This topic is generated by a machine translation engine without any human intervention. ALIBABA CLOUD DOES NOT GUARANTEE THE ACCURACY OF MACHINE TRANSLATED CONTENT. To request a human-translated version of this topic or provide feedback on this translation, please include it in the feedback form.
Add a compression rule
Debugging
Authorization information
The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:
- Operation: the value that you can use in the Action element to specify the operation on a resource.
- Access level: the access level of each operation. The levels are read, write, and list.
- Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
- For mandatory resource types, indicate with a prefix of * .
- If the permissions cannot be granted at the resource level,
All Resourcesis used in the Resource type column of the operation.
- Condition Key: the condition key that is defined by the cloud service.
- Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.
| Operation | Access level | Resource type | Condition key | Associated operation |
|---|---|---|---|---|
| esa:CreateCompressionRule | create | *Site acs:esa:{#regionId}:{#accountId}:site/{#SiteId} |
| none |
Request parameters
| Parameter | Type | Required | Description | Example |
|---|---|---|---|---|
| SiteId | long | Yes | Site ID, which can be obtained by calling the ListSites interface. | 1231231221*** |
| SiteVersion | integer | No | The version number of the site configuration. For sites with version management enabled, you can use this parameter to specify the effective version of the site configuration, defaulting to version 0. | 0 |
| RuleName | string | No | Rule name. This parameter is not required when adding a global configuration. | rule_example |
| RuleEnable | string | No | Rule switch. This parameter is not required when adding a global configuration. Value range:
| on |
| Rule | string | No | Rule content, using conditional expressions to match user requests. This parameter is not required when adding a global configuration. There are two usage scenarios:
| (http.host eq "video.example.com") |
| Gzip | string | No | Gzip compression. Value range:
| on |
| Brotli | string | No | Brotli compression. Value range:
| on |
| Zstd | string | No | Zstd compression. Value range:
| on |
Response parameters
Examples
Sample success responses
JSONformat
{
"RequestId": "C370DAF1-C838-4288-A1A0-9A87633D248E",
"ConfigId": 0
}Error codes
| HTTP status code | Error code | Error message | Description |
|---|---|---|---|
| 400 | MissingParameter | The specified ArgName is required for this function. | When configuring a specific function, the required parameter is missing. |
| 400 | ApplyVipError | Failed to apply for ip resources, please contact customer service. | Failed to apply for IP resources, please contact customer service. |
| 400 | CanNotSetSequence | Non-regular configuration, you cannot set Sequence parameters. | Sequence parameters is not allowed in global configuration. |
| 400 | CacheReserveSiteExceedLimit | The number of binding sites of the cache reserve instance exceeds the limit. The number of binding sites of a single cache reserve instance is limited. Please see the document for the limit. | The number of sites for which the cache reserve instance bindings exceeds the limit. |
| 400 | CompileRuleError | Rule compilation failed, please check the rule information passed in to ensure that the rule is written according to the syntax described in the document. | Rule compilation failed. Check the incoming rule configuration. For details, see the rule configuration format described in the interface document. |
| 400 | SiteConfigLengthExceedLimit | The overall configuration size of the site exceeds the limit, and the total size of all functional configurations of the site cannot exceed 512K. | The size of the site configuration exceeds the limit, and the total size cannot exceed 512K. |
| 400 | ConfigConflicts | Configuration conflicts, usually when multiple configurations are configured under the same function of the same site, such as duplicate rule names between multiple configurations. | The parameter uniqueness check failed. Check for duplicate parameter values. |
| 400 | FunctionConflict | The feature configuration conflicts. Sites with version management enabled cannot configure this feature. | The currently configured function conflicts with other functions. If you need to configure, delete the conflicting function configurations first. |
| 400 | RuleRegexQuotaCheckFailed | When configuring rules, rules with regular expressions are not allowed in this plan. Please check the relevant documentation of the plan or upgrade the plan. | The current plan does not support the configuration of a rule engine with a regular expression. Please check the plan description and upgrade your plan. |
| 400 | NestedRuleQuotaCheckFailed | The nesting level of rules allowed by the plan failed to be verified. Please modify the nesting level of rules or upgrade the plan. | The number of embedded sub-conditions in the rule exceeds the plan limit. Please check the plan description and upgrade your plan. |
| 400 | ArgQuotaCheckFailed | The passed-in parameter value failed to verify the validity of the plan. Please check the plan document to obtain the range of parameters that can be configured for the site plan. | The current plan does not support the configuration of restricted parameters, please check the input parameters. |
| 400 | FunctionQuotaCheckFailed | The quota verification for this function fails. It may be that the configuration of this function exceeds the limit of the site plan. Please check the plan introduction document corresponding to this site. | The current plan does not support the configuration of restricted functions, please check the plan related function description. |
| 400 | ConfExceedLimit | The number of function configurations exceeds the limit. Please check the interface document to see the number of configurations that can be supported by a single function. | The number of configuration items for the current function has exceeded the upper limit set by the system. |
| 400 | ServiceInvokeFailed | The call to the internal service failed. The engineer is resolving the problem. Please wait a moment before trying, or contact customer service for details. | Failed to call the service. Please try again later or contact customer service for details. |
| 400 | SpecifiedVersionReadOnly | The specified version number is read-only and cannot be modified. | The specified version number is read-only and cannot be modified. |
| 400 | VersionNotValid | The site does not have version management enabled, or the version number passed in does not exist. | The site does not have version management enabled, or the version number passed in does not exist. |
| 400 | InternalException | Failed to call the service. Try again later or contact technical support. | Failed to call the service. Try again later or contact technical support. |
| 400 | InvalidParameter.ArgName | Invalid ArgName. Check your website configuration parameters and make sure that they match the supported features and parameter names listed in the official documentation. | Invalid ArgName. Check your website configuration parameters and make sure that they match the supported features and parameter names listed in the official documentation. |
| 400 | InvalidParameter.ArgValue | Invalid parameter value. Check whether the value format and length meet the requirements. | Invalid parameter value. Check whether the value format and length meet the requirements. |
| 400 | InvalidParameter.Configs | Invalid parameter configurations. Check whether your feature configurations are in the valid format and comply with relevant requirements. | Invalid parameter configurations. Check whether your feature configurations are in the valid format and comply with relevant requirements. |
| 400 | InvalidParameter.FunctionName | The specified feature does not exist. Specify a valid feature name based on the related documentation. | The specified feature does not exist. Specify a valid feature name based on the related documentation. |
| 400 | InstanceNotExist | The instance does not exist. Check whether the specified instance ID is correct or whether the instance belongs to your account. | The instance does not exist. Check whether the specified instance ID is correct or whether the instance belongs to your account. |
| 400 | LockFailed | The system is handling requests you previously submitted. Try again later. | The system is handling requests you previously submitted. Try again later. |
| 400 | Instance.NotOnline | Your plan is unavailable due to an overdue payment. Complete the payment first. | Your plan is unavailable due to an overdue payment. Complete the payment first. |
| 400 | IllegalOperation.VersionManagement | The version management operation failed because incompatible features or environment settings are configured. Adjust your configurations and try again. | The version management operation failed because incompatible features or environment settings are configured. Adjust your configurations and try again. |
| 400 | QuotaCheckFailed.VersionManagement | Insufficient quota for version management. Contact technical support. | Insufficient quota for version management. Contact technical support. |
| 400 | CachceReserveInstanceCheckFalied | If the site uses the back-to-source whitelist node and the cache holding instance is not in the back-to-source whitelist, the cache holding instance cannot be associated with the site. If you want to use both functions at the same time, please contact customer service for details. | If the site uses the back-to-source whitelist node and the cache holding instance is not in the back-to-source whitelist, the cache holding instance cannot be associated with the site. If you want to use both functions at the same time, please contact customer service for details. |
| 404 | SiteNotFound | The website does not exist or does not belong to you. | The website does not exist or does not belong to you. |
For a list of error codes, visit the Service error codes.
Change history
| Change time | Summary of changes | Operation |
|---|---|---|
| 2025-02-12 | The Error code has changed. The request parameters of the API has changed | View Change Details |