You can call this operation to delete a static route.

Debugging

OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer. OpenAPI Explorer dynamically generates the sample code of the operation for different SDKs.

Request parameters

Parameter Type Required Example Description
Action String No DeleteSagStaticRoute

The operation that you want to perform.

Set the value to DeleteSagStaticRoute.

DestinationCidr String Yes 192.XX.XX.0/24

The destination CIDR block.

PortName String Yes 0

The name of the port.

RegionId String Yes cn-shanghai

The ID of the region where the Smart Access Gateway (SAG) instance is deployed.

SmartAGId String Yes sag-whfn****

The ID of the SAG instance.

SmartAGSn String Yes sag32a30****

The serial number of the SAG device associated with the SAG instance.

Vlan String No 1

The VLAN ID.

Valid values: 0 indicates a physical port.1 to 4094 indicates that VLANs are supported.

Response parameters

Parameter Type Example Description
RequestId String A53F71B6-7577-492A-A0CD-C7D3DFFE2D0E

The ID of the request.

Examples

Sample requests

http(s)://smartag.cn-shanghai.aliyuncs.com/? Action=DeleteSagStaticRoute
&DestinationCidr=192.XX.XX.0/24
&PortName=0
&RegionId=cn-shanghai
&SmartAGId=sag-whfn****
&SmartAGSn=sag32a30****
&<Common request parameters>

Sample success responses

XML format

<DeleteSagStaticRouteResponse>
     <RequestId>A53F71B6-7577-492A-A0CD-C7D3DFFE2D0E</RequestId>
</DeleteSagStaticRouteResponse>

JSON format

{
"RequestId": "A53F71B6-7577-492A-A0CD-C7D3DFFE2D0E"
}

Error codes

HttpCode Error code Error message Description
400 Sag.PortNotExist The specified port does not exist. The specified port does not exist.
400 Sag.StaticRouteNotExist The specified static route does not exist. The specified static route does not exist.

For a list of error codes, visit the API Error Center.