You can call this operation to modify a static route.


OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer. OpenAPI Explorer dynamically generates the sample code of the operation for different SDKs.

Request parameters

Parameter Type Required Example Description
Action String No ModifySagStaticRoute

The operation that you want to perform.

Set the value to ModifySagStaticRoute.

DestinationCidr String Yes 192.XX.XX.0/24

The destination CIDR block.

NextHop String Yes 192.XX.XX.1

The IP address of the next hop.

PortName String Yes 0

The name of the port.

RegionId String Yes cn-shanghai

The ID of the region where the Smart Access Gateway (SAG) instance is deployed.

SmartAGId String Yes sag-whfn****

The ID of the SAG instance.

SmartAGSn String Yes sag32a30****

The serial number of the SAG device associated with the SAG instance.

Vlan String No 1


Valid values: 0 indicates a physical port.1 to 4094 indicates that VLANs are supported.

Response parameters

Parameter Type Example Description
RequestId String ACA5A9FE-77FA-4C09-980B-5C353160FA4A

The ID of the request.


Sample requests

http(s):// Action=ModifySagStaticRoute
&<Common request parameters>

Sample success responses

XML format


JSON format

"RequestId": "ACA5A9FE-77FA-4C09-980B-5C353160FA4A"

Error codes

HttpCode Error code Error message Description
400 Sag.PortNotExist The specified port does not exist. The specified port does not exist.
400 Sag.PortRoleInvalid The port role is invalid. The port role is invalid.
400 Sag.EccVlanNotExist The specified dedicated VLAN does not exist. VLANs are not enabled for the leased line port.
400 Sag.StaticRouteNotExist The specified static route does not exist. The specified static route does not exist.

For a list of error codes, visit the API Error Center.