This topic describes how to migrate data from a user-created MySQL database that is connected over Express Connect, VPN Gateway, or Smart Access Gateway to an ApsaraDB RDS for MySQL database by using Data Transmission Service (DTS). DTS supports schema migration, full data migration, and incremental data migration. When you migrate data from a user-created MySQL database, you can select all of the supported migration types to ensure service continuity.

Prerequisites

  • The version of the user-created MySQL database is 5.1, 5.5, 5.6, 5.7, or 8.0.
  • The available storage space of the ApsaraDB RDS for MySQL instance is larger than the total size of the data in the user-created MySQL database.
  • The on-premises network to which the user-created MySQL database belongs is connected to Alibaba Cloud over Express Connect, VPN Gateway, or Smart Access Gateway.
    Note For more information about how to connect a data center to a virtual private cloud (VPC), see Connect to local IDCs.

Precautions

  • DTS uses read and write resources of the source and destination databases during full data migration. This may increase the loads of the database servers. If the database performance is unfavorable, the specification is low, or the data volume is large, database services may become unavailable. For example, DTS occupies a large amount of read and write resources in the following cases: a large number of slow SQL queries are performed on the source database, the tables have no primary keys, or a deadlock occurs in the destination database. Before you migrate data, evaluate the impact of data migration on the performance of the source and destination databases. We recommend that you migrate data during off-peak hours. For example, you can migrate data when the CPU utilization of the source and destination databases is less than 30%.
  • The tables to be migrated in the source database must have PRIMARY KEY or UNIQUE constraints and all fields must be unique. Otherwise, the destination database may contain duplicate data records.
  • DTS uses the ROUND(COLUMN,PRECISION) function to retrieve values from columns of the FLOAT or DOUBLE data type. If you do not specify a precision, DTS sets the precision for the FLOAT data type to 38 digits and the precision for the DOUBLE data type to 308 digits. You must check whether the precision settings meet your business requirements.
  • DTS automatically creates a destination database in the ApsaraDB RDS for MySQL instance. However, if the name of the source database is invalid, you must manually create a database in the ApsaraDB RDS for MySQL instance before you configure the data migration task.
    Note For more information about the naming conventions of ApsaraDB RDS for MySQL databases and how to create a database, see Create a database on an ApsaraDB RDS for MySQL instance.
  • If a data migration task fails, DTS automatically resumes the task. Before you switch your workloads to the destination instance, stop or release the data migration task. Otherwise, the data in the source database will overwrite the data in the destination instance after the task is resumed.

Billing

Migration type Instance configuration fee Internet traffic fee
Schema migration and full data migration Free of charge Charged only when data is migrated from Alibaba Cloud over the Internet. For more information, see Pricing.
Incremental data migration Charged. For more information, see Pricing.

Migration types

  • Schema migration

    DTS migrates the schemas of the required objects to the destination instance. DTS supports schema migration for the following types of objects: table, view, trigger, stored procedure, and function.

    Note
    • During schema migration, DTS changes the value of the SECURITY attribute from DEFINER to INVOKER for views, stored procedures, and functions.
    • DTS does not migrate user information. Before a user can call views, stored procedures, and functions of the destination database, you must grant the read and write permissions to the user.
  • Full data migration
    DTS migrates historical data of the required objects from the user-created MySQL database to the destination database in the ApsaraDB RDS for MySQL instance.
    Note During full data migration, concurrent INSERT operations cause fragmentation in the tables of the destination database. After full data migration is complete, the tablespace of the destination database is larger than that of the source database.
  • Incremental data migration

    After full data migration is complete, DTS retrieves binary log files from the user-created MySQL database. Then, DTS synchronizes incremental data from the user-created MySQL database to the destination ApsaraDB RDS for MySQL instance. Incremental data migration allows you to ensure service continuity when you migrate data from a user-created MySQL database to Alibaba Cloud.

SQL operations that can be synchronized during incremental data migration

Operation type SQL statements
DML INSERT, UPDATE, DELETE, and REPLACE
DDL
  • ALTER TABLE and ALTER VIEW
  • CREATE FUNCTION, CREATE INDEX, CREATE PROCEDURE, CREATE TABLE, and CREATE VIEW
  • DROP INDEX and DROP TABLE
  • RENAME TABLE
  • TRUNCATE TABLE

Permissions required for database accounts

Database Schema migration Full data migration Incremental data migration
User-created MySQL database The SELECT permission The SELECT permission The REPLICATION SLAVE, REPLICATION CLIENT, SHOW VIEW, and SELECT permissions
ApsaraDB RDS for MySQL instance The read and write permissions The read and write permissions The read and write permissions

For more information about how to create and authorize a database account, see the following topics:

Before you begin

  1. Create an account for a user-created MySQL database and configure binary logging.
  2. Configure a route between DTS and Express Connect, VPN Gateway, or Smart Access Gateway.

Procedure

  1. Log on to the DTS console.
  2. In the left-side navigation pane, click Data Migration.
  3. At the top of the Migration Tasks page, select the region where the destination cluster resides.
    Select a region
  4. In the upper-right corner of the page, click Create Migration Task.
  5. Configure the source and destination databases.
    Configure the source and destination databases
    Section Parameter Description
    N/A Task Name DTS automatically generates a task name. We recommend that you specify an informative name for easy identification. You do not need to use a unique task name.
    Source Database Instance Type Select User-Created Database Connected over Express Connect, VPN Gateway, or Smart Access Gateway.
    Instance Region Select the region to which the VPC that is connected to Express Connect, VPN Gateway, or Smart Access Gateway belongs.
    Peer VPC Select the VPC that is connected to Express Connect, VPN Gateway, or Smart Access Gateway.
    Database Type Select MySQL.
    IP Address Enter the endpoint that is used to access the user-created MySQL database.
    Port Number Enter the service port number of the user-created MySQL database. The default port number is 3306.
    Database Account Enter the account of the user-created MySQL database. For more information about the permissions that are required for the account, see #section_31k_oq1_w0z.
    Database Password Enter the password of the source database account.
    Note After you specify the source database parameters, click Test Connectivity next to Database Password to verify whether the specified parameters are valid. If the specified parameters are valid, the Passed message appears. If the Failed message appears, click Check next to Failed. Modify the source database parameters based on the check results.
    Destination Database Instance Type Select RDS Instance.
    Instance Region Select the region where the destination RDS instance resides.
    RDS Instance ID Select the ID of the destination RDS instance.
    Database Account Enter the database account of the destination RDS instance. For more information about the permissions that are required for the account, see #section_31k_oq1_w0z.
    Database Password Enter the password of the destination database account.
    Note After you specify the destination database parameters, click Test Connectivity next to Database Password to verify whether the parameters are valid. If the specified parameters are valid, the Passed message appears. If the Failed message appears, click Check next to Failed. Modify the destination database parameters based on the check results.
    Encryption Select Non-encrypted or SSL-encrypted. If you want to select SSL-encrypted, you must enable SSL encryption for the RDS instance before you configure the data migration task. For more information, see Configure SSL encryption on an ApsaraDB RDS for MySQL instance.
    Note The Encryption parameter is available only for regions in mainland China and the China (Hong Kong) region.
  6. In the lower-right corner of the page, click Set Whitelist and Next.
    Note DTS adds the CIDR blocks of DTS servers to the whitelist of the ApsaraDB RDS for MySQL instance. This ensures that DTS servers can connect to the destination RDS instance.
  7. Select the migration types and the objects to be migrated.
    Select the objects to be migrated and the migration types
    Configuration Description
    Migration Types
    • To perform only full migration, select both Schema Migration and Full Data Migration.
    • To ensure service continuity during data migration, select Schema Migration, Full Data Migration, and Incremental Data Migration.
    Notice If Incremental Data Migration is not selected, do not write new data to the source database during full data migration. This ensures that the data between the source and destination databases is consistent.
    Objects

    In the Available section, select the objects to be migrated. Then, click the Rightwards arrow icon to add them to the Selected section.

    Notice
    • You can select databases, tables, and columns as the objects to be migrated.
    • By default, the name of the migrated object in the destination database remains consistent with the name of the object in the source database. You can change the names of the objects that are migrated to the destination database by using the object name mapping feature. For more information, see Object name mapping.
    • If you use the object name mapping feature on an object, other objects that are dependent on the object may fail to be migrated.
  8. In the lower-right corner of the page, click Precheck.
    Notice
    • Before you can start the data migration task, a precheck is performed. DTS can migrate data only if the precheck is past.
    • If the precheck fails, click the Prompt icon next to each failed item to view details. Fix the issues as prompted and run the precheck again.
  9. After the precheck is past, click Next.
  10. In the Confirm Settings dialog box, specify the Channel Specification parameter and select Data Transmission Service (Pay-As-You-Go) Service Terms.
  11. Click Buy and Start to start the data migration task.
    • Schema migration and full data migration

      Do not manually stop the migration task. Otherwise, the data may be incomplete. You need only to wait until the migration task is complete. The migration task can automatically stop.

    • Schema migration, full data migration, and incremental data migration

      The migration task cannot automatically stop. You must manually stop the migration task.

      Notice Manually stop the migration task at an appropriate time. For example, you can stop the migration task during off-peak hours of your business or before you switch your business to the destination cluster.
      1. Wait until Incremental Data Migration and The migration task is not delayed appear in the progress bar of the migration task. Then, stop writing data to the source database for a few minutes. The delay time may appear in the status for incremental migration.
      2. Wait until the status of Incremental Data Migration for the migration task changes to The migration task is not delayed again. Then, manually stop the migration task.Stop an incremental migration task
  12. Switch your workloads to the ApsaraDB RDS for MySQL instance.