DescribeDiskMonitorData - Elastic Compute Service - Alibaba Cloud Documentation Center

Queries the monitoring data of a disk in a specific period of time.

Operation description

Usage notes

You can query the following monitoring data of a disk: the read IOPS, write IOPS, read bandwidth (byte/s), write bandwidth (byte/s), read latency (microseconds), and write latency (microseconds).

Take note of the following items:

You can query the monitoring data only of the disks that are in the In Use (In_Use) state. For more information, see Disk states.

**

Note Some information may be missing from the monitoring data of a disk because the disk is not in the In Use (In_Use) state and the system cannot obtain the relevant information.
Up to 400 monitoring data entries can be returned at a time. Make sure that the TotalCount value does not exceed 400. The value is calculated by using the following formula: TotalCount = (EndTime - StartTime)/Period. If the TotalCount value is greater than 400, the InvalidParameter.TooManyDataQueried error is returned.
You can query the monitoring data in the last 30 days. If the value of StartTime is more than 30 days earlier than the current time, an error is returned.

Debugging

OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer.

Debug

Authorization information

There is currently no authorization information disclosed in the API.

Request parameters

Parameter	Type	Required	Description	Example
DiskId	string	Yes	The disk ID.	d-bp1bq5g3dxxo1x4o****
StartTime	string	Yes	The beginning of the time range to query. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the time is rounded up to the next minute.	2014-07-23T12:07:00Z
EndTime	string	Yes	The end of the time range to query. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. If the value of seconds (ss) is not 00, the time is rounded up to the next minute.	2014-07-23T12:09:00Z
Period	integer	No	The interval at which to retrieve the monitoring data. Unit: seconds. Valid values: 60 600 3600 Default value: 60.	60

Response parameters

Parameter	Type	Description	Example
	object
TotalCount	integer	The total number of returned monitoring data entries.	3
RequestId	string	The request ID.	473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
MonitorData	object []	The monitoring data of the disk.
BPSRead	integer	The read bandwidth of the disk. Unit: byte/s.	0
IOPSRead	integer	The number of read I/O operations per second on the disk.	0
LatencyRead	integer	The read latency of the disk. Unit: microseconds.	0
BPSTotal	integer	The total read and write bandwidth of the disk. Unit: byte/s.	204
IOPSTotal	integer	The total number of read and write I/O operations per second on the disk.	0
TimeStamp	string	The timestamp of the monitoring data. The time follows the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time is displayed in UTC.	2014-07-23T12:07:00Z
LatencyWrite	integer	The write latency of the disk. Unit: microseconds.	0
IOPSWrite	integer	The number of write I/O operations per second on the disk.	0
DiskId	string	The ID of the disk.	d-bp1bq5g3dxxo1x4o****
BPSWrite	integer	The write bandwidth of the disk. Unit: byte/s.	204

Examples

Sample success responses

JSONformat

{
  "TotalCount": 3,
  "RequestId": "473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E",
  "MonitorData": {
    "DiskMonitorData": [
      {
        "BPSRead": 0,
        "IOPSRead": 0,
        "LatencyRead": 0,
        "BPSTotal": 204,
        "IOPSTotal": 0,
        "TimeStamp": "2014-07-23T12:07:00Z",
        "LatencyWrite": 0,
        "IOPSWrite": 0,
        "DiskId": "d-bp1bq5g3dxxo1x4o****",
        "BPSWrite": 204
      }
    ]
  }
}

Error codes

HTTP status code	Error code	Error message	Description
400	InvalidStartTime.Malformed	The specified parameter "StartTime" is not valid.	-
400	InvalidEndTime.Malformed	The specified parameter "EndTime" is not valid.	The specified EndTime parameter is invalid.
400	InvalidPeriod.ValueNotSupported	The specified parameter "Period" is not valid.	-
400	InvalidStartTime.TooEarly	The specified parameter "StartTime" is too early.	-
400	InvalidParameter.TooManyDataQueried	Too many data queried.	-
400	Throttling	Request was denied due to request throttling.	-
400	InvalidInstanceType.NotSupportCredit	The InstanceType of the specified instance does not support credit.	The instance type does not support burstable instances.
400	InvalidParameter.EndTime	The specified parameter EndTime is earlier than StartTime.	The end time cannot be earlier than the start time.
404	InvalidDiskId.NotFound	The DiskId provided does not exist in our records.	The specified disk does not exist. Check whether the disk ID is correct.
500	InternalError	The request processing has failed due to some unknown error, exception or failure.	An internal error has occurred. Try again later.

For a list of error codes, visit the Service error codes.

Change history

Change time

Summary of changes

Operation

2023-05-06

The Error code has changed

see changesets

Change item	Change content
Error Codes	The Error code has changed.
	delete Error Codes: 400
	delete Error Codes: 404
	delete Error Codes: 500