All Products
Search
Document Center

Data Transmission Service:Migrate data from an ApsaraDB RDS for MySQL instance to a DataHub project

Last Updated:Jul 25, 2023

This topic describes how to migrate data from an ApsaraDB RDS for MySQL instance to a DataHub project by using Data Transmission Service (DTS).

Prerequisites

Limits

Note DTS does not migrate foreign keys in the source database to the destination database. Therefore, the cascade and delete operations of the source database are not migrated to the destination database.
CategoryDescription
Limits on the source database
  • The server to which the source database belongs must have sufficient outbound bandwidth. Otherwise, the data migration speed decreases.
  • The tables to be migrated must have PRIMARY KEY or UNIQUE constraints, and all fields must be unique. Otherwise, the destination database may contain duplicate data records.
  • If you select tables as the objects to be migrated and you need to edit tables, such as renaming tables or columns, in the destination database, you can migrate up to 1,000 tables in a single data migration task. If you run a task to migrate more than 1,000 tables, a request error occurs. In this case, we recommend that you split the tables and configure multiple tasks to migrate the tables, or configure a task to migrate the entire database.
  • If you want to migrate incremental data, make sure that the following requirements are met:
    • The binary logging feature is enabled in the ApsaraDB RDS console. For more information, see Modify the parameters of an ApsaraDB RDS for MySQL instance. The value of the binlog_format parameter is set to row. The value of the binlog_row_image parameter is set to full. Otherwise, error messages are returned during the precheck and the data migration task cannot be started.
      Important If the source database is a self-managed MySQL database deployed in a dual-primary cluster, you must set the log_slave_updates parameter to ON. This ensures that DTS can obtain all binary logs. For more information, see Create an account for a self-managed MySQL database and configure binary logging.
    • If you perform only incremental data migration, the binary logs of the source database must be stored for more than 24 hours. If you perform schema migration and incremental data migration, the binary logs of the source database must be stored for at least seven days. After schema migration is complete, you can set the retention period to more than 24 hours. Otherwise, DTS may fail to obtain the binary logs and the task may fail. In extreme cases, data may be inconsistent or lost. Make sure that you set the retention period of binary logs in accordance with the preceding requirements. Otherwise, the service reliability and performance stated in the SLA of DTS cannot be achieved. For more information about binary log files of an ApsaraDB RDS for MySQL instance, see View and delete the binary log files of an ApsaraDB RDS for MySQL instance.

  • Limits on operations: During schema migration, do not perform DDL operations to change the schemas of databases or tables. Otherwise, the data migration task fails.
Other limits
  • Only tables can be selected as objects to be migrated.
  • We recommend that you do not use a tool such as pt-online-schema-change to perform DDL operations on objects during data migration. Otherwise, data migration may fail.
  • If you use only DTS to write data to the destination database, you can use Data Management (DMS) to perform online DDL operations on source tables during data migration. For more information, see Perform lock-free DDL operations.
    Warning If you use tools other than DTS to write data to the destination database, we recommend that you do not use DMS to perform online DDL operations. Otherwise, data loss may occur in the destination database.
  • You must make sure that the precision settings for columns of the FLOAT or DOUBLE data type meet your business requirements. DTS uses the ROUND(COLUMN,PRECISION) function to retrieve values from columns of the FLOAT or DOUBLE data type. If you do not specify a precision, DTS sets the precision for the FLOAT data type to 38 digits and the precision for the DOUBLE data type to 308 digits.
  • DTS attempts to resume data migration tasks that failed within the last seven days. Before you switch workloads to the destination database, stop or release the data migration task. You can also execute the REVOKE statement to revoke the write permissions from the accounts used by DTS to access the destination database. Otherwise, the data in the source database will overwrite the data in the destination database after the failed task is resumed.
Special cases
If the source database is a self-managed MySQL database, take note of the following limits:
  • If you perform a primary/secondary failover on the source database when the data migration task is running, the task fails.
  • DTS calculates migration latency based on the timestamp of the latest migrated data in the destination database and the current timestamp in the source database. If no DML operation is performed on the source database for an extended period of time, the migration latency may be inaccurate. If the latency of the data migration task is excessively high, you can perform a DML operation on the source database to update the latency.
    Note If you select an entire database as the object to be migrated, you can create a heartbeat table. The heartbeat table is updated or receives data every second.
  • DTS executes the CREATE DATABASE IF NOT EXISTS `test` statement in the source database as scheduled to move forward the binary log file position.

Billing

Migration typeTask configuration feeInternet traffic fee
Schema migrationFree of charge Charged only when data is migrated from Alibaba Cloud over the Internet. For more information, see Billing overview.

Migration types

  • Schema migration

    DTS migrates the schemas of objects from the source database to the destination database.

  • Full data migration

    DTS migrates the existing data of objects from the source database to the destination database.

  • Incremental data migration

    After full data migration is complete, DTS migrates incremental data from the source database to the destination database. Incremental data migration allows data to be migrated smoothly without interrupting services of self-managed applications during data migration.

SQL operations that can be incrementally migrated

Operation type

SQL statement

DML

INSERT, UPDATE, and DELETE

DDL

ADD COLUMN

Permissions required for database accounts

DatabaseRequired permission
Source ApsaraDB RDS for MySQL instanceThe read permissions on the objects to migrate

Procedure

  1. Go to the Data Migration Tasks page.
    1. Log on to the Data Management (DMS) console.
    2. In the top navigation bar, click DTS.
    3. In the left-side navigation pane, choose DTS (DTS) > Data Migration.
    Note
  2. From the drop-down list next to Data Migration Tasks, select the region in which the data migration instance resides.
    Note If you use the new DTS console, you must select the region in which the data migration instance resides in the upper-left corner.
  3. Click Create Task. On the page that appears, configure the source and destination databases.
    Warning

    After you configure the source and destination databases, we recommend that you read the limits that are displayed in the upper part of the page. Otherwise, the task may fail or data inconsistency may occur.

    SectionParameterDescription
    N/ATask Name

    The name of the task. DTS automatically assigns a name to the task. We recommend that you specify a descriptive name that makes it easy to identify the task. You do not need to specify a unique task name.

    Source DatabaseSelect an existing DMS database instance
    The database instance that you want to use. You can choose whether to use an existing instance based on your business requirements.
    • If you use an existing instance, DTS automatically applies the parameter settings of the source database.
    • If you do not use an existing instance, you must configure parameters for the source database.
    Database TypeThe type of the source instance. Select MySQL.
    Access MethodThe access method of the source instance. Select Alibaba Cloud Instance.
    Instance RegionThe region in which the source ApsaraDB RDS for MySQL instance resides.
    Replicate Data Across Alibaba Cloud AccountsSpecifies whether data is migrated across Alibaba Cloud accounts. In this example, No is selected.
    RDS Instance IDThe ID of the source ApsaraDB RDS for MySQL instance.
    Database AccountThe database account of the source ApsaraDB RDS for MySQL instance. For more information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
    Database Password

    The password of the database account.

    Encryption

    Specifies whether to encrypt the connection to the database. Select Non-encrypted or SSL-encrypted based on your business requirements. If you select SSL-encrypted, you must enable SSL encryption for the ApsaraDB RDS for MySQL instance before you configure the data synchronization task. For more information, see Configure SSL encryption for an ApsaraDB RDS for MySQL instance.

    Destination DatabaseSelect an existing DMS database instance
    The database instance that you want to use. You can choose whether to use an existing instance based on your business requirements.
    • If you use an existing instance, DTS automatically applies the parameter settings of the source database.
    • If you do not use an existing instance, you must configure parameters for the source database.
    Database TypeThe type of the destination project. Select DataHub.
    Access MethodThe access method of the destination project. Select Alibaba Cloud Instance.
    Instance RegionThe region in which the DataHub project resides.
    ProjectThe destination DataHub project.
  4. In the lower part of the page, click Test Connectivity and Proceed.
    If the source or destination database is an Alibaba Cloud database instance, such as an ApsaraDB RDS for MySQL or ApsaraDB for MongoDB instance, DTS automatically adds the CIDR blocks of DTS servers to the IP address whitelist of the instance. If the source or destination database is a self-managed database hosted on an Elastic Compute Service (ECS) instance, DTS automatically adds the CIDR blocks of DTS servers to the security group rules of the ECS instance, and you must make sure that the ECS instance can access the database. If the source or destination database is a self-managed database that is deployed in a data center or provided by a third-party cloud service provider, you must manually add the CIDR blocks of DTS servers to the IP address whitelist of the database to allow DTS to access the database. For more information, see the "CIDR blocks of DTS servers" section of the Add the CIDR blocks of DTS servers to the security settings of on-premises databases topic.
    Warning If the CIDR blocks of DTS servers are automatically or manually added to the IP address whitelist of the database instance or ECS security group rules, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhance the security of your account and password, limit the ports that are exposed, authenticate API calls, regularly check the IP address whitelist or ECS security group rules and forbid unauthorized CIDR blocks, and connect the database to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.
  5. Configure objects to synchronize and advanced settings.
    ParameterDescription
    Synchronization TypeYou can select only Schema Migration and Incremental Data Migration. Full Data Migration cannot be selected.
    Note If Incremental Data Migration is not selected, we recommend that you do not write data to the source database during data migration. This ensures data consistency between the source and destination databases.
    Processing Mode of Conflicting Tables
    • Precheck and Report Errors: checks whether the destination database contains tables that have the same names as tables in the source database. If the source and destination databases do not contain tables that have identical table names, the precheck is passed. Otherwise, an error is returned during the precheck and the data migration task cannot be started.

      Note You can use the object name mapping feature to rename the tables that are migrated to the destination database. You can use this feature if the source and destination databases contain identical table names and the tables in the destination database cannot be deleted or renamed. For more information, see Map object names.
    • Ignore Errors and Proceed: skips the precheck for identical table names in the source and destination databases.
      Warning If you select Ignore Errors and Proceed, data consistency is not ensured, and your business may be exposed to potential risks.
      • If the source and destination databases have the same schemas, and a data record has the same primary key value as an existing data record in the destination database:
        • During incremental data migration, DTS migrates the data record to the destination database. The existing data record in the destination database is overwritten.
      • If the source and destination databases have different schemas, initial data migration may fail. In this case, only part of the columns are migrated, or the data migration task fails.
    Apply New Naming Rules of Additional Columns

    When DTS synchronizes data to DataHub, DTS adds additional columns to the destination topic. If the names of additional columns are the same as the names of existing columns in the destination topic, the data synchronization task fails. You can select Yes or No to specify whether to enable the new naming rules for additional columns based on your business requirements.

    Warning

    Before you set this parameter, check whether additional columns have name conflicts with existing columns in the destination topic. Otherwise, the data synchronization task may fail or data may be lost. For more information, see Modify the naming rules for additional columns.

    Source Objects

    Select one or more objects from the Source Objects section and click the Rightwards arrow icon to add the objects to the Selected Objects section.

    Note You can select only databases as the objects to migrate.
    Selected Objects
    • To rename an object that you want to migrate to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object.
    • To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time.
    Note
    • If you use the object name mapping feature to rename an object, other objects that are dependent on the object may fail to be migrated.
    • To specify WHERE conditions to filter data, right-click an object in the Selected Objects section. In the dialog box that appears, specify the conditions. For more information about how to specify the conditions, see Use SQL conditions to filter data.
    • To select the DDL or DML operations performed on a specific database or table, right-click an object in the Selected Objects section. In the dialog box that appears, select the DML or DDL operations that you want to migrate. For more information about the DML and DDL operations that can be migrated, see SQL operations that can be incrementally migrated.
  6. Click Next: Advanced Settings to configure advanced settings.
    ParameterDescription
    Set Alerts
    Specifies whether to set alerts for the data migration task. If the task fails or the migration latency exceeds the threshold, the alert contacts will receive notifications. Valid values:
    Capitalization of Object Names in Destination Instance

    The capitalization of database names, table names, and column names in the destination instance. By default, DTS default policy is selected. You can select other options to ensure that the capitalization of object names is consistent with that in the source or destination database. For more information, see Specify the capitalization of object names in the destination instance.

    Specify the retry time range for failed connections

    The retry time range for failed connections. If the source or destination database fails to be connected after the data synchronization task is started, DTS immediately retries a connection within the time range. Valid values: 10 to 1440. Unit: minutes. Default value: 720. We recommend that you set the parameter to a value greater than 30. If DTS reconnects to the source and destination databases within the specified time range, DTS resumes the data synchronization task. Otherwise, the data synchronization task fails.

    Note
    • If you set different retry time ranges for multiple DTS tasks that have the same source or destination database, the shortest retry time range that is set takes precedence.

    • When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time range based on your business requirements. You can also release the DTS instance at your earliest opportunity after the source and destination instances are released.

  7. Click Next: Save Task Settings and Precheck in the lower part of the page.

    You can move the pointer over Next: Save Task Settings and Precheck and click Preview OpenAPI parameters to view the parameter settings of the API operation that is called to configure the instance.

    Note
    • Before you can start the data synchronization task, DTS performs a precheck. You can start the data synchronization task only after the task passes the precheck.

    • If the task fails to pass the precheck, click View Details next to each failed item. After you troubleshoot the issues based on the causes, run a precheck again.

    • If an alert is triggered for an item during the precheck:

      • If an alert item cannot be ignored, click View Details next to the failed item and troubleshoot the issues. Then, run a precheck again.

      • If an alert item can be ignored, click Confirm Alert Details. In the View Details dialog box, click Ignore. In the message that appears, click OK. Then, click Precheck Again to run a precheck again. If you ignore the alert item, data inconsistency may occur, and your business may be exposed to potential risks.

  8. Wait until the success rate becomes 100%. Then, click Next: Purchase Instance.

  9. On the Purchase Instance page, specify the Instance Class parameter for the data migration instance. The following table describes the parameter.
    SectionParameterDescription
    New Instance ClassResource GroupThe resource group to which the data migration instance belongs. Default value: default resource group. For more information, see What is Resource Management?.
    Instance Class

    DTS provides various instance classes that vary in the migration speed. You can select an instance class based on your business scenario. For more information, see Specifications of data migration instances.

  10. Read and select the check box to agree to the Data Transmission Service (Pay-as-you-go) Service Terms.

  11. Click Buy and Start to start the data migration task. You can view the progress of the task in the task list.