×
Community Blog Use Your Storage Space More Effectively with ZFS: Exploring vdevs

Use Your Storage Space More Effectively with ZFS: Exploring vdevs

In this tutorial series, we will learn how to optimize file storage on a Linux server to ensure data integrity using ZFS.

By Alexandru Andrei, Alibaba Cloud Tech Share Author. Tech Share is Alibaba Cloud's incentive program to encourage the sharing of technical knowledge and best practices within the cloud community.

The previous article in this series can be found here: Use Your Storage Space More Effectively with ZFS - Introduction.

We will be using Ubuntu in this tutorial because, at the moment, it has the best support for ZFS (on Linux). The other distributions offer ZFS as a separate module that has to be compiled with DKMS every time the kernel is updated. This can occasionally cause problems. Ubuntu includes the pre-compiled module natively in every kernel package.

It's worth noting that the BSD operating systems integrate ZFS exceptionally well, but the platform is used by fewer users and might seem slightly alien to people used with Linux-based environments. If you'd prefer to use an OS like FreeBSD, most of the commands described below will have a very similar syntax (e.g. devices will have different names there, so you'd have to replace words like vdb with the BSD equivalents).

Prerequisites

Log in to the ECS Cloud Console, create a new instance and choose the newest Ubuntu distribution that is available. Make sure the version number starts with an even number such as 16, 18, 20, as these are Long Term Support, stable releases. Odd version numbers represent development releases which don't have the same level of stability and support longevity. Assign at least 2GB of memory to the instance and go with 4GB or more if you want to improve performance. The more memory ZFS has, the more data it can cache so that frequently accessed information is delivered much faster to users and applications.

If you intend to add a lot of Cloud Disks to your instance, allocating two or more CPU cores can improve performance by distributing input/output requests across multiple computing units.

To be able to learn about and test every kind of vdev, we will be adding 4 data disks to the instance:

1

For testing purposes any size will work. In production systems however, the larger the size, the more IOPS you get, which leads to better performance. SSDs are much faster than Ultra Cloud disks. As a compromise between cost optimization, performance and ability to allocate more to your storage pool, you can use Ultra Cloud Disks for data and SSD for cache. This will be explained later, in the section dealing with cache vdevs (L2ARC).

For reference, you can create and attach Cloud Disks even after the instance has been created. So you can make changes to your ZFS storage pool whenever and however you see fit, without having to reboot your system.

Install the ZFS Utilities

Connect to your instance with an SSH client and log in as root. Upgrade all packages to bring your system up to date with all of the latest bug and security fixes:

    apt update && apt upgrade

Reboot:

    systemctl reboot

Wait at least 30 seconds so that the instance has time to reload the operating system and then log back in as root. Afterward, install the ZFS utilities:

    apt install zfsutils-linux

Create Disk vdevs

The benefits of this structure are:

  1. You get to use all of the disks' capacity to store data since you don't have to dedicate any space to redundancy (usable storage space is maximized).
  2. Adding multiple vdevs of this type in a single pool gives you the largest increases in read/write performance.
  3. Can be converted to a redundant vdev later on by attaching a device and creating a mirror (zpool attach). You will have to mirror each disk vdev in the pool though.

But this is a non-redundant type of vdev, meaning:

  1. Only one copy of data exists and if any disk vdev in a pool fails, you lose the entire pool.
  2. ZFS can't automatically recover corrupted data (no self healing benefits)

This type of vdev should only be used with data that can be easily recovered. Since Alibaba Cloud Disks have their own redundancy methods, the risks involved with using this type of virtual device are significantly reduced but are still higher than those of mirror and Raid-Z vdevs.

To view a list of disks and partitions available on your system:

    lsblk

vda represents the first disk (and in this case the system disk, where the operating system is stored). vda1 is the first partition on the first disk, vdb is the second disk, vdc the third, and so on.

Create a pool named "first", containing two disks:

    zpool create -f first vdb vdc

Be very careful when using this command, so that you don't mix up device names and overwrite useful data. You can first use the zpool command without the -f (force) parameter, which can give you warnings like these about possible mistakes:

root@ubuntu:~# zpool create first vdb vdc
invalid vdev specification
use '-f' to override the following errors:
/dev/vdb1 is part of potentially active pool 'fourth'

In our case, we have to use -f initially, otherwise we would get a message like this:

root@ubuntu:~# zpool create second vdd vde
invalid vdev specification
use '-f' to override the following errors:
/dev/vdd does not contain an EFI label but it may contain partition
information in the MBR.
/dev/vde does not contain an EFI label but it may contain partition
information in the MBR.

You can view pool status and structure with:

    zpool status

The output in this case should look like this:

root@ubuntu:~# zpool status
  pool: first
 state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    first       ONLINE       0     0     0
      vdb       ONLINE       0     0     0
      vdc       ONLINE       0     0     0

errors: No known data errors

Under "NAME" we find the name of the pool, in this case "first", and under that we find the names of the vdevs that compose it: "vdb" and "vdc". In case of disk vdevs, this coincides with the name of the physical devices. In case of redundant vdevs, we will see a variation: under the pool name we will find the names of the mirror or Raid-Z vdevs that it contains and under each vdev name we will see the names of the physical devices these contain. You will find examples in the next sections.

"READ", "WRITE" and "CKSUM" indicate the number of errors ZFS has encountered when trying to read, write or checksum data. When they don't indicate 0, we should run commands such as zpool scrub to scan disks for other possible errors, wait for it to finish and then replace the faulty devices with zpool replace commands.

To view information about used and free space in the pool, fragmentation, etc.:

    zpool list

For a more detailed view, listing the same info for every physical device:

    zpool list -v

Note however that this shows "raw" used and free space, meaning it also keeps track of what is used and what is available by/for redundancy and other metadata. If you want to see statistics regarding space used/available for storing your files, you should use zfs list. More about that in the third tutorial, where we will explore various types of ZFS datasets. Example: in a mirror vdev where you have two 50GB hard disks. "zpool list" will show approximately 100GB usable space, while "zfs list" will show only 50.

To add more disk vdevs to the "first" pool:

    zpool add -f first vdd vde

This shows how easy it is to expand a storage pool. However, it should be noted that performance gains are maximized only when all vdevs in a pool have the same amount of storage space available. Preferably, the physical devices composing the vdevs should also have the same size. Let's see how different sizes can be detrimental: imagine that at some point in the future, one of your virtual devices is left with only 100GB of space available and you add a 900GB disk to expand the pool. In such a case, when you write 10GB of data, ZFS would send approximately 1GB to the device with 100GB available and 9GB to the device with 900GB free space (it attempts to fill devices at the same rate). If writing on the first device would take 10 seconds, writing on the second will take 90 seconds. In such a case, to keep performance optimal, it would be better to create a second pool and add two 450GB disks + size of the vdev you want to replace. You could end up with two 1 terabyte disks. Then you can copy the data from the old pool to the new pool. Now reads and writes would be distributed evenly, so for a 10GB write, 5GB would be written to disk1 and 5GB to disk2. In this case the write would complete in 50 seconds instead of 90. An even better alternative to grow a pool is to replace smaller size devices in a vdev with bigger ones, one by one, using the zpool replace command and then, when all of them have been replaced, zpool online -e on any of the physical device names to grow the pool. Full syntax of commands is shown when typing zpool replace and zpool online.

Destroy this pool so we can move on to the next type of vdev:

    zpool destroy first

Create Mirror vdev

Mirrors have the following advantages:

  1. Compared to Raid-Z, resilvering (rebuilding lost data) is faster and less stressful on the system and physical devices.
  2. The structure is flexible, you can add devices to a mirror to increase reliability and you can remove devices when more than two are used (with zpool detach).
  3. Since all of the physical devices contain the same data, ZFS can read it faster by splitting requests across every disk.

The cost of mirrors:

  1. A large part of the storage capacity has to be dedicated to redundancy, giving you the least amount of usable space out of all vdevs.
  2. Since every physical device has to store the same data, write performance doesn't increase (you get the same performance you would get out of a single disk).

To create a pool that consists of a mirror vdev (we'll name it "second"):

    zpool create -f second mirror vdb vdc

The physical devices added to a mirror should have the same size.

Now zpool status will show:

root@ubuntu:~# zpool status
  pool: second
 state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    second      ONLINE       0     0     0
      mirror-0  ONLINE       0     0     0
        vdb     ONLINE       0     0     0
        vdc     ONLINE       0     0     0

errors: No known data errors

If vdb encounters partial failures such as bad sectors, ZFS can automatically recover lost information from vdc. Even if one of the devices fails entirely, data can be recovered from the other healthy device(s). To increase reliability, you can add even more physical devices to a mirror:

    zpool attach -f second vdb vdd

Instead of "vdb" we could have also used "vdc" since the parameter after the pool name signifies what physical device to mirror and vdb and vdc are identical. Now we can lose two devices and still recover.

Just like in the case of disk vdevs, data can be striped across multiple mirror vdevs to improve read/write performance. Instead of a pool consisting of one mirror with four devices, you create a pool consisting of two mirrors, each with two devices. Let's destroy and then recreate the initial mirror:

    zpool destroy second
    zpool create -f second mirror vdb vdc

Now add another mirror to the same pool:

    zpool add -f second mirror vdd vde

New output of zpool status will be:

root@ubuntu:~# zpool status
  pool: second
 state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    second      ONLINE       0     0     0
      mirror-0  ONLINE       0     0     0
        vdb     ONLINE       0     0     0
        vdc     ONLINE       0     0     0
      mirror-1  ONLINE       0     0     0
        vdd     ONLINE       0     0     0
        vde     ONLINE       0     0     0

errors: No known data errors

In such a structure, if vdb and vdd fail, the pool will still have valid data. We need at least one healthy device in each mirror vdev (such as mirror-0, mirror-1, etc.)

Destroy this pool so we can move to the next section:

    zpool destroy second

Create Raid-Z vdev

In a Raid-Z array, what is called parity is added to all data so that it can be reconstructed in case of partial failures. Parity information is distributed to all physical devices, so there is no dedicated device that stores it. With single parity, data can be recovered after losing any one of the storage devices. With double parity (Raid-Z2) you can lose two and with triple you can lose three.

Raid-Z also comes with advantages and disadvantages. The advantages it offers:

  1. While mirrors made of 2 devices cut usable space to 50%, 3 devices to 33% and so on, Raid-Z offers more usable space if you use more devices per vdev. For example, a single parity (Raid-Z1) made of 3 identical devices, offers 66% of usable storage (⅔ - 2 devices out of 3 for data, 1 for parity). 4 devices give you 75% usable storage (¾, 3 out of 4 for data, 1 for parity) and so on. Avoid using too many devices per vdev though, since that leads to increased potential for failure, plus more computation power needed for parity calculations and resilvering.
  2. Better write performance, in comparison to mirrors.

The disadvantages:

  1. Resilvering Raid-Z is slower than resilvering mirrors.
  2. Inflexible, you can't add/remove devices to/from a Raid-Z vdev after it has been created.
  3. Read performance is slightly lower than what you get with mirrors.

To create a Raid-Z1 vdev with four devices:

    zpool create -f third raidz1 vdb vdc vdd vde

To create a Raid-Z2 vdev, you just change raidz1 to raidz2.

Destroy the pool so we can go through another example in the next section:

    zpool destroy third

Create Log (SLOG), Cache (L2ARC) and Spare vdevs

As previously mentioned, log and cache vdevs are useful only if the physical devices used to back them are faster than those used for storing data. Example: you use hard-disks in a Raid-Z2 array and you add an SSD to a log vdev and another SSD to a cache vdev to significantly increase your storage pool performance. This type of structure is useful to decrease financial costs, especially when you need enormous amounts of storage. But if cost is not an issue or you don't need to store very large amounts of data, it's easier to use faster storage devices in your pool, exclusively. This will make your array perform slightly better than a hybrid hard-disk + SSD array. To simplify:

  1. Pool consisting of slow storage devices in disk, mirror or Raid-Z vdevs, without SLOG and L2ARC has the weakest performance.
  2. Pool made of hard-disks plus faster devices like SSDs in log and cache vdevs will perform significantly better
  3. Pool made entirely of fast storage devices, without log and cache devices will perform the best, however the differences between "2" and "3" are less impressive than the differences between "1" and "2".

Create a pool:

    zpool create -f fourth vdb vdc

To add a log vdev:

    zpool add -f fourth log vdd

And to add a cache vdev:

    zpool add -f fourth cache vde

The log device usually requires very little space, even a few GB suffice. The size of the cache is a question of "What percentage of my data will be accessed very often?". For example, you may have a large database of 100GB that grows fast. But usually, only the last 20GB are accessed very often, the rest is just historic data that almost nobody uses when it's old. In this case you would use an SSD cache device sized around 20GB.

zpool status will show the structure of our pool with nicely formatted text that makes it easy to see how everything is connected:

root@ubuntu:~# zpool status
  pool: fourth
 state: ONLINE
  scan: none requested
config:

    NAME        STATE     READ WRITE CKSUM
    fourth      ONLINE       0     0     0
      vdb       ONLINE       0     0     0
      vdc       ONLINE       0     0     0
    logs
      vdd       ONLINE       0     0     0
    cache
      vde       ONLINE       0     0     0

errors: No known data errors

In the next tutorial, Use Your Storage Space More Effectively with ZFS - Exploring Datasets, we will learn how to make our storage pools useful by utilizing datasets such as filesystems, snapshots, clones and volumes.

0 0 0
Share on

Alibaba Clouder

1,403 posts | 218 followers

You may also like

Comments

Alibaba Clouder

1,403 posts | 218 followers

Related Products