | diagnosis |
| 400 | Forbidden.OperateManagedFlowLog | Authentication is failed for operate managed flowlog. | 操作託管的流日誌，鑑權失敗。 | diagnosis |
| 400 | Forbidden.OperateShareResource | You cannot operate shared resources. | 來自共享的資源不允許操作。 | diagnosis |
| 403 | Forbidden.OperationDeleteNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | 此使用者不允許刪除此邊界路由器。 | diagnosis |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to delete the specified VirtualBorderRouter. | 不允許恢復邊界路由器。 | diagnosis | |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | 不允許恢復邊界路由器。 | diagnosis | |
| Forbidden.OperationNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | 不允許恢復邊界路由器。 | diagnosis | |
| 403 | Forbidden.OperationRecoverNotAllowedByUser | The caller is not allowed to recover the specified VirtualBorderRouter. | 此使用者不允許恢復此邊界路由器。 | diagnosis |
| 403 | Forbidden.OperationTerminateNotAllowedByUser | The caller is not allowed to terminate the specified VirtualBorderRouter. | 此使用者不允許終止此邊界路由器。 | diagnosis |
| 400 | Forbidden.OwnerAliUid | RAM account or Partner account is forbidden to be OwnerAliUid. | VbrOwnerId為RAM帳號或合作夥伴帳號，禁止作為VBR所屬帳號。 | diagnosis |
| Forbidden.PeerGatewayIpNotAllowedByCaller | The caller is not allowed to specify the PeerGatewayIp parameter. | 不允許指定PeerGatewayIp參數。 | diagnosis | |
| Forbidden.PeeringSubnetMaskNotAllowedByCaller | The caller is not allowed to specify the PeeringSubnetMask parameter. | 不允許指定PeeringSubnetMask參數。 | diagnosis | |
| 400 | Forbidden.PhysicalConnection | Authentication is failed for PhysicalConnectionId | 沒有操作PhysicalConnectionId權限。 | diagnosis |
| 400 | Forbidden.PhysicalConnection | Only the parent physical connect account is allowed to update these parameters. | 只有共享連接埠所屬的實體連接埠帳號允許修改這些參數。 | diagnosis |
| 400 | Forbidden.PhysicalConnection | Only parent physical connection account is allowed to modify the virtual physical connection. | 只有共享連接埠所屬的實體連接埠允許修改。 | diagnosis |
| Forbidden.RAM | User not authorized to operate on the specified resource | RAM校驗不通過。 | diagnosis | |
| 400 | Forbidden.RAM | The user is not authorized to operate on the specified resource, or the API operation does not support RAM. | RAM校驗不通過。 | diagnosis |
| Forbidden.RegionNotFound | Specified region is not found during access authentication. | 當前Region不支援。 | diagnosis | |
| 404 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | 當前Region不支援。 | diagnosis |
| Forbidden.RiskControl | This operation is forbidden by Aliyun RiskControl system. | 該操作被風險控制系統禁止。 | diagnosis | |
| Forbidden.SecurityGroupNotFound | The specified SecurityGroup is not found | 該安全性群組不存在。 | diagnosis | |
| Forbidden.SnapshotNotFound | The specified Snapshot is not found | 該快照不存在。 | diagnosis | |
| Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach it?s limit. | SNAT條目數量已達到配額。 | diagnosis | |
| 400 | Forbidden.SnatEntryCountLimited | SNAT entry in the specified SNAT table reach its limit. | SNAT條目數量已達到配額。 | diagnosis |
| Forbidden.SourceVSwitchId.Duplicated | The specified SourceCIDRis duplicated. | 該交換機已設定了 SNAT 規則，請您不要重複設定。 | diagnosis | |
| 400 | Forbidden.SourceVSwitchId.IncludeHaVip | There is some HaVips under specified VSwitch | 該交換機下有關聯的HaVip。 | diagnosis |
| 403 | Forbidden.SubUser | User not authorized to operate on the specified resource as your account is created by another user. | 您沒有權限操作該資源，請您申請操作權限後再試。 | diagnosis |
| 400 | Forbidden.TagKey.Duplicated | The specified tag key already exists. | 標籤資源重複。 | diagnosis |
| 400 | Forbidden.TagKeys | The request do not allow to operate the tag keys | 沒有權限操作TagKeys。 | diagnosis |
| 400 | Forbidden.TagKeys | The request does not allow operate this tagkeys | 該請求不允許操作此 tagkey。 | diagnosis |
| 400 | Forbidden.TransitRouterAttachmentExist | The operation is not allowed because transit router attachment still exists. | 不允許刪除VPC，因為TR連線仍存在。 | diagnosis |
| Forbidden.UnassociateMaster | Unassociating a master instance is not allowed unless the parameter Force is True. | 非強制解綁時，不允許解綁master執行個體。 | diagnosis | |
| Forbidden.VbrAttached | cannot terminate physical connection when virtual border routers are still attached. | 無法終止專線接入，因為該專線尚有關聯的邊界路由器。 | diagnosis | |
| Forbidden.VBRExists | physical connection owner's vbr still exists. | vbr仍然存在，無法刪除連接埠。 | diagnosis | |
| Forbidden.VBRExists | vbr owner's vbr still exists. | vbr仍然存在，無法刪除連接埠。 | diagnosis | |
| 400 | Forbidden.VBRExists | The vbr still exists. | vbr仍然存在，無法刪除連接埠。 | diagnosis |
| 400 | Forbidden.VbrNotAllowModifySiteLink | Can not modify virtualBorderRouter site link, please request authority. | 不能修改邊界路由器的跨地域連線，請申請權限。 | diagnosis |
| Forbidden.VlanIdNotAllowedByCaller | The caller is not allowed to specify the VlanId. | 不允許指定VLAN ID。 | diagnosis | |
| 400 | Forbidden.VpcNotFound | Specified VPC can not found. | 指定的VPC不存在，請您檢查VPC是否正確。 | diagnosis |
| 400 | Forbidden.VpconnAliUid | Vpconn UID is forbidden to belong to a RAM account or partner account. | 共享連接埠UID不能是RAM帳號或者合作夥伴帳號。 | diagnosis |
| 400 | Forbidden.VRouterNotFound | specified virtual switch is not found during access authentication. | 在存取鑑權時未找到指定的虛擬交換機。 | diagnosis |
| ForbiddenAction | The user dose not supported this action. | 您沒有所需的權限。 | diagnosis | |
| 400 | ForbiddenAction | The user does not supported this action. | 使用者權限不支援。 | diagnosis |
| 400 | ForbiddenAction | The user does not support this action. | 您沒有所需的權限。 | diagnosis |
| ForbiddenRelease | Forbidden to release a prepaid instance within validity period | 不允許在合約期內釋放預付費執行個體。 | diagnosis | |
| FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAY | The Specified CIDR must be in vpc CIDR. | 該網段必須是VPC網段的子集。 | diagnosis | |
| Forbindden | The specified Instance already bind eip | 該執行個體已經綁定了 EIP，請將 ECS 執行個體與 EIP 解綁後再添加該連接埠轉發規則。 | diagnosis | |
| ForwardEntry.Duplicated | The specified ExternalIp | 指定的IP已經存在，請您重新填寫IP。 | diagnosis | |
| 400 | FrequentPurchase.EIP | The EIP is purchased too frequently. | 偵測到您近期存在頻繁購買和釋放EIP的行為，暫時無法進行新購。 | diagnosis |
| FUWU_BIZ_COMMODITY_VERIFY_FAIL | 你购买的模块非法 | 你購買的模組非法。 | diagnosis | |
| 403 | GetNetworkInterfaceInfoError | Failed to obtain information of secondary ENIs. | 查詢輔助彈性網路卡資訊失敗。 | diagnosis |
| 400 | HaveConnectionBetweenRouters | Have connection between routers | 兩個路由器之間已經建立了連線。 | diagnosis |
| 400 | IAbs.InvalidStatus.ValueNotSupported | status is not supported. | status參數無效。 | diagnosis |
| 400 | Idempotence.Processing | Idempotence request is processing. | 被冪等請求處理中。 | diagnosis |
| IdempotentParameterMismatch | Request uses a client token in a previous request but is not identical to that request. | 請求使用的client token不一致。 | diagnosis | |
| 400 | IellgalParameter.OwnerAccount | The specified parameter OwnerAccount is not valid. | 指定參數 OwnerAccount 不合法。 | diagnosis |
| 400 | IllegalParam.%s | The param of %s is illegal. | 指定的參數非法。 | diagnosis |
| 400 | IllegalParam.AccessModeValue | The request parameter AccessMode.ModeValue is illegal. | 請求參數中AccessMode.ModeValue參數不合法。 | diagnosis |
| 400 | IllegalParam.AccessTunnelType | The request parameter AccessMode.TunnelType is illegal. | 請求參數中AccessMode.TunnelType參數不合法。 | diagnosis |
| 400 | IllegalParam.Action | The specified Action is invalid. | 動作參數不合法。 | diagnosis |
| 400 | IllegalParam.AddressPoolType | The specified addressPoolType is invalid. | 指定的位址池類型無效。 | diagnosis |
| 400 | IllegalParam.AddressType | The specified AddressType is illegal. | 指定的入參AddressType非法。 | diagnosis |
| 400 | IllegalParam.AggregationInterval | The param of aggregationInterval is illegal. | 取樣間隔參數輸入不合法。 | diagnosis |
| 400 | IllegalParam.AnyPortNotZero | Any port port must be zero. | 參數非法，DNAT轉發協議為Any時，來源連接埠和目標連接埠必須為0。 | diagnosis |
| 400 | IllegalParam.Asn | The specified Asn is invalid. | 指定的Asn不合規範。 | diagnosis |
| 400 | IllegalParam.AssociatedInstanceId | The parameter of AssociatedInstanceId is illegal. | 參數AssociatedInstanceId非法。 | diagnosis |
| 400 | IllegalParam.AssociatedPhysicalConnections | The specified AssociatedPhysicalConnections is illegal. | 指定的AssociatedPhysicalConnections不合法。 | diagnosis |
| 400 | IllegalParam.AttachmentId | The attachment is invalid. | Attachment非法。 | diagnosis |
| 400 | IllegalParam.AuthMethod | One authentication method (Psk or IDaaS) should be specified at least. | 至少有一種認證方法（Psk或者IDaas）應該被指定。 | diagnosis |
| 400 | IllegalParam.Bandwidth | The specified Bandwidth is invalid. | 傳入的頻寬不合法。 | diagnosis |
| 400 | IllegalParam.Bandwidth | The param of Bandwidth [%s] is illegal. | 傳入的頻寬不合法。 | diagnosis |
| 400 | IllegalParam.Bandwidth | Illegal Param of Bandwidth. | Bandwidth參數不合法。 | diagnosis |
| 400 | IllegalParam.Bandwidth | The param of bandwidth is illegal. | Bandwidth參數非法。 | diagnosis |
| 400 | IllegalParam.Bandwidth | [%s] | 實體專線頻寬值 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.Bandwidth | Invalid Bandwidth. | 實體專線頻寬值不合法。 | diagnosis |
| 400 | IllegalParam.Bandwidth | The param of %s is illegal. | 當前指定的Bandwidth非法，請參考API文件參數說明修改後重試。 | diagnosis |
| 400 | IllegalParam.BgpConfig | The specified BgpConfig is invalid. | 指定的BGP設定不合法。 | diagnosis |
| 400 | IllegalParam.BgpGroupLocalAsn | VBR BgpGroup localAsn must same with ECR asn. | 邊界路由器的LocalAsn必須與ECR的asn相同。 | diagnosis |
| 400 | IllegalParam.BgpGroupLocalAsn | Vbr bgp group local asn must same with ecr asn. | BGP組的阿里雲端側 BGP AS 號必須與 ECR的 AS號一致。 | diagnosis |
| 400 | IllegalParam.ChargeType | The param of %s is illegal. | 您輸入的ChargeType非法，請參考API文件參數說明修改後重試。 | diagnosis |
| 400 | IllegalParam.ChargeType | The parameter of ChargeType is illegal. | 參數ChargeType非法。 | diagnosis |
| 400 | IllegalParam.CidrBlock | The param of (%s) is illegal. | 網段不合法。 | diagnosis |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock is illegal. | CidrBlock參數非法。 | diagnosis |
| 400 | IllegalParam.CidrBlock | The param of cidrBlock is illegal. | cidrBlock參數非法。 | diagnosis |
| 400 | IllegalParam.CidrBlock | The param of CidrBlock [%s] is illegal. | CidrBlock非法。 | diagnosis |
| 400 | IllegalParam.CidrBlock | The specified CidrBlock (%s) is illegal. | CidrBlock參數不合法。 | diagnosis |
| 400 | IllegalParam.CidrBlockMask | The param of CidrBlock Mask [%s] is illegal. | CidrBlock遮罩非法。 | diagnosis |
| 400 | IllegalParam.CidrMask | The input CIDR mask is illegal. | 指定的網段遮罩不合法。 | diagnosis |
| 400 | IllegalParam.CidrName | The param of cidrName is illegal. | 輸入的cidrName非法。 | diagnosis |
| 400 | IllegalParam.ClientIpPool | The specified ClientIpPool (%s) is invalid. | 用戶端網段（%s）不合法。 | diagnosis |
| 400 | IllegalParam.ClientToken | Token verify failed because client token length too long. | ClientToken參數不合法。 | diagnosis |
| 400 | IllegalParam.CompanyLocalizedName | [%s] | 公司本地化名稱 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.CompanyLocalizedName | Invalid CompanyLocalizedName. | 公司本地化名稱不合法。 | diagnosis |
| 400 | IllegalParam.CompanyName | [%s] | 公司名稱 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.CompanyName | Invalid CompanyName. | 公司名稱不合法。 | diagnosis |
| 400 | IllegalParam.CrossBorderBandwidth | CrossBorder bandwidth error. | 跨域頻寬包不合法。 | diagnosis |
| 400 | IllegalParam.Day | The specified parameter day is illegal. | 指定的入參Day不合法。 | diagnosis |
| 400 | IllegalParam.Description | The param of Description [%s] is illegal. | 參數Description 不合法，請根據請求參數規定重新輸入。 | diagnosis |
| 400 | IllegalParam.Description | The parameter of Description is illegal. | 參數Description非法。 | diagnosis |
| 400 | IllegalParam.DestCidrBlock | The destCidrBlock is invalid. | 傳入的目標位址不合法。 | diagnosis |
| 400 | IllegalParam.DestinationCidrBlock | The param of DestinationCidrBlock is illegal. | 參數DestinationCidrBlock非法。 | diagnosis |
| 400 | IllegalParam.DestinationCidrIp | Param DestinationCidrIp illegal. | 非法參數：目的CIDR。 | diagnosis |
| 400 | IllegalParam.DetectMultiplier | The specified DetectMultiplier is not in proper range. | DetectMultiplier參數不在適當範圍內。 | diagnosis |
| 400 | IllegalParam.DhcpOptionsSetDescription | The specified DhcpOptionsSetDescription is invalid. | 指定的DhcpOptionsSetDescription參數不合法，請檢查該參數是否正確。 | diagnosis |
| 400 | IllegalParam.DhcpOptionsSetName | The specified DhcpOptionsSetName is invalid. | 指定的DhcpOptionsSetName參數不合法，請檢查該參數是否正確。 | diagnosis |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | 指定的DomainName參數不合法，請檢查該參數是否正確。 | diagnosis |
| 400 | IllegalParam.DomainName | The specified DomainName is invalid. | 指定的DomainName不合法。 | diagnosis |
| 400 | IllegalParam.DomainNameServers | The specified DomainNameServers is invalid. | 指定的DomainNameServers參數不合法，請檢查該參數是否正確。 | diagnosis |
| 400 | IllegalParam.EgressAclEntryId | The specified EgressAclEntryId is invalid. | 出方向ACL規則ID非法。 | diagnosis |
| 400 | IllegalParam.EnableBgp | VPN connection must enable BGP when VPN gateway has enabled BGP. | 當 VPN 閘道啟用 BGP 時，VPN 連線必須啟用 BGP。 | diagnosis |
| 400 | IllegalParam.EnableIpv6 | EnableIpv6 cannot be false when Ipv6CidrBlock is specified. | 指定Ipv6CidrBlock時EnableIpv6不能是False。 | diagnosis |
| 400 | IllegalParam.EnableIpv6 | The parameter of EnableIpv6 is illegal. | 參數EnableIpv6非法。 | diagnosis |
| 400 | IllegalParam.Filter.Key | The filter parameter Key is invalid. | 過濾參數Key不合法。 | diagnosis |
| 400 | IllegalParam.Filter.Value | The filter parameter Value is illegal. | 過濾參數Value不合法。 | diagnosis |
| 400 | IllegalParam.FilterKey.ResourceType | Filter parameters do not support entering only ResourceId or ResourceName without entering ResourceType. | 過濾參數不支援只輸入ResourceId或者ResourceName而不輸入ResourceType。 | diagnosis |
| 400 | IllegalParam.GatewayType | The param of %s is illegal. | 輸入的GatewayType非法。 | diagnosis |
| 400 | IllegalParam.HcSourceIp | The specified healthCheck Ip is not valid. | 健康檢查IP不合法。 | diagnosis |
| 400 | IllegalParam.HealthcheckIp | Healthcheck ip cannot equal with instance ip. | Healthcheck ip不能與執行個體ip相等。 | diagnosis |
| 400 | IllegalParam.IDaaSApplicationId | The specified IDaaS application Id is not illegal, the application instance needs to be created based on the dedicated SSL VPN template. | 指定的IDaaS應用執行個體ID不合法，應用執行個體需要基於專屬SSL VPN的範本建立。 | diagnosis |
| 400 | IllegalParam.IngressAclEntryId | The specified IngressAclEntryId is invalid. | 入方向ACL規則ID非法。 | diagnosis |
| 404 | IllegalParam.instanceId | The param of InstanceId is illegal. | VBR 倒換組執行個體參數是非法的。 | diagnosis |
| 400 | IllegalParam.InstanceType | The specified instance type is invalid. Only ECS instances and network interface are allowed. | 繫結的執行個體類型不允許。 | diagnosis |
| 400 | IllegalParam.InstanceType | The parameter of InstanceType is illegal. | 參數InstanceType非法。 | diagnosis |
| 400 | IllegalParam.InternetChargeType | The param of %s is illegal. | 您指定的InternetChargeType非法，請參考API文件參數說明修改後重試。 | diagnosis |
| 400 | IllegalParam.IpAddress | The specified IP address (%s) is illegal. | IP位址不合法。 | diagnosis |
| 400 | IllegalParam.IpAddress | The specified IpAddress (%s) is illegal. | IpAddress參數不合法。 | diagnosis |
| 400 | IllegalParam.IpAddress | The param of %s is illegal. | 指定的IP位址格式非法，請按API文件參數說明修改後再重試。 | diagnosis |
| 400 | IllegalParam.IpAddress | The specified IpAddress is illegal. | 指定的IpAddress不合法。 | diagnosis |
| 400 | IllegalParam.IpamPool | The specified IPAM pool cannot be empty. | IPAM Pool不可以為空。 | diagnosis |
| 400 | IllegalParam.Ipv4CidrMask | The specified Ipv4CidrMask is illegal. | 指定的Ipv4CidrMask不合法。 | diagnosis |
| 400 | IllegalParam.Ipv6Address | IllegalParam.Ipv6Address %s | Ipv6位址不合法。 | diagnosis |
| 400 | IllegalParam.Ipv6Address | The param of %s is illegal. | 您指定的ipv6位址非法，請檢查您的輸入是否正確。 | diagnosis |
| 400 | IllegalParam.Ipv6AddressId | IllegalParam.Ipv6AddressId %s | Ipv6執行個體Id不合法。 | diagnosis |
| 400 | IllegalParam.Ipv6Cidr | The specified Ipv6CidrBlock is invalid. | 指定的Ipv6CidrBlock非法。 | diagnosis |
| 400 | IllegalParam.Ipv6CidrBlock | The param of %s is illegal. | IPv6 網段不合法。 | diagnosis |
| 400 | IllegalParam.Ipv6CidrBlock | The parameter of Ipv6CidrBlock is illegal. | 參數Ipv6CidrBlock非法。 | diagnosis |
| 400 | IllegalParam.Ipv6CidrType | The parameter of IPv6CidrType is illegal. | 參數IPv6CidrType非法。 | diagnosis |
| 400 | IllegalParam.Ipv6Isp | The specified Ipv6Isp is illegal. | 指定的Ipv6Isp參數不合法。 | diagnosis |
| 400 | IllegalParam.Ipv6Prefix | The param of Ipv6Prefix is illegal. | 指定的入參Ipv6Prefix非法。 | diagnosis |
| 400 | IllegalParam.ipVersion | The IP version does not match. | ip version不匹配。 | diagnosis |
| 400 | IllegalParam.ipVersion | The param of ipVersion is illegal | 參數中的ip版本非法。 | diagnosis |
| 400 | IllegalParam.IpVersion | Param IpVersion illegal. | 非法參數：IpVersion。 | diagnosis |
| 400 | IllegalParam.IpVersion | The param of IPV6 is illegal. | 參數 IpVersion 異常，請核對參數後重試。 | diagnosis |
| 400 | IllegalParam.IpVersion | The parameter of IpVersion is illegal. | 參數IpVersion非法。 | diagnosis |
| 400 | IllegalParam.Isp | The param of %s is illegal. | 無法分配EIP，因為ISP參數非法。 | diagnosis |
| 400 | IllegalParam.Isp | The param of Isp [%s] is illegal. | 參數 Isp 不合法，請根據請求參數規定重新輸入。 | diagnosis |
| 400 | IllegalParam.JobDuration | The specified parameter JobDuration is illegal. | 輸入的任務時長不合法。 | diagnosis |
| 400 | IllegalParam.JobId | The specified parameter JobId is illegal. | 輸入的故障演練任務ID不合法。 | diagnosis |
| 400 | IllegalParam.JobType | The specified parameter JobType is illegal. | 輸入的任務類型不合法。 | diagnosis |
| 400 | IllegalParam.LeaseTime | LeaseTime [%s] is illegal. | 指定的LeaseTime參數不合法。 | diagnosis |
| 400 | IllegalParam.LineSPContactInfo | LineSPContactInfo is illegal. | 營運商線路維運聯繫方式不合法。 | diagnosis |
| 400 | IllegalParam.LineType | [%s] | 實體專線類型 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.LineType | Invalid LineType. | 實體專線類型不合法。 | diagnosis |
| 400 | IllegalParam.LocalAsn | The specified LocalAsn is invalid. | 本端自治系統號不合法。 | diagnosis |
| 400 | IllegalParam.LocalAsn | The param of LocalAsn is illegal | LocalAsn參數不合法。 | diagnosis |
| 400 | IllegalParam.LocalBgpIp | The specified LocalBgpIp is invalid. | 本端BGP位址不合法。 | diagnosis |
| 400 | IllegalParam.LocalGatewayIpAndMask | The LocalGatewayIpAndMask value is invalid. | 本端閘道IP和遮罩非法，請更正後重試。 | diagnosis |
| 400 | IllegalParam.LocalSubnet | The specified "LocalSubnet" (%s) is invalid. | 本端網段(%s)不合法。 | diagnosis |
| 400 | IllegalParam.LogProjectOrLogStore | The ProjectName and LogStoreName parameters are invalid and must be passed in at the same time or not passed at the same time. | ProjectName和LogStoreName 參數傳入非法，必須同時傳入或者同時不傳。 | diagnosis |
| 400 | IllegalParam.MaxResults | MaxResults is invalid. | MaxResults 參數不合法。 | diagnosis |
| 400 | IllegalParam.MinRxInterval | The specified MinRxInterval is not in proper range. | 指定的 MinRxInterval 不在適當的範圍內。 | diagnosis |
| 400 | IllegalParam.MinTxInterval | The specified MinTxInterval is not in proper range. | 指定的 MinTxInterval 不在適當的範圍內。 | diagnosis |
| 400 | IllegalParam.Mode | The specified value of the parameter Mode is invalid. | 參數Mode的值不合法。 | diagnosis |
| 400 | IllegalParam.Mode | The specified Mode is invalid. | 輸入參數 Mode 非法。 | diagnosis |
| 400 | IllegalParam.Mode | The parameter of Mode is illegal. | 參數 Mode 非法。 | diagnosis |
| 400 | IllegalParam.Name | The param of Name [%s] is illegal. | 參數 Name 不合法，請根據請求參數規定重新輸入。 | diagnosis |
| 400 | IllegalParam.NatIpPort | The param of NatIpPort is illegal. | NatIpPort 參數不合法。 | diagnosis |
| 400 | IllegalParam.NetworkInterfaceId | The param of NetworkInterfaceId is illegal. | NetworkInterfaceId 參數不合法。 | diagnosis |
| 400 | IllegalParam.NetworkType | The specified NetworkType (%s) is invalid. | 網路類型不合法。 | diagnosis |
| 400 | IllegalParam.NetworkType | IllegalParam.NetworkType %s | NetworkType 不合法。 | diagnosis |
| 400 | IllegalParam.NetworkType | The param of %s is illegal. | 您輸入的 NetworkType 非法，請檢查您的輸入是否正確。 | diagnosis |
| 400 | IllegalParam.NextToken | The specified NextToken is invalid. | 參數 NextToken 非法。 | diagnosis |
| 400 | IllegalParam.NextTokenExpired | The specified NextToken is invalid. | 參數 NextToken 非法。 | diagnosis |
| 400 | IllegalParam.NextTokenExpired | The parameter of NextTokenExpired is illegal. | 參數 NextTokenExpired 非法。 | diagnosis |
| 400 | IllegalParam.NoNameAuthentication | Aliyun account has not passed the real name authentication and do not meet the purchase conditions. | 您還未通過實名認證，不符合購買條件。請登入使用者中心進行實名認證。 | diagnosis |
| 400 | IllegalParam.OrderKey | The specified OrderKey is invalid. | 參數 OrderKey 非法。 | diagnosis |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | OrderMode 參數非法。 | diagnosis |
| 400 | IllegalParam.OrderMode | The param of OrderMode is illegal. | OrderMode 參數非法。 | diagnosis |
| 400 | IllegalParam.OrderType | The specified OrderType is invalid. | 參數 OrderType 非法。 | diagnosis |
| 400 | IllegalParam.OwnerAliUid | The specified AliUid is invalid. | 該使用者 ID 為非法參數。 | diagnosis |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | VbrOwnerId 參數非法。 | diagnosis |
| 400 | IllegalParam.OwnerAliUid | The param of VbrOwnerId is illegal. | 資源擁有者阿里使用者 ID 不合法。 | diagnosis |
| 400 | IllegalParam.PeerAsn | The param of PeerAsn is illegal | PeerAsn 參數不合法。 | diagnosis |
| 400 | IllegalParam.PeeringIpv6SubnetMask | The PeeringIpv6SubnetMask value is invalid. | 遮罩非法，請更正後重試。 | diagnosis |
| 400 | IllegalParam.peerIpAddress | The param of peerIpAddress is illegal | peerIpAddress 參數非法。 | diagnosis |
| 400 | IllegalParam.PeerIpAddress | The param of PeerIpAddress is illegal. | 對端 IP 位址非法。 | diagnosis |
| 400 | IllegalParam.PeerLocation | [%s] | 實體專線的地理位置 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.PeerLocation | Invalid PeerLocation. | 實體專線的地理位置不合法。 | diagnosis |
| 400 | IllegalParam.PmCertificateNo | The specified PmCertificateNo (%s) is illegal. | PmCertificateNo 參數不合法。 | diagnosis |
| 400 | IllegalParam.PmCertificateNo | [%s] | 施工工程師證件號碼 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.PmCertificateNo | Invalid PmCertificateNo. | 施工工程師證件號碼不合法。 | diagnosis |
| 400 | IllegalParam.PmCertificateType | [%s] | 施工工程師證件類型 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.PmCertificateType | Invalid PmCertificateType. | 施工工程師證件類型不合法。 | diagnosis |
| 400 | IllegalParam.PmContactInfo | [%s] | 施工工程師聯繫方式 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.PmContactInfo | Invalid PmContactInfo. | 施工工程師聯繫方式不合法。 | diagnosis |
| 400 | IllegalParam.PmGender | [%s] | 施工工程師性別 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.PmGender | Invalid PmGender. | 施工工程師性別不合法。 | diagnosis |
| 400 | IllegalParam.PmName | [%s] | 施工工程師姓名 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.PmName | Invalid PmName. | 施工工程師姓名不合法。 | diagnosis |
| 400 | IllegalParam.Policy | Param Policy illegal. | 非法參數：Policy。 | diagnosis |
| 400 | IllegalParam.PortRange | The specified port range is invalid. | 連接埠範圍參數不合法。 | diagnosis |
| 400 | IllegalParam.Priority | The specified Priority is invalid. | 優先順序參數不合法。 | diagnosis |
| 400 | IllegalParam.Priority | The specified Priority is illegal or the same as other mirroring sessions. | 指定的 Priority 不合法或與其他的映像工作階段相同。 | diagnosis |
| 400 | IllegalParam.PrivateIpAddress | The specified PrivateIpAddress is illegal. | 指定的 PrivateIpAddress 無效。請檢查參數約束，並在修改後重試。 | diagnosis |
| 400 | IllegalParam.ProductType | The specified ProductType is illegal. | 參數 ProductType 非法。 | diagnosis |
| 400 | IllegalParam.Protocol | The specified Protocol is invalid. | 協議參數不合法。 | diagnosis |
| 400 | IllegalParam.Protocol | Param Protocol illegal. | 非法參數：Protocol。 | diagnosis |
| 400 | IllegalParam.RegionId | The specified regionId is illegal. | regionId 不合法。 | diagnosis |
| 400 | IllegalParam.RemoteSubnet | The specified "RemoteSubnet" (%s) is invalid. | 對端網段（%s）不合法。 | diagnosis |
| 400 | IllegalParam.ReservedCidrMask | IllegalParam.ReservedCidrMask | 參數 ReservedCidrMask 不合法，請根據請求參數規定重新輸入。 | diagnosis |
| 400 | IllegalParam.ResourceGroupId | Invalid ResourceGroupld value. | 指定的資源群組非法或不存在。 | diagnosis |
| 400 | IllegalParam.ResourceId | The input parameter resource ID is invalid. | 輸入的參數資源 ID 不合法。 | diagnosis |
| 400 | IllegalParam.ResourceOwnerId | The param of resource owner ID is illegal. | 資源所屬使用者 ID 參數輸入非法。 | diagnosis |
| 400 | IllegalParam.ResourceType | Invalid Resource Type value. | 指定的 ResourceType 未支援或不合法。 | diagnosis |
| 400 | IllegalParam.ResourceType | Invalid %s value. | 傳入的參數 ResourceType 不合法。 | diagnosis |
| 400 | IllegalParam.Role | The specified Role is invalid. | Role 參數不合法。 | diagnosis |
| 400 | IllegalParam.RouteDest | The specified RouteDest is invalid | 目的地址不合法。 | diagnosis |
| 400 | IllegalParam.RouteEntryCidrDuplicate | The specified CIDR block already exists. | 存在重複的路由位址區塊。 | diagnosis |
| 400 | IllegalParam.RouteEntryName | The param of %s is illegal. | 指定路由名稱不合法。 | diagnosis |
| 400 | IllegalParam.RouteEntryType | The specified RouteEntryType is invalid. | 指定的路由條目類型不合規範。 | diagnosis |
| 400 | IllegalParam.RouteEntryType | The parameter of RouteEntryType is illegal. | 參數 RouteEntryType 非法。 | diagnosis |
| 400 | IllegalParam.RouteLimit | The operation is failed because of bgp group max route entry num quota exceed. | BGP 群組中的每個 BGP 鄰居可接收的路由條目數超過配額。 | diagnosis |
| 400 | IllegalParam.SecondaryCidrBlock | SecondaryCidrBlock is illegal. | 附加網段參數錯誤。 | diagnosis |
| 400 | IllegalParam.SecondaryCidrBlock | The parameter of SecondaryCidrBlock is illegal. | 參數 SecondaryCidrBlock 非法。 | diagnosis |
| 400 | IllegalParam.SecondaryCidrMask | The specified Secondary CIDR Mask is illegal. | 指定的 SecondaryCidrMask 不合法。 | diagnosis |
| 400 | IllegalParam.SecurityProtectionTypes | The param of securityProtectionTypes is illegal. | 傳入的 SecurityProtectionTypes 參數非法。 | diagnosis |
| 400 | IllegalParam.ServiceLocation | The param of serviceLocation is illegal. | ServiceLocation 參數非法。 | diagnosis |
| 400 | IllegalParam.ServiceProvider | The parameter of ServiceProvider is illegal. | 參數 ServiceProvider 非法。 | diagnosis |
| 400 | IllegalParam.SessionLogDeliveryDestination | The specified Delivery Destination is illegal. | 工作階段日誌投遞目標參數（SessionLogDeliveryDestination）設定格式無效。 | diagnosis |
| 400 | IllegalParam.SessionLogDeliveryType | The specified Delivery Type is illegal. | 工作階段日誌投遞目標類型參數 SessionLogDeliveryType 輸入不符合要求。 | diagnosis |
| 400 | IllegalParam.ShareType | The specified parameter ShareType is illegal. | 參數 ShareType 不合法。 | diagnosis |
| 400 | IllegalParam.Si | [%s] | 實體專線施工單位 [%s] 不合法。 | diagnosis |
| 400 | IllegalParam.Si | Invalid Si. | 實體專線施工單位不合法。 | diagnosis |
| 400 | IllegalParam.SourceCidrBlock | The param of SourceCidrBlock is illegal. | 參數 SourceCidrBlock 非法。 | diagnosis |
| 400 | IllegalParam.SourceCidrIp | Param SourceCidrIp is illegal. | 非法參數：來源 CIDR。 | diagnosis |
| 400 | IllegalParam.Spec | The parameter Spec is illegal. | Spec 不合法。 | diagnosis |
| 400 | IllegalParam.Spec | The param of Spec is illegal. | Spec 不合法。 | diagnosis |
| 400 | IllegalParam.Spec | The param of ExpectSpec is illegal | ExpectSpec 參數非法。 | diagnosis |
| 400 | IllegalParam.Spec | The spec is illegal. | spec 不合法。 | diagnosis |
| 400 | IllegalParam.Spec | The parameter of UserCidr is illegal. | 參數 Spec 非法。 | diagnosis |
| 400 | IllegalParam.TargetType | The parameter of TargetType is illegal. | 參數 TargetType 非法。 | diagnosis |
| 400 | IllegalParam.TrafficMirrorRuleId | The specified traffic mirror rule instance ID is invalid. | 流量鏡像篩選規則執行個體 ID 參數非法。 | diagnosis |
| 400 | IllegalParam.TrafficPath | The param of trafficPath is illegal. | 傳入的 trafficPath 參數非法。 | diagnosis |
| 400 | IllegalParam.TunnelCidr | The specified TunnelCidr is invalid. | 參數TunnelCidr不合法。 | diagnosis |
| 400 | IllegalParam.TunnelId | The specified TunnelId is invalid. | TunnelId參數非法。 | diagnosis |
| 400 | IllegalParam.Type | The parameter of Type is illegal. | 參數Type非法。 | diagnosis |
| 400 | IllegalParam.UnsupportedAccessPoint | The access point type does not support the creation of a highly reliable physical connection. | 接入點類型不支援建立高可靠實體專線。 | diagnosis |
| 400 | IllegalParam.UserCidr | UserCidr is not a valid or strict address. | UserCidr 不合法。 | diagnosis |
| 400 | IllegalParam.UserCidr | The parameter of UserCidr is illegal. | 參數UserCidr非法。 | diagnosis |
| 400 | IllegalParam.VlanId | The parameter VlanId is illegal. | VlanId參數非法。 | diagnosis |
| 400 | IllegalParam.VlanId | The param of VlanId is illegal. | VlanId不合法。 | diagnosis |
| 400 | IllegalParam.VlanId | vlan id has been used in physical connection | VlanId已經被使用。 | diagnosis |
| 400 | IllegalParam.VpcIpv6CidrBlock | The parameter of VpcIPv6CidrBlock is illegal. | 參數VpcIPv6CidrBlock非法。 | diagnosis |
| 400 | IllegalParam.VpconnAliUid | The specified VpconnAliUid is not illegal. | Vpconn的AliUid不合法。 | diagnosis |
| 400 | IllegalParam.VpconnAliUid | The specified AliUid of Vpconn is illegal. | Vpconn的AliUid參數不合法。 | diagnosis |
| 400 | IllegalParam.VRouterType | The VRouterType is not supported. | VRouterType不合法。 | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The param of VSwitchCidrReservationMask is illegal. | VSwitchCidrReservationMask 參數不合法，請參考API文件參數說明修改後重試。 | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask + 2. | 指定的 VSwitchCidrReservationMask 必須大於VSwitch的遮罩 + 2。 | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be greater than the VSwitch mask by 1. | 指定的 VSwitchCidrReservationMask 必須大於 VSwitch 的遮罩 + 1。 | diagnosis |
| 400 | IllegalParam.VSwitchCidrReservationMask | The specified VSwitchCidrReservationMask must be at least 2 bits greater than the vSwitch mask. | 指定的 VSwitchCidrReservationMask 至少比 VSwitch 的遮罩大 2。 | diagnosis |
| 400 | IllegalParam.Zone | The specified zone is invalid. | 參數Zone非法。 | diagnosis |
| 400 | IllegalParam.ZoneId | The parameter of ZoneId is illegal. | 參數ZoneId非法。 | diagnosis |
| 400 | IllegalParam.Zones | The values of Zones [%s] are invalid. | 參數Zones非法。 | diagnosis |
| 400 | IllegalParamException.LocalGatewayIpAndMask | The param of LocalGatewayIpAndMask is illegal. | 參數LocalGatewayIpAndMask無效。 | diagnosis |
| 400 | IllegalParamFormat | IllegalParamFormat | 參數格式不正確。 | diagnosis |
| 400 | IllegalParamFormat | The param of %s is illegal. | 指定的參數不合法。 | diagnosis |
| 400 | IllegalParamFormat.%s | The param format of %s is illegal. | 參數模式非法。 | diagnosis |
| 400 | IllegalParamFormat.Description | The specified description is invalid. | 描述參數格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified destination CIDR block is invalid. | 目的CIDR格式不正確。 | diagnosis |
| 400 | IllegalParamFormat.DstCidrBlock | The format of the specified dst CIDR block is invalid. | 目標CIDR參數格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.DstPortRange | The specified format of destination port range is invalid. | 目的連接埠範圍參數格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.Name | The specified Name is invalid. | 名稱參數格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.NatIp | The param format of %s[%s] is illegal. | NatIp的格式不正確。 | diagnosis |
| 400 | IllegalParamFormat.NatIpCidr | The param format of NatIpCidr is illegal. | 輸入參數NatIpCidr不合法。 | diagnosis |
| 400 | IllegalParamFormat.OutIp | The param format of OutIp is illegal. | OutIp參數格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.ReservedCidr | IllegalParamFormat.ReservedCidr | Cidr格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.SrcCidrBlock | The format of the specified source CIDR block is invalid. | 來源CIDR參數格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.SrcPortRange | The format of the specified source port range is invalid. | 來源連接埠範圍參數格式不合法。 | diagnosis |
| 400 | IllegalParamFormat.VSwitchCidrReservationCidr | The param format of VSwitchCidrReservationCidr is illegal. | VSwitchCidrReservationCidr參數格式非法。 | diagnosis |
| 400 | IllegalParamSize.AssociatedInstanceId | The param size of AssociatedInstanceId is illegal. | 參數AssociatedInstanceId長度非法。 | diagnosis |
| 400 | IllegalParamSize.EgressRules | The number of egress rules is invalid. | 出方向篩選規則數量不合法。 | diagnosis |
| 400 | IllegalParamSize.IngressRules | The specified number of ingress rules is invalid. | 入方向篩選規則的數量不合法。 | diagnosis |
| 400 | IllegalParamSize.Rules | The specified size of rules is invalid. | 流量鏡像篩選規則參數個數非法。 | diagnosis |
| 400 | IllegalParamSize.Zones | An invalid number of zones is specified. | Zones 陣列大小不合法。 | diagnosis |
| 400 | IllegealParam.NextHopType | The parameter NewNextHopType is illegal. | 路由條目下一跳類型不合法。 | diagnosis |
| IncorrcetRouteEntryStatus | Some route entry status blocked this operation. | 無法執行該操作，因為有些路由條目的狀態是 pending 或 modifying。 | diagnosis | |
| 400 | IncorrectBusinessStatus.FlowLog | The business status of flowLog is incorrect. | 目前業務狀態不支援建立流日誌執行個體。 | diagnosis |
| 400 | IncorrectBusinessStatus.PconnIdList | The business status of PconnIdList is incorrect. | 目前實體專線處於欠費狀態，不能進行此操作。 | diagnosis |
| 400 | IncorrectBusinessStatus.PublicIpAddressPool | The business status of publicIpAddressPool is incorrect. | 目前業務狀態不支援建立 IP 位址池執行個體。 | diagnosis |
| 400 | IncorrectBusinessStatus.ResourceId | The specified resource business status is invalid. | 輸入的資源處於欠費狀態。 | diagnosis |
| 400 | IncorrectBusinessStatus.TrafficMirror | The business status of traffic mirror is incorrect. | 流量鏡像的商業狀態不正確。 | diagnosis |
| 404 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | 該 VPC 已經開啟 ClassicLink。 | diagnosis |
| IncorrectEipStatus | Current elastic IP status does not support this operation | 指定的 EIP 狀態不支援此操作。 | diagnosis | |
| IncorrectEipStatus | Current elastic IP status does not support this operation. | 指定的 EIP 狀態不支援此操作。 | diagnosis | |
| IncorrectGlobalAccelerationInstanceIdStatus | Current GlobalAccelerationInstance status does not support this operation. | 指定的全球加速執行個體狀態不支援此操作。 | diagnosis | |
| IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is InUse. | Havip 執行個體為 Available 或 InUse 才允許操作。 | diagnosis | |
| 400 | IncorrectHaVipStatus | This operation is denied because satus of the specified HaVip is neither Available nor InUse. | 無法執行該操作，因為 HaVip 的狀態是 Available 或 InUse。 | diagnosis |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it’s status is Available or InUse. | 只有當 HaVip 的狀態是 Available 或 InUse 時，才可以執行該操作。 | diagnosis |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when its status is Available or InUse. | 只有當 HaVip 的狀態為可用或正在使用時，才能透過此操作操作 HaVip。 | diagnosis |
| 400 | IncorrectHaVipStatus | HaVip can be operated by this action only when it's status is Available or InUse. | Havip 執行個體為 Available 或 InUse 才允許操作。 | diagnosis |
| IncorrectInstanceStatus | The current status of instance does not support this operation. | 只有當 ECS 執行個體的狀態為執行中或者停止狀態時，才可執行該操作。 | diagnosis | |
| IncorrectInstanceStatus | The current status of the resource does not support this operation. | 只有當 ECS 執行個體的狀態為執行中或者停止狀態時，才可執行該操作。 | diagnosis | |
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it’s status is Running or Stopped. | 只有當 ECS 執行個體的狀態為執行中或者停止狀態時，才可執行該操作。 | diagnosis | |
| IncorrectInstanceStatus | Current instance status does not support this operation. | 只有當 ECS 執行個體的狀態為執行中或者停止狀態時，才可執行該操作。 | diagnosis | |
| IncorrectInstanceStatus | ECS instance can be operated by this action only when it's status is Running or Stopped. | 只有當 ECS 執行個體的狀態為執行中或者停止狀態時，才可執行該操作。 | diagnosis | |
| IncorrectOppositeInterfaceInfo | Cannot connect on the same router | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 指定的對端路由器介面資訊錯誤。 | diagnosis | |
| IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId is wrong. Maybe the RouterInterface or Router does not exist | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 指定的對端路由器介面資訊錯誤。 | diagnosis | |
| 400 | IncorrectOppositeInterfaceInfo | The peer router interface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is invalid. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 指定的對端路由器介面資訊錯誤。可能是 RouterInterface 或 Router 不存在，或者參數不匹配，或者 RouterInterface 不是連接接收方。 | diagnosis |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface information specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 指定的對端路由器介面資訊錯誤。 | diagnosis |
| 400 | IncorrectOppositeInterfaceInfo | The opposite RouterInterface specified by OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId is wrong. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 指定的對端路由器介面資訊錯誤。 | diagnosis |
| IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeRouterOwnerId must be all set. | 參數 OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 必須全部設定。 | diagnosis | |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId, OppositeRouterId, OppositeRouterType, and OppositeInterfaceOwnerId are all required. | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 必須全部設定。 | diagnosis |
| 400 | IncorrectOppositeInterfaceInfo.NotSet | OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId must be all set. | 參數 OppositeInterfaceId/OppositeRouterId/OppositeRouterType/OppositeInterfaceOwnerId 必須全部設定。 | diagnosis |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Active. | 僅當路由器介面處於「Active」狀態時，才可以使用該操作。 | diagnosis |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Idle. | 只有路由器介面處於「閒置」狀態時，才可以使用此操作。 | diagnosis |
| 400 | IncorrectRIStatus | RouterInterface can be operated by this action only when it's status is Inactive. | 只有當狀態為「非活動」時，才能透過此操作操作 RouterInterface。 | diagnosis |
| IncorrectRole.NotInitiatingSide | The specified RouterInterface is not InitiatingSide. | 該路由器介面不是發起端，請選擇發起端的路由器介面進行發起連接。 | diagnosis | |
| IncorrectRouteEntryStatus | Vpc NotStable route entry. | 無法執行該操作，當前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis | |
| IncorrectRouteEntryStatus | The vpc has NotStable routeEntry status. | 無法執行該操作，當前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis | |
| IncorrectRouteEntryStatus | VBR has NotStable route entry. | 無法執行該操作，當前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis | |
| IncorrectRouteEntryStatus | Specified routeEntry status error. | 無法執行該操作，當前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis | |
| IncorrectRouteEntryStatus | Some route entry status blocked this operation. | 無法執行該操作，當前路由表中有路由條目的狀態為 pending 或 modifying。 | diagnosis | |
| 404 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | 目前路由表的狀態不支援刪除操作。 | diagnosis |
| 400 | IncorrectRouteTableStatus.RouteEntryExist | You cannot delete the specified route table because it still has custom route entry. | 無法刪除指定的路由表，因為表中仍然存在使用者自訂路由條目。 | diagnosis |
| 400 | IncorrectRouteTableType | Route table can be deleted by this action only when it is type is custom. | 只有當路由表的類型為自訂時，才能透過此操作刪除路由表。 | diagnosis |
| IncorrectStatus | RouterInterface can be operated by this action only when the status is Active | 只有當狀態為「活動」、「空閒」或「非活動」時，才能透過此操作操作 RouterInterface。 | diagnosis | |
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Inactive. | 只有當狀態為「活動」、「空閒」或「非活動」時，才能透過此操作操作 RouterInterface。 | diagnosis | |
| IncorrectStatus | RouterInterface can be operated by this action only when it’s status is Idle. | 只有當狀態為「活動」、「空閒」或「非活動」時，才能透過此操作操作 RouterInterface。 | diagnosis | |
| IncorrectStatus | RouterInterface can be operated by this action only when it's status is Active. | 只有當狀態為「活動」、「空閒」或「非活動」時，才能透過此操作操作 RouterInterface。 | diagnosis | |
| 400 | IncorrectStatus | HaVip can be deleted only when it is status is Available. | 無法刪除HAVIP。只有當HAVIP的狀態為Available時才可用。 | diagnosis |
| IncorrectStatus | This openeration would be allowed only when status of this RouterInterface is Idle/Inactive. | 只有當狀態為「活動」、「空閒」或「非活動」時，才能透過此操作操作 RouterInterface。 | diagnosis | |
| IncorrectStatus | Vswtich status not stable. | 只有當狀態為「活動」、「空閒」或「非活動」時，才能透過此操作操作 RouterInterface。 | diagnosis | |
| 400 | IncorrectStatus | HaVip can be deleted only when status is Available or InUse. | 刪除HAVIP失敗，HAVIP的狀態不支援。 | diagnosis |
| 400 | IncorrectStatus | RouterInterface can be operated by this action only when the status is Active,idle or inactive. | 只有當狀態為「活動」、「空閒」或「非活動」時，才能透過此操作操作RouterInterface。 | diagnosis |
| 400 | IncorrectStatus.%s | %s [%s] status is invalid. | 指定執行個體的狀態無效。 | diagnosis |
| 400 | IncorrectStatus.BgpPeer | Invalid BgpPeer status cannot operate. | 無效的BgpPeer狀態無法運行。 | diagnosis |
| 400 | IncorrectStatus.BondRiConnection | The BondRi state is unstable. Check the instance state and try again. | BondRi 狀態在非穩態，請確認執行個體狀態後重試。 | diagnosis |
| 400 | IncorrectStatus.cbnStatus | Current CBN status does not support this operation. | CBN當前狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | 操作失敗，VPC在CEN中狀態未達穩態。 | diagnosis |
| 400 | IncorrectStatus.CenStatus | Cen status must not be middle status. | 請檢查cen 狀態。 | diagnosis |
| 400 | IncorrectStatus.CidrReservation | The status of the CIDR reservation is incorrect. | 當前預留網段狀態不支援該操作，請稍後重試。 | diagnosis |
| 400 | IncorrectStatus.DhcpOptionsSet | The DhcpOptionsSet status does not support this operation. | DHCP選項集執行個體處於中間狀態不允許操作，請等待執行個體狀態達到穩態後再操作。 | diagnosis |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the EgressOnlyRlue is incorrect. | 指定的EgressOnlyRule當前狀態不支援刪除。 | diagnosis |
| 400 | IncorrectStatus.EgressOnlyRule | The status of the specified IPv6EgressOnlyRule is incorrect. | 指定的IPv6EgressOnlyRule未處於穩態。 | diagnosis |
| 400 | IncorrectStatus.Eip | An EIP status error occurred. | eip狀態有誤。 | diagnosis |
| 400 | IncorrectStatus.EipAddress | The status of the EIP is incorrect. | EIP的狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.flowlog | Invalid flowlog status. | flowlog狀態無效，無法停止。 | diagnosis |
| 400 | IncorrectStatus.ForwardEntry | The status of %s [%s] is incorrect. | 要刪除的DNAT條目執行個體狀態不對。 | diagnosis |
| 400 | IncorrectStatus.FullNatEntry | The status of %s [%s] is incorrect. | FullNatEntry當前狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.GatewayRouteTable | The status of %s [%s] is incorrect. | 指定的閘道路由表執行個體處於非穩態，請稍後重試。 | diagnosis |
| 400 | IncorrectStatus.InstanceStatusInvalid | The specified Instance does not exist in our records. | 執行個體的狀態無效。 | diagnosis |
| 400 | IncorrectStatus.Ip | The status of ip is incorrect. | IP的狀態不正確。 | diagnosis |
| 500 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | Ipv4Gateway狀態處於非穩態。 | diagnosis |
| 400 | IncorrectStatus.Ipv4Gateway | The status of %s [%s] is incorrect. | 指定的Ipv4Gateway處於非穩態，請稍後重試。 | diagnosis |
| 400 | IncorrectStatus.Ipv6Address | The IPv6 address of the specified next hop is being assigned or deleted. | 指定的下一跳的IPv6位址此時正在被建立或刪除中。 | diagnosis |
| 400 | IncorrectStatus.Ipv6Gateway | The status of %s [%s] is incorrect. | 您指定的Ipv6Gateway處於非穩態，請稍後重試。 | diagnosis |
| 400 | IncorrectStatus.Ipv6Instance | The status of %s [%s] is incorrect. | 您指定的Ipv6Instance執行個體處於非穩態，請稍後重試。 | diagnosis |
| 400 | IncorrectStatus.Ipv6InternetBandwidth | The status of the IPv6InternetBandwidth is incorrect. | IPv6公網頻寬當前狀態不支援建立IPv6僅出規則。 | diagnosis |
| 400 | IncorrectStatus.NatGateway | The status of NAT gateway is incorrect. | NAT閘道狀態不對。 | diagnosis |
| 400 | IncorrectStatus.NatGateway | The status of natgateway is incorrect. | NAT閘道的狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.NatGateway | %The status of %s [%s] is incorrect. | nat閘道狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.NatGateway | The NatGateway instance is being deleted and needs to wait until the process is complete. | NAT閘道執行個體正在被刪除，無法重複刪除，需要等待刪除過程完成。 | diagnosis |
| 400 | IncorrectStatus.NatGateway | The status of the specified NatGateway is incorrect. | 指定的NatGateway未處於穩態。 | diagnosis |
| 400 | IncorrectStatus.NATGW | The status of the specified NAT gateway is abnormal. | NAT 閘道狀態異常。 | diagnosis |
| 400 | IncorrectStatus.NATGW | NATGW status is invalid. | NAT閘道的狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.NatIp | The status of %s [%s] is incorrect. | NatIp 目前狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | 彈性網路卡狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.NetworkInterface | The status of network interface is incorrect. | 目前網路卡狀態不支援該操作，請稍後重試。 | diagnosis |
| 400 | IncorrectStatus.NextHop | The status of %s [%s] is incorrect. | 指定的下一跳資源處於非穩態。 | diagnosis |
| 400 | IncorrectStatus.null | RouterInterface status is null. | RI 狀態為空。 | diagnosis |
| 400 | IncorrectStatus.OnlyForInit | Only the init status failover test job can be started. | 只有待演練的故障演練任務才可以修改或執行開始。 | diagnosis |
| 400 | IncorrectStatus.OnlyForInitOrStopped | Only failover test job in the status of init or stopped can be deleted. | 只有待演練或者已完成狀態的故障演練任務才能被刪除。 | diagnosis |
| 400 | IncorrectStatus.OnlyForTesting | Only the failover test job in the testing state can be stopped. | 只有演練中狀態的故障演練任務才可以被結束。 | diagnosis |
| 400 | IncorrectStatus.PconnIdList | The status of PconnIdList is incorrect. | 目前實體專線的狀態不正常，不能進行此操作。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in the Allocated state. | 實體專線狀態不對。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of PhysicalConnection is incorrect. | PhysicalConnection 狀態非法。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s is incorrect. | PhysicalConnection 狀態非法。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of [%s] is incorrect. | PhysicalConnection 狀態非法。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The specified PhysicalConnectionId is not in Allocated state. | 指定的 PhysicalConnectionId 沒有處於已分配狀態。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status (%s) does not support this operation. | 執行個體狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | [%s] | 實體專線 [%] 狀態不正常。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | Invalid physical connection status. | 實體專線狀態不正常。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnectionLOA | [%s] | 實體專線施工狀態 [%s] 不正常。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnectionLOA | Invalid Express Connect circuit LOA status. | 實體專線施工狀態不正常。 | diagnosis |
| 400 | IncorrectStatus.PrefixList | The status of prefixList is incorrect. | PrefixList 處於中間態，無法操作。 | diagnosis |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of %s [%s] is incorrect. | 無法分配 EIP，因為 IP 位址池狀態不對。 | diagnosis |
| 400 | IncorrectStatus.PublicIpAddressPool | The status of PublicIpAddressPool is incorrect. | 位址池執行個體未處於穩態，不允許分配 EIP。 | diagnosis |
| 400 | IncorrectStatus.Qos | The status of QoS is incorrect. | 目前 QoS 策略狀態異常，無法進行操作，請稍等後嘗試。 | diagnosis |
| 400 | IncorrectStatus.ResourceId | The specified resource status is invalid. | 輸入的資源 ID 對應的資源狀態不合法。 | diagnosis |
| 400 | IncorrectStatus.RouteEntry | The status of %s [%s] is incorrect. | 路由條目處於非穩態。 | diagnosis |
| 400 | IncorrectStatus.RouteEntryPublishStatus | Route entry publish status is incorrect. | 路由條目的路由發佈狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.RoutePropagationStatus | Route table propagation status not stable. Please wait and try again. | 路由表傳播狀態未進入穩態，請稍等後重試。 | diagnosis |
| 400 | IncorrectStatus.RouterEntry | The status of %s [%s] is incorrect. | RouterEntry 目前狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because status of this RouterInterface is not correct. | 目前執行個體的狀態無法進行刪除，請等待狀態變更後再次進行操作。 | diagnosis |
| 400 | IncorrectStatus.RouterInterface | This openeration would not be allowed because the status of this RouterInterface is not correct. | 目前執行個體的狀態無法進行刪除，請等待狀態變更後再次進行操作。 | diagnosis |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | 路由器介面狀態異常。 | diagnosis |
| 404 | IncorrectStatus.RouteTable | The status of the specified route table is incorrect. | 指定的路由表狀態不對。 | diagnosis |
| 400 | IncorrectStatus.RouteTable | The route table is in an invalid state. | 指定的路由表狀態不對。 | diagnosis |
| 400 | IncorrectStatus.RouteTableStatus | The status of the specified RouteTable is incorrect. | 指定的路由表未處於穩態。 | diagnosis |
| 400 | IncorrectStatus.SnatEntry | The Specified SnatEntry is not stable status, can not operation | The specified SNAT entries are not in a stable state and cannot be operated. | diagnosis |
| 400 | IncorrectStatus.SystemPrefixList | This is not allowed to operate system prefixList. | 無法操作系統 prefixList。 | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorFilter | The status of traffic mirror filter is incorrect. | 流量鏡像篩選條件的狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorRule | The status of traffic mirror rule is incorrect. | 流量鏡像篩選規則的狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorSession | The status of traffic mirror session is incorrect. | 流量鏡像工作階段狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.VBR | The status of VBR is incorrect. | VBR狀態非法。 | diagnosis |
| 400 | IncorrectStatus.VbrId | The status of %s is incorrect. | VBR執行個體狀態非法。 | diagnosis |
| 400 | IncorrectStatus.VirtualPhysicalConnection | The status of PhysicalConnection [%s] is incorrect. | 共享實體專線 [%s] 狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.Vpc | The status of %s [%s] is incorrect. | 目前執行個體狀態非穩態。 | diagnosis |
| 400 | IncorrectStatus.Vpc | Vpc status is invalid. | VPC未處於穩態。 | diagnosis |
| 400 | IncorrectStatus.Vpc | Vpc incorrect status. | VPC未處於穩態。 | diagnosis |
| 400 | IncorrectStatus.Vpc | The status of the specified VPC is incorrect. | 指定的VPC未處於穩態。 | diagnosis |
| 400 | IncorrectStatus.VpcDhcpOptionsSet | The dhcpOptionsSet status of VPC does not support this operation. | 目前VPC繫結的DHCP選項集狀態處於中間態不允許操作。 | diagnosis |
| 400 | IncorrectStatus.VpcDhcpStatus | The DhcpOptionsSet status of vpc does not support this operation. | 目前VPC中的DHCP選項集執行個體狀態不支援刪除VPC。 | diagnosis |
| 400 | IncorrectStatus.VpcDnsHostnameStatus | The DnsHostname status of vpc does not support this operation. | 目前VPC的私網網域名稱狀態不支援該操作。 | diagnosis |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | %s[%s]的狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.VpcRouteEntry | The status of the specified routeEntry is invalid. | VPC路由條目狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.VSWITCH | The status of the specified VSwitch is invalid. | 虛擬交換機狀態異常。 | diagnosis |
| 400 | IncorrectStatus.Vswitch | The status of %s [%s] is incorrect. | 指定的vSwitch處於非穩態。 | diagnosis |
| 400 | IncorrectStatus.VSwitch | The specified vSwitch status is invalid. | 虛擬交換機狀態異常。 | diagnosis |
| IncorrectVpcStatus | Current VPC status does not support this operation. | 當前 VPC 的狀態無法支援這個操作。 | diagnosis | |
| 404 | IncorrectVSwitchId | Specified vSwtich instance is not found during access authentication. | 權限校驗過程中，未找到指定的虛擬交換機（vSwitch）執行個體。 | diagnosis |
| IncorrectVSwitchStatus | VSwitch Creation simultaneously is not supported. | 該 vSwitch 處於 pending 狀態，無法刪除。 | diagnosis | |
| 400 | IncorrectVSwitchStatus | Some virtual switch is modifying within the same VPC. | 同一個VPC下存在多個「修改中」的虛擬交換機，請您稍後重試。 | diagnosis |
| 400 | IncorrectVSwitchStatus | The current virtual switch status does not support this operation. | 該vSwitch處於pending狀態，無法刪除。 | diagnosis |
| IncorretForwardEntryStatus | Some Forward entry status blocked this operation.. | 該 DNAT 條目不存在。 | diagnosis | |
| IncorretForwardEntryStatus | The Specified forwardEntry is not stable status | 該 DNAT 條目不存在。 | diagnosis | |
| IncorretForwardEntryStatus | The Specified forwardEntry is not exist | 該 DNAT 條目不存在。 | diagnosis | |
| IncorretRouteEntryStatus | 同一個 VPC 下面的路由表中的任一個路由條目/VSwitch 處在中間狀態（新增中/修改中/刪除中），不能建立路由條目。 | diagnosis | ||
| IncorretSnatEntryStatus | Some Snat entry status blocked this operation.. | 該 SNAT 條目狀態不穩定。 | diagnosis | |
| IncorretSnatEntryStatus | The Specified SnatEntry is not stable status | 該 SNAT 條目狀態不穩定。 | diagnosis | |
| IncorretVSwitchStatus | 部分 VSwitch 處於 pending 狀態，建立 VSwitch 失敗。 | diagnosis | ||
| 400 | InnerError | Internal system error. | 內部系統錯誤。 | diagnosis |
| 404 | Instance.NotExist | The instance not exist. | 執行個體不存在。 | diagnosis |
| 400 | INSTANCE.STATUS.NOT.ALLOW | Instance status not allow | 執行個體狀態不允許。 | diagnosis |
| 400 | Instance.StatusError | The status of instance error. | 執行個體狀態錯誤。 | diagnosis |
| 400 | InstanceExist.NatgwScheduledMigration | The scheduled migration information of the NAT gateway already exists. | NAT閘道預約遷移資訊已存在。 | diagnosis |
| 400 | InstanceNotExist.NatGatewayId | The NAT gateway instance is not exist. | NAT閘道執行個體不存在。 | diagnosis |
| 400 | InstanceNotExist.NATGWSchedule | The scheduled migration information of the NAT gateway does not exist. | NAT閘道預約遷移資訊不存在。 | diagnosis |
| 404 | InstanceNotExists | Instance not exists. | 要刪除的執行個體不存在。 | diagnosis |
| INSTANCE_HAS_INACTIVE_CHANGE | 變更正在處理中。 | diagnosis | ||
| InsufficientBalance | Your account does not have enough balance. | 帳戶餘額不足，請先儲值再操作。 | diagnosis | |
| InsufficientBalance.Eip | Your account does not have enough balance. | 帳戶餘額不足，請先儲值再操作。 | diagnosis | |
| InsufficientEipCapacity | Insufficient EIP capacity to fulfill your request. | EIP 配額不足。 | diagnosis | |
| INSUFFICIENT_BALANCE | 帳戶餘額不足。 | diagnosis | ||
| InternalError | The request processing has failed due to some unknown error | 內部系統錯誤。 | diagnosis | |
| 400 | InternalError | The request processing has failed due to some unknown error. | 請求處理由於某些未知錯誤失敗。 | diagnosis |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | 內部錯誤。 | diagnosis |
| 500 | InternalError | Internal system error. | 內部系統錯誤。 | diagnosis |
| 400 | INVAID.VBR.STATUS | VBR status must be active | VBR狀態無效。 | diagnosis |
| 400 | Invalid.Grant | Can not grant to other owner cen. | 無法將VBR跨帳號授權至其他CEN。 | diagnosis |
| Invalid.natgwNotExist | The specified natgateway not exist. | 該 NAT 閘道不存在。 | diagnosis | |
| 400 | Invalid.Status | The device or interface status invalid, or has been used.. | 參數Status無效。 | diagnosis |
| 400 | InvalidAccessKeyId.NotFound | Specified access key is not found. | 未找到指定的access key。 | diagnosis |
| InvalidAccessPoint.NotExist | The accessPoint not exit | 該接入點不存在。 | diagnosis | |
| InvalidAccessPoint.NotMatch | The accessPoint id is not matched | 該接入點 ID 不正確。 | diagnosis | |
| InvalidAccessPoint.ValueNotAllowed | The non-vbr router interface cannot have access point configured. | 非邊界路由器的路由器介面不能設定接入點。 | diagnosis | |
| InvalidAccessPoint.ValueNotAllowed | The non-vbr opposite router interface cannot have opposite access point configured. | 非邊界路由器的路由器介面不能設定接入點。 | diagnosis | |
| 400 | InvalidAccessPointId.NotEnabled | Invalid access point status. | 當前接入點暫無足夠資源可支援接入，請聯絡您的商務經理。 | diagnosis |
| InvalidAccessPointId.NotFound | The AccessPointId provided does not exist in our records. | 該 AccessPointId 不存在。 | diagnosis | |
| 400 | InvalidAccount.NotFound | The account is invalid. | 操作失敗，使用了無效的呼叫帳號。 | diagnosis |
| 400 | InvalidAction.Denied | Action is denied due to unfinished Eip configuration modification. | 由於未完成Eip配置修改，操作被拒絕。 | diagnosis |
| 400 | InvalidAliuid | Invalid Aliuid. | Aliuid無效。 | diagnosis |
| InvalidAllocationId.NotFound | Specified allocation id is not found. | 指定的公網 IP 不存在，請您檢查您填寫的參數是否正確。 | diagnosis | |
| InvalidAllocationId.NotFound | Specified allocation ID is not found.. | 指定的公網 IP 不存在，請您檢查您填寫的參數是否正確。 | diagnosis | |
| 404 | InvalidAllocationId.NotFound | Specified allocation ID is not found | 指定的公網IP不存在，請您檢查您填寫的參數是否正確。 | diagnosis |
| InvalidAssociation.Duplicated | Specified instance already is associated. | 該執行個體已繫結 EIP 或全球加速執行個體，不能再繫結，如需更換執行個體繫結的 EIP 或全球加速執行個體，請先解繫。 | diagnosis | |
| 400 | InvalidAttachment.NotFound | The attachment is not found. | Attachment不存在。 | diagnosis |
| 400 | InvalidAuthkey.Malformed | The specified BGP authentication key (%s) is malformed. | 該BGP認證密鑰不合法。 | diagnosis |
| 400 | InvalidAvailable.NoResource | No resource in the available zone. | 當前可用區內無可用資源。 | diagnosis |
| InvalidBackendServerId.NotFound | The specified BackendServerId is not found. | 後端伺服器執行個體不存在，請您檢查後端伺服器執行個體是否正確。 | diagnosis | |
| InvalidBackendServerId.NotInVPC | The specified BackendServerId is not in VPC. | 指定的 BackendServerId 不是 VPC 類型。 | diagnosis | |
| InvalidBackendServerRegionId.EqualRegionId | The specified BackendServerRegionId can not be the same as RegionId. | 指定的 BackendServerRegionId 不能與 RegionId 相同。 | diagnosis | |
| InvalidBackendServerRegionId.Mismatch | The specified BackendServerRegionId is not in the GlobalAccelerationInstance’s ServiceLocation. | 指定的 BackendServerRegionId 不在全球加速執行個體的服務區域中。 | diagnosis | |
| InvalidBackendServerRegionId.NotFound | The specified BackendServerRegionId is not found. | 指定的 BackendServerRegionId 不存在。 | diagnosis | |
| InvalidBackendServerType.NotFound | The specified BackendServerType is not supported. | 指定的後端伺服器類型不支援。 | diagnosis | |
| InvalidBandwidth | invalid physical connection banwidth. | 實體專線的頻寬不合法。 | diagnosis | |
| 400 | InvalidBandwidth.NotEnough | bandwdith not enough. | 頻寬包不足。 | diagnosis |
| 400 | InvalidBandwidth.NotEnough | Bandwidth not enough. | 頻寬計畫的頻寬不足。 | diagnosis |
| InvalidBandwidth.ValueNotSupported | The specified value of Bandwidth not supported. | 指定的頻寬峰值不支援。 | diagnosis | |
| 400 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackageId does not exist in our records. | 指定的頻寬包ID不存在。 | diagnosis |
| 404 | InvalidBandwidthPackageId.NotFound | The specified bandwidthPackage resourceId does not exist in our records. | 指定的共用頻寬包不存在。 | diagnosis |
| 400 | InvalidBandwidthPackageIdNumber.NotSupported | The number of BandwidthPackageIds exceeds the limit. | 共用頻寬包的數量超過Quota限制。 | diagnosis |
| InvalidBgpAuthkey.Malformed | Specified Bgp Group authkey is not valid. | 該 BGP 組的驗證密鑰不合法。 | diagnosis | |
| InvalidBgpDescription.Malformed | Specified Bgp Group description is not valid. | 該 BGP 組的描述不合法。 | diagnosis | |
| InvalidBgpDiscription.Malformed | Specified Bgp Group description is not valid. | 該 BGP 組的描述不合法。 | diagnosis | |
| InvalidBgpGroup | bgp group not exists | 該 BGP 組不存在。 | diagnosis | |
| 400 | InvalidBgpGroup.LocalAsn | VBR already attached to ECR, please delete it from ECR. | 邊界路由器已經綁定了專線閘道，不允許修改本端 AS，要修改請先解綁專線閘道。 | diagnosis |
| 400 | InvalidBgpGroup.LocalAsnInvalid | The specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025. | 指定的 BgpGroup LocalAsn 無效，僅支援 64512 到 65534 或 420000000 到 429496729。 | diagnosis |
| InvalidBgpName.Malformed | Specified Bgp Group name is not valid. | 該 BGP 組的名稱不合法。 | diagnosis | |
| InvalidBindingStatus | The eip binding status invalid. | EIP 綁定狀態不正確。 | diagnosis | |
| InvalidChargeType.ValueNotSupported | The specified ChargeType is not supported. | 該計費方式不支援，請您重新選擇計費方式。 | diagnosis | |
| 400 | InvalidCidrBlock | Specified CIDR block is not valid. | 可能的報錯原因： 1. 您不在 10.0.0.0/8 的路由網段的白名單中，不能使用該網段。 2. 新增的自訂路由目標網段不能從屬於同一個 VPC 下面所有交換器的網段。 3. 由於 100.64.0.0/10 是雲端服務位址，您不能再新增該網段指向雲下 IDC。 4. 除 100.64.0.0/10 以外，100.64.0.0/11、100.96.0.0/11 等明細路由網段均不能使用在雲下 IDC。 | diagnosis |
| InvalidCidrBlock | Specified CIDR block is already exists. | 該交換機網段與其他交換機的網段重疊或與已有的自訂路由的目標網段重疊，請使用其他未被佔用的網段。 | diagnosis | |
| InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | 該網段已經在該路由表中存在。 | diagnosis | |
| InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | 該 CIDR 格式不正確。 | diagnosis | |
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other subnets. | 該交換機網段與其他交換機的網段重疊或與已有的自訂路由的目標網段重疊，請使用其他未被佔用的網段。 | diagnosis | |
| InvalidCidrBlock.Overlapped | Specified CIDR block overlapped with other entry. | 該交換機網段與其他交換機的網段重疊或與已有的自訂路由的目標網段重疊，請使用其他未被佔用的網段。 | diagnosis | |
| InvalidCircuitCode.Malformed | The specified CircuitCode is not valid. | 該 CircuitCode 不合法。 | diagnosis | |
| InvalidCircuitCode.Malformed | circuitCode is illegal. | 該 CircuitCode 不合法。 | diagnosis | |
| 400 | InvalidCirdrBlock.MaskLength | Specified CIDR block is not valid . | 該 CIDR 網段格式不正確。 | diagnosis |
| 400 | InvalidClientIpPool.Conflict | The specified client IP pool conflicts with other resources in the same VPC. | 用戶端網段與 VPC 內其他資源衝突。 | diagnosis |
| 400 | InvalidCommodity.NotFound | Commodity is not exist. | Commodity 不存在。 | diagnosis |
| 404 | InvalidCustomerGatewayInstanceId.NotFound | The specified customer gateway instance id does not exist. | 指定的使用者閘道執行個體不存在，請您檢查使用者閘道執行個體 ID 是否正確。 | diagnosis |
| InvalidDescription | The description is not valid | 描述格式不合法。 | diagnosis | |
| 400 | InvalidDescription.Malformed | The Description is illeagl. | 指定的資源描述格式不合法。長度為 2～256 個字元，不能以 http:// 和 https:// 開頭。 | diagnosis |
| InvalidDescription.Malformed | The specifid ‘Description’ is not valid. | 描述的長度可以是 2 到 256 個字元，不能以 http:// 和 https:// 開頭。 | diagnosis | |
| InvalidDescription.Malformed | The specifid "Description" is not valid. | 描述的長度可以是 2 到 256 個字元，不能以 http:// 和 https:// 開頭。 | diagnosis | |
| 400 | InvalidDescription.Malformed | The specifid ?Description? is not valid. | 指定的資源描述格式不合法。長度為 2～256 個字元，不能以 http:// 和 https:// 開頭。 | diagnosis |
| 400 | InvalidDescription.Malformed | The Description is illegal. | 指定的資源描述格式不合法。長度為 2-256 個字元，不能以 http:// 和 https:// 開頭。 | diagnosis |
| 400 | InvalidDescription.Malformed | The specifid Description is not valid. | 參數 Description 值不合法。 | diagnosis |
| 400 | InvalidDescription.Malformed | The specified Description is wrongly formed. | 入參 Description 無效。 | diagnosis |
| 400 | InvalidDescription.Malformed | The specified Description is not valid. | 參數 Description 值不合法。 | diagnosis |
| 400 | InvalidDescription.Malformed | The specified "Description" is not valid. | 描述的長度可以是 2 到 256 個字元，不能以 http:// 和 https:// 開頭。 | diagnosis |
| 404 | InvalidDeviceName.NotFound | DeviceName is not found. | 指定的裝置不存在。 | diagnosis |
| 400 | InvalidDhcpOptionsSetId.NotFound | The specified dhcpOptionsSetId does not exist. | DHCP 選項集執行個體不存在，請檢查該參數是否正確。 | diagnosis |
| 400 | InvalidDomainNameServers.Malformed | The specified format of DomainNameServers is invalid. | 指定的 DomainNameServers 參數格式不正確，請檢查該參數是否正確。 | diagnosis |
| 400 | InvalidEIPStatus.BizDisabled | The EIP has been locked. | EIP 執行個體被鎖定。 | diagnosis |
| InvalidEndTime.Malformed | Specified end time is malformed. | 該結束時間不合法。 | diagnosis | |
| InvalidEndTime.Malformed | The specified parameter "EndTime" is not valid. | 該結束時間不合法。 | diagnosis | |
| 400 | InvalidEniType.SlaveEni | The eni type cannot be slave eni. | 網路卡類型不能是 Slave 網路卡。 | diagnosis |
| InvalidEntryRuleQuota.NotFound | Route entry quota rule not exists. | 路由條目配額規則不存在。 | diagnosis | |
| InvalidExternalIp.Malformed | The specified ExternalIp is not a valid IP address. | 該公網 IP 不合法。 | diagnosis | |
| InvalidExternalIp.NotFound | Specified External Ip address does not found on the VRouter | 該公網 IP 不存在。 | diagnosis | |
| InvalidExternalPort.Malformed | The specified ExternalPort is not a valid port. | 該公網連接埠不合法。 | diagnosis | |
| InvalidFilterKey.NotFound | 該篩選器的 Key 值不合法。 | diagnosis | ||
| 404 | InvalidFilterKey.ValueNotSupported | Specified filter key is not supported: Filter.X.key | 該篩選器的 Key 不支援：Filter.X.key。 | diagnosis |
| InvalidFilterValue | 該篩選器的 Value 值不合法。 | diagnosis | ||
| InvalidForwardEntryId.NotFound | Specified forward entry ID does not exist | 該 DNAT 條目不存在。 | diagnosis | |
| InvalidForwardTableId.NotFound | Specified forward table does not exist. | 指定的 DNAT 表不存在，請您檢查輸入參數是否正確。 | diagnosis | |
| InvalidForwardTableId.NotFound | Specified forwardTableId does not exist | 指定的 DNAT 表不存在，請您檢查輸入參數是否正確。 | diagnosis | |
| InvalidGlobalAccelerationInstanceDescription.Malformed | The specified Description is not valid. | 描述格式不正確。 | diagnosis | |
| InvalidGlobalAccelerationInstanceId.NotFound | The specified GlobalAccelerationInstanceId is not found. | 全球加速執行個體不存在。 | diagnosis | |
| InvalidGlobalAccelerationInstanceName.Malformed | The specified Name is not valid. | 名稱格式不正確。 | diagnosis | |
| InvalidHaVip.NotFound | The specified HaVip does not exist. | 該 HAVIP 不存在。 | diagnosis | |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified region. | 指定的 HaVip 不在指定的地域中，請您檢查選擇的地域是否正確。 | diagnosis |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified VPC. | 該 HaVip 在 VPC 中不存在。 | diagnosis |
| 400 | InvalidIAssociatedInstanceType.ValueNotSupported | The specified value of AssociatedInstanceType is not supported. | AssociatedInstanceType 的值不合法，請您檢查該參數是否正確。 | diagnosis |
| 404 | InvalidIDaaSApplicationId.NotFound | The specified IDaaS application Id does not exist. | 指定的 IDaaS 應用執行個體 ID 不存在。 | diagnosis |
| 404 | InvalidIDaaSInstanceId.NotFound | The specified IDaaS instance ID does not exist. | 指定的 IDaaS 執行個體 ID 不存在。 | diagnosis |
| InvalidIdempotenceParameter.Mismatch | The specified parameters are different from before. | 該 client token 和之前的不同。 | diagnosis | |
| 400 | InvalidInstance.NotBelong | The instance to be associated with does not belong to your account. | 繫結執行個體不屬於您的帳號。 | diagnosis |
| 400 | InvalidInstance.NotExist | The bound instance does not exist. | 繫結執行個體不存在。 | diagnosis |
| 404 | InvalidInstance.NotFound | The specified Instance does not exist in the specified region. | 指定的執行個體在當前地域不存在。 | diagnosis |
| InvalidInstance.StatusError | The router instance owener error. | 執行個體狀態錯誤。 | diagnosis | |
| 400 | InvalidInstance.StatusError | The router instance status error. | 執行個體狀態錯誤。 | diagnosis |
| 400 | InvalidInstanceId | vswitch does not exist. | vSwitch 執行個體不存在。 | diagnosis |
| 400 | InvalidInstanceId | Instance does not exist. | 執行個體不存在。 | diagnosis |
| 400 | InvalidInstanceId | VPC does not exists. | VPC 執行個體不存在。 | diagnosis |
| 400 | InvalidInstanceId | NetworkInterface does not exist. | 網路卡執行個體不存在。 | diagnosis |
| InvalidInstanceId.NotFound | The specified Instance does not exist in the specified region. | 指定的執行個體 ID 不存在。 | diagnosis | |
| InvalidInstanceId.NotFound | Specified instance does not exist. | 指定的執行個體 ID 不存在。 | diagnosis | |
| InvalidInstanceId.NotFound | The InstanceId provided does not exist in our records. | 指定的執行個體 ID 不存在。 | diagnosis | |
| 400 | InvalidInstanceId.NotFound | The InstanceId is not found. | 執行個體 InstanceId 找不到。 | diagnosis |
| 400 | InvalidInstanceId.NotFound | The InstanceId provided does not exist. | 該執行個體不存在。 | diagnosis |
| 400 | InvalidInstanceId.NotFound | InstanceId not found. | InstanceId 參數無效。 | diagnosis |
| 400 | InvalidInstanceId.NotFound | [%s] | 實體專線執行個體 [%s] 不存在。 | diagnosis |
| 400 | InvalidInstanceId.NotFound | InstanceId is not found. | 實體專線執行個體 ID 不存在。 | diagnosis |
| 400 | InvalidInstanceId.NotFound | The specified instance id does not exist. | 指定的執行個體 ID 不存在。 | diagnosis |
| 400 | InvalidInstanceIds.NotFound | The instanceIds are not found | 執行個體 ID 沒有找到。 | diagnosis |
| InvalidInstanceOwner.Error | The router instance owener error. | 執行個體 owner 錯誤。 | diagnosis | |
| 400 | InvalidInstanceOwner.Error | The router instance owner error. | 執行個體 owner 錯誤。 | diagnosis |
| 400 | InvalidInstanceType.NotFound | The instance type is not found | 執行個體類型沒有找到。 | diagnosis |
| InvalidInstanceType.ValueNotSupported | The specified value of InstanceType is not supported. | 參數 InstanceType 的值不合法。 | diagnosis | |
| InvalidInstanId.NotFound | Specified instance does not exist. | 指定的執行個體不存在，請您檢查該執行個體是否正確。 | diagnosis | |
| InvalidInternalIp.Malformed | The specified InternalIp is not a valid IP address. | 該目標私網 IP 不合法。 | diagnosis | |
| InvalidInternalPort.Malformed | The specified InternalPort is not a valid port. | 該私網連接埠不合法。 | diagnosis | |
| InvalidIp.Malformed | The specified ip address is not valid. | IP 格式不合法。 | diagnosis | |
| InvalidIP.Malformed | Ip malformed. | diagnosis | ||
| InvalidIp.NotInNatgw | The specified Ip not belong to natgateway. | 該 IP 位址不屬於該 NAT 閘道。 | diagnosis | |
| 400 | InvalidIp.NotSameSubnet | Local gateway ip and peer gateway ip are not in the same subnet. | 本地閘道 IP 位址與對端閘道 IP 位址不在同一個子網路內。 | diagnosis |
| 400 | InvalidIpAddress.AlreadyExist | Specified IpAddress is already exist. | 該 IP 位址已經存在。原因是同一個使用者在同一個地域內，IP 位址不可重複。 | diagnosis |
| 400 | InvalidIPAddress.AlreadyInUse | The specified IPAddress is already used by other resource. | 指定的 IP 位址已經被其他資源使用。 | diagnosis |
| InvalidIPAddress.AlreadyUsed | The specified IPAddress is already used by other resource. | 該 IP 已經被佔用。 | diagnosis | |
| 400 | InvalidIPAddress.Malformed | The specified IPAddress is not a valid or strict address. | 傳入的 IP 位址不合法。 | diagnosis |
| InvalidIPAddress.NotAvailable | The specified IPAddress is not available because it is a system reserved IPAddress. | 該 IP 不可用，該 IP 是系統預留 IP。 | diagnosis | |
| InvalidIPAddress.OutOfRange | The specified IPAddress is out of VSwitch CIDR. | 該私網 IP 不在交換器網段內。 | diagnosis | |
| 400 | InvalidIPAddress.OutOfVswCIDR | The specified IPAddress is out of VSwitch CIDR. | 指定的 IP 位址超出虛擬交換器（VSwitch）的 CIDR 段。 | diagnosis |
| InvalidIpAddress.WrongFormat | Specified IpAddress is invalid. | 該 IP 不合法。 | diagnosis | |
| InvalidIpCount.ValueNotSupported | The specified value of IpCount not supported. | 不能移除頻寬包裡所有的 IP 位址。 | diagnosis | |
| InvalidIpCount.ValueNotSupported | Can not remove all ips of the bandwidthPackage. | 不能移除頻寬包裡所有的 IP 位址。 | diagnosis | |
| InvalidIpInstanceId.NotFound | 指定的 eip 執行個體不存在。 | diagnosis | ||
| 400 | InvalidIpInstanceId.NotFound | The specified Eip InstanceId does not exist in our records. | 指定的 eip 執行個體不存在。 | diagnosis |
| 400 | InvalidIpv6AddressId.NotFound | The specified resource of %s is not found. | 指定的 Ipv6InstanceId 不存在，請確認您的輸入是否正確。 | diagnosis |
| 400 | InvalidIpv6CidrBlock.Malformed | Param Ipv6CidrBlock is malformed. | 參數 IPv6 網段不合法。 | diagnosis |
| 400 | InvalidIpv6CidrBlock.NotFound | The specified IPv6CidrBlock was not found. | 指定的 IPv6CidrBlock 未找到。 | diagnosis |
| 400 | InvalidIpv6Gateway.NotFound | The specified IPv6 gateway was not found. | 指定的 IPv6 閘道未找到。 | diagnosis |
| 400 | InvalidIpv6GatewayId.NotFound | The specified IPv6GatewayId was not found. | 指定的 IPv6GatewayId 未找到。 | diagnosis |
| 400 | InvalidIpv6Instance.NotFound | The specified resource of InvalidIpv6Instance is not found. | 未找到指定的 Ipv6Instance 資源。 | diagnosis |
| 404 | InvalidIpv6Instance.NotFound | The specified Ipv6AddressId or Ipv6InternetBandwidthId is not found. | 指定的 Ipv6AddressId 或 Ipv6InternetBandwidthId 不存在。 | diagnosis |
| 400 | InvalidIpv6Instance.NotFound | The specified IPv6Instance was not found. | 指定的 IPv6 執行個體未找到。 | diagnosis |
| 400 | InvalidIpv6ULACidrBlock.Malformed | The specified IPv6ULACidrBlock is malformed. | 指定的 IPv6ULACidrBlock 格式有誤。 | diagnosis |
| InvalidLineOperator.Malformd | The LineOperator provided was invalid. | 參數 LineOperator 的值不合法。 | diagnosis | |
| 400 | InvalidLoadBalancerId.NotFound | The specified resource of load balancer is not found. | 指定的 SLB 執行個體不存在。 | diagnosis |
| 400 | InvalidLoadBalancerId.NotFound | LoadBalancerId does not exist. | 負載平衡 ID 不存在。 | diagnosis |
| 400 | InvalidLocalBgpIp.Malformed | The specified LocalBgpIp is malformed. | 指定的本端 BGP 的 IP 異常。 | diagnosis |
| InvalidLocalGatewayIp.Malformed | The specified LocalGatewayIp is not valid. | 該本端閘道的 IP 不合法。 | diagnosis | |
| InvalidLockReason.NotFound | The specified LockReason is not found | 鎖定原因未找到。 | diagnosis | |
| InvalidName | The name is not valid | 該名稱格式不合法。 | diagnosis | |
| InvalidName.Malformd | The attribute name is illeagl. | 屬性名稱不合法。 | diagnosis | |
| 400 | InvalidName.Malformd | The attribute name is illegal. | 屬性名稱不合法。 | diagnosis |
| InvalidName.Malformed | The specified ‘Name’ is not valid. | 參數 Name 值不合法。 | diagnosis | |
| InvalidName.Malformed | The specified "Name" is not valid. | 參數 Name 值不合法。 | diagnosis | |
| InvalidName.Malformed | The specified ?Name? is not valid. | 參數 Name 值不合法。 | diagnosis | |
| 400 | InvalidName.Malformed | The attribute name is illegal. | 該名稱格式不合法。 | diagnosis |
| 400 | InvalidName.Malformed | The specified Name is not valid. | 參數 Name 值不合法。 | diagnosis |
| InvalidNatGatewayDescription.MalFormed | NatGateway description is not valid. | 閘道描述不合法。 | diagnosis | |
| InvalidNatGatewayId.NotFound | The NatGatewayId not exist. | 指定的 NatGatewayId 不存在，請您檢查填寫的 NatGatewayId 是否正確。 | diagnosis | |
| InvalidNatGatewayId.NotFound | The specified NatGatewayId does not exist in our records. | 指定的 NatGatewayId 不存在，請您檢查填寫的 NatGatewayId 是否正確。 | diagnosis | |
| InvalidNatGatewayName.MalFormed | NatGateway name is not valid. | 閘道名稱不合法。 | diagnosis | |
| 400 | InvalidNetworkAcl.NotFound | The special Network Acl is not found. | 未找到指定的網路 Acl。 | diagnosis |
| 400 | InvalidNetworkInterface.NotFound | The network interface is not found on the attachment. | Attachment 上的彈性網卡不存在。 | diagnosis |
| 400 | InvalidNetworkInterface.NotFound | The specified network interface does not exist. | 指定的網卡類型下一跳執行個體 ID 不存在。 | diagnosis |
| 400 | InvalidNetworkInterfaceId.NotFound | The network interface is not found. | 網卡不存在。 | diagnosis |
| InvalidNextHop | Specified nexthop and nexthop list cannot both null. | 該 NextHopId 不存在。 | diagnosis | |
| InvalidNexthop | The Specified nexthop illage. | diagnosis | ||
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | 直通 Eni 不能作為下一跳。 | diagnosis |
| InvalidNextHop.NotFound | Specified next hop does not exist. | 路由指定的下一跳不存在。 | diagnosis | |
| 400 | InvalidNextHop.NotFound | The specified NextHop does not exist. | 路由指定的下一跳不存在。 | diagnosis |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | 作為路由下一跳的網卡業務類型非法。 | diagnosis |
| 400 | InvalidNexthop.zhuhao | The specified nexthop is illegal. | 路由指向的下一跳不合法。 | diagnosis |
| InvalidNextHopId.NotFound | Specified next hop does not exist. | 該下一跳不存在。 | diagnosis | |
| 400 | InvalidNextHopList.Size | Has more than one nexthop. | 路由存在多個下一跳。 | diagnosis |
| 400 | InvalidNexthopListSize | nexthop size is illegal. Must be between 2 and 4. | 必須指定 2~4 個路由器介面作為下一跳。 | diagnosis |
| InvalidNextHopType | Specified parameter "NextHopType" is not valid | NextHopType 參數非法。 | diagnosis | |
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | NextHopType 參數非法。 | diagnosis |
| InvalidNexthopTypeAndList.BothNotNull | both nexthopType and nextHopList are not null. | 下一跳類型和下一跳列表不能同時為空。 | diagnosis | |
| InvalidNexthopTypeAndList.BothNull | both nexthopType and nextHopList are null. | 下一跳類型和下一跳列表都為空。 | diagnosis | |
| 400 | InvalidNicOrVm.NotFound | Bind nic or vm not exist. | 指定繫結的網卡或 VM 不存在。 | diagnosis |
| 400 | Invalidnull.NotFound | %s [%s] is not found. | 指定的資源執行個體不存在。 | diagnosis |
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state | 該 VirutalBorderRouter 狀態不合法，請檢查 VirutalBorderRouter 狀態。 [errors | diagnosis | |
| InvalidOperation.OperationNotAllowedInState | The specified VirutalBorderRouter is in invalid state. | 該 VirutalBorderRouter 狀態不合法，請檢查 VirutalBorderRouter 狀態。 [errors | diagnosis | |
| 400 | InvalidOperation.OrderOpened | You have already open the service. Go to the console to start using it. | 已經開通出雲端流量服務，去控制台使用它。 | diagnosis |
| InvalidOperation.RouterInterfaceNotDeleted | The specified VirutalBorderRouter still has routerInterface. | 該邊界路由器還有關聯的路由器介面。 | diagnosis | |
| 400 | InvalidOpposite.NotFound | The opposite does not exist. | 對端不存在。 | diagnosis |
| 400 | InvalidOpposite.NotFound | The opposite does not exit. | 對端不存在。 | diagnosis |
| InvalidOppositeRegionId.NotFound | The oppositeRegionId provided does not exist in our records. | 該對端地域不存在。 | diagnosis | |
| InvalidOppositeRouterType | nexthop list cannot only contain router interface whose opposite router interface is on vbr. | 下一跳的路由器介面的對端路由器類型必須為邊界路由器。 | diagnosis | |
| 400 | InvalidOppositeRouterType.ValueNotSupported | The specified OppositeRouterType is not valid. | 參數 OppositeRouterType 的值不合法。 | diagnosis |
| InvalidParam | The Ecmp routerEntry with router interfaces local vgw vip not match. | 修改路由的入參不合法。 | diagnosis | |
| 400 | InvalidParam | The routerEntry input param is illegal. | 修改路由的入參不合法。 | diagnosis |
| 400 | InvalidParam.AvailableZoneId | The specified AvailableZoneId did not retrieve the corresponding cluster IP address. | 您指定的 AvailableZoneId 沒有取得到對應的叢集 IP 位址。 | diagnosis |
| 400 | InvalidParam.CloudInstanceType | invalid cloud instance type | 無效的雲端服務類型。 | diagnosis |
| InvalidParam.ModifyRouterInterface | Modify routerinterface param invalide | 編輯路由器介面參數不合法。 | diagnosis | |
| 400 | InvalidParam.ModifyRouterInterface | Modify routerinterface param invalid | 編輯路由器介面參數不合法。 | diagnosis |
| InvalidParam.NotFound | Parameter must not be null | uid、bid、regionNo、remoteRegionNo和routerId等參數不能為空。 | diagnosis | |
| 400 | InvalidParam.NotFound | Parameter must not be null,uid, bid,regionNo, remoteRegionNo, routerId or accessPointId | 參數不能為null。 | diagnosis |
| 400 | InvalidParam.NotFound | Parameters such as uid, bid, regionNo, remoteRegionNo or routerId cannot be null. | uid、bid、regionNo、remoteRegionNo和routerId等參數不能為空。 | diagnosis |
| InvalidParam.NotNull | The parameter must not be null. | ForwardTableId 和 natGatewayId 不能同時為空。 | diagnosis | |
| 400 | InvalidParam.NotNull | SnatTableId and natGatewayId can not both be null | SnatTableId 和 natGatewayId 不能同時為空。 | diagnosis |
| 400 | InvalidParam.NotNull | FullnatTableId and natGatewayId can not both be null | FullnatTableId 和 natGateway不能同時為空。 | diagnosis |
| 400 | InvalidParam.NotNull | ForwardTableId and natGatewayId can not both be null | ForwardTableId 和 natGatewayId 不能同時為空。 | diagnosis |
| 400 | InvalidParameter | The parameter is invalid. | 參數不合法。 | diagnosis |
| InvalidParameter | Specified CIDR block is not valid | 該頻寬不合法。 | diagnosis | |
| InvalidParameter | Specified CIDR block is not valid in VPC. | 該頻寬不合法。 | diagnosis | |
| InvalidParameter | Specified value of "Bandwidth" is not supported. | 該頻寬不合法。 | diagnosis | |
| InvalidParameter | Specified UserCidr Subnet mask is not valid . | 該頻寬不合法。 | diagnosis | |
| InvalidParameter | Specified UserCidr invalid format. | 該頻寬不合法。 | diagnosis | |
| InvalidParameter | The specified parameter is not valid. | 該頻寬不合法。 | diagnosis | |
| InvalidParameter | Specified value of "Period" is not valid | 該頻寬不合法。 | diagnosis | |
| InvalidParameter | The specified parameter is not valid | 該頻寬不合法。 | diagnosis | |
| 400 | InvalidParameter | Specified value of InternetChargeType is not valid. | 參數InternetChargeType的值不合法。 | diagnosis |
| InvalidParameter | Specified value of "Bandwidth" is not valid. | 該頻寬不合法。 | diagnosis | |
| InvalidParameter.Bandwidth | 指定的頻寬無效。 | diagnosis | ||
| InvalidParameter.BandwidthPackage.n.ISP.ValueNotSupport | The specified ISP of BandwidthPackage is not valid. | 該共用頻寬包的ISP不合法。 | diagnosis | |
| 400 | InvalidParameter.BgpConfig | The specified BgpConfig is invalid. | 指定的BGP設定不合規範。 | diagnosis |
| InvalidParameter.Description.Malformed | The specified Description is not valid. | 該描述不合法。 | diagnosis | |
| 400 | InvalidParameter.EniInstanceId | The specified EniInstanceId is invalid. | 指定的EniInstanceId不合法。 | diagnosis |
| InvalidParameter.Mismatch | Specified elastic IP address and ECS instance are not in the same region. | 該EIP和ECS執行個體不在同一個地域內。 | diagnosis | |
| InvalidParameter.Name.Malformed | The specified Name is not valid. | 該名稱不合法，請您按照正確的格式書寫名稱。 | diagnosis | |
| 400 | InvalidParameter.RegionId | The EIP must be the same as the region of the bound instance. | EIP與繫結執行個體的region需一致。 | diagnosis |
| InvalidParameter.Spec.ValueNotSupported | The specified Spec is not valid. | 該規格不合法。 | diagnosis | |
| 400 | InvalidParameter.TagKey | The specified parameter TagKey is invalid. | 指定的參數TagKey不合規範。 | diagnosis |
| 400 | InvalidParameter.TagValue | The specified parameter TagValue is invalid. | 指定的參數TagValue不合規範。 | diagnosis |
| 400 | InvalidParameter.TooMany | monitor parameter too many data required. | 存在多個無效入參。 | diagnosis |
| 400 | InvalidParameter.VpnConnectionName | The specified vpn connection name is invalid. | 指定的VPN連線名稱不合規範。 | diagnosis |
| 400 | InvalidParams.AlreadyExists | bgp network already exists | BGP網路已經存在。 | diagnosis |
| InvalidParams.NotFound | instance not found | 該VPC不存在，請您檢查輸入的VPC是否正確。 | diagnosis | |
| 400 | InvalidParams.NotFound | vpc instance not found | 該VPC不存在，請您檢查輸入的VPC是否正確。 | diagnosis |
| InvalidParams.NotNull | parameter must not null. | 參數不能為空。 | diagnosis | |
| InvalidParams.NotNull | invalid peer asn cannot equals aliyun asn:45104 | 參數不能為空。 | diagnosis | |
| 400 | InvalidParams.NotNull | The parameter must not be null, name or description or icmpReplyEnabled | 名稱、描述以及icmp代答使能參數不能同時為空。 | diagnosis |
| 400 | InvalidParams.NotNull | params must not null. | 參數不能為空。 | diagnosis |
| InvalidParams.PeerIpAddressInUse | peer ip address in use | 對等IP位址正在使用，無法建立BGP對等。 | diagnosis | |
| 400 | InvalidParams.PeerIpAddressInUse | peer ip address in use ,cannot create bgp peer. | 對等IP位址正在使用，無法建立BGP對等。 | diagnosis |
| InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif | 請指出 PeerIpAddress。 | diagnosis | |
| 400 | InvalidParams.PeerIpAddressMustPointOut | vbr has 0 or more than 1 subif ,point out peerIpAddress. | 請指出 PeerIpAddress。 | diagnosis |
| InvalidPeerAsn.Malformed | invalid peer asn cannot equals aliyun asn:45104 | ASN號碼不能和阿里雲ASN號碼一致。 | diagnosis | |
| InvalidPeerGatewayIp.Malformed | The specified PeerGatewayIp is not valid. | 參數 PeerGatewayIp 的值不合法。 | diagnosis | |
| 400 | InvalidPeeringSubnetMask.Malformed | The specified PeeringSubnetMask is not valid. | 指定的 PeeringSubnetMask 不合法，請您檢查該參數是否正確。 | diagnosis |
| InvalidPeerIpAddress | multi pconn peer ip can not be null. | 多實體專線的 IP 位址不能為空。 | diagnosis | |
| InvalidPeerLocation.Malformd | The PeerLocation provided was invalid. | 參數 PeerLocation 的值不合法。 | diagnosis | |
| InvalidPeriod.ValueNotSupported | The specified parameter "Period" is not valid. | 參數Period的值不合法。 | diagnosis | |
| 400 | InvalidPhoneNum.Malformed | The parameter PhoneNum is invalid. | 參數 PhoneNum 不合法。 | diagnosis |
| 400 | InvalidPhysicalConnectionBandwidth.Malformed | Specified PhysicalConnection Bandwidth is not valid. | 專線綁定的頻寬值無效。 | diagnosis |
| InvalidPhysicalConnectionBusinessStatus | invalid physical connection business status. | 實體專線狀態不合法。 | diagnosis | |
| 400 | InvalidPhysicalConnectionChargeType.Malformed | Specified Physical Connection ChargeType is not valid. | InstanceChargeType 參數無效。 | diagnosis |
| InvalidPhysicalConnectionId.NotEnabled | The specified PhysicalConnectionId is not in Enabled state. | 該實體專線當前未處於正常狀態，請檢查實體專線後再建立。 | diagnosis | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId is not found. | 該實體專線 ID 不存在。 | diagnosis |
| InvalidPhysicalConnectionId.NotFound | The specified PhysicalConnectionId does not belong to user. | 無效的參數 PhysicalConnectionId。 | diagnosis | |
| InvalidPhysicalConnectionId.NotFound | The PhysicalConnectionId provided does not exist in our records. | 無效的參數 PhysicalConnectionId。 | diagnosis | |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found. | 沒有找到此專線 ID 對應的實體專線。 | diagnosis |
| 400 | InvalidPhysicalConnectionId.NotFound | The specified physicalConnection is not found | 無效的參數 PhysicalConnectionId。 | diagnosis |
| InvalidPhysicalConnectionId.NotMatched | instance id not matched. | 執行個體 ID 不匹配。 | diagnosis | |
| 400 | InvalidPhysicalConnectionOperator.Malformed | Specified PhysicalConnection Operator is not valid. | 專線的操作無效。 | diagnosis |
| 400 | InvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | Period 參數無效。 | diagnosis |
| 400 | InvalidPhysicalConnectionPortType.Malformed | Specified PhysicalConnection PortType is not valid. | 專線的連接埠類型無效。 | diagnosis |
| 400 | InvalidPolicy.WrongFormat | Invalid input policy format. | 輸入策略資訊格式錯誤。 | diagnosis |
| InvalidPortType.Malformd | The PortType provided was invalid. | 該連接埠類型不合法。 | diagnosis | |
| 400 | InvalidPortType.NotFound | Specified port type is not found. | 指定規格連接埠已無庫存。 | diagnosis |
| 404 | InvalidPortType.NotFound | There are no resources with the portType. | 沒有該連接埠類型。 | diagnosis |
| 400 | InvalidPrice.NotFound | Pricing plan result not found. | Price 參數無效。 | diagnosis |
| InvalidProtocal.ValueNotSupported | The specified IpProtocol does not support. | 該協定類型不支援。 | diagnosis | |
| InvalidRedundantPhysicalConnection | redundant physical connection doesn't belong to current user. | 該冗餘實體專線不屬於您的帳號。 | diagnosis | |
| InvalidRedundantPhysicalConnectionId.NotFound | The RedundantPhysicalConnectionId does not found. | 冗餘實體專線不存在。 | diagnosis | |
| InvalidRedundantPhysicalConnectionStatus | invalid redundant physical connection status. | 冗餘實體專線狀態不合法。 | diagnosis | |
| InvalidRegion.NotSupport | The specified region does not support. | 該 RegionId 不支援此操作。 | diagnosis | |
| InvalidRegionId.NotFound | The specified region not found. | 參數錯誤。 | diagnosis | |
| InvalidRegionId.NotFound | Specified value of "regionId" is not supported. | 參數錯誤。 | diagnosis | |
| 404 | InvalidRegionId.NotFound | The specified RegionId is not found. | 指定的 RegionId 不存在，請您檢查此產品在該地域是否可用。 | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist in our records. | 指定的 RegionId 不存在。 | diagnosis |
| InvalidRegionId.NotFound | The parameter wrong | 參數錯誤。 | diagnosis | |
| InvalidRegionId.NotFound | 參數錯誤。 | diagnosis | ||
| 404 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | 指定的 RegionId 不存在。請檢查該參數是否正確。 | diagnosis |
| 404 | InvalidRegionId.NotFound | The specified RegionId does not exist. | 指定的地域不存在。請檢查該參數是否正確。 | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified region is not found. | 指定地域不存在。 | diagnosis |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in ec region list. | 提供的regionId無效，請檢查。 | diagnosis |
| 404 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | 參數錯誤。 | diagnosis |
| 404 | InvalidRegionId.NotFound | The specified region is not found during access authentication. | 接入認證時未找到指定區域。 | diagnosis |
| 404 | InvalidRegionId.NotFound | The RegionId provided does not exist in our records. | 指定的RegionId不存在。 | diagnosis |
| InvalidRegionId.NotSupport | The RegionId provided does not support in our records. | 輸入的地域 ID 不正確。 | diagnosis | |
| InvalidRegionPair.NotReachable | The specified OppositeRegion is not reachable by ExpressConnect from that region specified by "RegionId" | 輸入的地域 ID 不正確。 | diagnosis | |
| invalidRemovedIpAddresses.NotFound | Some of the specified value of RemovedIpAddress not found in specified BandwidthPackage. | 要移除的IP中有不是NAT閘道的公網IP。 | diagnosis | |
| InvalidRemovedIpAddresses.NotFound | Some of remove ip is not natPublicIp. | diagnosis | ||
| 400 | InvalidReservationTime.Malformed | The parameter ReservationTime is invalid. | 參數ReservationTime不合法。 | diagnosis |
| 400 | InvalidResource.BindingExist | The binding instance has been binded. | 待繫結的執行個體已經處於繫結狀態了。 | diagnosis |
| 400 | InvalidResourceGroupId | The specified ResourceGroupId does not exist. | 資源群組ID不存在。 | diagnosis |
| 400 | InvalidResourceId.NotFound | This resourceId already has flowlog instance existed. | 要指定的資源已經存在flowlog執行個體。 | diagnosis |
| 404 | InvalidResourceId.NotFound | The specified ResourceId does not exist. | 指定的資源ID不存在。 | diagnosis |
| InvalidRole.ValueNotSupported | The specified Role is not valid. | 指定的 Role 不合法，請您檢查該參數是否正確。 | diagnosis | |
| InvalidRouteEntry | Specified routeEntry not exist. | 該路由條目不存在。 | diagnosis | |
| InvalidRouteEntry.Duplicate | The route entry already exist. | 指定的路由條目已存在。 | diagnosis | |
| InvalidRouteEntry.NotFound | Route entry not exists. | VPC 路由表項不存在。 | diagnosis | |
| 400 | InvalidRouteEntry.NotFound | The specified route entry does not exist. | 指定的路由條目不存在。 | diagnosis |
| 400 | InvalidRouteEntryId.NotFound | The specified routeEntry does not exist. | 指定的路由條目不存在。 | diagnosis |
| 400 | InvalidRouteEntryId.NotFound | Specified RouteEntryId does not exist. | 指定的路由條目未找到。 | diagnosis |
| 404 | InvalidRouteEntryId.NotFound | The specified resource of is not found. | 指定路由條目不存在。 | diagnosis |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | 無法修改，因為指定的路由條目名稱無效。 | diagnosis |
| 400 | InvalidRouteEntrySize | The Specified routerEntry size not legal. | 等價路由需要選擇2~4個路由器介面作為路由下一跳。 | diagnosis |
| 404 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | ri不能附加cen。 | diagnosis |
| InvalidRouterId.NotFound | The specified RouterId does not exist in our recored. | RouterId參數無效。 | diagnosis | |
| 400 | InvalidRouterId.NotFound | Param is not valid,this user does not have this router or aliuid bid regionNo and routerId must have something wrong. | RouterId參數無效。 | diagnosis |
| InvalidRouterInterface | invalid router interface. | 該路由器介面不存在。 | diagnosis | |
| InvalidRouterInterfaceChargeType.Malformed | The prepaid routerinterface can not delete. | 指定的RouterInterface ChargeType無效。 | diagnosis | |
| 400 | InvalidRouterInterfaceChargeType.Malformed | Specified RouterInterface ChargeType is not valid. | 指定的RouterInterface ChargeType無效。 | diagnosis |
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our records. | 指定的RouterInterface執行個體不存在。 | diagnosis | |
| InvalidRouterInterfaceId.NotFound | The specified RouterInterfaceId does not exist in our record. | 指定的RouterInterface執行個體不存在。 | diagnosis | |
| 400 | InvalidRouterInterfaceId.NotFound | The specified RouterInterface does not exist in our record. | 指定的RouterInterface執行個體不存在。 | diagnosis |
| 400 | InvalidRouterInterfaceSpec.Malformed | Specified RouterInterface spec is not valid. | 指定的RouterInterface Spec無效。 | diagnosis |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | VBR路由表中不存在指定的下一跳。 | diagnosis |
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid. | 該路由器類型不合法。 | diagnosis | |
| InvalidRouterType.ValueNotSupported | The specified RouterType is not valid | 該路由器類型不合法。 | diagnosis | |
| 400 | InvalidRouteTable.NotFound | The specified routetable does not exist. | 路由表執行個體不存在。 | diagnosis |
| 400 | InvalidRouteTable.NotFound | The specified RouteTable was not found. | 指定的路由表未找到。 | diagnosis |
| InvalidRouteTableId.NotFound | Specified route table does not exist. | 該路由表不存在。 | diagnosis | |
| 400 | InvalidSecondaryCidrBlock.NotFound | SecondaryCidrBlock [%s] is not found. | 無法找到要刪除的附加網段。 | diagnosis |
| 400 | InvalidSecondaryCidrBlock.NotFound | The specified SecondaryCidrBlock was not found. | 指定的附加網段未找到。 | diagnosis |
| InvalidServiceLocation.Mismatch | The specified ServiceLocation does not match the region. | 指定的服務區域與當前地域不匹配。 | diagnosis | |
| InvalidServiceLocation.ValueNotSupported | The specified ServiceLocation is not supported. | 指定的服務區域不支援。 | diagnosis | |
| InvalidSnatEntryId.NotFound | Specified SNAT entry does not exist. | 指定的 SNAT 條目不存在，請您檢查填寫的 SNAT 條目是否正確。 | diagnosis | |
| InvalidSnatEntryId.NotFound | Specified Snat entry ID does not exist | 指定的 SNAT 條目不存在，請您檢查填寫的 SNAT 條目是否正確。 | diagnosis | |
| InvalidSnatIp.Malformed | The specified SnatIp is not a valid IP address. | 該公網 IP 不合法。 | diagnosis | |
| InvalidSnatIp.NotFound | Specified SnatIp does not found on the NAT Gateway | 該公網 IP 不在 NAT 閘道中。 | diagnosis | |
| InvalidSnatTableId.NotFound | Specified SNAT table does not exist. | 指定的 SNAT 表不存在，請您檢查輸入參數是否正確。 | diagnosis | |
| InvalidSpec.ValudNotSupported | The specified Spec is not supported. | 該規格不支援該操作，請您更換規格後重試。 | diagnosis | |
| 400 | InvalidSpec.ValueNotSupported | The specified Spec is not supported. | 路由器介面規格無效。 | diagnosis |
| 400 | InvalidSslVpnServerCertId.NotFound | The parameter is incorrect. The corresponding SSL VPN server certificate cannot be found. | 參數不正確，未找到相應的 SSL VPN 服務端的憑證。 | diagnosis |
| InvalidStartTime.Malformed | The specified parameter "StartTime" is not valid. | 開始時間不合法。 | diagnosis | |
| InvalidStartTime.Malformed | Specified start time is malformed. | 開始時間不合法。 | diagnosis | |
| InvalidStartTime.TooEarly | The specified parameter "StartTime" is too early. | 開始時間不合法。 | diagnosis | |
| InvalidStatus | invalid physical connection status. | 只有當路由器介面的狀態為 Active、Idle 或 Inactive 時該操作才被允許。 | diagnosis | |
| 400 | InvalidStatus | RouterInterface can be operated by this action only when the status is Active,Idle or Inactive. | 只有當路由器介面的狀態為 Active、Idle 或 Inactive 時該操作才被允許。 | diagnosis |
| InvalidStatus.CannotOperate | invalid status cannot operate | 狀態不合法，無法執行該操作。 | diagnosis | |
| 400 | InvalidStatus.EcsStatusNotSupport | The special instance status Pending is not support operate | 執行個體處於掛起狀態下，不支援操作。 | diagnosis |
| 400 | InvalidStatus.EniStatusNotSupport | The status of the specified Eni does not support the operation. | 該 ENI 狀態不支援該操作。 | diagnosis |
| 400 | InvalidStatus.NatGateway | nat gateway status is incorrect. | NAT 閘道狀態不正確。 | diagnosis |
| 400 | InvalidStatus.NotAllow | Bind instance status invalid | 繫結執行個體狀態無效。 | diagnosis |
| InvalidStatus.NotAllowed | The virtual border has been associated by physicalConnection. | 當前邊界路由器的狀態不支援該操作。 | diagnosis | |
| InvalidStatus.NotAllowed | Invalid virtual border router status. | 當前邊界路由器的狀態不支援該操作。 | diagnosis | |
| 400 | InvalidStatus.SnatOrDnat | Operation failed because snat or dnat in unstable status. | 解繫 EIP 操作失敗，因為 SNAT 或 DNAT 處於非穩定狀態。 | diagnosis |
| InvalidStatus.StatusNotEnabled | The physical connection status is invalid. | 實體專線狀態不支援此操作，請檢查實體專線狀態。 | diagnosis | |
| 400 | InvalidStatus.vbrAttatchToEcr | Invalid virtual border router ecr status. | VBR 與 ECR 存在繫結關係，請先解除繫結。 | diagnosis |
| 400 | InvalidTagKey | The tag keys are not valid. | 無效的標籤索引。 | diagnosis |
| 400 | InvalidTagKey.Malformed | The specified tag key is invalid. | 無效的標籤鍵值，請指定有效的標籤鍵值後重試。 | diagnosis |
| 400 | InvalidTagScope.NotFound | The tag scope is not found | 無效的資源範圍。 | diagnosis |
| 400 | InvalidTagValue | The tag values are not valid. | 無效的標籤值。 | diagnosis |
| 400 | InvalidTransitRouterMode.NeedUpgrade | TransitRouter need to upgrade. | 當前 TransitRouter 不支援該操作，請升級 TransitRouter 後重試。 | diagnosis |
| 400 | InvalidTunnelCidr.Malformed | The specified TunnelCidr is malformed. | 指定的隧道 CIDR 異常。 | diagnosis |
| InvalidType.Malformd | The Type provided was invalid. | 參數 Type 的值不合法。 | diagnosis | |
| InvalidUserCidr.Malformed | Specified UserCird status is wrong | 該 UserCidr 和 100.64.0.0/10 重疊。 | diagnosis | |
| 400 | InvalidUserCidr.Malformed | Specified UserCidr overlapping in of 100.64.0.0/10. | 該 UserCidr 和 100.64.0.0/10 重疊。 | diagnosis |
| InvalidUserCidr.Quota | Specified UserCidr number is greater than 3. | 指定傳入的使用者網段參數數量達到配額限制。 | diagnosis | |
| 400 | InvalidUserCidr.Quota | The number of user CIDR blocks that you specify has reached the quota limit. | 指定傳入的使用者網段參數數量達到配額限制。 | diagnosis |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter is not found. | 該邊界路由器不存在，請您檢查輸入的邊界路由器是否正確。 | diagnosis | |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter or PhysicalConnection does not exist in our records. | 該邊界路由器不存在，請您檢查輸入的邊界路由器是否正確。 | diagnosis | |
| InvalidVbrId.NotFound | The specified VirutalBorderRouter does not exist in our records. | 該邊界路由器不存在，請您檢查輸入的邊界路由器是否正確。 | diagnosis | |
| InvalidVbrNetwork | vbr netowrk not exists | 該邊界路由器不存在，請您檢查輸入的邊界路由器是否正確。 | diagnosis | |
| InvalidVbrOwnerId.NotFound | The specified VbrOwnerId is not valid. | 參數 VbrOwnerId 的值不合法。 | diagnosis | |
| InvalidVBRStatus | invalid virtual border router status. | 邊界路由器狀態不合法。 | diagnosis | |
| InvalidVlanId.Malformed | The specified VlanId is not valid. | 參數 VlanId 的值不合法。 | diagnosis | |
| InvalidVlanId.Used | The specified VlanId has been used. | 該 VLAN 已經被佔用。 | diagnosis | |
| InvalidVPC.NotFound | vpc not exists. | 指定的 VPC 執行個體未找到。 | diagnosis | |
| 400 | InvalidVpc.NotFound | The specified VPC is not found. | 指定 vpc 不存在。 | diagnosis |
| 400 | InvalidVpc.NotFound | The specified VPC was not found. | 指定的 VPC 執行個體未找到。 | diagnosis |
| InvalidVpcDiscription.Malformed | Specified VPC description is not valid. | 該 VPC 描述的格式不符合要求。 | diagnosis | |
| 404 | InvalidVpcId.NotFound | Specified value of VpcId is not found in our record. | 該VPC不存在，請您檢查輸入的VPC是否正確。 | diagnosis |
| InvalidVpcId.NotFound | Specified VPC does not exist. | 指定的 VPC 執行個體未找到。 | diagnosis | |
| 400 | InvalidVpcId.NotFound | %s [%s] is not found. | 指定的 VpcId 執行個體不存在。 | diagnosis |
| 400 | InvalidVpcId.NotFound | The specified VPC was not found. | 指定的 VPC 執行個體未找到。 | diagnosis |
| 400 | InvalidVpcIdNumber.NotSupported | The number of vpcIds exceeds the limit. | vpcId 數量超出限制。 | diagnosis |
| InvalidVpcName.Malformed | Specified VPC name is not valid. | 專有網路 VPC 名稱格式不正確，請您修正 VPC 的格式後再重試。 | diagnosis | |
| InvalidVPCStatus | vpc incorrect status. | 該 VPC 狀態非法，請您檢查 VPC 狀態是否輸入正確。 | diagnosis | |
| InvalidVpnConnection.AlreadyExists | Vpn connection already exists. | VPN 連線已經存在，不用再次新增。 | diagnosis | |
| 404 | InvalidVpnConnectionInstanceId.NotFound | The specified vpn connection instance id does not exist. | 指定的 VPN 連線不存在，請您檢查該 VPN 連線 ID 是否正確。 | diagnosis |
| 400 | InvalidVpnGatewayInstanceId.NotFound | The specified vpn gateway instance id does not exist. | 指定的 VPN 閘道不存在，請您檢查 VPN 閘道是否正確。 | diagnosis |
| 400 | InvalidVpnInstanceId.NotFound | The specified VPN was not found. | 指定的 VPN 執行個體未找到。 | diagnosis |
| 404 | InvalidVpnInternetIp.NotFound | The specified VPN IP does not exist. | VPN 閘道 IP 不存在。 | diagnosis |
| 400 | InvalidVpnRouteEntry.NotFound | The specified route entry does not exist. | 指定的路由條目不存在。 | diagnosis |
| InvalidVRouter.NotFound | vRouter not exists. | 路由器不存在，請您檢查輸入的路由器是否正確。 | diagnosis | |
| 400 | InvalidVRouterDescription.Malformed | Specified virtual router description is not valid. | 輸入非法的路由器描述資訊。 | diagnosis |
| InvalidVRouterDiscription.Malformed | Specified virtual router description is not valid. | 該路由器描述資訊格式不正確。 | diagnosis | |
| InvalidVRouterId.NotFound | Specified virtual router does not exist. | 該路由器不存在，請您檢查輸入的路由器是否正確。 | diagnosis | |
| InvalidVRouterName.Malformed | Specified virtual router name is not valid. | 該路由器名稱格式不正確。 | diagnosis | |
| 400 | InvalidVSwitch.NotFound | The specified vSwitch is not found. | 指定的 vswitch 不存在。 | diagnosis |
| InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | 該 vSwitch 描述資訊格式不正確。 | diagnosis | |
| 400 | InvalidVSwitchDiscription.Malformed | Specified virtual switch description is not valid. | 該 vSwitch 描述資訊格式不正確。 | diagnosis |
| 400 | InvalidVSwitchId.FirstVswitchIpNotEnough | The ip of vswitch1 not enough. | 主 vSwitch 中可用 IP 數量不足。 | diagnosis |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The available zone of vswitch1 not supported. | 主 vSwitch 所在可用區不支援。 | diagnosis |
| 400 | InvalidVSwitchId.FirstVswitchNotSupport | The zone of vSwitch does not support creating a ha-tunnel VPN. | 虛擬交換機所在可用區不支援建立雙隧道 VPN，請更換虛擬交換機。 | diagnosis |
| InvalidVSwitchId.NotFound | The specified virtual switch does not exists. | 該交換機在該地域內不存在。 | diagnosis | |
| InvalidVSwitchId.NotFound | The specified virtual switch not found. | 該交換機在該地域內不存在。 | diagnosis | |
| InvalidVSwitchId.NotFound | VSwitch not exist. | 該交換機在該地域內不存在。 | diagnosis | |
| InvalidVSwitchId.NotFound | The specified VSwitch does not exist in the specified region. | 該交換機在該地域內不存在。 | diagnosis | |
| 400 | InvalidVSwitchId.SecondVswitchIpNotEnough | The ip of vswitch2 not enough. | 備 vSwitch 中的可用 IP 不足。 | diagnosis |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The available zone of vswitch2 not supported. | 備 vSwitch 所在可用區不支援。 | diagnosis |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | when creating a vpn gateway for this region, you cannot enter the second vswitch id. | 該地域建立 VPN 閘道時，不允許傳入第二個 vswitch id。 | diagnosis |
| 400 | InvalidVSwitchId.VswitchIdShouldDifferent | The VSwitch ids should be different. | 主備可用區不能相同。 | diagnosis |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | Two vSwitches should belong to different Availability Zones. | 建立雙隧道 VPN 時指定的兩個虛擬交換機必須要屬於不同可用區。 | diagnosis |
| 400 | InvalidVSwitchId.ZoneIdShouldDifferent | the available zone of vswitch1 and vswitch2 should be different. | 建立雙隧道 VPN 時入參的兩個可用區應該不同。 | diagnosis |
| 400 | InvalidVSwitchName.Malformed | Specified virtual switch name is not valid. | 該 vSwitch 名稱格式不正確，請您確認 vSwitch 名稱格式。 | diagnosis |
| 400 | InvalidZoneId.DisasterZoneNotSupport | the disaster available zone not support. | 雙隧道容災的可用區暫不支援使用。 | diagnosis |
| 400 | InvalidZoneId.FirstZoneNotSupport | the first available zone not support. | 入參的第一個可用區不可用。 | diagnosis |
| InvalidZoneId.NotFound | Specified value of ZoneId is not exists. | 該 IP 的可用區不正確。 | diagnosis | |
| InvalidZoneId.NotFound | Specified zone does not exist. | 該 IP 的可用區不正確。 | diagnosis | |
| InvalidZoneId.NotFound | Can not find ZoneId for allocated ip. | 該 IP 的可用區不正確。 | diagnosis | |
| INVALID_COMPONENT | 此執行個體類型不可用於該帳戶。 | diagnosis | ||
| INVALID_PARAMETER | The parameter invalid. | 參數不合法。 | diagnosis | |
| 400 | INVALID_VPC_ID | The Specified VpcId not match. | 該VPC不存在，請您檢查輸入的VPC是否正確。 | diagnosis |
| INVALID_WEIGHT_PARAM | Specified value of weight invalid | 該權重不合法。 | diagnosis | |
| 400 | InvokeError | instance quota rule invoke error. | 取得規則資料失敗，請稍後再試。 | diagnosis |
| 400 | Ip.Allocated | The reserve ip has been allocated. | 已分配保留 IP。 | diagnosis |
| 400 | IpConflict | Client IP pool conflict with other SSL VPN server in the same VPC. | 用戶端 IP 池與同一 VPC 中的其他 SSL VPN 伺服器衝突。 | diagnosis |
| 400 | IpConflict | Client IP pool conflict with local IP range. | 用戶端 IP 池與本地 IP 範圍衝突。 | diagnosis |
| IpInstanceId.AlreadyInBandwidthPackage | 共用頻寬包中已有此彈性公網 IP 執行個體。 | diagnosis | ||
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId is already added to the bandwidth package. | 該 EIP 執行個體已經加入頻寬包。 | diagnosis |
| 400 | IpInstanceId.AlreadyInBandwidthPackage | The specified Eip InstanceId already in bandwidthPackage. | 共用頻寬包中已有此彈性公網 IP 執行個體。 | diagnosis |
| 400 | IpInstanceId.AlreadyOutsideBandwidthPackage | The eip instance is already outside bandwidth package. | 該 EIP 執行個體已經不在頻寬包內。 | diagnosis |
| IpInstanceId.BizStatusInvalid | 指定的 EIP 商業狀態不正確。 | diagnosis | ||
| 400 | IpInstanceId.BizStatusInvalid | The specified EIP BizStatus is incorrect. | 指定的 EIP 商業狀態不正確。 | diagnosis |
| IpInstanceId.ChargeType.NotSupport | 預付費的 EIP 執行個體不能加到頻寬包。 | diagnosis | ||
| 400 | IpInstanceId.ChargeType.NotSupport | You cannot add subscription EIP instance to the bandwidth package. | 預付費的 EIP 執行個體不能加到頻寬包。 | diagnosis |
| 400 | IpInstanceId.InvalidIpInternetChargeType | You cannot add the hybrid cloud EIP to a pay by traffic bandwidth package. | 混合雲端模式的 EIP 不允許新增到按流量計費的頻寬包。 | diagnosis |
| IpInstanceId.NotBandwidthPackage | 共用頻寬包中沒有此彈性公網 IP 執行個體。 | diagnosis | ||
| IpInstanceId.QuotaExceeded | 該頻寬包可新增 EIP 個數已經達到上限。 | diagnosis | ||
| 400 | IpInstanceId.QuotaExceeded | The maximum number of EIP that you can add to the bandwidth package is exceeded. | 該頻寬包可新增 EIP 個數已經達到上限。 | diagnosis |
| LastTokenProcessing | The last token request is processing. | 正在處理上一條權杖請求，請您稍後再試。 | diagnosis | |
| LimitationExceed.InterfaceNumberOnRouter | Total number of RouterInterfaces on a Router exceeded. | 路由器介面數量已達到配額上限。 | diagnosis | |
| LinkRole.NotSupport | This linkrole is not supported | 這個連結不支援。 | diagnosis | |
| 404 | MaintenanceEvent.EventNotExist | Maintenance event is not exist. | 維運事件不存在。 | diagnosis |
| 400 | MaintenanceEvent.ExecuteTimeShouldBeforeLatestTime | The specified execution time of event must be before the latest execution time. | 指定的維運事件執行時間要在最遲執行時間之前。 | diagnosis |
| MCMS_VBR_EMPTY | Specified region have no vbr. | 該地域沒有 VBR，請您確認地域是否正確，更換地域後再試。 | diagnosis | |
| MCMS_VPC_EMPTY | Specified region have no vpc. | 該地域沒有 VPC，請您確認地域是否正確，更換地域後再試。 | diagnosis | |
| 400 | Mismatch.%sAnd%s | The %s and %s are mismatched. | 參數不匹配，請檢查參數。 | diagnosis |
| 400 | Mismatch.CbwpZoneAndCloudBoxEipZone | The CbwpZone and EipZone are mismatched. | 雲盒共用頻寬和 EIP 的可用區不匹配。 | diagnosis |
| 400 | Mismatch.CloudBoxCbwpZoneAndEipZone | The CbwpZone and EipZone are mismatched. | 雲盒共用頻寬和 EIP 的可用區不匹配。 | diagnosis |
| 400 | Mismatch.EipSecurityProtectionTypeAndPoolSecurityProtectionType | The EipSecurityProtectionType and PoolSecurityProtectionType are mismatched. | EIP 安全防護類型與位址池安全防護類型不匹配。 | diagnosis |
| 400 | Mismatch.EniIdAndRouteTableId | The operation is not allowed because eni and route table not in same vpc. | 操作失敗，因為指定的彈性網卡和路由表不屬於同一個 Vpc。 | diagnosis |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | 傳入的高可用虛擬 IP 與路由表不屬於同一個 VPC。 | diagnosis |
| 400 | Mismatch.IpAndBandwidthPackage | The IP does not match the bandwidth package and is not in the specified bandwidth package. | Ip 和頻寬包不匹配，不在指定頻寬包中。 | diagnosis |
| 400 | Mismatch.IpAndIsp | The specified IP address does not match the ISP. | 申請指定 IP 失敗，ISP 和 IP 參數不匹配。 | diagnosis |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | 操作失敗，傳入的 IPv4 閘道和路由表不屬於同一 VPC。 | diagnosis |
| 400 | Mismatch.Ipv6AddressAndIpv6Gateway | The %s and %s are mismatched. | 指定的 Ipv6Address 和 Ipv6Gateway 不在同一 VPC 內。 | diagnosis |
| 400 | Mismatch.IpVersionAndIpamPoolIpVersion | The input IpVersion is inconsistent with the IpVersion of the input IPAM pool. | 輸入的 IpVersion 和輸入的位址池的 IpVersion 不一致。 | diagnosis |
| 400 | Mismatch.NatIpAndNatIpCidr | The %s and %s are mismatched. | %s 和 %s 不匹配。 | diagnosis |
| 400 | Mismatch.NetworkAclAndVSwitch | The specified network ACL and vSwitch are not matched. | 指定的網路 ACL 和交換機沒有關聯關係。 | diagnosis |
| 400 | Mismatch.ResourceRegionAndServiceRegion | The region where the resource is located is inconsistent with the region where the service is called. | 資源所在地域和呼叫服務的地域不一致。 | diagnosis |
| 400 | Mismatch.VSwitchAndPrivateIpAddress | The vswitch and privateIpAddress are mismatched. | 當前指定的私網 IP 和交換機不匹配。 | diagnosis |
| 400 | MissingParam | MissingParameter %s | 參數缺失。 | diagnosis |
| 400 | MissingParam | Miss mandatory parameter. | 缺少必要參數。 | diagnosis |
| 400 | MissingParam.%s | The param of %s is missing. | 參數缺失。 | diagnosis |
| 400 | MissingParam.Action | You must specify Action. | 動作參數未指定。 | diagnosis |
| 400 | MissingParam.AliUid | You must specify AliUid. | AliUid 缺失。 | diagnosis |
| 400 | MissingParam.AliUid | AliUid is missing. | AliUid 參數缺失。 | diagnosis |
| 400 | MissingParam.aliUid | The param of aliUid is missing. | 參數 aliUid 缺失。 | diagnosis |
| 400 | MissingParam.AssociatedInstanceId | The param of AssociatedInstanceId is missing when AssociatedInstanceType is specified. | 參數 AssociatedInstanceId 缺失。 | diagnosis |
| 400 | MissingParam.Bandwidth | You must specify Bandwidth. | 參數頻寬缺失。 | diagnosis |
| 400 | MissingParam.Bandwidth | Missing param of Bandwidth. | Bandwidth 參數缺失。 | diagnosis |
| 400 | MissingParam.bid | The param of bid is missing. | 參數 bid 缺失。 | diagnosis |
| 400 | MissingParam.BindInstanceId | The param of BindInstanceId is missing. | 參數 BindInstanceId 缺失。 | diagnosis |
| 400 | MissingParam.CidrBlockOrCidrMask | CidrBlock or CidrMask is not specified. | 給位址池添加位址段失敗，因為缺少位址段或遮罩參數。 | diagnosis |
| 400 | MissingParam.CidrOrCidrMask | The CIDR or CIDR Mask must be input. | 從 IPAM 位址池建立資源時，請輸入 Cidr 或 CidrMask。 | diagnosis |
| 400 | MissingParam.CidrReservationMaskOrCidrReservationCidr | Either VSwitchCidrReservationMask or VSwitchCidrReservationCidr should be specified. | VSwitchCidrReservationMask 和 VSwitchCidrReservationCidr 不能同時為空，請指定其中一個重試。 | diagnosis |
| 400 | MissingParam.ConstructionTime | The parameter ConstructionTime is mandatory. | 計劃施工時間必須填寫。 | diagnosis |
| 400 | MissingParam.context | The param of context is missing. | 參數 context 缺失。 | diagnosis |
| 400 | MissingParam.CustomerGatewayAsn | Asn of customer gateway is mandatory when BGP is enabled. | 開啟 BGP 時，客戶閘道的自治系統號不可以為空。 | diagnosis |
| 400 | MissingParam.Description | You must specify Description. | 執行個體的描述是必要的。 | diagnosis |
| 400 | MissingParam.DstCidrBlock | You must specify destination CIDR block. | 目的 CIDR 未指定。 | diagnosis |
| 400 | MissingParam.EnableIpv6 | The input parameter EnableIpv6 that is mandatory for processing this request is not supplied. | 缺少 EnableIpv6 參數。 | diagnosis |
| 400 | MissingParam.EnableIpv6 | The param of EnableIpv6 is missing. | 參數 EnableIpv6 缺失。 | diagnosis |
| 400 | MissingParam.FilterId | You must specify filter instance ID. | 篩選條件執行個體 id 參數未指定。 | diagnosis |
| 400 | MissingParam.FullnatTableIdOrNatGatewayId | FullnatTableId and natGatewayId can not both be null | FullnatTableId 和 natGatewayId 不能同時為空。 | diagnosis |
| 400 | MissingParam.IDaaSApplicationId | The input parameter IDaaSApplicationId is mandatory when enable multi-factor authentication. | 啟動雙因子認證時請輸入 IDaaSApplicationId 參數。 | diagnosis |
| 400 | MissingParam.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | 當開啟雙因子認證時，IDaaS 執行個體 ID 是必填的參數。 | diagnosis |
| 400 | MissingParam.IDaaSRegionId | The input parameter IDaaSRegionId is mandatory when enable multi-factor authentication. | 啟動雙因子認證時請輸入 IDaaSRegionId 參數。 | diagnosis |
| 400 | MissingParam.InstanceId | You must specify InstanceId. | Missing param of InstanceId. | diagnosis |
| 400 | MissingParam.InstanceId | Missing param of InstanceId. | InstanceId 參數缺失。 | diagnosis |
| 400 | MissingParam.InstanceId | The parameter InstanceId is mandatory. | 實體專線執行個體 ID 必須填寫。 | diagnosis |
| 400 | MissingParam.InstanceId | The param of InstanceId can't be null or empty. | InstanceId 不可以為空。 | diagnosis |
| 400 | MissingParam.Ipv6CidrBlock | The parameter Ipv6CidrBlock is mandatory. | 參數缺失，Ipv6CidrBlock 是必選參數。 | diagnosis |
| 400 | MissingParam.Ipv6InstanceId | The param of Ipv6InstanceId is missing. | Ipv6InstanceId 未指定。 | diagnosis |
| 400 | MissingParam.IpVersion | The parameter IpVersion is missing. | 參數 IpVersion 缺失。 | diagnosis |
| 400 | MissingParam.Name | You must specify Name. | 執行個體名稱缺失。 | diagnosis |
| 400 | MissingParam.NatGatewayId | You must specify NatGatewayId. | 參數 NatGatewayId 必填。 | diagnosis |
| 400 | MissingParam.NetworkInterfaceId | The input parameter NetworkInterfaceId that is mandatory for processing this request is not supplied. | 為開啟了私網連結服務的 NAT 建立 SNAT 規則時需要指定 NetworkInterfaceId 參數。 | diagnosis |
| 400 | MissingParam.NewNextHopId | The parameter NewNextHopId is mandatory. | 修改路由條目下一跳缺失待修改路由條目下一跳執行個體 ID 資訊。 | diagnosis |
| 400 | MissingParam.NewNextHopType | The parameter NewNextHopType is mandatory. | 修改路由條目下一跳缺失待修改路由條目下一跳執行個體類型資訊。 | diagnosis |
| 400 | MissingParam.ParameterMustNotNull | %s, %s. | 缺少必須傳入的參數。 | diagnosis |
| 400 | MissingParam.PeerIpAddress | The param of PeerIpAddress is missing. | 缺少參數對端 IP 位址。 | diagnosis |
| 400 | MissingParam.PhysicalConnectionId | You must specify PhysicalConnectionId. | PhysicalConnectionId 缺失。 | diagnosis |
| 400 | MissingParam.PhysicalConnectionId | PhysicalConnectionId is missing. | PhysicalConnectionId 參數缺失。 | diagnosis |
| 400 | MissingParam.PMInfo | The parameter PMInfo is mandatory. | 施工工程師資訊必須填寫。 | diagnosis |
| 400 | MissingParam.Priority | You must specify Priority. | 優先順序參數未指定。 | diagnosis |
| 400 | MissingParam.Protocol | You must specify Protocol. | 協定參數未指定。 | diagnosis |
| 400 | MissingParam.PublicIpAddressPoolId | The parameter PublicIpAddressPoolId is missing. | 參數 PublicIpAddressPoolId 缺失。 | diagnosis |
| 400 | MissingParam.RegionNo | You must specify RegionNo. | RegionNo 缺失。 | diagnosis |
| 400 | MissingParam.RegionNo | RegionNo is missing. | RegionNo 參數缺失。 | diagnosis |
| 400 | MissingParam.RemoteId | The remote ID is mandatory when creating national standard VPN connection. | 當建立國密 VPN 連線時，對端 ID 是必填參數。 | diagnosis |
| 400 | MissingParam.ReservedCidrOrReservedCidrMask | MissingParam.ReservedCidrOrReservedCidrMask | ReservedCidr 或 ReservedCidrMask 必須指定其中一個。 | diagnosis |
| 400 | MissingParam.Resource | Missing parameter Resource. | 參數 Resource 缺失。 | diagnosis |
| 400 | MissingParam.ResourceType | The param of ResourceType is missing. | 參數 ResourceType 缺失。 | diagnosis |
| 400 | MissingParam.RouteEntries | The parameter RouteEntries is missing. | 參數 RouteEntries 缺失。 | diagnosis |
| 400 | MissingParam.RouteEntryId | The param of %s is missing. | 缺少必須參數。 | diagnosis |
| 400 | MissingParam.RouteEntryIdOrRouteTableDstCidr | The request is missing required parameters. You must provide either the RouteEntryId or the combination of RouteTableId and DestinationCidrBlock to proceed. Please ensure that one of these parameter sets is included in your request. | 請求缺少必要參數。您必須提供 RouteEntryId，或者同時提供 RouteTableId 和 DestinationCidrBlock。 | diagnosis |
| 400 | MissingParam.RuleId | You must specify rule instance ID. | 流量鏡像篩選規則執行個體 ID 參數未指定。 | diagnosis |
| 400 | MissingParam.Rules | You must specify rule instance ID. | 流量鏡像篩選規則執行個體 ID 未指定。 | diagnosis |
| 400 | MissingParam.ScheduledMigrationParam | You must specify the parameters that are required for the scheduled migration. | NAT 閘道預約遷移的必要參數缺失。 | diagnosis |
| 400 | MissingParam.SecondaryCidrBlockOrIpv6CidrBlock | Either SecondaryCidrBlock or Ipv6CidrBlock must be specified. | 缺少必填參數附加網段或者 IPv6 網段。 | diagnosis |
| 400 | MissingParam.SecondaryCidrMask | The parameter SecondaryCidrMask must be input. | SecondaryCidrMask 參數需要輸入。 | diagnosis |
| 400 | MissingParam.SecondaryCidrOrIpv6Cidr | Either the SecondaryCidrBlock or the Ipv6CidrBlock parameter is required, but both cannot be entered simultaneously. | 不透過 IPAM 位址池為 VPC 新增附加網段時，參數 SecondaryCidrBlock 和參數 Ipv6CidrBlock 必須輸入一個且不能都輸入。 | diagnosis |
| 400 | MissingParam.SnatIp | The input parameter SnatIp that is mandatory for processing this request is not supplied. | 為公網 NAT 或私網 NAT 建立 SNAT 規則時需要指定 SnatIp 參數。 | diagnosis |
| 400 | MissingParam.SourceInstanceIds | You must specify source instance ID. | 流量鏡像來源執行個體 ID 參數未指定。 | diagnosis |
| 400 | MissingParam.Spec | The param of Spec is missing. | Spec 參數缺失。 | diagnosis |
| 400 | MissingParam.SrcCidrBlock | You must specify source CIDR block. | 來源 CIDR 未指定。 | diagnosis |
| 400 | MissingParam.Tags | You must specify the Tags parameter. | Tags 參數缺失。 | diagnosis |
| 400 | MissingParam.Tags | The Tags parameter is required. | Tags 參數是必需的。 | diagnosis |
| 400 | MissingParam.TimePoint | You must specify TimePoint. | 參數 TimePoint 必填。 | diagnosis |
| 400 | MissingParam.TrafficAnalyzerIdOrLogProjectOrLogStore | TrafficAnalyzerId and ProjectName and LogStoreName parameters are not passed in. | TrafficAnalyzerId與ProjectName和LogStoreName 參數都未傳入。 | diagnosis |
| 400 | MissingParam.TrafficMirrorRules | You must specify traffic mirror rules. | 流量鏡像篩選規則未指定。 | diagnosis |
| 400 | MissingParam.VbrHaIdOrVbrId | Missing parameter VBR switch group instance ID or VBR instance ID. | 缺少參數 VBR 倒換組執行個體 ID 或者 VBR 執行個體 ID。 | diagnosis |
| 400 | MissingParam.VbrId | You must specify VbrId. | vbrId缺失。 | diagnosis |
| 400 | MissingParam.VpcId | You must specify VpcId. | 缺少必填參數VpcId。 | diagnosis |
| 400 | MissingParam.vpcId | The parameter vpcId is mandatory. | 參數缺失，vpcId是必選參數。 | diagnosis |
| 400 | MissingParam.VSwitchId | The parameter VSwitchId is missing. | 參數VSwitchId缺失。 | diagnosis |
| 400 | MissingParam.Zones | The Zones parameter is required. | 參數Zones必填。 | diagnosis |
| MissingParameter | Missing mandatory parameter | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | Either nexthopId or nextHopList should be specified | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | The input parameter is mandatory for processing this request is not supplied. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | The input parameter 'PhysicalConnectionId' that is mandatory for processing this request is not supplied. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | The input parameter 'VlanId' that is mandatory for processing this request is not supplied. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | The input parameter 'LocalGatewayIp' that is mandatory for processing this request is not supplied. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | The input parameter 'PeerGatewayIp' that is mandatory for processing this request is not supplied. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | The input parameter 'PeeringSubnetMask' that is mandatory for processing this request is not supplied. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | LocalGatewayIp | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | Miss mandatory parameter. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| MissingParameter | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | ||
| MissingParameter | The input parameter OwnerId | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis | |
| 400 | MissingParameter | LocalGatewayIp, peerGatewayIp and peeringSubnetMask must not be null. | 參數缺失LocalGatewayIp，peerGatewayIp，peeringSubnetMask不能為空。 | diagnosis |
| 400 | MissingParameter.bandwidth | portType and bandWidth cannot be null at the same time. | 連接埠類型和頻寬值不可同時為空。 | diagnosis |
| MissingParameter.BandwidthPackage | only support one BandwidthPackage be created with NatGateway. | 必須指定一個共用頻寬包。 | diagnosis | |
| 400 | MissingParameter.IDaaSInstanceId | The input parameter IDaaSInstanceId is mandatory when enable multi-factor authentication. | 啟動雙因子認證時請輸入IDaaSInstanceId參數。 | diagnosis |
| 400 | MissingParameter.TagKey | The input parameter TagKey that is mandatory for processing this request is not supplied. | 缺少參數TagKey。 | diagnosis |
| 400 | MissingParameter.TagValue | The input parameter TagValue that is mandatory for processing this request is not supplied. | 缺少參數TagValue。 | diagnosis |
| 400 | MissingParameter.TunnelCidr | The parameter TunnelCidr is mandatory when BGP is enabled. | 開啟BGP時，隧道CIDR參數是必填項。 | diagnosis |
| 400 | MissingParameter.TunnelOptionsSpecification | The required parameters are missing when creating a tunnel for dual-tunnel VPN. | 雙隧道VPN在建立隧道時，必填參數缺失。 | diagnosis |
| 400 | ModifyIkeV1WithMultiRoutes.Invalid | Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol. | 修改VPN連線參數失敗，在使用IkeV1協定的同時配置了多網端。 | diagnosis |
| 400 | MultiplePconnSingleVbrNotSupportShutdown | Vbr for single vbr and multiple pconn scenarios does not support failover test job. | 單vbr多pconn場景的vbr不支援故障演練。 | diagnosis |
| NATGATEWAY_FINANCIALLOCKED | 指定的NAT閘道已過期。 | diagnosis | ||
| NATGW_MODIFY_SPEC_SAME | The specified Spec is same with now. | 該規格和當前規格一樣。 | diagnosis | |
| 400 | NATGW_NOT_EXIST | The specified NAT gateway does not exist. | 該 NAT 閘道不存在。 | diagnosis |
| 400 | NetworkAclExistBinding | The Network Acl has bindings. | Network Acl具有繫結。 | diagnosis |
| 400 | NetworkStatus.Modifying | The special Network Acl is in modifying. | 特殊網路Acl正在修改中。 | diagnosis |
| NOCARD | 使用者沒有綁卡。 | diagnosis | ||
| 400 | NoPermission.CreateServiceLinkedRole | You are not authorized to create service linked role. | 您沒有權限建立SLR。 | diagnosis |
| 400 | NotFound.BandwidthPackage | BandwidthPackage is not exist. | 指定的頻寬包不存在。 | diagnosis |
| 405 | NotSupportLinkrole | The router interface is not a VLAN interface for connection. | 路由器介面為使用者側介面，不可啟用。 | diagnosis |
| 400 | NotSupportLinkrole | This RouterInterface is not a vlan interface for connection. | 該路由器介面不是用於連線的虛擬網路介面。 | diagnosis |
| 400 | NotSupportVpnConnectionParameter.IpsecAuthAlg | The specified vpn connection ipsec Auth Alg is not support. | IPsec 連線中指定的認證演算法不支援。 | diagnosis |
| 400 | NotSupportVpnConnectionParameter.IpsecPfs | The specified vpn connection ipsec Ipsec Pfs is not support. | IPsec 連線中指定的 Pfs 參數不支援。 | diagnosis |
| NOT_ALLOW_USE_SOURCECIDR | The User not in nat_scope_unlimited white list. Cannot use SourceCidr param. | 內網 IP 超出 VPC 網段範圍。 | diagnosis | |
| NO_REAL_NAME_AUTHENTICATION | 帳戶尚未完成實名認證。 | diagnosis | ||
| 400 | nsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not support to enable security protection. | VPC NAT 閘道不支援開啟安全防護。 | diagnosis |
| 400 | nvalidPhysicalConnectionPeriod.Malformed | Specified Physical Connection Period is not valid. | Period 參數無效。 | diagnosis |
| 409 | OperationConflict | Request was denied due to conflict with a previos request. | 請求衝突，請稍後重試。 | diagnosis |
| 409 | OperationConflict | The operation against this instance is too frequent, please try again later. | 對該執行個體的操作過於頻繁，請稍後重試。 | diagnosis |
| 409 | OperationConflict | Request was denied due to conflict with a previous request. | 請求衝突，請稍後重試。 | diagnosis |
| OperationDenied | Eip of default vpc not allow this operation | 不允許刪除系統產生的路由項。 | diagnosis | |
| OperationDenied | The operation is not supported in this status. | 不允許刪除系統產生的路由項。 | diagnosis | |
| OperationDenied | The snapshot creation for the specified disk is not finished yet. | 不允許刪除系統產生的路由項。 | diagnosis | |
| OperationDenied | Specified operation is denied as route entry type is system. | 不允許刪除系統產生的路由項。 | diagnosis | |
| OperationDenied | Specified instance is not in VPC. | 不允許刪除系統產生的路由項。 | diagnosis | |
| OperationDenied | The user cannot allow to create natgw | 不允許刪除系統產生的路由項。 | diagnosis | |
| 400 | OperationDenied.AccountTypeRestricted | The operation is denied because your account type is not supported. | 您的帳戶類型不支援此次交易。 | diagnosis |
| 400 | OperationDenied.AllTrafficPathOfManagedExist | The resource you specified has created a flow log instance that collects the traffic of all scenarios. You cannot create a flow log instance that collects only some scenarios. | 您指定的資源已經建立了採集全部場景的流量的流日誌執行個體，不能再建立僅採集部分場景的流日誌執行個體。 | diagnosis |
| 400 | OperationDenied.AlreadyNewest | The operation is denied because the firmware version of the VPN gateway is already the latest. | 目前 VPN 閘道的韌體版本已經是最新了，不能再次升級。 | diagnosis |
| 400 | OperationDenied.AssociateGatewayRouteTable | The operation is not allowed because gateway route tables cannot be bound to a vSwitch. | 交換機不允許繫結閘道路由表。 | diagnosis |
| 400 | OperationDenied.AvailableCidrInsufficient | The operation is not allowed because available CIDR is insufficient. | 操作被拒絕，原因是可用的 CIDR 資源不足。 | diagnosis |
| 400 | OperationDenied.BetweenFinanceUserAndNormalUser | Creating VPC connection between financial user and non-financial user is not allowed. | 不允許金融雲帳號和普通帳號間建立 VPC 互聯。 | diagnosis |
| 400 | OperationDenied.CenAttached | The operation is not allowed because the VPC is attached to CEN. | 指定操作被禁止，因為 VPC 關聯了 CEN。 | diagnosis |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | 不支援在路由表中建立路由指向此類型的 CEN。 | diagnosis |
| 400 | OperationDenied.CidrInExcludeCidrs | The operation is not allowed because the input CIDR is within the illegal CIDRs. | 操作被拒絕，原因是輸入的 CIDR 在不合法的 CIDR 範圍內。 | diagnosis |
| 400 | OperationDenied.CidrUnavailableInPool | The operation is not allowed because the CIDR is unavailable in the IPAM pool. | 操作被拒絕，原因是 CIDR 在 IPAM 位址池中不可用。 | diagnosis |
| 400 | OperationDenied.ClassicSLB | The operation is not allowed because of ClassicSLB. | 目前操作不支援傳統型負載平衡執行個體。 | diagnosis |
| 400 | OperationDenied.CloudBoxResourceExist | The operation is not allowed because there are resources related to the cloud box in VPC. | 指定操作被禁止，因為 VPC 中存在雲盒相關的資源。 | diagnosis |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | 指定操作被禁止，因為只有自訂路由表能夠新增下一跳指向雲盒類型 VBR 的路由條目。 | diagnosis |
| 400 | OperationDenied.CloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop to the cloud box VBR. | 指定操作不允許，因為路由表存在下一跳指向雲盒 VBR 的路由條目。 | diagnosis |
| 400 | OperationDenied.CloudBoxVSwitch | The operation is not allowed because the vswitch is a cloud box type. | 指定操作被禁止，因為虛擬交換機是雲盒類型的。 | diagnosis |
| 400 | OperationDenied.CloudBoxVSwitchExist | The operation is not allowed because a cloud box type vSwitch exists in VPC. | 指定操作被禁止，因為 VPC 中存在雲盒類型的虛擬交換機。 | diagnosis |
| 400 | OperationDenied.CloudBoxZone | The operation is not allowed because the zone is a cloud box type. | 指定操作被禁止，因為可用區是雲盒類型的。 | diagnosis |
| 400 | OperationDenied.CreateEcmpForPublishedRouteEntry | Operation denied because of can not create EcmpRouteEntry for published RouteEntry. | 已發佈路由不支援建立主備路由或負載平衡路由。 | diagnosis |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact you CBM. | 無權限建立共用專線，請聯繫商務經理。 | diagnosis |
| 400 | OperationDenied.CreateVpconn | You are not allowed to create virtual physical connection. Please contact your CBM. | 無權限建立共用專線，請聯繫商務經理。 | diagnosis |
| 400 | OperationDenied.DeleteGatewayEndpointRoute | The operation is not allowed to delete route entry pointing gateway endpoint.. | 無法手動刪除指向 GatewayEndpoint 的路由。 | diagnosis |
| 400 | OperationDenied.DeleteManagedRouteEntry | The operation is not allowed because of route entry is managed. | 無法刪除被雲端服務託管的路由。 | diagnosis |
| 400 | OperationDenied.DeleteShareResource | This is not allowed to delete shared prefixList. | 無法刪除共用 PrefixList。 | diagnosis |
| 400 | OperationDenied.DirectEipExist | The operation is not allowed because of existing directEip. | 操作不允許，該 VPC 下存在直通 EIP 或增強型 NAT 閘道。 | diagnosis |
| 400 | OperationDenied.DnatEntryStatusInvalid | The NAT gateway has DNAT entry in invalid status. | NAT 閘道設定的 DNAT 狀態無效。 | diagnosis |
| 400 | OperationDenied.DuplicateRole | The network interface must not be the source and the target of traffic mirror sessions at the same time. | 網路卡不能同時作為流量鏡像工作階段的來源和目的。 | diagnosis |
| 400 | OperationDenied.EcsNotSupportTrafficMirror | The ECS instance does not support traffic mirroring. | ECS 執行個體不支援流量鏡像功能。 | diagnosis |
| 400 | OperationDenied.EipBondTypeIsAlreadyNAT | The EIP bond type is already NAT type. | EIP 繫結類型已經是 NAT 類型。 | diagnosis |
| 400 | OperationDenied.EipStatusInvalid | The NAT gateway has EIP in invalid status. | NAT 閘道繫結的 EIP 狀態無效。 | diagnosis |
| 400 | OperationDenied.ExistDirectEip | The operation is not allowed because of existing direct eip. | 不允許建立 IPv4 閘道，因為存在直通 EIP。 | diagnosis |
| 400 | OperationDenied.ExistPublicIpv6IpInVpc | Operation denied because IPV6 public ip exists in VPC. | 操作失敗，因為 VPC 中存在 IPv6 公網 IP。 | diagnosis |
| 400 | OperationDenied.ExistRouteTable1.0 | A route table with a lower version exists in the VPC. Please submit a ticket for processing. | 該 VPC 內存在低版本的路由表，請提交工單處理。 | diagnosis |
| 400 | OperationDenied.ExistRouteTableV1 | The operation is not allowed because of existing RouteTable1.0. | 操作被拒絕，原因是存在路由表 1.0。 | diagnosis |
| 400 | OperationDenied.FlowLogDeliverFailed | The operation is not allowed due to an invalid delivery address. | 流日誌投遞位址無效，無法啟動該流日誌。 | diagnosis |
| 400 | OperationDenied.FreeNetworkInterface | The network interface is not attached to any ECS instance. | 指定的網路卡未繫結任何 ECS 執行個體。 | diagnosis |
| 400 | OperationDenied.GatewayAlreadyAssociated | The operation is not allowed because of the specified resource %s is already associated. | 操作不允許，因為指定的 IPv4 閘道處於繫結狀態。 | diagnosis |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The gateway and the route table are not in the same VPC. | 閘道與路由表不在同一個 VPC 內不允許關聯。 | diagnosis |
| 400 | OperationDenied.GatewayAndTableNotInOneVpc | The operation is not allowed because of GatewayAndTableNotInOneVpc. | 您指定的閘道路由表和閘道執行個體不屬於同一個 VPC，請檢查您的輸入是否正確。 | diagnosis |
| 400 | OperationDenied.GatewayAssociated | You cannot delete the specified route table because it still associates with gateway. | 無法刪除指定的路由表，因為路由表繫結了閘道。 | diagnosis |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | 閘道路由表中不支援建立指向此執行個體類型的路由條目。 | diagnosis |
| 400 | OperationDenied.IllegalNewNextHopType | When modifying the next hop of a route of the local type, a new next hop type that is not supported is passed in. | 修改 local 類型的路由下一跳時，傳入了不支援的新的下一跳類型。 | diagnosis |
| 400 | OperationDenied.IngressRoutingNotSupportAnycast | The operation is not allowed because ingress routing not support anycast. | 操作失敗，因為指定 VPC 中存在 Anycast 彈性公網 IP。 | diagnosis |
| 400 | OperationDenied.InstanceAttachCen | Operation denied because instance association CEN. | 操作失敗由於執行個體關聯 CEN。 | diagnosis |
| 400 | OperationDenied.InvalidInstanceDeliverScope | When modifying the delivery purpose of the FlowLog instance or starting and stopping NIS traffic analysis, you specify the type of delivery that is not allowed. | 在修改 FlowLog 執行個體的投遞目的或者啟停 NIS 流量分析時，指定了不被允許的投遞類型。 | diagnosis |
| 400 | OperationDenied.InvalidSourceBondEniType | The traffic mirroring source does not support the entered bond ENI type. | 流量鏡像來源不支援所輸入的託管彈性網路卡類型。 | diagnosis |
| 400 | OperationDenied.InvalidTargetBondEniType | The traffic mirroring target does not support the entered bond ENI type. | 流量鏡像目的不支援所輸入的託管彈性網路卡類型。 | diagnosis |
| 400 | OperationDenied.IpamPoolNotInRegion | The operation is not allowed because the IPAM pool not in specific region does not support creating VPC or associating CIDR for VPC. | 操作被拒絕，因為無法從不具備地域屬性的位址池中建立 VPC 或為 VPC 新增附加網段。 | diagnosis |
| 400 | OperationDenied.IpBelongToOtherUser | The operation is not allowed because of ip belong to other user. | 申請失敗，該 IP 歸屬其他使用者。 | diagnosis |
| 500 | OperationDenied.Ipv4GatewayExist | The operation is not allowed because of Ipv4GatewayExist. | EIP 繫結操作失敗，因為此 VPC 下存在 IPv4 閘道。 | diagnosis |
| 400 | OperationDenied.Ipv4GatewayNotActive | The operation is not allowed because of ipv4Gateway [%s] is not active. | 操作不允許，因為指定的 IPv4 閘道未啟用。 | diagnosis |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | 不允許在自訂路由表上建立 IPv6 路由。 | diagnosis |
| 400 | OperationDenied.ISPNotSupportDdosEnhanced | The operation is not allowed because of DdosEnhanced is not supported by current isp. | 當前 ISP 不支援建立增強型安全防護位址池。 | diagnosis |
| 400 | OperationDenied.L2EipBindIpAddress | Operation is denied because this region does not support L2 EIP binding to IP address. | 此地域暫不支援 L2 EIP 繫結 IP 位址。 | diagnosis |
| 400 | OperationDenied.LOAForVirtualPhysicalConnection | The operation is not allowed because of LOAForVirtualPhysicalConnection. | 共用實體專線不允許施工。 | diagnosis |
| 400 | OperationDenied.LOAStatusNotAllowComplete | The operation is not allowed because of LOAStatusNotAllowComplete. | 連接埠的 LOA 狀態不允許完工報竣或者線路維運。 | diagnosis |
| 400 | OperationDenied.LocalEntryCanOnlyModifyNextHop | Only the nextHop parameter can be modified for a local route entry. | Local 路由只能修改下一跳屬性。 | diagnosis |
| 400 | OperationDenied.LocalRouteEntryBoundToVSwitch | The VSwitch to which the local route you modified belongs is bound to the current routing table. You are not allowed to modify its next hop. | 您所修改的 Local 路由所屬的交換器正與當前路由表繫結，禁止修改其下一跳。 | diagnosis |
| 400 | OperationDenied.LocalRouteEntryInSystemRouteTable | The Local Route Entry In System Route Table Can Not Be Modify. | 禁止修改系統路由表中的 Local 路由。 | diagnosis |
| 400 | OperationDenied.LocalRouteEntryModified | The next hop of a local route is modified. | 存在 local 類型的路由下一跳被修改了。 | diagnosis |
| 400 | OperationDenied.LocalRouteEntryModified | When you modify the next hop of a Local route in a custom routing table, the destination CIDR block of the Local route is exactly the same as the Cidr of a VSwitch bound to the routing table. | 修改自訂路由表 Local 路由的下一跳時，該 Local 路由的目的網段恰好和路由表繫結的某個交換器的 CIDR 相等。 | diagnosis |
| 400 | OperationDenied.MaskOfCidrIsNotAllowed | The input mask or mask of the input CIDR is not allowed. | 輸入的遮罩或 CIDR 的遮罩不在允許的範圍內。 | diagnosis |
| 400 | OperationDenied.MissingAsn | The autonomous system number of the customer gateway is mandatory when BGP authentication key is specified. | 當指定了使用者閘道的 BGP 驗證金鑰時，必須指定自治系統號。 | diagnosis |
| 400 | OperationDenied.ModifyDefaultDhcpOptionsSet | The default DHCP options set is not allowed to be modified. | 預設 DHCP 選項集不允許修改。 | diagnosis |
| 400 | OperationDenied.ModifyManagedRouteEntry | The operation is not allowed because of route entry is managed. | 無法修改被託管的路由。 | diagnosis |
| 400 | OperationDenied.NatGatewayStatusInvalid | The NAT gateway status is invalid. | NAT 閘道的狀態無效。 | diagnosis |
| 400 | OperationDenied.NatgwExist | The operation is not allowed because the NAT gateway exists in VPC. | 指定操作被禁止，因為 VPC 中建立有 NAT 閘道。 | diagnosis |
| 400 | OperationDenied.NeedPconnOwner | The operation is denied. | 刪除失敗，需要實體連接埠的使用者去刪除。 | diagnosis |
| 400 | OperationDenied.NeedVpconnOwner | The operation is denied. | 刪除失敗，需要共用連接埠的使用者去刪除。 | diagnosis |
| 400 | OperationDenied.NewNextHopNotSupportPublish | New nexthop is not supported for published route entry. | 該路由條目已經發佈到其他元件，指定的下一跳類型不支援路由發佈。 | diagnosis |
| 400 | OperationDenied.NextHopExist | The operation is not allowed because the nexthop already exists. | 需要修改的目標路由條目下一跳已存在。 | diagnosis |
| 400 | OperationDenied.NextHopNotChanged | The operation is not allowed because of NextHopNotChanged. | 指定操作被禁止，因為下一跳未發生改變。 | diagnosis |
| 400 | OperationDenied.NextHopTypeNonsupport | The operation is not allowed because of nextHopType is nonsupport. | 不支援指定該資源類型為下一跳。 | diagnosis |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | 不允許建立下一跳為此類型的路由。 | diagnosis |
| 400 | OperationDenied.NisTrafficAnalyzerAggregationIntervalMismatch | The sampling interval of the FlowLog is greater than the sampling interval of the NIS Traffic Analyzer. | FlowLog 的取樣間隔大於 NIS 流量分析器的取樣間隔。 | diagnosis |
| 400 | OperationDenied.NisTrafficAnalyzerNotActive | The specified NIS Traffic Analyzer is not enabled. | 指定的 NIS 流量分析器處於非開啟狀態。 | diagnosis |
| 400 | OperationDenied.NisTrafficAnalyzerNotFound | The specified NIS Traffic Analyzer does not exist. | 指定的 NIS 流量分析器不存在。 | diagnosis |
| 400 | OperationDenied.NoAvailablePrivateIp | The operation is failed because of vSwitch has not availalbe private ip | 當前虛擬交換器下的可用私網 IP 不足。 | diagnosis |
| 400 | OperationDenied.NoEnoughAvailablePrivateIps | The available private Ip number is not enough in your subnet. | 子網中可用的私網 IP 不夠。 | diagnosis |
| 400 | OperationDenied.NormalNatExist | The operation is not allowed because of existing normalNat. | 操作不允許，該 VPC 下存在普通型 NAT 閘道。 | diagnosis |
| 400 | OperationDenied.NotAttachCen | The operation is not allowed because the instance is not attached to a CEN instance. | 執行個體未載入到 CEN，該操作禁止。 | diagnosis |
| 400 | OperationDenied.NotOpenDdosOriginProtectService | The operation is not allowed because of you do not open Ddos Origin Protection Service | 無法建立 DDoS 防護（增強版）Eip，因為沒有購買 DDoS 原生防護服務。 | diagnosis |
| 400 | OperationDenied.OperateSharedResource | The operation is not allowed because of the PublicIpAddressPool is a shared resource. | 該公網 IP 位址池執行個體是共用資源，不允許修改。 | diagnosis |
| 400 | OperationDenied.OperateShareResource | The operation is not allowed because of OperateShareResource. | 操作共用資源導致操作失敗。 | diagnosis |
| 400 | OperationDenied.OtherCloudBoxVbrEntryExist | The operation is not allowed because the routing table has a route entry for the next hop that points to a VBR other than this cloud box. | 指定操作不允許，因為路由表存在下一跳指向非本雲盒 VBR 的路由條目。 | diagnosis |
| 400 | OperationDenied.OtherSubnetCreating | The operation is not allowed because a subnet is being created. | 指定操作被禁止，因為有其他虛擬子網正在建立。 | diagnosis |
| 400 | OperationDenied.OtherSubnetProcessing | other subnet is processing. | 無法刪除當前虛擬交換器（vSwitch），因為其他子網正在操作中。 | diagnosis |
| 400 | OperationDenied.PconnNotAllowRecover | Exclusive physical connection does not allow recovery. | 當前資源無法執行此操作。請聯絡值班人員取得協助。 | diagnosis |
| 400 | OperationDenied.PconnTrafficNotEnable | Operation is not allowed because the outbound data transfer fees is not enabled. | 未開啟出雲端流量費，該操作禁止。 | diagnosis |
| 400 | OperationDenied.PrePaidInstance | The operation is not allowed because prepaid instance is no longer supported. | 預付費執行個體不再支援購買。 | diagnosis |
| 400 | OperationDenied.PrivateLinkNotEnabled | The NAT gateway is not enable for private link. | NAT 閘道未啟用私網連接。 | diagnosis |
| 400 | OperationDenied.QueryCdt95Instance | The operation is not allowed because of QueryCdt95Instance. | 不支援查詢已接入雲端資料傳輸的共用頻寬執行個體。 | diagnosis |
| 400 | OperationDenied.RemoveCountExceedExistCount | The operation is not allowed because of remove-count exceed exist-count. | 刪除 cidr 數量超過 prefixList 擁有的數量。 | diagnosis |
| 400 | OperationDenied.RequestRegionInvalid | The operation is not allowed because the request is not invoked in the region of the IPAM pool. | 操作被拒絕，因為未在位址池所在地域呼叫請求。 | diagnosis |
| 400 | OperationDenied.RouteEntryExist | The operation is not allowed because of existing routeEntry point to ipv4Gateway. | 無法刪除 Ipv4 閘道，因為存在到 Ipv4 閘道的路由。 | diagnosis |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | 指定操作被禁止，因為路由器介面來自不同的可用區。 | diagnosis |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | RouterInterface 不支援 IPv6。 | diagnosis |
| 400 | OperationDenied.RouterInterfaceIpv6NotEnabled | Routerinterface does not support IPv6. | RouterInterface 不支援 IPv6。 | diagnosis |
| 400 | OperationDenied.RouterInterfaceToDifferentVpc | The operation is not allowed because the router interface is connected to different VPCs. | 指定操作被禁止，因為路由器介面指向不同的 VPC。 | diagnosis |
| 400 | OperationDenied.RouteTableAssociateNotCloudBoxVSwitch | The operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added. | 指定操作被禁止，因為路由表繫結到了非雲盒類型的 vSwitch 上，不能新增指向雲盒 VBR 的路由條目。 | diagnosis |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of routeTableType is incorrect. | 操作不允許，因為路由表類型不對。 | diagnosis |
| 400 | OperationDenied.RouteTableTypeIncorrect | The operation is not allowed because of %s. | 您指定的閘道路由表執行個體不是邊界閘道路由表，請檢查您的輸入是否正確。 | diagnosis |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | 指定路由表類型不允許建立路由條目。 | diagnosis |
| 400 | OperationDenied.SlbNotInVpc | The specified SLB is not in any VPC. | 指定的 SLB 不屬於任何一個 VPC。 | diagnosis |
| 400 | OperationDenied.SnatEntryStatusInvalid | The NAT gateway has SNAT entry in invalid status. | NAT 閘道設定的 SNAT 條目狀態無效。 | diagnosis |
| 400 | OperationDenied.SubnetRouteV1Exist | The operation is not allowed because of existing subnetRouteV1. | 操作不允許，該 VPC 下子網路由不符合規格。 | diagnosis |
| 400 | OperationDenied.SwitchToSystemRouteTable | The associated route tables cannot be directly changed to system route tables. | 無法將繫結路由表直接切換為系統路由表。 | diagnosis |
| 400 | OperationDenied.SystemPrefixList | The status of traffic mirror filter is incorrect. | 無法操作系統 PrefixList。 | diagnosis |
| 400 | OperationDenied.SystemPrefixList | The operation is not allowed because of SystemPrefixList. | 不允許操作系統 PrefixList。 | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportBondEni | Operation denied because of target type can not be Bond Network Interface. | Bond 彈性網路卡不支援作為鏡像目的。 | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportGatewayLoadBalancerEndpoint | Operation denied because of target type can not be GatewayLoadBalancerEndpoint. | 閘道型負載平衡終端節點不支援作為流量鏡像目的。 | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportSourceType | The traffic mirroring target does not support the type of the traffic mirroring source. | 流量鏡像目的不支援該流量鏡像來源的類型。 | diagnosis |
| 400 | OperationDenied.TargetTypeNotSupportTrafficMirrorFullPacket | The traffic mirror session target type does not support the feature of mirroring source full packet. | 當前流量鏡像工作階段的目的類型不支援完整報文鏡像功能。 | diagnosis |
| 400 | OperationDenied.TerminateVirtualPhysicalConnection | The operation is not allowed because of TerminateVirtualPhysicalConnection. | VirtualPhysicalConnection 沒有權限或處於欠費狀態，該操作不被允許。 | diagnosis |
| OperationDenied.TooManyDataQueried | Specified operation is denied as too many data to return. | 一次查詢傳回的資料量過多。 | diagnosis | |
| 400 | OperationDenied.TrafficMirrorSessionSourceFullPacketNotSupport | The traffic mirror session does not support the feature of mirroring source full packet. | 流量鏡像當前不支援完整報文鏡像功能，TrafficMirrorSourceTruncateMode 只能設定為 0，即預設模式。 | diagnosis |
| 400 | OperationDenied.TrAttachmentIpv6Disabled | The operation is not allowed because tr attachment Ipv6 is disabled. | Tr Attachment 未開啟 IPv6 能力。 | diagnosis |
| 400 | OperationDenied.Unauthorized | The operation is not allowed because the user is not in the whitelist. | 此操作不被允許，使用者不在白名單。 | diagnosis |
| 400 | OperationDenied.UneffectiveChargeOrderExisted | The current operation is not allowed because there is an uneffective change order in your account. | 由於您的帳戶存在未生效的變配訂單，當前操作不被允許。 | diagnosis |
| 400 | OperationDenied.UnexpectedRouteTable | Operation is denied because only system route table supports publishing route entries. | 操作被拒絕，因為只有系統路由表支援發佈路由。 | diagnosis |
| 400 | OperationDenied.UnsupportedEipBindMode | The operation is not supported for the NAT gateway due to its EIP binding mode. | 此 NAT 閘道的 EIP 繫結類型不支援此操作。 | diagnosis |
| 400 | OperationDenied.UnsupportedTargetType | Traffic mirror target must be SLB if traffic mirror sources contain nat gateway network interface. | 流量鏡像來源中存在 NAT 閘道網路卡時，流量鏡像目的必須為 SLB 類型。 | diagnosis |
| 400 | OperationDenied.UnsupportedTargetType | The operation is not allowed because the target type is not supported. | 操作被拒絕，因為路由發佈目標的類型當前不支援。 | diagnosis |
| 400 | OperationDenied.UpdateGatewayRouteEntry | The operation is not allowed because of need switch to local first. | 修改閘道路由條目失敗，下一跳必須首先修改為 local 路由，才能自訂下一跳。 | diagnosis |
| 400 | OperationDenied.UseGatewayRouteEntryQueryInterface | Use listGatewayRouteTableEntries to describe gateway route entries. | 查詢閘道路由表路由條目，請使用 listGatewayRouteTableEntries 介面。 | diagnosis |
| 400 | OperationDenied.VBRAssociateVPconn | The operation is not allowed because of VBRAssociateVPconn. | VBR 不允許繫結 Vpconn。 | diagnosis |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | 由於邊界路由器正處於載入或者卸載專線閘道過程中，當前操作無法執行，請您稍等後重試。 | diagnosis |
| 400 | OperationDenied.VbrIdle | The operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state. | 指定操作被禁止，因為新增的路由條目下一跳是對端為 VBR 類型的 RI，不能處於閒置狀態。 | diagnosis |
| 400 | OperationDenied.VbrMisMatchCloudBox | The operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added. | 指定操作被禁止，因為路由表繫結到了一個雲盒 vSwitch 上，不能新增指向其他雲盒 VBR 的路由條目。 | diagnosis |
| 400 | OperationDenied.VpcExistIpv4Gateway | An IPv4 gateway already exists in the VPC. | 不允許新建 IPv4 閘道，因為 VPC 已經存在 IPv4 閘道。 | diagnosis |
| 404 | OperationDenied.VpcIpv4GatewayEnabled | The operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway. | 不允許操作，因為 NAT 閘道的 VPC 已經開啟 IPv4 閘道。 | diagnosis |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | 由於該 VPC 未啟用 IPv6 能力，操作被拒絕。 | diagnosis |
| 400 | OperationDenied.VPconn | The operation is not allowed because of VPconn. | Vpconn 類型不支援此操作。 | diagnosis |
| 400 | OperationDenied.VPconn | Vpconn is forbidden to create vbr for another account. | 共用專線不允許為其他帳號建立 VBR。 | diagnosis |
| 400 | OperationDenied.VpconnVBRAssociatePconn | The operation is not allowed because of VpconnVBRAssociatePconn. | 操作失敗，因為不允許 Vpconn 的 VBR 繫結 Pconn。 | diagnosis |
| 400 | OperationDenied.VpcPeerExist | The operation is not allowed because the VPC peer exists. | 指定操作被禁止，因為 VPC 存在對等連線。 | diagnosis |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because the VpcPeer exists. | 指定操作被禁止，因為 VPC 內存在 VPC 對等連線。 | diagnosis |
| 400 | OperationDenied.VpcPeerExists | The operation is not allowed because of VpcPeerExists. | 指定操作被禁止，因為 VPC 中存在 VPC 對等連線執行個體。 | diagnosis |
| 400 | OperationDenied.VpnConfiguring | The associated VPN gateway is being configured. You cannot update the attributes of the customer gateway. | 關聯的 VPN 閘道正在設定中，無法修改使用者閘道的相關設定。 | diagnosis |
| 400 | OperationDenied.VpnExist | The operation is not allowed because of existing vpn. | 不允許新建 IPv4 閘道，因為 VPC 已經存在 VPN 閘道。 | diagnosis |
| 400 | OperationDenied.VpnFinancialLocked | The associated VPN gateway is financially locked. You cannot update the attributes of the customer gateway. | 關聯的 VPN 閘道已經欠費鎖定，無法修改使用者閘道的相關設定。 | diagnosis |
| 404 | OperationFailed.AccessDeviceDisabled | Access device is disabled and can not create vbr. | 存取裝置已停用，無法建立 VBR。 | diagnosis |
| 500 | OperationFailed.AccessTunnelId | AccessTunnelId param do operation failed. | VPC NAT 產生隧道 ID 失敗，請稍後重試。 | diagnosis |
| 400 | OperationFailed.ActiveNetworkInterfaceNotFound | No active network interface is found on the attachment. | Attachment 上不存在可用的彈性網路卡。 | diagnosis |
| 400 | OperationFailed.AddIpTaskInProcessing | Operation failed because add ip to common bandwidth task in processing. | 存在 EIP 正在加入共用頻寬，不允許刪除。 | diagnosis |
| 400 | OperationFailed.AddressAlreadyAllocated | The operation is failed because of AddressAlreadyAllocated. | 指定的位址已被分配。 | diagnosis |
| 400 | OperationFailed.AddressNotInVSwitchCidr | The operation is failed because of %s. | 指定的 IP 位址不在 vSwitch 的網段內，請按 API 文件參數說明修改後重試。 | diagnosis |
| 400 | OperationFailed.AddVpcRoute | It is failed to add VPC route after this operation. | 此操作後新增 VPC 路由失敗。 | diagnosis |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc_flowlog_public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_flowlog_public 無集團上雲端商品標籤，不允許集團內部使用者購買。 | diagnosis |
| 400 | OperationFailed.AliGroupUserCanNotBuyInnerCommodity | Vpc trafficmirror public has no group cloud product label, and users within the group are not allowed to purchase. | vpc_trafficmirror_public 無集團上雲端商品標籤，不允許集團內部使用者購買。 | diagnosis |
| 400 | OperationFailed.AllocateEipSegment | Operation failed because eip segment is out of stock. | 連續 EIP 庫存不足。 | diagnosis |
| 400 | OperationFailed.AllocateNatIpPortFailed | NatIpPort allocation failed. | 前端連接埠分配失敗。 | diagnosis |
| 400 | OperationFailed.AllocateUnfamiliarIp | The operation failed because only IP addresses used within the last seven days can be allocated. | 指定 EIP 申請只允許申請 7 天內使用過的 IP。 | diagnosis |
| 400 | OperationFailed.AlreadyUsedIpContained | The specified VSwitchCidrReservationCidr cannot contain already used IP addresses. | 指定的預留網段不能包含已被使用的 IP 位址。 | diagnosis |
| 400 | OperationFailed.AnotherAssociationExist | The VPN gateway has associated with %s. | 目前 VPN 執行個體已與同類憑證繫結。 | diagnosis |
| 400 | OperationFailed.AnyPortConfig | Operation failed because any port correspondence any protocol | 操作失敗。與其他條目有衝突，存在任何連接埠或任何協定類型。 | diagnosis |
| 400 | OperationFailed.AssociationExist | The association already exists. | 由於目前資源處於繫結中操作失敗。 | diagnosis |
| 400 | OperationFailed.AssociationExist | Operation failed because the existence of an association. | 由於存在繫結操作失敗，操作失敗。 | diagnosis |
| 400 | OperationFailed.AttachmentExist | The current VPC is already attached to a DHCP options set. | 目前 VPC 已經繫結 DHCP 選項集執行個體，不允許再繫結其他執行個體。 | diagnosis |
| 400 | OperationFailed.AttachmentNotExist | The current VPC is not attahced to a DHCP options set. | 目前 VPC 沒有繫結 DHCP 選項集執行個體，不允許替換。 | diagnosis |
| 400 | OperationFailed.BandwidthExceedLimit | The operation is forbidden because of BandwidthExceedLimit. | 由於指定的 Bandwidth 超過上限，該操作被禁止。 | diagnosis |
| 400 | OperationFailed.BandwidthOrVlanIdEmpty | The specified VBR bandwidth or VlanId is empty. | 選擇的 VBR 的頻寬或者 VlanId 為空。 | diagnosis |
| 400 | OperationFailed.BandwidthPackageNotEmpty | Eip bandwidth package not empty. | 共用頻寬包中仍存在 EIP，無法刪除。 | diagnosis |
| 500 | OperationFailed.BasicInfoUncompleted | Your information is incomplete. Complete your information before the operation. | 您的基本資訊尚未完成，請先完成資訊填寫。 | diagnosis |
| 400 | OperationFailed.BasicInfoUncompleted | You have not completed your basic personal information, please complete the information and try again. | 您未完善個人基本資訊，請完善資訊後重新操作。 | diagnosis |
| 400 | OperationFailed.BgpGroupLocalAsnMustSameEachOther | VBR bgpGroup local asn must same each other. | 倒換組中 VBR 的 BGP 組 AS 號必須是相互一致的。 | diagnosis |
| 400 | OperationFailed.BgpPeerConflictWithECR | The BGP neighbor created by the previous VBR conflicts with the ECR configuration. | 目前 VBR 已經建立的 BGP 鄰居與 ECR 設定衝突，請刪除 BGP 設定後重試。 | diagnosis |
| 400 | OperationFailed.BondingVpnNotSupportBGP | The architecture does not support BGP capabilities (single tunnel bonding architecture VPN gateway). | 架構不支援 BGP 能力（單隧道 bonding 架構 VPN 閘道）。 | diagnosis |
| 400 | OperationFailed.CannotConnectOtherOwnerInstance | Can not connect with other owner VPC or CEN. | 目前資源與其它帳號 VPC 或 CEN 繫結失敗，請核對是否有相關權限後重試。 | diagnosis |
| 400 | OperationFailed.CanNotUseEipInDnat | Operation failed because the EIP cannot be used to create a forward entry. | 操作失敗，EIP 不能用於 DNAT 建立。 | diagnosis |
| 400 | OperationFailed.CenLevelNotSupport | When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP. | 當 VPN 閘道所屬 VPC 加入到的雲端企業網且開啟了路由同步時，VPN 閘道不能開啟 BGP。 | diagnosis |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | 路由 Cidr 與已存在的前綴列表路由衝突。 | diagnosis |
| 400 | OperationFailed.CidrCountExceedMaxCount | The operation is failed because of cidrCountExceedMaxCount. | 使用者傳入的 cidr 數量超過 cidrMaxCount。 | diagnosis |
| 400 | OperationFailed.CidrInUse | Operation failed because cidr is in use. | 網段正在使用中。 | diagnosis |
| 400 | OperationFailed.CidrInUse | The operation failed because the CIDR block is already in use. | 操作失敗，CIDR 位址段正在被使用。 | diagnosis |
| 400 | OperationFailed.CidrNotEnoughInVSwitch | No enough cidr to allocate in this vswitch. | 指定的 vswitch 已沒有足夠的 cidr 分配出 CidrReservation。 | diagnosis |
| 400 | OperationFailed.ClearAuthKeyForbidden | The specific auth key is not empty. | 指定金鑰不為空，無法清空金鑰。 | diagnosis |
| 400 | OperationFailed.CommodityCodeInvalid | Invalid CommodityCode. | 無效的商品代號，請修改後重試。 | diagnosis |
| 400 | OperationFailed.ConfigSessionLog | Failed to configure the NAT session log delivery rule. | NAT 工作階段日誌投遞規則設定失敗。 | diagnosis |
| 500 | OperationFailed.ConfigSessionLog | Failed to configure session log due to a temporary failure of the server. | 由於內部服務錯誤引起設定工作階段日誌失敗。 | diagnosis |
| 400 | OperationFailed.ConflictWithEntry | The CidrBlock is conflict with routeEntry. | 操作失敗，新增 CidrBlock 與路由衝突。 | diagnosis |
| 400 | OperationFailed.ContainForbiddenLabel | There is a label that prohibits ordering, please contact your distributor for processing. | 存在禁止下單的標籤，請聯絡您的分銷商處理。 | diagnosis |
| 400 | OperationFailed.CreateNatIpCidrInVpcCidrBlock | NAT CIDR blocks cannot be created in VPC CIDR blocks. | 由於在 Vpc Cidr 中建立 NatIpCidr，操作失敗。 | diagnosis |
| 400 | OperationFailed.CreateNatIpCidrNotInUserCidr | The operation is failed because of Creating NatIpCidr not in UserCidr. | 由於建立 NatIpCidr 不在 UserCidr 中，操作失敗。 | diagnosis |
| 400 | OperationFailed.CreditPayInsufficientBalance | Your account does not have enough balance. | 您的帳戶可用額度小於 0，請先儲值後再嘗試購買。 | diagnosis |
| 400 | OperationFailed.DefaultNatIp | The operation is failed because of default NatIP can not be deleted. | 操作失敗，因為無法刪除預設的 NatIP。 | diagnosis |
| 400 | OperationFailed.DefaultNatIpCidr | The operation is failed because of default NatIPCidr can not be deleted. | 操作失敗，因為無法刪除預設 NatIPCidr。 | diagnosis |
| 400 | OperationFailed.DefaultVpcExist | A default VPC already exists in the region. | 操作失敗，預設 VPC 已存在。 | diagnosis |
| 400 | OperationFailed.DefaultVpcNotExist | Operation failed because the default VPC does not exist. | 操作失敗，預設 VPC 不存在。 | diagnosis |
| 400 | OperationFailed.DefaultVSwitchExist | A default vSwitch already exists in the zone. | 目前可用區已經存在預設交換機。 | diagnosis |
| 400 | OperationFailed.DescribeCenRoute | An error occurred while querying the CEN route entry. | 查詢 cen 路由異常。 | diagnosis |
| 400 | OperationFailed.DistibuteLock | The resource is locked and cannot be operated. | 資源已經被鎖定，不允許操作。 | diagnosis |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | 操作被其他請求加鎖。 | diagnosis |
| 400 | OperationFailed.DnatInMiddleStatus | Operation failed because the status of the DNAT entry associated with the NAT gateway is abnormal. | 操作失敗，因為 NAT 閘道的 DNAT 規則狀態異常。 | diagnosis |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than 64 | dnat 單 ip 限制連接埠段映射數必須小於 64。 | diagnosis |
| 400 | OperationFailed.DnatPortRangeLimit | port range mapping count of this ip must less than limit | dnat 單 ip 連接埠段映射數超過限制值。 | diagnosis |
| 400 | OperationFailed.DnatPortRangeLimit | The maximum number of port ranges that can be specified is exceeded. | 連接埠段數量超限。 | diagnosis |
| 400 | OperationFailed.DnatQuotaExceed | Operation failed because the maximum number of forward entry is exceeded. | 操作失敗，因為 DNAT 條目數量過多。 | diagnosis |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | Operation failed because the opposite type of the router interface is invalid for ECMP configuration. | 操作失敗，該 ri 的對端類型對於 ECMP 是無效的。 | diagnosis |
| 400 | OperationFailed.EcsMetricNotEnabled | The feature is not enabled for enhanced NAT gateway. | 增強型 NAT 閘道未開啟該功能。 | diagnosis |
| 500 | OperationFailed.EcsMigrating | The operation is failed because of ECS is migrating. | 繫結操作失敗，因為 ECS 正在遷移。 | diagnosis |
| 400 | OperationFailed.EcsNetworkInterfaceQuotaNotSatisfy | ECS network interface quota is not satisfy. | ECS 彈性網路卡配額不滿足要求。 | diagnosis |
| 500 | OperationFailed.EipBindModeConflict | Eips can not bind Eni with NAT mode and MULTI_BINDED mode at the same time. | Eip 不能同時以 NAT 模式和多 EIP 網路卡可見模式繫結 ENI。 | diagnosis |
| 400 | OperationFailed.EipBoundOnInstance | The operation is failed because of eip is bounded on instance. | 由於存在 Eip 繫結在執行個體上，刪除執行個體失敗。 | diagnosis |
| 400 | OperationFailed.EipInMiddleStatus | Operation failed because the status of EIP associated with the specified NAT gateway is abnormal. | 操作失敗，因為繫結在此 NAT 閘道上的 EIP 狀態異常。 | diagnosis |
| 400 | OperationFailed.EipStatusInvalid | Operation failed because eip instance status invalid. | 操作失敗，因為 EIP 執行個體狀態無效。 | diagnosis |
| 400 | OperationFailed.Endpoint | Operation failed because the RegionId is unavailable in this endpoint. | 該地域不屬於該服務接入網域名稱管理。 | diagnosis |
| 500 | OperationFailed.EnhancedCheckInventory | The NAT gateway in the current zone is not in service, or the resource inventory is insufficient. | 目前可用區 NAT 閘道未開服，或底層資源庫存不足。 | diagnosis |
| 400 | OperationFailed.EnhancedInventoryNotEnough | The enhanced NAT gateway inventory is insufficient in the specified zone. | 目前可用區增強 NAT 閘道庫存不足。 | diagnosis |
| 400 | OperationFailed.EnhancedQuotaExceed | Operation failed because the maximum number of enhanced NAT gateways in the same VPC is exceeded. | 操作失敗，因為目前 VPC 下的增強型 NAT 閘道數量超過限制。 | diagnosis |
| 400 | OperationFailed.EnhancedQuotaExceed | Enhanced nat gateway per vpc quota is exceeded | 目前 VPC 下建立增強型 NAT 閘道配額超限。 | diagnosis |
| 400 | OperationFailed.EnhancedRegion | Operation failed because enhanced NAT gateways are not available for sale in the specified region. | 操作失敗，因為目前地域未開啟增強型 NAT 閘道售賣。 | diagnosis |
| 400 | OperationFailed.EnhancedUserIsUnAuthorized | Operation failed because the user is not authorized to create an enhanced NAT gateway. | 操作失敗，因為使用者未授權建立增強型 NAT 閘道。 | diagnosis |
| 400 | OperationFailed.EniTypeNotSupport | Operation failed because the ENI type is not supported. | 彈性輔助網路卡的類型不支援目前操作。 | diagnosis |
| 400 | OperationFailed.ExceedPurchaseLimit | You have reached the limit of purchase quantity. | 您已達到最大購買量。 | diagnosis |
| 400 | OperationFailed.ExistIPv6Used | The operation is failed because of some ipv6 in the ipv6 prefix is already in use. | 由於 IPv6 前綴中存在 IPv6 已被使用，操作失敗。 | diagnosis |
| 400 | OperationFailed.FailToGetStatus | The operation is failed because of FailToGetStatus. | 取得高速通道資源狀態資訊失敗，請核對資源資訊後再次查詢。 | diagnosis |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | 操作失敗，只有自訂路由條目才支援透過路由條目 id 或路由條目名稱進行篩選。 | diagnosis |
| 400 | OperationFailed.FilterParamUnderWrongRouteType | Operation failed because only custom type support filter by routeEntryId or routeEntryName | 操作失敗，只有自訂路由條目才支援透過路由條目 id 或路由條目名稱進行篩選。 | diagnosis |
| 400 | OperationFailed.FinancialLocked | The operation is forbidden because of financialLocked. | 操作失敗，已欠費。 | diagnosis |
| 400 | OperationFailed.ForwardEntryNotAllowSrcIpEqualDstIp | The source IP of forward entry is not allowed to equal destination IP. | DNAT 條目不允許公網 IP 位址等於私網 IP 位址。 | diagnosis |
| 500 | OperationFailed.GetEniInfo | The back-end service failed to query the NIC information. | 後端服務查詢網路卡資訊失敗。 | diagnosis |
| 400 | OperationFailed.GetNfvServiceList | The operation is failed because of get nfv serviceList failed. | 操作不允許，取得 nfv 服務列表失敗。 | diagnosis |
| 400 | OperationFailed.HavipBoundPortmap | Operation failed because Havip instance already bound portmap. | 操作失敗，因為 Havip 執行個體已繫結連接埠映射。 | diagnosis |
| 400 | OperationFailed.HcForInvalidRiType | Healthchecksourceip and healthchecktargetip is only valid for vr ri that is connected to vbr. | 健康檢查 IP 無效。 | diagnosis |
| 400 | OperationFailed.InformationIncomplete | Your information is incomplete. | 輸入資訊不完整。 | diagnosis |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | 目前 VPC 中不存在指定的執行個體。 | diagnosis |
| 400 | OperationFailed.InstanceNotExist | The ECS instance does not exist, or is not a VPC VM. | ECS 繫結 EIP 失敗，因為 ECS 執行個體不存在或不是 VPC 虛擬機。 | diagnosis |
| 400 | OperationFailed.InstanceStatusNotAllowed | The current status of the resource does not support this operation. | 目前資源的狀態不支援該操作。 | diagnosis |
| 400 | OperationFailed.InternalError | The request processing has failed due to some unknown error. | 未知錯誤，請重試操作，錯誤仍存在請提交工單處理。 | diagnosis |
| 400 | OperationFailed.InternetBandwidthAlreadyExisted | The operation is failed because of %s. | 您目前操作的 IPv6 執行個體已開通公網頻寬，請勿重複開通。 | diagnosis |
| 400 | OperationFailed.InternetBandwidthNonExist | The operation is forbidden because of InternetBandwidthNonExist. | 由於指定的頻寬執行個體不存在，該操作被禁止。 | diagnosis |
| 400 | OperationFailed.InternetBandwidthUnstable | The operation is forbidden because of InternetBandwidthUnstable. | 由於頻寬執行個體處於非穩態，該操作被禁止。 | diagnosis |
| 400 | OperationFailed.InvalidCidrBlock | Operation failed because the specified network block is invalid. | 網段不合法。 | diagnosis |
| 400 | OperationFailed.InvalidEcGrant | The VBR have no grant to create EC. | VBR 執行個體未獲得 VPC 執行個體授權，請授權後重試。 | diagnosis |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because Ecmp routeEntry has more than one ri entry and can only support one non-ri entry. | 建立路由條目失敗，因為 ECMP（Equal-Cost Multipath Routing）路由只支援一個非 RI（non-ri）類型作為下一跳。 | diagnosis |
| 400 | OperationFailed.InvalidNextHopType | Operation failed because the specified nexthopType is invalid. | 操作失敗，下一跳類型非法。 | diagnosis |
| 400 | OperationFailed.InvalidStatus | Route entry is not allowed to operate in current status. | 目前狀態下禁止操作該路由條目。 | diagnosis |
| 400 | OperationFailed.IpIsLocked | The operation is failed because of ip is locked. | 申請失敗，IP 已經被鎖定。 | diagnosis |
| 400 | OperationFailed.IpPrefixConflict | The operation failed due to the IP prefix of the ENI. | 目前操作與彈性網路卡的 IP Prefix 衝突。 | diagnosis |
| 400 | OperationFailed.IpPrefixMustInVSwitchCidrReservation | The specified ip prefix must in reserved segment the VSwitch. | 指定的前綴網段必須位於交換機預留網段內。 | diagnosis |
| 400 | OperationFailed.IPsecServerExist | An IPsec server already exists in the VPN gateway. | VPN 閘道中已經存在一個 IPsec 服務端。 | diagnosis |
| 400 | OperationFailed.Ipv4GatewayNotOpenedInVpc | The operation is failed because Ipv4Gateway is not opened in Vpc. | EIP 繫結 IP 失敗，因為該 VPC 未開啟 IPv4 閘道。 | diagnosis |
| 400 | OperationFailed.Ipv4GatewayUsedByEipBindIpAddress | Failed to delete the IPv4 gateway because the EIP associated with a private IP address requires the IPv4 gateway to implement outbound Internet access. | 存在 EIP 繫結私網 IP 出公網的場景，此功能的實現依賴 IPv4 閘道的存在，故無法刪除 IPv4 閘道。 | diagnosis |
| 400 | OperationFailed.Ipv6AddressAlreadyAllocated | The operation is failed because of Ipv6AddressAlreadyAllocated. | 指定的位址已被分配。 | diagnosis |
| 400 | OperationFailed.IPv6AddressAlreadyAllocated | The operation is failed because of the ipv6 address specified was allocated. | 指定的 IPv6 位址已被分配。 | diagnosis |
| 400 | OperationFailed.Ipv6AlreadyEnabled | Operation failed because the IPv6 is enabled already. | 操作失敗，已開啟 IPv6。 | diagnosis |
| 400 | OperationFailed.Ipv6BandwidthExceedLimit | Operation failed because the IPv6 bandwidth is beyond the limits of IPv6Gateway spec to modify. | 操作失敗，IPv6 執行個體的頻寬超出了待修改閘道規格的最大頻寬限制。 | diagnosis |
| 400 | OperationFailed.Ipv6CidrBlockExisted | Operation failed because the specified IPv6 CIDR block is used already. | 操作失敗，該 IPv6 位址段已被使用。 | diagnosis |
| 400 | OperationFailed.Ipv6CidrBlockOverLapped | The input IPv6 CIDR block overlaps with the existing ones. | 輸入的 IPv6 網段和現有的網段重疊。 | diagnosis |
| 400 | OperationFailed.Ipv6CidrBlockUsed | Operation failed because the specified IPv6 CIDR block is used already. | 操作失敗，該 IPv6 位址段已被使用。 | diagnosis |
| 400 | OperationFailed.IPv6CidrNotReserved | The IPv6 CIDR block is not reserved. | 操作失敗，未預留該 IPv6 位址段。 | diagnosis |
| 400 | OperationFailed.IPv6Disabled | Operation failed because IPv6 is not enabled for the vSwitch. | 指定操作失敗，因為 IPv6 功能未開啟。 | diagnosis |
| 400 | OperationFailed.Ipv6EgressRuleExisted | An egress-only rule already exists for the IPv6 address. | 該 IPv6 執行個體已存在僅主動出規則。 | diagnosis |
| 400 | OperationFailed.Ipv6Gateway | The operation is failed because of ipv6Gateway is in use. | 操作失敗，因為 IPv6 閘道仍在使用中。 | diagnosis |
| 400 | OperationFailed.Ipv6GatewayDisMatchIpv6Address | The operation is failed because of %s. | 您所指定的 Ipv6Address 和 Ipv6Gateway 不在同一 VPC 內，請確認您的輸入是否正確。 | diagnosis |
| 400 | OperationFailed.Ipv6GatewayInUse | The IPv6 gateway is in use. | 無法修改 VPC 屬性，因為 IPv6 閘道仍在使用中。 | diagnosis |
| 400 | OperationFailed.Ipv6GatewayNotExist | The operation is failed because of %s. | 您目前操作的 IPv6 位址所在的 VPC 不存在 Ipv6Gateway 執行個體，請建立 Ipv6Gateway 再進行該操作。 | diagnosis |
| 400 | OperationFailed.Ipv6InstanceExist | Operation failed because vswitch has ipv6 instance. | 交換機中存在 IPv6 執行個體。 | diagnosis |
| 400 | OperationFailed.Ipv6RouteEntryUsing | VPC exist IPv6 Route Entry, cannot disable IPv6. | VPC 存在 IPv6 路由，禁止關閉 IPv6。 | diagnosis |
| 400 | OperationFailed.IpV6VSwitchInuse | Operation failed because some vswitch ipv6 is in use. | IPv6 交換機仍在使用。 | diagnosis |
| 400 | OperationFailed.LastTokenProcessing | A token request is being processed. Try again later. | 正在處理上一條權杖請求，請您稍後再試。 | diagnosis |
| 400 | OperationFailed.LogDeliveryIsUnAuthorized | Operation failed because the user is not authorized to deliver NAT session log. | 操作失敗，因為您未授權 NAT 工作階段日誌投遞權限。 | diagnosis |
| 400 | OperationFailed.MissCertificate | The VPN gateway has not associated any certificates. | VPN 閘道沒有繫結任何憑證。 | diagnosis |
| 400 | OperationFailed.MissCertificate | The VPN connecton has not associated any certificates. | 目前 VPN 連線沒有關聯任何憑證。 | diagnosis |
| 400 | OperationFailed.ModifyVpcDnsHostname | Operation failed because DnsHostName resource is in transient state, please try again later. | DNS 網域名稱資源處於非穩態，請稍後重試。 | diagnosis |
| 400 | OperationFailed.NatArchitectrueNotMatch | The operation is not supported because the NAT instance architecture does not match. | 操作不支援，NAT 執行個體架構不匹配。 | diagnosis |
| 400 | OperationFailed.NatGatewayNotExist | The specified NatGateway does not exist. | 操作失敗，NAT 閘道不存在。 | diagnosis |
| 400 | OperationFailed.NatGwBandwidthQuotaExceed | The total bandwidth of the EIP bound to the NAT gateway exceeds the quota. | 操作失敗，因為繫結在 NAT 閘道上的 EIP 的頻寬總和超過限制。 | diagnosis |
| 400 | OperationFailed.NatGwBindWithBandwidthPackage | Operation failed because the NAT gateway is bound to bandwidth packages. | 操作失敗，因為 NAT 閘道執行個體繫結了 NAT 頻寬包。 | diagnosis |
| 400 | OperationFailed.NatGwRouteInMiddleStatus | Operation failed because the status of the route entry associated with the NAT gateway is abnormal. | 操作失敗，因為 NAT 閘道相關的路由條目狀態異常。 | diagnosis |
| 400 | OperationFailed.NatTypeInvalid | Only enhanced NAT gateway supports the operation. | 只有增強型 NAT 閘道支援當前操作。 | diagnosis |
| 400 | OperationFailed.NatTypeNotEnhanced | Operation failed because the specified NAT gateway type is not enhanced. | 操作失敗，因為指定的 NAT 閘道類型不是增強型。 | diagnosis |
| 400 | OperationFailed.NoAvailableAmount | The available amount of your account is less than 0, please recharge before attempting to purchase. | 您的帳戶可用額度小於 0，請先儲值後再嘗試購買。 | diagnosis |
| 400 | OperationFailed.NoAvailableResource | The Zone have no available resource. | 區域沒有可用資源。 | diagnosis |
| 400 | OperationFailed.NoInternetBandwidth | Operation failed because the ipv6 instance has no internet bandwidth. | 該操作不受支援，因為 IPv6 執行個體沒有公網頻寬。 | diagnosis |
| 400 | OperationFailed.NoNameAuthentication | You have not passed the real name authentication and do not meet the purchase conditions. Please log in to the user center for real-name authentication. | 您還未通過實名認證，不符合購買條件。請登入使用者中心進行實名認證。 | diagnosis |
| 400 | OperationFailed.NoPaymentMethod | No payment method is specified for your account. | 帳戶中沒有有效的支付方式。 | diagnosis |
| 400 | OperationFailed.NoPermission | You are not authorized to perform the operation. | 您沒有該功能的操作權限。 | diagnosis |
| 400 | OperationFailed.NoRamPermission | Vpn Service has no permission to operate your IDaaS instances. | VPN 服務沒有權限操作您的 IDaaS 執行個體。 | diagnosis |
| 400 | OperationFailed.NormalInventoryNotEnough | Operation failed because the inventory of standard NAT gateway is insufficient. | 操作失敗，因為普通型 NAT 閘道的庫存不足。 | diagnosis |
| 500 | OperationFailed.NormalInventoryNotEnough | Standard NAT gateways are no longer offered. You can create enhanced NAT gateways and set the correct natType. | 普通型 NAT 閘道已不支援建立，請建立增強型 NAT 閘道並確保正確設定 NatType 參數。 | diagnosis |
| 400 | OperationFailed.NotConsistentWithVpconn | VBR bandwidth is not consistent with vpconn | VBR 頻寬值與所屬共用專線頻寬值不一致。 | diagnosis |
| 400 | OperationFailed.NotConsistentWithVpconn | The operation is failed because of NotConsistentWithVpconn. | 不支援修改在共用連接埠上建立的虛擬路由器的頻寬規格。 | diagnosis |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is failed because of association not exist. | 操作失敗，PrefixList 不存在該引用關係。 | diagnosis |
| 400 | OperationFailed.NotExistAssociateRelation | The operation is not failed because of not exist this associate relation. | 路由表和閘道解繫操作失敗，因為不存在繫結關係。 | diagnosis |
| 400 | OperationFailed.NotSupportBizType | The specified instance type does not support the operation. | 操作失敗，因為指定的執行個體類型不支援此操作。 | diagnosis |
| 400 | OperationFailed.NotSupportIPV6 | The specified next hop does not support IPv6. | 指定的下一跳不支援 IPv6 功能。 | diagnosis |
| 400 | OperationFailed.NotSupportIPv6 | Router interface not support IPv6. | 路由介面不支援 IPv6。 | diagnosis |
| 400 | OperationFailed.OpenCdtServiceFirst | The operation is failed because of %s. | 您當前指定的計費類型需開通 CDT 計費，請開通 CDT 後重試。 | diagnosis |
| 400 | OperationFailed.OperateShareResource | This is not allowed to operate shared prefixList. | 無法操作共用 PrefixList。 | diagnosis |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | 路由下一跳執行個體處於維運鎖定狀態，無法操作。 | diagnosis |
| 400 | OperationFailed.OperationLocked | Operation failed because OperationLocked. | 操作失敗，因為執行個體已經被維運鎖定。 | diagnosis |
| 400 | OperationFailed.PconnAllocateVlan0 | Vlan 0 Vbr cannot share the physical connection with another Vbr. | 實體專線上 Vlan 0 不能和其他 VBR 共存。 | diagnosis |
| 400 | OperationFailed.PconnExistVlan0Vbr | The physical connection has VLAN 0 VBR. You cannot create another VBR. | 專線上已經存在 VLAN 0 VBR，不允許建立其它 VBR。 | diagnosis |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation is failed because of PconnTrafficNotEnable. | 操作失敗，因為出方向流量未開通。 | diagnosis |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation failed because Outbound Data Transfer service is not activated. | 操作失敗，因為未開通出雲端流量服務。 | diagnosis |
| 400 | OperationFailed.PeerAsnCannotEqualsLocalAsn | Peer ASN is illegal, peer ASN cannot equals to local ASN. | 新增 BGPGroup 時對端自治系統編號不能與本端自治系統編號相同，請核對參數後重試。 | diagnosis |
| 400 | OperationFailed.PhysicalConnectionFinancialLocked | Update failed, the physical connection is financial locked. | 共用連接埠為欠費鎖定狀態，無法修改 VLAN。 | diagnosis |
| 400 | OperationFailed.PhysicalConnectionTerminated | Update failed, the physical connection is terminated. | 共用連接埠為已終止狀態，無法修改 VLAN。 | diagnosis |
| 400 | OperationFailed.PrivateIpAddressNotExist | The operation failed because the PrivateIpAddress is not found. | 您傳入的私網 IP 位址不存在。 | diagnosis |
| 400 | OperationFailed.PrivateLinkMode | The NAT gateway is not support to change PrivateLinkMode. | 當前 NAT 閘道不支援修改 PrivateLinkMode。 | diagnosis |
| 500 | OperationFailed.QueryAccountInfo | Query account info failed when create order. | 下單時查詢帳號資訊失敗。 | diagnosis |
| 400 | OperationFailed.QueryAttachmentInfo | Failed to query attachment information. | 查詢 Attachment 資訊失敗。 | diagnosis |
| 400 | OperationFailed.QueryCenEntry | Operation is denied because getting CEN route entry has failed. | 由於暫時無法取得雲端企業網路由導致查詢失敗。 | diagnosis |
| 400 | OperationFailed.QueryCenIpv6Status | Failed to query the IPv6 status of the specified VPC in CEN. | 查詢 CEN 中該 VPC 的 IPv6 狀態失敗。 | diagnosis |
| 400 | OperationFailed.QueryNetworkInterfaceInfo | Failed to query network interface information. | 查詢網路卡資訊失敗。 | diagnosis |
| 400 | OperationFailed.QueryOrderError | Failed to query order, error calling trade application. | 查詢訂單失敗，呼叫 trade 應用出錯。 | diagnosis |
| 400 | OperationFailed.QueryPrice | Query price failed when create order. | 建立訂單時查詢價格失敗。 | diagnosis |
| 500 | OperationFailed.QuerySpInfo | query resource by sp error | 查詢執行個體訂購資訊失敗。 | diagnosis |
| 400 | OperationFailed.QuotaExceedPerTimeWindow | The maximum number of scheduled migration within the specified time window is exceeded. | 操作失敗因為該時間窗口的預約達到上限。 | diagnosis |
| 400 | OperationFailed.QuotaNotEnough | Your quota is insufficient. Please contact your channel partner to increase your quota | 您目前 quota 配額不足，請您可以聯繫渠道夥伴為您增加額度。 | diagnosis |
| 400 | OperationFailed.QuotaNotEnough | Your current quota is insufficient, please contact your channel partner to increase the quota for you. | 您目前 quota 配額不足，請您可以聯繫渠道夥伴為您增加額度。 | diagnosis |
| 400 | OperationFailed.RegionDissolved | The operation failed because the region is dissolved. | 客戶您好，阿里雲端計劃對目前地域進行最佳化調整，該區域雲端服務將停止營運，為確保您的業務連續性及資料遷移工作的平穩過渡，您目前無法操作新購等類型的訂單，感謝理解與支援。 | diagnosis |
| 400 | OperationFailed.RegionNotSupport | The specified region does not support the feature. | 目前地域未支援該功能。 | diagnosis |
| 400 | OperationFailed.ReservedCidr | OperationFailed.ReservedCidr | 您指定預留的 Cidr 不滿足預留條件。 | diagnosis |
| 400 | OperationFailed.ResourceInBinding | The operation is failed because of the resource is in binding. | 操作失敗，原因是資源正處於綁定狀態。 | diagnosis |
| 400 | OperationFailed.ResourceIsShared | The operation is failed because of PublicIpAddressPool is shared with other users. | 公網 IP 位址池已經共用給其他使用者，不允許刪除。 | diagnosis |
| 500 | OperationFailed.ResourceNotEnough | Insufficient resources. | 您申請的資源不足，如仍需申請，請提工單處理。 | diagnosis |
| 400 | OperationFailed.ResourceNotEnough | The resources you have applied for are insufficient. | 您申請的資源不足，如仍需申請，請提工單處理。 | diagnosis |
| 400 | OperationFailed.ResourceUidNotExist | The operation is failed because of the resource uid does not exist. | 由於資源 uid 不存在，操作失敗。 | diagnosis |
| 400 | OperationFailed.RiskControl | Risk control check failed. | 我們偵測到您的付款方式存在安全風險。請透過電子郵件或主控台訊息中的連結繼續驗證，並在驗證後重新提交訂單。 | diagnosis |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to another VPN on the same network block. | 在 VPC 路由表中同一網段上已經存在一條指向另一個 VPN 閘道的路由。 | diagnosis |
| 400 | OperationFailed.RouteConflict | Operation failed because there is already a route in VPC route table to a non-RI and non-VPN next hop on the same network block. | 在 VPC 路由表中同一網段上已經存在一條指向 RI、VPN 閘道之外其他資源的路由。 | diagnosis |
| 404 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | 操作與已存在的路由衝突，操作失敗。 | diagnosis |
| 400 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the route to create conflicts with the client IP pool of the IPsec server. | 路由的目標網段和 IPsec 伺服端的用戶端網段衝突。 | diagnosis |
| 500 | OperationFailed.RouteConflictWithIPsecServer | Operation failed because the specified route conflicts with IPsec server. | 路由設定與 IPsec 伺服端衝突。 | diagnosis |
| 400 | OperationFailed.RouteEntryUnstable | The operation is failed because of route entry related to it is unstable, please try later. | 由於執行個體關聯的路由條目處於非穩態，請稍後重試。 | diagnosis |
| 400 | OperationFailed.SaleValidate | Validate sale condition with subArticle failed. | 使用子項目驗證銷售條件失敗。 | diagnosis |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | Operation failed because the quota for active route entries in the scope has been exceeded. | 操作失敗，因為超出了活動路由條目的配額。 | diagnosis |
| 400 | OperationFailed.ScopeActiveRouteEntryType | Operation failed because the type of the active route entry is not supported. | 操作失敗，不支援此活動路由條目的類型。 | diagnosis |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | Operation failed because the quota for standby route entries in the scope has been exceeded. | 操作失敗，因為超出了備用路由條目的配額。 | diagnosis |
| 404 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | 託管執行個體不允許進行該操作。 | diagnosis |
| 400 | OperationFailed.SnatInMiddleStatus | Operation failed because the status of the SNAT entry of the specified NAT gateway is abnormal. | 操作失敗因為指定的 NAT 閘道的 SNAT 條目狀態異常。 | diagnosis |
| 400 | OperationFailed.SnatIpsTooMany | The maximum number of IP addresses is exceeded in the SNAT pool. | snat pool 中的 ip 過多。 | diagnosis |
| 400 | OperationFailed.SnatQuotaExceed | Operation failed because the maximum number of SNAT entry is exceeded. | 操作失敗因為 SNAT 條目數量過多。 | diagnosis |
| 400 | OperationFailed.SslNotSupport | Enable ssl vpn with private networkType is unsupported. | 私網類型 VPN 閘道不支援開啟 SSL 功能。 | diagnosis |
| 400 | OperationFailed.StaleBGPRoutes | BGP routes are still there and automatic route propagation cannot be disabled. | BGP 路由有殘留，無法關閉路由自動傳播。 | diagnosis |
| 400 | OperationFailed.SyncOrderToSub | SyncOrderToSub error. | 操作失敗。 | diagnosis |
| 500 | OperationFailed.SyncTradeResource | Resource transaction information synchronization failed | 資源的交易資訊同步失敗。 | diagnosis |
| 400 | OperationFailed.SystemBusy | Operation failed because system is busy. | 系統繁忙，請稍後重試。 | diagnosis |
| 400 | OperationFailed.SystemReservedIpContained | The specified VSwitchCidrReservationCidr cannot contain system reserved IP addresses. | 指定的 VSwitchCidrReservationCidr 不能包含系統預留 IP 位址。 | diagnosis |
| 400 | OperationFailed.TargetUserPconnTrafficNotEnable | The operation failed because of TargetUserPconnTrafficNotEnable. | 目標使用者沒有開通出雲端流量，因此操作失敗。 | diagnosis |
| 400 | OperationFailed.TokenInvalid | Create order failed, because the token is invalid | 建立訂單失敗，因為 token 無效。 | diagnosis |
| 400 | OperationFailed.UnpaidBillsExist | The account has unpaid bills. Please pay your overdue bill first. | 此帳戶有未支付的訂單。 | diagnosis |
| 400 | OperationFailed.UpgradeCdtServiceFirst | The operation is failed because of cdt is not upgraded. | 您目前指定購買的執行個體類型需升級 CDT 計費，請升級 CDT 後重試。 | diagnosis |
| 400 | OperationFailed.UsedInRouteEntryNextHop | The VPC also has a static route pointing to the ECR, and it is not allowed to disassociate the ECR. | VPC 還有靜態路由指向 ECR，不允許解除關聯 ECR。 | diagnosis |
| 400 | OperationFailed.VbrBandWidthMust0InVlan0Vbr | The operation is failed because of VbrBandWidthMust0InVlan0Vbr. | 操作失敗，不允許配置限速。 | diagnosis |
| 400 | OperationFailed.VbrBindedPconn | The operation failed because of VbrBindedPconn. | 操作失敗，因為 Vbr 綁定了 Pconn。 | diagnosis |
| 400 | OperationFailed.VbrBindedPconn | The operation is failed because of VbrBindedPconn. | VBR 已綁定 PCONN。 | diagnosis |
| 400 | OperationFailed.VbrLocked | The VBR is locked. | 邊界路由器已被鎖定，請稍後重試。 | diagnosis |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The operation failed because of VirtualPhysicalConnectionExistVBR. | VirtualPhysicalConnection 已經存在 VBR。 | diagnosis |
| 400 | OperationFailed.VirtualPhysicalConnectionExistVBR | The virtual physical connect has already created another VBR. | 共享專線已建立一個 VBR，無法繼續建立。 | diagnosis |
| 400 | OperationFailed.Vlan0VbrUnSharePconn | VLAN 0 VBR cannot share the physical connection with another VBR. | 專線已有其它 VLAN 0 VBR，不允許在此專線建立 VLAN 0 VBR。 | diagnosis |
| OperationFailed.VlanIdAlreadyInUse | The specifed vlanId has been used. | 該 VLAN 已經被佔用。 | diagnosis | |
| 400 | OperationFailed.VlanIdInUse | Operation failed because vlanId is in use. | vlanId 已經被使用。 | diagnosis |
| 400 | OperationFailed.VpcIpv6Disabled | Operation failed because the VPC has not enabled IPv6. | 當前操作不支援因為 VPC 尚未開啟 IPv6。 | diagnosis |
| 400 | OperationFailed.VpcNotExist | The specified VPC does not exist. | 指定的 VPC 不存在。 | diagnosis |
| 400 | OperationFailed.VpcNotExist | The operation is failed because of vpc is not found. | 操作失敗，未找到 vpc。 | diagnosis |
| 400 | OperationFailed.Vpconn | The operation is failed because of Vpconn. | 無法操作 Vpconn。 | diagnosis |
| 400 | OperationFailed.VpconnAttached | Cannot terminate physical connection when vpconn are still attached. | 共享連接埠依然存在，無法終止此實體連接埠。 | diagnosis |
| 400 | OperationFailed.VPconnCreated | The operation failed because VPconn is already created. | Vpconn 已經建立，不需要重複建立。 | diagnosis |
| 400 | OperationFailed.VPconnCreated | The operation is failed because of VPconnCreated. | 無法建立 VPconn。 | diagnosis |
| 400 | OperationFailed.VpcRoutePropagationDisable | The VPC system routing table does not enable the acceptance of propagated routes. | VPC 系統路由表未開啟接受傳播路由。 | diagnosis |
| 400 | OperationFailed.VpcRoutePublishEnabledInECR | VPC supports only one dynamic route learning source at most. Please remove the VPC from ECR. | VPC 最多只支援一個動態路由學習來源，請將 VPC 從 ECR 中移除。 | diagnosis |
| 400 | OperationFailed.VpcRoutePublishEnabledInTR | A VPC supports at most one dynamic route learning source. In the forwarding router, disable route synchronization for the VPC. | VPC 最多只支援一個動態路由學習來源，請在轉發路由器中關閉對該 VPC 的路由同步。 | diagnosis |
| 400 | OperationFailed.VpnConnectionExist | Auto propagate cannot be closed when VPN connections with BGP enabled exist. | 當存在已開啟 BGP 的 VPN 連線時，路由自動傳播無法關閉。 | diagnosis |
| 400 | OperationFailed.VRouterNotExist | Operation failed because the VRouter does not exist. | 操作失敗因為虛擬路由器不存在。 | diagnosis |
| 400 | OperationFailed.VswBindedAcl | The operation failed because a network ACL is associated with the specified VSwitch. | 操作失敗因為指定的 vSwitch 綁定了網路 ACL。 | diagnosis |
| 400 | OperationFailed.VswBindedRouteTable | The operation failed because a custom route table that contains subnet routes is associated with the specified VSwitch. | 操作失敗因為 vSwitch 綁定了子網路由表。 | diagnosis |
| 400 | OperationFailed.VswHasAcl | Operation failed because the specified VSwitch is associated with a network ACL. | 操作失敗因為指定的虛擬交換機關聯了網路 ACL。 | diagnosis |
| 400 | OperationFailed.VswHasRouteTable | Operation failed because the specified VSwitch is associated with a route table. | 操作失敗因為指定的虛擬交換機關聯了子網路由表。 | diagnosis |
| 400 | OperationFailed.VSwitchCidrReservationCidr | The specified VSwitchCidrReservationCidr conflicts with existed cidr reservation or vswitch cidr. | 指定的 VSwitchCidrReservationCidr 與已有的 VSwitchCidrReservation 網段衝突。 | diagnosis |
| 400 | OperationFailed.VSwitchIpv6Disabled | The operation is failed because of %s. | 指定的 VSwitch 未開通 IPv6，請開通 IPv6 後再進行該操作。 | diagnosis |
| 400 | OperationFailed.VSwitchNoAvailableIp | Operation failed because the number of available IP addresses of the specified VSwitch is insufficient. | 操作失敗因為虛擬交換機的可用 IP 數量不足。 | diagnosis |
| 400 | OperationFailed.VSwitchNotFound | The specified vSwitch does not exist. | 當前虛擬交換機未找到。 | diagnosis |
| 400 | OperationFailed.VSwitchNotInVpc | The specified VSwitch and NAT gateway must be in the same VPC. | VSwitch 和 NAT 閘道須屬於同一個 VPC。 | diagnosis |
| 400 | OperationFailed.VSwitchStatusError | The vSwitch is creating . | 交換機正在建立中。 | diagnosis |
| 400 | OperationFailed.VswNotBelongToVpc | Operation failed because the specified VSwitch is not bound to the same VPC with NAT gateway. | 操作失敗，因為交換機和 NAT 閘道不屬於同一個 VPC。 | diagnosis |
| 400 | OperationFailed.VswNotExist | The specified VSwitch does not exist. | 指定的交換機不存在。 | diagnosis |
| 400 | OperationFailed.ZoneIdInconsistent | Operation failed because the ZoneId is inconsistent. | 當前操作不支援因為可用區 Id 不匹配。 | diagnosis |
| 400 | OperationUnsupport | Operation is unsupport, not in vbr support custom local asn white list. | 操作不支援。 | diagnosis |
| 400 | OperationUnsupported.AccessDevice | The AccessDevice is not supported. | 操作不支援存取 AccessDevice。 | diagnosis |
| 400 | OperationUnsupported.action | This action is not support. | 此操作不支援。 | diagnosis |
| 400 | OperationUnsupported.AdvancedFeature | Advanced features of the vpc is unsupported. | 不支援該進階特性。 | diagnosis |
| 400 | OperationUnsupported.AllocateCountTooMuch | %s is unsupported. | 指定分配的 IP 位址數量大於上限，請按 API 文件參數說明修改後重試。 | diagnosis |
| 400 | OperationUnsupported.BindMultipleType | You cannot bind HaVip to multiple instance types. | 不允許同時繫結 ECS 執行個體和網路卡。 | diagnosis |
| 400 | OperationUnsupported.BindOnFreeNetworkInterface | The network interface must be attached to an ECS instance. | 網路卡必須繫結在 ECS 執行個體上。 | diagnosis |
| 400 | OperationUnsupported.BindOnMultipleVswitch | The bound instance and HaVip must be on the same vSwitch. | 繫結的執行個體和 HaVip 必須位於同一台交換機上。 | diagnosis |
| 400 | OperationUnsupported.BindOnSameEcs | You cannot bind two network interfaces on the same ECS instance. | 不允許繫結同一台 ECS 上的兩張網路卡。 | diagnosis |
| 400 | OperationUnsupported.BondingNetworkInterface | The specified traffic mirror source is bonding eni without slave. | 當前操作不支援無 slave 的 bonding 網路卡。 | diagnosis |
| 400 | OperationUnsupported.CenIpv6Enabled | The IPv6 feature is enabled in CEN. | IPv6 功能在 CEN 中已被開啟。 | diagnosis |
| 400 | OperationUnsupported.CidrConflict | The specified CIDR block conflicts with an existing SNAT entry. | 您指定的 CIDR 的網段與已有的 SNAT 條目衝突。 | diagnosis |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | 路由條目中指定的目標 IPv6 網段與 vSwitch 網段重疊。 | diagnosis |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment。 | 您在路由條目中指定的目的 IPv6 位址包含在 vSwitch 交換機網段內。 | diagnosis |
| 400 | OperationUnsupported.DhcpLeaseTime | The DhcpOptionsSet of this region does not support custom LeaseTime. | 該地域的 DhcpOptionsSet 未支援自訂 LeaseTime。 | diagnosis |
| 400 | OperationUnsupported.DhcpOptionsSet | The DHCP options set feature in this region is not supported. | 當前區域暫時不支援 DHCP 選項集功能。 | diagnosis |
| 400 | OperationUnsupported.DisableIpv6 | The operation is unsupported because IPv6 is not enabled. | 當前操作不支援因為尚未開啟 IPv6 功能。 | diagnosis |
| 400 | OperationUnsupported.EgressOnlyRuleOnFreeIpv6Instance | Creating ipv6 egress only rule on ipv6 instance that not associated with any resource is unsupported. | 不支援在未繫結資源的 IPv6 執行個體上建立僅主動出規則。 | diagnosis |
| 400 | OperationUnsupported.EgressRuleInDefaultSpec | Egress-only rule is not supported. Please update the spec of IPv6 Gateway to Medium or Large. | 免費版 IPv6 閘道不支援建立僅主動出規則，請將 IPv6 閘道升級為企業版或企業增強版。 | diagnosis |
| 400 | OperationUnsupported.EgressRuleVSwitch | The specified VSwitch is not supported to create egress-only rule. | 指定地域尚未支援交換粒度的僅主動出規則。 | diagnosis |
| 400 | OperationUnsupported.EipInBinding | Create snat entry with eip in associating status is unsupported. | 建立 SNAT 不可以使用繫結中的 EIP。 | diagnosis |
| 400 | OperationUnsupported.EipNatBWPCheck | The EIP is not associated with a NAT service plan. | 當前 EIP 不屬於 NAT 頻寬包。 | diagnosis |
| 400 | OperationUnsupported.EipNatGWCheck | Operation is not supported because the relation check of EIP and NAT gateway has failed. | 操作不支援因為 EIP 和 NAT 閘道關係校驗失敗。 | diagnosis |
| 400 | OperationUnsupported.EnableBgp | Current version of the VPN does not support enable BGP. | 當前版本的 VPN 不支援開啟 BGP。 | diagnosis |
| 400 | OperationUnsupported.EnableBgp | Current region does not support enable BGP. | 當前地域不支援開啟 BGP。 | diagnosis |
| 400 | OperationUnsupported.EnhancedCURegion | Pay-by-CU Enhanced NAT Gateway is not supported in this region. | 當前地域不支援 CU 計費的增強型 NAT 閘道。 | diagnosis |
| 400 | OperationUnsupported.EnhancedRegion | Enhanced NAT Gateway is not supported in this region. | 當前地域不支援增強型 NAT 閘道。 | diagnosis |
| 400 | OperationUnsupported.FinancialLocked | The operation is forbidden because of financialLocked. | 由於 financialLocked，該操作被禁止。 | diagnosis |
| 400 | OperationUnsupported.ForwardEntry | Duplicated destination ip port is unsupported. | 不支援重複的目標 IP 連接埠。 | diagnosis |
| 400 | OperationUnsupported.FreeIpv6Feature | Free IPv6 feature in this region is unsupported. | 當前地域不支援分配游離態 IPv6 位址執行個體。 | diagnosis |
| 400 | OperationUnsupported.FreeIpv6PrefixFeature | Free IPv6 prefix feature in this region is unsupported. | Ipv6Prefix 特性在該地域不支援。 | diagnosis |
| 400 | OperationUnsupported.FreePrivateIpv6 | This operation does not support free private IPv6 addresses. | 當前不支援分配游離態私網 IPv6 位址。 | diagnosis |
| 400 | OperationUnsupported.HavipBindType | You cannot bind HAVIP to network interface in the specified region. | 您所在的地域不支援繫結網路卡。 | diagnosis |
| 400 | OperationUnsupported.IpNotInCbwp | The specified eip not exist in the commonBandwidthPackage. | 頻寬包中不存在該 EIP。 | diagnosis |
| 400 | OperationUnsupported.IpsecPfs | The specified IPsec Pfs is unsupported. | 不支援指定的 IPsec Pfs。 | diagnosis |
| 400 | OperationUnsupported.IPsecServer | The current version of the VPN gateway does not support IPsec server. | 當前 VPN 閘道版本不支援 IPsec 伺服端。 | diagnosis |
| 400 | OperationUnsupported.IpType | The EIP type does not support the operation. | 該 EIP 類型不允許新增。 | diagnosis |
| 400 | OperationUnsupported.Ipv6CidrBlock | The specified IPv6 CIDR block is unsupported. | 不支援此 IPv6CidrBlock。 | diagnosis |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | The EcmpRouteEntry is not supported for IPv6. | IPv6 不支援 Ecmp 路由。 | diagnosis |
| 400 | OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterface | You cannot create IPv6 route entries on a primary network interface. | 不允許建立下一跳為主網路卡的 IPv6 路由。 | diagnosis |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported in the region. | 當前地域不支援 IPv6 特性。 | diagnosis |
| 400 | OperationUnsupported.Ipv6Feature | The IPv6 feature is not supported. | 當前操作不支援 IPv6 特性。 | diagnosis |
| 400 | OperationUnsupported.IPV6ForThisRegion | This Region do not support IPV6. | 地域不支援 IPv6。 | diagnosis |
| 400 | OperationUnsupported.Ipv6ForVBR | IPv6 route entry is not supported for VirtualBorderRouter. | VBR 不支援 IPv6 路由。 | diagnosis |
| 400 | OperationUnsupported.IPv6ULA | The ULA IPv6 CIDR type is unsupported. | 當前操作不支援 ULA 位址。 | diagnosis |
| 400 | OperationUnsupported.ModifyBandwidth | You cannot modify the bandwidth of the VBR in sale. | 售賣 VBR 不允許修改成別的頻寬。 | diagnosis |
| 400 | OperationUnsupported.ModifyBandwidth | Modify Sale VirtualBorderRouter Bandwidth Unsupported. | 修改的頻寬參數不支援儲存。 | diagnosis |
| 400 | OperationUnsupported.MultipleIpv6Address | Operation unsupported because specific route next hop instance has multiple IPv6 address. | 操作不支援，因為指定的路由下一跳執行個體繫結了多個 IPv6 位址。 | diagnosis |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | 不允許指定繫結了多個 IPV6 位址的下一跳。 | diagnosis |
| 400 | OperationUnsupported.NatConvert | The NAT gateway conversion function is not supported. | NAT 閘道類型轉換功能未支援。 | diagnosis |
| 400 | OperationUnsupported.NATGWBONDINGENI | Operation is unsupported because the specified network interface is created with enhanced NAT gateway. | 操作失敗因為繫結的 ENI 執行個體是增強型 NAT 閘道建立產生。 | diagnosis |
| 400 | OperationUnsupported.NormalInventoryNotEnough | Operation is unsupported because the inventory of standard NAT gateway is insufficient. | 操作失敗因為普通型的 NAT 閘道庫存不足。 | diagnosis |
| 400 | OperationUnsupported.NotPConnOwner | Only the owner of the leased line can update the bandwidth. | 非專線所有者不允許更新頻寬操作。 | diagnosis |
| 400 | OperationUnsupported.OnlyOneIpv6GatewayInVpc | Operation is not supported because a VPC is only allowed to have one IPv6 gateway. | 此操作不支援因為一個 VPC 只能有一個 IPv6 閘道。 | diagnosis |
| 400 | OperationUnsupported.OnlySupportNormalNetworkInterface | Next hop only supports binding normal network Interface. | 下一跳只支援繫結普通彈性網路卡。 | diagnosis |
| 400 | OperationUnsupported.OnlyULA | The IPv6 CIDR type can only be ULA. | 只支援 ULA 類型的 IPv6 位址。 | diagnosis |
| 404 | OperationUnsupported.PayByLcuNatModifySpec | The spec of payByLcu nat is unsupported to modify. | 按量計費 NAT 閘道的規格不支援修改。 | diagnosis |
| 400 | OperationUnsupported.PrePaid | %s is unsupported. | IPv6 公網頻寬不支援預付費，請參考 API 文件參數說明修改後重試。 | diagnosis |
| 400 | OperationUnsupported.PrePaidPyByLcu | The operation failed because the subscription NAT gateway does not support the pay-by-LCU billing method. | 預付費的 NAT 閘道執行個體不支援 PayByLcu 的計費方式。 | diagnosis |
| 400 | OperationUnsupported.PrivateGUA | This operation does not support private GUA addresses. | 當前操作不支援私網 GUA 位址。 | diagnosis |
| 400 | OperationUnsupported.PublishPrefixListRouteEntry | Publishing prefix list route entry is unsupported. | 發佈路由前綴列表路由操作不支援。 | diagnosis |
| 400 | OperationUnsupported.PublishSystemRouteEntry | Publishing system route entry is unsupported. | 發佈系統路由操作不支援。 | diagnosis |
| 400 | OperationUnsupported.Qos | QoS is unsupported. | 當前使用者不支援建立 QoS，請聯繫商務經理。 | diagnosis |
| 400 | OperationUnsupported.RegionAndServiceLocationNotMatch | Operation is not supported because the region and service location do not match. | 操作不支援因為 Region 和服務區域不支援。 | diagnosis |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroup is not supported in this region. | 資源群組功能未開啟。 | diagnosis |
| 400 | OperationUnsupported.ResourceGroupId | ResourceGroupId in financial region is unsupported. | 操作不支援，在金融雲中不支援資源群組 ID。 | diagnosis |
| 400 | OperationUnsupported.RouterInterfaceExist | Operation failed because the VPC has a router interface. | 操作失敗因為 VPC 有路由器介面存在。 | diagnosis |
| 400 | OperationUnsupported.ScopeInvalidRouteType | The specified route type is unsupported. | 不支援此路由類型。 | diagnosis |
| 400 | OperationUnsupported.ServiceManaged | Operation of %s is forbidden because this instance belongs to Service manager. | 不允許操作，該執行個體屬於託管資源。 | diagnosis |
| 400 | OperationUnsupported.SetDPD | Current version of the VPN does not support setting DPD. | 當前 VPN 閘道版本不支援 DPD 功能。 | diagnosis |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | You cannot set the bandwidth of VBR with multiple physical connections. | VBR 多 PCONN 不支援設定頻寬。 | diagnosis |
| 400 | OperationUnsupported.SetMultiPconnBandwidth | Set Multi PhysicalConnection Bandwidth Unsupported. | 不支援多實體連線頻寬。 | diagnosis |
| 400 | OperationUnsupported.SetNatTraversal | Current version of the VPN does not support setting NAT traversal. | 當前 VPN 閘道版本不支援 NAT 穿越功能。 | diagnosis |
| 400 | OperationUnsupported.SkipConstruction | You are not authorized to skip the construction. | 您沒有權限跳過施工到支付。 | diagnosis |
| 400 | OperationUnsupported.SkipConstruction | You can not skip construction. | 不能跳過施工步驟進入下一步。 | diagnosis |
| 400 | OperationUnsupported.SpecifyIpOnIpv6Entry | You cannot specify the private IP address when you create IPv6 route entries. | 建立 IPv6 路由不允許指定 private IP 參數。 | diagnosis |
| 404 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | 無法解除系統路由表的關聯。 | diagnosis |
| 400 | OperationUnsupported.ULA | %s is unsupported. | 當前操作不支援 ULA 位址。 | diagnosis |
| 400 | OperationUnsupported.UnboundIpv6Feature | The region does not support creating IPv6 addresses that are not bound to any resources. | 該地域不支援建立未繫結資源的 IPv6 位址執行個體。 | diagnosis |
| 400 | OperationUnsupported.UnboundIpv6PrefixFeature | The region does not support creating IPv6 prefix that are not bound to any resources. | 該地域不支援建立未繫結資源的 IPv6 前綴網段。 | diagnosis |
| 400 | OperationUnsupported.UnsupportedNextHop | Unsupported nexthop type for route entry publish operation. | 路由條目的下一跳類型不支援發佈。 | diagnosis |
| 400 | OperationUnsupported.VBRAttachedCen | Operation failed because the VBR is attached to CEN. | 操作失敗，因為 VBR 已關聯到 CEN。 | diagnosis |
| 400 | OperationUnsupported.VBRAttachedECR | VBR already attached to ECR, please delete it from ECR. | 邊界路由器已經繫結了專線閘道，先將邊界路由器從專線閘道中刪除後重試。 | diagnosis |
| 400 | OperationUnsupported.VbrWithMultiPconn | The vbr %s has multiple pconn. | VBR 繫結了多個 PCONN。 | diagnosis |
| 400 | OperationUnsupported.VirtualBorderRouterEnableIPv6 | The operation failed. The device or region does not support IPv6 functions. | 操作失敗，裝置或 Region 不支援 IPv6 功能。 | diagnosis |
| 400 | OperationUnsupported.VpcAttachedCen | Operation failed because the VPC is attached to CEN. | 操作失敗因為 VPC 加入了 CEN。 | diagnosis |
| 400 | OppositeRouterInterfaceIsDeleted | The opposite router interface is already deleted. | 對端的路由器介面已被刪除。 | diagnosis |
| 400 | OptInRequired.FlowLog | You are not authorized to use the requested service of flowLog. Ensure that you have subscribed to the service you are trying to use. | 您無權使用請求的 flowLog 服務。確保您已經訂閱了您嘗試使用的服務。 | diagnosis |
| 400 | OptInRequired.PublicIpAddressPool | You are not authorized to use the requested service of publicIpAddressPool. Ensure that you have subscribed to the service you are trying to use. | 您無權使用請求的 IP 位址池服務。確保您已經訂閱了您嘗試使用的服務。 | diagnosis |
| 400 | OptInRequired.TrafficMirror | You need to subscribe to the traffic mirror service first. | 未開通流量鏡像服務。 | diagnosis |
| ORDER.ACCOUNT_STATUS_ILLEGAL | 帳戶狀態非法。 | diagnosis | ||
| ORDER.ARREARAGE | 帳戶餘額不足。 | diagnosis | ||
| ORDER.BID_USER_ ORDER_FORBIDDEN | 此帳戶不能購買競價型執行個體。 | diagnosis | ||
| ORDER.INSTANCE_HAS_INACTIVE_CHANGE | 變更正在處理中。 | diagnosis | ||
| ORDER.INST_HAS_UNPAID_ORDER | 此帳戶有未支付的訂單。 | diagnosis | ||
| ORDER.INST_HAS_UNSETTLED_BILLS | 此帳戶有未支付的訂單。 | diagnosis | ||
| 400 | Order.NoRealNameAuthentication | Real-name verification has not been completed for the account. | 您尚未進行實名認證，請前往帳號中心完成實名認證。 | diagnosis |
| ORDER.NOT_ENOUGH_ACTIVITY_STOCK | 活動庫存不足。 | diagnosis | ||
| ORDER.NO_REAL_NAME_AUTHENTICATION | 帳戶尚未完成實名認證。 | diagnosis | ||
| ORDER.OPEND | 執行個體已經開通。 | diagnosis | ||
| 400 | ORDER.OPENED | You have already open the service. Go to the console to start using it. | 已經開通出雲端流量服務，去控制台使用它。 | diagnosis |
| ORDER.ORDER_AMOUNT_ILLEGAL | 訂單金額無效。 | diagnosis | ||
| ORDER.PERIOD_INVALID | 購買的週期無效。 | diagnosis | ||
| 400 | ORDER.QUANTITY_INVALID | User quota has exceeded the limit. | 您當前保有的 EIP 數量已達上限，可前往配額管理提升 EIP 數量配額。 | diagnosis |
| ORDER.QUOTA_EXCEEDED | 超出購買限額。 | diagnosis | ||
| ORDER.SYS_CONSTRAINT_INVALID | 訂單系統約束校驗不通過。 | diagnosis | ||
| 400 | OrderError | Failed to create the order. | 建立訂單失敗，請稍後重試。 | diagnosis |
| 400 | OrderError.EIP | Failed to place an order. | 下單失敗。 | diagnosis |
| 400 | OrderError.EIP | The account failed to create an order. | 下單失敗。 | diagnosis |
| 400 | OrderError.EIP | The Account failed to create order. | 下單失敗。 | diagnosis |
| OrderFailed | 建立訂單失敗。 | diagnosis | ||
| 400 | OrderFailed.ConcurrentOperate | Failed to create the order due to concurrent operations. | 建立訂單失敗，因為並行操作。 | diagnosis |
| 400 | PARAMETER.FULLNAT.NATGATEWAYID.ERROR | natGatewayId is invalid | 參數 natGatewayId 不合法。 | diagnosis |
| 400 | Parameter.Illegal | The parameter is illegal. | 參數非法。 | diagnosis |
| ParameterIllegal | ipCount | 參數 IpCount 的值不合法。 | diagnosis | |
| 400 | ParameterIllegal.Name | ParameterIllegal.Name | 規則條目名稱非法。 | diagnosis |
| 400 | ParameterInvalid | Invalid parameter. | 入參非法。 | diagnosis |
| 400 | ParameterLengthIllegal.Name | ParameterLengthIllegal.Name | 規則條目的名稱長度非法。 | diagnosis |
| ParameterMismatch.Role-Spec | The specified Spec and Role mismatch. | 該路由器介面規格和角色不匹配。 | diagnosis | |
| PARAMETER_MUST_NOT_NULL | The specified physical connection id or vbrId must not be null. | 必須指定參數 vbrId 和 physicalconnectionId。 | diagnosis | |
| 400 | ParamExclusive.DisableIpv6AndIpv6CidrBlock | DisableIpv6 and Ipv6Cidr are mutually exclusive. | 操作衝突，不允許同時修改 Ipv6Cidr 和 DisableIpv6 功能。 | diagnosis |
| 400 | ParamExclusive.IpInstanceIdAndBandwidthPackageId | IpInstanceId and BandwidthPackageId is mutually exclusive. | IpInstanceId 和 BandwidthPackageId 是互斥的。 | diagnosis |
| 400 | ParamExclusive.Ipv6AddressIdAndIpv6InternetBandwidthId | Ipv6AddressId and Ipv6InternetBandwidthId is mutually exclusive. | 傳入的 Ipv6AddressId 和 Ipv6InternetBandwidthId 不屬於同一執行個體。 | diagnosis |
| 400 | ParamExclusive.RouteEntryIdAndRouteTableIdOrDestCidrBlock | RouteEntryId and RouteTableIdOrDestCidrBlock is mutually exclusive. | RouteEntryId 和 RouteTableIdOrDestCidrBlock 是互斥的。 | diagnosis |
| 400 | ParamExclusive.SnatIpAndNetworkInterfaceId | SnatIp and NetworkInterfaceId is mutually exclusive when create a snat entry for nat. | 為 NAT 閘道執行個體建立 SNAT 規則時，不能同時傳入 SnatIp 參數和 NetworkInterfaceId 參數。 | diagnosis |
| 400 | ParamExclusive.VpnGatewayIdAndVpnConnectionId | VpnGatewayId and VpnConnectionId is mutually exclusive. | VpnGatewayId 和 VpnConnectionId 是互斥的。 | diagnosis |
| ParamsInvalid | 請求參數錯誤。 | diagnosis | ||
| PAY.ACCOUNT_BOOK_NOT_EXIST | 指定的帳簿不存在。 | diagnosis | ||
| PAY.AMOUNT_LIMIT_EXCEEDED | 金額超限。 | diagnosis | ||
| PAY.COUPON_NOT_EXIST | 代金券不存在。 | diagnosis | ||
| PAY.COUPON_NOT_MEET_CONSUMPTION_RULE | 指定的優惠券不合規，無法使用。 | diagnosis | ||
| PAY.CURRENCY_INCONSISTENCY | 幣種不匹配。 | diagnosis | ||
| PAY.CURRENCY_NOT_SUPPORTED | 此帳戶不支援使用這種貨幣。 | diagnosis | ||
| PAY.GET_PAY_URL_ERROR | 取得儲值 url 異常。 | diagnosis | ||
| PAY.INSUFFICIENT_BALANCE | 帳號餘額不足。 | diagnosis | ||
| 400 | PAY.INSUFFICIENT_BALANCE | The Account Balance is insufficient. | 帳號餘額不足。 | diagnosis |
| 400 | PAY.INSUFFICIENT_BALANCE | Your account does not have enough balance. | 帳號餘額不足。 | diagnosis |
| PAY.INVALID_AMOUNT | 支付金額無效。 | diagnosis | ||
| PAY.INVALID_CREDIT_CARD | 指定的信用卡無效。 | diagnosis | ||
| 400 | PAY.MAYI.WITHHOLDING.AGREEMENT.ILLEGAL | User withhoding argeement is illegal. | 費用非法。 | diagnosis |
| PAY.NO_CREDIT_CARD | 此帳戶尚未新增信用卡。 | diagnosis | ||
| PAY.PAYMENT_PARAMETER_INVALID | 支付參數無效。 | diagnosis | ||
| PAY.PAY_ORDER_FAILED | 訂單支付失敗，請您稍後重試。 | diagnosis | ||
| 400 | PAY.QueryParentRelationshipFailed | Lx failed to query the current user hosting relationship. | 凌霄查詢當前使用者託管關係失敗。 | diagnosis |
| PAY.QUERY_QUOTA_BOOK_FAILED | 查詢使用者限額帳簿失敗。 | diagnosis | ||
| PAY.REFUND_FAILED | 退款失敗。 | diagnosis | ||
| PAY.STORED_CARD_NOT_EXIST | 指定的儲值卡不存在。 | diagnosis | ||
| PAY.TAX_CALC_FAILED | 稅額計算失敗。 | diagnosis | ||
| PAY.USER_DECLINED | 使用者拒付。 | diagnosis | ||
| PAY.WITHHOLDING_AGREEMENT_ILLEGAL | 預扣稅協議無效。 | diagnosis | ||
| 400 | PconnContailsMoreThanOneAcrossCountVbr | The specified physicalConnection contains more than one virtualBorderRouter which is across count. | 包含了超過 1 個跨帳號 VBR 的實體專線不支援故障演練。 | diagnosis |
| 400 | PconnContainsMoreThanOneVpconn | The specified physicalConnection contains more than one virtualPhysicalConnection. | 包含了超過 1 個共享實體專線的實體專線不支援故障演練。 | diagnosis |
| PHYSICAL_NOT_ALLOW_ASSOCIATE_VBR | The specified operation not allow. | 無法執行該操作，實體專線有關聯的邊界路由器。 | diagnosis | |
| 400 | PHYSICAL_NOT_ASSOCIATE_TO_VBR | The specified PhysicalConnection have not associate to the vbr. | 該實體專線沒有建立邊界路由器。 | diagnosis |
| PRICE.INQUIRY_FAILED | 定價查詢失敗。 | diagnosis | ||
| PRICE.INVALID_INQUIRY_PARAMETER | 指定的定價查詢參數無效。 | diagnosis | ||
| PRICE.PRICING_PLAN_NOT_FOUND | 指定的定價方案不存在。 | diagnosis | ||
| PRICE.PRICING_PLAN_RESULT_NOT_FOUND | 商品定價計畫未找到。 | diagnosis | ||
| 400 | PRICE.PRICING_PLAN_RESULT_NOT_FOUND | The instance pricing plan result is not found. | 商品定價計畫未找到。 | diagnosis |
| 400 | Price.SystemError | Price inquiry failed. | 詢價失敗，請稍後重試。 | diagnosis |
| PRICE.TAXING_ERROR | 計稅失敗。 | diagnosis | ||
| PRODUCT.INSTANCE_RELEASED | 指定的執行個體已被釋放。 | diagnosis | ||
| PRODUCT.INSTANCE_TYPE_NOT_EXIST | 指定的執行個體類型不存在。 | diagnosis | ||
| PRODUCT.INSTANCE_TYPE_NOT_SUPPORTED | 此執行個體類型不可用於該帳戶。 | diagnosis | ||
| PRODUCT.INSUFFICIENT_STOCK | 由於相關資源不足，請求失敗。 | diagnosis | ||
| PRODUCT.NOT_AVAILABLE_IZ | 不支援指定的可用區。 | diagnosis | ||
| 400 | ProjectOrLogstoreNotExist | The specified project or logstore does not exist. | 指定的專案或 logstore 不存在。 | diagnosis |
| PURCHASE.NO_VAILD_PURCHASE | 購買無效。 | diagnosis | ||
| PURCHASE.PURCHASE_QUERY_FAILED | 查詢不到指定的購買記錄。 | diagnosis | ||
| 400 | PURCHASE.QUANTITY.LIMIT | Your purchase quantity exceeds the maximum limit. | 購買數量超出最大限額。 | diagnosis |
| QUANTITY_INVALID | 執行個體數超過限制。 | diagnosis | ||
| 400 | QueryVpnConnectionLog.NotFound | the connection log of the vpn connection is not found. | 未查詢到該 VPN 連線下的連線日誌。 | diagnosis |
| 400 | QuotaExceed.MultiBindedEip | The number of multi binded eip is over limit. | 可以繫結的多直通模式 EIP 數目超過限制。 | diagnosis |
| 400 | QuotaExceed.NetworkAclEntry | Network acl entry is over limit. | 網路 ACL 規則條目超出限制。 | diagnosis |
| QuotaExceed.RouterInterface | Living RouterInterface quota exceeded. | 當前啟用的路由器介面數量已達到配額。 | diagnosis | |
| QuotaExceeded | Route entry quota exceeded in this route table. | 當前使用者建立的對等連線路由器介面數量已達上限。 | diagnosis | |
| 400 | QuotaExceeded | Forward entry quota exceeded in this route table. | 同一個路由表中自訂路由條目不能超過 200 條，可以在配額管理頁面申請調整數量。 | diagnosis |
| 400 | QuotaExceeded | Route entry quota exceeded in associated route table. | prefixList 最大路由條目數超過關聯的路由表允許的最大路由條目。 | diagnosis |
| 400 | QuotaExceeded | RiPerUser quota exceeded | 當前使用者建立的對等連線路由器介面數量已達上限。 | diagnosis |
| 400 | QuotaExceeded.AttachVpcNumber | The maximum number of VPCs that can be attached to a DHCP options set is exceeded. | 單 DHCP 選項集執行個體可繫結的 VPC 數量已經超過配額。 | diagnosis |
| QuotaExceeded.BandwidthPackageCountOnNatGateway | BandwidthPackage count limit on one NatGateway exceeded. | 超過了共用頻寬包上限，一個 NAT 閘道最多可建立四個共用頻寬包。 | diagnosis | |
| 400 | QuotaExceeded.BandwidthPackageIps | The specified ipCount exceeded quota. | IP 數量超過上限，可以在配額管理頁面申請增加配額。 | diagnosis |
| 400 | QuotaExceeded.Bgp | bgp peer count per vbr quota exceed. | 邊界路由器的 BGP 鄰居數量已達到配額。 | diagnosis |
| QuotaExceeded.Bgp | bgp group count per vbr quota exceed. | 邊界路由器的 BGP 群組的數量已達到配額。 | diagnosis | |
| QuotaExceeded.BgpNetwork | bgp network count per vbr quota exceed. | 邊界路由器的 BGP 網路數量已達到配額。 | diagnosis | |
| 400 | QuotaExceeded.CidrReservationCount | The quota of VSwitchCidrReservation is exceeded. | 超過 VSwitchCidrReservation 的數量配額。 | diagnosis |
| 400 | QuotaExceeded.CidrReservationCount | QuotaExceeded.CidrReservationCount | 您建立的 CidrReservation 已超限。 | diagnosis |
| 400 | QuotaExceeded.CrossUserVBRPerUser | Cross virtual boarder router per user quota exceed. | 配額超限。 | diagnosis |
| 400 | QuotaExceeded.DomainNameServers | The maximum number of domain name servers cannot exceed 4. | 設定的 DomainNameServers 數量超過 4 個。 | diagnosis |
| 400 | QuotaExceeded.Eip | Elastic IP address quota exceeded. | 彈性公網 IP 的個數超過額度限制，如果您有更多額度的需求，您可申請提升彈性公網 IP 配額，或者考慮使用 NAT 閘道。 | diagnosis |
| 400 | QuotaExceeded.EipNumForModifyEipBondType | The quota of %s is exceeded, binded: %s, quota: %s. | 修改 EIP 繫結類型時允許的 EIP 個數超限。 | diagnosis |
| 400 | QuotaExceeded.FilterRelatedSession | The quota of the number of traffic mirror sessions related to one filter is exceeded. | 流量鏡像篩選條件所關聯的鏡像工作階段數量配額超限。 | diagnosis |
| 400 | QuotaExceeded.FlowlogCount | This user has reached the maximum instance number of flowlog. | 已達到流日誌的最大執行個體數。 | diagnosis |
| 400 | QuotaExceeded.ForwardEntrySessionManytoOne | The dnat session quota is exceed. | DNAT session 多對一的配額超限。 | diagnosis |
| QuotaExceeded.freePconnPerAP | free physical connections count excceeded. | 超過實體專線配額。 | diagnosis | |
| 400 | QuotaExceeded.FreePhysicalConnectionPerAccessPoint | Free physical connections count excceeded. | 超過使用者能建立的實體專線配額，請聯絡管理員增加配額後重試。 | diagnosis |
| QuotaExceeded.freevbr | Free virtual boarder router quota exceed. | 超過邊界路由器配額。 | diagnosis | |
| 400 | QuotaExceeded.FullNatEntry | The quota of %s is exceeded, usage %s/%s. | FullNatEntry 使用個數已經超額。 | diagnosis |
| 400 | QuotaExceeded.GatewayRouteTable | The quota of Gateway Route Table is exceeded. | 單 VPC 建立閘道路由表 Quota 已達上限。 | diagnosis |
| QuotaExceeded.GlobalAccelerationInstance | 全球加速執行個體數超過限制。 | diagnosis | ||
| 400 | QuotaExceeded.GUAIpv6CidrBlock | GUAIpv6CidrBlock quota exceeded. | GUAIpv6CidrBlock 已經達到配額限制。 | diagnosis |
| QuotaExceeded.HaVip | Living HaVip quota exceeded. | 超過活躍的 HAVIP 配額。 | diagnosis | |
| 400 | QuotaExceeded.IPv6CidrBlock | The number of IPv6 CIDR blocks in the VPC exceeds the limit. | VPC 中的 IPv6 網段數超過了限制。 | diagnosis |
| 400 | QuotaExceeded.Ipv6EgressRules | %s quota exceeded. | Ipv6EgressRules 數量配額超限。 | diagnosis |
| 400 | QuotaExceeded.IPv6PrefixMask | The quota of specifed ipv6 prefix mask is exceeded. | 指定的 IPv6 前綴遮罩超出配額。 | diagnosis |
| 400 | QuotaExceeded.NetworkInterfaceRelatedSession | The quota of the number of traffic mirror sessions related to one network interface is exceeded. | 單個網路卡所能關聯的流量鏡像工作階段數量配額超限。 | diagnosis |
| QuotaExceeded.Nqa | nqa count per vbr quota exceed. | NQA 數超過 VBR 配額。 | diagnosis | |
| 400 | QuotaExceeded.NumberOfEip | Binded eip Quota exceed on this NatGw. | 此 NAT 閘道上，繫結的 EIP 數量已經超出配額限制。 | diagnosis |
| 400 | QuotaExceeded.PBR | The policy-based routes has reached the upper limit. | 建立的策略路由條數已達上限。 | diagnosis |
| QuotaExceeded.pConnPerAP | Physical connection count per ap quota exceed. | 超過接入點的實體專線配額。 | diagnosis | |
| 400 | QuotaExceeded.PhysicalConnectionPerAccessPoint | Physical connection count per ap quota exceed. | 超過單接入點可購買的實體專線配額，請聯絡管理員增加配額。 | diagnosis |
| 400 | QuotaExceeded.PolicyBasedRoute | The maximum number of policy-based routes is exceeded. Existing routes: %s. Routes to be created: %s. Maximum routes: %s. | 策略路由條數已達上限，目前已有%s條，本次將建立%s條，上限為%s條。 | diagnosis |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of PoolIpQuantity is exceeded. | 位址池中 IP 數量配額超出限制。 | diagnosis |
| 400 | QuotaExceeded.PrefixesCount | The quota of prefixes count is exceeded. | 前綴數超過配額。 | diagnosis |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixListMaxEntry count is exceeded. | 傳入的最大 entryCount 超過閾值。 | diagnosis |
| 400 | QuotaExceeded.PrefixListCidrCount | The quota of prefixList entry maxEntry count is exceeded. | prefixList 允許的最大路由條目數量超過限制。 | diagnosis |
| 400 | QuotaExceeded.PrefixListCount | The quota of prefixList count is exceeded. | 使用者可建立的 prefixList 超過閾值。 | diagnosis |
| 400 | QuotaExceeded.PublicIpAddressPool | The quota of PublicIpAddressPool is exceeded. | 您的 PublicIpAddressPool 數量已達配額，請提升配額後操作。 | diagnosis |
| 400 | QuotaExceeded.Qos | The quota of QoS is exceeded. | 目前使用者的 QoS 策略數量超過限制，請聯絡商務經理解決。 | diagnosis |
| 400 | QuotaExceeded.QosHighPriorityQueueCount | The quota of QosHighPriorityQueueCount is exceeded. | QoS 策略中高優先順序佇列個數超過規格，如果需要提升配額，請聯絡商務經理。 | diagnosis |
| 400 | QuotaExceeded.QosMediumPriorityQueueBandwidthPercent | The quota of QosMediumPriorityQueueBandwidthPercent is exceeded. | QoS 策略中普通優先順序佇列的頻寬百分比之和超過規格。 | diagnosis |
| 400 | QuotaExceeded.QosMediumPriorityQueueCount | The quota of QosMediumPriorityQueueCount is exceeded. | QoS 策略中普通優先順序佇列個數超過規格，如果需要提升配額，請聯絡商務經理。 | diagnosis |
| 400 | QuotaExceeded.QosRuleCount | The quota of QosRuleCount is exceeded. | QoS 佇列中 QoS 規則數量超過上限，如果想要提升配額，請聯絡商務經理。 | diagnosis |
| 400 | QuotaExceeded.RegionDhcpOptionsSet | The quota of dhcpOptionsSet in the region is exceeded. | 單使用者允許建立 DHCP 選項集執行個體數量超過配額。 | diagnosis |
| 400 | QuotaExceeded.ReservedCidrMask | QuotaExceeded.ReservedCidrMask | 您指定的 ReservedCidrMask 不合法，請根據請求參數規定重新輸入。 | diagnosis |
| 400 | QuotaExceeded.RouteTable | VPC RouteTable quota exceeded. | 超過 VPC RouteTable 配額。 | diagnosis |
| 400 | QuotaExceeded.SameAccountVBRPerPconn | Same account virtual boarder router per physicalConnection quota exceed. | VBR 超過配額。 | diagnosis |
| 400 | QuotaExceeded.SessionNum | The quota of the number of traffic mirror sessions is exceeded. | 流量鏡像工作階段數量超限。 | diagnosis |
| 400 | QuotaExceeded.SlbRelatedSession | The quota of the number of traffic mirror sessions related to one SLB is exceeded. | 單個 SLB 所能關聯的流量鏡像工作階段數量配額超限。 | diagnosis |
| 400 | QuotaExceeded.SourceNumPerSession | The quota of the number of traffic mirror sources per session is exceeded. | 每個流量鏡像工作階段所允許關聯的來源的數量配額超限。 | diagnosis |
| 400 | QuotaExceeded.SourceNumPerTarget | The maximum number of traffic mirror sources for a target is exceeded. | 該鏡像目標關聯的鏡像來源數量超過限額。 | diagnosis |
| 400 | QuotaExceeded.TagNum | Custom Tags quota exceeded | quota 超限。 | diagnosis |
| 400 | QuotaExceeded.TrafficMirrorFilter | The maximum number of traffic image filters is exceeded. | 流量鏡像篩選條件數量配額超限。 | diagnosis |
| 400 | QuotaExceeded.TrafficMirrorRulesPerFilter | The quota of the number of traffic mirror rules per filter is exceeded. | 單個流量鏡像篩選條件所關聯的篩選規則數量配額超限。 | diagnosis |
| 400 | QuotaExceeded.VBRBandwidth | The VBR bandwidth must not exceed the physical connection bandwidth. | 邊界路由器頻寬超過限制（實體專線頻寬）。 | diagnosis |
| 400 | QuotaExceeded.VbrPerAccessDevice | Virtual boarder router per access device quota exceed. | 裝置配額超限。 | diagnosis |
| QuotaExceeded.vbrPerpConn | Virtual boarder router per PhysicalConnection quota exceed. | 超過了每個實體專線上的邊界路由器配額上限，請您減少該實體專線上的邊界路由器數量後再試。 | diagnosis | |
| 400 | QuotaExceeded.VbrPerPconnPortSpec | Quota exceed for current port spec | quota 超限。 | diagnosis |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | The quota for virtual border router bandwidth is exceeded. | VirtualBorderRouterBandwidth 配額超限。 | diagnosis |
| 400 | QuotaExceeded.VirtualBorderRouterBandwidth | Quota Exceeded of VirtualBorderRouterBandwidth | VBR 頻寬配額超限。 | diagnosis |
| 400 | QuotaExceeded.Vpc | VPC quota exceeded. | 使用者名稱下的 VPC 數量達到配額上限。 | diagnosis |
| 400 | QuotaExceeded.VPCONN | The quota of VPCONN_COUNT_PER_PCONN is exceeded | 單根實體連接埠上建立的共用連接埠配額超限。 | diagnosis |
| 400 | QuotaExceeded.VpnRouteEntry | The number of route entries to the VPN gateway in the VPC routing table has reached the quota limit. | VPC 路由表中指向 VPN 閘道的路由條目已經達到配額限制。 | diagnosis |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | 建立路由條目失敗，因為 VPN 路由條目超出限制。 | diagnosis |
| 400 | QuotaExceeded.VSwitch | Virtual switch quota exceeded. | vSwitch 數量達到配額上限，請您減少 vSwitch 數量後再試。 | diagnosis |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The quota of VSwitchCidrReservationMask is exceeded. | VSwitchCidrReservationMask 超出配額，請參考 API 文件參數說明修改後重試。 | diagnosis |
| 400 | QuotaExceeded.VSwitchCidrReservationMask | The operation is failed because of %s. The mask of the reserved subnet cidr exceeds the current default mask of IP Prefix, %s/%s. | 操作失敗因為%s配額的限制。預留網段的遮罩超過了當前 IP Prefix 的預設遮罩，%s/%s。 | diagnosis |
| RealNameAuthenticationError | Your account has not passed the real-name authentication yet. | 您的帳號尚未進行實名認證，請您先對帳號做實名認證後再操作。 | diagnosis | |
| 400 | ReferredByRouteEntry.RouterInterface | Router interface referred by route entry. | 路由器介面被路由條目引用。 | diagnosis |
| ReserveIpFail | Reserve eip failed. | EIP 預留失敗。 | diagnosis | |
| 400 | Resource.PbrRouteQuotaFull | The quota of Policy-based route is full. | 策略路由配額超限。 | diagnosis |
| Resource.QuotaFull | The quota of resource is full | 您現在所操作的資源目前已經達到了配額的上限，請參考 VPN 操作文件，進行配額提升或者使用其他方案進行規避。 | diagnosis | |
| 400 | Resource.QuotaFull | The resources you are operating have reached the upper limit of the quota. Please increase the quota or use other solutions to avoid it according to the VPN operation document. | 您現在所操作的資源目前已經達到了配額的上限，請參考 VPN 操作文件，進行配額提升或者使用其他方案進行規避。 | diagnosis |
| 400 | ResourceAlreadyAssociated.GatewayRouteTable | The specified resource %s is already associated. | 指定的閘道路由表已繫結同類型閘道執行個體。 | diagnosis |
| 400 | ResourceAlreadyAssociated.Ipv4Gateway | The specified resource %s is already associated. | 指定的 IPv4 閘道已經被繫結。 | diagnosis |
| 400 | ResourceAlreadyAssociated.PconnQos | The specified resource of PconnQos is already associated. | 實體專線已經繫結到了其他的 QoS 策略上。 | diagnosis |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | 操作失敗，此前綴列表路由存在。 | diagnosis |
| 400 | ResourceAlreadyAssociated.RouteTable | The specified route table is already associated. | 指定的路由表已經被繫結。 | diagnosis |
| 400 | ResourceAlreadyAssociated.TrafficMirrorSource | The specified traffic mirror source and session are already associated. | 指定的流量鏡像來源和工作階段已經繫結。 | diagnosis |
| 400 | ResourceAlreadyAssociated.Vbr | The specified Vbr is already added. | 指定的 VBR 已經被繫結。 | diagnosis |
| 400 | ResourceAlreadyExist.DefaultVSwitch | The specified resource default vswitch already exists. | 預設交換器已存在。 | diagnosis |
| 400 | ResourceAlreadyExist.FullNatEntry | The specified resource of %s is already exist. | 此 FULLNAT 規則已經存在。 | diagnosis |
| 400 | ResourceAlreadyExist.NatIp | The specified resource of NatIp has already exist. | 設定的 NatIp 已存在。 | diagnosis |
| 400 | ResourceAlreadyExist.NatIpCidr | The configured NatIpCidr already exists, or the IP address is overlap. | 設定的 NatIpCidr 已存在，或者 IP 位址存在覆蓋。 | diagnosis |
| 400 | ResourceAlreadyExist.NatQosEntry | The specified natGateway qosEntry already exists | 此限速規則已經存在。 | diagnosis |
| 400 | ResourceInConfiguring | The resource is being configured. | 資源正在變更配置中。 | diagnosis |
| 400 | ResourceInUse.Vbr | The specified resource of [%s] is in use. | 指定的 VBR 還在使用。 | diagnosis |
| ResourceNotAssociated | The HaVip and ECS instance are not associated. | HAVIP 和 ECS 沒有繫結。 | diagnosis | |
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | 操作失敗，本 VPC 未關聯到此 CEN 中。 | diagnosis |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | 當前資源未與專線閘道關聯，無法執行此操作，請核對後重試。 | diagnosis |
| 400 | ResourceNotAssociated.TargetInstance | The target instance is not associated with VPC. | 路由發佈的目標執行個體沒有和 VPC 關聯。 | diagnosis |
| 400 | ResourceNotAssociated.TrafficMirrorSource | The specified traffic mirror source and session are not associated. | 指定的流量鏡像來源和工作階段不存在繫結關係。 | diagnosis |
| 400 | ResourceNotAssociated.VBR | The specified resource of VBR is not associated. | 指定的邊界路由器 VBR 未關聯到 BondRI，請確認後重試。 | diagnosis |
| ResourceNotAvailable | Resource you requested is not available in this region or zone. | 當前地域或可用區不支援建立交換器。 | diagnosis | |
| 400 | ResourceNotAvailable.NoZonesAvailable | The availability zones of the input region are not available. | 入參的 region 的可用區不可用。 | diagnosis |
| ResourceNotAvailable.Vpc | Resource you requested is not available in this region or zone. | 您請求的資源在該地域或可用區中不可用。 | diagnosis | |
| 400 | ResourceNotEnough.Bandwidth | The specified resource of Bandwidth is not enough. | 頻寬資源不足。 | diagnosis |
| 400 | ResourceNotEnough.CidrBlock | Out of Resources: No matching CIDR block found. | 資源不足：未找到匹配的 CIDR 區塊。 | diagnosis |
| 400 | ResourceNotEnough.CidrBlock | The specified resource is not enough. | 指定的資源不足。 | diagnosis |
| 400 | ResourceNotEnough.CommonBandWidthPackage | The specified resource commonBandWidthPackage is not enough. | 共用頻寬包資源不足。 | diagnosis |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource of Ipv6Cidr is not enough. | IPv6 位址資源不足。 | diagnosis |
| 400 | ResourceNotEnough.Ipv6Cidr | The specified resource ipv6 cidr is not enough. | 指定的 IPv6 網段資源不足。 | diagnosis |
| 400 | ResourceNotEnough.NatIp | The specified resource of NatIp is not enough. | Insufficient IP addresses in the specified CIDR block. | diagnosis |
| 400 | ResourceNotEnough.SwitchAvailableIps | The available private Ip number is not enough in your subnet. | 子網中可用的私網 IP 不足。 | diagnosis |
| 400 | ResourceNotFound | The specified resource %s is not found. | 特定資源不存在。 | diagnosis |
| 404 | ResourceNotFound.%s | The specified resource of %s is not found. | 指定的資源不存在。 | diagnosis |
| 400 | ResourceNotFound.AccessPointId | The specified resource of access point id is not found. | 目前接入點資訊不存在，請核對後重試。 | diagnosis |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of [%s] is not found. | BondRi Connection 不存在。 | diagnosis |
| 400 | ResourceNotFound.BondRiConnection | The specified resource of BondRI not found. | 指定的 BondRI 執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | 操作失敗，傳入Cen資源不存在。 | diagnosis |
| 400 | ResourceNotFound.CidrBlock | The specified CIDR block is not found. | 您添加的網段不存在。 | diagnosis |
| 400 | ResourceNotFound.CidrReservation | The specified resource of %s is not found | 指定的CidrReservation不存在，請確認 CidrReservation 的狀態是否可用。 | diagnosis |
| 404 | ResourceNotFound.CidrReservation | The specified resource of VSwitchCidrReservation is not found. | 指定的VSwitchCidrReservation執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.CidrReservation | ResourceNotFound.CidrReservation | 您指定的 VSwitchCidrReservation 不存在，請確認 VSwitchCidrReservation的狀態是否可用。 | diagnosis |
| 400 | ResourceNotFound.CidrReservation | reserve segment not exist. | 網段不存在。 | diagnosis |
| 400 | ResourceNotFound.EcsInstance | The specified resource of ECS instance is not found. | 指定的ECS執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.EipSegment | The specified resource of Eip Segment is not found. | 傳入的連續EIP組執行個體不存在。 | diagnosis |
| 404 | ResourceNotFound.ForwardEntry | The specified resource of %s is not found. | 找不到指定的%s資源。 | diagnosis |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of %s is not found. | 沒有找到該FullNatEntry。 | diagnosis |
| 400 | ResourceNotFound.FullNatEntry | The specified resource of full nat entry is not found. | 沒有找到該full nat entry。 | diagnosis |
| 404 | ResourceNotFound.FullNatTable | The NAT gateway has no full nat table. | NAT閘道沒有full nat 表。 | diagnosis |
| 400 | ResourceNotFound.FullNatTableId | The specified resource of %s is not found. | FullNat表不存在。 | diagnosis |
| 400 | ResourceNotFound.GatewayEndpoint | The specified resource gateway endpoint is not found. | 指定的GatewayEndpoint不存在。 | diagnosis |
| 404 | ResourceNotFound.GatewayLoadBalancerEndpoint | GatewayLoadBalancerEndpoint instance not found. | 未找到GatewayLoadBalancerEndpoint執行個體。 | diagnosis |
| 400 | ResourceNotFound.GatewayRouteTable | The specified resource GatewayRouteTable is not found. | 無法找到指定的閘道路由表。 | diagnosis |
| 400 | ResourceNotFound.Instance | The specified resource nextHop is not found. | 下一跳執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.Instance | The specified binding resource is not found. | 繫結資源不存在。 | diagnosis |
| 400 | ResourceNotFound.Ip | The specified ip is not found. | 找不到指定的IP。 | diagnosis |
| 404 | ResourceNotFound.IpamPool | The dependent IPAM pool is not found. | 依賴資源IPAM Pool不存在。 | diagnosis |
| 400 | ResourceNotFound.Ipv4Gateway | The specified resource ipv4Gateway is not found. | 未找到指定的Ipv4閘道，無法刪除。 | diagnosis |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | 傳入的IPv4閘道執行個體不存在。 | diagnosis |
| 404 | ResourceNotFound.Ipv6Address | The specified resource of %s is not found. | 您指定的Ipv6Address不存在，請檢查您的輸入是否正確。 | diagnosis |
| 404 | ResourceNotFound.Ipv6EgressOnlyRule | The specified resource of IPv6 Gateway Rule is not found. | 指定的IPv6僅主動出規則執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.Ipv6Gateway | The specified resource of IPv6 Gateway is not found. | 傳入的IPv6閘道執行個體不存在。 | diagnosis |
| 404 | ResourceNotFound.Ipv6InstanceId | The specified resource of %s is not found. | 指定的IPv6執行個體ID不存在，請檢查您的輸入是否正確。 | diagnosis |
| 404 | ResourceNotFound.NatGateway | The NatGateway instance not exist. | 此nat閘道不存在。 | diagnosis |
| 404 | ResourceNotFound.NatGateway | The specific NAT gateway is not found. | 指定的 NAT 閘道不存在。 | diagnosis |
| 400 | ResourceNotFound.NatIp | The specified resource of %s is not found. | NatIp資源找不到。 | diagnosis |
| 400 | ResourceNotFound.NatIpCidr | The specified resource of %s is not found. | 找不到指定的%s資源。 | diagnosis |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | 指定的網路卡不存在。 | diagnosis |
| 400 | ResourceNotFound.NetworkInterface | The specified resource nextHop is not found. | 下一跳彈性網路卡不存在。 | diagnosis |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of %s is not found. | 指定的NetworkInterface %s 不存在。 | diagnosis |
| 400 | ResourceNotFound.NetworkInterfaceId | The specified resource is not found. | 該資源沒有找到。 | diagnosis |
| 400 | ResourceNotFound.NextHop | The specified resource nextHop is not found. | 下一跳執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.PhysicalConnection | The specified resource of %s is not found. | 實體專線不存在。 | diagnosis |
| 400 | ResourceNotFound.PhysicalConnectionId | PhysicalConnection is not found. | PhysicalConnectionId未找到。 | diagnosis |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified PhysicalConnectionId [%s] is not found. | PhysicalConnectionId未找到。 | diagnosis |
| 400 | ResourceNotFound.PhysicalConnectionId | The specified resource of [%s] is not found. | PhysicalConnection 不存在。 | diagnosis |
| 400 | ResourceNotFound.PrefixList | The specified resource of prefixList is not found. | 輸入的 prefixList 不存在。 | diagnosis |
| 400 | ResourceNotFound.PrefixListRelation | The specified resource of prefixList relation is not found. | PrefixList 關聯關係不存在。 | diagnosis |
| 400 | ResourceNotFound.PublicIpAddressPool | The specified resource of PublicIpAddressPool [%s] is not found. | 指定的公網 IP 位址池執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.QosTableIdOrNatGatewayId | natGatewayId and qosTableId can not both be null | natGatewayId 和 qosTableId 不能都為空。 | diagnosis |
| 400 | ResourceNotFound.RouteEntry | The specified resource routeEntry is not found. | 指定的路由條目不存在。 | diagnosis |
| 400 | ResourceNotFound.RouteTable | The specified resource gatewayRouteTable is not found. | 閘道路由表不存在。 | diagnosis |
| 400 | ResourceNotFound.Slb | The specified resource of SLB is not found. | 指定的 SLB 不存在。 | diagnosis |
| 404 | ResourceNotFound.SnatEntry | Specified SNAT entry does not exist. | 指定的 SNAT 條目不存在。 | diagnosis |
| 400 | ResourceNotFound.TargetInstance | The specified target instance for traffic mirroring is not found. | 指定的流量鏡像目標執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.TrafficMirrorFilter | The specified resource of traffic mirror filter is not found. | 指定的流量鏡像篩選條件不存在。 | diagnosis |
| 400 | ResourceNotFound.TrafficMirrorRule | The specified resource of traffic mirror rule is not found. | 指定的流量鏡像篩選規則不存在。 | diagnosis |
| 400 | ResourceNotFound.TrafficMirrorSession | The specified resource of traffic mirror session is not found. | 指定的流量鏡像工作階段不存在。 | diagnosis |
| 400 | ResourceNotFound.VirtualBorderRouter | The specified resource of %s is not found. | 虛擬邊界路由器不存在。 | diagnosis |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | 無法找到指定的 VpcPeer。 | diagnosis |
| 400 | ResourceNotFound.VSwitch | The specified resource of VSwitch is not found. | 指定的 VSwitch 執行個體不存在。 | diagnosis |
| 400 | ResourceNotFound.VSwitch | ResourceNotFound.VSwitch | 您指定的 VSwitch 不存在，請確認 VSwitch 的狀態是否可用。 | diagnosis |
| 404 | ResourceNotFound.VSwitch | The specified resource of %s is not found. | 指定的 vSwitch 不存在，請檢查您的輸入是否正確。 | diagnosis |
| 400 | ResourceNotFound.VSwitch | The vSwitch where the specified networkinterface is located does not exist. | 彈性網路卡所在的交換器不存在。 | diagnosis |
| 404 | ResourceNotFound.VSwitchCidrReservation | The dependent vswitch cidr reservation is not found. | 依賴資源 vSwitchCidrReservation 不存在。 | diagnosis |
| 400 | ResourceNotInResourceGroup | The specified resource is not in the specified ResourceGroup. | 輸入的資源不在輸入的資源群組內。 | diagnosis |
| 400 | ResourceQueryError | The specified resource is queried error. | 查詢指定的資源時出錯。 | diagnosis |
| 400 | ResourceQuotaExceeded.NatQosEntry | The specified natGateway qosEntry quota exceed. | 此 NatGateway 保護性限速條目數已經達到配額。 | diagnosis |
| 400 | ResourceStatus.Error | The binding instance is in middle status. | 繫結執行個體處於中間狀態。 | diagnosis |
| 400 | ResourceType.Unknown | Unknown ResourceType. | 資源類型不存在。 | diagnosis |
| RISK.RISK_CONTROL_REJECTION | 帳號被風控系統停用。 | diagnosis | ||
| RI_CREATE_ONE_LIMIT_BY_SYNC | Create ri only one limit by sync. | 限制同步建立路由器介面。 | diagnosis | |
| 400 | RouteConflict | Route conflict exists in routing table. | 路由表中存在路由衝突。 | diagnosis |
| 400 | RouteConflict.AlreadyExist | Route conflict exists in routing table. | 路由表中存在路由衝突。 | diagnosis |
| RouterEntryConflict.Duplicated | A route entry already exists | 該路由條目已存在。 | diagnosis | |
| 400 | RouterInterfaceReferredByRouteEntry | Router interface referred by route entry. | 存在指向路由器介面的路由導致無法刪除。 | diagnosis |
| ROUTER_INTERFACE_REFERED_BY_ROUTEENTRY | The specified VlanInterface has been used by routeEntry. | 該VLAN介面已經使用在路由條目中。 | diagnosis | |
| 400 | RuleExist | The rule already exists. | 規則已存在。 | diagnosis |
| 400 | SecurityGroup.NotExist | The specified security group is not exist. | 安全性群組不存在於此 VPC。 | diagnosis |
| 400 | SecurityGroupType.NotSupported | The specified security group type is not supported. | 安全性群組已經被託管，不能使用。 | diagnosis |
| 400 | ServiceUnavailable | The request has failed due to a temporary failure of the server. | 請求失敗，因為臨時伺服器故障。 | diagnosis |
| 400 | SignatureNonceUsed | Specified signature nonce was used already. | 指定的簽章隨機數已經被使用。 | diagnosis |
| 400 | SizeLimitExceeded.ResourceId | The maximum number of resource IDs is exceeded. | 資源群組 ID 數目超限。 | diagnosis |
| 400 | SizeLimitExceeded.TagNum | The maximum number of tags is exceeded. | 標籤數量超限。 | diagnosis |
| SNAT_IP_POOL_COUNT_TOO_MANY | The Snat pool ip too many. | SNAT IP 池的 IP 達到配額。 | diagnosis | |
| 400 | SourceProjectNotExist | The Source Project or logstore does not exist. | SLS 來源專案或日誌庫不存在。 | diagnosis |
| 400 | SslVpnIDaaS2.NotSupport | Current version of the VPN does not support IDaaS2.0. | 目前 VPN 執行個體版本不支援使用 IDaaS2.0。 | diagnosis |
| 400 | SslVpnServer.AddRouteError | Add route error whose destination is client IP pool, please check vpc route entry and relevant quota. | 新增指向用戶端網段的路由失敗，請查看 VPC 路由條目及相關配額。 | diagnosis |
| 400 | SslVpnServer.AlreadyExist | The SSL VPN server of specified vpn gateway already exists. | 指定 VPN 閘道的 SSL VPN 伺服器已存在。 | diagnosis |
| 400 | SslVpnServerPort.Illegal | The server port is not in the range of [1-65535]. | SSL VPN 伺服端連接埠號需要在[1-65535]之間。 | diagnosis |
| 500 | SystemBusy | The system is busy. Please try again later. | 目前系統繁忙，請稍後重試。 | diagnosis |
| 400 | SystemQuotaConstraint.Filter.Key | The number of keys in the filter parameter cannot exceed 5. | 過濾參數中 Key 的個數不允許超過 5 個。 | diagnosis |
| 400 | SystemQuotaConstraint.Filter.Value | The number of values in a key in the filter parameter cannot exceed 5. | 過濾參數中一個 Key 裡面的 Value 個數不能超過 5 個。 | diagnosis |
| TaskConflict | The eip operate too frequent | 操作過於頻繁，請稍等一會再重試。 | diagnosis | |
| 400 | TaskConflict | The operation is too frequent. Please wait a moment and try again. | 目前操作太頻繁，請稍後重試。 | diagnosis |
| 400 | TaskConflict | The operation is too frequent. Please try again later. | 操作過於頻繁，請稍後重試。 | diagnosis |
| 400 | TaskConflict | The eip operate too frequent, TaskConflict. | 操作過於頻繁，任務衝突。 | diagnosis |
| 400 | TaskConflict | The operation is too frequent, TaskConflict. | 操作太頻繁，請稍後重試。 | diagnosis |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | 操作過於頻繁，請稍等一會再重試。 | diagnosis |
| TaskConflict.AssociateGlobalAccelerationInstance | Operate too frequent. | 操作過於頻繁。 | diagnosis | |
| Throttling | Request was denied due to request throttling. | 您這個時段的流量已經超限。如果不能滿足現有業務要求可以提工單進行申請。 | diagnosis | |
| 400 | Throttling.User | Request was denied due to user flow control. | 由於使用者端流控，請求被拒絕。 | diagnosis |
| 400 | Unauthorized | This api does not support sub user or role. | 此 API 不支援子使用者或角色。 | diagnosis |
| 400 | Unavailable.Ipv6Cidr | The specified resource ipv6 cidr is not available. | 指定的 IPv6 網段不可用。 | diagnosis |
| UnknownError | The request processing has failed due to some unknown error. | 未知錯誤，請重試操作，錯誤仍存在請提交工單處理。 | diagnosis | |
| 400 | UnsupportedFeature.AccessModeValue | The feature of AccessMode.ModeValue(%s) is not supported. | VPC NAT 的 AccessMode.ModeValue 屬性不支援此操作。 | diagnosis |
| 400 | UnsupportedFeature.AllocateEipAddressWithZone | The feature of AllocateEipAddressWithZone is not supported. | 目前地域不支援指定 Zone 建立執行個體。 | diagnosis |
| 400 | UnsupportedFeature.CloudBoxHaVip | The HAVIP feature is not supported in cloud box. | 雲盒不支援建立高可用 VIP。 | diagnosis |
| 400 | UnsupportedFeature.CloudBoxIpv6 | The IPv6 feature is not supported by cloud box. | 雲盒不支援建立 IPv6。 | diagnosis |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | 目前不支援使用前綴列表建立 ECMP 路由。 | diagnosis |
| 400 | UnsupportedFeature.DhcpOptionsSet | The feature of dhcp options set is unsupported. | DHCP 選項集相關功能在目前地域不生效。 | diagnosis |
| 400 | UnsupportedFeature.EipBindIpAddress | The feature of EipBindIpAddress is not supported. | EIP 繫結 IpAddress 特性不支援。 | diagnosis |
| 400 | UnsupportedFeature.EipBindPrefixIp | The feature of EipBindPrefixIp is not supported. | 目前地域不支援 EIP 繫結 PrefixIp。 | diagnosis |
| 400 | UnsupportedFeature.EnableSessionLog | The feature of EnableSessionLog is not supported. | 目前執行個體不支援開啟 NAT 閘道工作階段日誌。 | diagnosis |
| 400 | UnsupportedFeature.FwNatInMutilBindedEipBindType | The FW NAT in MUTIL_BINDED eip bind type is can not be created. | EIP 繫結類型為 MUTIL_BINDED 的防護型不支援建立。 | diagnosis |
| 400 | UnsupportedFeature.Geneve | The feature of Geneve is not supported. | 目前不支援建立 Geneve 模式的 NAT 閘道。 | diagnosis |
| 400 | UnsupportedFeature.IcmpReplyEnabled | The feature of IcmpReplyEnabled is not supported. | ICMP 代答使能功能修改不支援。 | diagnosis |
| 400 | UnsupportedFeature.IndirectConvertForFwNat | The security protection enabled NAT gateway is not support change EIP bond type. | 開啟防護功能的公網 NAT 不支援修改 EIP 繫結類型。 | diagnosis |
| 400 | UnsupportedFeature.IndirectConvertForVpcNat | The VPC NAT gateway is not support to change EIP bond type. | VPC NAT 閘道不支援修改 EIP 的繫結類型。 | diagnosis |
| 400 | UnsupportedFeature.InternetChargeTypeOnFreeIpv6Address | The feature of %s is not supported. | 目前 IPv6 執行個體為游離態，不支援所指定的付費類型，請參考 API 文件參數說明修改後重試。 | diagnosis |
| 400 | UnsupportedFeature.InternetChargeTypeOnStaticIsp | The feature of %s is not supported. | 目前指定 IPv6 執行個體為單線 ISP 執行個體，不支援所指定的付費類型，請參考 API 文件參數說明修改後重試。 | diagnosis |
| 400 | UnsupportedFeature.IPAM | VPCs cannot be created by using IPAM. | 使用 IPAM 建立 VPC 特性不支援。 | diagnosis |
| 400 | UnsupportedFeature.Ipam | IPAM is not supported in this region. | 該地域不支援 IPAM 功能。 | diagnosis |
| 400 | UnsupportedFeature.Ipv4Gateway | The feature of ipv4Gateway is not supported for [%s]. | 建立 IPv4 閘道失敗，因為不支援 IPv4 閘道特性。 | diagnosis |
| 400 | UnsupportedFeature.Ipv6GatewayRouteTable | The feature of %s is not supported. | 您指定的閘道路由表暫不支援繫結該閘道執行個體。 | diagnosis |
| 400 | UnsupportedFeature.Ipv6Isp | The Ipv6Isp feature is not supported. | 指定的 Ipv6Isp 特性不支援。 | diagnosis |
| 400 | UnsupportedFeature.IpVersion | The ipversion type is not supported. | 輸入的 ipVersion 不支援。 | diagnosis |
| 400 | UnsupportedFeature.Isp | The feature of Isp is not supported. | 您指定的 Isp 暫未支援。 | diagnosis |
| 400 | UnsupportedFeature.ModifyIpv6RouteEntryNextHop | The current region does not support the feature of modifying the IPv6 route next hop. | 操作失敗，因為當前地域不支援修改 IPv6 路由下一跳。 | diagnosis |
| 400 | UnsupportedFeature.ModifyRouteEntryNextHop | The current region does not support the function of modifying the route next hop. | 當前地域不支援修改路由下一跳功能。 | diagnosis |
| 400 | UnsupportedFeature.MutilBindedTypeNatEnableFw | The NAT with Mutil-Binded Eip bind type is not support enable firewall. | 以 Mutil-Binded 方式繫結 EIP 的 NAT 不允許開啟防火牆。 | diagnosis |
| 400 | UnsupportedFeature.NatBandWidthPackage | The feature of NatBandWidthPackage is not supported. | 不支援建立 Nat 頻寬包。 | diagnosis |
| 400 | UnsupportedFeature.NatQosEntry | The specified natGateway can not support the qos entry feature. | 此 NAT 執行個體不支援保護性限速特性。 | diagnosis |
| 400 | UnsupportedFeature.NextHopType | The route type does not support modifying the next hop of the route. | 當前路由條目不支援修改下一跳資訊。 | diagnosis |
| 400 | UnsupportedFeature.NextHopType | The operation is not allowed because the NextHopType of specified RouteEntry is modified from Local type. | 操作不允許，因為路由的下一跳類型修改自 Local 類型。 | diagnosis |
| 400 | UnsupportedFeature.NormalNatModifyEipBindMode | The normal NAT gateway is not support to change EIP bond type. | 普通型 NAT 閘道不支援修改 EIP 繫結類型。 | diagnosis |
| 400 | UnsupportedFeature.NormalTypeNatGateway | Normal nat gateways do not support modifying the next hop of the route. | 指向普通類型 NAT 閘道的路由條目不支援修改下一跳。 | diagnosis |
| 400 | UnsupportedFeature.PrivateLinkMode | The feature of %s is not supported. | 暫不支援反向存取特性。 | diagnosis |
| 400 | UnsupportedFeature.ReservedType | The specified ReservedType is not supported. | 指定的 ReservedType 未支援。 | diagnosis |
| 400 | UnsupportedFeature.ReservedType | UnsupportedFeature.ReservedType | 您指定的 ReservedType 未支援，請根據請求參數規定重新輸入。 | diagnosis |
| 400 | UnsupportedFeature.RouterInterfaceIpv6 | The feature of ipv6 is not supported for the routerInterface. | 該路由器介面不支援 IPv6。 | diagnosis |
| 400 | UnsupportedFeature.RouterTableType | The type of router table is not supported. | 您指定的路由表類型不支援。 | diagnosis |
| 400 | UnsupportedFeature.RouterType | The feature of route type is not supported. | 您指定的路由表類型不支援。 | diagnosis |
| 400 | UnsupportedFeature.UserDefinedTrafficPath | The feature of UserDefinedTrafficPath is not supported. | 本使用者暫不支援自訂流日誌 trafficPath 功能。 | diagnosis |
| 400 | UnsupportedFeature.VpcAdvancedFeature | UnsupportedFeature.VpcAdvancedFeature | 您指定的 VSwitch 所在的 VPC 未支援進階特性，請更換其他 VSwitch 重試。 | diagnosis |
| 400 | UnsupportedFeature.VpcAdvancedFeature | The VPC does not support some advanced features. | 該 VPC 不支援某些進階功能，請提交工單處理。 | diagnosis |
| 400 | UnsupportedFeature.VpcDnsHostname | The feature of vpc dns hostname is unsupported. | VPC 私網網域名稱功能在當前地域不生效。 | diagnosis |
| 400 | UnsupportedFeature.VpcIpamIpv6 | The specified IPAM pool does not support the IPv6 feature. | 指定的 IPAM 位址池不支援 IPv6 功能。 | diagnosis |
| 400 | UnsupportedFeature.VpcNatSecurityProtectionEnabled | The VPC NAT gateway is not supported to enable security protection. | VPC NAT 閘道不支援開啟安全防護。 | diagnosis |
| 400 | UnsupportedFeature.Vpconn | The feature of Vpconn is not supported. | 不支援 Vpconn 類型。 | diagnosis |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | 此路由器介面對端是 VPC，此地域不支援建立此類型下一跳的 IPv6 路由。 | diagnosis |
| 400 | UnsupportedFeature.VSwitchIpv6 | The ipv6 feature of switch is not supported. | 指定的 VSwitch 未開啟 IPv6。 | diagnosis |
| 400 | UnsupportedFeature.VSwitchIpv6 | UnsupportedFeature.VSwitchIpv6 | 您指定的 VSwitch 未開啟 IPv6。 | diagnosis |
| UnsupportedParameter | 參數不合法。 | diagnosis | ||
| 400 | UnsupportedRegion | The feature of prefixList entry is not supported in this region. | 本地域不支援操作 prefixList 路由。 | diagnosis |
| 400 | UnsupportedRegion | The feature is not supported in current region. | 當前地域不支援該功能。 | diagnosis |
| 400 | UnsupportedRegion | The feature of ipv4Gateway is not supported in the region. | 該地域不支援 IPv4 閘道。 | diagnosis |
| 400 | UnsupportedRegion | UnsupportedRegion | 當前 Region 未支援該特性。 | diagnosis |
| 400 | UnsupportedRegion.CloudBoxInternet | The region does not support cloud box public network. | 該地域不支援雲盒公網。 | diagnosis |
| 400 | UnsupportedRegion.PrefixListEntry | The feature of prefixList entry is not supported in this region. | 該地域不支援 PrefixList 類型路由。 | diagnosis |
| 404 | UnsupportedZoneForFwNat | The zone is unsupported for FW NAT. | 該可用區不支援防護型 NAT 閘道。 | diagnosis |
| 400 | VBR.BANDWIDTH.EXCEED | VBR bandwidth exceed for this physical connection. | 頻寬超限。 | diagnosis |
| 400 | VbrBandwidthExceed | VBR bandwidth exceed for this physical connection. | 虛擬邊界路由器頻寬超過實體專線閾值。 | diagnosis |
| 400 | Vco.StatusNotSupport | The current VPN connection state does not support this operation. | 當前的執行個體狀態不支援該操作。 | diagnosis |
| 400 | Vco.StatusNotSupport | The current VCO status does not support operations such as modification and deletion. | 目前該 VCO 狀態不支援進行修改、刪除等操作。 | diagnosis |
| 400 | VLAN.ID.HAS.BEEN.USED.IN.PHYSICAL.CONNECTION | vlan id has been used in physical connection | vlan id 已經被使用。 | diagnosis |
| 400 | VpconnNotAssociatedVbr | The specified vpconn is not associated with vbr. | 輸入的共享實體專線沒有關聯虛擬邊界路由器。 | diagnosis |
| 400 | VpconnWithVlan0NotSupportShutdown | The specified virtualPhysicalConnection with vlan 0 does not support shutdown. | VLAN 0 的共享實體專線不支援進行故障演練。 | diagnosis |
| 400 | VpcRouteConflict | Route conflict exists in routing table. | 路由表中存在路由衝突。 | diagnosis |
| VpcStatusError | The Vpc is creating . | 正在建立 VPC。 | diagnosis | |
| 400 | VpcSubnet.NotFound | Vpc subnet not exist. | VPC 子網路不存在。 | diagnosis |
| 400 | VpnConnection.Configuring | The specified service is configuring. | 服務正在設定中，請您稍後再試。 | diagnosis |
| 400 | VpnConnection.FinancialLocked | The specified service is financial locked. | 指定的服務欠費鎖定。 | diagnosis |
| 400 | VpnConnection.InvalidCreateTunnelOptions | The master and slave tunnels must be created at the same time. | 主隧道和備隧道必須同時建立。 | diagnosis |
| 400 | VpnConnection.SameVpnAndCgwDifferentIkeConfigs | If the same VPN is not supported, different VPN connections are configured with different Ike configurations when the same customer gateway is used. | 不支援同一個 VPN 下，不同的 VPN 連線在使用相同的使用者閘道場景下，設定了不同的 IKE 設定。 | diagnosis |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs | IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration. | 偵測到多個 IPsec 連線關聯了相同的 VPN 閘道和使用者閘道，多個 IPsec 連線的預共用金鑰和 IKE 階段的設定參數需保持相同。 | diagnosis |
| 400 | VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap | Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap. | 偵測到多個 IPsec 連線關聯了相同的 VPN 閘道和使用者閘道，多個 IPsec 連線的感興趣流網段不能重疊。 | diagnosis |
| VpnGateway.Configuring | The specified service is configuring. | VPN 閘道正在設定中。 | diagnosis | |
| 500 | VpnGateway.Configuring | The specified VPN gateway is being configured. | VPN 閘道正在設定中。 | diagnosis |
| VpnGateway.FinancialLocked | The specified service is financial locked. | 該服務已欠費，請您先儲值再操作。 | diagnosis | |
| 400 | VpnGateway.IPsecServerAndVpnConnectionConflict | The IPSec connection and IPSec server cannot be configured on the same VPN gateway at the same time. | 一個 VPN 閘道不支援同時設定 IPSec 伺服端與 IPSec 連線。 | diagnosis |
| 400 | VpnGateway.IpsecVpnDisabled | The vpn gateway does not enable IPSec VPN. | VPN 閘道沒有開啟 IPsec VPN 功能。 | diagnosis |
| 400 | VpnGateway.SslVpnDisabled | The VPN gateway has not enabled SSL VPN. | VPN 閘道沒有開啟 SSL VPN 功能。 | diagnosis |
| 400 | VpnGateway.task.conflict | The VPN is in the configuration state, please wait a while before operating. | 該 VPN 處於正在設定狀態，請稍等一會再進行操作。 | diagnosis |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting pbr route entry priority. | 目前版本 VPN 閘道不支援策略路由優先順序功能。 | diagnosis |
| 400 | VpnPbrRouteEntryPriority.NotSupport | Current version of the VPN does not support setting custom pbr route entry priority. | 目前版本的 VPN 不支援設定策略路由條目優先順序。 | diagnosis |
| 400 | VpnRouteEntry.AlreadyExists | The specified route entry is already exist. | 該路由已存在。 | diagnosis |
| 400 | VpnRouteEntry.BackupRoute | Validate backup route entry failed. | 主備路由條目驗證失敗。 | diagnosis |
| 400 | VpnRouteEntry.Configuring | The specified route entry is configuring. | 指定的路由條目正在設定中。 | diagnosis |
| 400 | VpnRouteEntry.Conflict | The specified route entry has conflict. | 路由條目存在衝突。 | diagnosis |
| 400 | VpnRouteEntry.Conflict | The specified client IP pool conflicts with VPN connection or SSL server. | 指定的用戶端 IP 池與 VPN 連線或 SSL 伺服端衝突。 | diagnosis |
| 400 | VpnRouteEntry.ConflictSSL | The specified route entry has conflict with SSL client. | 路由條目與 SSL 用戶端衝突。 | diagnosis |
| 400 | VpnRouteEntry.InvalidWeight | Invalid route entry weight value. | 路由權重值不合法。 | diagnosis |
| 400 | VpnRouteEntry.SamePriorityPbrRoutePrefixOverlap | The source CIDR and destination CIDR of Policy-based routes with the same priority cannot overlap. | VPN 閘道不支援相同優先順序下的多個策略路由來源和目標網段同時重合。 | diagnosis |
| 400 | VpnRouteEntry.SrcDestConflict | The VPN gateway does not support Policy-based routing with the same source CIDR and destination CIDR. | 雙隧道類型的 VPN 閘道不支援設定來源網段與目標網段同時相同的策略路由。 | diagnosis |
| 400 | VpnRouteEntry.SrcDestWeightConflict | The VPN gateway does not support Policy-based routing with the same source CIDR, destination CIDR and weight. | VPN 閘道不支援設定來源網段、目標網段與權重同時相同的策略路由。 | diagnosis |
| 400 | VpnTask.CONFLICT | Vpn task has conflict. | VPN 操作存在衝突，請稍後重試。 | diagnosis |
| VpnUnderStock | There are not enough vpn gateways in stock | VPN 閘道庫存不足。 | diagnosis | |
| 404 | VRouterId.NotFound | The VRouter not found. | 此 VRouter 執行個體未找到。 | diagnosis |
| VswitchStatusError | The VSwitch is creating . | 交換機正在建立中。 | diagnosis | |
| ZONE_NO_AVAILABLE_IP | The Zone have no available ip. | 該可用區沒有可用 IP。 | diagnosis | |
| 400 | OperationDenied.UnSupportedBindTypeCloudInstance | Internet bandwidth cannot be allocated to the IPv6 address bound to the cloud service instance. | 繫結雲端服務類型執行個體的 IPv6 IP 不能開通公網頻寬。 | diagnosis |
| 400 | OperationDenied.TrafficMirrorServiceOpened | The operation is not allowed because the traffic mirror service has been opened. | 流量鏡像服務已開通，請勿重複操作。 | diagnosis |
| 400 | ResourceNotEnough.Ipv4Prefix | The resource of %s is not enough. | Ipv4Prefix 資源不足。 | diagnosis |
| 400 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | 資源 Ipv4Prefix 不存在。 | diagnosis |
| 400 | Mismatch.Ipv4PrefixAndCidrReservations | The %s and %s are mismatched. | Ipv4Prefix 和交換機預留網段不匹配。 | diagnosis |
| 400 | IllegalParam.NatIp | The param of %s is illegal. | 參數 NatIp 不合法。 | diagnosis |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal. | 參數 Ipv4Prefix 不合法。 | diagnosis |
| 400 | ResourceAlreadyAssociated.Ipv4Prefix | %s is already associated. | Ipv4Prefix 已經被分配。 | diagnosis |
| 400 | ResourceAlreadyAssociated.NatIp | The resource of %s was already associated. | NatIp 資源已經被分配。 | diagnosis |
| 400 | MissingParam.DhcpOptionsSetId | Missing parameter DhcpOptionsSetId. | 缺失參數 DhcpOptionsSetId。 | diagnosis |
| 400 | UnsupportedFeature.RouteTargetGroup | The feature of RouteTargetGroup is not supported. | 當前地域不支援路由目標組功能。 | diagnosis |
| 400 | ResourceNotFound.RouteTargetGroup | The specified resource of %s is not found. | 指定資源 %s 不存在。 | diagnosis |
| 400 | MissingParam.MinRxInterval | The parameter MinRxInterval is mandatory. | 缺少參數 MinRxInterval。配置 BFD 報文的時候需要同時配置傳送間隔、接收間隔和檢測時間倍數三個參數。 | diagnosis |
| 400 | MissingParam.MinTxInterval | The parameter MinTxInterval is mandatory. | 缺少參數 MinTxInterval。配置 BFD 報文的時候需要同時配置傳送間隔、接收間隔和檢測時間倍數三個參數。 | diagnosis |
| 400 | MissingParam.DetectMultiplier | The parameter DetectMultiplier is mandatory. | 缺少參數 DetectMultiplier。配置 BFD 報文的時候需要同時配置傳送間隔、接收間隔和檢測時間倍數三個參數。 | diagnosis |
| 400 | OperationFailed.ResourceNotEnough | Insufficient resources. | 您申請的資源不足，如仍需申請，請提工單處理。 | diagnosis |
| 404 | ResourceNotFound.Ipv4Prefix | The resource of s% is not found. | 資源 Ipv4Prefix 不存在。 | diagnosis |
| 400 | IllegalParam.Ipv4Prefix | The param of s% is illegal, must be /28 network segment. | Ipv4Prefix 參數不合法，必須為 /28 網段。 | diagnosis |
| 400 | DependencyViolation.Ipv4Prefix | The specified resource of %s depends on %s, so the operation cannot be completed. | NatIp 隸屬於 Ipv4Prefix 不能單獨刪除，請直接刪除 Ipv4Prefix。 | diagnosis |
| 400 | IllegalParam.Ipv4Prefix | The param of %s is illegal, must be /28 network segment. | 參數 Ipv4Prefix 不合法，必須為 /28 網段。 | diagnosis |
| 400 | DependencyViolation.SnatEntry | The specified resource of %s depends on %s, so the operation cannot be completed. | 該共用頻寬包有未刪除的 SNAT 或 DNAT 表項，請您先刪除 SNAT 或 DNAT 表項再進行操作。 | diagnosis |
| 404 | ResourceNotFound.Ipv4Prefix | The specified resource of %s is not found. | 資源 Ipv4Prefix 未找到，請檢查該 Ipv4Prefix 是否存在。 | diagnosis |
| 400 | ResourceAlreadyExist.Ipv4Prefix | The specified resource of %s is already exist. | 已經建立過該 Ipv4Prefix，請勿重新建立。 | diagnosis |
| 400 | OperationDenied.ConfigWithSameAz | The operation is not allowed because of all config in the same availableZone. | 路由目標組配置執行個體禁止屬於同一個可用區。 | diagnosis |
| 400 | OperationDenied.DiffInstanceType | The operation is not allowed because of %s. | 路由目標組配置的執行個體類型必須相同。 | diagnosis |
| 400 | Mismatch.GroupVpcIdAndInstanceVpcId | The RouteTargetGroup VPC %s and the RouteTargetConfig VPC %s are mismatched. | 路由目標組所屬的 VPC 和路由目標配置執行個體所屬的 VPC 不一致。 | diagnosis |
| 400 | OperationDenied.UpdateEnableRouteTargetConfig | The operation is not allowed because of The RouteTargetConfig which is in Enable status can not be update. | 禁止更新路由目標組中處於使能狀態的成員。 | diagnosis |
| 400 | IncorrectStatus.RouteTargetGroup | The status of %s [%s] is incorrect. | 路由目標組當前狀態禁止操作。 | diagnosis |
| 400 | OperationDenied.UpdateConfigInstanceType | The operation is not allowed because of can not update instance type. | 禁止更新路由目標組成員中的執行個體類型。 | diagnosis |
| 400 | IncorrectStatus.TransitRouter | The status of transit router is not stable, so the operation cannot be completed. | VPC 關聯的資源正在變配中，如雲端企業網等，稍後重試。 | diagnosis |
| 400 | OperationDenied.NotSupportBondEniAsTrafficMirrorSource | The operation is not allowed because bond eni cannot be the source of traffic mirror. | 不允許託管網卡作為流量鏡像的來源。 | diagnosis |
| 400 | InvalidRouteEntry.NotFound | vpc route entry not exist. | VPC 路由表項不存在。 | diagnosis |
| 400 | OperationDenied.ExistVbrInPhysicalConnection | It cannot be deleted when VBR exists. | 實體連接埠下存在邊界路由器時不允許刪除。 | diagnosis |
| 400 | OperationDenied.NeedVpconnOwnerOrPconnOwner | The deletion failed. Only the owner of virtual physical connection or physical connection can delete it. | 刪除失敗，需要共用連接埠或獨享連接埠的使用者去刪除。 | diagnosis |
| 400 | OperationDenied.PhysicalConnectionNotSupportMPBGPAndMPBGP-v6 | The operation is not allowed because this physical connection not support MPBGP and MPBGP-v6. | 不允許執行該操作，因為當前實體連接埠不支援 MPBGP 和 MPBGP-v6 等進階能力。 | diagnosis |
| 400 | OperationDenied.QuotaExceededWithNetworkAcl | If the prefix list increases MaxEntries, the quota for the maximum number of entries for the associated network ACL instance %s is exceeded. | 如果前綴列表提升了最大條目數，會超過關聯的網路 ACL 執行個體的最大條目數的配額。 | diagnosis |
| 400 | OperationDenied.IpVersionInconsistencyWithPrefixList | The ip version of the prefix list %s you passed in is inconsistent with the actual ip version of the prefix list. | 您傳入參數的前綴列表的 IP 版本和該前綴列表的實際 IP 版本不一致。 | diagnosis |
| 400 | OperationFailed.InstanceNotSupport | natgateway not support ipv4prefix. | 閘道不支援 Ipv4Prefix。 | diagnosis |
| 400 | QuotaExceeded.Ipv4Prefix | The quota of %s is exceeded, usage %s/%s. | Ipv4Prefix 的配額使用溢出。 | diagnosis |
| 400 | QuotaExceeded.NatIp | The quota of %s is exceeded, usage %s/%s. | NatIp 和 Ipv4Prefix 配額使用溢出。 | diagnosis |
| 400 | MissingParam.RelationKey | The parameter RelationKey is mandatory. | 參數 RelationKey 缺失。 | diagnosis |
| 400 | OperationDenied.ZoneIsRetiring | The specified zone is being retired. You cannot create a vSwitch in a retiring zone. | 當前可用區正在裁撤，禁止在裁撤可用區建立交換機。 | diagnosis |
| 400 | OperationDenied.MemberWithSameAz | The operation is not allowed because of all members being in the same availability zone. | 路由目標組成員執行個體禁止屬於同一個可用區。 | diagnosis |
| 400 | OperationDenied.UpdateMemberType | The operation is not allowed because of the inability to update memberType. | 禁止更新路由目標組成員中的執行個體類型。 | diagnosis |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetConfig when it is in the enabled state. | 禁止更新路由目標群組中已使能的成員。 | diagnosis |
| 400 | OperationDenied.NetworkAclAttachmentInMiddleStatus | The network ACL is being bound to or unbound from the switch. | 網路 ACL 正在與交換機綁定中或者解綁中。 | diagnosis |
| 400 | OperationDenied.ZoneIsDisabled | The specified zone is disabled. You cannot create a vSwitch in a disabled zone. | 當前可用區已被禁用，不允許建立交換機。 | diagnosis |
| 400 | OperationDenied.UpdateEnableRouteTargetMember | The operation is not allowed because of the inability to update the RouteTargetMember when it is in the enabled state. | 禁止更新路由目標群組中已使能的成員。 | diagnosis |
| 400 | OperationDenied.SwitchToAbnormalMember | The operation is not allowed because of the inability to switch the RouteTargetMember when the disabled member is in an unhealthy state. | 未使能成員處於健康檢查異常狀態時，禁止執行主備切換操作。 | diagnosis |
| 400 | InvalidRegionId.NotFound | The regionId provided does not exist in our records. | 指定的 RegionId 不存在。請檢查該參數是否正確。 | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified RegionId is not found. | 指定的 RegionId 不存在，請您檢查此產品在該地域是否可用。 | diagnosis |
| 400 | IncorrectClassicLinkStatus | Specified VPC classicLink enabled. | 該 VPC 已經開啟 ClassicLink。 | diagnosis |
| 400 | DependencyViolation.Instance | ClassicLink Instances exist in VPC. | 當前 VPC 還存在未刪除的雲端產品執行個體，VPC 刪除失敗。 | diagnosis |
| 400 | InvalidRegionId.NotFound | The specified RegionId does not exist. | 指定的地域不存在。請檢查該參數是否正確。 | diagnosis |
| 400 | IncorrectRouteTableStatus | The current status of the route table does not support this operation. | 目前路由表的狀態不支援刪除操作。 | diagnosis |
| 400 | InvalidRouterId.AttacedToCEN | Can not create ri when attaced to CEN. | ri不能附加cen。 | diagnosis |
| 400 | InvalidRegionId.NotFound | The parameter wrong, pageNum or pageSize. | 參數錯誤。 | diagnosis |
| 400 | DependencyViolation.VSwitchCidrReservation | VSwitch cannot be deleted when vswitch cidr reservation exist. | 該 VSwitch 存在 VSwitchCidrReservation 使用中，不允許刪除。 | diagnosis |
| 400 | Forbidden.RegionNotFound | Specified instance is not found during access authentication. | 當前Region不支援。 | diagnosis |
| 400 | OperationUnsupported.SystemRouteTable | System route table can not be unassociated. | 無法解除系統路由表的關聯。 | diagnosis |
| 400 | OperationFailed.RouteConflict | Operation failed because a specified route entry is already exist. | 操作與已存在的路由衝突，操作失敗。 | diagnosis |
| 400 | OperationFailed.ServiceManaged | Operation is forbidden because this instance belongs to Service manager. | 託管執行個體不允許進行該操作。 | diagnosis |
| 400 | QuotaExceeded.RouteTargetGroup | The quota of %s is exceeded, usage %s/%s. | 已超出 VPC 內支援建立的路由目標群組最大數量，請提升配額後操作。 | diagnosis |
| 400 | UnsupportedFeature.UserDefinedTrafficPathIpv6 | Dual-stack flow log instances do not support custom trafficPath. | 雙棧流日誌執行個體暫不支援自訂 trafficPath 功能。 | diagnosis |
| 400 | OperationFailed.TokenExpired | The operation is failed because of TokenExpired. | 指定的 eip 分配 token 已過期。 | diagnosis |
| 400 | OperationDeny.VbrWithVlan0 | The specified VirtualBorderRouter with vlan 0 does not support shutdown. | 輸入的 VBR 的 VLAN 為 0，不支援進行故障演練，請使用實體專線進行故障演練。 | diagnosis |
| 400 | ExclusiveParam.AccessIpAndAccessDomain | The specified AccessIp and AccessDomain are mutually exclusive. | 指定的入參 AccessIp 和 AccessDomain 存在衝突。 | diagnosis |
| 400 | IllegalParam.AccessDomain | The request parameter AccessDomain is illegal. | 請求參數中 AccessDomain 參數不合法。 | diagnosis |
| 400 | DependencyViolation.IpsecServer | There is Ipsec VPN server on specified vpn gateway not deleted. | 該資源無法被刪除，因為該資源下有 IPsec 伺服端依賴。 | diagnosis |
| 400 | VpnPbrRouteEntry.NotSupport | Current version of the VPN does not support pbr route entry. | 當前 VPN 執行個體不支援策略路由。 | diagnosis |
| 400 | OperationUnsupported.LargeTunnelBandwidth | Large tunnelBandwidth VpnAttachment is unsupported. | 不支援建立大頻寬的 VpnAttachment。 | diagnosis |
| 400 | IllegalParam.TunnelBandwidth | TunnelBandwidth is illegal. | TunnelBandwidth 參數非法。 | diagnosis |
| 400 | EncAlgInvalid.DesIncompatible | Des/3des in IkeEncAlg and IpsecEncAlg does not support multi algorithm. | Ike 加密演算法以及 IPsec 加密演算法中，des/3des 不支援多演算法相容。 | diagnosis |
| 400 | CustomerGateway.ConflictVpnIp | The specified customer gateway has conflict with vpn gateway ip. | IPSec 連線關聯的使用者閘道與 VPN 閘道不應該有相同的閘道 IP 位址。 | diagnosis |
| 400 | IkeVersionInvalid.GcmIncompatible | Ikev1 does not support IkeEncAlg of gcm16. | Ikev1 不支援 IKE 加密演算法僅配置 gcm16 演算法。 | diagnosis |
| 400 | IncorrectStatus.PhysicalConnection | The status of %s [%s] is incorrect. | 實體專線的狀態不支援此操作。 | diagnosis |
| 400 | UnsupportedFeature.Macsec | The feature of Macsec is not supported. | 當前實體專線不支援 MACSec 特性。 | diagnosis |
| 400 | UnsupportedFeature.Macsec.CipherSuit | The feature of Macsec.CipherSuit is not supported. | 當前實體專線支援 MACSec，但是不支援選擇的加密演算法。 | diagnosis |
| 400 | IncorrectStatus.PconnMacsec | The status of %s [%s] is incorrect. | 不允許進行操作因為有 MACSec 密鑰處於非穩態。 | diagnosis |
| 400 | QuotaExceeded.PconnMacsec | The quota of PconnMacsec is exceeded, usage 3/3. | 一條實體專線最多支援綁定 3 組 MACSec 密鑰。 | diagnosis |
| 400 | ResourceNotFound.PconnMacsec | The specified resource of %s is not found. | 需要解綁的 Ckn 不存在。 | diagnosis |
| 400 | UnsupportedFeature.Macsec.CipherSuite | The feature of Macsec.CipherSuite is not supported. | 當前實體專線支援 MACSec，但是不支援選擇的加密演算法。 | diagnosis |
| 400 | OperationDenied.MacsecAttached | The operation is not allowed because of MacsecAttached. | 當前操作被拒絕因為實體專線上還有 MACSec 密鑰綁定中。 | diagnosis |
| 400 | DependencyViolation.RouteEntry | RouteEntry %s depends on the resource %s. | 目前 VPC 還存在未刪除的自訂路由規則，VPC 刪除失敗。 | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorSessionTarget | The status of the target of the traffic mirror session is incorrect. | 流量鏡像工作階段的目的的狀態不正確。 | diagnosis |
| 400 | IncorrectStatus.TrafficMirrorSessionSource | Incorrect status for source of traffic mirror session. | 流量鏡像工作階段的來源的狀態不正確。 | diagnosis |
| 400 | OperationUnsupported.EipNatGWCheck | The operation failed because the EIP is not bound to this NAT Gateway. | 操作失敗，因為 EIP 未綁定到此 NAT Gateway。 | diagnosis |
| 400 | OperationFailed.SnatIpPoolCbwpRules | The operation failed because the SNAT rule IPs are added to multi bandwidth packages. | 操作失敗，因為 SNAT 規則 IP 位址池被新增到多個頻寬包。 | diagnosis |
| 400 | IncorrectStatus.SnatEntry | The SNAT rule status is invalid. Please try again later. | SNAT 規則處於中間態，或狀態異常。請稍後重試。 | diagnosis |
| 400 | IncorrectStatus.NatIp | NatIp status is invalid, please try again later. | NatIp 處於中間態，請稍後重試。 | diagnosis |
| 400 | OperationUnsupported.EipNatIpCheck | The operation failed because the EIP is not bound to this NAT gateway. | 操作失敗，因為 EIP 未綁定此 NAT 閘道。 | diagnosis |
| 400 | OperationFailed.SnatIpPoolBwpRules | The operation failed because the IP in Snat entryl was added to multiple NAT bandwidth packets. | 操作失敗，因為 Snat 規則 IP 位址池中的 IP 被新增到多個 NAT 頻寬包。 | diagnosis |
| 400 | OperationUnsupported.EnhancedRegion | Region not support. | 目前地域暫時不支援。 | diagnosis |
| 400 | OperationFailed.CreateNatGateway | Failed to create the NAT gateway. | 建立 NAT 閘道失敗。 | diagnosis |
| 400 | IncorrectStatus.RouteTableStatus | The route table status is invaild. Please try again later. | 路由表狀態暫不支援此操作。請稍後重試。 | diagnosis |
| 400 | ZoneUnsupported.FullNatDomain | The current zone does not support the configuration of the FullNat rule domain name. | 目前可用區不支援設定 FullNat 規則網域名稱形式。 | diagnosis |
| 400 | InstanceUnsupported.FullNatDomain | The current instance does not support the configuration of the FullNat rule domain name. | 目前執行個體不支援設定 FullNat 規則網域名稱形式。 | diagnosis |
| 400 | OrderError.BasicInfoUncompleted | Order basic parameter is not completed. | 訂單錯誤，基礎參數資訊未完成。 | diagnosis |
| 400 | OrderError.NoAvailablePaymentMethod | Order payment parameter is not available. | 訂單錯誤，付費類型參數不可用。 | diagnosis |
| 400 | OperationUnsupported.EnhancedCURegion | Operation failed because of this region not unsupported. | 因不支援隨用隨付計費地域引起操作失敗。 | diagnosis |
| 400 | OperationUnsupported.User | The current user does not support this operation. | 目前使用者不支援此操作。 | diagnosis |
| 400 | Instance.NotFound | instance not found. | 執行個體不存在，或不屬於目前使用者。 | diagnosis |
| 400 | OperationFailed.SnatIpsCheck | The operation fails because some IPs address in the SNAT entry are not added to common bandwidth packet. | 操作失敗，因為 Snat 規則 IP 位址池中存在 IP 位址未新增共用頻寬包。 | diagnosis |
| 400 | NatInstance.NotFound | Instance not found. | 執行個體不存在，或不屬於目前使用者。 | diagnosis |
| 400 | OperationUnsupported.Region | Operation unsupport this region parameter. | 此操作不支援地域參數。 | diagnosis |
| 400 | OperationUnsupported.QueryCurrentMonthTraffic | The operation is not allowed because current month traffic query is not supported under 95 billing mode. | 不支援在 95 計費模式下查詢當月流量資料。 | diagnosis |
| 400 | OperationFailed.MalformedPolicyDocument | The policy format is invalid. | 鑑權策略格式異常。 | diagnosis |
| 400 | OperationFailed.ResourceLockedBySystem | The specified resource is locked by system. | 操作的資源已經被系統鎖定，暫時無法操作。 | diagnosis |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | The combination of parameters is incorrect. ipv6only can only be used when the ipv4CidrBlock parameter is not set. | 參數衝突，設定 IPv4 網段後不支援指定建立 IPv6 單棧交換機。 | diagnosis |
| 400 | InvalidParameter.SingleZone | Operation failed because current user not support create single zone nat. | 目前使用者不允許建立單 az nat。 | diagnosis |
| 400 | OperationDenied.AttachedToECR | The operation is not allowed because the VPC is attached to ECR %s. | VPC 關聯到了專線閘道 %s，不允許刪除。 | diagnosis |
| 400 | InvalidParameter.DeviceAdvancedCapacity | Invalid physical connection device advanced capacity. | 連接埠進階能力暫時不支援，請確認後重試。 | diagnosis |
| 400 | OperationFailed.Ipv4GatewayNotAssociatedWithGatewayRouteTable | The operation failed because the specified IPv4 gateway of the VPC is not associated with any gateway route table. | EIP 綁定的 IP 位址對應的 VPC IPv4 閘道未綁定任何閘道路由表。 | diagnosis |
| 400 | InvalidParam.RouterId | The parameter value cannot be null. | 路由器介面關聯的路由器 ID 不能為空，請檢查後重試。 | diagnosis |
| 400 | OperationDenied.RouterInterfaceStatusNotAllowed | The operation is not allowed because of RouterInterfaceStatusNotAllowed. | 路由器介面狀態異常。 | diagnosis |
| 400 | OperationFailed.InvalidRouterType | The operation is failed because of %s. | 無效的路由器類型。 | diagnosis |
| 400 | VpnDependencyViolation.VpnConnection | There are vpn connections on specified vpn gateway not deleted. | 指定的 VPN 閘道上有 vpn 連線未刪除。 | diagnosis |
| 400 | OperationDenied.CidrMaskTooSmall | The operation is denied because the CIDR mask %s is less than the allocationMinNetmask %s of the pool. | 參數 Cidr 的遮罩或參數 CidrMask 小於位址池合規規則中的最小網路遮罩長度。 | diagnosis |
| 400 | OperationDenied.CidrMaskTooLarge | The operation is denied because the CIDR mask %s is larger than the allocationMaxNetmask %s of the pool. | 參數 Cidr 的遮罩或參數 CidrMask 超過了位址池合規規則中的最大網路遮罩長度。 | diagnosis |
| 400 | OperationDenied.ExistsInRouteTargetGroup | NatGateway cannot close icmp reply, because this nat gateway exists in route target group. | NAT 閘道被路由目標群組參考，禁止關閉 ICMP 代答功能。 | diagnosis |
| 400 | DependencyViolation.RouteTargetGroup | There are route target group on the NatGateway. please delete it first. | 目前 NAT 閘道存在路由目標群組參考，請先刪除。 | diagnosis |
| 400 | OperationFailed.Ipv6AddressNotBind | The specified next hop has no IPv6 address. | IPv6 路由的下一跳沒有 IPv6 位址。 | diagnosis |
| 400 | OperationDenied.NatGatewayNotSingleAZ | NAT gateway must be in SingleAZ mode. | 路由目標群組僅支援單 AZ 類型的 NAT 閘道。 | diagnosis |
| 400 | OperationDenied.NatGatewayIcmpReplyDisabled | NAT gateway ICMP reply is disabled. | 路由目標群組中的 NAT 閘道必須開啟 ICMP 代回功能，確保 ICMP 探測封包可被正常回應。 | diagnosis |
| 400 | UnsupportedFeature.RouteTargetGroupForNat | This region currently does not support NAT gateways as route target group members. | 該地域暫不支援將 NAT 閘道作為路由目標群組成員。 | diagnosis |
| 400 | ResourceNotFound.NatGateway | The selected NAT gateway was not found when creating or modifying the route target group. | 建立或修改路由目標群組時，未發現所選的 NAT 閘道資源。 | diagnosis |
| 400 | ResourceNotFound.NatGatewayVSwitch | The VSwitch information associated with the selected NAT gateway was not found. | 未找到所選 NAT 閘道關聯的 VSwitch 資訊。 | diagnosis |
| 400 | OperationDenied.IllegalRouteTargetGroupMemberType | This operation does not support route target groups with NAT gateway members. | 目前操作不支援成員為 NAT 閘道類型的路由目標群組。 | diagnosis |
| 400 | OperationFailed.IpNotExist | The specified IP address does not exist. | IP 不存在。 | diagnosis |
| 400 | MissingParam.EcrInstanceId | The param of EcrInstanceId is missing. | 參數 EcrInstanceId 缺失。 | diagnosis |
| 400 | InvalidParam.OwnerId | The OwnerId parameter is invalid. | 參數 OwnerId 無效，請確認參數是否正確後重試。 | diagnosis |
| 400 | Throttling.DeepPageSkip | Deep page skip throttled. Please reduce the page skip frequency or use sequential pagination. | 深分頁跳頁次數已觸發限流。請降低深翻頁跳頁的頻率，或使用順序分頁。 | diagnosis |
| 400 | Conflict.VSwitchCidrReservationParam | IpPrefixNumber cannot be used together with VSwitchCidrReservationCidr or VSwitchCidrReservationMask. | IpPrefixNumber 不能與 VSwitchCidrReservationCidr 或 VSwitchCidrReservationMask 同時使用。 | diagnosis |
| 400 | MissingParam.VSwitchCidrReservationParam | One of IpPrefixNumber, VSwitchCidrReservationMask, or VSwitchCidrReservationCidr must be specified. | IpPrefixNumber、VSwitchCidrReservationMask 或 VSwitchCidrReservationCidr 中必須指定一個。 | diagnosis |
| 400 | IllegalParam.ReservedType | IpPrefixNumber is only supported with Prefix reserved type. | IpPrefixNumber 僅在 Prefix 預留類型下支援。 | diagnosis |
| 400 | InvalidVSwitchId.SecondVswitchNotSupport | The zone of the DisasterRecoveryVSwitch does not support creating a ha-tunnel VPN. | 備可用區虛擬交換器所在可用區不支援建立雙隧道 VPN，請更換虛擬交換器。 | diagnosis |
| 400 | MissingParam.DisasterRecoveryVSwitchId | The parameter DisasterRecoveryVSwitchId is missing. | 參數 DisasterRecoveryVSwitchId 缺失。 | diagnosis |
| 400 | InvalidDisasterRecoveryVSwitchId.NotFound | The specified DisasterRecoveryVSwitchId does not exist in the specified region. | 該交換機在該地域內不存在。 | diagnosis |
| 400 | CustomerGateway.AsnNotConfigured | ASN of CustomerGateway is required when enabling BGP on an IPSec connection. | IPSec 連線開啟 BGP 時，需要使用者閘道上設定 ASN。 | diagnosis |
| 404 | InvalidPbrRouteEntry.NotFound | The specified PBR route entry does not exist. | 指定的策略路由不存在。 | diagnosis |
| 400 | OperationDenied.CidrBlockOverlapped | The operation is not allowed because the target CIDR block overlaps with %s. | 操作被拒絕，擴大後的目標網段與 VPC 的現有網段 %s 重疊。 | diagnosis |
| 400 | OperationDenied.TargetCidrAndOriginalCidrNotOverlap | The operation is not allowed because the target CIDR block and the original CIDR block do not overlap. | 操作被拒絕，目標網段與原始網段沒有重疊，網段調整要求兩者存在重疊關係。 | diagnosis |
| 400 | MissingParam.CidrBlockOrSecondaryCidrBlock | The param of CidrBlockOrSecondaryCidrBlock is missing. | 缺少必要參數，CidrBlock 和 SecondaryCidrBlock 至少需要指定一個。 | diagnosis |
| 400 | OperationDenied.CidrBlockInUse | The operation is not allowed because the target CIDR block is in use by existing vSwitch(es) %s. | 操作被拒絕，縮小後的目標網段未覆蓋現有交換器網段 %s。 | diagnosis |
| 400 | OperationDenied.OriginalCidrAndTargetCidrSame | The operation is not allowed because the original CIDR block and the target CIDR block are the same. | 操作被拒絕，目標網段與原始網段相同，無需修改。 | diagnosis |
| 400 | MissingParam.NewSecondaryCidrBlock | The param of NewSecondaryCidrBlock is missing. | 修改附加網段時必須指定 NewSecondaryCidrBlock 參數。 | diagnosis |
| 400 | OperationDenied.SecondaryCidrBlockNotFound | The operation is not allowed because the specified secondary CIDR block is not found in the VPC. | 操作被拒絕，指定的附加網段在目前 VPC 中不存在。 | diagnosis |
| 400 | ParamExclusive.CidrBlockAndSecondaryCidrBlock | The param of CidrBlock and SecondaryCidrBlock are mutually exclusive. | 參數 CidrBlock 和 SecondaryCidrBlock 互斥，不能同時指定。 | diagnosis |
| 400 | CreatePconnFailed.AdvancedCapacity | Create physical connection failed, no devices match the advanced capacity requirements. | 建立實體專線失敗，沒有符合裝置進階能力的接入裝置。 | diagnosis |
| 400 | CreatePconnFailed.OpticalModule | Create physical connection failed, no devices match the optical module requirements. | 建立實體專線失敗，沒有符合輸入的光模組的接入裝置。 | diagnosis |
| 400 | CreatePconnFailed.RedundantPconnId | Create physical connection failed, no devices available after excluding redundant device. | 建立實體專線失敗，沒有排除冗餘專線後符合條件的接入裝置。 | diagnosis |
| 400 | ParamExclusive.CidrBlockAndIpv6Only | CidrBlock is mutually exclusive with Ipv6Only. | Ipv6Only 模式下不允許指定 CidrBlock 或 CidrMask。 | diagnosis |
| 400 | Mismatch.ParamIpv6IspAndIpamPoolIpv6Isp | The specified IPv6 ISP %s does not match the IPAM pool's IPv6 ISP %s. | 指定的 IPv6 營運商 %s 與 IPAM 位址池的 IPv6 營運商 %s 不符。 | diagnosis |
| 400 | OperationDenied.Ipv6CidrBlockAndMaskMutuallyExclusive | Ipv6CidrBlock and Ipv6CidrMask are mutually exclusive. | Ipv6CidrBlock 和 Ipv6CidrMask 不能同時指定。 | diagnosis |
| 400 | OperationDenied.Ipv6CidrMaskInvalid | The operation is not allowed because of %s. | 指定的 IPv6 遮罩不合法，僅支援 %s。 | diagnosis |
| 400 | MissingParam.CidrBlockOrCidrMask | Either CidrBlock or CidrMask must be specified. | 必須指定 CidrBlock 或 CidrMask 中的至少一個。 | diagnosis |
| 400 | MissingParam.Ipv6CidrBlockOrIpv6CidrMask | Either Ipv6CidrBlock or Ipv6CidrMask must be specified. | 必須指定 Ipv6CidrBlock 或 Ipv6CidrMask 中的至少一個。 | diagnosis |
| 400 | OperationDenied.AvailableCidrInsufficient | No available CIDR block can be allocated from the VPC. | VPC 沒有可用的 CIDR 空間可供分配。 | diagnosis |
| 400 | OperationDenied.CidrBlockAndMaskMutuallyExclusive | CidrBlock and CidrMask are mutually exclusive. | CidrBlock 和 CidrMask 不能同時指定。 | diagnosis |
| 400 | OperationDenied.HasSecondaryZone | VSwitch has secondary zone can not operate IPv6. | 交換器存在備可用區時不允許操作 IPv6。 | diagnosis |
| 400 | OperationDenied.OriginalCidrNotFound | The specified original CIDR block is not the primary or secondary CIDR block of the VPC. | 指定的原始網段不是 VPC 的主網段或附加網段。 | diagnosis |
| 400 | IncorrectBusinessStatus.PhysicalConnection | Invalid physical connection business status. | 實體專線目前業務狀態不支援操作。 | diagnosis |
| 400 | UnsupportedFeature.DownDelayTime | DownDelayTime is not supported for VirtualPhysicalConnection. | 共用專線不支援設定狀態切換延遲命令。 | diagnosis |
| 400 | InvalidParam.DownDelayTime | The DownDelayTime value is invalid. | 狀態切換延遲參數值非法。 | diagnosis |
| 400 | UnsupportedFeature.LinkDelay.Device | The access device does not support LinkDelay configuration. | 接入設備不支援 LinkDelay 特性。 | diagnosis |
| 400 | UnsupportedFeature.LinkDelay | The feature of LinkDelay is not supported. | 狀態切換延遲命令暫不支援。 | diagnosis |
| 400 | UnsupportedFeature.LinkDelay.Region | LinkDelay feature is not enabled in region. | 當前地域未開啟狀態切換延遲命令特性開關。 | diagnosis |
| 400 | Forbidden.MinimumHoldingPeriod | The EIP is within its minimum holding period. | Local ISP 的必須在建立 30 天後才能釋放，如您要刪除請在 30 天後再操作。 | diagnosis |
| 400 | QuotaExceeded.PoolIpQuantity | The quota of %s is exceeded, usage %s/%s. | 位址池 IP 數量配額超限，如需要提升配額請提工單或聯繫您的客戶經理。 | diagnosis |
| 400 | QuotaExceeded.EipQuota | The quota of %s is exceeded, usage %s/%s. | Eip 數量配額超限，如需要提升配額請提工單或聯繫您的客戶經理。 | diagnosis |
该文章对您有帮助吗？