Administrators of a Smart Access Gateway (SAG) APP instance can view the traffic data of the SAG APP instance in the SAG console. The traffic data shows the bandwidth usage of the SAG APP instance.

Procedure

  1. Log on to the SAG console.
  2. In the left-side navigation pane, click Smart Access Gateway APP.
  3. In the top navigation bar, select the target region.
  4. On the Smart Access Gateway APP page, find the target instance and click Traffic monitoring in the Monitoring column.
  5. On the Monitoring page, you can view different metrics of the SAG APP instance.

    By default, the system displays metrics within the last one hour. You can select other time ranges from the Time drop-down list in the upper-left corner of the Monitoring page. Supported time ranges are 3 hours, 6 hours, and 12 hours. You can also specify a custom time range. The following table lists the metrics of an SAG APP instance.

    Metric Description
    sag rxBytes The amount of inbound traffic of the SAG APP instance. Default unit: byte.

    You can also set the unit to KB, MB, or GB.

    sag txBytes The amount of outbound traffic of the SAG APP instance. Default unit: byte.

    You can also set the unit to KB, MB, or GB.

    sag rxBit/s The inbound data transfer rate of the SAG APP instance. Unit: bit/s.
    sag txBit/s The outbound data transfer rate of the SAG APP instance. Unit: bit/s.
    sag rxDropPackets The inbound packet loss rate of the SAG APP instance. Unit: packet/min.
    sag txDropPackets The outbound packet loss rate of the SAG APP instance. Unit: packet/min.
    sag rxBytesHour The amount of inbound data of the SAG APP instance per hour. Default unit: byte.

    You can also set the unit to KB, MB, or GB.

    sag txBytesHour The amount of outbound data of the SAG APP instance per hour. Default unit: byte.

    You can also set the unit to KB, MB, or GB.