CreateCenInterRegionTrafficQosQueue - Cloud Enterprise Network - Alibaba Cloud ドキュメントセンター

Creates queues in a quality of service (QoS) policy to manage network traffic based on finer granularities, improve service performance, and meet service-level agreements (SLAs).

Operation description

The CreateCenInterRegionTrafficQosQueue operation is an asynchronous operation. After you send a request, the system returns a request ID and runs the task in the background. You can call the ListCenInterRegionTrafficQosPolicies operation to query the status of the QoS policy to determine the status of the queue. When you call this operation, you must set the TrafficQosPolicyId parameter.

If a QoS policy is in the Modifying state, the queue is being created. In this case, you can query the QoS policy and queue but cannot perform other operations.
If a QoS policy is in the Active state, the queue is created.

Try it now

Try this API in OpenAPI Explorer, no manual signing needed. Successful calls auto-generate SDK code matching your parameters. Download it with built-in credential security for local usage.

Test

RAM authorization

The table below describes the authorization required to call this API. You can define it in a RAM policy. The table's columns are detailed below:

Action: The actions can be used in the Action element of RAM permission policy statements to grant permissions to perform the operation.
API: The API that you can call to perform the action.
Access level: The predefined level of access granted for each API. Valid values: create, list, get, update, and delete.
Resource type: The type of the resource that support authorization to perform the action. It indicates if the action supports resource-level permission. The specified resource must be compatible with the action. Otherwise, the policy will be ineffective.
- For APIs with resource-level permissions, required resource types are marked with an asterisk (*). Specify the corresponding ARN in the Resource element of the policy.
- For APIs without resource-level permissions, it is shown as All Resources. Use an asterisk (*) in the Resource element of the policy.
Condition key: The condition keys defined by the service. The key allows for granular control, applying to either actions alone or actions associated with specific resources. In addition to service-specific condition keys, Alibaba Cloud provides a set of common condition keys applicable across all RAM-supported services. For more information, see Common condition keys.
Dependent action: The dependent actions required to run the action. To complete the action, the RAM user or the RAM role must have the permissions to perform all dependent actions.

Action

Access level

Resource type

Condition key

Dependent action

cen:CreateCenInterRegionTrafficQosQueue

create

*All Resource

*

None

Request parameters

Parameter	Type	Required	Description	Example
ClientToken	string	No	The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters. Note If you do not specify this parameter, the system automatically uses the request ID as the client token. The request ID may be different for each request.	123e4567-e89b-12d3-a456-426****
DryRun	boolean	No	Specifies whether to perform a dry run. Valid values: true: performs a dry run. The system checks the required parameters, the request format, and the service limits. If the request fails the dry run, an error message is returned. If the request passes the dry run, the `DryRunOperation` error code is returned. false (default): performs a dry run and sends the request.	false
QosQueueName	string	No	The name of the queue. The name can be empty or 1 to 128 characters in length, and cannot start with http:// or https://.	nametest
QosQueueDescription	string	No	The description of the queue. This parameter is optional. If you enter a description, it must be 1 to 256 characters in length and cannot start with http:// or https://.	desctest
RemainBandwidthPercent	string	No	The maximum percentage of inter-region bandwidth that can be allocated to the queue. Unit: percentage. For example, a value of 20 specifies that the queue can consume at most 20% of inter-region bandwidth. The sum of the percentage values specified for all queues that belong to the same inter-region connection cannot exceed 100%.	20
Bandwidth	integer	No	The maximum absolute bandwidth value that can be allocated to the queue. Unit: Mbit/s. The value specifies an absolute bandwidth. For example, a value of 20 specifies that the queue can consume at most 20 Mbit/s of bandwidth. The sum of the bandwidth values specified for all queues that belong to the same inter-region connection cannot exceed the maximum bandwidth of the inter-region connection.	20
TrafficQosPolicyId	string	Yes	The ID of the QoS policy.	qos-qdvybn468kaoxx****
Dscps	array	Yes	The differentiated services code point (DSCP) value that matches the current queue. You can specify at most 20 DSCP values for a queue in each call. Separate DSCP values with commas (,).
	integer	No	The DSCP value that matches the current queue. You can specify at most 20 DSCP values for a queue in each call. Separate DSCP values with commas (,).	5

Response parameters

Parameter	Type	Description	Example
	object	The response.
QosQueueId	string	The ID of the queue.	qos-queue-irqhi8k5fdyuu5****
RequestId	string	The ID of the request.	845F66F6-5C27-53A1-9428-B859086237B2

Error codes

HTTP status code	Error code	Error message	Description
400	IllegalParam.RemainBandwidthPercent	The specified RemainBandwidthPercent is invalid.	The error message returned because the RemainBandwidthPercent parameter is set to invalid value.
400	IncorrectStatus.TrafficQosPolicy	The status of TrafficQosPolicy is incorrect.	The error message returned because the status of the specified QoS policy does not support the operation.
400	Duplicated.Dscps	The parameter Dscps are duplicated.	The error message returned because the descriptions are duplicate.
400	InvalidDescription	Description is invalid.	The error message returned because the description is invalid.
400	InvalidName	Name is invalid.	The error message returned because the specified name is invalid.
400	MissingParam.Bandwidth	The parameter Bandwidth is mandatory.	The error message returned because no bandwidth value is specified. You must specify a bandwidth value.
400	IllegalParam.BandwidthGuaranteeModeMismatch	The BandwidthGuaranteeMode does not match the Bandwidth or RemainBandwidthPercent.	The BandwidthGuaranteeMode does not match the Bandwidth or RemainBandwidthPercent.
400	IllegalParam.AttachmentBandwidthExceed	The entered bandwidth causes the total QoS guaranteed bandwidth to exceed the cross-region bandwidth allocation value.	The entered bandwidth causes the total QoS guaranteed bandwidth to exceed the cross-region bandwidth allocation value.
400	MissingParam.RemainBandwidthPercent	RemainBandwidthPercent is missing.	RemainBandwidthPercent is missing.
400	IllegalParam.Bandwidth	Bandwidth is illegal	The error message returned because the specified bandwidth value is invalid.
400	InvalidParameter	Invalid parameter.	The error message returned because the parameter is set to an invalid value.
400	Unauthorized	The AccessKeyId is unauthorized.	The error message returned because you do not have the permissions to perform this operation.
400	MissingParam.TrafficQosPolicyId	The parameter TrafficQosPolicyId is mandatory.
404	InvalidTrafficQosPolicyId.NotFound	The specified TrafficQosPolicyId is not found.	The error message returned because the specified QoS policy ID (TrafficQosPolicyId) does not exist.

See Error Codes for a complete list.

Release notes

See Release Notes for a complete list.