This topic describes how to configure one-way data synchronization between ApsaraDB RDS for PostgreSQL instances in the Data Transmission Service (DTS) console.

Prerequisites

  • The source and destination ApsaraDB RDS for PostgreSQL instances are created. For more information, see Create an ApsaraDB RDS for PostgreSQL instance.
    Note To ensure compatibility, the version of the destination database must be the same as or later than the version of the source database.

    If the version of the destination database is earlier than the version of the source database, database compatibility issues may occur.

  • The available storage space of the destination ApsaraDB RDS for PostgreSQL instance is larger than the total size of the data in the source ApsaraDB RDS for PostgreSQL instance.

Limits

Supported synchronization topologies

  • One-way one-to-one synchronization
  • One-way one-to-many synchronization
  • One-way cascade synchronization
  • One-way many-to-one synchronization

For more information, see Synchronization topologies.

SQL operations that can be synchronized

Operation type SQL statements
DML INSERT, UPDATE, and DELETE

Procedure

  1. Go to the Data Synchronization page of the new DTS console.
    Note You can also log on to the Data Management (DMS) console. In the top navigation bar, choose DTS > Data Synchronization.
  2. In the upper-left corner of the page, select the region where the data synchronization instance resides.
    Select a region
  3. Click Create Task. On the page that appears, configure the source and destination databases.
    Warning After you select the source and destination instances, we recommend that you read the limits displayed at the top of the page. This helps you create and run the data synchronization task.
    Section Parameter Description
    N/A Task Name

    DTS automatically generates a task name. We recommend that you specify an informative name to identify the task. You do not need to use a unique task name.

    Source Database Select Template
    If the connection settings of the instance has been saved as a template, you can select the connection name. DTS automatically applies the saved connection settings.
    Note
    • You can modify the connection settings of a template.
    • To edit the template name, you can click Edit Template Name at the bottom of the Source Database section.
    • The modified connection template will take effect the next time you select the connection template. The database instance that you have configured by using the template is not affected.
    Database Type Select PostgreSQL.
    Access Method Select Alibaba Cloud Instance.
    Instance Region Select the region where the source ApsaraDB RDS for PostgreSQL instance resides.
    Instance ID Select the ID of the source ApsaraDB RDS for PostgreSQL instance.
    Database Name Enter the name of the source database in the ApsaraDB RDS for PostgreSQL instance.
    Database Account Enter the database account of the source ApsaraDB RDS for PostgreSQL instance. A privileged account has the required permissions.
    Note If the version of the source ApsaraDB RDS for PostgreSQL instance is 9.4 and you synchronize only DML operations, the database account must have the REPLICATION permission.
    Database Password

    Enter the password of the database account.

    Save as Template
    Click Save as Template. In the dialog box that appears, set the name of the database connection, and click OK. The connection settings of the database instance is saved as a template.
    Note We recommend that you specify an informative name to identify the database connection. You do not need to use a unique name.
    Destination Database Select Template
    If the connection settings of the instance has been saved as a template, you can select the connection name. DTS automatically applies the saved connection settings.
    Note
    • You can modify the connection settings of a template.
    • To edit the template name, you can click Edit Template Name at the bottom of the Source Database section.
    • The modified connection template will take effect the next time you select the connection template. The database instance that you have configured by using the template is not affected.
    Database Type Select PostgreSQL.
    Access Method Select Alibaba Cloud Instance.
    Instance Region Select the region where the destination ApsaraDB RDS for PostgreSQL instance resides.
    Instance ID Select the ID of the destination ApsaraDB RDS for PostgreSQL instance.
    Database Name Enter the name of the destination database in the ApsaraDB RDS for PostgreSQL instance.
    Database Account Enter the database account of the destination ApsaraDB RDS for PostgreSQL instance. A privileged account has the required permissions.
    Database Password

    Enter the password of the database account.

    Save as Template
    Click Save as Template. In the dialog box that appears, set the name of the database connection, and click OK. The connection settings of the database instance is saved as a template.
    Note We recommend that you specify an informative name to identify the database connection. You do not need to use a unique name.
  4. In the lower part of the page, click Test Connectivity and Proceed.
  5. Select objects for the task and configure advanced settings.
    • Basic Settings
      Parameter Description
      Task Stages

      Incremental Data Synchronization is selected by default. You must also select Schema Synchronization and Full Data Synchronization. After the precheck, DTS synchronizes the historical data of the selected objects from the source instance to the destination cluster. The historical data is the basis for subsequent incremental synchronization.

      Processing Mode of Conflicting Tables
      • Precheck and Report Errors: checks whether the destination database contains tables that have the same names as tables in the source database. If the source and destination databases do not contain identical table names, the precheck is passed. Otherwise, an error is returned during precheck and the data synchronization task cannot be started.

        Note You can use the object name mapping feature to rename the tables that are synchronized to the destination database. You can use this feature if the source and destination databases contain identical table names and the tables in the destination database cannot be deleted or renamed. For more information, see Map object names.
      • Ignore Errors and Proceed: skips the precheck for identical table names in the source and destination databases.
        Warning If you select Ignore Errors and Proceed, data consistency is not guaranteed and your business may be exposed to potential risks.
        • If the source and destination databases have the same schema, and a data record has the same primary key as an existing data record in the destination database:
          • During full data synchronization, DTS does not synchronize the data record to the destination database. The existing data record in the destination database is retained.
          • During incremental data synchronization, DTS synchronizes the data record to the destination database. The existing data record in the destination database is overwritten.
        • If the source and destination databases have different schemas, data may fail to be initialized. In this case, only some columns are synchronized or the data synchronization task fails.
      Synchronization Topology

      Select One-way Synchronization.

      Select Objects

      Select one or more objects from the Source Objects section and click the Rightwards arrow icon to move the objects to the Selected Objects section.

      Note You can select columns, tables, or schemas as the objects to be synchronized.
      Rename Databases and Tables
      • To rename an object that you want to synchronize to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object.
      • To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time.
      Filter data

      You can specify WHERE conditions to filter data. For more information, see Use SQL conditions to filter data.

      Select the SQL operations to be synchronized In the Selected Objects section, right-click an object. In the dialog box that appears, select the SQL operations that you want to synchronize. For more information, see SQL operations that can be synchronized.
    • Advanced Settings
      Parameter Description
      Set Alerts
      Specify whether to set alerts for the data synchronization task. If the task fails or the synchronization latency exceeds the threshold, the alert contacts will receive notifications.
      • Select No if you do not want to set alerts.
      • Select Yes to set alerts. In this case, you must also set the alert threshold and alert contacts.
      Retry Time for Failed Connection
      Specify the retry time for failed connections. Valid values: 10 to 1440. Unit: minutes. Default value: 120. We recommend that you set the retry time to more than 30 minutes. If DTS reconnects to the source and destination databases within the specified time, DTS resumes the data synchronization task. Otherwise, the data synchronization task fails.
      Note
      • If multiple DTS instances have the same source or destination database, the lowest value takes effect. For example, the retry time is set to 30 minutes for Instance A and 60 minutes for Instance B, DTS retries failed connections at an interval of 30 minutes.
      • When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time based on your business needs. You can also release the DTS instance at your earliest opportunity after the source and destination instances are released.
  6. Click Next: Save Task Settings and Precheck in the lower part of the page.
    Note
    • Before you can start the data synchronization task, DTS performs a precheck. You can start the data synchronization task only after the task passes the precheck.
    • If the task fails to pass the precheck, you can click the Info icon icon next to each failed item to view details.
      • You can troubleshoot the issues based on the causes and run a precheck again.
      • If you do not need to troubleshoot the issues, you can ignore failed items and run a precheck again.
  7. Wait until the Success Rate becomes 100%. Then, click Next: Purchase Instance.
  8. On the Purchase Instance page, specify the Billing Method and Instance Class parameters for the data synchronization instance. The following table describes the parameters.
    Section Parameter Description
    Parameters Billing Method
    • Subscription: You can pay for your subscription when you create an instance. We recommend that you select the subscription billing method for long-term use because it is more cost-effective than the pay-as-you-go billing method. You can save more costs with longer subscription periods.
    • Pay-as-you-go: A pay-as-you-go instance is billed on an hourly basis. We recommend that you select the pay-as-you-go billing method for short-term use. If you no longer require your pay-as-you-go instance, you can release it to reduce costs.
    Instance Class DTS provides several instance classes that have different performance in synchronization speed. You can select an instance class based on your business scenario. For more information, see Specifications of data synchronization instances.
    Subscription Length If you select the subscription billing method, set the subscription length and the number of instances that you want to create. The subscription length can be one to nine months or one to three years.
    Note This parameter is available only if you select the subscription billing method.
  9. Read and select Data Transmission Service (Pay-as-you-go) Service Terms.
  10. Click Buy and Start to start the data synchronization task. You can view the progress of the task in the task list.