Obtain the times of access to a CDN domain per second. The value is expressed in QPS.

  • When StartTime and EndTime are not specified, the system reads data from the past 24 hours by default. Query by specified start time and end time is also supported. The two parameters must be both specified.
  • Batch domain name query is supported. Multiple domain names are separated by commas (half width).
  • Data from the past 90 days can be obtained at most.

Request parameters

Parameters Type Required Example values Description
Action String Yes DescribeDomainQpsData The name of this interface. Value: DescribeDomainQpsData
DomainName String No test.test.com
  • If the parameter is left blank, the system returns the combined data of all CDN domains by default.
  • You can enter CDN domains to be queried.
  • Batch domain name query is supported. Multiple domain names are separated by commas (half width).
DomainType String No dynamic

Query type.

  • If the parameter is set to "dynamic", the system queries the QPS of dynamic resources during full-site acceleration.
  • If the parameter is left blank, the system queries the QPS of static resources.
EndTime String No 2015-12-10T21:00Z
  • The end time must be later than the start time.
  • The date format adopts ISO8601 notation and uses the UTC time.
  • Format: YYYY-MM-DDThh:mmZ.
FixTimeGap String No false Zero-padding.
Interval String No 300

Time granularity of data query.

  • 300s, 3600s, 14400s, 28800s and 86400s are supported.
  • When the parameter is left blank or when the value is not supported, the default value 300 seconds is used.
IspNameEn String No unicom Carrier name in English, which is obtained using the DescribeCdnRegionAndIsp interface. If the parameter is left blank, the English names of all carriers are obtained.
LocationNameEn String No beijing Region name in English, which is obtained using the DescribeCdnRegionAndIsp interface. If the parameter is left blank, the English names of all regions are obtained.
StartTime String No 2015-12-10T20:00Z

Start time of data query.

  • The date format adopts ISO8601 notation and uses the UTC time.
  • Format: YYYY-MM-DDThh:mmZ.
  • Minimum data granularity: 5 minutes.
TimeMerge String No on

Time range:

  • on: default value, indicating that the interval of each record can be merged based on the time span.
  • off: data of 5-min-granularity is returned, and the maximum time span is 31 days.

Return parameters

Parameters Type Example values Description
RequestId String B8333EDB-4595-46E0-AFE9-29BAA290D0E0 The ID of the request.
DomainName String test.test.com
  • If the parameter is left blank, the system returns the combined data of all CDN domains by default.
  • You can enter CDN domains to be queried.
  • Batch domain name query is supported. Multiple domain names are separated by commas (half width).
DataInterval String 300 Interval of each record. The unit is seconds.
StartTime String 2015-12-10T20:00Z Start time.
EndTime String 2015-12-10T21:00Z End time.
QpsDataInterval Times of access (expressed in QPS) to a CDN domain per second during each interval.
  └TimeStamp String 2015-12-10T21:00:00Z Start time of a time slice.
  └Value String 0 Total QPS.
  └DomesticValue String 0 QPS in China.
  └OverseasValue String 0 QPS outside China.
  └AccValue String 0 Total times of access.
  └AccDomesticValue String 0 Times of access in China.
  └AccOverseasValue String 0 Times of access outside China.
  └DynamicValue String 0 Dynamic QPS data value during full-site acceleration.
  └DynamicDomesticValue String 0 Bandwidth dynamic QPS in China during full-site acceleration. The value is blank when it is queried by regional carrier.
  └DynamicOverseasValue String 0 Bandwidth dynamic QPS during full-site acceleration outside China. The value is blank when it is queried by regional carrier.
  └StaticValue String 0 Static QPS data value during full-site acceleration. Unit: bit/second.
  └StaticDomesticValue String 0 Bandwidth static QPS in China during full-site acceleration. The value is blank when it is queried by regional carrier.
  └StaticOverseasValue String 0 Bandwidth static QPS during full-site acceleration outside China. The value is blank when it is queried by regional carrier.

Examples

Request example


http://cdn.aliyuncs.com?Action=DescribeDomainQpsData&DomainName=test.com
&StartTime=2015-12-10T20:00Z
&EndTime=2015-12-10T21:00Z
&public request parameter
Normal return example
  • JSON format

    
        "DataInterval":"300",
        "DomainName":"test.com",
        "EndTime":"2015-12-10T21:00Z",
        "QpsDataInterval":{
            "DataModule":[
                
                    "DynamicDomesticValue":"0",
                    "DynamicOverseasValue":"0",
                    "DynamicValue":"0",
                    "StaticDomesticValue":"0",
                    "StaticOverseasValue":"0",
                    "StaticValue":"0",
                    "TimeStamp":"2015-12-10T21:00:00Z",
                    "Value":"0.56"
                
                
                    "DynamicDomesticValue":"0",
                    "DynamicOverseasValue":"0",
                    "DynamicValue":"0",
                    "StaticDomesticValue":"0",
                    "StaticOverseasValue":"0",
                    "StaticValue":"0",
                    "TimeStamp":"2015-12-10T20:35:00Z",
                    "Value":"0.64"
                
                
                    "DynamicDomesticValue":"0",
                    "DynamicOverseasValue":"0",
                    "DynamicValue":"0",
                    "StaticDomesticValue":"0",
                    "StaticOverseasValue":"0",
                    "StaticValue":"0",
                    "TimeStamp":"2015-12-10T20:50:00Z",
                    "Value":"0.4"
                
                
                    "DynamicDomesticValue":"0",
                    "DynamicOverseasValue":"0",
                    "DynamicValue":"0",
                    "StaticDomesticValue":"0",
                    "StaticOverseasValue":"0",
                    "StaticValue":"0",
                    "TimeStamp":"2015-12-10T20:05:00Z",
                    "Value":"1.0033333333333334"
                
            
        
        "RequestId":"BEA5625F-8FCF-48F4-851B-CA63946DA664",
        "StartTime":"2015-12-10T20:00Z"
    
Exception return example
  • JSON format

    
        "Code":"InternalError",
        "HostId":"cdn.aliyuncs.com",
        "Message":"The request processing has failed due to some unknown error.",
        "RequestId":"16A96B9A-F203-4EC5-8E43-CB92E68F4CD8"